Unicode 物件與編解碼器
**********************


Unicode 物件
============

Since the implementation of **PEP 393** in Python 3.3, Unicode objects
internally use a variety of representations, in order to allow
handling the complete range of Unicode characters while staying memory
efficient.  There are special cases for strings where all code points
are below 128, 256, or 65536; otherwise, code points must be below
1114112 (which is the full Unicode range).

UTF-8 表示法會在需要時建立並快取在 Unicode 物件中。

備註:

  自 Python 3.12 起，已移除 "Py_UNICODE" 表示法，並標示為已棄用的 API
  。更多資訊請參閱 **PEP 623**。


Unicode 型別
------------

這些是 Python 中用於 Unicode 實作的基本 Unicode 物件型別：

PyTypeObject PyUnicode_Type
    * 為 穩定 ABI 的一部分.*

   This instance of "PyTypeObject" represents the Python Unicode type.
   It is exposed to Python code as "str".

PyTypeObject PyUnicodeIter_Type
    * 為 穩定 ABI 的一部分.*

   This instance of "PyTypeObject" represents the Python Unicode
   iterator type. It is used to iterate over Unicode string objects.

type Py_UCS4
type Py_UCS2
type Py_UCS1
    * 為 穩定 ABI 的一部分.*

   These types are typedefs for unsigned integer types wide enough to
   contain characters of 32 bits, 16 bits and 8 bits, respectively.
   When dealing with single Unicode characters, use "Py_UCS4".

   在 3.3 版被加入.

type PyASCIIObject
type PyCompactUnicodeObject
type PyUnicodeObject

   These subtypes of "PyObject" represent a Python Unicode object.  In
   almost all cases, they shouldn't be used directly, since all API
   functions that deal with Unicode objects take and return "PyObject"
   pointers.

   在 3.3 版被加入.

   The structure of a particular object can be determined using the
   following macros. The macros cannot fail; their behavior is
   undefined if their argument is not a Python Unicode object.

   PyUnicode_IS_COMPACT(o)

      True if *o* uses the "PyCompactUnicodeObject" structure.

      在 3.3 版被加入.

   PyUnicode_IS_COMPACT_ASCII(o)

      True if *o* uses the "PyASCIIObject" structure.

      在 3.3 版被加入.

The following APIs are C macros and static inlined functions for fast
checks and access to internal read-only data of Unicode objects:

int PyUnicode_Check(PyObject *obj)

   Return true if the object *obj* is a Unicode object or an instance
   of a Unicode subtype.  This function always succeeds.

int PyUnicode_CheckExact(PyObject *obj)

   Return true if the object *obj* is a Unicode object, but not an
   instance of a subtype.  This function always succeeds.

Py_ssize_t PyUnicode_GET_LENGTH(PyObject *unicode)

   Return the length of the Unicode string, in code points.  *unicode*
   has to be a Unicode object in the "canonical" representation (not
   checked).

   在 3.3 版被加入.

Py_UCS1 *PyUnicode_1BYTE_DATA(PyObject *unicode)
Py_UCS2 *PyUnicode_2BYTE_DATA(PyObject *unicode)
Py_UCS4 *PyUnicode_4BYTE_DATA(PyObject *unicode)

   Return a pointer to the canonical representation cast to UCS1, UCS2
   or UCS4 integer types for direct character access.  No checks are
   performed if the canonical representation has the correct character
   size; use "PyUnicode_KIND()" to select the right function.

   在 3.3 版被加入.

PyUnicode_1BYTE_KIND
PyUnicode_2BYTE_KIND
PyUnicode_4BYTE_KIND

   Return values of the "PyUnicode_KIND()" macro.

   在 3.3 版被加入.

   在 3.12 版的變更: "PyUnicode_WCHAR_KIND" 已被移除。

int PyUnicode_KIND(PyObject *unicode)

   Return one of the PyUnicode kind constants (see above) that
   indicate how many bytes per character this Unicode object uses to
   store its data.  *unicode* has to be a Unicode object in the
   "canonical" representation (not checked).

   在 3.3 版被加入.

void *PyUnicode_DATA(PyObject *unicode)

   Return a void pointer to the raw Unicode buffer.  *unicode* has to
   be a Unicode object in the "canonical" representation (not
   checked).

   在 3.3 版被加入.

void PyUnicode_WRITE(int kind, void *data, Py_ssize_t index, Py_UCS4 value)

   Write the code point *value* to the given zero-based *index* in a
   string.

   The *kind* value and *data* pointer must have been obtained from a
   string using "PyUnicode_KIND()" and "PyUnicode_DATA()"
   respectively. You must hold a reference to that string while
   calling "PyUnicode_WRITE()". All requirements of
   "PyUnicode_WriteChar()" also apply.

   The function performs no checks for any of its requirements, and is
   intended for usage in loops.

   在 3.3 版被加入.

Py_UCS4 PyUnicode_READ(int kind, void *data, Py_ssize_t index)

   Read a code point from a canonical representation *data* (as
   obtained with "PyUnicode_DATA()").  No checks or ready calls are
   performed.

   在 3.3 版被加入.

Py_UCS4 PyUnicode_READ_CHAR(PyObject *unicode, Py_ssize_t index)

   Read a character from a Unicode object *unicode*, which must be in
   the "canonical" representation.  This is less efficient than
   "PyUnicode_READ()" if you do multiple consecutive reads.

   在 3.3 版被加入.

Py_UCS4 PyUnicode_MAX_CHAR_VALUE(PyObject *unicode)

   Return the maximum code point that is suitable for creating another
   string based on *unicode*, which must be in the "canonical"
   representation.  This is always an approximation but more efficient
   than iterating over the string.

   在 3.3 版被加入.

int PyUnicode_IsIdentifier(PyObject *unicode)
    * 為 穩定 ABI 的一部分.*

   Return "1" if the string is a valid identifier according to the
   language definition, section Names (identifiers and keywords).
   Return "0" otherwise.

   在 3.9 版的變更: The function does not call "Py_FatalError()"
   anymore if the string is not ready.

unsigned int PyUnicode_IS_ASCII(PyObject *unicode)

   Return true if the string only contains ASCII characters.
   Equivalent to "str.isascii()".

   在 3.2 版被加入.


Unicode Character Properties
----------------------------

Unicode provides many different character properties. The most often
needed ones are available through these macros which are mapped to C
functions depending on the Python configuration.

int Py_UNICODE_ISSPACE(Py_UCS4 ch)

   根據 *ch* 是否為空白字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISLOWER(Py_UCS4 ch)

   根據 *ch* 是否為小寫字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISUPPER(Py_UCS4 ch)

   根據 *ch* 是否為大寫字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISTITLE(Py_UCS4 ch)

   根據 *ch* 是否為首字大寫字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISLINEBREAK(Py_UCS4 ch)

   根據 *ch* 是否為換行字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISDECIMAL(Py_UCS4 ch)

   根據 *ch* 是否為十進位字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISDIGIT(Py_UCS4 ch)

   根據 *ch* 是否為數字 (digit) 字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISNUMERIC(Py_UCS4 ch)

   根據 *ch* 是否為數值 (numeric) 字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISALPHA(Py_UCS4 ch)

   根據 *ch* 是否為字母字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISALNUM(Py_UCS4 ch)

   根據 *ch* 是否為字母數字 (alphanumeric) 字元來回傳 "1" 或 "0"。

int Py_UNICODE_ISPRINTABLE(Py_UCS4 ch)

   根據 *ch* 是否為可列印字元（如 "str.isprintable()" 所定義）來回傳
   "1" 或 "0"。

這些 API 可用於快速直接字元轉換：

Py_UCS4 Py_UNICODE_TOLOWER(Py_UCS4 ch)

   回傳轉換為小寫的 *ch* 字元。

Py_UCS4 Py_UNICODE_TOUPPER(Py_UCS4 ch)

