test --- Regression tests package for Python

備註

The test package is meant for internal use by Python only. It is documented for the benefit of the core developers of Python. Any use of this package outside of Python's standard library is discouraged as code mentioned here can change or be removed without notice between releases of Python.

The test package contains all regression tests for Python as well as the modules test.support and test.regrtest. test.support is used to enhance your tests while test.regrtest drives the testing suite.

Each module in the test package whose name starts with test_ is a testing suite for a specific module or feature. All new tests should be written using the unittest or doctest module. Some older tests are written using a "traditional" testing style that compares output printed to sys.stdout; this style of test is considered deprecated.

也參考

Module unittest

Writing PyUnit regression tests.

模組 doctest

Tests embedded in documentation strings.

Writing Unit Tests for the test package

It is preferred that tests that use the unittest module follow a few guidelines. One is to name the test module by starting it with test_ and end it with the name of the module being tested. The test methods in the test module should start with test_ and end with a description of what the method is testing. This is needed so that the methods are recognized by the test driver as test methods. Also, no documentation string for the method should be included. A comment (such as # Tests function returns only True or False) should be used to provide documentation for test methods. This is done because documentation strings get printed out if they exist and thus what test is being run is not stated.

A basic boilerplate is often used:

import unittest
from test import support

class MyTestCase1(unittest.TestCase):

    # Only use setUp() and tearDown() if necessary

    def setUp(self):
        ... code to execute in preparation for tests ...

    def tearDown(self):
        ... code to execute to clean up after tests ...

    def test_feature_one(self):
        # Test feature one.
        ... testing code ...

    def test_feature_two(self):
        # Test feature two.
        ... testing code ...

    ... more test methods ...

class MyTestCase2(unittest.TestCase):
    ... same structure as MyTestCase1 ...

... more test classes ...

if __name__ == '__main__':
    unittest.main()

This code pattern allows the testing suite to be run by test.regrtest, on its own as a script that supports the unittest CLI, or via the python -m unittest CLI.

The goal for regression testing is to try to break code. This leads to a few guidelines to be followed:

  • The testing suite should exercise all classes, functions, and constants. This includes not just the external API that is to be presented to the outside world but also "private" code.

  • Whitebox testing (examining the code being tested when the tests are being written) is preferred. Blackbox testing (testing only the published user interface) is not complete enough to make sure all boundary and edge cases are tested.

  • Make sure all possible values are tested including invalid ones. This makes sure that not only all valid values are acceptable but also that improper values are handled correctly.

  • Exhaust as many code paths as possible. Test where branching occurs and thus tailor input to make sure as many different paths through the code are taken.

  • Add an explicit test for any bugs discovered for the tested code. This will make sure that the error does not crop up again if the code is changed in the future.

  • Make sure to clean up after your tests (such as close and remove all temporary files).

  • If a test is dependent on a specific condition of the operating system then verify the condition already exists before attempting the test.

  • Import as few modules as possible and do it as soon as possible. This minimizes external dependencies of tests and also minimizes possible anomalous behavior from side-effects of importing a module.

  • Try to maximize code reuse. On occasion, tests will vary by something as small as what type of input is used. Minimize code duplication by subclassing a basic test class with a class that specifies the input:

    class TestFuncAcceptsSequencesMixin:

    func = mySuperWhammyFunction

    def test_func(self):
        self.func(self.arg)

class AcceptLists(TestFuncAcceptsSequencesMixin, unittest.TestCase):
    arg = [1, 2, 3]

class AcceptStrings(TestFuncAcceptsSequencesMixin, unittest.TestCase):
    arg = 'abc'

class AcceptTuples(TestFuncAcceptsSequencesMixin, unittest.TestCase):
    arg = (1, 2, 3)

    When using this pattern, remember that all classes that inherit from unittest.TestCase are run as tests. The Mixin class in the example above does not have any data and so can't be run by itself, thus it does not inherit from unittest.TestCase.

也參考

Test Driven Development

A book by Kent Beck on writing tests before code.

Running tests using the command-line interface

The test package can be run as a script to drive Python's regression test suite, thanks to the -m option: python -m test. Under the hood, it uses test.regrtest; the call python -m test.regrtest used in previous Python versions still works. Running the script by itself automatically starts running all regression tests in the test package. It does this by finding all modules in the package whose name starts with test_, importing them, and executing the function test_main() if present or loading the tests via unittest.TestLoader.loadTestsFromModule if test_main does not exist. The names of tests to execute may also be passed to the script. Specifying a single regression test (python -m test test_spam) will minimize output and only print whether the test passed or failed.

