time
--- Akses waktu dan konversi¶
This module provides various time-related functions. For related
functionality, see also the datetime
and calendar
modules.
Although this module is always available, not all functions are available on all platforms. Most of the functions defined in this module call platform C library functions with the same name. It may sometimes be helpful to consult the platform documentation, because the semantics of these functions varies among platforms.
An explanation of some terminology and conventions is in order.
The epoch is the point where the time starts, and is platform dependent. For Unix, the epoch is January 1, 1970, 00:00:00 (UTC). To find out what the epoch is on a given platform, look at
time.gmtime(0)
.
The term seconds since the epoch refers to the total number of elapsed seconds since the epoch, typically excluding leap seconds. Leap seconds are excluded from this total on all POSIX-compliant platforms.
The functions in this module may not handle dates and times before the epoch or far in the future. The cut-off point in the future is determined by the C library; for 32-bit systems, it is typically in 2038.
Function
strptime()
can parse 2-digit years when given%y
format code. When 2-digit years are parsed, they are converted according to the POSIX and ISO C standards: values 69--99 are mapped to 1969--1999, and values 0--68 are mapped to 2000--2068.
UTC is Coordinated Universal Time (formerly known as Greenwich Mean Time, or GMT). The acronym UTC is not a mistake but a compromise between English and French.
DST is Daylight Saving Time, an adjustment of the timezone by (usually) one hour during part of the year. DST rules are magic (determined by local law) and can change from year to year. The C library has a table containing the local rules (often it is read from a system file for flexibility) and is the only source of True Wisdom in this respect.
The precision of the various real-time functions may be less than suggested by the units in which their value or argument is expressed. E.g. on most Unix systems, the clock "ticks" only 50 or 100 times a second.
On the other hand, the precision of
time()
andsleep()
is better than their Unix equivalents: times are expressed as floating point numbers,time()
returns the most accurate time available (using Unixgettimeofday()
where available), andsleep()
will accept a time with a nonzero fraction (Unixselect()
is used to implement this, where available).The time value as returned by
gmtime()
,localtime()
, andstrptime()
, and accepted byasctime()
,mktime()
andstrftime()
, is a sequence of 9 integers. The return values ofgmtime()
,localtime()
, andstrptime()
also offer attribute names for individual fields.See
struct_time
for a description of these objects.Berubah pada versi 3.3: The
struct_time
type was extended to provide thetm_gmtoff
andtm_zone
attributes when platform supports correspondingstruct tm
members.Berubah pada versi 3.6: The
struct_time
attributestm_gmtoff
andtm_zone
are now available on all platforms.Use the following functions to convert between time representations:
dari
Ke
Gunakan
seconds since the epoch
struct_time
in UTCseconds since the epoch
struct_time
in local timestruct_time
in UTCseconds since the epoch
struct_time
in local timeseconds since the epoch
Fungsi-Fungsi¶
-
time.
asctime
([t])¶ Convert a tuple or
struct_time
representing a time as returned bygmtime()
orlocaltime()
to a string of the following form:'Sun Jun 20 23:21:05 1993'
. The day field is two characters long and is space padded if the day is a single digit, e.g.:'Wed Jun 9 04:26:40 1993'
.If t is not provided, the current time as returned by
localtime()
is used. Locale information is not used byasctime()
.Catatan
Unlike the C function of the same name,
asctime()
does not add a trailing newline.
-
time.
pthread_getcpuclockid
(thread_id)¶ Return the clk_id of the thread-specific CPU-time clock for the specified thread_id.
Use
threading.get_ident()
or theident
attribute ofthreading.Thread
objects to get a suitable value for thread_id.Peringatan
Passing an invalid or expired thread_id may result in undefined behavior, such as segmentation fault.
Availability: Unix (see the man page for pthread_getcpuclockid(3) for further information).
Baru pada versi 3.7.
-
time.
clock_getres
(clk_id)¶ Return the resolution (precision) of the specified clock clk_id. Refer to Clock ID Constants for a list of accepted values for clk_id.
