Nouveautés de Python 2.0

Auteur:

A.M. Kuchling et Moshe Zadka

Introduction

Une nouvelle version de Python, la version 2.0, est sortie le 16 octobre 2000. Cet article traite des nouvelles fonctionnalités intéressantes de cette version, met en évidence d'autres changements utiles, et souligne quelques incompatibilités qui peuvent nécessiter la réécriture du code.

Python's development never completely stops between releases, and a steady flow of bug fixes and improvements are always being submitted. A host of minor fixes, a few optimizations, additional docstrings, and better error messages went into 2.0; to list them all would be impossible, but they're certainly significant. Consult the publicly available CVS logs if you want to see the full list. This progress is due to the five developers working for PythonLabs are now getting paid to spend their days fixing bugs, and also due to the improved communication resulting from moving to SourceForge.

À propos de Python 1.6.

Python 1.6 peut être vu comme la version des obligations contractuelles. Après que l’équipe de développement eût quitté le CNRI en mai 2000, celui-ci a demandé la création d’une version 1.6, contenant tout le travail sur Python réalisé au CNRI. Python 1.6 représente de ce fait l’état de l’arbre CVS tel qu’il était en mai 2000, la nouvelle fonctionnalité la plus remarquable étant le support d’Unicode. Le développement a continué après mai bien sûr, donc la branche 1.6 a reçu quelques corrections pour être sûr qu’elle soit compatible avec Python 2.0. La version 1.6 fait donc partie de l’évolution de Python, ce n’est pas une branche séparée.

Alors, devriez-vous vous intéresser à Python 1.6 ? Probablement pas. Les versions 1.6final et 2.0beta1 sont sorties le même jour (5 septembre 2000), le plan étant de finaliser Python 2.0 environ un mois plus tard. Si vous avez des applications à maintenir, il n’y a pas vraiment d’intérêt à casser des choses en migrant sur la version 1.6, les réparer, puis avoir de nouveau des choses cassées à peine un mois plus tard en passant à la 2.0; il vaut mieux partir directement de la 2.0. La plupart des fonctionnalités vraiment intéressantes décrites dans ce document sont seulement dans la 2.0, parce que beaucoup de travail a été réalisé entre mai et septembre.

Nouveau processus de développement

Le changement le plus important dans Python 2.0 ne concerne peut-être pas le code, mais le développement de Python : en mai 2000, les développeurs Python ont commencé à utiliser les outils mis à disposition par SourceForge pour stocker le code source, suivre les rapports de bogues et gérer la file d’attente des soumissions de correctifs. Pour signaler des bogues ou soumettre des correctifs pour Python 2.0, utilisez les outils de suivi des bogues et de gestion des correctifs disponibles sur la page du projet Python, à l’adresse https://sourceforge.net/projects/python/.

Le plus important des services maintenant hébergé chez SourceForge est l’arborescence CVS Python, le référentiel sous contrôle de version contenant le code source de Python. Auparavant, environ 7 personnes avaient un accès en écriture à l’arborescence CVS et tous les correctifs devaient être inspectés et archivés par l’une des personnes figurant sur cette liste restreinte. Évidemment, ce n’était pas très évolutif. En déplaçant l’arborescence CVS vers SourceForge, il est devenu possible d’accorder un accès en écriture à davantage de personnes ; en septembre 2000, 27 personnes pouvaient enregistrer les modifications, soit quatre fois plus. Cela rend possible des modifications à grande échelle qui ne seraient pas tentées si elles devaient être filtrées par le petit groupe de développeurs principaux. Par exemple, un jour, Peter Schneider-Kamp a eu l’idée de supprimer la compatibilité K&R C et de convertir le code source C de Python en ANSI C. Après avoir obtenu l’approbation de la liste de diffusion python-dev, il s’est lancé dans une série d’archives qui ont duré environ une semaine, d’autres développeurs l'ont rejoint et le travail a été fait. S’il n’y avait eut que 5 personnes ayant un accès en écriture, cette tâche aurait probablement été considérée comme « agréable, mais ne valant pas le temps ni les efforts nécessaires » et cela ne se serait jamais fait.

Le passage à l’utilisation des services de SourceForge a entraîné une augmentation remarquable du rythme de développement. Les correctifs sont maintenant soumis, commentés, révisés par des personnes autres que l’auteur d’origine et échangés entre les personnes jusqu’à ce que le correctif soit jugé utile. Les bogues sont suivis dans un emplacement central et peuvent être attribués à une personne spécifique pour être corrigés. , et nous pouvons compter le nombre de bogues ouverts pour mesurer les progrès. Cela n’a pas coûté cher: les développeurs ont désormais plus de courrier électronique à traiter, davantage de listes de diffusion à suivre et des outils spéciaux ont dû être créés pour le nouvel environnement. Par exemple, SourceForge envoie des messages électroniques de correctif et de notification de bogues par défaut qui ne sont d’aucune utilité, Ka-Ping Yee a donc créé un scraper HTML qui envoie des messages plus utiles.

La facilité d’ajout de code a provoqué quelques problèmes de croissance initiaux, tels que le code a été archivé avant qu’il ne soit prêt ou sans l’accord clair du groupe de développeurs. Le processus d’approbation qui a émergé est quelque peu similaire à celui utilisé par le groupe Apache. Les développeurs peuvent voter +1, +0, -0 ou -1 sur un patch; +1 et -1 indiquent une acceptation ou un rejet, tandis que +0 et -0 signifient que le développeur est généralement indifférent au changement, bien qu’il présente une légère inclinaison positive ou négative. Le changement le plus important par rapport au modèle Apache est que le vote est essentiellement consultatif, permettant à Guido van Rossum, détenteur du statut de « dictateur bienveillant à vie », de connaître l’opinion générale. Il peut toujours ignorer le résultat d’un vote et approuver ou rejeter un changement même si la communauté n’est pas d’accord avec lui.

