"queue" --- 同步佇列 (queue) class（類別）
******************************************

**原始碼：**Lib/queue.py

======================================================================

"queue" module（模組）實作多生產者、多消費者佇列。在執行緒程式設計中，
必須在多執行緒之間安全地交換資訊時，特別有用。此 module 中的 "Queue"
class 實作所有必需的鎖定語義 (locking semantics)。

The module implements three types of queue, which differ only in the
order in which the entries are retrieved.  In a FIFO (first-in, first-
out) queue, the first tasks added are the first retrieved.  In a LIFO
(last-in, first-out) queue, the most recently added entry is the first
retrieved (operating like a stack).  With a priority queue, the
entries are kept sorted (using the "heapq" module) and the lowest
valued entry is retrieved first.

在內部，這三種型別的佇列使用鎖 (lock) 來暫時阻塞競爭執行緒；但是，它們
並不是被設計來處理執行緒內的 reentrancy（可重入）。

此外，此 module 實作一個「簡單」的 FIFO (first-in, first-out) 佇列型別
"SimpleQueue"，其特定的實作是以較少的功能為代價，來提供額外的保證。

"queue" module 定義了以下的 class 和例外：

class queue.Queue(maxsize=0)

   FIFO (first-in, first-out) 佇列的建構子 (constructor)。*maxsize* 是
   一個整數，用於設置佇列中可放置的項目數的上限。一旦達到此大小，插入
   將會阻塞，直到佇列中的項目被消耗。如果 *maxsize* 小於或等於零，則佇
   列大小為無限。

class queue.LifoQueue(maxsize=0)

   LIFO (last-in, first-out) 佇列的建構子。*maxsize* 是一個整數，用於
   設置佇列中可放置的項目數的上限。一旦達到此大小，插入將被鎖定，到佇
   列中的項目被消耗。如果 *maxsize* 小於或等於零，則佇列大小為無限。

class queue.PriorityQueue(maxsize=0)

   優先佇列的建構子。*maxsize* 是一個整數，用於設置佇列中可放置的項目
   數的上限。一旦達到此大小，插入將被阻塞，直到佇列中的項目被消耗。如
   果 *maxsize* 小於或等於零，則佇列大小為無限。

   The lowest valued entries are retrieved first (the lowest valued
   entry is the one that would be returned by "min(entries)").  A
   typical pattern for entries is a tuple in the form:
   "(priority_number, data)".

   如果 *data* 元素為不可比較的，則可以將資料包裝在一個 class 中，該
   class 忽略資料項目並僅比較優先數：

      from dataclasses import dataclass, field
      from typing import Any

      @dataclass(order=True)
      class PrioritizedItem:
          priority: int
          item: Any=field(compare=False)

class queue.SimpleQueue

   無界的 FIFO (first-in, first-out) 佇列的建構子。簡單佇列缺少任務追
   蹤等進階功能。

   3.7 版新加入.

exception queue.Empty

   當對一個空的 "Queue" 物件呼叫非阻塞的 (non-blocking) "get()"（或
   "get_nowait()"）將引發此例外。

exception queue.Full

   當對一個已滿的 "Queue" 物件呼叫非阻塞的 "put()"（或 "put_nowait()"
   ）將引發此例外。


佇列物件
========

佇列物件（"Queue"、"LifoQueue"、"PriorityQueue"）提供下面描述的公用
method。

Queue.qsize()

   回傳佇列的近似大小。注意，qsize() > 0 並不能保證後續的 get() 不會阻
   塞，qsize() < maxsize 也不會保證 put() 不會阻塞。

Queue.empty()

   如果佇列為空，則回傳 "True"，否則回傳 "False"。如果 empty() 回傳
   "True"，則不保證後續呼叫 put() 不會阻塞。同樣，如果 empty() 回傳
   "False"，則不保證後續呼叫 get() 不會阻塞。

Queue.full()

   如果佇列已滿，則回傳 "True" ，否則回傳 "False"。如果 full() 回傳
   "True"，則不保證後續呼叫 get() 不會阻塞。同樣，如果 full() 回傳
   "False"，則不保證後續呼叫 put() 不會阻塞。

Queue.put(item, block=True, timeout=None)

   Put *item* into the queue.  If optional args *block* is true and
   *timeout* is "None" (the default), block if necessary until a free
   slot is available.  If *timeout* is a positive number, it blocks at
   most *timeout* seconds and raises the "Full" exception if no free
   slot was available within that time. Otherwise (*block* is false),
   put an item on the queue if a free slot is immediately available,
   else raise the "Full" exception (*timeout* is ignored in that
   case).

