Pobieranie kolejnych rzeczy podanych na wejściu i konstruowanie wartości.¶
Te działania są użyteczne przy tworzeniu swoich własnych zadań rozszerzających i rozszerzających sposobów działania. Dodatkowe informacje i przykłady dostępne są w Rozszerzony i wbudowany interpreter Python.
The first three of these functions described, PyArg_ParseTuple()
,
PyArg_ParseTupleAndKeywords()
, and PyArg_Parse()
, all use format
strings which are used to tell the function about the expected arguments. The
format strings use the same syntax for each of these functions.
Parsowanie argumentów¶
napis kształtujący może być pusty lub składać się z „jednostek kształtujących”. Jednostka ukształtowania opisuje jeden pytonowski przedmiot; jest to zazwyczaj jedna litera, lub kolejką jednostek ukształtowania w ujętych w nawias. Z kilkoma wyjątkami, jednostka ukształtowania, która nie jest kolejką jednostek ujętą w nawias zwykle odpowiada pojedynczo umiejscowionej rzeczy przekazywanej dla tych zadań. W poniższych zapisach cytat jest jednostką kształtującą; polecenie ujęte w nawias okrągły ( ) oznacza typ przedmiotu w języku pytonowskim, który odpowiada jednostce kształtującej, a zapis ujęty w nawiasie kwadratowym [ ] określa typ przedmiotu / przedmiotów w języku C, którego miejsce powinno zostać wskazane i przekazane dla zadania.
Napisy i skrzynki wymiany¶
These formats allow accessing an object as a contiguous chunk of memory. You don’t have to provide raw storage for the returned unicode or bytes area.
In general, when a format sets a pointer to a buffer, the buffer is
managed by the corresponding Python object, and the buffer shares
the lifetime of this object. You won’t have to release any memory yourself.
The only exceptions are es
, es#
, et
and et#
.
However, when a Py_buffer
structure gets filled, the underlying
buffer is locked so that the caller can subsequently use the buffer even
inside a Py_BEGIN_ALLOW_THREADS
block without the risk of mutable data
being resized or destroyed. As a result, you have to call
PyBuffer_Release()
after you have finished processing the data (or
in any early abort case).
Bufory nie są zakończone znakiem NULL, chyba że zaznaczono inaczej.
Some formats require a read-only bytes-like object, and set a
pointer instead of a buffer structure. They work by checking that
the object’s PyBufferProcs.bf_releasebuffer
field is NULL
,
which disallows mutable objects such as bytearray
.
Informacja
For all #
variants of formats (s#
, y#
, etc.), the type of
the length argument (int or Py_ssize_t
) is controlled by
defining the macro PY_SSIZE_T_CLEAN
before including
Python.h
. If the macro was defined, length is a
Py_ssize_t
rather than an int
. This behavior will change
in a future Python version to only support Py_ssize_t
and
drop int
support. It is best to always define PY_SSIZE_T_CLEAN
.
s
(str
) [const char *]Convert a Unicode object to a C pointer to a character string. A pointer to an existing string is stored in the character pointer variable whose address you pass. The C string is NUL-terminated. The Python string must not contain embedded null code points; if it does, a
ValueError
exception is raised. Unicode objects are converted to C strings using'utf-8'
encoding. If this conversion fails, aUnicodeError
is raised.Informacja
This format does not accept bytes-like objects. If you want to accept filesystem paths and convert them to C character strings, it is preferable to use the
O&
format withPyUnicode_FSConverter()
as converter.Zmienione w wersji 3.5: Previously,
TypeError
was raised when embedded null code points were encountered in the Python string.s*
(str
or bytes-like object) [Py_buffer]This format accepts Unicode objects as well as bytes-like objects. It fills a
Py_buffer
structure provided by the caller. In this case the resulting C string may contain embedded NUL bytes. Unicode objects are converted to C strings using'utf-8'
encoding.s#
(str
, read-only bytes-like object) [const char *, int orPy_ssize_t
]Like
s*
, except that it doesn’t accept mutable objects. The result is stored into two C variables, the first one a pointer to a C string, the second one its length. The string may contain embedded null bytes. Unicode objects are converted to C strings using'utf-8'
encoding.z
(str
orNone
) [const char *]Like
s