Producing an actual patch is the last step in adding a new feature, and is usually easy compared to the earlier task of coming up with a good design. Discussions of new features can often explode into lengthy mailing list threads, making the discussion hard to follow, and no one can read every posting to python-dev. Therefore, a relatively formal process has been set up to write Python Enhancement Proposals (PEPs), modelled on the internet RFC process. PEPs are draft documents that describe a proposed new feature, and are continually revised until the community reaches a consensus, either accepting or rejecting the proposal. Quoting from the introduction to PEP 1, "PEP Purpose and Guidelines":

PEP signifie Python Enhancement Proposition. Une PEP est un document de conception fournissant des informations à la communauté Python ou décrivant une nouvelle fonctionnalité de Python. La PEP devrait fournir une spécification technique concise de la fonctionnalité et une justification de celle-ci.

Nous souhaitons que les PEP soient les principaux mécanismes permettant de proposer de nouvelles fonctionnalités, de recueillir les commentaires de la communauté sur un problème et de documenter les décisions de conception prises dans Python. L’auteur du PPE est chargé de créer un consensus au sein de la communauté et de documenter les opinions divergentes.

Read the rest of PEP 1 for the details of the PEP editorial process, style, and format. PEPs are kept in the Python CVS tree on SourceForge, though they're not part of the Python 2.0 distribution, and are also available in HTML form from https://peps.python.org/. As of September 2000, there are 25 PEPs, ranging from PEP 201, "Lockstep Iteration", to PEP 225, "Elementwise/Objectwise Operators".

Unicode

La plus grande nouveauté de Python 2.0 est un nouveau type de données fondamental: les chaînes Unicode. Unicode utilise des nombres à 16 bits pour représenter des caractères au lieu du nombre à 8 bits utilisé par ASCII, ce qui signifie que 65 536 caractères distincts peuvent être pris en charge.

La dernière interface de prise en charge Unicode a été mise au point après de nombreuses discussions souvent houleuses sur la liste de diffusion python-dev, et principalement implémentée par Marc-André Lemburg, basée sur une implémentation de type chaîne Unicode de Fredrik Lundh. Une explication détaillée de l’interface a été écrite ainsi PEP 100, "Intégration Python Unicode". Cet article couvrira simplement les points les plus significatifs sur les interfaces Unicode.

In Python source code, Unicode strings are written as u"string". Arbitrary Unicode characters can be written using a new escape sequence, \uHHHH, where HHHH is a 4-digit hexadecimal number from 0000 to FFFF. The existing \xHH escape sequence can also be used, and octal escapes can be used for characters up to U+01FF, which is represented by \777.

Les chaînes Unicode, tout comme les chaînes ordinaires, sont un type de séquence immuable. Ils peuvent être indexés et tranchés, mais pas modifiés en place. Les chaînes Unicode ont une méthode encoder([encoding]) qui renvoie une chaîne de 8 bits dans l’encodage souhaité. Les codages sont nommés par des chaînes, telles que ’ascii’, ’utf-8’, ’iso-8859-1’, ou autre chose. Une API de codec est définie pour l’implémentation et l’enregistrement de nouveaux codages disponibles dans tout un programme Python. Si aucun codage n’est spécifié, le codage par défaut est généralement du code ASCII 7-bits, bien qu’il puisse être modifié pour votre installation Python en appelant la fonction sys.setdefaultencoding (encoding) dans une version personnalisée de site.py.

La combinaison de chaînes 8 bits et Unicode est toujours forcée en Unicode, à l’aide du codage ASCII par défaut; le résultat de ’a’ + u’bc’ est u’abc’.

De nouvelles fonctions primitives ont été ajoutées, et des fonctions existantes ont été modifiées pour supporter Unicode :

  • unichr(ch) renvoie une chaîne Unicode de longueur 1, contenant le caractère ch.

  • ord(u), quand u est une chaîne normale ou Unicode de longueur 1, renvoie un entier représentant le nombre de caractères.

  • unicode(string [, encoding]  [, errors] ) crée une chaîne Unicode à partir d’une chaîne de 8 bits. encoding est une chaîne nommant le codage à utiliser. Le paramètre errors spécifie le traitement des caractères non valides pour l’ encodage en cours; en passant ’strict’ comme valeur, une exception est générée pour toute erreur de codage, alors que ’ignore’ fait en sorte que les erreurs soient ignorées en silence et que ’replace’ utilise U+FFFD, caractère de remplacement officiel, en cas de problème.

  • L’instruction exec et divers éléments intégrés tels que eval(), getattr() et setattr() accepteront également les chaînes Unicode ainsi que les chaînes ordinaires. (Il est possible que le processus de résolution de ce problème ait échappé à certaines fonctions intégrées ; si vous trouvez une fonction intégrée qui accepte les chaînes mais n’accepte pas les chaînes Unicode, signalez-la comme un bogue.)

Un nouveau module, unicodedata, fournit une interface aux propriétés de caractère Unicode. Par exemple, unicodedata.category(u'A') renvoie la chaîne de 2 caractères « Lu », le « L » désignant une lettre et « u » signifiant qu’il s’agit d’une majuscule. unicodedata.bidirectional(u'\u0660') renvoie « AN », ce qui signifie que U+0660 est un nombre arabe.

Le module codecs contient des fonctions pour rechercher les codages existants et en enregistrer de nouveaux. À moins que vous ne souhaitiez implémenter un nouvel encodage, vous utiliserez le plus souvent la fonction codecs.lookup(encoding), qui renvoie un quadruplet : (encode_func, decode_func, stream_reader, stream_writer).

  • encode_func est une fonction qui prend une chaîne Unicode, et renvoie un n-uplet de longueur 2 (string, length). string est une chaîne de caractères à 8 bits contenant une partie (ou la totalité) de la chaîne Unicode convertie en codage donné, et length vous indique le nombre de caractères de la chaîne qui ont été convertis.

  • decode_func est l’opposé de encode_func, en prenant une chaîne de caractères à 8 bits et le retour d’une paire (ustring, longueur), composé de la chaîne Unicode résultante ustring et l’entier length indiquant combien de caractères de la chaîne de caractères à 8 bits ont été consommés.

  • stream_reader is a class that supports decoding input from a stream. stream_reader(file_obj) returns an object that supports the read(), readline(), and readlines() methods. These methods will all translate from the given encoding and return Unicode strings.

