# `signal` --- 设置异步事件处理程序

该模块提供了在 Python 中使用信号处理程序的机制。

## 一般规则

`signal.signal()` 函数允许定义在接收到信号时执行的自定义处理程序。少量的默认处理程序已经设置： `SIGPIPE` 被忽略（因此管道和套接字上的写入错误可以报告为普通的 Python 异常）以及如果父进程没有更改 `SIGINT` ，则其会被翻译成 `KeyboardInterrupt` 异常。

一旦设置，特定信号的处理程序将保持安装，直到它被显式重置（ Python 模拟 BSD 样式接口而不管底层实现），但 `SIGCHLD` 的处理程序除外，它遵循底层实现。

### 执行 Python 信号处理程序

Python 信号处理程序不会在低级（ C ）信号处理程序中执行。相反，低级信号处理程序设置一个标志，告诉 virtual machine 稍后执行相应的 Python 信号处理程序（例如在下一个 bytecode 指令）。这会导致：

- 捕获同步错误是没有意义的，例如 `SIGFPE` 或 `SIGSEGV` ，它们是由 C 代码中的无效操作引起的。Python 将从信号处理程序返回到 C 代码，这可能会再次引发相同的信号，导致 Python 显然的挂起。 从Python 3.3开始，你可以使用 `faulthandler` 模块来报告同步错误。

- 纯 C 中实现的长时间运行的计算（例如在大量文本上的正则表达式匹配）可以在任意时间内不间断地运行，而不管接收到任何信号。计算完成后将调用 Python 信号处理程序。

### 信号与线程

Python signal handlers are always executed in the main Python thread of the main interpreter, even if the signal was received in another thread. This means that signals can't be used as a means of inter-thread communication. You can use the synchronization primitives from the `threading` module instead.

Besides, only the main thread of the main interpreter is allowed to set a new signal handler.

## 模块内容

3.5 版更變: 信号（ SIG* ），处理程序（ `SIG_DFL` ， `SIG_IGN`）和 sigmask（ `SIG_BLOCK` ， `SIG_UNBLOCK` ， `SIG_SETMASK` ）下面列出的相关常量变成了 `enums` 。 `getsignal()` ， `pthread_sigmask()` ， `sigpending()` 和 `sigwait()` 函数返回人类可读的 `enums` 。

在 `signal` 模块中定义的变量是：

`signal.``SIG_DFL`

  这是两种标准信号处理选项之一；它只会执行信号的默认函数。 例如，在大多数系统上，对于 `SIGQUIT` 的默认操作是转储核心并退出，而对于 `SIGCHLD` 的默认操作是简单地忽略它。

`signal.``SIG_IGN`

  这是另一个标准信号处理程序，它将简单地忽略给定的信号。

`signal.``SIGABRT`

  Abort signal from abort(3).

`signal.``SIGALRM`

  Timer signal from alarm(2).

  Availability: Unix.

`signal.``SIGBREAK`

  Interrupt from keyboard (CTRL + BREAK).

  可用性: Windows。

`signal.``SIGBUS`

  Bus error (bad memory access).

  Availability: Unix.

`signal.``SIGCHLD`

  Child process stopped or terminated.

  可用性: Windows。

`signal.``SIGCLD`

  Alias to `SIGCHLD`.

`signal.``SIGCONT`

  Continue the process if it is currently stopped

  Availability: Unix.

`signal.``SIGFPE`

  Floating-point exception. For example, division by zero.

  也參考

  `ZeroDivisionError` is raised when the second argument of a division or modulo operation is zero.

`signal.``SIGHUP`

  Hangup detected on controlling terminal or death of controlling process.

  Availability: Unix.

`signal.``SIGILL`

  Illegal instruction.

`signal.``SIGINT`

  Interrupt from keyboard (CTRL + C).

  Default action is to raise `KeyboardInterrupt`.

`signal.``SIGKILL`

  Kill signal.

  It cannot be caught, blocked, or ignored.

  Availability: Unix.

`signal.``SIGPIPE`

  Broken pipe: write to pipe with no readers.

  Default action is to ignore the signal.

  Availability: Unix.

`signal.``SIGSEGV`

  Segmentation fault: invalid memory reference.

`signal.``SIGTERM`

  Termination signal.

`signal.``SIGUSR1`

  User-defined signal 1.

  Availability: Unix.

`signal.``SIGUSR2`

  User-defined signal 2.

  Availability: Unix.

`signal.``SIGWINCH`

  Window resize signal.

  Availability: Unix.

`SIG*`

  All the signal numbers are defined symbolically. For example, the hangup signal is defined as `signal.SIGHUP`; the variable names are identical to the names used in C programs, as found in `<signal.h>`. The Unix man page for '`signal()`' lists the existing signals (on some systems this is signal(2), on others the list is in signal(7)). Note that not all systems define the same set of signal names; only those names defined by the system are defined by this module.