Availability: Unix.
Baru pada versi 3.3.
-
time.
clock_gettime
(clk_id) → float¶ Return the time of the specified clock clk_id. Refer to Clock ID Constants for a list of accepted values for clk_id.
Availability: Unix.
Baru pada versi 3.3.
-
time.
clock_gettime_ns
(clk_id) → int¶ Similar to
clock_gettime()
but return time as nanoseconds.Availability: Unix.
Baru pada versi 3.7.
-
time.
clock_settime
(clk_id, time: float)¶ Set the time of the specified clock clk_id. Currently,
CLOCK_REALTIME
is the only accepted value for clk_id.Availability: Unix.
Baru pada versi 3.3.
-
time.
clock_settime_ns
(clk_id, time: int)¶ Similar to
clock_settime()
but set time with nanoseconds.Availability: Unix.
Baru pada versi 3.7.
-
time.
ctime
([secs])¶ Convert a time expressed in seconds since the epoch to a string of a form:
'Sun Jun 20 23:21:05 1993'
representing local time. The day field is two characters long and is space padded if the day is a single digit, e.g.:'Wed Jun 9 04:26:40 1993'
.If secs is not provided or
None
, the current time as returned bytime()
is used.ctime(secs)
is equivalent toasctime(localtime(secs))
. Locale information is not used byctime()
.
-
time.
get_clock_info
(name)¶ Get information on the specified clock as a namespace object. Supported clock names and the corresponding functions to read their value are:
'monotonic'
:time.monotonic()
'perf_counter'
:time.perf_counter()
'process_time'
:time.process_time()
'thread_time'
:time.thread_time()
'time'
:time.time()
The result has the following attributes:
adjustable:
True
if the clock can be changed automatically (e.g. by a NTP daemon) or manually by the system administrator,False
otherwiseimplementation: The name of the underlying C function used to get the clock value. Refer to Clock ID Constants for possible values.
monotonic:
True
if the clock cannot go backward,False
otherwiseresolution: The resolution of the clock in seconds (
float
)
Baru pada versi 3.3.
-
time.
gmtime
([secs])¶ Convert a time expressed in seconds since the epoch to a
struct_time
in UTC in which the dst flag is always zero. If secs is not provided orNone
, the current time as returned bytime()
is used. Fractions of a second are ignored. See above for a description of thestruct_time
object. Seecalendar.timegm()
for the inverse of this function.
-
time.
localtime
([secs])¶ Like
gmtime()
but converts to local time. If secs is not provided orNone
, the current time as returned bytime()
is used. The dst flag is set to1
when DST applies to the given time.localtime()
may raiseOverflowError
, if the timestamp is outside the range of values supported by the platform Clocaltime()
orgmtime()
functions, andOSError
onlocaltime()
orgmtime()
failure. It's common for this to be restricted to years between 1970 and 2038.
-
time.
mktime
(t)¶ This is the inverse function of
localtime()
. Its argument is thestruct_time
or full 9-tuple (since the dst flag is needed; use-1
as the dst flag if it is unknown) which expresses the time in local time, not UTC. It returns a floating point number, for compatibility withtime()
. If the input value cannot be represented as a valid time, eitherOverflowError
orValueError
will be raised (which depends on whether the invalid value is caught by Python or the underlying C libraries). The earliest date for which it can generate a time is platform-dependent.
-
time.
monotonic
() → float¶ Return the value (in fractional seconds) of a monotonic clock, i.e. a clock that cannot go backwards. The clock is not affected by system clock updates. The reference point of the returned value is undefined, so that only the difference between the results of two calls is valid.
Baru pada versi 3.3.
Berubah pada versi 3.5: The function is now always available and always system-wide.
-
time.
monotonic_ns
() → int¶ Similar to
monotonic()
, but return time as nanoseconds.Baru pada versi 3.7.
