"itertools" --- 为高效循环而创建迭代器的函数
********************************************

======================================================================

本模块实现一系列 *iterator* ，这些迭代器受到APL，Haskell和SML的启发。
为了适用于Python，它们都被重新写过。

本模块标准化了一个快速、高效利用内存的核心工具集，这些工具本身或组合都
很有用。它们一起形成了“迭代器代数”，这使得在纯Python中有可能创建简洁又
高效的专用工具。

例如，SML有一个制表工具： "tabulate(f)"，它可产生一个序列 "f(0), f(1),
..."。在Python中可以组合 "map()" 和 "count()" 实现： "map(f, count())"
。

These tools and their built-in counterparts also work well with the
high-speed functions in the "operator" module.  For example, the
multiplication operator can be mapped across two vectors to form an
efficient dot-product: "sum(starmap(operator.mul, zip(vec1, vec2,
strict=True)))".

**无穷迭代器：**

+--------------------+-------------------+---------------------------------------------------+-------------------------------------------+
| 迭代器             | 实参              | 结果                                              | 示例                                      |
|====================|===================|===================================================|===========================================|
| "count()"          | start, [step]     | start, start+step, start+2*step, ...              | "count(10) --> 10 11 12 13 14 ..."        |
+--------------------+-------------------+---------------------------------------------------+-------------------------------------------+
| "cycle()"          | p                 | p0, p1, ... plast, p0, p1, ...                    | "cycle('ABCD') --> A B C D A B C D ..."   |
+--------------------+-------------------+---------------------------------------------------+-------------------------------------------+
| "repeat()"         | elem [,n]         | elem, elem, elem, ... 重复无限次或n次             | "repeat(10, 3) --> 10 10 10"              |
+--------------------+-------------------+---------------------------------------------------+-------------------------------------------+

**根据最短输入序列长度停止的迭代器：**

+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| 迭代器                       | 实参                         | 结果                                              | 示例                                                          |
|==============================|==============================|===================================================|===============================================================|
| "accumulate()"               | p [,func]                    | p0, p0+p1, p0+p1+p2, ...                          | "accumulate([1,2,3,4,5]) --> 1 3 6 10 15"                     |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "chain()"                    | p, q, ...                    | p0, p1, ... plast, q0, q1, ...                    | "chain('ABC', 'DEF') --> A B C D E F"                         |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "chain.from_iterable()"      | iterable -- 可迭代对象       | p0, p1, ... plast, q0, q1, ...                    | "chain.from_iterable(['ABC', 'DEF']) --> A B C D E F"         |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "compress()"                 | data, selectors              | (d[0] if s[0]), (d[1] if s[1]), ...               | "compress('ABCDEF', [1,0,1,0,1,1]) --> A C E F"               |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "dropwhile()"                | pred, seq                    | seq[n], seq[n+1], ... 从pred首次真值测试失败开始  | "dropwhile(lambda x: x<5, [1,4,6,4,1]) --> 6 4 1"             |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "filterfalse()"              | pred, seq                    | seq中pred(x)为假值的元素，x是seq中的元素。        | "filterfalse(lambda x: x%2, range(10)) --> 0 2 4 6 8"         |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "groupby()"                  | iterable[, key]              | 根据key(v)值分组的迭代器                          |                                                               |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "islice()"                   | seq, [start,] stop [, step]  | seq[start:stop:step]中的元素                      | "islice('ABCDEFG', 2, None) --> C D E F G"                    |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "pairwise()"                 | iterable -- 可迭代对象       | (p[0], p[1]), (p[1], p[2])                        | "pairwise('ABCDEFG') --> AB BC CD DE EF FG"                   |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "starmap()"                  | func, seq                    | func(*seq[0]), func(*seq[1]), ...                 | "starmap(pow, [(2,5), (3,2), (10,3)]) --> 32 9 1000"          |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "takewhile()"                | pred, seq                    | seq[0], seq[1], ..., 直到pred真值测试失败         | "takewhile(lambda x: x<5, [1,4,6,4,1]) --> 1 4"               |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "tee()"                      | it, n                        | it1, it2, ... itn 将一个迭代器拆分为n个迭代器     |                                                               |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+
| "zip_longest()"              | p, q, ...                    | (p[0], q[0]), (p[1], q[1]), ...                   | "zip_longest('ABCD', 'xy', fillvalue='-') --> Ax By C- D-"    |
+------------------------------+------------------------------+---------------------------------------------------+---------------------------------------------------------------+