, but the Python object may also beNone
, in which case the C pointer is set toNULL
.z*
(str
, bytes-like object orNone
) [Py_buffer]Like
s*
, but the Python object may also beNone
, in which case thebuf
member of thePy_buffer
structure is set toNULL
.z#
(str
, read-only bytes-like object orNone
) [const char *, int orPy_ssize_t
]Like
s#
, but the Python object may also beNone
, in which case the C pointer is set toNULL
.y
(read-only bytes-like object) [const char *]This format converts a bytes-like object to a C pointer to a character string; it does not accept Unicode objects. The bytes buffer must not contain embedded null bytes; if it does, a
ValueError
exception is raised.Zmienione w wersji 3.5: Previously,
TypeError
was raised when embedded null bytes were encountered in the bytes buffer.y*
(bytes-like object) [Py_buffer]This variant on
s*
doesn’t accept Unicode objects, only bytes-like objects. This is the recommended way to accept binary data.y#
(read-only bytes-like object) [const char *, int orPy_ssize_t
]Ten wariant
s#
nie akceptuje obiektów Unicode, a jedynie bajto-podobne obiekty.S
(bytes
) [PyBytesObject *]Requires that the Python object is a
bytes
object, without attempting any conversion. RaisesTypeError
if the object is not a bytes object. The C variable may also be declared asPyObject*
.Y
(bytearray
) [PyByteArrayObject *]Requires that the Python object is a
bytearray
object, without attempting any conversion. RaisesTypeError
if the object is not abytearray
object. The C variable may also be declared asPyObject*
.u
(str
) [const Py_UNICODE *]Convert a Python Unicode object to a C pointer to a NUL-terminated buffer of Unicode characters. You must pass the address of a
Py_UNICODE
pointer variable, which will be filled with the pointer to an existing Unicode buffer. Please note that the width of aPy_UNICODE
character depends on compilation options (it is either 16 or 32 bits). The Python string must not contain embedded null code points; if it does, aValueError
exception is raised.Zmienione w wersji 3.5: Previously,
TypeError
was raised when embedded null code points were encountered in the Python string.Deprecated since version 3.3, will be removed in version 3.12: Part of the old-style
Py_UNICODE
API; please migrate to usingPyUnicode_AsWideCharString()
.u#
(str
) [const Py_UNICODE *, int orPy_ssize_t
]This variant on
u
stores into two C variables, the first one a pointer to a Unicode data buffer, the second one its length. This variant allows null code points.Deprecated since version 3.3, will be removed in version 3.12: Part of the old-style
Py_UNICODE
API; please migrate to usingPyUnicode_AsWideCharString()
.Z
(str
orNone
) [const Py_UNICODE *]Like
u
, but the Python object may also beNone
, in which case thePy_UNICODE
pointer is set toNULL
.Deprecated since version 3.3, will be removed in version 3.12: Part of the old-style
Py_UNICODE
API; please migrate to usingPyUnicode_AsWideCharString()
.Z#
(str
orNone
) [const Py_UNICODE *, int orPy_ssize_t
]Like
u#
, but the Python object may also beNone
, in which case thePy_UNICODE
pointer is set toNULL
.Deprecated since version 3.3, will be removed in version 3.12: Part of the old-style
Py_UNICODE
API; please migrate to usingPyUnicode_AsWideCharString()
.U
(str
) [PyObject *]Requires that the Python object is a Unicode object, without attempting any conversion. Raises
TypeError
if the object is not a Unicode object. The C variable may also be declared asPyObject*
.w*
(read-write bytes-like object) [Py_buffer]This format accepts any object which implements the read-write buffer interface. It fills a
Py_buffer
structure provided by the caller. The buffer may contain embedded null bytes. The caller have to callPyBuffer_Release()
when it is done with the buffer.es
(str
) [const char *encoding, char **buffer]Ten wariant
s
jest używany do zakodowania Unicode w buforze znaków. To działa tylko dla zakodowanych danych bez osadzonych znaków NUL.This format requires two arguments. The first is only used as input, and must be a
const char*
which points to the name of an encoding as a NUL-terminated string, orNULL
, in which case'utf-8'
encoding is used. An exception is raised if the named encoding is not known to Python. The second argument must be achar**