Running test directly allows what resources are available for tests to use to be set. You do this by using the -u command-line option. Specifying all as the value for the -u option enables all possible resources: python -m test -uall. If all but one resource is desired (a more common case), a comma-separated list of resources that are not desired may be listed after all. The command python -m test -uall,-audio,-largefile will run test with all resources except the audio and largefile resources. For a list of all resources and more command-line options, run python -m test -h.

Some other ways to execute the regression tests depend on what platform the tests are being executed on. On Unix, you can run make test at the top-level directory where Python was built. On Windows, executing rt.bat from your PCbuild directory will run all regression tests.

test.support --- Utilities for the Python test suite

The test.support module provides support for Python's regression test suite.

備註

test.support is not a public module. It is documented here to help Python developers write tests. The API of this module is subject to change without backwards compatibility concerns between releases.

This module defines the following exceptions:

exception test.support.TestFailed

Exception to be raised when a test fails. This is deprecated in favor of unittest-based tests and unittest.TestCase's assertion methods.

exception test.support.ResourceDenied

Subclass of unittest.SkipTest. Raised when a resource (such as a network connection) is not available. Raised by the requires() function.

The test.support module defines the following constants:

test.support.verbose

True when verbose output is enabled. Should be checked when more detailed information is desired about a running test. verbose is set by test.regrtest.

test.support.is_jython

True if the running interpreter is Jython.

test.support.is_android

True if the system is Android.

test.support.unix_shell

Path for shell if not on Windows; otherwise None.

test.support.FS_NONASCII

A non-ASCII character encodable by os.fsencode().

test.support.TESTFN

Set to a name that is safe to use as the name of a temporary file. Any temporary file that is created should be closed and unlinked (removed).

test.support.TESTFN_UNICODE

Set to a non-ASCII name for a temporary file.

test.support.TESTFN_ENCODING

Set to sys.getfilesystemencoding().

test.support.TESTFN_UNENCODABLE

Set to a filename (str type) that should not be able to be encoded by file system encoding in strict mode. It may be None if it's not possible to generate such a filename.

test.support.TESTFN_UNDECODABLE

Set to a filename (bytes type) that should not be able to be decoded by file system encoding in strict mode. It may be None if it's not possible to generate such a filename.

test.support.TESTFN_NONASCII

Set to a filename containing the FS_NONASCII character.

test.support.IPV6_ENABLED

Set to True if IPV6 is enabled on this host, False otherwise.

test.support.SAVEDCWD

Set to os.getcwd().

test.support.PGO

Set when tests can be skipped when they are not useful for PGO.

test.support.PIPE_MAX_SIZE

A constant that is likely larger than the underlying OS pipe buffer size, to make writes blocking.

test.support.SOCK_MAX_SIZE

A constant that is likely larger than the underlying OS socket buffer size, to make writes blocking.

test.support.TEST_SUPPORT_DIR

Set to the top level directory that contains test.support.

test.support.TEST_HOME_DIR

Set to the top level directory for the test package.

test.support.TEST_DATA_DIR

Set to the data directory within the test package.

test.support.MAX_Py_ssize_t

Set to sys.maxsize for big memory tests.

test.support.max_memuse

Set by set_memlimit() as the memory limit for big memory tests. Limited by MAX_Py_ssize_t.

test.support.real_max_memuse

Set by set_memlimit() as the memory limit for big memory tests. Not limited by MAX_Py_ssize_t.

test.support.MISSING_C_DOCSTRINGS

Return True if running on CPython, not on Windows, and configuration not set with WITH_DOC_STRINGS.

test.support.HAVE_DOCSTRINGS

Check for presence of docstrings.

test.support.TEST_HTTP_URL

Define the URL of a dedicated HTTP server for the network tests.

test.support.ALWAYS_EQ

Object that is equal to anything. Used to test mixed type comparison.

test.support.LARGEST

Object that is greater than anything (except itself). Used to test mixed type comparison.

test.support.SMALLEST

Object that is less than anything (except itself). Used to test mixed type comparison.

The test.support module defines the following functions:

test.support.forget(module_name)

Remove the module named module_name from sys.modules and delete any byte-compiled files of the module.

test.support.unload(name)

Delete name from sys.modules.

