select --- Waiting for I/O completion


This module provides access to the select() and poll() functions available in most operating systems, devpoll() available on Solaris and derivatives, epoll() available on Linux 2.5+ and kqueue() available on most BSD. Note that on Windows, it only works for sockets; on other operating systems, it also works for other file types (in particular, on Unix, it works on pipes). It cannot be used on regular files to determine whether a file has grown since it was last read.

Note

The selectors module allows high-level and efficient I/O multiplexing, built upon the select module primitives. Users are encouraged to use the selectors module instead, unless they want precise control over the OS-level primitives used.

Availability: not WASI.

This module does not work or is not available on WebAssembly. See Plateformes WebAssembly for more information.

Le module définit :

exception select.error

A deprecated alias of OSError.

Modifié dans la version 3.3: Following PEP 3151, this class was made an alias of OSError.

select.devpoll()

(Only supported on Solaris and derivatives.) Returns a /dev/poll polling object; see section /dev/poll Polling Objects below for the methods supported by devpoll objects.

devpoll() objects are linked to the number of file descriptors allowed at the time of instantiation. If your program reduces this value, devpoll() will fail. If your program increases this value, devpoll() may return an incomplete list of active file descriptors.

The new file descriptor is non-inheritable.

Ajouté dans la version 3.3.

Modifié dans la version 3.4: Le nouveau descripteur de fichier est maintenant non-héritable.

select.epoll(sizehint=-1, flags=0)

(Only supported on Linux 2.5.44 and newer.) Return an edge polling object, which can be used as Edge or Level Triggered interface for I/O events.

sizehint informs epoll about the expected number of events to be registered. It must be positive, or -1 to use the default. It is only used on older systems where epoll_create1() is not available; otherwise it has no effect (though its value is still checked).

flags is deprecated and completely ignored. However, when supplied, its value must be 0 or select.EPOLL_CLOEXEC, otherwise OSError is raised.

See the Edge and Level Trigger Polling (epoll) Objects section below for the methods supported by epolling objects.

epoll objects support the context management protocol: when used in a with statement, the new file descriptor is automatically closed at the end of the block.

The new file descriptor is non-inheritable.

Modifié dans la version 3.3: Added the flags parameter.

Modifié dans la version 3.4: Support for the with statement was added. The new file descriptor is now non-inheritable.

Obsolète depuis la version 3.4: The flags parameter. select.EPOLL_CLOEXEC is used by default now. Use os.set_inheritable() to make the file descriptor inheritable.

select.poll()

(Not supported by all operating systems.) Returns a polling object, which supports registering and unregistering file descriptors, and then polling them for I/O events; see section Polling Objects below for the methods supported by polling objects.

select.kqueue()

(Only supported on BSD.) Returns a kernel queue object; see section Kqueue Objects below for the methods supported by kqueue objects.

The new file descriptor is non-inheritable.

Modifié dans la version 3.4: Le nouveau descripteur de fichier est maintenant non-héritable.

select.kevent(ident, filter=KQ_FILTER_READ, flags=KQ_EV_ADD, fflags=0, data=0, udata=0)

(Only supported on BSD.) Returns a kernel event object; see section Kevent Objects below for the methods supported by kevent objects.

select.select(rlist, wlist, xlist[, timeout])

This is a straightforward interface to the Unix select() system call. The first three arguments are iterables of 'waitable objects': either integers representing file descriptors or objects with a parameterless method named fileno() returning such an integer:

  • rlist: wait until ready for reading

  • wlist: wait until ready for writing

  • xlist: wait for an "exceptional condition" (see the manual page for what your system considers such a condition)

Empty iterables are allowed, but acceptance of three empty iterables is platform-dependent. (It is known to work on Unix but not on Windows.) The optional timeout argument specifies a time-out as a floating-point number in seconds. When the timeout argument is omitted the function blocks until at least one file descriptor is ready. A time-out value of zero specifies a poll and never blocks.

The return value is a triple of lists of objects that are ready: subsets of the first three arguments. When the time-out is reached without a file descriptor becoming ready, three empty lists are returned.

Among the acceptable object types in the iterables are Python file objects (e.g. sys.stdin, or objects returned by open() or os.popen()), socket objects returned by socket.socket(). You may also define a wrapper class yourself, as long as it has an appropriate fileno() method (that really returns a file descriptor, not just a random integer).

Note

File objects on Windows are not acceptable, but sockets are. On Windows, the underlying select() function is provided by the WinSock library, and does not handle file descriptors that don't originate from WinSock.

Modifié dans la version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale), instead of raising InterruptedError.

select.PIPE_BUF

The minimum number of bytes which can be written without blocking to a pipe when the pipe has been reported as ready for writing by select(), poll() or another interface in this module. This doesn't apply to other kind of file-like objects such as sockets.

This value is guaranteed by POSIX to be at least 512.

Disponibilité : Unix

Ajouté dans la version 3.2.

/dev/poll Polling Objects

Solaris and derivatives have /dev/poll. While select() is O(highest file descriptor) and poll() is O(number of file descriptors), /dev/poll is O(active file descriptors).