   回傳轉換為大寫的 *ch* 字元。

Py_UCS4 Py_UNICODE_TOTITLE(Py_UCS4 ch)

   回傳轉換為首字大寫的 *ch* 字元。

int Py_UNICODE_TODECIMAL(Py_UCS4 ch)

   回傳轉換為十進位正整數的 *ch* 字元，若無法轉換則回傳 "-1"。此函式不
   會引發例外。

int Py_UNICODE_TODIGIT(Py_UCS4 ch)

   回傳轉換為單一數字整數的 *ch* 字元，若無法轉換則回傳 "-1"。此函式不
   會引發例外。

double Py_UNICODE_TONUMERIC(Py_UCS4 ch)

   回傳轉換為雙精度浮點數 (double) 的 *ch* 字元，若無法轉換則回傳
   "-1.0"。此函式不會引發例外。

這些 API 可用於處理代理字元：

int Py_UNICODE_IS_SURROGATE(Py_UCS4 ch)

   檢查 *ch* 是否為代理字元 (surrogate, "0xD800 <= ch <= 0xDFFF")。

int Py_UNICODE_IS_HIGH_SURROGATE(Py_UCS4 ch)

   檢查 *ch* 是否為高代理字元 (high surrogate, "0xD800 <= ch <=
   0xDBFF")。

int Py_UNICODE_IS_LOW_SURROGATE(Py_UCS4 ch)

   檢查 *ch* 是否為低代理字元 (low surrogate, "0xDC00 <= ch <=
   0xDFFF")。

Py_UCS4 Py_UNICODE_HIGH_SURROGATE(Py_UCS4 ch)

   Return the high UTF-16 surrogate ("0xD800" to "0xDBFF") for a
   Unicode code point in the range "[0x10000; 0x10FFFF]".

Py_UCS4 Py_UNICODE_LOW_SURROGATE(Py_UCS4 ch)

   Return the low UTF-16 surrogate ("0xDC00" to "0xDFFF") for a
   Unicode code point in the range "[0x10000; 0x10FFFF]".

Py_UCS4 Py_UNICODE_JOIN_SURROGATES(Py_UCS4 high, Py_UCS4 low)

   Join two surrogate code points and return a single "Py_UCS4" value.
   *high* and *low* are respectively the leading and trailing
   surrogates in a surrogate pair. *high* must be in the range
   "[0xD800; 0xDBFF]" and *low* must be in the range "[0xDC00;
   0xDFFF]".


Creating and accessing Unicode strings
--------------------------------------

To create Unicode objects and access their basic sequence properties,
use these APIs:

PyObject *PyUnicode_New(Py_ssize_t size, Py_UCS4 maxchar)
    *回傳值：新的參照。*

   Create a new Unicode object.  *maxchar* should be the true maximum
   code point to be placed in the string.  As an approximation, it can
   be rounded up to the nearest value in the sequence 127, 255, 65535,
   1114111.

   On error, set an exception and return "NULL".

   After creation, the string can be filled by
   "PyUnicode_WriteChar()", "PyUnicode_CopyCharacters()",
   "PyUnicode_Fill()", "PyUnicode_WRITE()" or similar. Since strings
   are supposed to be immutable, take care to not “use” the result
   while it is being modified. In particular, before it's filled with
   its final contents, a string:

   * must not be hashed,

   * must not be "converted to UTF-8", or another non-"canonical"
     representation,

   * must not have its reference count changed,

   * must not be shared with code that might do one of the above.

   This list is not exhaustive. Avoiding these uses is your
   responsibility; Python does not always check these requirements.

   To avoid accidentally exposing a partially-written string object,
   prefer using the "PyUnicodeWriter" API, or one of the
   "PyUnicode_From*" functions below.

   在 3.3 版被加入.

PyObject *PyUnicode_FromKindAndData(int kind, const void *buffer, Py_ssize_t size)
    *回傳值：新的參照。*

   Create a new Unicode object with the given *kind* (possible values
   are "PyUnicode_1BYTE_KIND" etc., as returned by
   "PyUnicode_KIND()").  The *buffer* must point to an array of *size*
   units of 1, 2 or 4 bytes per character, as given by the kind.

   If necessary, the input *buffer* is copied and transformed into the
   canonical representation.  For example, if the *buffer* is a UCS4
   string ("PyUnicode_4BYTE_KIND") and it consists only of codepoints
   in the UCS1 range, it will be transformed into UCS1
   ("PyUnicode_1BYTE_KIND").

   在 3.3 版被加入.

PyObject *PyUnicode_FromStringAndSize(const char *str, Py_ssize_t size)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object from the char buffer *str*.  The bytes will
   be interpreted as being UTF-8 encoded.  The buffer is copied into
   the new object. The return value might be a shared object, i.e.
   modification of the data is not allowed.

   此函式在以下情況下會引發 "SystemError"：

   * *size* < 0，

   * *str* 為 "NULL" 且 *size* > 0

   在 3.12 版的變更: *str* == "NULL" 且 *size* > 0 不再被允許。

PyObject *PyUnicode_FromString(const char *str)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object from a UTF-8 encoded null-terminated char
   buffer *str*.

PyObject *PyUnicode_FromFormat(const char *format, ...)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Take a C "printf()"-style *format* string and a variable number of
   arguments, calculate the size of the resulting Python Unicode
   string and return a string with the values formatted into it.  The
   variable arguments must be C types and must correspond exactly to
   the format characters in the *format* ASCII-encoded string.

   A conversion specifier contains two or more characters and has the
   following components, which must occur in this order:

   1. The "'%'" character, which marks the start of the specifier.

   2. Conversion flags (optional), which affect the result of some
      conversion types.

   3. Minimum field width (optional). If specified as an "'*'"
      (asterisk), the actual width is given in the next argument,
      which must be of type int, and the object to convert comes after
      the minimum field width and optional precision.

   4. Precision (optional), given as a "'.'" (dot) followed by the
      precision. If specified as "'*'" (an asterisk), the actual
      precision is given in the next argument, which must be of type
      int, and the value to convert comes after the precision.

   5. Length modifier (optional).

   6. Conversion type.

   The conversion flag characters are:

   +---------+---------------------------------------------------------------+
   | 旗標    | 含義                                                          |
   |=========|===============================================================|
   | "0"     | The conversion will be zero padded for numeric values.        |
   +---------+---------------------------------------------------------------+
   | "-"     | The converted value is left adjusted (overrides the "0" flag  |
   |         | if both are given).                                           |
   +---------+---------------------------------------------------------------+

   The length modifiers for following integer conversions ("d", "i",
   "o", "u", "x", or "X") specify the type of the argument (int by
   default):

   +------------+-------------------------------------------------------+
   | Modifier   | Types                                                 |
   |============|=======================================================|
   | "l"        | long 或 unsigned long                                 |
   +------------+-------------------------------------------------------+
   | "ll"       | long long 或 unsigned long long                       |
   +------------+-------------------------------------------------------+
   | "j"        | "intmax_t" 或 "uintmax_t"                             |
   +------------+-------------------------------------------------------+
   | "z"        | "size_t" 或 "ssize_t"                                 |
   +------------+-------------------------------------------------------+
   | "t"        | "ptrdiff_t"                                           |
   +------------+-------------------------------------------------------+

   The length modifier "l" for following conversions "s" or "V"
   specify that the type of the argument is const wchar_t*.

