# 数字协议

int `PyNumber_Check`( PyObject *o)

  如果对象 o 提供数字的协议，返回真 `1`，否则返回假。这个函数不会调用失败。

  在 3.8 版更改: 如果 o 是一个索引整数则返回 `1`。

PyObject* `PyNumber_Add`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of adding o1 and o2, or `NULL` on failure. This is the equivalent of the Python expression `o1 + o2`.

PyObject* `PyNumber_Subtract`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of subtracting o2 from o1, or `NULL` on failure. This is the equivalent of the Python expression `o1 - o2`.

PyObject* `PyNumber_Multiply`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of multiplying o1 and o2, or `NULL` on failure. This is the equivalent of the Python expression `o1 * o2`.

PyObject* `PyNumber_MatrixMultiply`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of matrix multiplication on o1 and o2, or `NULL` on failure. This is the equivalent of the Python expression `o1 @ o2`.

  3.5 新版功能.

PyObject* `PyNumber_FloorDivide`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Return the floor of o1 divided by o2, or `NULL` on failure. This is equivalent to the "classic" division of integers.

PyObject* `PyNumber_TrueDivide`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Return a reasonable approximation for the mathematical value of o1 divided by o2, or `NULL` on failure. The return value is "approximate" because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers.

PyObject* `PyNumber_Remainder`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the remainder of dividing o1 by o2, or `NULL` on failure. This is the equivalent of the Python expression `o1 % o2`.

PyObject* `PyNumber_Divmod`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  See the built-in function `divmod()`. Returns `NULL` on failure. This is the equivalent of the Python expression `divmod(o1, o2)`.

PyObject* `PyNumber_Power`( PyObject *o1, PyObject *o2, PyObject *o3)
  Return value: New reference.

  See the built-in function `pow()`. Returns `NULL` on failure. This is the equivalent of the Python expression `pow(o1, o2, o3)`, where o3 is optional. If o3 is to be ignored, pass `Py_None` in its place (passing `NULL` for o3 would cause an illegal memory access).

PyObject* `PyNumber_Negative`( PyObject *o)
  Return value: New reference.

  Returns the negation of o on success, or `NULL` on failure. This is the equivalent of the Python expression `-o`.

PyObject* `PyNumber_Positive`( PyObject *o)
  Return value: New reference.

  Returns o on success, or `NULL` on failure. This is the equivalent of the Python expression `+o`.

PyObject* `PyNumber_Absolute`( PyObject *o)
  Return value: New reference.

  Returns the absolute value of o, or `NULL` on failure. This is the equivalent of the Python expression `abs(o)`.

PyObject* `PyNumber_Invert`( PyObject *o)
  Return value: New reference.

  Returns the bitwise negation of o on success, or `NULL` on failure. This is the equivalent of the Python expression `~o`.

PyObject* `PyNumber_Lshift`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of left shifting o1 by o2 on success, or `NULL` on failure. This is the equivalent of the Python expression `o1 << o2`.

PyObject* `PyNumber_Rshift`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of right shifting o1 by o2 on success, or `NULL` on failure. This is the equivalent of the Python expression `o1 >> o2`.

PyObject* `PyNumber_And`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise and" of o1 and o2 on success and `NULL` on failure. This is the equivalent of the Python expression `o1 & o2`.

PyObject* `PyNumber_Xor`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise exclusive or" of o1 by o2 on success, or `NULL` on failure. This is the equivalent of the Python expression `o1 ^ o2`.

PyObject* `PyNumber_Or`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise or" of o1 and o2 on success, or `NULL` on failure. This is the equivalent of the Python expression `o1 | o2`.

PyObject* `PyNumber_InPlaceAdd`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of adding o1 and o2, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 += o2`.

PyObject* `PyNumber_InPlaceSubtract`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of subtracting o2 from o1, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 -= o2`.

PyObject* `PyNumber_InPlaceMultiply`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of multiplying o1 and o2, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 *= o2`.

PyObject* `PyNumber_InPlaceMatrixMultiply`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of matrix multiplication on o1 and o2, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 @= o2`.

  3.5 新版功能.

PyObject* `PyNumber_InPlaceFloorDivide`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the mathematical floor of dividing o1 by o2, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 //= o2`.

PyObject* `PyNumber_InPlaceTrueDivide`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Return a reasonable approximation for the mathematical value of o1 divided by o2, or `NULL` on failure. The return value is "approximate" because binary floating point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating point value when passed two integers. The operation is done in-place when o1 supports it.

PyObject* `PyNumber_InPlaceRemainder`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the remainder of dividing o1 by o2, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 %= o2`.

PyObject* `PyNumber_InPlacePower`( PyObject *o1, PyObject *o2, PyObject *o3)
  Return value: New reference.

  See the built-in function `pow()`. Returns `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 **= o2` when o3 is `Py_None`, or an in-place variant of `pow(o1, o2, o3)` otherwise. If o3 is to be ignored, pass `Py_None` in its place (passing `NULL` for o3 would cause an illegal memory access).

PyObject* `PyNumber_InPlaceLshift`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of left shifting o1 by o2 on success, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 <<= o2`.

PyObject* `PyNumber_InPlaceRshift`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the result of right shifting o1 by o2 on success, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 >>= o2`.

PyObject* `PyNumber_InPlaceAnd`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise and" of o1 and o2 on success and `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 &= o2`.

PyObject* `PyNumber_InPlaceXor`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise exclusive or" of o1 by o2 on success, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 ^= o2`.

PyObject* `PyNumber_InPlaceOr`( PyObject *o1, PyObject *o2)
  Return value: New reference.

  Returns the "bitwise or" of o1 and o2 on success, or `NULL` on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement `o1 |= o2`.

PyObject* `PyNumber_Long`( PyObject *o)
  Return value: New reference.

  Returns the o converted to an integer object on success, or `NULL` on failure. This is the equivalent of the Python expression `int(o)`.

PyObject* `PyNumber_Float`( PyObject *o)
  Return value: New reference.

  Returns the o converted to a float object on success, or `NULL` on failure. This is the equivalent of the Python expression `float(o)`.

PyObject* `PyNumber_Index`( PyObject *o)
  Return value: New reference.

  Returns the o converted to a Python int on success or `NULL` with a `TypeError` exception raised on failure.

PyObject* `PyNumber_ToBase`( PyObject *n, int base)
  Return value: New reference.

  返回整数 n 转换成以 base 为基数的字符串后的结果。这个 base 参数必须是 2，8，10 或者 16 。对于基数 2，8，或 16 ，返回的字符串将分别加上基数标识 `'0b'`, `'0o'`, or `'0x'`。如果 n 不是 Python 中的整数 int 类型，就先通过 `PyNumber_Index()` 将它转换成整数类型。

Py_ssize_t `PyNumber_AsSsize_t`( PyObject *o, PyObject *exc)

  如果 o 是一个整数类型的解释型，返回 o 转换成一个 Py_ssize_t 值项后的结果。如果调用失败，返回 `-1` 并引发异常。

  If o can be converted to a Python int but the attempt to convert to a Py_ssize_t value would raise an `OverflowError`, then the exc argument is the type of exception that will be raised (usually `IndexError` or `OverflowError`). If exc is `NULL`, then the exception is cleared and the value is clipped to `PY_SSIZE_T_MIN` for a negative integer or `PY_SSIZE_T_MAX` for a positive integer.

int `PyIndex_Check`( PyObject *o)

  如果 o 是一个索引整数（存有 nb_index 位置并有 tp_as_number 填入其中）则返回 `1`，否则返回 `0` 。这个函数不会调用失败。