25.5. IDLE¶
ソースコード: Lib/idlelib/
IDLE は Python の統合開発環境で、学習用環境です。
IDLE は次のような特徴があります:
tkinterGUIツールキットを使って、100% ピュア Python でコーディングされていますクロスプラットホーム: Windows, Unix, macOS で動作します
コード入力、出力、エラーメッセージの色付け機能を持った Python shell (対話的インタプリタ) ウィンドウ
多段 Undo、 Python 対応の色づけ、自動的な字下げ、呼び出し情報の表示、自動補完、他たくさんの機能をもつマルチウィンドウ・テキストエディタ
任意のウィンドウ内での検索、エディタウィンドウ内での置換、複数ファイルを跨いだ検索 (grep)
永続的なブレイクポイント、ステップ実行、グローバルとローカル名前空間の視覚化機能を持ったデバッガ
設定、ブラウザ群、ほかダイアログ群
25.5.3. スタートアップとコードの実行¶
-s オプションとともに起動すると、IDLE は環境変数 IDLESTARTUP か PYTHONSTARTUP で参照されているファイルを実行します。 IDLE はまず IDLESTARTUP をチェックし、あれば参照しているファイルを実行します。 IDLESTARTUP が無ければ、IDLE は PYTHONSTARTUP をチェックします。これらの環境変数で参照されているファイルは、IDLE シェルでよく使う関数を置いたり、一般的なモジュールの import 文を実行するのに便利です。
加えて、Tk もスタートアップファイルがあればそれをロードします。その Tk のファイルは無条件にロードされることに注意してください。このファイルは .Idle.py で、ユーザーのホームディレクトリから探されます。このファイルの中の文は Tk の名前空間で実行されるので、IDLE の Python シェルで使う関数を import するのには便利ではありません。
25.5.3.1. コマンドラインの使い方¶
idle.py [-c command] [-d] [-e] [-h] [-i] [-r file] [-s] [-t title] [-] [arg] ...
-c command run command in the shell window
-d enable debugger and open shell window
-e open editor window
-h print help message with legal combinations and exit
-i open shell window
-r file run file in shell window
-s run $IDLESTARTUP or $PYTHONSTARTUP first, in shell window
-t title set title of shell window
- run stdin in shell (- must be last option before args)
引数がある場合 (訳注: 以下の説明、たぶん実情に反してますが一応訳しています):
-,-c,-rのどれかを使う場合、全ての引数はsys.argv[1:...]に入り、sys.argv[0]には'','-c','-r'の、与えたものが入ります。 Options ダイアログでデフォルトだったとしても Editor ウィンドウが開くことはありません。これ以外の場合は引数は編集対象のファイルとして開かれて、
sys.argvには IDLE そのものに渡された引数が反映されます。
25.5.3.2. Startup failure¶
IDLE uses a socket to communicate between the IDLE GUI process and the user
code execution process. A connection must be established whenever the Shell
starts or restarts. (The latter is indicated by a divider line that says
'RESTART'). If the user process fails to connect to the GUI process, it
displays a Tk error box with a 'cannot connect' message that directs the
user here. It then exits.
A common cause of failure is a user-written file with the same name as a standard library module, such as random.py and tkinter.py. When such a file is located in the same directory as a file that is about to be run, IDLE cannot import the stdlib file. The current fix is to rename the user file.
Though less common than in the past, an antivirus or firewall program may stop the connection. If the program cannot be taught to allow the connection, then it must be turned off for IDLE to work. It is safe to allow this internal connection because no data is visible on external ports. A similar problem is a network mis-configuration that blocks connections.
Python installation issues occasionally stop IDLE: multiple versions can clash, or a single installation might need admin access. If one undo the clash, or cannot or does not want to run as admin, it might be easiest to completely remove Python and start over.
A zombie pythonw.exe process could be a problem. On Windows, use Task Manager to detect and stop one. Sometimes a restart initiated by a program crash or Keyboard Interrupt (control-C) may fail to connect. Dismissing the error box or Restart Shell on the Shell menu may fix a temporary problem.
When IDLE first starts, it attempts to read user configuration files in ~/.idlerc/ (~ is one's home directory). If there is a problem, an error message should be displayed. Leaving aside random disk glitches, this can be prevented by never editing the files by hand, using the configuration dialog, under Options, instead Options. Once it happens, the solution may be to delete one or more of the configuration files.
If IDLE quits with no message, and it was not started from a console, try
starting from a console (python -m idlelib) and see if a message appears.
25.5.3.3. Running user code¶
With rare exceptions, the result of executing Python code with IDLE is
intended to be the same as executing the same code by the default method,
directly with Python in a text-mode system console or terminal window.
However, the different interface and operation occasionally affect
visible results. For instance, sys.modules starts with more entries,
and threading.activeCount() returns 2 instead of 1.
By default, IDLE runs user code in a separate OS process rather than in
the user interface process that runs the shell and editor. In the execution
process, it replaces sys.stdin, sys.stdout, and sys.stderr
with objects that get input from and send output to the Shell window.
The original values stored in sys.__stdin__, sys.__stdout__, and
sys.__stderr__ are not touched, but may be None.
When Shell has the focus, it controls the keyboard and screen. This is normally transparent, but functions that directly access the keyboard and screen will not work. These include system-specific functions that determine whether a key has been pressed and if so, which.
IDLE's standard stream replacements are not inherited by subprocesses
created in the execution process, whether directly by user code or by modules
such as multiprocessing. If such subprocess use input from sys.stdin
or print or write to sys.stdout or sys.stderr,
IDLE should be started in a command line window. The secondary subprocess
will then be attached to that window for input and output.
If sys is reset by user code, such as with importlib.reload(sys),
IDLE's changes are lost and input from the keyboard and output to the screen
will not work correctly.