/dev/poll behaviour is very close to the standard poll() object.

devpoll.close()

Close the file descriptor of the polling object.

Ajouté dans la version 3.4.

devpoll.closed

True if the polling object is closed.

Ajouté dans la version 3.4.

devpoll.fileno()

Return the file descriptor number of the polling object.

Ajouté dans la version 3.4.

devpoll.register(fd[, eventmask])

Register a file descriptor with the polling object. Future calls to the poll() method will then check whether the file descriptor has any pending I/O events. fd can be either an integer, or an object with a fileno() method that returns an integer. File objects implement fileno(), so they can also be used as the argument.

eventmask is an optional bitmask describing the type of events you want to check for. The constants are the same that with poll() object. The default value is a combination of the constants POLLIN, POLLPRI, and POLLOUT.

Avertissement

Registering a file descriptor that's already registered is not an error, but the result is undefined. The appropriate action is to unregister or modify it first. This is an important difference compared with poll().

devpoll.modify(fd[, eventmask])

This method does an unregister() followed by a register(). It is (a bit) more efficient that doing the same explicitly.

devpoll.unregister(fd)

Remove a file descriptor being tracked by a polling object. Just like the register() method, fd can be an integer or an object with a fileno() method that returns an integer.

Attempting to remove a file descriptor that was never registered is safely ignored.

devpoll.poll([timeout])

Polls the set of registered file descriptors, and returns a possibly empty list containing (fd, event) 2-tuples for the descriptors that have events or errors to report. fd is the file descriptor, and event is a bitmask with bits set for the reported events for that descriptor --- POLLIN for waiting input, POLLOUT to indicate that the descriptor can be written to, and so forth. An empty list indicates that the call timed out and no file descriptors had any events to report. If timeout is given, it specifies the length of time in milliseconds which the system will wait for events before returning. If timeout is omitted, -1, or None, the call will block until there is an event for this poll object.

Modifié dans la version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale), instead of raising InterruptedError.

Edge and Level Trigger Polling (epoll) Objects

https://linux.die.net/man/4/epoll

eventmask

Constante

Signification

EPOLLIN

Available for read

EPOLLOUT

Available for write

EPOLLPRI

Urgent data for read

EPOLLERR

Error condition happened on the assoc. fd

EPOLLHUP

Hang up happened on the assoc. fd

EPOLLET

Set Edge Trigger behavior, the default is Level Trigger behavior

EPOLLONESHOT

Set one-shot behavior. After one event is pulled out, the fd is internally disabled

EPOLLEXCLUSIVE

Wake only one epoll object when the associated fd has an event. The default (if this flag is not set) is to wake all epoll objects polling on a fd.

EPOLLRDHUP

Stream socket peer closed connection or shut down writing half of connection.

EPOLLRDNORM

Equivalent to EPOLLIN

EPOLLRDBAND

Priority data band can be read.

EPOLLWRNORM

Equivalent to EPOLLOUT

EPOLLWRBAND

Priority data may be written.

EPOLLMSG

Ignored.

Ajouté dans la version 3.6: EPOLLEXCLUSIVE was added. It's only supported by Linux Kernel 4.5 or later.

epoll.close()

Close the control file descriptor of the epoll object.

epoll.closed

True if the epoll object is closed.

epoll.fileno()

Return the file descriptor number of the control fd.

epoll.fromfd(fd)

Create an epoll object from a given file descriptor.

epoll.register(fd[, eventmask])

Register a fd descriptor with the epoll object.

epoll.modify(fd, eventmask)

Modify a registered file descriptor.

epoll.unregister(fd)

Remove a registered file descriptor from the epoll object.

Modifié dans la version 3.9: The method no longer ignores the EBADF error.

epoll.poll(timeout=None, maxevents=-1)

Wait for events. timeout in seconds (float)

Modifié dans la version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale), instead of raising InterruptedError.

Polling Objects

The poll() system call, supported on most Unix systems, provides better scalability for network servers that service many, many clients at the same time. poll() scales better because the system call only requires listing the file descriptors of interest, while select() builds a bitmap, turns on bits for the fds of interest, and then afterward the whole bitmap has to be linearly scanned again. select() is O(highest file descriptor), while poll() is O(number of file descriptors).

poll.register(fd[, eventmask])

Register a file descriptor with the polling object. Future calls to the poll() method will then check whether the file descriptor has any pending I/O events. fd can be either an integer, or an object with a fileno() method that returns an integer. File objects implement fileno(), so they can also be used as the argument.

eventmask is an optional bitmask describing the type of events you want to check for, and can be a combination of the constants POLLIN, POLLPRI, and POLLOUT, described in the table below. If not specified, the default value used will check for all 3 types of events.