   The conversion specifiers are:

   +-----------------------------------+-----------------------------------+-----------------------------------+
   | Conversion Specifier              | Type                              | Comment                           |
   |===================================|===================================|===================================|
   | "%"                               | *n/a*                             | 字面 "%" 字元。                   |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "d", "i"                          | Specified by the length modifier  | 一個有符號 C 整數的十進位表示法。 |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "u"                               | Specified by the length modifier  | 一個無符號 C 整數的十進位表示法。 |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "o"                               | Specified by the length modifier  | 一個無符號 C 整數的八進位表示法。 |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "x"                               | Specified by the length modifier  | 一個無符號 C 整數的十六進位表示法 |
   |                                   |                                   | （小寫）。                        |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "X"                               | Specified by the length modifier  | 一個無符號 C 整數的十六進位表示法 |
   |                                   |                                   | （大寫）。                        |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "c"                               | int                               | 一個單一字元。                    |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "s"                               | const char* 或 const wchar_t*     | 一個以 null 結尾的 C 字元陣列。   |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "p"                               | const void*                       | The hex representation of a C     |
   |                                   |                                   | pointer. Mostly equivalent to     |
   |                                   |                                   | "printf("%p")" except that it is  |
   |                                   |                                   | guaranteed to start with the      |
   |                                   |                                   | literal "0x" regardless of what   |
   |                                   |                                   | the platform's "printf" yields.   |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "A"                               | PyObject*                         | 呼叫 "ascii()" 的結果。           |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "U"                               | PyObject*                         | 一個 Unicode 物件。               |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "V"                               | PyObject*、const char* 或 const   | A Unicode object (which may be    |
   |                                   | wchar_t*                          | "NULL") and a null-terminated C   |
   |                                   |                                   | character array as a second       |
   |                                   |                                   | parameter (which will be used, if |
   |                                   |                                   | the first parameter is "NULL").   |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "S"                               | PyObject*                         | 呼叫 "PyObject_Str()" 的結果。    |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "R"                               | PyObject*                         | 呼叫 "PyObject_Repr()" 的結果。   |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "T"                               | PyObject*                         | Get the fully qualified name of   |
   |                                   |                                   | an object type; call              |
   |                                   |                                   | "PyType_GetFullyQualifiedName()". |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "#T"                              | PyObject*                         | Similar to "T" format, but use a  |
   |                                   |                                   | colon (":") as separator between  |
   |                                   |                                   | the module name and the qualified |
   |                                   |                                   | name.                             |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "N"                               | PyTypeObject*                     | Get the fully qualified name of a |
   |                                   |                                   | type; call                        |
   |                                   |                                   | "PyType_GetFullyQualifiedName()". |
   +-----------------------------------+-----------------------------------+-----------------------------------+
   | "#N"                              | PyTypeObject*                     | Similar to "N" format, but use a  |
   |                                   |                                   | colon (":") as separator between  |
   |                                   |                                   | the module name and the qualified |
   |                                   |                                   | name.                             |
   +-----------------------------------+-----------------------------------+-----------------------------------+

   備註:

     The width formatter unit is number of characters rather than
     bytes. The precision formatter unit is number of bytes or
     "wchar_t" items (if the length modifier "l" is used) for ""%s""
     and ""%V"" (if the "PyObject*" argument is "NULL"), and a number
     of characters for ""%A"", ""%U"", ""%S"", ""%R"" and ""%V"" (if
     the "PyObject*" argument is not "NULL").

   備註:

     Unlike to C "printf()" the "0" flag has effect even when a
     precision is given for integer conversions ("d", "i", "u", "o",
     "x", or "X").

   在 3.2 版的變更: 新增對 ""%lld"" 和 ""%llu"" 的支援。

   在 3.3 版的變更: 新增對 ""%li""、""%lli"" 和 ""%zi"" 的支援。

   在 3.4 版的變更: 新增對 ""%s""、""%A""、""%U""、""%V""、""%S""、
   ""%R"" 的寬度和精確度格式化支援。

   在 3.12 版的變更: Support for conversion specifiers "o" and "X".
   Support for length modifiers "j" and "t". Length modifiers are now
   applied to all integer conversions. Length modifier "l" is now
   applied to conversion specifiers "s" and "V". Support for variable
   width and precision "*". Support for flag "-".An unrecognized
   format character now sets a "SystemError". In previous versions it
   caused all the rest of the format string to be copied as-is to the
   result string, and any extra arguments discarded.

   在 3.13 版的變更: 新增對 "%T"、"%#T"、"%N" 和 "%#N" 格式的支援。

PyObject *PyUnicode_FromFormatV(const char *format, va_list vargs)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Identical to "PyUnicode_FromFormat()" except that it takes exactly
   two arguments.

PyObject *PyUnicode_FromObject(PyObject *obj)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Copy an instance of a Unicode subtype to a new true Unicode object
   if necessary. If *obj* is already a true Unicode object (not a
   subtype), return a new *strong reference* to the object.

   Objects other than Unicode or its subtypes will cause a
   "TypeError".

PyObject *PyUnicode_FromOrdinal(int ordinal)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode Object from the given Unicode code point
   *ordinal*.

   The ordinal must be in "range(0x110000)". A "ValueError" is raised
   in the case it is not.

PyObject *PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Decode an encoded object *obj* to a Unicode object.

   "bytes", "bytearray" and other *bytes-like objects* are decoded
   according to the given *encoding* and using the error handling
   defined by *errors*. Both can be "NULL" to have the interface use
   the default values (see 內建編解碼器 for details).

   All other objects, including Unicode objects, cause a "TypeError"
   to be set.

   The API returns "NULL" if there was an error.  The caller is
   responsible for decref'ing the returned objects.

void PyUnicode_Append(PyObject **p_left, PyObject *right)
    * 為 穩定 ABI 的一部分.*

   Append the string *right* to the end of *p_left*. *p_left* must
   point to a *strong reference* to a Unicode object;
   "PyUnicode_Append()" releases ("steals") this reference.

   於錯誤發生時，將 **p_left* 設為 "NULL" 並設定例外。

   On success, set **p_left* to a new strong reference to the result.

void PyUnicode_AppendAndDel(PyObject **p_left, PyObject *right)
    * 為 穩定 ABI 的一部分.*

   The function is similar to "PyUnicode_Append()", with the only
   difference being that it decrements the reference count of *right*
   by one.

PyObject *PyUnicode_BuildEncodingMap(PyObject *string)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Return a mapping suitable for decoding a custom single-byte
   encoding. Given a Unicode string *string* of up to 256 characters
   representing an encoding table, returns either a compact internal
   mapping object or a dictionary mapping character ordinals to byte
   values. Raises a "TypeError" and return "NULL" on invalid input.

   在 3.2 版被加入.

const char *PyUnicode_GetDefaultEncoding(void)
    * 為 穩定 ABI 的一部分.*

   Return the name of the default string encoding, ""utf-8"". See
   "sys.getdefaultencoding()".

   The returned string does not need to be freed, and is valid until
   interpreter shutdown.

Py_ssize_t PyUnicode_GetLength(PyObject *unicode)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Return the length of the Unicode object, in code points.

   發生錯誤時，設定例外並回傳 "-1"。

   在 3.3 版被加入.

Py_ssize_t PyUnicode_CopyCharacters(PyObject *to, Py_ssize_t to_start, PyObject *from, Py_ssize_t from_start, Py_ssize_t how_many)

   Copy characters from one Unicode object into another.  This
   function performs character conversion when necessary and falls
   back to "memcpy()" if possible.  Returns "-1" and sets an exception
   on error, otherwise returns the number of copied characters.

   The string must not have been “used” yet. See "PyUnicode_New()" for
   details.

   在 3.3 版被加入.

int PyUnicode_Resize(PyObject **unicode, Py_ssize_t length);
    * 為 穩定 ABI 的一部分.*

   Resize a Unicode object **unicode* to the new *length* in code
   points.

   Try to resize the string in place (which is usually faster than
   allocating a new string and copying characters), or create a new
   string.

   **unicode* is modified to point to the new (resized) object and "0"
   is returned on success. Otherwise, "-1" is returned and an
   exception is set, and **unicode* is left untouched.