**排列组合迭代器：**

+------------------------------------------------+----------------------+---------------------------------------------------------------+
| 迭代器                                         | 实参                 | 结果                                                          |
|================================================|======================|===============================================================|
| "product()"                                    | p, q, ... [repeat=1] | 笛卡尔积，相当于嵌套的for循环                                 |
+------------------------------------------------+----------------------+---------------------------------------------------------------+
| "permutations()"                               | p[, r]               | 长度r元组，所有可能的排列，无重复元素                         |
+------------------------------------------------+----------------------+---------------------------------------------------------------+
| "combinations()"                               | p, r                 | 长度r元组，有序，无重复元素                                   |
+------------------------------------------------+----------------------+---------------------------------------------------------------+
| "combinations_with_replacement()"              | p, r                 | 长度r元组，有序，元素可重复                                   |
+------------------------------------------------+----------------------+---------------------------------------------------------------+

+------------------------------------------------+---------------------------------------------------------------+
| 例子                                           | 结果                                                          |
|================================================|===============================================================|
| "product('ABCD', repeat=2)"                    | "AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD"             |
+------------------------------------------------+---------------------------------------------------------------+
| "permutations('ABCD', 2)"                      | "AB AC AD BA BC BD CA CB CD DA DB DC"                         |
+------------------------------------------------+---------------------------------------------------------------+
| "combinations('ABCD', 2)"                      | "AB AC AD BC BD CD"                                           |
+------------------------------------------------+---------------------------------------------------------------+
| "combinations_with_replacement('ABCD', 2)"     | "AA AB AC AD BB BC BD CC CD DD"                               |
+------------------------------------------------+---------------------------------------------------------------+


Itertool函数
============

下列模块函数均创建并返回迭代器。有些迭代器不限制输出流长度，所以它们只
应在能截断输出流的函数或循环中使用。

itertools.accumulate(iterable[, func, *, initial=None])

   创建一个迭代器，返回累积汇总值或其他双目运算函数的累积结果值（通过
   可选的 *func* 参数指定）。

   如果提供了 *func*，它应当为带有两个参数的函数。 输入 *iterable* 的
   元素可以是能被 *func* 接受为参数的任意类型。 （例如，对于默认的加法
   运算，元素可以是任何可相加的类型包括 "Decimal" 或 "Fraction"。）

   通常，输出的元素数量与输入的可迭代对象是一致的。 但是，如果提供了关
   键字参数 *initial*，则累加会以 *initial* 值开始，这样输出就比输入的
   可迭代对象多一个元素。

   大致相当于：

      def accumulate(iterable, func=operator.add, *, initial=None):
          'Return running totals'
          # accumulate([1,2,3,4,5]) --> 1 3 6 10 15
          # accumulate([1,2,3,4,5], initial=100) --> 100 101 103 106 110 115
          # accumulate([1,2,3,4,5], operator.mul) --> 1 2 6 24 120
          it = iter(iterable)
          total = initial
          if initial is None:
              try:
                  total = next(it)
              except StopIteration:
                  return
          yield total
          for element in it:
              total = func(total, element)
              yield total

   There are a number of uses for the *func* argument.  It can be set
   to "min()" for a running minimum, "max()" for a running maximum, or
   "operator.mul()" for a running product.  Amortization tables can be
   built by accumulating interest and applying payments:

      >>> data = [3, 4, 6, 2, 1, 9, 0, 7, 5, 8]
      >>> list(accumulate(data, operator.mul))     # running product
      [3, 12, 72, 144, 144, 1296, 0, 0, 0, 0]
      >>> list(accumulate(data, max))              # running maximum
      [3, 4, 6, 6, 6, 9, 9, 9, 9, 9]

      # Amortize a 5% loan of 1000 with 4 annual payments of 90
      >>> cashflows = [1000, -90, -90, -90, -90]
      >>> list(accumulate(cashflows, lambda bal, pmt: bal*1.05 + pmt))
      [1000, 960.0, 918.0, 873.9000000000001, 827.5950000000001]

   参考一个类似函数  "functools.reduce()"  ，它只返回一个最终累积值。

   在 3.2 版本加入.

