16.2. threading — Higher-level threading interface

Code source: Lib/threading.py


This module constructs higher-level threading interfaces on top of the lower level thread module. See also the mutex and Queue modules.

The dummy_threading module is provided for situations where threading cannot be used because thread is missing.

Note

Starting with Python 2.6, this module provides PEP 8 compliant aliases and properties to replace the camelCase names that were inspired by Java’s threading API. This updated API is compatible with that of the multiprocessing module. However, no schedule has been set for the deprecation of the camelCase names and they remain fully supported in both Python 2.x and 3.x.

Note

Starting with Python 2.5, several Thread methods raise RuntimeError instead of AssertionError if called erroneously.

CPython implementation detail: In CPython, due to the Global Interpreter Lock, only one thread can execute Python code at once (even though certain performance-oriented libraries might overcome this limitation). If you want your application to make better use of the computational resources of multi-core machines, you are advised to use multiprocessing. However, threading is still an appropriate model if you want to run multiple I/O-bound tasks simultaneously.

This module defines the following functions and objects:

threading.active_count()
threading.activeCount()

Renvoie le nombre d’objets Thread actuellement vivants. Le compte renvoyé est égal à la longueur de la liste renvoyée par enumerate().

Modifié dans la version 2.6: Added active_count() spelling.

threading.Condition()

A factory function that returns a new condition variable object. A condition variable allows one or more threads to wait until they are notified by another thread.

See Condition Objects.

threading.current_thread()
threading.currentThread()

Renvoie l’objet Thread courant, correspondant au fil de contrôle de l’appelant. Si le fil de contrôle de l’appelant n’a pas été créé via le module Thread, un objet thread factice aux fonctionnalités limitées est renvoyé.

Modifié dans la version 2.6: Added current_thread() spelling.

threading.enumerate()

Renvoie une liste de tous les objets fil d’exécution Thread actuellement vivants. La liste inclut les fils démons, les fils factices créés par current_thread() et le fil principal. Elle exclut les fils terminés et les fils qui n’ont pas encore été lancés.

threading.Event()

A factory function that returns a new event object. An event manages a flag that can be set to true with the set() method and reset to false with the clear() method. The wait() method blocks until the flag is true.

See Event Objects.

class threading.local

A class that represents thread-local data. Thread-local data are data whose values are thread specific. To manage thread-local data, just create an instance of local (or a subclass) and store attributes on it:

mydata = threading.local()
mydata.x = 1

Les valeurs dans l’instance sont différentes pour des threads différents.

Pour plus de détails et de nombreux exemples, voir la chaîne de documentation du module _threading_local.

Nouveau dans la version 2.4.

threading.Lock()

A factory function that returns a new primitive lock object. Once a thread has acquired it, subsequent attempts to acquire it block, until it is released; any thread may release it.

See Lock Objects.

threading.RLock()

A factory function that returns a new reentrant lock object. A reentrant lock must be released by the thread that acquired it. Once a thread has acquired a reentrant lock, the same thread may acquire it again without blocking; the thread must release it once for each time it has acquired it.

See RLock Objects.

threading.Semaphore([value])

A factory function that returns a new semaphore object. A semaphore manages a counter representing the number of release() calls minus the number of acquire() calls, plus an initial value. The acquire() method blocks if necessary until it can return without making the counter negative. If not given, value defaults to 1.

See Semaphore Objects.

threading.BoundedSemaphore([value])

A factory function that returns a new bounded semaphore object. A bounded semaphore checks to make sure its current value doesn’t exceed its initial value. If it does, ValueError is raised. In most situations semaphores are used to guard resources with limited capacity. If the semaphore is released too many times it’s a sign of a bug. If not given, value defaults to 1.

class threading.Thread

A class that represents a thread of control. This class can be safely subclassed in a limited fashion.

See Objets Threads.

class threading.Timer

A thread that executes a function after a specified interval has passed.