; the value of the pointer it references will be set to a buffer with the contents of the argument text. The text will be encoded in the encoding specified by the first argument.PyArg_ParseTuple()
will allocate a buffer of the needed size, copy the encoded data into this buffer and adjust *buffer to reference the newly allocated storage. The caller is responsible for callingPyMem_Free()
to free the allocated buffer after use.et
(str
,bytes
orbytearray
) [const char *encoding, char **buffer]Podobnie jak
es
z wyjątkiem tego, że obiekty ciągów znaków są przekazywane dalej bez ich zapisywania. Zamiast tego implementacja zakłada, że obiekt łańcucha znaków wykorzystuje kodowanie przekazane jako parametr.es#
(str
) [const char *encoding, char **buffer, int orPy_ssize_t
*buffer_length]Ten wariant
s#
używany jest do kodowania Unicode w buforze znaków. W przeciwieństwie do formatues
, ten wariant pozwala wprowadzać dane zawierające znaki NUL.It requires three arguments. The first is only used as input, and must be a
const char*
which points to the name of an encoding as a NUL-terminated string, orNULL
, in which case'utf-8'
encoding is used. An exception is raised if the named encoding is not known to Python. The second argument must be achar**
; the value of the pointer it references will be set to a buffer with the contents of the argument text. The text will be encoded in the encoding specified by the first argument. The third argument must be a pointer to an integer; the referenced integer will be set to the number of bytes in the output buffer.Istnieją dwa tryby pracy:
If *buffer points a
NULL
pointer, the function will allocate a buffer of the needed size, copy the encoded data into this buffer and set *buffer to reference the newly allocated storage. The caller is responsible for callingPyMem_Free()
to free the allocated buffer after usage.If *buffer points to a non-
NULL
pointer (an already allocated buffer),PyArg_ParseTuple()
will use this location as the buffer and interpret the initial value of *buffer_length as the buffer size. It will then copy the encoded data into the buffer and NUL-terminate it. If the buffer is not large enough, aValueError
will be set.W obu przypadkach, *buffer_length jest ustawiany na długość zakodowanych danych z pominięciem zakańczającego znaku NUL.
et#
(str
,bytes
orbytearray
) [const char *encoding, char **buffer, int orPy_ssize_t
*buffer_length]Tak samo, jak w
es#
oprócz tego, że obiekty ciągu bajtów są przekazywane do funkcji bez ich zapisywania. Zamiast tego, implementacja zakłada że obiekt ciągu bajtów używa kodowania przekazywanego w parametrze.
Liczby¶
b
(int
) [unsigned char]Convert a nonnegative Python integer to an unsigned tiny int, stored in a C
unsigned char
.B
(int
) [unsigned char]Convert a Python integer to a tiny int without overflow checking, stored in a C
unsigned char
.h
(int
) [short int]Convert a Python integer to a C
short int
.H
(int
) [unsigned short int]Convert a Python integer to a C
unsigned short int
, without overflow checking.i
(int
) [int]Convert a Python integer to a plain C
int
.I
(int
) [unsigned int]Convert a Python integer to a C
unsigned int
, without overflow checking.l
(int
) [long int]Convert a Python integer to a C
long int
.k
(int
) [unsigned long]Convert a Python integer to a C
unsigned long
without overflow checking.L
(int
) [long long]Convert a Python integer to a C
long long
.K
(int
) [unsigned long long]Convert a Python integer to a C
unsigned long long
without overflow checking.n
(int
) [Py_ssize_t
]Convert a Python integer to a C
Py_ssize_t
.c
(bytes
orbytearray
of length 1) [char]Convert a Python byte, represented as a
bytes
orbytearray
object of length 1, to a Cchar
.Zmienione w wersji 3.3: Allow
bytearray
objects.C
(str
of length 1) [int]Convert a Python character, represented as a
str
object of length 1, to a Cint
.f
(float
) [float]Convert a Python floating point number to a C
float
.d
(float
) [double]Convert a Python floating point number to a C
double
.D
(complex
) [Py_complex]Convert a Python complex number to a C
Py_complex
structure.
Inne obiekty¶
O
(object) [PyObject *]Store a Python object (without any conversion) in a C object pointer. The C program thus receives the actual object that was passed. The object’s reference count is not increased. The pointer stored is not
NULL
.O!