`signal.``CTRL_C_EVENT`

  对应于 `Ctrl+C` 击键事件的信号。此信号只能用于 `os.kill()` 。

  可用性: Windows。

  3.2 版新加入.

`signal.``CTRL_BREAK_EVENT`

  对应于 `Ctrl+Break` 击键事件的信号。此信号只能用于 `os.kill()` 。

  可用性: Windows。

  3.2 版新加入.

`signal.``NSIG`

  比最高信号数多一。

`signal.``ITIMER_REAL`

  实时递减间隔计时器，并在到期时发送 `SIGALRM` 。

`signal.``ITIMER_VIRTUAL`

  仅在进程执行时递减间隔计时器，并在到期时发送 SIGVTALRM 。

`signal.``ITIMER_PROF`

  Decrements interval timer both when the process executes and when the system is executing on behalf of the process. Coupled with ITIMER_VIRTUAL, this timer is usually used to profile the time spent by the application in user and kernel space. SIGPROF is delivered upon expiration.

`signal.``SIG_BLOCK`

  A possible value for the how parameter to `pthread_sigmask()` indicating that signals are to be blocked.

  3.3 版新加入.

`signal.``SIG_UNBLOCK`

  A possible value for the how parameter to `pthread_sigmask()` indicating that signals are to be unblocked.

  3.3 版新加入.

`signal.``SIG_SETMASK`

  A possible value for the how parameter to `pthread_sigmask()` indicating that the signal mask is to be replaced.

  3.3 版新加入.

The `signal` module defines one exception:

exception `signal.``ItimerError`

  Raised to signal an error from the underlying `setitimer()` or `getitimer()` implementation. Expect this error if an invalid interval timer or a negative time is passed to `setitimer()`. This error is a subtype of `OSError`.

  3.3 版新加入: This error used to be a subtype of `IOError`, which is now an alias of `OSError`.

The `signal` module defines the following functions:

`signal.``alarm`(time)

  If time is non-zero, this function requests that a `SIGALRM` signal be sent to the process in time seconds. Any previously scheduled alarm is canceled (only one alarm can be scheduled at any time). The returned value is then the number of seconds before any previously set alarm was to have been delivered. If time is zero, no alarm is scheduled, and any scheduled alarm is canceled. If the return value is zero, no alarm is currently scheduled.

  Availability: Unix. See the man page alarm(2) for further information.

`signal.``getsignal`(signalnum)

  Return the current signal handler for the signal signalnum. The returned value may be a callable Python object, or one of the special values `signal.SIG_IGN`, `signal.SIG_DFL` or `None`. Here, `signal.SIG_IGN` means that the signal was previously ignored, `signal.SIG_DFL` means that the default way of handling the signal was previously in use, and `None` means that the previous signal handler was not installed from Python.

`signal.``strsignal`(signalnum)

  Return the system description of the signal signalnum, such as "Interrupt", "Segmentation fault", etc. Returns `None` if the signal is not recognized.

  3.8 版新加入.

`signal.``valid_signals`()

  Return the set of valid signal numbers on this platform. This can be less than `range(1, NSIG)` if some signals are reserved by the system for internal use.

  3.8 版新加入.

`signal.``pause`()

  Cause the process to sleep until a signal is received; the appropriate handler will then be called. Returns nothing.

  Availability: Unix. See the man page signal(2) for further information.

  See also `sigwait()`, `sigwaitinfo()`, `sigtimedwait()` and `sigpending()`.

`signal.``raise_signal`(signum)

  Sends a signal to the calling process. Returns nothing.

  3.8 版新加入.

`signal.``pidfd_send_signal`(pidfd, sig, siginfo=None, flags=0)

  Send signal sig to the process referred to by file descriptor pidfd. Python does not currently support the siginfo parameter; it must be `None`. The flags argument is provided for future extensions; no flag values are currently defined.

  See the pidfd_send_signal(2) man page for more information.

  Availability: Linux 5.1+

  3.9 版新加入.

`signal.``pthread_kill`(thread_id, signalnum)

  Send the signal signalnum to the thread thread_id, another thread in the same process as the caller. The target thread can be executing any code (Python or not). However, if the target thread is executing the Python interpreter, the Python signal handlers will be executed by the main thread of the main interpreter. Therefore, the only point of sending a signal to a particular Python thread would be to force a running system call to fail with `InterruptedError`.

  Use `threading.get_ident()` or the `ident` attribute of `threading.Thread` objects to get a suitable value for thread_id.

  If signalnum is 0, then no signal is sent, but error checking is still performed; this can be used to check if the target thread is still running.