   The function doesn't check string content, the result may not be a
   string in canonical representation.

Py_ssize_t PyUnicode_Fill(PyObject *unicode, Py_ssize_t start, Py_ssize_t length, Py_UCS4 fill_char)

   Fill a string with a character: write *fill_char* into
   "unicode[start:start+length]".

   Fail if *fill_char* is bigger than the string maximum character, or
   if the string has more than 1 reference.

   The string must not have been “used” yet. See "PyUnicode_New()" for
   details.

   Return the number of written character, or return "-1" and raise an
   exception on error.

   在 3.3 版被加入.

int PyUnicode_WriteChar(PyObject *unicode, Py_ssize_t index, Py_UCS4 character)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Write a *character* to the string *unicode* at the zero-based
   *index*. Return "0" on success, "-1" on error with an exception
   set.

   This function checks that *unicode* is a Unicode object, that the
   index is not out of bounds, and that the object's reference count
   is one. See "PyUnicode_WRITE()" for a version that skips these
   checks, making them your responsibility.

   The string must not have been “used” yet. See "PyUnicode_New()" for
   details.

   在 3.3 版被加入.

Py_UCS4 PyUnicode_ReadChar(PyObject *unicode, Py_ssize_t index)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Read a character from a string.  This function checks that
   *unicode* is a Unicode object and the index is not out of bounds,
   in contrast to "PyUnicode_READ_CHAR()", which performs no error
   checking.

   成功時回傳字元，發生錯誤時設定例外並回傳 "-1"。

   在 3.3 版被加入.

PyObject *PyUnicode_Substring(PyObject *unicode, Py_ssize_t start, Py_ssize_t end)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Return a substring of *unicode*, from character index *start*
   (included) to character index *end* (excluded).  Negative indices
   are not supported. On error, set an exception and return "NULL".

   在 3.3 版被加入.

Py_UCS4 *PyUnicode_AsUCS4(PyObject *unicode, Py_UCS4 *buffer, Py_ssize_t buflen, int copy_null)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Copy the string *unicode* into a UCS4 buffer, including a null
   character, if *copy_null* is set.  Returns "NULL" and sets an
   exception on error (in particular, a "SystemError" if *buflen* is
   smaller than the length of *unicode*).  *buffer* is returned on
   success.

   在 3.3 版被加入.

Py_UCS4 *PyUnicode_AsUCS4Copy(PyObject *unicode)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Copy the string *unicode* into a new UCS4 buffer that is allocated
   using "PyMem_Malloc()".  If this fails, "NULL" is returned with a
   "MemoryError" set.  The returned buffer always has an extra null
   code point appended.

   在 3.3 版被加入.


Locale Encoding
---------------

The current locale encoding can be used to decode text from the
operating system.

PyObject *PyUnicode_DecodeLocaleAndSize(const char *str, Py_ssize_t length, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Decode a string from UTF-8 on Android and VxWorks, or from the
   current locale encoding on other platforms. The supported error
   handlers are ""strict"" and ""surrogateescape"" (**PEP 383**). The
   decoder uses ""strict"" error handler if *errors* is "NULL".  *str*
   must end with a null character but cannot contain embedded null
   characters.

   Use "PyUnicode_DecodeFSDefaultAndSize()" to decode a string from
   the *filesystem encoding and error handler*.

   此函式會忽略 Python UTF-8 模式。

   也參考: "Py_DecodeLocale()" 函式。

   在 3.3 版被加入.

   在 3.7 版的變更: The function now also uses the current locale
   encoding for the "surrogateescape" error handler, except on
   Android. Previously, "Py_DecodeLocale()" was used for the
   "surrogateescape", and the current locale encoding was used for
   "strict".

PyObject *PyUnicode_DecodeLocale(const char *str, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   類似於 "PyUnicode_DecodeLocaleAndSize()"，但使用 "strlen()" 計算字
   串長度。

   在 3.3 版被加入.

PyObject *PyUnicode_EncodeLocale(PyObject *unicode, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Encode a Unicode object to UTF-8 on Android and VxWorks, or to the
   current locale encoding on other platforms. The supported error
   handlers are ""strict"" and ""surrogateescape"" (**PEP 383**). The
   encoder uses ""strict"" error handler if *errors* is "NULL". Return
   a "bytes" object. *unicode* cannot contain embedded null
   characters.

   Use "PyUnicode_EncodeFSDefault()" to encode a string to the
   *filesystem encoding and error handler*.

   此函式會忽略 Python UTF-8 模式。

   也參考: "Py_EncodeLocale()" 函式。

   在 3.3 版被加入.

   在 3.7 版的變更: The function now also uses the current locale
   encoding for the "surrogateescape" error handler, except on
   Android. Previously, "Py_EncodeLocale()" was used for the
   "surrogateescape", and the current locale encoding was used for
   "strict".


檔案系統編碼
------------

Functions encoding to and decoding from the *filesystem encoding and
error handler* (**PEP 383** and **PEP 529**).

To encode file names to "bytes" during argument parsing, the ""O&""
converter should be used, passing "PyUnicode_FSConverter()" as the
conversion function:

int PyUnicode_FSConverter(PyObject *obj, void *result)
    * 為 穩定 ABI 的一部分.*

   PyArg_Parse* converter: encode "str" objects -- obtained directly
   or through the "os.PathLike" interface -- to "bytes" using
   "PyUnicode_EncodeFSDefault()"; "bytes" objects are output as-is.
   *result* must be an address of a C variable of type PyObject* (or
   PyBytesObject*). On success, set the variable to a new *strong
   reference* to a bytes object which must be released when it is no
   longer used and return a non-zero value ("Py_CLEANUP_SUPPORTED").
   Embedded null bytes are not allowed in the result. On failure,
   return "0" with an exception set.

   If *obj* is "NULL", the function releases a strong reference stored
   in the variable referred by *result* and returns "1".

   在 3.1 版被加入.

   在 3.6 版的變更: 接受一個 *path-like object*。

To decode file names to "str" during argument parsing, the ""O&""
converter should be used, passing "PyUnicode_FSDecoder()" as the
conversion function:

int PyUnicode_FSDecoder(PyObject *obj, void *result)
    * 為 穩定 ABI 的一部分.*

   PyArg_Parse* converter: decode "bytes" objects -- obtained either
   directly or indirectly through the "os.PathLike" interface -- to
   "str" using "PyUnicode_DecodeFSDefaultAndSize()"; "str" objects are
   output as-is. *result* must be an address of a C variable of type
   PyObject* (or PyUnicodeObject*). On success, set the variable to a
   new *strong reference* to a Unicode object which must be released
   when it is no longer used and return a non-zero value
   ("Py_CLEANUP_SUPPORTED"). Embedded null characters are not allowed
   in the result. On failure, return "0" with an exception set.

   If *obj* is "NULL", release the strong reference to the object
   referred to by *result* and return "1".

   在 3.2 版被加入.

   在 3.6 版的變更: 接受一個 *path-like object*。

PyObject *PyUnicode_DecodeFSDefaultAndSize(const char *str, Py_ssize_t size)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Decode a string from the *filesystem encoding and error handler*.

   If you need to decode a string from the current locale encoding,
   use "PyUnicode_DecodeLocaleAndSize()".

   也參考: "Py_DecodeLocale()" 函式。

   在 3.6 版的變更: The *filesystem error handler* is now used.

PyObject *PyUnicode_DecodeFSDefault(const char *str)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Decode a null-terminated string from the *filesystem encoding and
   error handler*.

   如果字串長度已知，請使用 "PyUnicode_DecodeFSDefaultAndSize()"。

   在 3.6 版的變更: The *filesystem error handler* is now used.

PyObject *PyUnicode_EncodeFSDefault(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object to the *filesystem encoding and error
   handler*, and return "bytes". Note that the resulting "bytes"
   object can contain null bytes.