(object) [typeobject, PyObject *]Store a Python object in a C object pointer. This is similar to
O
, but takes two C arguments: the first is the address of a Python type object, the second is the address of the C variable (of typePyObject*
) into which the object pointer is stored. If the Python object does not have the required type,TypeError
is raised.
O&
(object) [converter, anything]Convert a Python object to a C variable through a converter function. This takes two arguments: the first is a function, the second is the address of a C variable (of arbitrary type), converted to
void *
. The converter function in turn is called as follows:status = converter(object, address);
where object is the Python object to be converted and address is the
void*
argument that was passed to thePyArg_Parse*()
function. The returned status should be1
for a successful conversion and0
if the conversion has failed. When the conversion fails, the converter function should raise an exception and leave the content of address unmodified.If the converter returns
Py_CLEANUP_SUPPORTED
, it may get called a second time if the argument parsing eventually fails, giving the converter a chance to release any memory that it had already allocated. In this second call, the object parameter will beNULL
; address will have the same value as in the original call.Zmienione w wersji 3.1:
Py_CLEANUP_SUPPORTED
was added.p
(bool
) [int]Tests the value passed in for truth (a boolean predicate) and converts the result to its equivalent C true/false integer value. Sets the int to
1
if the expression was true and0
if it was false. This accepts any valid Python value. See Truth Value Testing for more information about how Python tests values for truth.Nowe w wersji 3.3.
(items)
(tuple
) [matching-items]Obiekt musi być sekwencją języka Python, której długość jest liczbą elementów formatu mierzoną w elementach. Argumenty języka C muszą odpowiadać poszczególnym jednostkom formatu w elementach. Jednostki formatu dla sekwencji mogą być zagnieżdżane.
Możliwe jest przekazywanie liczb całkowitych „długich” (liczb całkowitych, których wartość przekracza wartość stałej LONG_MAX
określoną dla danej architektury) chociaż żadne właściwe sprawdzenie zakresu nie jest wykonywane - najbardziej znaczące cyfry dwójkowe są w milczeniu obcinane, gdy docelowy obszar pamięci jest zbyt mały, aby przyjąć wartość (w rzeczywistości składnia jest odziedziczona po rzutowaniu z języka C — twoje doświadczenia mogą się różnić).
Kilka innych znaków ma jeszcze znaczenie w ciągu formatu. Nie mogą one wystąpić wewnątrz zagnieżdżonych nawiasach okrągłych. Są to:
|
Indicates that the remaining arguments in the Python argument list are optional. The C variables corresponding to optional arguments should be initialized to their default value — when an optional argument is not specified,
PyArg_ParseTuple()
does not touch the contents of the corresponding C variable(s).$
PyArg_ParseTupleAndKeywords()
only: Indicates that the remaining arguments in the Python argument list are keyword-only. Currently, all keyword-only arguments must also be optional arguments, so|
must always be specified before$
in the format string.Nowe w wersji 3.3.
:
The list of format units ends here; the string after the colon is used as the function name in error messages (the „associated value” of the exception that
PyArg_ParseTuple()
raises).;
Na tym kończy się lista jednostek formatu; ciąg po średniku jest traktowany jako informacja o błędzie do użycia zamiast automatycznej wiadomości o błędzie. Znaki dwukropka
:
i średnika;
wzajemnie się wykluczają.
Zwróć uwagę, że każde odniesienie do obiektu Pythona które jest dostarczone do wywołującego funkcję jest odniesieniem pożyczonym; nie zmniejsza ich liczby odniesień!
Dodatkowe parametry przekazywane do tych funkcji muszą być adresami zmiennych których typ jest określany przez ciąg formatu; są one używane do przechowywania wartości z krotki wejściowej. Jest parę przypadków, jak opisuje to lista jednostek formatu powyżej, gdzie te parametry są używane jako wprowadzane wartości; w takich przypadku powinny one odpowiadać temu, co jest określone we właściwych im jednostach formatu.
For the conversion to succeed, the arg object must match the format
and the format must be exhausted. On success, the
PyArg_Parse*()
functions return true, otherwise they return
false and raise an appropriate exception. When the
PyArg_Parse*()
functions fail due to conversion failure in one
of the format units, the variables at the addresses corresponding to that
and the following format units are left untouched.