-
time.
perf_counter
() → float¶ Return the value (in fractional seconds) of a performance counter, i.e. a clock with the highest available resolution to measure a short duration. It does include time elapsed during sleep and is system-wide. The reference point of the returned value is undefined, so that only the difference between the results of two calls is valid.
Baru pada versi 3.3.
-
time.
perf_counter_ns
() → int¶ Similar to
perf_counter()
, but return time as nanoseconds.Baru pada versi 3.7.
-
time.
process_time
() → float¶ Return the value (in fractional seconds) of the sum of the system and user CPU time of the current process. It does not include time elapsed during sleep. It is process-wide by definition. The reference point of the returned value is undefined, so that only the difference between the results of two calls is valid.
Baru pada versi 3.3.
-
time.
process_time_ns
() → int¶ Similar to
process_time()
but return time as nanoseconds.Baru pada versi 3.7.
-
time.
sleep
(secs)¶ Suspend execution of the calling thread for the given number of seconds. The argument may be a floating point number to indicate a more precise sleep time. The actual suspension time may be less than that requested because any caught signal will terminate the
sleep()
following execution of that signal's catching routine. Also, the suspension time may be longer than requested by an arbitrary amount because of the scheduling of other activity in the system.Berubah pada versi 3.5: The function now sleeps at least secs even if the sleep is interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale).
-
time.
strftime
(format[, t])¶ Convert a tuple or
struct_time
representing a time as returned bygmtime()
orlocaltime()
to a string as specified by the format argument. If t is not provided, the current time as returned bylocaltime()
is used. format must be a string.ValueError
is raised if any field in t is outside of the allowed range.0 is a legal argument for any position in the time tuple; if it is normally illegal the value is forced to a correct one.
The following directives can be embedded in the format string. They are shown without the optional field width and precision specification, and are replaced by the indicated characters in the
strftime()
result:Petunjuk
Artinya
Catatan
%a
Locale's abbreviated weekday name.
%A
Locale's full weekday name.
%b
Locale's abbreviated month name.
%B
Locale's full month name.
%c
Locale's appropriate date and time representation.
%d
Day of the month as a decimal number [01,31].
%H
Hour (24-hour clock) as a decimal number [00,23].
%I
Hour (12-hour clock) as a decimal number [01,12].
%j
Day of the year as a decimal number [001,366].
%m
Month as a decimal number [01,12].
%M
Minute as a decimal number [00,59].
%p
Locale's equivalent of either AM or PM.
(1)
%S
Second as a decimal number [00,61].
(2)
%U
Week number of the year (Sunday as the first day of the week) as a decimal number [00,53]. All days in a new year preceding the first Sunday are considered to be in week 0.
(3)
%w
Weekday as a decimal number [0(Sunday),6].
%W
Week number of the year (Monday as the first day of the week) as a decimal number [00,53]. All days in a new year preceding the first Monday are considered to be in week 0.
(3)
%x
Locale's appropriate date representation.
%X
Locale's appropriate time representation.
%y
Year without century as a decimal number [00,99].
%Y
Year with century as a decimal number.
%z
Time zone offset indicating a positive or negative time difference from UTC/GMT of the form +HHMM or -HHMM, where H represents decimal hour digits and M represents decimal minute digits [-23:59, +23:59].
%Z
Time zone name (no characters if no time zone exists).
%%
A literal
'%'
character.Catatan:
When used with the
strptime()
function, the%p
directive only affects the output hour field if the%I
directive is used to parse the hour.The range really is
0
to61
; value60
is valid in timestamps representing leap seconds and value61
is supported for historical reasons.When used with the
strptime()
function,%U
and%W
are only used in calculations when the day of the week and the year are specified.
Here is an example, a format for dates compatible with that specified in the RFC 2822 Internet email standard. 1
>>> from time import gmtime, strftime >>> strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime()) 'Thu, 28 Jun 2001 14:17:15 +0000'
Additional directives may be supported on certain platforms, but only the ones listed here have a meaning standardized by ANSI C. To see the full set of format codes supported on your platform, consult the strftime(3) documentation.