See Timer Objects.

threading.settrace(func)

Attache une fonction de traçage pour tous les fils d’exécution démarrés depuis le module Thread. La fonction func est passée à sys.settrace() pour chaque fil, avant que sa méthode run() soit appelée.

Nouveau dans la version 2.3.

threading.setprofile(func)

Attache une fonction de profilage pour tous les fils d’exécution démarrés depuis le module Threading. La fonction func est passée à sys.setprofile() pour chaque fil, avant que sa méthode run() soit appelée.

Nouveau dans la version 2.3.

threading.stack_size([size])

Return the thread stack size used when creating new threads. The optional size argument specifies the stack size to be used for subsequently created threads, and must be 0 (use platform or configured default) or a positive integer value of at least 32,768 (32 KiB). If size is not specified, 0 is used. If changing the thread stack size is unsupported, a ThreadError is raised. If the specified stack size is invalid, a ValueError is raised and the stack size is unmodified. 32kB is currently the minimum supported stack size value to guarantee sufficient stack space for the interpreter itself. Note that some platforms may have particular restrictions on values for the stack size, such as requiring a minimum stack size > 32kB or requiring allocation in multiples of the system memory page size - platform documentation should be referred to for more information (4kB pages are common; using multiples of 4096 for the stack size is the suggested approach in the absence of more specific information). Availability: Windows, systems with POSIX threads.

Nouveau dans la version 2.5.

exception threading.ThreadError

Raised for various threading-related errors as described below. Note that many interfaces use RuntimeError instead of ThreadError.

Detailed interfaces for the objects are documented below.

La conception de ce module est librement basée sur le modèle des fils d’exécution de Java. Cependant, là où Java fait des verrous et des variables de condition le comportement de base de chaque objet, ils sont des objets séparés en Python. La classe Python Thread prend en charge un sous-ensemble du comportement de la classe Thread de Java ; actuellement, il n’y a aucune priorité, aucun groupe de fils d’exécution, et les fils ne peuvent être détruits, arrêtés, suspendus, repris ni interrompus. Les méthodes statiques de la classe Thread de Java, lorsqu’elles sont implémentées, correspondent à des fonctions au niveau du module.

Toutes les méthodes décrites ci-dessous sont exécutées de manière atomique.

16.2.1. Objets Threads

This class represents an activity that is run in a separate thread of control. There are two ways to specify the activity: by passing a callable object to the constructor, or by overriding the run() method in a subclass. No other methods (except for the constructor) should be overridden in a subclass. In other words, only override the __init__() and run() methods of this class.

Once a thread object is created, its activity must be started by calling the thread’s start() method. This invokes the run() method in a separate thread of control.

Once the thread’s activity is started, the thread is considered “alive”. It stops being alive when its run() method terminates – either normally, or by raising an unhandled exception. The is_alive() method tests whether the thread is alive.

Other threads can call a thread’s join() method. This blocks the calling thread until the thread whose join() method is called is terminated.

A thread has a name. The name can be passed to the constructor, and read or changed through the name attribute.

A thread can be flagged as a « daemon thread ». The significance of this flag is that the entire Python program exits when only daemon threads are left. The initial value is inherited from the creating thread. The flag can be set through the daemon property.

Note

Les fils d’exécution démons sont brusquement terminés à l’arrêt du programme Python. Leurs ressources (fichiers ouverts, transactions de base de données, etc.) peuvent ne pas être libérées correctement. Si vous voulez que vos fils s’arrêtent proprement, faites en sorte qu’ils ne soient pas démoniques et utilisez un mécanisme de signalisation approprié tel qu’un objet évènement Event.

Il y a un objet « fil principal », qui correspond au fil de contrôle initial dans le programme Python. Ce n’est pas un fil démon.