  Raises an auditing event `signal.pthread_kill` with arguments `thread_id`, `signalnum`.

  Availability: Unix. See the man page pthread_kill(3) for further information.

  See also `os.kill()`.

  3.3 版新加入.

`signal.``pthread_sigmask`(how, mask)

  Fetch and/or change the signal mask of the calling thread. The signal mask is the set of signals whose delivery is currently blocked for the caller. Return the old signal mask as a set of signals.

  The behavior of the call is dependent on the value of how, as follows.

  - `SIG_BLOCK`: The set of blocked signals is the union of the current set and the mask argument.

  - `SIG_UNBLOCK`: The signals in mask are removed from the current set of blocked signals. It is permissible to attempt to unblock a signal which is not blocked.

  - `SIG_SETMASK`: The set of blocked signals is set to the mask argument.

  mask is a set of signal numbers (e.g. {`signal.SIGINT`, `signal.SIGTERM`}). Use `valid_signals()` for a full mask including all signals.

  For example, `signal.pthread_sigmask(signal.SIG_BLOCK, [])` reads the signal mask of the calling thread.

  `SIGKILL` and `SIGSTOP` cannot be blocked.

  Availability: Unix. See the man page sigprocmask(3) and pthread_sigmask(3) for further information.

  See also `pause()`, `sigpending()` and `sigwait()`.

  3.3 版新加入.

`signal.``setitimer`(which, seconds, interval=0.0)

  Sets given interval timer (one of `signal.ITIMER_REAL`, `signal.ITIMER_VIRTUAL` or `signal.ITIMER_PROF`) specified by which to fire after seconds (float is accepted, different from `alarm()`) and after that every interval seconds (if interval is non-zero). The interval timer specified by which can be cleared by setting seconds to zero.

  When an interval timer fires, a signal is sent to the process. The signal sent is dependent on the timer being used; `signal.ITIMER_REAL` will deliver `SIGALRM`, `signal.ITIMER_VIRTUAL` sends `SIGVTALRM`, and `signal.ITIMER_PROF` will deliver `SIGPROF`.

  The old values are returned as a tuple: (delay, interval).

  Attempting to pass an invalid interval timer will cause an `ItimerError`.

  Availability: Unix.

`signal.``getitimer`(which)

  Returns current value of a given interval timer specified by which.

  Availability: Unix.

`signal.``set_wakeup_fd`(fd, *, warn_on_full_buffer=True)

  Set the wakeup file descriptor to fd. When a signal is received, the signal number is written as a single byte into the fd. This can be used by a library to wakeup a poll or select call, allowing the signal to be fully processed.

  The old wakeup fd is returned (or -1 if file descriptor wakeup was not enabled). If fd is -1, file descriptor wakeup is disabled. If not -1, fd must be non-blocking. It is up to the library to remove any bytes from fd before calling poll or select again.

  When threads are enabled, this function can only be called from the main thread of the main interpreter; attempting to call it from other threads will cause a `ValueError` exception to be raised.

  There are two common ways to use this function. In both approaches, you use the fd to wake up when a signal arrives, but then they differ in how they determine which signal or signals have arrived.

  In the first approach, we read the data out of the fd's buffer, and the byte values give you the signal numbers. This is simple, but in rare cases it can run into a problem: generally the fd will have a limited amount of buffer space, and if too many signals arrive too quickly, then the buffer may become full, and some signals may be lost. If you use this approach, then you should set `warn_on_full_buffer=True`, which will at least cause a warning to be printed to stderr when signals are lost.

  In the second approach, we use the wakeup fd only for wakeups, and ignore the actual byte values. In this case, all we care about is whether the fd's buffer is empty or non-empty; a full buffer doesn't indicate a problem at all. If you use this approach, then you should set `warn_on_full_buffer=False`, so that your users are not confused by spurious warning messages.

  3.5 版更變: On Windows, the function now also supports socket handles.

  3.7 版更變: Added `warn_on_full_buffer` parameter.

`signal.``siginterrupt`(signalnum, flag)

  Change system call restart behaviour: if flag is `False`, system calls will be restarted when interrupted by signal signalnum, otherwise system calls will be interrupted. Returns nothing.

  Availability: Unix. See the man page siginterrupt(3) for further information.

  Note that installing a signal handler with `signal()` will reset the restart behaviour to interruptible by implicitly calling `siginterrupt()` with a true flag value for the given signal.

`signal.``signal`(signalnum, handler)

  Set the handler for signal signalnum to the function handler. handler can be a callable Python object taking two arguments (see below), or one of the special values `signal.SIG_IGN` or `signal.SIG_DFL`. The previous signal handler will be returned (see the description of `getsignal()` above). (See the Unix man page signal(2) for further information.)

  When threads are enabled, this function can only be called from the main thread of the main interpreter; attempting to call it from other threads will cause a `ValueError` exception to be raised.

