引入模組

PyObject *PyImport_ImportModule(const char *name)

回傳值：新的參照。 為 穩定 ABI 的一部分.

This is a wrapper around PyImport_Import() which takes a const char* as an argument instead of a PyObject*.

PyObject *PyImport_ImportModuleNoBlock(const char *name)

回傳值：新的參照。 為 穩定 ABI 的一部分.

This function is a deprecated alias of PyImport_ImportModule().

在 3.3 版的變更: This function used to fail immediately when the import lock was held by another thread. In Python 3.3 though, the locking scheme switched to per-module locks for most purposes, so this function's special behaviour isn't needed anymore.

Deprecated since version 3.13, will be removed in version 3.15: 請改用 PyImport_ImportModule()。

PyObject *PyImport_ImportModuleEx(const char *name, PyObject *globals, PyObject *locals, PyObject *fromlist)

回傳值：新的參照。

Import a module. This is best described by referring to the built-in Python function __import__().

The return value is a new reference to the imported module or top-level package, or NULL with an exception set on failure. Like for __import__(), the return value when a submodule of a package was requested is normally the top-level package, unless a non-empty fromlist was given.

Failing imports remove incomplete module objects, like with PyImport_ImportModule().

PyObject *PyImport_ImportModuleLevelObject(PyObject *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.7 版本開始.

Import a module. This is best described by referring to the built-in Python function __import__(), as the standard __import__() function calls this function directly.

The return value is a new reference to the imported module or top-level package, or NULL with an exception set on failure. Like for __import__(), the return value when a submodule of a package was requested is normally the top-level package, unless a non-empty fromlist was given.

在 3.3 版被加入.

PyObject *PyImport_ImportModuleLevel(const char *name, PyObject *globals, PyObject *locals, PyObject *fromlist, int level)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Similar to PyImport_ImportModuleLevelObject(), but the name is a UTF-8 encoded string instead of a Unicode object.

在 3.3 版的變更: Negative values for level are no longer accepted.

PyObject *PyImport_Import(PyObject *name)

回傳值：新的參照。 為 穩定 ABI 的一部分.

This is a higher-level interface that calls the current "import hook function" (with an explicit level of 0, meaning absolute import). It invokes the __import__() function from the __builtins__ of the current globals. This means that the import is done using whatever import hooks are installed in the current environment.

This function always uses absolute imports.

PyObject *PyImport_ReloadModule(PyObject *m)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Reload a module. Return a new reference to the reloaded module, or NULL with an exception set on failure (the module still exists in this case).

PyObject *PyImport_AddModuleRef(const char *name)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.13 版本開始.

Return the module object corresponding to a module name.

The name argument may be of the form package.module. First check the modules dictionary if there's one there, and if not, create a new one and insert it in the modules dictionary.

Return a strong reference to the module on success. Return NULL with an exception set on failure.

The module name name is decoded from UTF-8.

This function does not load or import the module; if the module wasn't already loaded, you will get an empty module object. Use PyImport_ImportModule() or one of its variants to import a module. Package structures implied by a dotted name for name are not created if not already present.

在 3.13 版被加入.

PyObject *PyImport_AddModuleObject(PyObject *name)

回傳值：借用參照。 為 穩定 ABI 的一部分 自 3.7 版本開始.

Similar to PyImport_AddModuleRef(), but return a borrowed reference and name is a Python str object.

在 3.3 版被加入.

PyObject *PyImport_AddModule(const char *name)

回傳值：借用參照。 為 穩定 ABI 的一部分.

Similar to PyImport_AddModuleRef(), but return a borrowed reference.

PyObject *PyImport_ExecCodeModule(const char *name, PyObject *co)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Given a module name (possibly of the form package.module) and a code object read from a Python bytecode file or obtained from the built-in function compile(), load the module. Return a new reference to the module object, or NULL with an exception set if an error occurred. name is removed from sys.modules in error cases, even if name was already in sys.modules on entry to PyImport_ExecCodeModule(). Leaving incompletely initialized modules in sys.modules is dangerous, as imports of such modules have no way to know that the module object is an unknown (and probably damaged with respect to the module author's intents) state.

The module's __spec__ and __loader__ will be set, if not set already, with the appropriate values. The spec's loader will be set to the module's __loader__ (if set) and to an instance of SourceFileLoader otherwise.

The module's __file__ attribute will be set to the code object's co_filename. If applicable, __cached__ will also be set.

This function will reload the module if it was already imported. See PyImport_ReloadModule() for the intended way to reload a module.

If name points to a dotted name of the form package.module, any package structures not already created will still not be created.

See also PyImport_ExecCodeModuleEx() and PyImport_ExecCodeModuleWithPathnames().

在 3.12 版的變更: The setting of __cached__ and __loader__ is deprecated. See ModuleSpec for alternatives.

PyObject *PyImport_ExecCodeModuleEx(const char *name, PyObject *co, const char *pathname)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Like PyImport_ExecCodeModule(), but the __file__ attribute of the module object is set to pathname if it is non-NULL.