There is the possibility that « dummy thread objects » are created. These are thread objects corresponding to « alien threads », which are threads of control started outside the threading module, such as directly from C code. Dummy thread objects have limited functionality; they are always considered alive and daemonic, and cannot be join()ed. They are never deleted, since it is impossible to detect the termination of alien threads.

class threading.Thread(group=None, target=None, name=None, args=(), kwargs={})

Ce constructeur doit toujours être appelé avec des arguments nommés. Les arguments sont :

group doit être None ; cet argument est réservé pour une extension future lorsqu’une classe ThreadGroup sera implémentée.

target est l’objet appelable qui doit être invoqué par la méthode run(). La valeur par défaut est None, ce qui signifie que rien n’est appelé.

name est le nom du fil d’exécution. Par défaut, un nom unique est construit de la forme « Thread–N » où N est un petit nombre décimal.

args est le tuple d’arguments pour l’invocation de l’objet appelable. La valeur par défaut est ().

kwargs est un dictionnaire d’arguments nommés pour l’invocation de l’objet appelable. La valeur par défaut est {}.

Si la sous-classe réimplémente le constructeur, elle doit s’assurer d’appeler le constructeur de la classe de base (Thread.__init__()) avant de faire autre chose au fil d’exécution.

start()

Lance l’activité du fil d’exécution.

It must be called at most once per thread object. It arranges for the object’s run() method to be invoked in a separate thread of control.

Cette méthode lève une RuntimeError si elle est appelée plus d’une fois sur le même objet fil d’exécution.

run()

Méthode représentant l’activité du fil d’exécution.

You may override this method in a subclass. The standard run() method invokes the callable object passed to the object’s constructor as the target argument, if any, with sequential and keyword arguments taken from the args and kwargs arguments, respectively.

join([timeout])

Wait until the thread terminates. This blocks the calling thread until the thread whose join() method is called terminates – either normally or through an unhandled exception – or until the optional timeout occurs.

When the timeout argument is present and not None, it should be a floating point number specifying a timeout for the operation in seconds (or fractions thereof). As join() always returns None, you must call isAlive() after join() to decide whether a timeout happened – if the thread is still alive, the join() call timed out.

Lorsque l’argument timeout n’est pas présent ou vaut None, l’opération se bloque jusqu’à ce que le fil d’exécution se termine.

A thread can be join()ed many times.

join() raises a RuntimeError if an attempt is made to join the current thread as that would cause a deadlock. It is also an error to join() a thread before it has been started and attempts to do so raises the same exception.

name

Une chaîne de caractères utilisée à des fins d’identification seulement. Elle n’a pas de sémantique. Plusieurs fils d’exécution peuvent porter le même nom. Le nom initial est défini par le constructeur.

Nouveau dans la version 2.6.

getName()
setName()

Pre-2.6 API for name.

ident

The “thread identifier” of this thread or None if the thread has not been started. This is a nonzero integer. See the thread.get_ident() function. Thread identifiers may be recycled when a thread exits and another thread is created. The identifier is available even after the thread has exited.

Nouveau dans la version 2.6.

is_alive()
isAlive()

Renvoie si le fil d’exécution est vivant ou pas.

This method returns True just before the run() method starts until just after the run() method terminates. The module function enumerate() returns a list of all alive threads.

Modifié dans la version 2.6: Added is_alive() spelling.

daemon

A boolean value indicating whether this thread is a daemon thread (True) or not (False). This must be set before start() is called, otherwise RuntimeError is raised. Its initial value is inherited from the creating thread; the main thread is not a daemon thread and therefore all threads created in the main thread default to daemon = False.

Le programme Python se termine lorsqu’il ne reste plus de fils d’exécution non-démons vivants.

Nouveau dans la version 2.6.

isDaemon()
setDaemon()

Pre-2.6 API for daemon.

16.2.2. Lock Objects

A primitive lock is a synchronization primitive that is not owned by a particular thread when locked. In Python, it is currently the lowest level synchronization primitive available, implemented directly by the thread extension module.