  • stream_writer, similarly, is a class that supports encoding output to a stream. stream_writer(file_obj) returns an object that supports the write() and writelines() methods. These methods expect Unicode strings, translating them to the given encoding on output.

Par exemple, le code suivant écrit une chaîne Unicode dans un fichier, en l’encodant en UTF-8 :

import codecs

unistr = u'\u0660\u2000ab ...'

(UTF8_encode, UTF8_decode,
 UTF8_streamreader, UTF8_streamwriter) = codecs.lookup('UTF-8')

output = UTF8_streamwriter( open( '/tmp/output', 'wb') )
output.write( unistr )
output.close()

Le code suivant lirait ensuite le texte UTF-8 du fichier :

input = UTF8_streamreader( open( '/tmp/output', 'rb') )
print repr(input.read())
input.close()

Des expressions rationnelles supportant l’Unicode sont disponibles dans le module re, qui a une implémentation sous-jacente appelée SRE écrite par Fredrik Lundh de Secret Labs AB.

Une option de ligne de commande -U a été ajoutée, ce qui fait que le compilateur Python interprète toutes les chaînes de caractères comme des chaînes de caractères Unicode. Ceci est destiné à être utilisé dans les tests et rendre votre code Python compatible avec les versions futures, car une version future de Python peut abandonner la prise en charge des chaînes de caractères 8-bits et fournir uniquement des chaînes de caractères Unicode.

Compréhensions de listes

Les listes sont un type de données crucial dans Python, et de nombreux programmes manipulent une liste à un moment donné. Deux opérations communes sur les listes sont de boucler sur elles, soit de choisir les éléments qui répondent à un certain critère, ou d’appliquer une certaine fonction à chaque élément. Par exemple, à partir d’une liste de chaînes de caractères, vous pouvez retirer toutes les chaînes contenant une sous-chaîne donnée, ou enlever les espaces de chaque ligne.

Les fonctions existantes map() et filter() peuvent être utilisées à cette fin, mais elles nécessitent une fonction en leurs arguments. C’est très bien s’il y a une fonction intégrée existante qui peut être passé directement, mais s’il n’y a pas, vous devez créer une petite fonction pour faire le travail requis, et les règles de portée de Python rendent le résultat laid si la petite fonction a besoin d’informations supplémentaires. Prenons le premier exemple du paragraphe précédent, en trouvant toutes les chaînes de la liste contenant une sous-chaîne donnée. Vous pouvez écrire ce qui suit pour le faire :

# Given the list L, make a list of all strings
# containing the substring S.
sublist = filter( lambda s, substring=S:
                     string.find(s, substring) != -1,
                  L)

En raison des règles de portée de Python, un argument par défaut est utilisé de sorte que la fonction anonyme créée par l’expression lambda sait quelle sous-chaîne est recherchée. Les listes en compréhension rendent ceci plus propre :

sublist = [ s for s in L if string.find(s, S) != -1 ]

Les compréhensions de liste sont de la forme suivante :

[ expression for expr in sequence1
             for expr2 in sequence2 ...
             for exprN in sequenceN
             if condition ]

Le forin clauses contiennent les séquences à itérer. Les séquences n’ont pas à être de la même longueur, parce qu’elles ne sont pas itérées en parallèle, mais de gauche à droite; cela est expliqué plus clairement dans les paragraphes suivants. Les éléments de la liste générée seront les valeurs successives de l’expression. La clause finale if clause est facultative ; si présent, l’expression n’est évaluée et ajoutée au résultat que si la condition est vraie.

Pour que la sémantique soit très claire, une compréhension de liste est équivalente au code Python suivant :

for expr1 in sequence1:
    for expr2 in sequence2:
    ...
        for exprN in sequenceN:
             if (condition):
                  # Append the value of
                  # the expression to the
                  # resulting list.

Cela signifie que lorsqu’il y a plusieurs forin clauses, la liste résultante sera égale au produit des longueurs de toutes les séquences. Si vous avez deux listes de longueur 3, la liste de sortie est de longueur 9 :

seq1 = 'abc'
seq2 = (1,2,3)
>>> [ (x,y) for x in seq1 for y in seq2]
[('a', 1), ('a', 2), ('a', 3), ('b', 1), ('b', 2), ('b', 3), ('c', 1),
('c', 2), ('c', 3)]

Afin de ne pas introduire une ambiguïté dans la grammaire de Python, expression doit être encadrée par des parenthèses si elle produit un n-uplet. La première compréhension de liste ci-dessous n'est pas valide syntaxiquement, tandis que la seconde l'est :

# Syntax error
[ x,y for x in seq1 for y in seq2]
# Correct
[ (x,y) for x in seq1 for y in seq2]

Le concept des liste en compréhension provient à l’origine du langage de programmation fonctionnelle Haskell (https://www.haskell.org). Greg Ewing a plaidé le plus efficacement pour les ajouter à Python et a écrit le patch de compréhension de liste initiale, qui a ensuite été discuté pendant un temps apparemment sans fin sur la liste de diffusion python-dev et maintenu à jour par Skip Montanaro.

Opérateurs d’affectation augmentées

Les opérateurs d’affectation soudées, une autre fonctionnalité demandée depuis longtemps, ont été ajoutés à Python 2.0. Les opérateurs d’affectations augmentées comprennent +=, -=, *= et ainsi de suite. Par exemple, l’instruction a += 2 incrémente la valeur de la variable a par 2, équivalente à l’opération a = a + 2 .

The full list of supported assignment operators is +=, -=, *=, /=, %=, **=, &=, |=, ^=, >>=, and <<=. Python classes can override the augmented assignment operators by defining methods named __iadd__(), __isub__(), etc. For example, the following Number class stores a number and supports using += to create a new instance with an incremented value.

class Number:
    def __init__(self, value):
        self.value = value
    def __iadd__(self, increment):
        return Number( self.value + increment)

n = Number(5)
n += 3
print n.value

The __iadd__() special method is called with the value of the increment, and should return a new instance with an appropriately modified value; this return value is bound as the new value of the variable on the left-hand side.

