# `cmath` — Matematyczne funkcje dla liczb zespolonych¶

Ten moduł zapewnia dostęp do funkcji matematycznych dla liczb zespolonych. Funkcje w tym module akceptują liczby całkowite, liczby zmiennoprzecinkowe lub liczby zespolone jako argumenty. Funkcje w tym module zaakceptują również obiekty Python które zawierają metody `__complex__()` lub `__float__()`: te metody są używane do konwertowania obiektów do liczb zmiennoprzecinkowych lub zespolonych, odpowiednio, a funkcje używają później wyników konwersji.

Informacja

On platforms with hardware and system-level support for signed zeros, functions involving branch cuts are continuous on both sides of the branch cut: the sign of the zero distinguishes one side of the branch cut from the other. On platforms that do not support signed zeros the continuity is as specified below.

## Conversions to and from polar coordinates¶

A Python complex number `z` is stored internally using rectangular or Cartesian coordinates. It is completely determined by its real part `z.real` and its imaginary part `z.imag`. In other words:

```z == z.real + z.imag*1j
```

Polar coordinates give an alternative way to represent a complex number. In polar coordinates, a complex number z is defined by the modulus r and the phase angle phi. The modulus r is the distance from z to the origin, while the phase phi is the counterclockwise angle, measured in radians, from the positive x-axis to the line segment that joins the origin to z.

The following functions can be used to convert from the native rectangular coordinates to polar coordinates and back.

`cmath.``phase`(x)

Return the phase of x (also known as the argument of x), as a float. `phase(x)` is equivalent to ```math.atan2(x.imag, x.real)```. The result lies in the range [-π, π], and the branch cut for this operation lies along the negative real axis, continuous from above. On systems with support for signed zeros (which includes most systems in current use), this means that the sign of the result is the same as the sign of `x.imag`, even when `x.imag` is zero:

```>>> phase(complex(-1.0, 0.0))
3.141592653589793
>>> phase(complex(-1.0, -0.0))
-3.141592653589793
```

Informacja

The modulus (absolute value) of a complex number x can be computed using the built-in `abs()` function. There is no separate `cmath` module function for this operation.

`cmath.``polar`(x)

Return the representation of x in polar coordinates. Returns a pair `(r, phi)` where r is the modulus of x and phi is the phase of x. `polar(x)` is equivalent to ```(abs(x), phase(x))```.

`cmath.``rect`(r, phi)

Return the complex number x with polar coordinates r and phi. Equivalent to `r * (math.cos(phi) + math.sin(phi)*1j)`.

## Power and logarithmic functions¶

`cmath.``exp`(x)

Return e raised to the power x, where e is the base of natural logarithms.

`cmath.``log`(x[, base])

Returns the logarithm of x to the given base. If the base is not specified, returns the natural logarithm of x. There is one branch cut, from 0 along the negative real axis to -∞, continuous from above.

`cmath.``log10`(x)

Return the base-10 logarithm of x. This has the same branch cut as `log()`.

`cmath.``sqrt`(x)

Return the square root of x. This has the same branch cut as `log()`.

## Trigonometric functions¶

`cmath.``acos`(x)

Return the arc cosine of x. There are two branch cuts: One extends right from 1 along the real axis to ∞, continuous from below. The other extends left from -1 along the real axis to -∞, continuous from above.

`cmath.``asin`(x)

Return the arc sine of x. This has the same branch cuts as `acos()`.

`cmath.``atan`(x)

Return the arc tangent of x. There are two branch cuts: One extends from `1j` along the imaginary axis to `∞j`, continuous from the right. The other extends from `-1j` along the imaginary axis to `-∞j`, continuous from the left.

`cmath.``cos`(x)

Return the cosine of x.

`cmath.``sin`(x)

Return the sine of x.

`cmath.``tan`(x)

Return the tangent of x.

## Hyperbolic functions¶

`cmath.``acosh`(x)

Return the inverse hyperbolic cosine of x. There is one branch cut, extending left from 1 along the real axis to -∞, continuous from above.

`cmath.``asinh`(x)

Return the inverse hyperbolic sine of x. There are two branch cuts: One extends from `1j` along the imaginary axis to `∞j`, continuous from the right. The other extends from `-1j` along the imaginary axis to `-∞j`, continuous from the left.