A primitive lock is in one of two states, « locked » or « unlocked ». It is created in the unlocked state. It has two basic methods, acquire() and release(). When the state is unlocked, acquire() changes the state to locked and returns immediately. When the state is locked, acquire() blocks until a call to release() in another thread changes it to unlocked, then the acquire() call resets it to locked and returns. The release() method should only be called in the locked state; it changes the state to unlocked and returns immediately. If an attempt is made to release an unlocked lock, a ThreadError will be raised.

When more than one thread is blocked in acquire() waiting for the state to turn to unlocked, only one thread proceeds when a release() call resets the state to unlocked; which one of the waiting threads proceeds is not defined, and may vary across implementations.

All methods are executed atomically.

Lock.acquire([blocking])

Acquiert un verrou, bloquant ou non bloquant.

When invoked with the blocking argument set to True (the default), block until the lock is unlocked, then set it to locked and return True.

When invoked with the blocking argument set to False, do not block. If a call with blocking set to True would block, return False immediately; otherwise, set the lock to locked and return True.

Lock.release()

Libère un verrou.

When the lock is locked, reset it to unlocked, and return. If any other threads are blocked waiting for the lock to become unlocked, allow exactly one of them to proceed.

When invoked on an unlocked lock, a ThreadError is raised.

Il n’y a pas de valeur de retour.

locked()
Return true if the lock is acquired.

16.2.3. RLock Objects

A reentrant lock is a synchronization primitive that may be acquired multiple times by the same thread. Internally, it uses the concepts of « owning thread » and « recursion level » in addition to the locked/unlocked state used by primitive locks. In the locked state, some thread owns the lock; in the unlocked state, no thread owns it.

To lock the lock, a thread calls its acquire() method; this returns once the thread owns the lock. To unlock the lock, a thread calls its release() method. acquire()/release() call pairs may be nested; only the final release() (the release() of the outermost pair) resets the lock to unlocked and allows another thread blocked in acquire() to proceed.

RLock.acquire([blocking=1])

Acquiert un verrou, bloquant ou non bloquant.

When invoked without arguments: if this thread already owns the lock, increment the recursion level by one, and return immediately. Otherwise, if another thread owns the lock, block until the lock is unlocked. Once the lock is unlocked (not owned by any thread), then grab ownership, set the recursion level to one, and return. If more than one thread is blocked waiting until the lock is unlocked, only one at a time will be able to grab ownership of the lock. There is no return value in this case.

When invoked with the blocking argument set to true, do the same thing as when called without arguments, and return true.

When invoked with the blocking argument set to false, do not block. If a call without an argument would block, return false immediately; otherwise, do the same thing as when called without arguments, and return true.

RLock.release()

Release a lock, decrementing the recursion level. If after the decrement it is zero, reset the lock to unlocked (not owned by any thread), and if any other threads are blocked waiting for the lock to become unlocked, allow exactly one of them to proceed. If after the decrement the recursion level is still nonzero, the lock remains locked and owned by the calling thread.

Only call this method when the calling thread owns the lock. A RuntimeError is raised if this method is called when the lock is unlocked.

Il n’y a pas de valeur de retour.

16.2.4. Condition Objects

A condition variable is always associated with some kind of lock; this can be passed in or one will be created by default. (Passing one in is useful when several condition variables must share the same lock.)

A condition variable has acquire() and release() methods that call the corresponding methods of the associated lock. It also has a wait() method, and notify() and notifyAll() methods. These three must only be called when the calling thread has acquired the lock, otherwise a RuntimeError is raised.

The wait() method releases the lock, and then blocks until it is awakened by a notify() or notifyAll() call for the same condition variable in another thread. Once awakened, it re-acquires the lock and returns. It is also possible to specify a timeout.

The notify() method wakes up one of the threads waiting for the condition variable, if any are waiting. The notifyAll() method wakes up all threads waiting for the condition variable.

Note: the notify() and notifyAll() methods don’t release the lock; this means that the thread or threads awakened will not return from their wait() call immediately, but only when the thread that called notify() or notifyAll() finally relinquishes ownership of the lock.