Augmented assignment operators were first introduced in the C programming language, and most C-derived languages, such as awk, C++, Java, Perl, and PHP also support them. The augmented assignment patch was implemented by Thomas Wouters.

Méthodes de chaînes de caractères

Until now string-manipulation functionality was in the string module, which was usually a front-end for the strop module written in C. The addition of Unicode posed a difficulty for the strop module, because the functions would all need to be rewritten in order to accept either 8-bit or Unicode strings. For functions such as string.replace(), which takes 3 string arguments, that means eight possible permutations, and correspondingly complicated code.

Instead, Python 2.0 pushes the problem onto the string type, making string manipulation functionality available through methods on both 8-bit strings and Unicode strings.

>>> 'andrew'.capitalize()
'Andrew'
>>> 'hostname'.replace('os', 'linux')
'hlinuxtname'
>>> 'moshe'.find('sh')
2

One thing that hasn't changed, a noteworthy April Fools' joke notwithstanding, is that Python strings are immutable. Thus, the string methods return new strings, and do not modify the string on which they operate.

The old string module is still around for backwards compatibility, but it mostly acts as a front-end to the new string methods.

Two methods which have no parallel in pre-2.0 versions, although they did exist in JPython for quite some time, are startswith() and endswith(). s.startswith(t) is equivalent to s[:len(t)] == t, while s.endswith(t) is equivalent to s[-len(t):] == t.

One other method which deserves special mention is join(). The join() method of a string receives one parameter, a sequence of strings, and is equivalent to the string.join() function from the old string module, with the arguments reversed. In other words, s.join(seq) is equivalent to the old string.join(seq, s).

Garbage Collection of Cycles

The C implementation of Python uses reference counting to implement garbage collection. Every Python object maintains a count of the number of references pointing to itself, and adjusts the count as references are created or destroyed. Once the reference count reaches zero, the object is no longer accessible, since you need to have a reference to an object to access it, and if the count is zero, no references exist any longer.

Reference counting has some pleasant properties: it's easy to understand and implement, and the resulting implementation is portable, fairly fast, and reacts well with other libraries that implement their own memory handling schemes. The major problem with reference counting is that it sometimes doesn't realise that objects are no longer accessible, resulting in a memory leak. This happens when there are cycles of references.

Consider the simplest possible cycle, a class instance which has a reference to itself:

instance = SomeClass()
instance.myself = instance

After the above two lines of code have been executed, the reference count of instance is 2; one reference is from the variable named 'instance', and the other is from the myself attribute of the instance.

If the next line of code is del instance, what happens? The reference count of instance is decreased by 1, so it has a reference count of 1; the reference in the myself attribute still exists. Yet the instance is no longer accessible through Python code, and it could be deleted. Several objects can participate in a cycle if they have references to each other, causing all of the objects to be leaked.

Python 2.0 fixes this problem by periodically executing a cycle detection algorithm which looks for inaccessible cycles and deletes the objects involved. A new gc module provides functions to perform a garbage collection, obtain debugging statistics, and tuning the collector's parameters.

Running the cycle detection algorithm takes some time, and therefore will result in some additional overhead. It is hoped that after we've gotten experience with the cycle collection from using 2.0, Python 2.1 will be able to minimize the overhead with careful tuning. It's not yet obvious how much performance is lost, because benchmarking this is tricky and depends crucially on how often the program creates and destroys objects. The detection of cycles can be disabled when Python is compiled, if you can't afford even a tiny speed penalty or suspect that the cycle collection is buggy, by specifying the --without-cycle-gc switch when running the configure script.

Several people tackled this problem and contributed to a solution. An early implementation of the cycle detection approach was written by Toby Kelsey. The current algorithm was suggested by Eric Tiedemann during a visit to CNRI, and Guido van Rossum and Neil Schemenauer wrote two different implementations, which were later integrated by Neil. Lots of other people offered suggestions along the way; the March 2000 archives of the python-dev mailing list contain most of the relevant discussion, especially in the threads titled "Reference cycle collection for Python" and "Finalization again".

Other Core Changes

Various minor changes have been made to Python's syntax and built-in functions. None of the changes are very far-reaching, but they're handy conveniences.

Changements mineurs du langage

A new syntax makes it more convenient to call a given function with a tuple of arguments and/or a dictionary of keyword arguments. In Python 1.5 and earlier, you'd use the apply() built-in function: apply(f, args, kw) calls the function f() with the argument tuple args and the keyword arguments in the dictionary kw. apply() is the same in 2.0, but thanks to a patch from Greg Ewing, f(*args, **kw) is a shorter and clearer way to achieve the same effect. This syntax is symmetrical with the syntax for defining functions:

def f(*args, **kw):
    # args is a tuple of positional args,
    # kw is a dictionary of keyword args
    ...

The print statement can now have its output directed to a file-like object by following the print with >> file, similar to the redirection operator in Unix shells. Previously you'd either have to use the write() method of the file-like object, which lacks the convenience and simplicity of print, or you could assign a new value to sys.stdout and then restore the old value. For sending output to standard error, it's much easier to write this:

print >> sys.stderr, "Warning: action field not supplied"

Modules can now be renamed on importing them, using the syntax import module as name or from module import name as othername. The patch was submitted by Thomas Wouters.

A new format style is available when using the % operator; '%r' will insert the repr() of its argument. This was also added from symmetry considerations, this time for symmetry with the existing '%s' format style, which inserts the str() of its argument. For example, '%r %s' % ('abc', 'abc') returns a string containing 'abc' abc.

Previously there was no way to implement a class that overrode Python's built-in in operator and implemented a custom version. obj in seq returns true if obj is present in the sequence seq; Python computes this by simply trying every index of the sequence until either obj is found or an IndexError is encountered. Moshe Zadka contributed a patch which adds a __contains__() magic method for providing a custom implementation for in. Additionally, new built-in objects written in C can define what in means for them via a new slot in the sequence protocol.