   If you need to encode a string to the current locale encoding, use
   "PyUnicode_EncodeLocale()".

   也參考: "Py_EncodeLocale()" 函式。

   在 3.2 版被加入.

   在 3.6 版的變更: The *filesystem error handler* is now used.


wchar_t 支援
------------

對支援 "wchar_t" 的平台提供支援：

PyObject *PyUnicode_FromWideChar(const wchar_t *wstr, Py_ssize_t size)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object from the "wchar_t" buffer *wstr* of the
   given *size*. Passing "-1" as the *size* indicates that the
   function must itself compute the length, using "wcslen()". Return
   "NULL" on failure.

Py_ssize_t PyUnicode_AsWideChar(PyObject *unicode, wchar_t *wstr, Py_ssize_t size)
    * 為 穩定 ABI 的一部分.*

   Copy the Unicode object contents into the "wchar_t" buffer *wstr*.
   At most *size* "wchar_t" characters are copied (excluding a
   possibly trailing null termination character).  Return the number
   of "wchar_t" characters copied or "-1" in case of an error.

   When *wstr* is "NULL", instead return the *size* that would be
   required to store all of *unicode* including a terminating null.

   Note that the resulting wchar_t* string may or may not be null-
   terminated.  It is the responsibility of the caller to make sure
   that the wchar_t* string is null-terminated in case this is
   required by the application. Also, note that the wchar_t* string
   might contain null characters, which would cause the string to be
   truncated when used with most C functions.

wchar_t *PyUnicode_AsWideCharString(PyObject *unicode, Py_ssize_t *size)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Convert the Unicode object to a wide character string. The output
   string always ends with a null character. If *size* is not "NULL",
   write the number of wide characters (excluding the trailing null
   termination character) into **size*. Note that the resulting
   "wchar_t" string might contain null characters, which would cause
   the string to be truncated when used with most C functions. If
   *size* is "NULL" and the wchar_t* string contains null characters a
   "ValueError" is raised.

   Returns a buffer allocated by "PyMem_New" (use "PyMem_Free()" to
   free it) on success. On error, returns "NULL" and **size* is
   undefined. Raises a "MemoryError" if memory allocation is failed.

   在 3.2 版被加入.

   在 3.7 版的變更: Raises a "ValueError" if *size* is "NULL" and the
   wchar_t* string contains null characters.


內建編解碼器
============

Python provides a set of built-in codecs which are written in C for
speed. All of these codecs are directly usable via the following
functions.

Many of the following APIs take two arguments encoding and errors, and
they have the same semantics as the ones of the built-in "str()"
string object constructor.

Setting encoding to "NULL" causes the default encoding to be used
which is UTF-8.  The file system calls should use
"PyUnicode_FSConverter()" for encoding file names. This uses the
*filesystem encoding and error handler* internally.

Error handling is set by errors which may also be set to "NULL"
meaning to use the default handling defined for the codec.  Default
error handling for all built-in codecs is "strict" ("ValueError" is
raised).

The codecs all use a similar interface.  Only deviations from the
following generic ones are documented for simplicity.


泛用編解碼器
------------

The following macro is provided:

Py_UNICODE_REPLACEMENT_CHARACTER

   The Unicode code point "U+FFFD" (replacement character).

   This Unicode character is used as the replacement character during
   decoding if the *errors* argument is set to "replace".

這些是泛用編解碼器的 API：

PyObject *PyUnicode_Decode(const char *str, Py_ssize_t size, const char *encoding, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the encoded
   string *str*. *encoding* and *errors* have the same meaning as the
   parameters of the same name in the "str()" built-in function.  The
   codec to be used is looked up using the Python codec registry.
   Return "NULL" if an exception was raised by the codec.

PyObject *PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object and return the result as Python bytes
   object. *encoding* and *errors* have the same meaning as the
   parameters of the same name in the Unicode "encode()" method. The
   codec to be used is looked up using the Python codec registry.
   Return "NULL" if an exception was raised by the codec.


UTF-8 編解碼器
--------------

這些是 UTF-8 編解碼器的 API：

PyObject *PyUnicode_DecodeUTF8(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the UTF-8
   encoded string *str*. Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeUTF8Stateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   If *consumed* is "NULL", behave like "PyUnicode_DecodeUTF8()". If
   *consumed* is not "NULL", trailing incomplete UTF-8 byte sequences
   will not be treated as an error. Those bytes will not be decoded
   and the number of bytes that have been decoded will be stored in
   *consumed*.

PyObject *PyUnicode_AsUTF8String(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using UTF-8 and return the result as Python
   bytes object.  Error handling is "strict".  Return "NULL" if an
   exception was raised by the codec.

   The function fails if the string contains surrogate code points
   ("U+D800" - "U+DFFF").

const char *PyUnicode_AsUTF8AndSize(PyObject *unicode, Py_ssize_t *size)
    * 為 穩定 ABI 的一部分 自 3.10 版本開始.*

   Return a pointer to the UTF-8 encoding of the Unicode object, and
   store the size of the encoded representation (in bytes) in *size*.
   The *size* argument can be "NULL"; in this case no size will be
   stored.  The returned buffer always has an extra null byte appended
   (not included in *size*), regardless of whether there are any other
   null code points.

   發生錯誤時，設定例外並將 *size* 設為 "-1"（如果不是 NULL），並回傳
   "NULL"。

   The function fails if the string contains surrogate code points
   ("U+D800" - "U+DFFF").

   This caches the UTF-8 representation of the string in the Unicode
   object, and subsequent calls will return a pointer to the same
   buffer.  The caller is not responsible for deallocating the buffer.
   The buffer is deallocated and pointers to it become invalid when
   the Unicode object is garbage collected.

   在 3.3 版被加入.

   在 3.7 版的變更: 回傳型別現在是 "const char *" 而不是 "char *"。

   在 3.10 版的變更: This function is a part of the limited API.

const char *PyUnicode_AsUTF8(PyObject *unicode)

   與 "PyUnicode_AsUTF8AndSize()" 類似，但不儲存大小。

   警告:

     This function does not have any special behavior for null
     characters embedded within *unicode*. As a result, strings
     containing null characters will remain in the returned string,
     which some C functions might interpret as the end of the string,
     leading to truncation. If truncation is an issue, it is
     recommended to use "PyUnicode_AsUTF8AndSize()" instead.

   在 3.3 版被加入.

   在 3.7 版的變更: 回傳型別現在是 "const char *" 而不是 "char *"。


UTF-32 編解碼器
---------------

這些是 UTF-32 編解碼器的 API：

PyObject *PyUnicode_DecodeUTF32(const char *str, Py_ssize_t size, const char *errors, int *byteorder)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Decode *size* bytes from a UTF-32 encoded buffer string and return
   the corresponding Unicode object.  *errors* (if non-"NULL") defines
   the error handling. It defaults to "strict".

   If *byteorder* is non-"NULL", the decoder starts decoding using the
   given byte order:

      *byteorder == -1: little endian
      *byteorder == 0:  native order
      *byteorder == 1:  big endian

   If "*byteorder" is zero, and the first four bytes of the input data
   are a byte order mark (BOM), the decoder switches to this byte
   order and the BOM is not copied into the resulting Unicode string.
   If "*byteorder" is "-1" or "1", any byte order mark is copied to
   the output.

   After completion, **byteorder* is set to the current byte order at
   the end of input data.

   If *byteorder* is "NULL", the codec starts in native order mode.

   如果編解碼器引發例外則回傳 "NULL"。

PyObject *PyUnicode_DecodeUTF32Stateful(const char *str, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   If *consumed* is "NULL", behave like "PyUnicode_DecodeUTF32()". If
   *consumed* is not "NULL", "PyUnicode_DecodeUTF32Stateful()" will
   not treat trailing incomplete UTF-32 byte sequences (such as a
   number of bytes not divisible by four) as an error. Those bytes
   will not be decoded and the number of bytes that have been decoded
   will be stored in *consumed*.