Call os.unlink() on filename. On Windows platforms, this is wrapped with a wait loop that checks for the existence fo the file.

test.support.rmdir(filename)

Call os.rmdir() on filename. On Windows platforms, this is wrapped with a wait loop that checks for the existence of the file.

test.support.rmtree(path)

Call shutil.rmtree() on path or call os.lstat() and os.rmdir() to remove a path and its contents. On Windows platforms, this is wrapped with a wait loop that checks for the existence of the files.

test.support.make_legacy_pyc(source)

Move a PEP 3147/488 pyc file to its legacy pyc location and return the file system path to the legacy pyc file. The source value is the file system path to the source file. It does not need to exist, however the PEP 3147/488 pyc file must exist.

test.support.is_resource_enabled(resource)

Return True if resource is enabled and available. The list of available resources is only set when test.regrtest is executing the tests.

test.support.python_is_optimized()

Return True if Python was not built with -O0 or -Og.

test.support.with_pymalloc()

Return _testcapi.WITH_PYMALLOC.

test.support.requires(resource, msg=None)

Raise ResourceDenied if resource is not available. msg is the argument to ResourceDenied if it is raised. Always returns True if called by a function whose __name__ is '__main__'. Used when tests are executed by test.regrtest.

test.support.system_must_validate_cert(f)

Raise unittest.SkipTest on TLS certification validation failures.

test.support.sortdict(dict)

Return a repr of dict with keys sorted.

test.support.findfile(filename, subdir=None)

Return the path to the file named filename. If no match is found filename is returned. This does not equal a failure since it could be the path to the file.

Setting subdir indicates a relative path to use to find the file rather than looking directly in the path directories.

test.support.create_empty_file(filename)

Create an empty file with filename. If it already exists, truncate it.

test.support.fd_count()

Count the number of open file descriptors.

test.support.match_test(test)

Match test to patterns set in set_match_tests().

test.support.set_match_tests(patterns)

Define match test with regular expression patterns.

test.support.run_unittest(*classes)

Execute unittest.TestCase subclasses passed to the function. The function scans the classes for methods starting with the prefix test_ and executes the tests individually.

It is also legal to pass strings as parameters; these should be keys in sys.modules. Each associated module will be scanned by unittest.TestLoader.loadTestsFromModule(). This is usually seen in the following test_main() function:

def test_main():
    support.run_unittest(__name__)

This will run all tests defined in the named module.

test.support.run_doctest(module, verbosity=None, optionflags=0)

Run doctest.testmod() on the given module. Return (failure_count, test_count).

If verbosity is None, doctest.testmod() is run with verbosity set to verbose. Otherwise, it is run with verbosity set to None. optionflags is passed as optionflags to doctest.testmod().

test.support.setswitchinterval(interval)

Set the sys.setswitchinterval() to the given interval. Defines a minimum interval for Android systems to prevent the system from hanging.

test.support.check_impl_detail(**guards)

Use this check to guard CPython's implementation-specific tests or to run them only on the implementations guarded by the arguments:

check_impl_detail()               # Only on CPython (default).
check_impl_detail(jython=True)    # Only on Jython.
check_impl_detail(cpython=False)  # Everywhere except CPython.
test.support.check_warnings(*filters, quiet=True)

A convenience wrapper for warnings.catch_warnings() that makes it easier to test that a warning was correctly raised. It is approximately equivalent to calling warnings.catch_warnings(record=True) with warnings.simplefilter() set to always and with the option to automatically validate the results that are recorded.

check_warnings accepts 2-tuples of the form ("message regexp", WarningCategory) as positional arguments. If one or more filters are provided, or if the optional keyword argument quiet is False, it checks to make sure the warnings are as expected: each specified filter must match at least one of the warnings raised by the enclosed code or the test fails, and if any warnings are raised that do not match any of the specified filters the test fails. To disable the first of these checks, set quiet to True.

If no arguments are specified, it defaults to:

check_warnings(("", Warning), quiet=True)

In this case all warnings are caught and no errors are raised.

On entry to the context manager, a WarningRecorder instance is returned. The underlying warnings list from catch_warnings() is available via the recorder object's warnings attribute. As a convenience, the attributes of the object representing the most recent warning can also be accessed directly through the recorder object (see example below). If no warning has been raised, then any of the attributes that would otherwise be expected on an object representing a warning will return None.