Earlier versions of Python used a recursive algorithm for deleting objects. Deeply nested data structures could cause the interpreter to fill up the C stack and crash; Christian Tismer rewrote the deletion logic to fix this problem. On a related note, comparing recursive objects recursed infinitely and crashed; Jeremy Hylton rewrote the code to no longer crash, producing a useful result instead. For example, after this code:

a = []
b = []
a.append(a)
b.append(b)

The comparison a==b returns true, because the two recursive data structures are isomorphic. See the thread "trashcan and PR#7" in the April 2000 archives of the python-dev mailing list for the discussion leading up to this implementation, and some useful relevant links. Note that comparisons can now also raise exceptions. In earlier versions of Python, a comparison operation such as cmp(a,b) would always produce an answer, even if a user-defined __cmp__() method encountered an error, since the resulting exception would simply be silently swallowed.

Work has been done on porting Python to 64-bit Windows on the Itanium processor, mostly by Trent Mick of ActiveState. (Confusingly, sys.platform is still 'win32' on Win64 because it seems that for ease of porting, MS Visual C++ treats code as 32 bit on Itanium.) PythonWin also supports Windows CE; see the Python CE page at https://pythonce.sourceforge.net/ for more information.

Another new platform is Darwin/MacOS X; initial support for it is in Python 2.0. Dynamic loading works, if you specify "configure --with-dyld --with-suffix=.x". Consult the README in the Python source distribution for more instructions.

An attempt has been made to alleviate one of Python's warts, the often-confusing NameError exception when code refers to a local variable before the variable has been assigned a value. For example, the following code raises an exception on the print statement in both 1.5.2 and 2.0; in 1.5.2 a NameError exception is raised, while 2.0 raises a new UnboundLocalError exception. UnboundLocalError is a subclass of NameError, so any existing code that expects NameError to be raised should still work.

def f():
    print "i=",i
    i = i + 1
f()

Two new exceptions, TabError and IndentationError, have been introduced. They're both subclasses of SyntaxError, and are raised when Python code is found to be improperly indented.

Changements concernant les fonctions primitives

A new built-in, zip(seq1, seq2, ...), has been added. zip() returns a list of tuples where each tuple contains the i-th element from each of the argument sequences. The difference between zip() and map(None, seq1, seq2) is that map() pads the sequences with None if the sequences aren't all of the same length, while zip() truncates the returned list to the length of the shortest argument sequence.

The int() and long() functions now accept an optional "base" parameter when the first argument is a string. int('123', 10) returns 123, while int('123', 16) returns 291. int(123, 16) raises a TypeError exception with the message "can't convert non-string with explicit base".

A new variable holding more detailed version information has been added to the sys module. sys.version_info is a tuple (major, minor, micro, level, serial) For example, in a hypothetical 2.0.1beta1, sys.version_info would be (2, 0, 1, 'beta', 1). level is a string such as "alpha", "beta", or "final" for a final release.

Dictionaries have an odd new method, setdefault(key, default), which behaves similarly to the existing get() method. However, if the key is missing, setdefault() both returns the value of default as get() would do, and also inserts it into the dictionary as the value for key. Thus, the following lines of code:

if dict.has_key( key ): return dict[key]
else:
    dict[key] = []
    return dict[key]

can be reduced to a single return dict.setdefault(key, []) statement.

The interpreter sets a maximum recursion depth in order to catch runaway recursion before filling the C stack and causing a core dump or GPF.. Previously this limit was fixed when you compiled Python, but in 2.0 the maximum recursion depth can be read and modified using sys.getrecursionlimit() and sys.setrecursionlimit(). The default value is 1000, and a rough maximum value for a given platform can be found by running a new script, Misc/find_recursionlimit.py.

Porting to 2.0

New Python releases try hard to be compatible with previous releases, and the record has been pretty good. However, some changes are considered useful enough, usually because they fix initial design decisions that turned out to be actively mistaken, that breaking backward compatibility can't always be avoided. This section lists the changes in Python 2.0 that may cause old Python code to break.

The change which will probably break the most code is tightening up the arguments accepted by some methods. Some methods would take multiple arguments and treat them as a tuple, particularly various list methods such as append() and insert(). In earlier versions of Python, if L is a list, L.append( 1,2 ) appends the tuple (1,2) to the list. In Python 2.0 this causes a TypeError exception to be raised, with the message: 'append requires exactly 1 argument; 2 given'. The fix is to simply add an extra set of parentheses to pass both values as a tuple: L.append( (1,2) ).

The earlier versions of these methods were more forgiving because they used an old function in Python's C interface to parse their arguments; 2.0 modernizes them to use PyArg_ParseTuple(), the current argument parsing function, which provides more helpful error messages and treats multi-argument calls as errors. If you absolutely must use 2.0 but can't fix your code, you can edit Objects/listobject.c and define the preprocessor symbol NO_STRICT_LIST_APPEND to preserve the old behaviour; this isn't recommended.

Some of the functions in the socket module are still forgiving in this way. For example, socket.connect( ('hostname', 25) ) is the correct form, passing a tuple representing an IP address, but socket.connect('hostname', 25) also works. socket.connect_ex and socket.bind are similarly easy-going. 2.0alpha1 tightened these functions up, but because the documentation actually used the erroneous multiple argument form, many people wrote code which would break with the stricter checking. GvR backed out the changes in the face of public reaction, so for the socket module, the documentation was fixed and the multiple argument form is simply marked as deprecated; it will be tightened up again in a future Python version.

The \x escape in string literals now takes exactly 2 hex digits. Previously it would consume all the hex digits following the 'x' and take the lowest 8 bits of the result, so \x123456 was equivalent to \x56.

The AttributeError and NameError exceptions have a more friendly error message, whose text will be something like 'Spam' instance has no attribute 'eggs' or name 'eggs' is not defined. Previously the error message was just the missing attribute name eggs, and code written to take advantage of this fact will break in 2.0.