Funkcje interfejsu programowania aplikacji¶
-
int
PyArg_ParseTuple
(PyObject *args, const char *format, ...)¶ Parse the parameters of a function that takes only positional parameters into local variables. Returns true on success; on failure, it returns false and raises the appropriate exception.
-
int
PyArg_VaParse
(PyObject *args, const char *format, va_list vargs)¶ Identical to
PyArg_ParseTuple()
, except that it accepts a va_list rather than a variable number of arguments.
-
int
PyArg_ParseTupleAndKeywords
(PyObject *args, PyObject *kw, const char *format, char *keywords[], ...)¶ Parse the parameters of a function that takes both positional and keyword parameters into local variables. The keywords argument is a
NULL
-terminated array of keyword parameter names. Empty names denote positional-only parameters. Returns true on success; on failure, it returns false and raises the appropriate exception.Zmienione w wersji 3.6: Added support for positional-only parameters.
-
int
PyArg_VaParseTupleAndKeywords
(PyObject *args, PyObject *kw, const char *format, char *keywords[], va_list vargs)¶ Identical to
PyArg_ParseTupleAndKeywords()
, except that it accepts a va_list rather than a variable number of arguments.
-
int
PyArg_ValidateKeywordArguments
(PyObject *)¶ Ensure that the keys in the keywords argument dictionary are strings. This is only needed if
PyArg_ParseTupleAndKeywords()
is not used, since the latter already does this check.Nowe w wersji 3.2.
-
int
PyArg_Parse
(PyObject *args, const char *format, ...)¶ Function used to deconstruct the argument lists of „old-style” functions — these are functions which use the
METH_OLDARGS
parameter parsing method, which has been removed in Python 3. This is not recommended for use in parameter parsing in new code, and most code in the standard interpreter has been modified to no longer use this for that purpose. It does remain a convenient way to decompose other tuples, however, and may continue to be used for that purpose.
-
int
PyArg_UnpackTuple
(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)¶ A simpler form of parameter retrieval which does not use a format string to specify the types of the arguments. Functions which use this method to retrieve their parameters should be declared as
METH_VARARGS
in function or method tables. The tuple containing the actual parameters should be passed as args; it must actually be a tuple. The length of the tuple must be at least min and no more than max; min and max may be equal. Additional arguments must be passed to the function, each of which should be a pointer to aPyObject*
variable; these will be filled in with the values from args; they will contain borrowed references. The variables which correspond to optional parameters not given by args will not be filled in; these should be initialized by the caller. This function returns true on success and false if args is not a tuple or contains the wrong number of elements; an exception will be set if there was a failure.This is an example of the use of this function, taken from the sources for the
_weakref
helper module for weak references:static PyObject * weakref_ref(PyObject *self, PyObject *args) { PyObject *object; PyObject *callback = NULL; PyObject *result = NULL; if (PyArg_UnpackTuple(args, "ref", 1, 2, &object, &callback)) { result = PyWeakref_NewRef(object, callback); } return result; }
The call to
PyArg_UnpackTuple()
in this example is entirely equivalent to this call toPyArg_ParseTuple()
:PyArg_ParseTuple(args, "O|O:ref", &object, &callback)
Budowanie wartości¶
-
PyObject*
Py_BuildValue
(const char *format, ...)¶ - Return value: New reference.
Create a new value based on a format string similar to those accepted by the
PyArg_Parse*()
family of functions and a sequence of values. Returns the value orNULL
in the case of an error; an exception will be raised ifNULL
is returned.Py_BuildValue()
does not always build a tuple. It builds a tuple only if its format string contains two or more format units. If the format string is empty, it returnsNone
; if it contains exactly one format unit, it returns whatever object is described by that format unit. To force it to return a tuple of size 0 or one, parenthesize the format string.When memory buffers are passed as parameters to supply data to build objects, as for the
s
ands#
formats, the required data is copied. Buffers provided by the caller are never referenced by the objects created byPy_BuildValue()
. In other words, if your code invokesmalloc()
and passes the allocated memory toPy_BuildValue()
, your code is responsible for callingfree()
for that memory oncePy_BuildValue()
returns.In the following description, the quoted form is the format unit; the entry in (round) parentheses is the Python object type that the format unit will return; and the entry in [square] brackets is the type of the C value(s) to be passed.