On some platforms, an optional field width and precision specification can immediately follow the initial
'%'
of a directive in the following order; this is also not portable. The field width is normally 2 except for%j
where it is 3.
-
time.
strptime
(string[, format])¶ Parse a string representing a time according to a format. The return value is a
struct_time
as returned bygmtime()
orlocaltime()
.The format parameter uses the same directives as those used by
strftime()
; it defaults to"%a %b %d %H:%M:%S %Y"
which matches the formatting returned byctime()
. If string cannot be parsed according to format, or if it has excess data after parsing,ValueError
is raised. The default values used to fill in any missing data when more accurate values cannot be inferred are(1900, 1, 1, 0, 0, 0, 0, 1, -1)
. Both string and format must be strings.Sebagai contoh:
>>> import time >>> time.strptime("30 Nov 00", "%d %b %y") time.struct_time(tm_year=2000, tm_mon=11, tm_mday=30, tm_hour=0, tm_min=0, tm_sec=0, tm_wday=3, tm_yday=335, tm_isdst=-1)
Support for the
%Z
directive is based on the values contained intzname
and whetherdaylight
is true. Because of this, it is platform-specific except for recognizing UTC and GMT which are always known (and are considered to be non-daylight savings timezones).Only the directives specified in the documentation are supported. Because
strftime()
is implemented per platform it can sometimes offer more directives than those listed. Butstrptime()
is independent of any platform and thus does not necessarily support all directives available that are not documented as supported.
-
class
time.
struct_time
¶ The type of the time value sequence returned by
gmtime()
,localtime()
, andstrptime()
. It is an object with a named tuple interface: values can be accessed by index and by attribute name. The following values are present:Indeks
Atribut
Nilai
0
tm_year
(for example, 1993)
1
tm_mon
range [1, 12]
2
tm_mday
range [1, 31]
3
tm_hour
range [0, 23]
4
tm_min
range [0, 59]
5
tm_sec
range [0, 61]; see (2) in
strftime()
description6
tm_wday
range [0, 6], Monday is 0
7
tm_yday
range [1, 366]
8
tm_isdst
0, 1 or -1; see below
T/A
tm_zone
abbreviation of timezone name
T/A
tm_gmtoff
offset east of UTC in seconds
Note that unlike the C structure, the month value is a range of [1, 12], not [0, 11].
In calls to
mktime()
,tm_isdst
may be set to 1 when daylight savings time is in effect, and 0 when it is not. A value of -1 indicates that this is not known, and will usually result in the correct state being filled in.When a tuple with an incorrect length is passed to a function expecting a
struct_time
, or having elements of the wrong type, aTypeError
is raised.
-
time.
time
() → float¶ Return the time in seconds since the epoch as a floating point number. The specific date of the epoch and the handling of leap seconds is platform dependent. On Windows and most Unix systems, the epoch is January 1, 1970, 00:00:00 (UTC) and leap seconds are not counted towards the time in seconds since the epoch. This is commonly referred to as Unix time. To find out what the epoch is on a given platform, look at
gmtime(0)
.Note that even though the time is always returned as a floating point number, not all systems provide time with a better precision than 1 second. While this function normally returns non-decreasing values, it can return a lower value than a previous call if the system clock has been set back between the two calls.
The number returned by
time()
may be converted into a more common time format (i.e. year, month, day, hour, etc...) in UTC by passing it togmtime()
function or in local time by passing it to thelocaltime()
function. In both cases astruct_time
object is returned, from which the components of the calendar date may be accessed as attributes.
-
time.
thread_time
() → float¶ Return the value (in fractional seconds) of the sum of the system and user CPU time of the current thread. It does not include time elapsed during sleep. It is thread-specific by definition. The reference point of the returned value is undefined, so that only the difference between the results of two calls in the same thread is valid.