  The handler is called with two arguments: the signal number and the current stack frame (`None` or a frame object; for a description of frame objects, see the description in the type hierarchy or see the attribute descriptions in the `inspect` module).

  On Windows, `signal()` can only be called with `SIGABRT`, `SIGFPE`, `SIGILL`, `SIGINT`, `SIGSEGV`, `SIGTERM`, or `SIGBREAK`. A `ValueError` will be raised in any other case. Note that not all systems define the same set of signal names; an `AttributeError` will be raised if a signal name is not defined as `SIG*` module level constant.

`signal.``sigpending`()

  Examine the set of signals that are pending for delivery to the calling thread (i.e., the signals which have been raised while blocked). Return the set of the pending signals.

  Availability: Unix. See the man page sigpending(2) for further information.

  See also `pause()`, `pthread_sigmask()` and `sigwait()`.

  3.3 版新加入.

`signal.``sigwait`(sigset)

  Suspend execution of the calling thread until the delivery of one of the signals specified in the signal set sigset. The function accepts the signal (removes it from the pending list of signals), and returns the signal number.

  Availability: Unix. See the man page sigwait(3) for further information.

  See also `pause()`, `pthread_sigmask()`, `sigpending()`, `sigwaitinfo()` and `sigtimedwait()`.

  3.3 版新加入.

`signal.``sigwaitinfo`(sigset)

  Suspend execution of the calling thread until the delivery of one of the signals specified in the signal set sigset. The function accepts the signal and removes it from the pending list of signals. If one of the signals in sigset is already pending for the calling thread, the function will return immediately with information about that signal. The signal handler is not called for the delivered signal. The function raises an `InterruptedError` if it is interrupted by a signal that is not in sigset.

  The return value is an object representing the data contained in the `siginfo_t` structure, namely: `si_signo`, `si_code`, `si_errno`, `si_pid`, `si_uid`, `si_status`, `si_band`.

  Availability: Unix. See the man page sigwaitinfo(2) for further information.

  See also `pause()`, `sigwait()` and `sigtimedwait()`.

  3.3 版新加入.

  3.5 版更變: The function is now retried if interrupted by a signal not in sigset and the signal handler does not raise an exception (see PEP 475 for the rationale).

`signal.``sigtimedwait`(sigset, timeout)

  Like `sigwaitinfo()`, but takes an additional timeout argument specifying a timeout. If timeout is specified as `0`, a poll is performed. Returns `None` if a timeout occurs.

  Availability: Unix. See the man page sigtimedwait(2) for further information.

  See also `pause()`, `sigwait()` and `sigwaitinfo()`.

  3.3 版新加入.

  3.5 版更變: The function is now retried with the recomputed timeout if interrupted by a signal not in sigset and the signal handler does not raise an exception (see PEP 475 for the rationale).

## 示例

Here is a minimal example program. It uses the `alarm()` function to limit the time spent waiting to open a file; this is useful if the file is for a serial device that may not be turned on, which would normally cause the `os.open()` to hang indefinitely. The solution is to set a 5-second alarm before opening the file; if the operation takes too long, the alarm signal will be sent, and the handler raises an exception.

    import signal, os

    def handler(signum, frame):
        print('Signal handler called with signal', signum)
        raise OSError("Couldn't open device!")

    # Set the signal handler and a 5-second alarm
    signal.signal(signal.SIGALRM, handler)
    signal.alarm(5)

    # This open() may hang indefinitely
    fd = os.open('/dev/ttyS0', os.O_RDWR)

    signal.alarm(0)          # Disable the alarm

## Note on SIGPIPE

Piping output of your program to tools like head(1) will cause a `SIGPIPE` signal to be sent to your process when the receiver of its standard output closes early. This results in an exception like `BrokenPipeError: [Errno 32] Broken pipe`. To handle this case, wrap your entry point to catch this exception as follows:

    import os
    import sys

    def main():
        try:
            # simulate large output (your code replaces this loop)
            for x in range(10000):
                print("y")
            # flush output here to force SIGPIPE to be triggered
            # while inside this try block.
            sys.stdout.flush()
        except BrokenPipeError:
            # Python flushes standard streams on exit; redirect remaining output
            # to devnull to avoid another BrokenPipeError at shutdown
            devnull = os.open(os.devnull, os.O_WRONLY)
            os.dup2(devnull, sys.stdout.fileno())
            sys.exit(1)  # Python exits with error code 1 on EPIPE

    if __name__ == '__main__':
        main()

Do not set `SIGPIPE`'s disposition to `SIG_DFL` in order to avoid `BrokenPipeError`. Doing that would cause your program to exit unexpectedly also whenever any socket connection is interrupted while your program is still writing to it.