Some work has been done to make integers and long integers a bit more interchangeable. In 1.5.2, large-file support was added for Solaris, to allow reading files larger than 2 GiB; this made the tell() method of file objects return a long integer instead of a regular integer. Some code would subtract two file offsets and attempt to use the result to multiply a sequence or slice a string, but this raised a TypeError. In 2.0, long integers can be used to multiply or slice a sequence, and it'll behave as you'd intuitively expect it to; 3L * 'abc' produces 'abcabcabc', and (0,1,2,3)[2L:4L] produces (2,3). Long integers can also be used in various contexts where previously only integers were accepted, such as in the seek() method of file objects, and in the formats supported by the % operator (%d, %i, %x, etc.). For example, "%d" % 2L**64 will produce the string 18446744073709551616.

The subtlest long integer change of all is that the str() of a long integer no longer has a trailing 'L' character, though repr() still includes it. The 'L' annoyed many people who wanted to print long integers that looked just like regular integers, since they had to go out of their way to chop off the character. This is no longer a problem in 2.0, but code which does str(longval)[:-1] and assumes the 'L' is there, will now lose the final digit.

Taking the repr() of a float now uses a different formatting precision than str(). repr() uses %.17g format string for C's sprintf(), while str() uses %.12g as before. The effect is that repr() may occasionally show more decimal places than str(), for certain numbers. For example, the number 8.1 can't be represented exactly in binary, so repr(8.1) is '8.0999999999999996', while str(8.1) is '8.1'.

The -X command-line option, which turned all standard exceptions into strings instead of classes, has been removed; the standard exceptions will now always be classes. The exceptions module containing the standard exceptions was translated from Python to a built-in C module, written by Barry Warsaw and Fredrik Lundh.

Extending/Embedding Changes

Some of the changes are under the covers, and will only be apparent to people writing C extension modules or embedding a Python interpreter in a larger application. If you aren't dealing with Python's C API, you can safely skip this section.

The version number of the Python C API was incremented, so C extensions compiled for 1.5.2 must be recompiled in order to work with 2.0. On Windows, it's not possible for Python 2.0 to import a third party extension built for Python 1.5.x due to how Windows DLLs work, so Python will raise an exception and the import will fail.

Users of Jim Fulton's ExtensionClass module will be pleased to find out that hooks have been added so that ExtensionClasses are now supported by isinstance() and issubclass(). This means you no longer have to remember to write code such as if type(obj) == myExtensionClass, but can use the more natural if isinstance(obj, myExtensionClass).

The Python/importdl.c file, which was a mass of #ifdefs to support dynamic loading on many different platforms, was cleaned up and reorganised by Greg Stein. importdl.c is now quite small, and platform-specific code has been moved into a bunch of Python/dynload_*.c files. Another cleanup: there were also a number of my*.h files in the Include/ directory that held various portability hacks; they've been merged into a single file, Include/pyport.h.

Vladimir Marangozov's long-awaited malloc restructuring was completed, to make it easy to have the Python interpreter use a custom allocator instead of C's standard malloc(). For documentation, read the comments in Include/pymem.h and Include/objimpl.h. For the lengthy discussions during which the interface was hammered out, see the web archives of the 'patches' and 'python-dev' lists at python.org.

Recent versions of the GUSI development environment for MacOS support POSIX threads. Therefore, Python's POSIX threading support now works on the Macintosh. Threading support using the user-space GNU pth library was also contributed.

Threading support on Windows was enhanced, too. Windows supports thread locks that use kernel objects only in case of contention; in the common case when there's no contention, they use simpler functions which are an order of magnitude faster. A threaded version of Python 1.5.2 on NT is twice as slow as an unthreaded version; with the 2.0 changes, the difference is only 10%. These improvements were contributed by Yakov Markovitch.

Python 2.0's source now uses only ANSI C prototypes, so compiling Python now requires an ANSI C compiler, and can no longer be done using a compiler that only supports K&R C.

Previously the Python virtual machine used 16-bit numbers in its bytecode, limiting the size of source files. In particular, this affected the maximum size of literal lists and dictionaries in Python source; occasionally people who are generating Python code would run into this limit. A patch by Charles G. Waldman raises the limit from 2**16 to 2**32.

Three new convenience functions intended for adding constants to a module's dictionary at module initialization time were added: PyModule_AddObject(), PyModule_AddIntConstant(), and PyModule_AddStringConstant(). Each of these functions takes a module object, a null-terminated C string containing the name to be added, and a third argument for the value to be assigned to the name. This third argument is, respectively, a Python object, a C long, or a C string.

A wrapper API was added for Unix-style signal handlers. PyOS_getsig() gets a signal handler and PyOS_setsig() will set a new handler.

Distutils: Making Modules Easy to Install

Before Python 2.0, installing modules was a tedious affair -- there was no way to figure out automatically where Python is installed, or what compiler options to use for extension modules. Software authors had to go through an arduous ritual of editing Makefiles and configuration files, which only really work on Unix and leave Windows and MacOS unsupported. Python users faced wildly differing installation instructions which varied between different extension packages, which made administering a Python installation something of a chore.

The SIG for distribution utilities, shepherded by Greg Ward, has created the Distutils, a system to make package installation much easier. They form the distutils package, a new part of Python's standard library. In the best case, installing a Python module from source will require the same steps: first you simply mean unpack the tarball or zip archive, and the run "python setup.py install". The platform will be automatically detected, the compiler will be recognized, C extension modules will be compiled, and the distribution installed into the proper directory. Optional command-line arguments provide more control over the installation process, the distutils package offers many places to override defaults -- separating the build from the install, building or installing in non-default directories, and more.

In order to use the Distutils, you need to write a setup.py script. For the simple case, when the software contains only .py files, a minimal setup.py can be just a few lines long:

from distutils.core import setup
setup (name = "foo", version = "1.0",
       py_modules = ["module1", "module2"])

The setup.py file isn't much more complicated if the software consists of a few packages:

from distutils.core import setup
setup (name = "foo", version = "1.0",
       packages = ["package", "package.subpackage"])

A C extension can be the most complicated case; here's an example taken from the PyXML package:

from distutils.core import setup, Extension

expat_extension = Extension('xml.parsers.pyexpat',
     define_macros = [('XML_NS', None)],
     include_dirs = [ 'extensions/expat/xmltok',
                      'extensions/expat/xmlparse' ],
     sources = [ 'extensions/pyexpat.c',
                 'extensions/expat/xmltok/xmltok.c',
                 'extensions/expat/xmltok/xmlrole.c', ]
       )
setup (name = "PyXML", version = "0.5.4",
       ext_modules =[ expat_extension ] )

The Distutils can also take care of creating source and binary distributions. The "sdist" command, run by "python setup.py sdist', builds a source distribution such as foo-1.0.tar.gz. Adding new commands isn't difficult, "bdist_rpm" and "bdist_wininst" commands have already been contributed to create an RPM distribution and a Windows installer for the software, respectively. Commands to create other distribution formats such as Debian packages and Solaris .pkg files are in various stages of development.

