27.1. bdb
— Debugger framework¶
Source code: Lib/bdb.py
The bdb
module handles basic debugger functions, like setting breakpoints
or managing execution via the debugger.
The following exception is defined:
The bdb
module also defines two classes:
-
class
bdb.
Breakpoint
(self, file, line, temporary=0, cond=None, funcname=None)¶ This class implements temporary breakpoints, ignore counts, disabling and (re-)enabling, and conditionals.
Breakpoints are indexed by number through a list called
bpbynumber
and by(file, line)
pairs throughbplist
. The former points to a single instance of classBreakpoint
. The latter points to a list of such instances since there may be more than one breakpoint per line.When creating a breakpoint, its associated filename should be in canonical form. If a funcname is defined, a breakpoint hit will be counted when the first line of that function is executed. A conditional breakpoint always counts a hit.
Breakpoint
instances have the following methods:-
deleteMe
()¶ Delete the breakpoint from the list associated to a file/line. If it is the last breakpoint in that position, it also deletes the entry for the file/line.
-
enable
()¶ Mark the breakpoint as enabled.
-
disable
()¶ Mark the breakpoint as disabled.
-
bpformat
()¶ Return a string with all the information about the breakpoint, nicely formatted:
- The breakpoint number.
- If it is temporary or not.
- Its file,line position.
- The condition that causes a break.
- If it must be ignored the next N times.
- The breakpoint hit count.
Nuevo en la versión 3.2.
-
bpprint
(out=None)¶ Print the output of
bpformat()
to the file out, or if it isNone
, to standard output.
-
-
class
bdb.
Bdb
(skip=None)¶ The
Bdb
class acts as a generic Python debugger base class.This class takes care of the details of the trace facility; a derived class should implement user interaction. The standard debugger class (
pdb.Pdb
) is an example.The skip argument, if given, must be an iterable of glob-style module name patterns. The debugger will not step into frames that originate in a module that matches one of these patterns. Whether a frame is considered to originate in a certain module is determined by the
__name__
in the frame globals.Nuevo en la versión 3.1: The skip argument.
The following methods of
Bdb
normally don’t need to be overridden.-
canonic
(filename)¶ Auxiliary method for getting a filename in a canonical form, that is, as a case-normalized (on case-insensitive filesystems) absolute path, stripped of surrounding angle brackets.
-
reset
()¶ Set the
botframe
,stopframe
,returnframe
andquitting
attributes with values ready to start debugging.
-
trace_dispatch
(frame, event, arg)¶ This function is installed as the trace function of debugged frames. Its return value is the new trace function (in most cases, that is, itself).
The default implementation decides how to dispatch a frame, depending on the type of event (passed as a string) that is about to be executed. event can be one of the following:
"line"
: A new line of code is going to be executed."call"
: A function is about to be called, or another code block entered."return"
: A function or other code block is about to return."exception"
: An exception has occurred."c_call"
: A C function is about to be called."c_return"
: A C function has returned."c_exception"
: A C function has raised an exception.
For the Python events, specialized functions (see below) are called. For the C events, no action is taken.
The arg parameter depends on the previous event.
See the documentation for
sys.settrace()
for more information on the trace function. For more information on code and frame objects, refer to The standard type hierarchy.
-
dispatch_line
(frame)¶ If the debugger should stop on the current line, invoke the
user_line()
method (which should be overridden in subclasses). Raise aBdbQuit
exception if theBdb.quitting
flag is set (which can be set fromuser_line()
). Return a reference to thetrace_dispatch()
method for further tracing in that scope.
-
dispatch_call
(frame, arg)¶ If the debugger should stop on this function call, invoke the
user_call()
method (which should be overridden in subclasses). Raise aBdbQuit
exception if theBdb.quitting
flag is set (which can be set fromuser_call()
). Return a reference to thetrace_dispatch()
method for further tracing in that scope.
-
dispatch_return
(frame, arg)¶ If the debugger should stop on this function return, invoke the
user_return()
method (which should be overridden in subclasses). Raise aBdbQuit
exception if theBdb.quitting
flag is set (which can be set fromuser_return()
). Return a reference to thetrace_dispatch()
method for further tracing in that scope.
-
dispatch_exception
(frame, arg)¶ If the debugger should stop at this exception, invokes the
user_exception()
method (which should be overridden in subclasses). Raise aBdbQuit
exception if theBdb.quitting
flag is set (which can be set fromuser_exception()
). Return a reference to thetrace_dispatch()
method for further tracing in that scope.
Normally derived classes don’t override the following methods, but they may if they want to redefine the definition of stopping and breakpoints.
-
stop_here
(frame)¶ This method checks if the frame is somewhere below
botframe
in the call stack.botframe
is the frame in which debugging started.