Constante

Signification

POLLIN

There is data to read

POLLPRI

There is urgent data to read

POLLOUT

Ready for output: writing will not block

POLLERR

Error condition of some sort

POLLHUP

Hung up

POLLRDHUP

Stream socket peer closed connection, or shut down writing half of connection

POLLNVAL

Invalid request: descriptor not open

Registering a file descriptor that's already registered is not an error, and has the same effect as registering the descriptor exactly once.

poll.modify(fd, eventmask)

Modifies an already registered fd. This has the same effect as register(fd, eventmask). Attempting to modify a file descriptor that was never registered causes an OSError exception with errno ENOENT to be raised.

poll.unregister(fd)

Remove a file descriptor being tracked by a polling object. Just like the register() method, fd can be an integer or an object with a fileno() method that returns an integer.

Attempting to remove a file descriptor that was never registered causes a KeyError exception to be raised.

poll.poll([timeout])

Polls the set of registered file descriptors, and returns a possibly empty list containing (fd, event) 2-tuples for the descriptors that have events or errors to report. fd is the file descriptor, and event is a bitmask with bits set for the reported events for that descriptor --- POLLIN for waiting input, POLLOUT to indicate that the descriptor can be written to, and so forth. An empty list indicates that the call timed out and no file descriptors had any events to report. If timeout is given, it specifies the length of time in milliseconds which the system will wait for events before returning. If timeout is omitted, negative, or None, the call will block until there is an event for this poll object.

Modifié dans la version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale), instead of raising InterruptedError.

Kqueue Objects

kqueue.close()

Close the control file descriptor of the kqueue object.

kqueue.closed

True if the kqueue object is closed.

kqueue.fileno()

Return the file descriptor number of the control fd.

kqueue.fromfd(fd)

Create a kqueue object from a given file descriptor.

kqueue.control(changelist, max_events[, timeout]) eventlist

Low level interface to kevent

  • changelist must be an iterable of kevent objects or None

  • max_events must be 0 or a positive integer

  • timeout in seconds (floats possible); the default is None, to wait forever

Modifié dans la version 3.5: The function is now retried with a recomputed timeout when interrupted by a signal, except if the signal handler raises an exception (see PEP 475 for the rationale), instead of raising InterruptedError.

Kevent Objects

https://man.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2

kevent.ident

Value used to identify the event. The interpretation depends on the filter but it's usually the file descriptor. In the constructor ident can either be an int or an object with a fileno() method. kevent stores the integer internally.

kevent.filter

Name of the kernel filter.

Constante

Signification

KQ_FILTER_READ

Takes a descriptor and returns whenever there is data available to read

KQ_FILTER_WRITE

Takes a descriptor and returns whenever there is data available to write

KQ_FILTER_AIO

AIO requests

KQ_FILTER_VNODE

Returns when one or more of the requested events watched in fflag occurs

KQ_FILTER_PROC

Watch for events on a process id

KQ_FILTER_NETDEV

Watch for events on a network device [not available on macOS]

KQ_FILTER_SIGNAL

Returns whenever the watched signal is delivered to the process

KQ_FILTER_TIMER

Establishes an arbitrary timer

kevent.flags

Filter action.

Constante

Signification

KQ_EV_ADD

Adds or modifies an event

KQ_EV_DELETE

Removes an event from the queue

KQ_EV_ENABLE

Permitscontrol() to returns the event

KQ_EV_DISABLE

Disablesevent

KQ_EV_ONESHOT

Removes event after first occurrence

KQ_EV_CLEAR

Reset the state after an event is retrieved

KQ_EV_SYSFLAGS

internal event

KQ_EV_FLAG1

internal event

KQ_EV_EOF

Filter specific EOF condition

KQ_EV_ERROR

See return values

kevent.fflags

Filter specific flags.

KQ_FILTER_READ and KQ_FILTER_WRITE filter flags:

Constante

Signification

KQ_NOTE_LOWAT

low water mark of a socket buffer

KQ_FILTER_VNODE filter flags:

Constante

Signification

KQ_NOTE_DELETE

unlink() was called

KQ_NOTE_WRITE

a write occurred

KQ_NOTE_EXTEND

the file was extended

KQ_NOTE_ATTRIB

an attribute was changed

KQ_NOTE_LINK

the link count has changed

KQ_NOTE_RENAME

the file was renamed

KQ_NOTE_REVOKE

access to the file was revoked

KQ_FILTER_PROC filter flags:

Constante

Signification

KQ_NOTE_EXIT

the process has exited

KQ_NOTE_FORK

the process has called fork()

KQ_NOTE_EXEC

the process has executed a new process

KQ_NOTE_PCTRLMASK

internal filter flag

KQ_NOTE_PDATAMASK

internal filter flag

KQ_NOTE_TRACK

follow a process across fork()

KQ_NOTE_CHILD

returned on the child process for NOTE_TRACK

KQ_NOTE_TRACKERR

unable to attach to a child

KQ_FILTER_NETDEV filter flags (not available on macOS):

Constante

Signification

KQ_NOTE_LINKUP

link is up

KQ_NOTE_LINKDOWN

link is down

KQ_NOTE_LINKINV

link state is invalid

kevent.data

Filter specific data.

kevent.udata

User defined value.