PyObject *PyUnicode_AsUTF32String(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Return a Python byte string using the UTF-32 encoding in native
   byte order. The string always starts with a BOM mark.  Error
   handling is "strict". Return "NULL" if an exception was raised by
   the codec.


UTF-16 編解碼器
---------------

這些是 UTF-16 編解碼器的 API：

PyObject *PyUnicode_DecodeUTF16(const char *str, Py_ssize_t size, const char *errors, int *byteorder)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Decode *size* bytes from a UTF-16 encoded buffer string and return
   the corresponding Unicode object.  *errors* (if non-"NULL") defines
   the error handling. It defaults to "strict".

   If *byteorder* is non-"NULL", the decoder starts decoding using the
   given byte order:

      *byteorder == -1: little endian
      *byteorder == 0:  native order
      *byteorder == 1:  big endian

   If "*byteorder" is zero, and the first two bytes of the input data
   are a byte order mark (BOM), the decoder switches to this byte
   order and the BOM is not copied into the resulting Unicode string.
   If "*byteorder" is "-1" or "1", any byte order mark is copied to
   the output (where it will result in either a "\ufeff" or a "\ufffe"
   character).

   After completion, "*byteorder" is set to the current byte order at
   the end of input data.

   If *byteorder* is "NULL", the codec starts in native order mode.

   如果編解碼器引發例外則回傳 "NULL"。

PyObject *PyUnicode_DecodeUTF16Stateful(const char *str, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   If *consumed* is "NULL", behave like "PyUnicode_DecodeUTF16()". If
   *consumed* is not "NULL", "PyUnicode_DecodeUTF16Stateful()" will
   not treat trailing incomplete UTF-16 byte sequences (such as an odd
   number of bytes or a split surrogate pair) as an error. Those bytes
   will not be decoded and the number of bytes that have been decoded
   will be stored in *consumed*.

PyObject *PyUnicode_AsUTF16String(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Return a Python byte string using the UTF-16 encoding in native
   byte order. The string always starts with a BOM mark.  Error
   handling is "strict". Return "NULL" if an exception was raised by
   the codec.


UTF-7 編解碼器
--------------

這些是 UTF-7 編解碼器的 API：

PyObject *PyUnicode_DecodeUTF7(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the UTF-7
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeUTF7Stateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   If *consumed* is "NULL", behave like "PyUnicode_DecodeUTF7()".  If
   *consumed* is not "NULL", trailing incomplete UTF-7 base-64
   sections will not be treated as an error.  Those bytes will not be
   decoded and the number of bytes that have been decoded will be
   stored in *consumed*.


Unicode-Escape Codecs
---------------------

These are the "Unicode Escape" codec APIs:

PyObject *PyUnicode_DecodeUnicodeEscape(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the Unicode-
   Escape encoded string *str*.  Return "NULL" if an exception was
   raised by the codec.

PyObject *PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using Unicode-Escape and return the result
   as a bytes object.  Error handling is "strict".  Return "NULL" if
   an exception was raised by the codec.


Raw-Unicode-Escape Codecs
-------------------------

These are the "Raw Unicode Escape" codec APIs:

PyObject *PyUnicode_DecodeRawUnicodeEscape(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the Raw-
   Unicode-Escape encoded string *str*.  Return "NULL" if an exception
   was raised by the codec.

PyObject *PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using Raw-Unicode-Escape and return the
   result as a bytes object.  Error handling is "strict".  Return
   "NULL" if an exception was raised by the codec.


Latin-1 編解碼器
----------------

These are the Latin-1 codec APIs: Latin-1 corresponds to the first 256
Unicode ordinals and only these are accepted by the codecs during
encoding.

PyObject *PyUnicode_DecodeLatin1(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the Latin-1
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_AsLatin1String(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using Latin-1 and return the result as
   Python bytes object.  Error handling is "strict".  Return "NULL" if
   an exception was raised by the codec.


ASCII 編解碼器
--------------

These are the ASCII codec APIs.  Only 7-bit ASCII data is accepted.
All other codes generate errors.

PyObject *PyUnicode_DecodeASCII(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the ASCII
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_AsASCIIString(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using ASCII and return the result as Python
   bytes object.  Error handling is "strict".  Return "NULL" if an
   exception was raised by the codec.


Character Map Codecs
--------------------

This codec is special in that it can be used to implement many
different codecs (and this is in fact what was done to obtain most of
the standard codecs included in the "encodings" package). The codec
uses mappings to encode and decode characters.  The mapping objects
provided must support the "__getitem__()" mapping interface;
dictionaries and sequences work well.

這些是對映編解碼器的 API：

PyObject *PyUnicode_DecodeCharmap(const char *str, Py_ssize_t length, PyObject *mapping, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Create a Unicode object by decoding *size* bytes of the encoded
   string *str* using the given *mapping* object.  Return "NULL" if an
   exception was raised by the codec.

   If *mapping* is "NULL", Latin-1 decoding will be applied.  Else
   *mapping* must map bytes ordinals (integers in the range from 0 to
   255) to Unicode strings, integers (which are then interpreted as
   Unicode ordinals) or "None".  Unmapped data bytes -- ones which
   cause a "LookupError", as well as ones which get mapped to "None",
   "0xFFFE" or "'\ufffe'", are treated as undefined mappings and cause
   an error.

PyObject *PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Encode a Unicode object using the given *mapping* object and return
   the result as a bytes object.  Error handling is "strict".  Return
   "NULL" if an exception was raised by the codec.

   The *mapping* object must map Unicode ordinal integers to bytes
   objects, integers in the range from 0 to 255 or "None".  Unmapped
   character ordinals (ones which cause a "LookupError") as well as
   mapped to "None" are treated as "undefined mapping" and cause an
   error.

The following codec API is special in that maps Unicode to Unicode.

PyObject *PyUnicode_Translate(PyObject *unicode, PyObject *table, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Translate a string by applying a character mapping table to it and
   return the resulting Unicode object. Return "NULL" if an exception
   was raised by the codec.

   The mapping table must map Unicode ordinal integers to Unicode
   ordinal integers or "None" (causing deletion of the character).

   Mapping tables need only provide the "__getitem__()" interface;
   dictionaries and sequences work well.  Unmapped character ordinals
   (ones which cause a "LookupError") are left untouched and are
   copied as-is.

   *errors* has the usual meaning for codecs. It may be "NULL" which
   indicates to use the default error handling.


Windows 的 MBCS 編解碼器
------------------------

These are the MBCS codec APIs. They are currently only available on
Windows and use the Win32 MBCS converters to implement the
conversions.  Note that MBCS (or DBCS) is a class of encodings, not
just one.  The target encoding is defined by the user settings on the
machine running the codec.

PyObject *PyUnicode_DecodeMBCS(const char *str, Py_ssize_t size, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 on Windows 自 3.7 版本
   開始.*

   Create a Unicode object by decoding *size* bytes of the MBCS
   encoded string *str*. Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeMBCSStateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 on Windows 自 3.7 版本
   開始.*

   If *consumed* is "NULL", behave like "PyUnicode_DecodeMBCS()". If
   *consumed* is not "NULL", "PyUnicode_DecodeMBCSStateful()" will not
   decode trailing lead byte and the number of bytes that have been
   decoded will be stored in *consumed*.

PyObject *PyUnicode_DecodeCodePageStateful(int code_page, const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 on Windows 自 3.7 版本
   開始.*

   Similar to "PyUnicode_DecodeMBCSStateful()", except uses the code
   page specified by *code_page*.

PyObject *PyUnicode_AsMBCSString(PyObject *unicode)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 on Windows 自 3.7 版本
   開始.*

   Encode a Unicode object using MBCS and return the result as Python
   bytes object.  Error handling is "strict".  Return "NULL" if an
   exception was raised by the codec.