Tip: the typical programming style using condition variables uses the lock to synchronize access to some shared state; threads that are interested in a particular change of state call wait() repeatedly until they see the desired state, while threads that modify the state call notify() or notifyAll() when they change the state in such a way that it could possibly be a desired state for one of the waiters. For example, the following code is a generic producer-consumer situation with unlimited buffer capacity:

# Consume one item
cv.acquire()
while not an_item_is_available():
    cv.wait()
get_an_available_item()
cv.release()

# Produce one item
cv.acquire()
make_an_item_available()
cv.notify()
cv.release()

To choose between notify() and notifyAll(), consider whether one state change can be interesting for only one or several waiting threads. E.g. in a typical producer-consumer situation, adding one item to the buffer only needs to wake up one consumer thread.

class threading.Condition([lock])

If the lock argument is given and not None, it must be a Lock or RLock object, and it is used as the underlying lock. Otherwise, a new RLock object is created and used as the underlying lock.

acquire(*args)

Acquire the underlying lock. This method calls the corresponding method on the underlying lock; the return value is whatever that method returns.

release()

Release the underlying lock. This method calls the corresponding method on the underlying lock; there is no return value.

wait([timeout])

Wait until notified or until a timeout occurs. If the calling thread has not acquired the lock when this method is called, a RuntimeError is raised.

This method releases the underlying lock, and then blocks until it is awakened by a notify() or notifyAll() call for the same condition variable in another thread, or until the optional timeout occurs. Once awakened or timed out, it re-acquires the lock and returns.

When the timeout argument is present and not None, it should be a floating point number specifying a timeout for the operation in seconds (or fractions thereof).

When the underlying lock is an RLock, it is not released using its release() method, since this may not actually unlock the lock when it was acquired multiple times recursively. Instead, an internal interface of the RLock class is used, which really unlocks it even when it has been recursively acquired several times. Another internal interface is then used to restore the recursion level when the lock is reacquired.

notify(n=1)

By default, wake up one thread waiting on this condition, if any. If the calling thread has not acquired the lock when this method is called, a RuntimeError is raised.

This method wakes up at most n of the threads waiting for the condition variable; it is a no-op if no threads are waiting.

The current implementation wakes up exactly n threads, if at least n threads are waiting. However, it’s not safe to rely on this behavior. A future, optimized implementation may occasionally wake up more than n threads.

Note: an awakened thread does not actually return from its wait() call until it can reacquire the lock. Since notify() does not release the lock, its caller should.

notify_all()
notifyAll()

Wake up all threads waiting on this condition. This method acts like notify(), but wakes up all waiting threads instead of one. If the calling thread has not acquired the lock when this method is called, a RuntimeError is raised.

Modifié dans la version 2.6: Added notify_all() spelling.

16.2.5. Semaphore Objects

This is one of the oldest synchronization primitives in the history of computer science, invented by the early Dutch computer scientist Edsger W. Dijkstra (he used P() and V() instead of acquire() and release()).

A semaphore manages an internal counter which is decremented by each acquire() call and incremented by each release() call. The counter can never go below zero; when acquire() finds that it is zero, it blocks, waiting until some other thread calls release().

class threading.Semaphore([value])

The optional argument gives the initial value for the internal counter; it defaults to 1. If the value given is less than 0, ValueError is raised.

acquire([blocking])

Acquire a semaphore.

When invoked without arguments: if the internal counter is larger than zero on entry, decrement it by one and return immediately. If it is zero on entry, block, waiting until some other thread has called release() to make it larger than zero. This is done with proper interlocking so that if multiple acquire() calls are blocked, release() will wake exactly one of them up. The implementation may pick one at random, so the order in which blocked threads are awakened should not be relied on. There is no return value in this case.

When invoked with blocking set to true, do the same thing as when called without arguments, and return true.

When invoked with blocking set to false, do not block. If a call without an argument would block, return false immediately; otherwise, do the same thing as when called without arguments, and return true.

release()

Release a semaphore, incrementing the internal counter by one. When it was zero on entry and another thread is waiting for it to become larger than zero again, wake up that thread.