25.5.3.4. User output in Shell¶
When a program outputs text, the result is determined by the
corresponding output device. When IDLE executes user code, sys.stdout
and sys.stderr are connected to the display area of IDLE's Shell. Some of
its features are inherited from the underlying Tk Text widget. Others
are programmed additions. Where it matters, Shell is designed for development
rather than production runs.
For instance, Shell never throws away output. A program that sends unlimited output to Shell will eventually fill memory, resulting in a memory error. In contrast, some system text windows only keep the last n lines of output. A Windows console, for instance, keeps a user-settable 1 to 9999 lines, with 300 the default.
Text widgets display a subset of Unicode, the Basic Multilingual Plane (BMP).
Which characters get a proper glyph instead of a replacement box depends on
the operating system and installed fonts. Newline characters cause following
text to appear on a new line, but other control characters are either
replaced with a box or deleted. However, repr(), which is used for
interactive echo of expression values, replaces control characters,
some BMP codepoints, and all non-BMP characters with escape codes
before they are output.
Normal and error output are generally kept separate (on separate lines) from code input and each other. They each get different highlight colors.
For SyntaxError tracebacks, the normal '^' marking where the error was detected is replaced by coloring the text with an error highlight. When code run from a file causes other exceptions, one may right click on a traceback line to jump to the corresponding line in an IDLE editor. The file will be opened if necessary.
Shell has a special facility for squeezing output lines down to a 'Squeezed text' label. This is done automatically for output over N lines (N = 50 by default). N can be changed in the PyShell section of the General page of the Settings dialog. Output with fewer lines can be squeezed by right clicking on the output. This can be useful lines long enough to slow down scrolling.
Squeezed output is expanded in place by double-clicking the label. It can also be sent to the clipboard or a separate view window by right-clicking the label.
25.5.3.5. Developing tkinter applications¶
IDLE is intentionally different from standard Python in order to
facilitate development of tkinter programs. Enter import tkinter as tk;
root = tk.Tk() in standard Python and nothing appears. Enter the same
in IDLE and a tk window appears. In standard Python, one must also enter
root.update() to see the window. IDLE does the equivalent in the
background, about 20 times a second, which is about every 50 milleseconds.
Next enter b = tk.Button(root, text='button'); b.pack(). Again,
nothing visibly changes in standard Python until one enters root.update().
Most tkinter programs run root.mainloop(), which usually does not
return until the tk app is destroyed. If the program is run with
python -i or from an IDLE editor, a >>> shell prompt does not
appear until mainloop() returns, at which time there is nothing left
to interact with.
When running a tkinter program from an IDLE editor, one can comment out the mainloop call. One then gets a shell prompt immediately and can interact with the live application. One just has to remember to re-enable the mainloop call when running in standard Python.
25.5.3.6. サブプロセスを起こさずに起動する¶
デフォルトでは、IDLE でのユーザコードの実行は、内部的なループバックインターフェイスを使用する、ソケット経由の分離されたサブプロセスで行われます。この接続は外部からは見えませんし、インターネットとのデータの送受信は行われません。ファイアウォールソフトウェアの警告が発生しても、無視して構いません。
If the attempt to make the socket connection fails, Idle will notify you. Such failures are sometimes transient, but if persistent, the problem may be either a firewall blocking the connection or misconfiguration of a particular system. Until the problem is fixed, one can run Idle with the -n command line switch.
IDLE を -n コマンドラインスイッチを使って開始した場合、IDLE は単一のプロセス内で動作し、RPC Python 実行サーバを走らせるサブプロセスを作りません。これは、プラットフォーム上で Python がサブプロセスや RPC ソケットインターフェイスを作れない場合に有用かもしれません。ただし、このモードではユーザコードが IDLE 自身から隔離されませんし、Run/Run Module (F5) 選択時に環境が再起動されてまっさらな状態になることもありません。コードを変更した場合、影響するモジュールを reload() しないといけませんし、変更を反映するには、すべての特定の項目 (from foo import baz など) を再インポートしないといけません。これらの理由から、可能なら常にデフォルトのサブプロセスを起こすモードで IDLE を起動するのが吉です。
バージョン 3.4 で非推奨.
25.5.4. ヘルプとお好み設定¶
25.5.4.1. Help sources¶
Help menu entry "IDLE Help" displays a formatted html version of the IDLE chapter of the Library Reference. The result, in a read-only tkinter text window, is close to what one sees in a web browser. Navigate through the text with a mousewheel, the scrollbar, or up and down arrow keys held down. Or click the TOC (Table of Contents) button and select a section header in the opened box.
Help menu entry "Python Docs" opens the extensive sources of help, including tutorials, available at docs.python.org/x.y, where 'x.y' is the currently running Python version. If your system has an off-line copy of the docs (this may be an installation option), that will be opened instead.
Selected URLs can be added or removed from the help menu at any time using the General tab of the Configure IDLE dialog .
25.5.4.2. Setting preferences [お好み設定]¶
The font preferences, highlighting, keys, and general preferences can be changed via Configure IDLE on the Option menu. Keys can be user defined; IDLE ships with four built-in key sets. In addition, a user can create a custom key set in the Configure IDLE dialog under the keys tab.
25.5.4.3. IDLE on macOS¶
Under System Preferences: Dock, one can set "Prefer tabs when opening documents" to "Always". This setting is not compatible with the tk/tkinter GUI framework used by IDLE, and it breaks a few IDLE features.
25.5.4.4. Extensions [拡張]¶
IDLE contains an extension facility. Preferences for extensions can be changed with the Extensions tab of the preferences dialog. See the beginning of config-extensions.def in the idlelib directory for further information. The only current default extension is zzdummy, an example also used for testing.