Availability: Windows, Linux, Unix systems supporting
CLOCK_THREAD_CPUTIME_ID
.Baru pada versi 3.7.
-
time.
thread_time_ns
() → int¶ Similar to
thread_time()
but return time as nanoseconds.Baru pada versi 3.7.
-
time.
time_ns
() → int¶ Similar to
time()
but returns time as an integer number of nanoseconds since the epoch.Baru pada versi 3.7.
-
time.
tzset
()¶ Reset the time conversion rules used by the library routines. The environment variable
TZ
specifies how this is done. It will also set the variablestzname
(from theTZ
environment variable),timezone
(non-DST seconds West of UTC),altzone
(DST seconds west of UTC) anddaylight
(to 0 if this timezone does not have any daylight saving time rules, or to nonzero if there is a time, past, present or future when daylight saving time applies).Availability: Unix.
Catatan
Although in many cases, changing the
TZ
environment variable may affect the output of functions likelocaltime()
without callingtzset()
, this behavior should not be relied on.The
TZ
environment variable should contain no whitespace.The standard format of the
TZ
environment variable is (whitespace added for clarity):std offset [dst [offset [,start[/time], end[/time]]]]
Where the components are:
std
anddst
Three or more alphanumerics giving the timezone abbreviations. These will be propagated into time.tzname
offset
The offset has the form:
± hh[:mm[:ss]]
. This indicates the value added the local time to arrive at UTC. If preceded by a '-', the timezone is east of the Prime Meridian; otherwise, it is west. If no offset follows dst, summer time is assumed to be one hour ahead of standard time.start[/time], end[/time]
Indicates when to change to and back from DST. The format of the start and end dates are one of the following:
Jn
The Julian day n (1 <= n <= 365). Leap days are not counted, so in all years February 28 is day 59 and March 1 is day 60.
n
The zero-based Julian day (0 <= n <= 365). Leap days are counted, and it is possible to refer to February 29.
Mm.n.d
The d'th day (0 <= d <= 6) of week n of month m of the year (1 <= n <= 5, 1 <= m <= 12, where week 5 means "the last d day in month m" which may occur in either the fourth or the fifth week). Week 1 is the first week in which the d'th day occurs. Day zero is a Sunday.
time
has the same format asoffset
except that no leading sign ('-' or '+') is allowed. The default, if time is not given, is 02:00:00.
>>> os.environ['TZ'] = 'EST+05EDT,M4.1.0,M10.5.0' >>> time.tzset() >>> time.strftime('%X %x %Z') '02:07:36 05/08/03 EDT' >>> os.environ['TZ'] = 'AEST-10AEDT-11,M10.5.0,M3.5.0' >>> time.tzset() >>> time.strftime('%X %x %Z') '16:08:12 05/08/03 AEST'
On many Unix systems (including *BSD, Linux, Solaris, and Darwin), it is more convenient to use the system's zoneinfo (tzfile(5)) database to specify the timezone rules. To do this, set the
TZ
environment variable to the path of the required timezone datafile, relative to the root of the systems 'zoneinfo' timezone database, usually located at/usr/share/zoneinfo
. For example,'US/Eastern'
,'Australia/Melbourne'
,'Egypt'
or'Europe/Amsterdam'
.>>> os.environ['TZ'] = 'US/Eastern' >>> time.tzset() >>> time.tzname ('EST', 'EDT') >>> os.environ['TZ'] = 'Egypt' >>> time.tzset() >>> time.tzname ('EET', 'EEST')
Clock ID Constants¶
These constants are used as parameters for clock_getres()
and
clock_gettime()
.
-
time.
CLOCK_BOOTTIME
¶ Identical to
CLOCK_MONOTONIC
, except it also includes any time that the system is suspended.This allows applications to get a suspend-aware monotonic clock without having to deal with the complications of
CLOCK_REALTIME
, which may have discontinuities if the time is changed usingsettimeofday()
or similar.Availability: Linux 2.6.39 or later.