All this is documented in a new manual, Distributing Python Modules, that joins the basic set of Python documentation.

Modules XML

Python 1.5.2 included a simple XML parser in the form of the xmllib module, contributed by Sjoerd Mullender. Since 1.5.2's release, two different interfaces for processing XML have become common: SAX2 (version 2 of the Simple API for XML) provides an event-driven interface with some similarities to xmllib, and the DOM (Document Object Model) provides a tree-based interface, transforming an XML document into a tree of nodes that can be traversed and modified. Python 2.0 includes a SAX2 interface and a stripped-down DOM interface as part of the xml package. Here we will give a brief overview of these new interfaces; consult the Python documentation or the source code for complete details. The Python XML SIG is also working on improved documentation.

Support de SAX2

SAX defines an event-driven interface for parsing XML. To use SAX, you must write a SAX handler class. Handler classes inherit from various classes provided by SAX, and override various methods that will then be called by the XML parser. For example, the startElement() and endElement() methods are called for every starting and end tag encountered by the parser, the characters() method is called for every chunk of character data, and so forth.

The advantage of the event-driven approach is that the whole document doesn't have to be resident in memory at any one time, which matters if you are processing really huge documents. However, writing the SAX handler class can get very complicated if you're trying to modify the document structure in some elaborate way.

For example, this little example program defines a handler that prints a message for every starting and ending tag, and then parses the file hamlet.xml using it:

from xml import sax

class SimpleHandler(sax.ContentHandler):
    def startElement(self, name, attrs):
        print 'Start of element:', name, attrs.keys()

    def endElement(self, name):
        print 'End of element:', name

# Create a parser object
parser = sax.make_parser()

# Tell it what handler to use
handler = SimpleHandler()
parser.setContentHandler( handler )

# Parse a file!
parser.parse( 'hamlet.xml' )

For more information, consult the Python documentation, or the XML HOWTO at https://pyxml.sourceforge.net/topics/howto/xml-howto.html.

Support du DOM

The Document Object Model is a tree-based representation for an XML document. A top-level Document instance is the root of the tree, and has a single child which is the top-level Element instance. This Element has children nodes representing character data and any sub-elements, which may have further children of their own, and so forth. Using the DOM you can traverse the resulting tree any way you like, access element and attribute values, insert and delete nodes, and convert the tree back into XML.

The DOM is useful for modifying XML documents, because you can create a DOM tree, modify it by adding new nodes or rearranging subtrees, and then produce a new XML document as output. You can also construct a DOM tree manually and convert it to XML, which can be a more flexible way of producing XML output than simply writing <tag1>...</tag1> to a file.

The DOM implementation included with Python lives in the xml.dom.minidom module. It's a lightweight implementation of the Level 1 DOM with support for XML namespaces. The parse() and parseString() convenience functions are provided for generating a DOM tree:

from xml.dom import minidom
doc = minidom.parse('hamlet.xml')

doc is a Document instance. Document, like all the other DOM classes such as Element and Text, is a subclass of the Node base class. All the nodes in a DOM tree therefore support certain common methods, such as toxml() which returns a string containing the XML representation of the node and its children. Each class also has special methods of its own; for example, Element and Document instances have a method to find all child elements with a given tag name. Continuing from the previous 2-line example:

perslist = doc.getElementsByTagName( 'PERSONA' )
print perslist[0].toxml()
print perslist[1].toxml()

For the Hamlet XML file, the above few lines output:

<PERSONA>CLAUDIUS, king of Denmark. </PERSONA>
<PERSONA>HAMLET, son to the late, and nephew to the present king.</PERSONA>

The root element of the document is available as doc.documentElement, and its children can be easily modified by deleting, adding, or removing nodes:

root = doc.documentElement

# Remove the first child
root.removeChild( root.childNodes[0] )

# Move the new first child to the end
root.appendChild( root.childNodes[0] )

# Insert the new first child (originally,
# the third child) before the 20th child.
root.insertBefore( root.childNodes[0], root.childNodes[20] )

Again, I will refer you to the Python documentation for a complete listing of the different Node classes and their various methods.

Relationship to PyXML

The XML Special Interest Group has been working on XML-related Python code for a while. Its code distribution, called PyXML, is available from the SIG's web pages at https://www.python.org/community/sigs/current/xml-sig. The PyXML distribution also used the package name xml. If you've written programs that used PyXML, you're probably wondering about its compatibility with the 2.0 xml package.

The answer is that Python 2.0's xml package isn't compatible with PyXML, but can be made compatible by installing a recent version PyXML. Many applications can get by with the XML support that is included with Python 2.0, but more complicated applications will require that the full PyXML package will be installed. When installed, PyXML versions 0.6.0 or greater will replace the xml package shipped with Python, and will be a strict superset of the standard package, adding a bunch of additional features. Some of the additional features in PyXML include:

  • 4DOM, a full DOM implementation from FourThought, Inc.

  • The xmlproc validating parser, written by Lars Marius Garshol.

  • The sgmlop parser accelerator module, written by Fredrik Lundh.

Module changes

Lots of improvements and bugfixes were made to Python's extensive standard library; some of the affected modules include readline, ConfigParser, cgi, calendar, posix, readline, xmllib, aifc, chunk, wave, random, shelve, and nntplib. Consult the CVS logs for the exact patch-by-patch details.