Queue.put_nowait(item)

   等效於 "put(item, block=False)"。

Queue.get(block=True, timeout=None)

   從佇列中移除並回傳一個項目。如果可選的 args *block* 為 true，且
   *timeout* 為 "None"（預設值），則在必要時阻塞，直到有可用的項目。如
   果 *timeout* 是正數，則最多會阻塞 *timeout* 秒，如果該時間內沒有可
   用的項目，則會引發 "Empty" 例外。否則（*block* 為 false），如果立即
   可用，則回傳一個項目，否則引發 "Empty" 例外（在這種情況下，
   *timeout* 將被忽略）。

   Prior to 3.0 on POSIX systems, and for all versions on Windows, if
   *block* is true and *timeout* is "None", this operation goes into
   an uninterruptible wait on an underlying lock.  This means that no
   exceptions can occur, and in particular a SIGINT will not trigger a
   "KeyboardInterrupt".

Queue.get_nowait()

   等效於 "get(False)"。

有兩個 method 可以支援追蹤放入佇列的任務是否已由常駐消費者執行緒
(daemon consumer threads) 完全處理。

Queue.task_done()

   表示先前放入佇列的任務已完成。由佇列消費者執行緒使用。對於用來提取
   任務的每個 "get()"，隨後呼叫 "task_done()" 告訴佇列任務的處理已完成
   。

   如果目前 "join()" 阻塞，它將會在所有項目都已處理完畢後恢復（代表對
   於以 "put()" 放進佇列的每個項目，都要收到 "task_done()" 的呼叫）。

   如果呼叫次數超過佇列中放置的項目數量，則引發 "ValueError"。

Queue.join()

   持續阻塞直到佇列中的所有項目都已被獲取並處理完畢。

   The count of unfinished tasks goes up whenever an item is added to
   the queue. The count goes down whenever a consumer thread calls
   "task_done()" to indicate that the item was retrieved and all work
   on it is complete.  When the count of unfinished tasks drops to
   zero, "join()" unblocks.

如何等待放入佇列的任務完成的範例：

   import threading
   import queue

   q = queue.Queue()

   def worker():
       while True:
           item = q.get()
           print(f'Working on {item}')
           print(f'Finished {item}')
           q.task_done()

   # Turn-on the worker thread.
   threading.Thread(target=worker, daemon=True).start()

   # Send thirty task requests to the worker.
   for item in range(30):
       q.put(item)

   # Block until all tasks are done.
   q.join()
   print('All work completed')


SimpleQueue 物件
================

"SimpleQueue" 物件提供下面描述的公用 method。

SimpleQueue.qsize()

   傳回佇列的近似大小。注意，qsize() > 0 並不能保證後續的 get() 不會阻
   塞。

SimpleQueue.empty()

   Return "True" if the queue is empty, "False" otherwise.  If empty()
   returns "False" it doesn't guarantee that a subsequent call to
   get() will not block.

SimpleQueue.put(item, block=True, timeout=None)

   將 *item* 放入佇列中。此 method 從不阻塞，並且都會成功（除了潛在的
   低階錯誤，像是分配記憶體失敗）。可選的 args *block* 和 *timeout* 會
   被忽略，它們僅是為了與 "Queue.put()" 相容才存在。

   **CPython 實作細節：** 此 method 有一個可重入 (reentrant) 的 C 實作
   。意思就是，一個 "put()" 或 "get()" 呼叫，可以被同一執行緒中的另一
   個 "put()" 呼叫中斷，而不會造成死鎖 (deadlock) 或損壞佇列中的內部狀
   態。這使得它適合在解構子 (destructor) 中使用，像是 "__del__" method
   或 "weakref" 回呼函式 (callback)。

SimpleQueue.put_nowait(item)

   等效於 "put(item, block=False)"，用於與 "Queue.put_nowait()" 相容。

SimpleQueue.get(block=True, timeout=None)

   從佇列中移除並回傳一個項目。如果可選的 args *block* 為 true，且
   *timeout* 為 "None"（預設值），則在必要時阻塞，直到有可用的項目。如
   果 *timeout* 是正數，則最多會阻塞 *timeout* 秒，如果該時間內沒有可
   用的項目，則會引發 "Empty" 例外。否則（*block* 為 false），如果立即
   可用，則回傳一個項目，否則引發 "Empty" 例外（在這種情況下，
   *timeout* 將被忽略）。

SimpleQueue.get_nowait()

   等效於 "get(False)"。

也參考:

  Class "multiprocessing.Queue"
     用於多行程處理 (multi-processing)（而非多執行緒）情境 (context)
     的佇列 class。

  "collections.deque" 是無界佇列的替代實作，有快速且具原子性 (atomic)
  的 "append()" 和 "popleft()" 操作，這些操作不需要鎖定，並且還支持索
  引。