Baru pada versi 3.7.
-
time.
CLOCK_HIGHRES
¶ The Solaris OS has a
CLOCK_HIGHRES
timer that attempts to use an optimal hardware source, and may give close to nanosecond resolution.CLOCK_HIGHRES
is the nonadjustable, high-resolution clock.Availability: Solaris.
Baru pada versi 3.3.
-
time.
CLOCK_MONOTONIC
¶ Clock that cannot be set and represents monotonic time since some unspecified starting point.
Availability: Unix.
Baru pada versi 3.3.
-
time.
CLOCK_MONOTONIC_RAW
¶ Similar to
CLOCK_MONOTONIC
, but provides access to a raw hardware-based time that is not subject to NTP adjustments.Availability: Linux 2.6.28 and newer, macOS 10.12 and newer.
Baru pada versi 3.3.
-
time.
CLOCK_PROCESS_CPUTIME_ID
¶ High-resolution per-process timer from the CPU.
Availability: Unix.
Baru pada versi 3.3.
-
time.
CLOCK_PROF
¶ High-resolution per-process timer from the CPU.
Availability: FreeBSD, NetBSD 7 or later, OpenBSD.
Baru pada versi 3.7.
-
time.
CLOCK_THREAD_CPUTIME_ID
¶ Thread-specific CPU-time clock.
Availability: Unix.
Baru pada versi 3.3.
-
time.
CLOCK_UPTIME
¶ Time whose absolute value is the time the system has been running and not suspended, providing accurate uptime measurement, both absolute and interval.
Availability: FreeBSD, OpenBSD 5.5 or later.
Baru pada versi 3.7.
-
time.
CLOCK_UPTIME_RAW
¶ Clock that increments monotonically, tracking the time since an arbitrary point, unaffected by frequency or time adjustments and not incremented while the system is asleep.
Availability: macOS 10.12 and newer.
Baru pada versi 3.8.
The following constant is the only parameter that can be sent to
clock_settime()
.
-
time.
CLOCK_REALTIME
¶ System-wide real-time clock. Setting this clock requires appropriate privileges.
Availability: Unix.
Baru pada versi 3.3.
Timezone Constants¶
-
time.
altzone
¶ The offset of the local DST timezone, in seconds west of UTC, if one is defined. This is negative if the local DST timezone is east of UTC (as in Western Europe, including the UK). Only use this if
daylight
is nonzero. See note below.
-
time.
daylight
¶ Nonzero if a DST timezone is defined. See note below.
-
time.
timezone
¶ The offset of the local (non-DST) timezone, in seconds west of UTC (negative in most of Western Europe, positive in the US, zero in the UK). See note below.
-
time.
tzname
¶ A tuple of two strings: the first is the name of the local non-DST timezone, the second is the name of the local DST timezone. If no DST timezone is defined, the second string should not be used. See note below.
Catatan
For the above Timezone constants (altzone
, daylight
, timezone
,
and tzname
), the value is determined by the timezone rules in effect
at module load time or the last time tzset()
is called and may be incorrect
for times in the past. It is recommended to use the tm_gmtoff
and
tm_zone
results from localtime()
to obtain timezone information.
Lihat juga
- Modul
datetime
More object-oriented interface to dates and times.
- Modul
locale
Internationalization services. The locale setting affects the interpretation of many format specifiers in
strftime()
andstrptime()
.- Modul
calendar
General calendar-related functions.
timegm()
is the inverse ofgmtime()
from this module.
Catatan kaki
- 1
The use of
%Z
is now deprecated, but the%z
escape that expands to the preferred hour/minute offset is not supported by all ANSI C libraries. Also, a strict reading of the original 1982 RFC 822 standard calls for a two-digit year (%y rather than %Y), but practice moved to 4-digit years long before the year 2000. After that, RFC 822 became obsolete and the 4-digit year has been first recommended by RFC 1123 and then mandated by RFC 2822.