The recorder object also has a reset() method, which clears the warnings list.

The context manager is designed to be used like this:

with check_warnings(("assertion is always true", SyntaxWarning),
                    ("", UserWarning)):
    exec('assert(False, "Hey!")')
    warnings.warn(UserWarning("Hide me!"))

In this case if either warning was not raised, or some other warning was raised, check_warnings() would raise an error.

When a test needs to look more deeply into the warnings, rather than just checking whether or not they occurred, code like this can be used:

with check_warnings(quiet=True) as w:
    warnings.warn("foo")
    assert str(w.args[0]) == "foo"
    warnings.warn("bar")
    assert str(w.args[0]) == "bar"
    assert str(w.warnings[0].args[0]) == "foo"
    assert str(w.warnings[1].args[0]) == "bar"
    w.reset()
    assert len(w.warnings) == 0

Here all warnings will be caught, and the test code tests the captured warnings directly.

3.2 版更變: New optional arguments filters and quiet.

test.support.check_no_resource_warning(testcase)

Context manager to check that no ResourceWarning was raised. You must remove the object which may emit ResourceWarning before the end of the context manager.

test.support.set_memlimit(limit)

Set the values for max_memuse and real_max_memuse for big memory tests.

test.support.record_original_stdout(stdout)

Store the value from stdout. It is meant to hold the stdout at the time the regrtest began.

test.support.get_original_stdout()

Return the original stdout set by record_original_stdout() or sys.stdout if it's not set.

test.support.strip_python_strerr(stderr)

Strip the stderr of a Python process from potential debug output emitted by the interpreter. This will typically be run on the result of subprocess.Popen.communicate().

test.support.args_from_interpreter_flags()

Return a list of command line arguments reproducing the current settings in sys.flags and sys.warnoptions.

test.support.optim_args_from_interpreter_flags()

Return a list of command line arguments reproducing the current optimization settings in sys.flags.

test.support.captured_stdin()
test.support.captured_stdout()
test.support.captured_stderr()

A context managers that temporarily replaces the named stream with io.StringIO object.

Example use with output streams:

with captured_stdout() as stdout, captured_stderr() as stderr:
    print("hello")
    print("error", file=sys.stderr)
assert stdout.getvalue() == "hello\n"
assert stderr.getvalue() == "error\n"

Example use with input stream:

with captured_stdin() as stdin:
    stdin.write('hello\n')
    stdin.seek(0)
    # call test code that consumes from sys.stdin
    captured = input()
self.assertEqual(captured, "hello")
test.support.temp_dir(path=None, quiet=False)

A context manager that creates a temporary directory at path and yields the directory.

If path is None, the temporary directory is created using tempfile.mkdtemp(). If quiet is False, the context manager raises an exception on error. Otherwise, if path is specified and cannot be created, only a warning is issued.

test.support.change_cwd(path, quiet=False)

A context manager that temporarily changes the current working directory to path and yields the directory.

If quiet is False, the context manager raises an exception on error. Otherwise, it issues only a warning and keeps the current working directory the same.

test.support.temp_cwd(name='tempcwd', quiet=False)

A context manager that temporarily creates a new directory and changes the current working directory (CWD).

The context manager creates a temporary directory in the current directory with name name before temporarily changing the current working directory. If name is None, the temporary directory is created using tempfile.mkdtemp().

If quiet is False and it is not possible to create or change the CWD, an error is raised. Otherwise, only a warning is raised and the original CWD is used.

test.support.temp_umask(umask)

A context manager that temporarily sets the process umask.

test.support.transient_internet(resource_name, *, timeout=30.0, errnos=())

A context manager that raises ResourceDenied when various issues with the internet connection manifest themselves as exceptions.

test.support.disable_faulthandler()

A context manager that replaces sys.stderr with sys.__stderr__.

test.support.gc_collect()

Force as many objects as possible to be collected. This is needed because timely deallocation is not guaranteed by the garbage collector. This means that __del__ methods may be called later than expected and weakrefs may remain alive for longer than expected.

test.support.disable_gc()

A context manager that disables the garbage collector upon entry and reenables it upon exit.

test.support.swap_attr(obj, attr, new_val)

Context manager to swap out an attribute with a new object.

Usage:

with swap_attr(obj, "attr", 5):
    ...

This will set obj.attr to 5 for the duration of the with block, restoring the old value at the end of the block. If attr doesn't exist on obj, it will be created and then deleted at the end of the block.