`cmath.``atanh`(x)

Return the inverse hyperbolic tangent of x. There are two branch cuts: One extends from `1` along the real axis to `∞`, continuous from below. The other extends from `-1` along the real axis to `-∞`, continuous from above.

`cmath.``cosh`(x)

Zwraca cosinus hiperboliczny z x.

`cmath.``sinh`(x)

Zwraca sinus hiperboliczny z x.

`cmath.``tanh`(x)

Zwraca tangens hiperboliczny z x.

## Funkcje klasyfikujące¶

`cmath.``isfinite`(x)

Zwraca 1 `True` jeżeli obie rzeczywista i urojona część x są skończone, i 2``False`` w innym wypadku.

Nowe w wersji 3.2.

`cmath.``isinf`(x)

Return `True` if either the real or the imaginary part of x is an infinity, and `False` otherwise.

`cmath.``isnan`(x)

Return `True` if either the real or the imaginary part of x is a NaN, and `False` otherwise.

`cmath.``isclose`(a, b, *, rel_tol=1e-09, abs_tol=0.0)

Zwraca 1``True`` jeżeli wartości a i b są zbliżone do siebie i 2``False`` w innym wypadku.

To czy dwie wartości są zbliżone do siebie, zależy od dostarczonej absolutnej lub relatywnej tolerancji.

rel_tol is the relative tolerance – it is the maximum allowed difference between a and b, relative to the larger absolute value of a or b. For example, to set a tolerance of 5%, pass `rel_tol=0.05`. The default tolerance is `1e-09`, which assures that the two values are the same within about 9 decimal digits. rel_tol must be greater than zero.

abs_tol is the minimum absolute tolerance – useful for comparisons near zero. abs_tol must be at least zero.

If no errors occur, the result will be: `abs(a-b) <= max(rel_tol * max(abs(a), abs(b)), abs_tol)`.

The IEEE 754 special values of `NaN`, `inf`, and `-inf` will be handled according to IEEE rules. Specifically, `NaN` is not considered close to any other value, including `NaN`. `inf` and `-inf` are only considered close to themselves.

Nowe w wersji 3.5.

Zobacz także

PEP 485 – A function for testing approximate equality

## Stały¶

`cmath.``pi`

Stałą matematyczną π, jako liczbę zmiennoprzecinkową

`cmath.``e`

Stałą matematyczną e, jako liczbę zmiennoprzecinkową

`cmath.``tau`

Stałą matematyczną τ, jako liczbę zmiennoprzecinkową

Nowe w wersji 3.6.

`cmath.``inf`

Floating-point positive infinity. Equivalent to `float('inf')`.

Nowe w wersji 3.6.

`cmath.``infj`

Complex number with zero real part and positive infinity imaginary part. Equivalent to `complex(0.0, float('inf'))`.

Nowe w wersji 3.6.

`cmath.``nan`

A floating-point „not a number” (NaN) value. Equivalent to `float('nan')`.

Nowe w wersji 3.6.

`cmath.``nanj`

Complex number with zero real part and NaN imaginary part. Equivalent to `complex(0.0, float('nan'))`.

Nowe w wersji 3.6.

Note that the selection of functions is similar, but not identical, to that in module `math`. The reason for having two modules is that some users aren’t interested in complex numbers, and perhaps don’t even know what they are. They would rather have `math.sqrt(-1)` raise an exception than return a complex number. Also note that the functions defined in `cmath` always return a complex number, even if the answer can be expressed as a real number (in which case the complex number has an imaginary part of zero).

A note on branch cuts: They are curves along which the given function fails to be continuous. They are a necessary feature of many complex functions. It is assumed that if you need to compute with complex functions, you will understand about branch cuts. Consult almost any (not too elementary) book on complex variables for enlightenment. For information of the proper choice of branch cuts for numerical purposes, a good reference should be the following:

Zobacz także

Kahan, W: Branch cuts for complex elementary functions; or, Much ado about nothing’s sign bit. In Iserles, A., and Powell, M. (eds.), The state of the art in numerical analysis. Clarendon Press (1987) pp165–211.