Brian Gallew contributed OpenSSL support for the socket module. OpenSSL is an implementation of the Secure Socket Layer, which encrypts the data being sent over a socket. When compiling Python, you can edit Modules/Setup to include SSL support, which adds an additional function to the socket module: socket.ssl(socket, keyfile, certfile), which takes a socket object and returns an SSL socket. The httplib and urllib modules were also changed to support https:// URLs, though no one has implemented FTP or SMTP over SSL.

The httplib module has been rewritten by Greg Stein to support HTTP/1.1.

Backward compatibility with the 1.5 version of httplib is provided, though using HTTP/1.1 features such as pipelining will require rewriting code to use a different set of interfaces.

The Tkinter module now supports Tcl/Tk version 8.1, 8.2, or 8.3, and support for the older 7.x versions has been dropped. The Tkinter module now supports displaying Unicode strings in Tk widgets. Also, Fredrik Lundh contributed an optimization which makes operations like create_line and create_polygon much faster, especially when using lots of coordinates.

The curses module has been greatly extended, starting from Oliver Andrich's enhanced version, to provide many additional functions from ncurses and SYSV curses, such as colour, alternative character set support, pads, and mouse support. This means the module is no longer compatible with operating systems that only have BSD curses, but there don't seem to be any currently maintained OSes that fall into this category.

As mentioned in the earlier discussion of 2.0's Unicode support, the underlying implementation of the regular expressions provided by the re module has been changed. SRE, a new regular expression engine written by Fredrik Lundh and partially funded by Hewlett Packard, supports matching against both 8-bit strings and Unicode strings.

Nouveaux modules

A number of new modules were added. We'll simply list them with brief descriptions; consult the 2.0 documentation for the details of a particular module.

  • atexit: For registering functions to be called before the Python interpreter exits. Code that currently sets sys.exitfunc directly should be changed to use the atexit module instead, importing atexit and calling atexit.register() with the function to be called on exit. (Contributed by Skip Montanaro.)

  • codecs, encodings, unicodedata: Added as part of the new Unicode support.

  • filecmp: Supersedes the old cmp, cmpcache and dircmp modules, which have now become deprecated. (Contributed by Gordon MacMillan and Moshe Zadka.)

  • gettext: This module provides internationalization (I18N) and localization (L10N) support for Python programs by providing an interface to the GNU gettext message catalog library. (Integrated by Barry Warsaw, from separate contributions by Martin von Löwis, Peter Funk, and James Henstridge.)

  • linuxaudiodev: Support for the /dev/audio device on Linux, a twin to the existing sunaudiodev module. (Contributed by Peter Bosch, with fixes by Jeremy Hylton.)

  • mmap: An interface to memory-mapped files on both Windows and Unix. A file's contents can be mapped directly into memory, at which point it behaves like a mutable string, so its contents can be read and modified. They can even be passed to functions that expect ordinary strings, such as the re module. (Contributed by Sam Rushing, with some extensions by A.M. Kuchling.)

  • pyexpat: An interface to the Expat XML parser. (Contributed by Paul Prescod.)

  • robotparser: Parse a robots.txt file, which is used for writing web spiders that politely avoid certain areas of a web site. The parser accepts the contents of a robots.txt file, builds a set of rules from it, and can then answer questions about the fetchability of a given URL. (Contributed by Skip Montanaro.)

  • tabnanny: A module/script to check Python source code for ambiguous indentation. (Contributed by Tim Peters.)

  • UserString: A base class useful for deriving objects that behave like strings.

  • webbrowser: A module that provides a platform independent way to launch a web browser on a specific URL. For each platform, various browsers are tried in a specific order. The user can alter which browser is launched by setting the BROWSER environment variable. (Originally inspired by Eric S. Raymond's patch to urllib which added similar functionality, but the final module comes from code originally implemented by Fred Drake as Tools/idle/BrowserControl.py, and adapted for the standard library by Fred.)

  • _winreg: An interface to the Windows registry. _winreg is an adaptation of functions that have been part of PythonWin since 1995, but has now been added to the core distribution, and enhanced to support Unicode. _winreg was written by Bill Tutt and Mark Hammond.

  • zipfile: A module for reading and writing ZIP-format archives. These are archives produced by PKZIP on DOS/Windows or zip on Unix, not to be confused with gzip-format files (which are supported by the gzip module) (Contributed by James C. Ahlstrom.)

  • imputil: A module that provides a simpler way for writing customized import hooks, in comparison to the existing ihooks module. (Implemented by Greg Stein, with much discussion on python-dev along the way.)

IDLE Improvements

IDLE is the official Python cross-platform IDE, written using Tkinter. Python 2.0 includes IDLE 0.6, which adds a number of new features and improvements. A partial list:

  • UI improvements and optimizations, especially in the area of syntax highlighting and auto-indentation.

  • The class browser now shows more information, such as the top level functions in a module.

  • Tab width is now a user settable option. When opening an existing Python file, IDLE automatically detects the indentation conventions, and adapts.

  • There is now support for calling browsers on various platforms, used to open the Python documentation in a browser.

  • IDLE now has a command line, which is largely similar to the vanilla Python interpreter.

  • Call tips were added in many places.

  • IDLE can now be installed as a package.

  • In the editor window, there is now a line/column bar at the bottom.

  • Three new keystroke commands: Check module (Alt-F5), Import module (F5) and Run script (Ctrl-F5).

Deleted and Deprecated Modules

A few modules have been dropped because they're obsolete, or because there are now better ways to do the same thing. The stdwin module is gone; it was for a platform-independent windowing toolkit that's no longer developed.

A number of modules have been moved to the lib-old subdirectory: cmp, cmpcache, dircmp, dump, find, grep, packmail, poly, util, whatsound, zmod. If you have code which relies on a module that's been moved to lib-old, you can simply add that directory to sys.path to get them back, but you're encouraged to update any code that uses these modules.

Remerciements

The authors would like to thank the following people for offering suggestions on various drafts of this article: David Bolen, Mark Hammond, Gregg Hauser, Jeremy Hylton, Fredrik Lundh, Detlef Lannert, Aahz Maruch, Skip Montanaro, Vladimir Marangozov, Tobias Polzin, Guido van Rossum, Neil Schemenauer, and Russ Schmidt.