The old value (or None if it doesn't exist) will be assigned to the target of the "as" clause, if there is one.

test.support.swap_item(obj, attr, new_val)

Context manager to swap out an item with a new object.

Usage:

with swap_item(obj, "item", 5):
    ...

This will set obj["item"] to 5 for the duration of the with block, restoring the old value at the end of the block. If item doesn't exist on obj, it will be created and then deleted at the end of the block.

The old value (or None if it doesn't exist) will be assigned to the target of the "as" clause, if there is one.

test.support.wait_threads_exit(timeout=60.0)

Context manager to wait until all threads created in the with statement exit.

test.support.start_threads(threads, unlock=None)

Context manager to start threads. It attempts to join the threads upon exit.

test.support.calcobjsize(fmt)

Return struct.calcsize() for nP{fmt}0n or, if gettotalrefcount exists, 2PnP{fmt}0P.

test.support.calcvobjsize(fmt)

Return struct.calcsize() for nPn{fmt}0n or, if gettotalrefcount exists, 2PnPn{fmt}0P.

test.support.checksizeof(test, o, size)

For testcase test, assert that the sys.getsizeof for o plus the GC header size equals size.

Return True if the OS supports symbolic links, False otherwise.

test.support.can_xattr()

Return True if the OS supports xattr, False otherwise.

A decorator for running tests that require support for symbolic links.

@test.support.skip_unless_xattr

A decorator for running tests that require support for xattr.

@test.support.skip_unless_bind_unix_socket

A decorator for running tests that require a functional bind() for Unix sockets.

@test.support.anticipate_failure(condition)

A decorator to conditionally mark tests with unittest.expectedFailure(). Any use of this decorator should have an associated comment identifying the relevant tracker issue.

@test.support.run_with_locale(catstr, *locales)

A decorator for running a function in a different locale, correctly resetting it after it has finished. catstr is the locale category as a string (for example "LC_ALL"). The locales passed will be tried sequentially, and the first valid locale will be used.

@test.support.run_with_tz(tz)

A decorator for running a function in a specific timezone, correctly resetting it after it has finished.

@test.support.requires_freebsd_version(*min_version)

Decorator for the minimum version when running test on FreeBSD. If the FreeBSD version is less than the minimum, raise unittest.SkipTest.

@test.support.requires_linux_version(*min_version)

Decorator for the minimum version when running test on Linux. If the Linux version is less than the minimum, raise unittest.SkipTest.

@test.support.requires_mac_version(*min_version)

Decorator for the minimum version when running test on Mac OS X. If the MAC OS X version is less than the minimum, raise unittest.SkipTest.

@test.support.requires_IEEE_754

Decorator for skipping tests on non-IEEE 754 platforms.

@test.support.requires_zlib

Decorator for skipping tests if zlib doesn't exist.

@test.support.requires_gzip

Decorator for skipping tests if gzip doesn't exist.

@test.support.requires_bz2

Decorator for skipping tests if bz2 doesn't exist.

@test.support.requires_lzma

Decorator for skipping tests if lzma doesn't exist.

@test.support.requires_resource(resource)

Decorator for skipping tests if resource is not available.

@test.support.requires_docstrings

Decorator for only running the test if HAVE_DOCSTRINGS.

@test.support.cpython_only(test)

Decorator for tests only applicable to CPython.

@test.support.impl_detail(msg=None, **guards)

Decorator for invoking check_impl_detail() on guards. If that returns False, then uses msg as the reason for skipping the test.

@test.support.no_tracing(func)

Decorator to temporarily turn off tracing for the duration of the test.

@test.support.refcount_test(test)

Decorator for tests which involve reference counting. The decorator does not run the test if it is not run by CPython. Any trace function is unset for the duration of the test to prevent unexpected refcounts caused by the trace function.

@test.support.reap_threads(func)

Decorator to ensure the threads are cleaned up even if the test fails.

@test.support.bigmemtest(size, memuse, dry_run=True)

Decorator for bigmem tests.

size is a requested size for the test (in arbitrary, test-interpreted units.) memuse is the number of bytes per unit for the test, or a good estimate of it. For example, a test that needs two byte buffers, of 4 GiB each, could be decorated with @bigmemtest(size=_4G, memuse=2).