PyObject *PyUnicode_EncodeCodePage(int code_page, PyObject *unicode, const char *errors)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分 on Windows 自 3.7 版本
   開始.*

   Encode the Unicode object using the specified code page and return
   a Python bytes object.  Return "NULL" if an exception was raised by
   the codec. Use "CP_ACP" code page to get the MBCS encoder.

   在 3.3 版被加入.


Methods and Slot Functions
==========================

The following APIs are capable of handling Unicode objects and strings
on input (we refer to them as strings in the descriptions) and return
Unicode objects or integers as appropriate.

如果發生例外，則回傳 "NULL" 或 "-1"。

PyObject *PyUnicode_Concat(PyObject *left, PyObject *right)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Concat two strings giving a new Unicode string.

PyObject *PyUnicode_Split(PyObject *unicode, PyObject *sep, Py_ssize_t maxsplit)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Split a string giving a list of Unicode strings.  If *sep* is
   "NULL", splitting will be done at all whitespace substrings.
   Otherwise, splits occur at the given separator.  At most *maxsplit*
   splits will be done.  If negative, no limit is set.  Separators are
   not included in the resulting list.

   於錯誤發生時回傳 "NULL" 並設定例外。

   等價於 "str.split()"。

PyObject *PyUnicode_RSplit(PyObject *unicode, PyObject *sep, Py_ssize_t maxsplit)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Similar to "PyUnicode_Split()", but splitting will be done
   beginning at the end of the string.

   於錯誤發生時回傳 "NULL" 並設定例外。

   等價於 "str.rsplit()"。

PyObject *PyUnicode_Splitlines(PyObject *unicode, int keepends)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Split a Unicode string at line breaks, returning a list of Unicode
   strings. CRLF is considered to be one line break.  If *keepends* is
   "0", the Line break characters are not included in the resulting
   strings.

PyObject *PyUnicode_Partition(PyObject *unicode, PyObject *sep)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Split a Unicode string at the first occurrence of *sep*, and return
   a 3-tuple containing the part before the separator, the separator
   itself, and the part after the separator. If the separator is not
   found, return a 3-tuple containing the string itself, followed by
   two empty strings.

   *sep* 不得為空。

   於錯誤發生時回傳 "NULL" 並設定例外。

   等價於 "str.partition()"。

PyObject *PyUnicode_RPartition(PyObject *unicode, PyObject *sep)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Similar to "PyUnicode_Partition()", but split a Unicode string at
   the last occurrence of *sep*. If the separator is not found, return
   a 3-tuple containing two empty strings, followed by the string
   itself.

   *sep* 不得為空。

   於錯誤發生時回傳 "NULL" 並設定例外。

   等價於 "str.rpartition()"。

PyObject *PyUnicode_Join(PyObject *separator, PyObject *seq)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Join a sequence of strings using the given *separator* and return
   the resulting Unicode string.

Py_ssize_t PyUnicode_Tailmatch(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
    * 為 穩定 ABI 的一部分.*

   Return "1" if *substr* matches "unicode[start:end]" at the given
   tail end (*direction* == "-1" means to do a prefix match,
   *direction* == "1" a suffix match), "0" otherwise. Return "-1" if
   an error occurred.

Py_ssize_t PyUnicode_Find(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
    * 為 穩定 ABI 的一部分.*

   Return the first position of *substr* in "unicode[start:end]" using
   the given *direction* (*direction* == "1" means to do a forward
   search, *direction* == "-1" a backward search).  The return value
   is the index of the first match; a value of "-1" indicates that no
   match was found, and "-2" indicates that an error occurred and an
   exception has been set.

Py_ssize_t PyUnicode_FindChar(PyObject *unicode, Py_UCS4 ch, Py_ssize_t start, Py_ssize_t end, int direction)
    * 為 穩定 ABI 的一部分 自 3.7 版本開始.*

   Return the first position of the character *ch* in
   "unicode[start:end]" using the given *direction* (*direction* ==
   "1" means to do a forward search, *direction* == "-1" a backward
   search).  The return value is the index of the first match; a value
   of "-1" indicates that no match was found, and "-2" indicates that
   an error occurred and an exception has been set.

   在 3.3 版被加入.

   在 3.7 版的變更: *start* and *end* are now adjusted to behave like
   "unicode[start:end]".

Py_ssize_t PyUnicode_Count(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end)
    * 為 穩定 ABI 的一部分.*

   Return the number of non-overlapping occurrences of *substr* in
   "unicode[start:end]".  Return "-1" if an error occurred.

PyObject *PyUnicode_Replace(PyObject *unicode, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Replace at most *maxcount* occurrences of *substr* in *unicode*
   with *replstr* and return the resulting Unicode object. *maxcount*
   == "-1" means replace all occurrences.

int PyUnicode_Compare(PyObject *left, PyObject *right)
    * 為 穩定 ABI 的一部分.*

   Compare two strings and return "-1", "0", "1" for less than, equal,
   and greater than, respectively.

   This function returns "-1" upon failure, so one should call
   "PyErr_Occurred()" to check for errors.

   也參考: "PyUnicode_Equal()" 函式。

int PyUnicode_Equal(PyObject *a, PyObject *b)
    * 為 穩定 ABI 的一部分 自 3.14 版本開始.*

   測試兩個字串是否相等：

   * 如果 *a* 等於 *b*，則回傳 "1"。

   * 如果 *a* 不等於 *b*，則回傳 "0"。

   * Set a "TypeError" exception and return "-1" if *a* or *b* is not
     a "str" object.

   The function always succeeds if *a* and *b* are "str" objects.

   The function works for "str" subclasses, but does not honor custom
   "__eq__()" method.

   也參考: "PyUnicode_Compare()" 函式。

   在 3.14 版被加入.

int PyUnicode_EqualToUTF8AndSize(PyObject *unicode, const char *string, Py_ssize_t size)
    * 為 穩定 ABI 的一部分 自 3.13 版本開始.*

   Compare a Unicode object with a char buffer which is interpreted as
   being UTF-8 or ASCII encoded and return true ("1") if they are
   equal, or false ("0") otherwise. If the Unicode object contains
   surrogate code points ("U+D800" - "U+DFFF") or the C string is not
   valid UTF-8, false ("0") is returned.

   此函式不會引發例外。

   在 3.13 版被加入.

int PyUnicode_EqualToUTF8(PyObject *unicode, const char *string)
    * 為 穩定 ABI 的一部分 自 3.13 版本開始.*

   Similar to "PyUnicode_EqualToUTF8AndSize()", but compute *string*
   length using "strlen()". If the Unicode object contains null
   characters, false ("0") is returned.

   在 3.13 版被加入.

int PyUnicode_CompareWithASCIIString(PyObject *unicode, const char *string)
    * 為 穩定 ABI 的一部分.*

   Compare a Unicode object, *unicode*, with *string* and return "-1",
   "0", "1" for less than, equal, and greater than, respectively. It
   is best to pass only ASCII-encoded strings, but the function
   interprets the input string as ISO-8859-1 if it contains non-ASCII
   characters.

   此函式不會引發例外。

PyObject *PyUnicode_RichCompare(PyObject *left, PyObject *right, int op)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Rich compare two Unicode strings and return one of the following:

   * "NULL" in case an exception was raised

   * "Py_True" or "Py_False" for successful comparisons

   * "Py_NotImplemented" in case the type combination is unknown

   Possible values for *op* are "Py_GT", "Py_GE", "Py_EQ", "Py_NE",
   "Py_LT", and "Py_LE".

PyObject *PyUnicode_Format(PyObject *format, PyObject *args)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   Return a new string object from *format* and *args*; this is
   analogous to "format % args".

int PyUnicode_Contains(PyObject *unicode, PyObject *substr)
    * 為 穩定 ABI 的一部分.*

   Check whether *substr* is contained in *unicode* and return true or
   false accordingly.

