Tuple（元組）物件

type PyTupleObject

This subtype of PyObject represents a Python tuple object.

PyTypeObject PyTuple_Type

為 穩定 ABI 的一部分.

This instance of PyTypeObject represents the Python tuple type; it is the same object as tuple in the Python layer.

int PyTuple_Check(PyObject *p)

Return true if p is a tuple object or an instance of a subtype of the tuple type. This function always succeeds.

int PyTuple_CheckExact(PyObject *p)

Return true if p is a tuple object, but not an instance of a subtype of the tuple type. This function always succeeds.

PyObject *PyTuple_New(Py_ssize_t len)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return a new tuple object of size len, or NULL with an exception set on failure.

PyObject *PyTuple_Pack(Py_ssize_t n, ...)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return a new tuple object of size n, or NULL with an exception set on failure. The tuple values are initialized to the subsequent n C arguments pointing to Python objects. PyTuple_Pack(2, a, b) is equivalent to Py_BuildValue("(OO)", a, b).

Py_ssize_t PyTuple_Size(PyObject *p)

為 穩定 ABI 的一部分.

Take a pointer to a tuple object, and return the size of that tuple. On error, return -1 and with an exception set.

Py_ssize_t PyTuple_GET_SIZE(PyObject *p)

Like PyTuple_Size(), but without error checking.

PyObject *PyTuple_GetItem(PyObject *p, Py_ssize_t pos)

回傳值：借用參照。 為 穩定 ABI 的一部分.

Return the object at position pos in the tuple pointed to by p. If pos is negative or out of bounds, return NULL and set an IndexError exception.

The returned reference is borrowed from the tuple p (that is: it is only valid as long as you hold a reference to p). To get a strong reference, use Py_NewRef(PyTuple_GetItem(...)) or PySequence_GetItem().

PyObject *PyTuple_GET_ITEM(PyObject *p, Py_ssize_t pos)

回傳值：借用參照。

Like PyTuple_GetItem(), but does no checking of its arguments.

PyObject *PyTuple_GetSlice(PyObject *p, Py_ssize_t low, Py_ssize_t high)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return the slice of the tuple pointed to by p between low and high, or NULL with an exception set on failure.

This is the equivalent of the Python expression p[low:high]. Indexing from the end of the tuple is not supported.

int PyTuple_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o)

為 穩定 ABI 的一部分.

Insert a reference to object o at position pos of the tuple pointed to by p. Return 0 on success. If pos is out of bounds, return -1 and set an IndexError exception.

備註

This function "steals" a reference to o and discards a reference to an item already in the tuple at the affected position.

void PyTuple_SET_ITEM(PyObject *p, Py_ssize_t pos, PyObject *o)

Like PyTuple_SetItem(), but does no error checking, and should only be used to fill in brand new tuples.

備註

This function "steals" a reference to o, and, unlike PyTuple_SetItem(), does not discard a reference to any item that is being replaced; any reference in the tuple at position pos will be leaked.

int _PyTuple_Resize(PyObject **p, Py_ssize_t newsize)

Can be used to resize a tuple. newsize will be the new length of the tuple. Because tuples are supposed to be immutable, this should only be used if there is only one reference to the object. Do not use this if the tuple may already be known to some other part of the code. The tuple will always grow or shrink at the end. Think of this as destroying the old tuple and creating a new one, only more efficiently. Returns 0 on success. Client code should never assume that the resulting value of *p will be the same as before calling this function. If the object referenced by *p is replaced, the original *p is destroyed. On failure, returns -1 and sets *p to NULL, and raises MemoryError or SystemError.

Struct Sequence Objects

Struct sequence objects are the C equivalent of namedtuple() objects, i.e. a sequence whose items can also be accessed through attributes. To create a struct sequence, you first have to create a specific struct sequence type.

PyTypeObject *PyStructSequence_NewType(PyStructSequence_Desc *desc)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Create a new struct sequence type from the data in desc, described below. Instances of the resulting type can be created with PyStructSequence_New().

Return NULL with an exception set on failure.

void PyStructSequence_InitType(PyTypeObject *type, PyStructSequence_Desc *desc)

Initializes a struct sequence type type from desc in place.

int PyStructSequence_InitType2(PyTypeObject *type, PyStructSequence_Desc *desc)

Like PyStructSequence_InitType(), but returns 0 on success and -1 with an exception set on failure.

在 3.4 版被加入.

type PyStructSequence_Desc

為 穩定 ABI 的一部分 （包含所有成員）.

Contains the meta information of a struct sequence type to create.

const char *name

Fully qualified name of the type; null-terminated UTF-8 encoded. The name must contain the module name.

const char *doc

Pointer to docstring for the type or NULL to omit.

PyStructSequence_Field *fields

Pointer to NULL-terminated array with field names of the new type.

int n_in_sequence

Number of fields visible to the Python side (if used as tuple).

type PyStructSequence_Field

為 穩定 ABI 的一部分 （包含所有成員）.

Describes a field of a struct sequence. As a struct sequence is modeled as a tuple, all fields are typed as PyObject*. The index in the fields array of the PyStructSequence_Desc determines which field of the struct sequence is described.

const char *name

Name for the field or NULL to end the list of named fields, set to PyStructSequence_UnnamedField to leave unnamed.

const char *doc

Field docstring or NULL to omit.

const char *const PyStructSequence_UnnamedField

為 穩定 ABI 的一部分 自 3.11 版本開始.

Special value for a field name to leave it unnamed.

在 3.9 版的變更: The type was changed from char *.

PyObject *PyStructSequence_New(PyTypeObject *type)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Creates an instance of type, which must have been created with PyStructSequence_NewType().

Return NULL with an exception set on failure.

PyObject *PyStructSequence_GetItem(PyObject *p, Py_ssize_t pos)

回傳值：借用參照。 為 穩定 ABI 的一部分.

Return the object at position pos in the struct sequence pointed to by p. No bounds checking is performed.

PyObject *PyStructSequence_GET_ITEM(PyObject *p, Py_ssize_t pos)

回傳值：借用參照。

Macro equivalent of PyStructSequence_GetItem().

void PyStructSequence_SetItem(PyObject *p, Py_ssize_t pos, PyObject *o)

為 穩定 ABI 的一部分.

Sets the field at index pos of the struct sequence p to value o. Like PyTuple_SET_ITEM(), this should only be used to fill in brand new instances.

備註

This function "steals" a reference to o.

void PyStructSequence_SET_ITEM(PyObject *p, Py_ssize_t *pos, PyObject *o)

Similar to PyStructSequence_SetItem(), but implemented as a static inlined function.

備註

This function "steals" a reference to o.