The size argument is normally passed to the decorated test method as an extra argument. If dry_run is True, the value passed to the test method may be less than the requested value. If dry_run is False, it means the test doesn't support dummy runs when -M is not specified.

@test.support.bigaddrspacetest(f)

Decorator for tests that fill the address space. f is the function to wrap.

test.support.make_bad_fd()

Create an invalid file descriptor by opening and closing a temporary file, and returning its descriptor.

test.support.check_syntax_error(testcase, statement, errtext='', *, lineno=None, offset=None)

Test for syntax errors in statement by attempting to compile statement. testcase is the unittest instance for the test. errtext is the text of the error raised by SyntaxError. If lineno is not None, compares to the line of the SyntaxError. If offset is not None, compares to the offset of the SyntaxError.

test.support.open_urlresource(url, *args, **kw)

Open url. If open fails, raises TestFailed.

test.support.import_module(name, deprecated=False, *, required_on())

This function imports and returns the named module. Unlike a normal import, this function raises unittest.SkipTest if the module cannot be imported.

Module and package deprecation messages are suppressed during this import if deprecated is True. If a module is required on a platform but optional for others, set required_on to an iterable of platform prefixes which will be compared against sys.platform.

3.1 版新加入.

test.support.import_fresh_module(name, fresh=(), blocked=(), deprecated=False)

This function imports and returns a fresh copy of the named Python module by removing the named module from sys.modules before doing the import. Note that unlike reload(), the original module is not affected by this operation.

fresh is an iterable of additional module names that are also removed from the sys.modules cache before doing the import.

blocked is an iterable of module names that are replaced with None in the module cache during the import to ensure that attempts to import them raise ImportError.

The named module and any modules named in the fresh and blocked parameters are saved before starting the import and then reinserted into sys.modules when the fresh import is complete.

Module and package deprecation messages are suppressed during this import if deprecated is True.

This function will raise ImportError if the named module cannot be imported.

Example use:

# Get copies of the warnings module for testing without affecting the
# version being used by the rest of the test suite. One copy uses the
# C implementation, the other is forced to use the pure Python fallback
# implementation
py_warnings = import_fresh_module('warnings', blocked=['_warnings'])
c_warnings = import_fresh_module('warnings', fresh=['_warnings'])

3.1 版新加入.

test.support.modules_setup()

Return a copy of sys.modules.

test.support.modules_cleanup(oldmodules)

Remove modules except for oldmodules and encodings in order to preserve internal cache.

test.support.threading_setup()

Return current thread count and copy of dangling threads.

test.support.threading_cleanup(*original_values)

Cleanup up threads not specified in original_values. Designed to emit a warning if a test leaves running threads in the background.

test.support.join_thread(thread, timeout=30.0)

Join a thread within timeout. Raise an AssertionError if thread is still alive after timeout seconds.

test.support.reap_children()

Use this at the end of test_main whenever sub-processes are started. This will help ensure that no extra children (zombies) stick around to hog resources and create problems when looking for refleaks.

test.support.get_attribute(obj, name)

Get an attribute, raising unittest.SkipTest if AttributeError is raised.

test.support.bind_port(sock, host=HOST)

Bind the socket to a free port and return the port number. Relies on ephemeral ports in order to ensure we are using an unbound port. This is important as many tests may be running simultaneously, especially in a buildbot environment. This method raises an exception if the sock.family is AF_INET and sock.type is SOCK_STREAM, and the socket has SO_REUSEADDR or SO_REUSEPORT set on it. Tests should never set these socket options for TCP/IP sockets. The only case for setting these options is testing multicasting via multiple UDP sockets.

Additionally, if the SO_EXCLUSIVEADDRUSE socket option is available (i.e. on Windows), it will be set on the socket. This will prevent anyone else from binding to our host/port for the duration of the test.

test.support.bind_unix_socket(sock, addr)

Bind a unix socket, raising unittest.SkipTest if PermissionError is raised.

test.support.find_unused_port(family=socket.AF_INET, socktype=socket.SOCK_STREAM)

Returns an unused port that should be suitable for binding. This is achieved by creating a temporary socket with the same family and type as the sock parameter (default is AF_INET, SOCK_STREAM), and binding it to the specified host address (defaults to 0.0.0.0) with the port set to 0, eliciting an unused ephemeral port from the OS. The temporary socket is then closed and deleted, and the ephemeral port is returned.