   *substr* has to coerce to a one element Unicode string. "-1" is
   returned if there was an error.

void PyUnicode_InternInPlace(PyObject **p_unicode)
    * 為 穩定 ABI 的一部分.*

   Intern the argument *p_unicode in place.  The argument must be the
   address of a pointer variable pointing to a Python Unicode string
   object.  If there is an existing interned string that is the same
   as *p_unicode, it sets *p_unicode to it (releasing the reference to
   the old string object and creating a new *strong reference* to the
   interned string object), otherwise it leaves *p_unicode alone and
   interns it.

   (Clarification: even though there is a lot of talk about
   references, think of this function as reference-neutral. You must
   own the object you pass in; after the call you no longer own the
   passed-in reference, but you newly own the result.)

   This function never raises an exception. On error, it leaves its
   argument unchanged without interning it.

   Instances of subclasses of "str" may not be interned, that is,
   PyUnicode_CheckExact(*p_unicode) must be true. If it is not, then
   -- as with any other error -- the argument is left unchanged.

   Note that interned strings are not “immortal”. You must keep a
   reference to the result to benefit from interning.

PyObject *PyUnicode_InternFromString(const char *str)
    *回傳值：新的參照。** 為 穩定 ABI 的一部分.*

   A combination of "PyUnicode_FromString()" and
   "PyUnicode_InternInPlace()", meant for statically allocated
   strings.

   Return a new ("owned") reference to either a new Unicode string
   object that has been interned, or an earlier interned string object
   with the same value.

   Python may keep a reference to the result, or make it *immortal*,
   preventing it from being garbage-collected promptly. For interning
   an unbounded number of different strings, such as ones coming from
   user input, prefer calling "PyUnicode_FromString()" and
   "PyUnicode_InternInPlace()" directly.

unsigned int PyUnicode_CHECK_INTERNED(PyObject *str)

   Return a non-zero value if *str* is interned, zero if not. The
   *str* argument must be a string; this is not checked. This function
   always succeeds.

   **CPython 實作細節：** A non-zero return value may carry additional
   information about *how* the string is interned. The meaning of such
   non-zero values, as well as each specific string's intern-related
   details, may change between CPython versions.


PyUnicodeWriter
===============

The "PyUnicodeWriter" API can be used to create a Python "str" object.

在 3.14 版被加入.

type PyUnicodeWriter

   一個 Unicode 寫入器實例。

   The instance must be destroyed by "PyUnicodeWriter_Finish()" on
   success, or "PyUnicodeWriter_Discard()" on error.

PyUnicodeWriter *PyUnicodeWriter_Create(Py_ssize_t length)

   Create a Unicode writer instance.

   *length* must be greater than or equal to "0".

   If *length* is greater than "0", preallocate an internal buffer of
   *length* characters.

   發生錯誤時，設定例外並回傳 "NULL"。

PyObject *PyUnicodeWriter_Finish(PyUnicodeWriter *writer)

   Return the final Python "str" object and destroy the writer
   instance.

   發生錯誤時，設定例外並回傳 "NULL"。

   The writer instance is invalid after this call.

void PyUnicodeWriter_Discard(PyUnicodeWriter *writer)

   Discard the internal Unicode buffer and destroy the writer
   instance.

   If *writer* is "NULL", no operation is performed.

   The writer instance is invalid after this call.

int PyUnicodeWriter_WriteChar(PyUnicodeWriter *writer, Py_UCS4 ch)

   Write the single Unicode character *ch* into *writer*.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_WriteUTF8(PyUnicodeWriter *writer, const char *str, Py_ssize_t size)

   Decode the string *str* from UTF-8 in strict mode and write the
   output into *writer*.

   *size* is the string length in bytes. If *size* is equal to "-1",
   call "strlen(str)" to get the string length.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

   另請參閱 "PyUnicodeWriter_DecodeUTF8Stateful()"。

int PyUnicodeWriter_WriteASCII(PyUnicodeWriter *writer, const char *str, Py_ssize_t size)

   Write the ASCII string *str* into *writer*.

   *size* is the string length in bytes. If *size* is equal to "-1",
   call "strlen(str)" to get the string length.

   *str* must only contain ASCII characters. The behavior is undefined
   if *str* contains non-ASCII characters.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

   在 3.14 版被加入.

int PyUnicodeWriter_WriteWideChar(PyUnicodeWriter *writer, const wchar_t *str, Py_ssize_t size)

   Write the wide string *str* into *writer*.

   *size* is a number of wide characters. If *size* is equal to "-1",
   call "wcslen(str)" to get the string length.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_WriteUCS4(PyUnicodeWriter *writer, Py_UCS4 *str, Py_ssize_t size)

   Writer the UCS4 string *str* into *writer*.

   *size* 是 UCS4 字元的數量。

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_WriteStr(PyUnicodeWriter *writer, PyObject *obj)

   於 *obj* 上呼叫 "PyObject_Str()" 並將輸出寫入 *writer*。

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_WriteRepr(PyUnicodeWriter *writer, PyObject *obj)

   於 *obj* 上呼叫 "PyObject_Repr()" 並將輸出寫入 *writer*。

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_WriteSubstring(PyUnicodeWriter *writer, PyObject *str, Py_ssize_t start, Py_ssize_t end)

   Write the substring "str[start:end]" into *writer*.

   *str* must be Python "str" object. *start* must be greater than or
   equal to 0, and less than or equal to *end*. *end* must be less
   than or equal to *str* length.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_Format(PyUnicodeWriter *writer, const char *format, ...)

   類似於 "PyUnicode_FromFormat()"，但是直接將輸出寫入 *writer*。

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

int PyUnicodeWriter_DecodeUTF8Stateful(PyUnicodeWriter *writer, const char *string, Py_ssize_t length, const char *errors, Py_ssize_t *consumed)

   Decode the string *str* from UTF-8 with *errors* error handler and
   write the output into *writer*.

   *size* is the string length in bytes. If *size* is equal to "-1",
   call "strlen(str)" to get the string length.

   *errors* is an error handler name, such as ""replace"". If *errors*
   is "NULL", use the strict error handler.

   If *consumed* is not "NULL", set **consumed* to the number of
   decoded bytes on success. If *consumed* is "NULL", treat trailing
   incomplete UTF-8 byte sequences as an error.

   成功時回傳 "0"，發生錯誤時設定例外、保持寫入器不變，並回傳 "-1"。

   另請參閱 "PyUnicodeWriter_WriteUTF8()"。


已棄用的 API
============

以下 API 已棄用。

type Py_UNICODE

   This is a typedef of "wchar_t", which is a 16-bit type or 32-bit
   type depending on the platform. Please use "wchar_t" directly
   instead.

   在 3.3 版的變更: In previous versions, this was a 16-bit type or a
   32-bit type depending on whether you selected a "narrow" or "wide"
   Unicode version of Python at build time.

   自從版本 3.13 後不推薦使用，將會自版本 3.15 中移除。.

int PyUnicode_READY(PyObject *unicode)

   Do nothing and return "0". This API is kept only for backward
   compatibility, but there are no plans to remove it.

   在 3.3 版被加入.

   在 3.10 版之後被棄用: This API does nothing since Python 3.12.
   Previously, this needed to be called for each string created using
   the old API ("PyUnicode_FromUnicode()" or similar).

unsigned int PyUnicode_IS_READY(PyObject *unicode)

   Do nothing and return "1". This API is kept only for backward
   compatibility, but there are no plans to remove it.

   在 3.3 版被加入.

   在 3.14 版之後被棄用: This API does nothing since Python 3.12.
   Previously, this could be called to check if "PyUnicode_READY()" is
   necessary.