-
break_here
(frame)¶ This method checks if there is a breakpoint in the filename and line belonging to frame or, at least, in the current function. If the breakpoint is a temporary one, this method deletes it.
-
break_anywhere
(frame)¶ This method checks if there is a breakpoint in the filename of the current frame.
Derived classes should override these methods to gain control over debugger operation.
-
user_call
(frame, argument_list)¶ This method is called from
dispatch_call()
when there is the possibility that a break might be necessary anywhere inside the called function.
-
user_line
(frame)¶ This method is called from
dispatch_line()
when eitherstop_here()
orbreak_here()
yieldsTrue
.
-
user_return
(frame, return_value)¶ This method is called from
dispatch_return()
whenstop_here()
yieldsTrue
.
-
user_exception
(frame, exc_info)¶ This method is called from
dispatch_exception()
whenstop_here()
yieldsTrue
.
-
do_clear
(arg)¶ Handle how a breakpoint must be removed when it is a temporary one.
This method must be implemented by derived classes.
Derived classes and clients can call the following methods to affect the stepping state.
-
set_step
()¶ Stop after one line of code.
-
set_next
(frame)¶ Stop on the next line in or below the given frame.
-
set_return
(frame)¶ Stop when returning from the given frame.
-
set_until
(frame)¶ Stop when the line with the line no greater than the current one is reached or when returning from current frame.
-
set_trace
([frame])¶ Start debugging from frame. If frame is not specified, debugging starts from caller’s frame.
-
set_continue
()¶ Stop only at breakpoints or when finished. If there are no breakpoints, set the system trace function to
None
.
-
set_quit
()¶ Set the
quitting
attribute toTrue
. This raisesBdbQuit
in the next call to one of thedispatch_*()
methods.
Derived classes and clients can call the following methods to manipulate breakpoints. These methods return a string containing an error message if something went wrong, or
None
if all is well.-
set_break
(filename, lineno, temporary=0, cond, funcname)¶ Set a new breakpoint. If the lineno line doesn’t exist for the filename passed as argument, return an error message. The filename should be in canonical form, as described in the
canonic()
method.
-
clear_break
(filename, lineno)¶ Delete the breakpoints in filename and lineno. If none were set, an error message is returned.
-
clear_bpbynumber
(arg)¶ Delete the breakpoint which has the index arg in the
Breakpoint.bpbynumber
. If arg is not numeric or out of range, return an error message.
-
clear_all_file_breaks
(filename)¶ Delete all breakpoints in filename. If none were set, an error message is returned.
-
clear_all_breaks
()¶ Delete all existing breakpoints.
-
get_bpbynumber
(arg)¶ Return a breakpoint specified by the given number. If arg is a string, it will be converted to a number. If arg is a non-numeric string, if the given breakpoint never existed or has been deleted, a
ValueError
is raised.Nuevo en la versión 3.2.
-
get_break
(filename, lineno)¶ Check if there is a breakpoint for lineno of filename.
-
get_breaks
(filename, lineno)¶ Return all breakpoints for lineno in filename, or an empty list if none are set.
-
get_file_breaks
(filename)¶ Return all breakpoints in filename, or an empty list if none are set.
-
get_all_breaks
()¶ Return all breakpoints that are set.
Derived classes and clients can call the following methods to get a data structure representing a stack trace.
-
get_stack
(f, t)¶ Get a list of records for a frame and all higher (calling) and lower frames, and the size of the higher part.
-
format_stack_entry
(frame_lineno, lprefix=': ')¶ Return a string with information about a stack entry, identified by a
(frame, lineno)
tuple:- The canonical form of the filename which contains the frame.
- The function name, or
"<lambda>"
. - The input arguments.
- The return value.
- The line of code (if it exists).
The following two methods can be called by clients to use a debugger to debug a statement, given as a string.
-
run
(cmd, globals=None, locals=None)¶ Debug a statement executed via the
exec()
function. globals defaults to__main__.__dict__
, locals defaults to globals.
-
runeval
(expr, globals=None, locals=None)¶ Debug an expression executed via the
eval()
function. globals and locals have the same meaning as inrun()
.
-
runcall
(func, *args, **kwds)¶ Debug a single function call, and return its result.
-
Finally, the module defines the following functions:
-
bdb.
checkfuncname
(b, frame)¶ Check whether we should break here, depending on the way the breakpoint b was set.
If it was set via line number, it checks if
b.line
is the same as the one in the frame also passed as argument. If the breakpoint was set via function name, we have to check we are in the right frame (the right function) and if we are in its first executable line.
-
bdb.
effective
(file, line, frame)¶ Determine if there is an effective (active) breakpoint at this line of code. Return a tuple of the breakpoint and a boolean that indicates if it is ok to delete a temporary breakpoint. Return
(None, None)
if there is no matching breakpoint.