Either this method or bind_port() should be used for any tests where a server socket needs to be bound to a particular port for the duration of the test. Which one to use depends on whether the calling code is creating a Python socket, or if an unused port needs to be provided in a constructor or passed to an external program (i.e. the -accept argument to openssl's s_server mode). Always prefer bind_port() over find_unused_port() where possible. Using a hard coded port is discouraged since it can make multiple instances of the test impossible to run simultaneously, which is a problem for buildbots.

test.support.load_package_tests(pkg_dir, loader, standard_tests, pattern)

Generic implementation of the unittest load_tests protocol for use in test packages. pkg_dir is the root directory of the package; loader, standard_tests, and pattern are the arguments expected by load_tests. In simple cases, the test package's __init__.py can be the following:

import os
from test.support import load_package_tests

def load_tests(*args):
    return load_package_tests(os.path.dirname(__file__), *args)
test.support.fs_is_case_insensitive(directory)

Return True if the file system for directory is case-insensitive.

test.support.detect_api_mismatch(ref_api, other_api, *, ignore=())

Returns the set of attributes, functions or methods of ref_api not found on other_api, except for a defined list of items to be ignored in this check specified in ignore.

By default this skips private attributes beginning with '_' but includes all magic methods, i.e. those starting and ending in '__'.

3.5 版新加入.

test.support.patch(test_instance, object_to_patch, attr_name, new_value)

Override object_to_patch.attr_name with new_value. Also add cleanup procedure to test_instance to restore object_to_patch for attr_name. The attr_name should be a valid attribute for object_to_patch.

test.support.run_in_subinterp(code)

Run code in subinterpreter. Raise unittest.SkipTest if tracemalloc is enabled.

test.support.check_free_after_iterating(test, iter, cls, args=())

Assert that iter is deallocated after iterating.

test.support.missing_compiler_executable(cmd_names=[])

Check for the existence of the compiler executables whose names are listed in cmd_names or all the compiler executables when cmd_names is empty and return the first missing executable or None when none is found missing.

test.support.check__all__(test_case, module, name_of_module=None, extra=(), blacklist=())

Assert that the __all__ variable of module contains all public names.

The module's public names (its API) are detected automatically based on whether they match the public name convention and were defined in module.

The name_of_module argument can specify (as a string or tuple thereof) what module(s) an API could be defined in order to be detected as a public API. One case for this is when module imports part of its public API from other modules, possibly a C backend (like csv and its _csv).

The extra argument can be a set of names that wouldn't otherwise be automatically detected as "public", like objects without a proper __module__ attribute. If provided, it will be added to the automatically detected ones.

The blacklist argument can be a set of names that must not be treated as part of the public API even though their names indicate otherwise.

Example use:

import bar
import foo
import unittest
from test import support

class MiscTestCase(unittest.TestCase):
    def test__all__(self):
        support.check__all__(self, foo)

class OtherTestCase(unittest.TestCase):
    def test__all__(self):
        extra = {'BAR_CONST', 'FOO_CONST'}
        blacklist = {'baz'}  # Undocumented name.
        # bar imports part of its API from _bar.
        support.check__all__(self, bar, ('bar', '_bar'),
                             extra=extra, blacklist=blacklist)

3.6 版新加入.

test.support.adjust_int_max_str_digits(max_digits)

This function returns a context manager that will change the global sys.set_int_max_str_digits() setting for the duration of the context to allow execution of test code that needs a different limit on the number of digits when converting between an integer and string.

3.7.14 版新加入.

The test.support module defines the following classes:

class test.support.TransientResource(exc, **kwargs)

Instances are a context manager that raises ResourceDenied if the specified exception type is raised. Any keyword arguments are treated as attribute/value pairs to be compared against any exception raised within the with statement. Only if all pairs match properly against attributes on the exception is ResourceDenied raised.

class test.support.EnvironmentVarGuard

Class used to temporarily set or unset environment variables. Instances can be used as a context manager and have a complete dictionary interface for querying/modifying the underlying os.environ. After exit from the context manager all changes to environment variables done through this instance will be rolled back.

3.1 版更變: Added dictionary interface.

EnvironmentVarGuard.set(envvar, value)

Temporarily set the environment variable envvar to the value of value.

EnvironmentVarGuard.unset(envvar)

Temporarily unset the environment variable envvar.

class test.support.SuppressCrashReport

A context manager used to try to prevent crash dialog popups on tests that are expected to crash a subprocess.