The characters space, tab, colon and comma are ignored in format strings (but not within format units such as
s#
). This can be used to make long format strings a tad more readable.s
(str
orNone
) [const char *]Convert a null-terminated C string to a Python
str
object using'utf-8'
encoding. If the C string pointer isNULL
,None
is used.s#
(str
orNone
) [const char *, int orPy_ssize_t
]Convert a C string and its length to a Python
str
object using'utf-8'
encoding. If the C string pointer isNULL
, the length is ignored andNone
is returned.y
(bytes
) [const char *]This converts a C string to a Python
bytes
object. If the C string pointer isNULL
,None
is returned.y#
(bytes
) [const char *, int orPy_ssize_t
]This converts a C string and its lengths to a Python object. If the C string pointer is
NULL
,None
is returned.z
(str
orNone
) [const char *]Same as
s
.z#
(str
orNone
) [const char *, int orPy_ssize_t
]Same as
s#
.u
(str
) [const wchar_t *]Convert a null-terminated
wchar_t
buffer of Unicode (UTF-16 or UCS-4) data to a Python Unicode object. If the Unicode buffer pointer isNULL
,None
is returned.u#
(str
) [const wchar_t *, int orPy_ssize_t
]Convert a Unicode (UTF-16 or UCS-4) data buffer and its length to a Python Unicode object. If the Unicode buffer pointer is
NULL
, the length is ignored andNone
is returned.U
(str
orNone
) [const char *]Same as
s
.U#
(str
orNone
) [const char *, int orPy_ssize_t
]Same as
s#
.i
(int
) [int]Convert a plain C
int
to a Python integer object.b
(int
) [char]Convert a plain C
char
to a Python integer object.h
(int
) [short int]Convert a plain C
short int
to a Python integer object.l
(int
) [long int]Convert a C
long int
to a Python integer object.B
(int
) [unsigned char]Convert a C
unsigned char
to a Python integer object.H
(int
) [unsigned short int]Convert a C
unsigned short int
to a Python integer object.I
(int
) [unsigned int]Convert a C
unsigned int
to a Python integer object.k
(int
) [unsigned long]Convert a C
unsigned long
to a Python integer object.L
(int
) [long long]Convert a C
long long
to a Python integer object.K
(int
) [unsigned long long]Convert a C
unsigned long long
to a Python integer object.n
(int
) [Py_ssize_t
]Convert a C
Py_ssize_t
to a Python integer.c
(bytes
of length 1) [char]Convert a C
int
representing a byte to a Pythonbytes
object of length 1.C
(str
of length 1) [int]Convert a C
int
representing a character to Pythonstr
object of length 1.d
(float
) [double]Convert a C
double
to a Python floating point number.f
(float
) [float]Convert a C
float
to a Python floating point number.D
(complex
) [Py_complex *]Convert a C
Py_complex
structure to a Python complex number.O
(object) [PyObject *]Pass a Python object untouched (except for its reference count, which is incremented by one). If the object passed in is a
NULL
pointer, it is assumed that this was caused because the call producing the argument found an error and set an exception. Therefore,Py_BuildValue()
will returnNULL
but won’t raise an exception. If no exception has been raised yet,SystemError
is set.S
(object) [PyObject *]Same as
O
.N
(object) [PyObject *]Same as
O
, except it doesn’t increment the reference count on the object. Useful when the object is created by a call to an object constructor in the argument list.O&
(object) [converter, anything]Convert anything to a Python object through a converter function. The function is called with anything (which should be compatible with
void*
) as its argument and should return a „new” Python object, orNULL
if an error occurred.(items)
(tuple
) [matching-items]Convert a sequence of C values to a Python tuple with the same number of items.
[items]
(list
) [matching-items]Convert a sequence of C values to a Python list with the same number of items.
{items}
(dict
) [matching-items]Convert a sequence of C values to a Python dictionary. Each pair of consecutive C values adds one item to the dictionary, serving as key and value, respectively.
If there is an error in the format string, the
SystemError
exception is set andNULL
returned.
-
PyObject*
Py_VaBuildValue
(const char *format, va_list vargs)¶ - Return value: New reference.
Identical to
Py_BuildValue()
, except that it accepts a va_list rather than a variable number of arguments.