16.2.5.1. Semaphore Example

Semaphores are often used to guard resources with limited capacity, for example, a database server. In any situation where the size of the resource is fixed, you should use a bounded semaphore. Before spawning any worker threads, your main thread would initialize the semaphore:

maxconnections = 5
...
pool_sema = BoundedSemaphore(value=maxconnections)

Once spawned, worker threads call the semaphore’s acquire and release methods when they need to connect to the server:

pool_sema.acquire()
conn = connectdb()
... use connection ...
conn.close()
pool_sema.release()

The use of a bounded semaphore reduces the chance that a programming error which causes the semaphore to be released more than it’s acquired will go undetected.

16.2.6. Event Objects

This is one of the simplest mechanisms for communication between threads: one thread signals an event and other threads wait for it.

An event object manages an internal flag that can be set to true with the set() method and reset to false with the clear() method. The wait() method blocks until the flag is true.

class threading.Event

The internal flag is initially false.

is_set()
isSet()

Return true if and only if the internal flag is true.

Modifié dans la version 2.6: Added is_set() spelling.

set()

Set the internal flag to true. All threads waiting for it to become true are awakened. Threads that call wait() once the flag is true will not block at all.

clear()

Reset the internal flag to false. Subsequently, threads calling wait() will block until set() is called to set the internal flag to true again.

wait([timeout])

Block until the internal flag is true. If the internal flag is true on entry, return immediately. Otherwise, block until another thread calls set() to set the flag to true, or until the optional timeout occurs.

When the timeout argument is present and not None, it should be a floating point number specifying a timeout for the operation in seconds (or fractions thereof).

This method returns the internal flag on exit, so it will always return True except if a timeout is given and the operation times out.

Modifié dans la version 2.7: Previously, the method always returned None.

16.2.7. Timer Objects

This class represents an action that should be run only after a certain amount of time has passed — a timer. Timer is a subclass of Thread and as such also functions as an example of creating custom threads.

Timers are started, as with threads, by calling their start() method. The timer can be stopped (before its action has begun) by calling the cancel() method. The interval the timer will wait before executing its action may not be exactly the same as the interval specified by the user.

Par exemple :

def hello():
    print "hello, world"

t = Timer(30.0, hello)
t.start()  # after 30 seconds, "hello, world" will be printed
class threading.Timer(interval, function, args=[], kwargs={})

Create a timer that will run function with arguments args and keyword arguments kwargs, after interval seconds have passed.

cancel()

Stop the timer, and cancel the execution of the timer’s action. This will only work if the timer is still in its waiting stage.

16.2.8. Using locks, conditions, and semaphores in the with statement

All of the objects provided by this module that have acquire() and release() methods can be used as context managers for a with statement. The acquire() method will be called when the block is entered, and release() will be called when the block is exited.

Currently, Lock, RLock, Condition, Semaphore, and BoundedSemaphore objects may be used as with statement context managers. For example:

import threading

some_rlock = threading.RLock()

with some_rlock:
    print "some_rlock is locked while this executes"

16.2.9. Importing in threaded code

While the import machinery is thread-safe, there are two key restrictions on threaded imports due to inherent limitations in the way that thread-safety is provided:

  • Firstly, other than in the main module, an import should not have the side effect of spawning a new thread and then waiting for that thread in any way. Failing to abide by this restriction can lead to a deadlock if the spawned thread directly or indirectly attempts to import a module.

  • Secondly, all import attempts must be completed before the interpreter starts shutting itself down. This can be most easily achieved by only performing imports from non-daemon threads created through the threading module. Daemon threads and threads created directly with the thread module will require some other form of synchronization to ensure they do not attempt imports after system shutdown has commenced. Failure to abide by this restriction will lead to intermittent exceptions and crashes during interpreter shutdown (as the late imports attempt to access machinery which is no longer in a valid state).