On Windows, it disables Windows Error Reporting dialogs using SetErrorMode.

On UNIX, resource.setrlimit() is used to set resource.RLIMIT_CORE's soft limit to 0 to prevent coredump file creation.

On both platforms, the old value is restored by __exit__().

class test.support.CleanImport(*module_names)

A context manager to force import to return a new module reference. This is useful for testing module-level behaviors, such as the emission of a DeprecationWarning on import. Example usage:

with CleanImport('foo'):
    importlib.import_module('foo')  # New reference.
class test.support.DirsOnSysPath(*paths)

A context manager to temporarily add directories to sys.path.

This makes a copy of sys.path, appends any directories given as positional arguments, then reverts sys.path to the copied settings when the context ends.

Note that all sys.path modifications in the body of the context manager, including replacement of the object, will be reverted at the end of the block.

class test.support.SaveSignals

Class to save and restore signal handlers registered by the Python signal handler.

class test.support.Matcher
matches(self, d, **kwargs)

Try to match a single dict with the supplied arguments.

match_value(self, k, dv, v)

Try to match a single stored value (dv) with a supplied value (v).

class test.support.WarningsRecorder

Class used to record warnings for unit tests. See documentation of check_warnings() above for more details.

class test.support.BasicTestRunner
run(test)

Run test and return the result.

class test.support.TestHandler(logging.handlers.BufferingHandler)

Class for logging support.

class test.support.FakePath(path)

Simple path-like object. It implements the __fspath__() method which just returns the path argument. If path is an exception, it will be raised in __fspath__().

test.support.script_helper --- Utilities for the Python execution tests

The test.support.script_helper module provides support for Python's script execution tests.

test.support.script_helper.interpreter_requires_environment()

Return True if sys.executable interpreter requires environment variables in order to be able to run at all.

This is designed to be used with @unittest.skipIf() to annotate tests that need to use an assert_python*() function to launch an isolated mode (-I) or no environment mode (-E) sub-interpreter process.

A normal build & test does not run into this situation but it can happen when trying to run the standard library test suite from an interpreter that doesn't have an obvious home with Python's current home finding logic.

Setting PYTHONHOME is one way to get most of the testsuite to run in that situation. PYTHONPATH or PYTHONUSERSITE are other common environment variables that might impact whether or not the interpreter can start.

test.support.script_helper.run_python_until_end(*args, **env_vars)

Set up the environment based on env_vars for running the interpreter in a subprocess. The values can include __isolated, __cleanenv, __cwd, and TERM.

test.support.script_helper.assert_python_ok(*args, **env_vars)

Assert that running the interpreter with args and optional environment variables env_vars succeeds (rc == 0) and return a (return code, stdout, stderr) tuple.

If the __cleanenv keyword is set, env_vars is used as a fresh environment.

Python is started in isolated mode (command line option -I), except if the __isolated keyword is set to False.

test.support.script_helper.assert_python_failure(*args, **env_vars)

Assert that running the interpreter with args and optional environment variables env_vars fails (rc != 0) and return a (return code, stdout, stderr) tuple.

See assert_python_ok() for more options.

test.support.script_helper.spawn_python(*args, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, **kw)

Run a Python subprocess with the given arguments.

kw is extra keyword args to pass to subprocess.Popen(). Returns a subprocess.Popen object.

test.support.script_helper.kill_python(p)

Run the given subprocess.Popen process until completion and return stdout.

test.support.script_helper.make_script(script_dir, script_basename, source, omit_suffix=False)

Create script containing source in path script_dir and script_basename. If omit_suffix is False, append .py to the name. Return the full script path.

test.support.script_helper.make_zip_script(zip_dir, zip_basename, script_name, name_in_zip=None)

Create zip file at zip_dir and zip_basename with extension zip which contains the files in script_name. name_in_zip is the archive name. Return a tuple containing (full path, full path of archive name).

test.support.script_helper.make_pkg(pkg_dir, init_source='')

Create a directory named pkg_dir containing an __init__ file with init_source as its contents.

test.support.script_helper.make_zip_pkg(zip_dir, zip_basename, pkg_name, script_basename, source, depth=1, compiled=False)

Create a zip package directory with a path of zip_dir and zip_basename containing an empty __init__ file and a file script_basename containing the source. If compiled is True, both source files will be compiled and added to the zip package. Return a tuple of the full zip path and the archive name for the zip file.