也請見 PyImport_ExecCodeModuleWithPathnames()。

PyObject *PyImport_ExecCodeModuleObject(PyObject *name, PyObject *co, PyObject *pathname, PyObject *cpathname)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.7 版本開始.

Like PyImport_ExecCodeModuleEx(), but the __cached__ attribute of the module object is set to cpathname if it is non-NULL. Of the three functions, this is the preferred one to use.

在 3.3 版被加入.

在 3.12 版的變更: Setting __cached__ is deprecated. See ModuleSpec for alternatives.

PyObject *PyImport_ExecCodeModuleWithPathnames(const char *name, PyObject *co, const char *pathname, const char *cpathname)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Like PyImport_ExecCodeModuleObject(), but name, pathname and cpathname are UTF-8 encoded strings. Attempts are also made to figure out what the value for pathname should be from cpathname if the former is set to NULL.

在 3.2 版被加入.

在 3.3 版的變更: Uses imp.source_from_cache() in calculating the source path if only the bytecode path is provided.

在 3.12 版的變更: 不再使用已被移除的 imp 模組。

long PyImport_GetMagicNumber()

為 穩定 ABI 的一部分.

Return the magic number for Python bytecode files (a.k.a. .pyc file). The magic number should be present in the first four bytes of the bytecode file, in little-endian byte order. Returns -1 on error.

在 3.3 版的變更: 當失敗時回傳 -1。

const char *PyImport_GetMagicTag()

為 穩定 ABI 的一部分.

Return the magic tag string for PEP 3147 format Python bytecode file names. Keep in mind that the value at sys.implementation.cache_tag is authoritative and should be used instead of this function.

在 3.2 版被加入.

PyObject *PyImport_GetModuleDict()

回傳值：借用參照。 為 穩定 ABI 的一部分.

Return the dictionary used for the module administration (a.k.a. sys.modules). Note that this is a per-interpreter variable.

PyObject *PyImport_GetModule(PyObject *name)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.8 版本開始.

Return the already imported module with the given name. If the module has not been imported yet then returns NULL but does not set an error. Returns NULL and sets an error if the lookup failed.

在 3.7 版被加入.

PyObject *PyImport_GetImporter(PyObject *path)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return a finder object for a sys.path/pkg.__path__ item path, possibly by fetching it from the sys.path_importer_cache dict. If it wasn't yet cached, traverse sys.path_hooks until a hook is found that can handle the path item. Return None if no hook could; this tells our caller that the path based finder could not find a finder for this path item. Cache the result in sys.path_importer_cache. Return a new reference to the finder object.

int PyImport_ImportFrozenModuleObject(PyObject *name)

為 穩定 ABI 的一部分 自 3.7 版本開始.

Load a frozen module named name. Return 1 for success, 0 if the module is not found, and -1 with an exception set if the initialization failed. To access the imported module on a successful load, use PyImport_ImportModule(). (Note the misnomer --- this function would reload the module if it was already imported.)

在 3.3 版被加入.

在 3.4 版的變更: The __file__ attribute is no longer set on the module.

int PyImport_ImportFrozenModule(const char *name)

為 穩定 ABI 的一部分.

Similar to PyImport_ImportFrozenModuleObject(), but the name is a UTF-8 encoded string instead of a Unicode object.

struct _frozen

This is the structure type definition for frozen module descriptors, as generated by the freeze utility (see Tools/freeze/ in the Python source distribution). Its definition, found in Include/import.h, is:

struct _frozen {
    const char *name;
    const unsigned char *code;
    int size;
    bool is_package;
};

在 3.11 版的變更: The new is_package field indicates whether the module is a package or not. This replaces setting the size field to a negative value.

const struct _frozen *PyImport_FrozenModules

This pointer is initialized to point to an array of _frozen records, terminated by one whose members are all NULL or zero. When a frozen module is imported, it is searched in this table. Third-party code could play tricks with this to provide a dynamically created collection of frozen modules.

int PyImport_AppendInittab(const char *name, PyObject *(*initfunc)(void))

為 穩定 ABI 的一部分.

Add a single module to the existing table of built-in modules. This is a convenience wrapper around PyImport_ExtendInittab(), returning -1 if the table could not be extended. The new module can be imported by the name name, and uses the function initfunc as the initialization function called on the first attempted import. This should be called before Py_Initialize().

struct _inittab

Structure describing a single entry in the list of built-in modules. Programs which embed Python may use an array of these structures in conjunction with PyImport_ExtendInittab() to provide additional built-in modules. The structure consists of two members:

const char *name

The module name, as an ASCII encoded string.

PyObject *(*initfunc)(void)

Initialization function for a module built into the interpreter.

int PyImport_ExtendInittab(struct _inittab *newtab)

Add a collection of modules to the table of built-in modules. The newtab array must end with a sentinel entry which contains NULL for the name field; failure to provide the sentinel value can result in a memory fault. Returns 0 on success or -1 if insufficient memory could be allocated to extend the internal table. In the event of failure, no modules are added to the internal table. This must be called before Py_Initialize().

If Python is initialized multiple times, PyImport_AppendInittab() or PyImport_ExtendInittab() must be called before each Python initialization.