数字协议

int PyNumber_Check(PyObject *o)

如果对象 o 提供数字的协议,返回真 1,否则返回假。这个函数不会调用失败。

PyObject* PyNumber_Add(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of adding o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 + o2.

PyObject* PyNumber_Subtract(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of subtracting o2 from o1, or NULL on failure. This is the equivalent of the Python expression o1 - o2.

PyObject* PyNumber_Multiply(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of multiplying o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 * o2.

PyObject* PyNumber_MatrixMultiply(PyObject *o1, PyObject *o2)

Returns the result of matrix multiplication on o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 @ o2.

3.5 版新加入.

PyObject* PyNumber_FloorDivide(PyObject *o1, PyObject *o2)
Return value: New reference.

Return the floor of o1 divided by o2, or NULL on failure. This is equivalent to the 「classic」 division of integers.

PyObject* PyNumber_TrueDivide(PyObject *o1, PyObject *o2)
Return value: New reference.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is 「approximate」 because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers.

PyObject* PyNumber_Remainder(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the remainder of dividing o1 by o2, or NULL on failure. This is the equivalent of the Python expression o1 % o2.

PyObject* PyNumber_Divmod(PyObject *o1, PyObject *o2)
Return value: New reference.

See the built-in function divmod(). Returns NULL on failure. This is the equivalent of the Python expression divmod(o1, o2).

PyObject* PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3)
Return value: New reference.

See the built-in function pow(). Returns NULL on failure. This is the equivalent of the Python expression pow(o1, o2, o3), where o3 is optional. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject* PyNumber_Negative(PyObject *o)
Return value: New reference.

Returns the negation of o on success, or NULL on failure. This is the equivalent of the Python expression -o.

PyObject* PyNumber_Positive(PyObject *o)
Return value: New reference.

Returns o on success, or NULL on failure. This is the equivalent of the Python expression +o.

PyObject* PyNumber_Absolute(PyObject *o)
Return value: New reference.

Returns the absolute value of o, or NULL on failure. This is the equivalent of the Python expression abs(o).

PyObject* PyNumber_Invert(PyObject *o)
Return value: New reference.

Returns the bitwise negation of o on success, or NULL on failure. This is the equivalent of the Python expression ~o.

PyObject* PyNumber_Lshift(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 << o2.

PyObject* PyNumber_Rshift(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 >> o2.

PyObject* PyNumber_And(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise and」 of o1 and o2 on success and NULL on failure. This is the equivalent of the Python expression o1 & o2.

PyObject* PyNumber_Xor(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise exclusive or」 of o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 ^ o2.

PyObject* PyNumber_Or(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise or」 of o1 and o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 | o2.

PyObject* PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of adding o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 += o2.

PyObject* PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of subtracting o2 from o1, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 -= o2.

PyObject* PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of multiplying o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 *= o2.

PyObject* PyNumber_InPlaceMatrixMultiply(PyObject *o1, PyObject *o2)

Returns the result of matrix multiplication on o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 @= o2.

3.5 版新加入.

PyObject* PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the mathematical floor of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 //= o2.

PyObject* PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2)
Return value: New reference.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is 「approximate」 because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers. The operation is done in-place when o1 supports it.

PyObject* PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the remainder of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 %= o2.

PyObject* PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3)
Return value: New reference.

See the built-in function pow(). Returns NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 **= o2 when o3 is Py_None, or an in-place variant of pow(o1, o2, o3) otherwise. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject* PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 <<= o2.

PyObject* PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 >>= o2.

PyObject* PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise and」 of o1 and o2 on success and NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 &= o2.

PyObject* PyNumber_InPlaceXor(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise exclusive or」 of o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 ^= o2.

PyObject* PyNumber_InPlaceOr(PyObject *o1, PyObject *o2)
Return value: New reference.

Returns the 「bitwise or」 of o1 and o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 |= o2.

PyObject* PyNumber_Long(PyObject *o)
Return value: New reference.

Returns the o converted to an integer object on success, or NULL on failure. This is the equivalent of the Python expression int(o).

PyObject* PyNumber_Float(PyObject *o)
Return value: New reference.

Returns the o converted to a float object on success, or NULL on failure. This is the equivalent of the Python expression float(o).

PyObject* PyNumber_Index(PyObject *o)

Returns the o converted to a Python int on success or NULL with a TypeError exception raised on failure.

PyObject* PyNumber_ToBase(PyObject *n, int base)

返回整数 n 转换成以 base 为基数的字符串后的结果。这个 base 参数必须是 2,8,10 或者 16 。对于基数 2,8,或 16 ,返回的字符串将分别加上基数标识 '0b', '0o', or '0x'。如果 n 不是 Python 中的整数 int 类型,就先通过 PyNumber_Index() 将它转换成整数类型。

Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc)

如果 o 是一个整数类型的解释型,返回 o 转换成一个 Py_ssize_t 值项后的结果。如果调用失败,返回 -1 并引发异常。

If o can be converted to a Python int but the attempt to convert to a Py_ssize_t value would raise an OverflowError, then the exc argument is the type of exception that will be raised (usually IndexError or OverflowError). If exc is NULL, then the exception is cleared and the value is clipped to PY_SSIZE_T_MIN for a negative integer or PY_SSIZE_T_MAX for a positive integer.

int PyIndex_Check(PyObject *o)

如果 o 是一个索引整数(存有 nb_index 位置并有 tp_as_number 填入其中)则返回 1,否则返回 0 。这个函数不会调用失败。