   在 3.3 版本发生变更: 增加可选参数 *func* 。

   在 3.8 版本发生变更: 添加了可选的 *initial* 形参。

itertools.chain(*iterables)

   创建一个迭代器，它首先返回第一个可迭代对象中所有元素，接着返回下一
   个可迭代对象中所有元素，直到耗尽所有可迭代对象中的元素。可将多个序
   列处理为单个序列。大致相当于：

      def chain(*iterables):
          # chain('ABC', 'DEF') --> A B C D E F
          for it in iterables:
              for element in it:
                  yield element

classmethod chain.from_iterable(iterable)

   构建类似 "chain()" 迭代器的另一个选择。从一个单独的可迭代参数中得到
   链式输入，该参数是延迟计算的。大致相当于：

      def from_iterable(iterables):
          # chain.from_iterable(['ABC', 'DEF']) --> A B C D E F
          for it in iterables:
              for element in it:
                  yield element

itertools.combinations(iterable, r)

   返回由输入 *iterable* 中元素组成长度为 *r* 的子序列。

   The combination tuples are emitted in lexicographic ordering
   according to the order of the input *iterable*. So, if the input
   *iterable* is sorted, the output tuples will be produced in sorted
   order.

   Elements are treated as unique based on their position, not on
   their value.  So if the input elements are unique, there will be no
   repeated values in each combination.

   大致相当于：

      def combinations(iterable, r):
          # combinations('ABCD', 2) --> AB AC AD BC BD CD
          # combinations(range(4), 3) --> 012 013 023 123
          pool = tuple(iterable)
          n = len(pool)
          if r > n:
              return
          indices = list(range(r))
          yield tuple(pool[i] for i in indices)
          while True:
              for i in reversed(range(r)):
                  if indices[i] != i + n - r:
                      break
              else:
                  return
              indices[i] += 1
              for j in range(i+1, r):
                  indices[j] = indices[j-1] + 1
              yield tuple(pool[i] for i in indices)

   "combinations()" 的代码可被改写为 "permutations()" 过滤后的子序列，
   （相对于元素在输入中的位置）元素不是有序的。

      def combinations(iterable, r):
          pool = tuple(iterable)
          n = len(pool)
          for indices in permutations(range(n), r):
              if sorted(indices) == list(indices):
                  yield tuple(pool[i] for i in indices)

   当 "0 <= r <= n" 时，返回项的个数是 "n! / r! / (n-r)!"；当 "r > n"
   时，返回项个数为0。

itertools.combinations_with_replacement(iterable, r)

   返回由输入 *iterable* 中元素组成的长度为 *r* 的子序列，允许每个元素
   可重复出现。

   The combination tuples are emitted in lexicographic ordering
   according to the order of the input *iterable*. So, if the input
   *iterable* is sorted, the output tuples will be produced in sorted
   order.

   不同位置的元素是不同的，即使它们的值相同。因此如果输入中的元素都是
   不同的话，返回的组合中元素也都会不同。

   大致相当于：

      def combinations_with_replacement(iterable, r):
          # combinations_with_replacement('ABC', 2) --> AA AB AC BB BC CC
          pool = tuple(iterable)
          n = len(pool)
          if not n and r:
              return
          indices = [0] * r
          yield tuple(pool[i] for i in indices)
          while True:
              for i in reversed(range(r)):
                  if indices[i] != n - 1:
                      break
              else:
                  return
              indices[i:] = [indices[i] + 1] * (r - i)
              yield tuple(pool[i] for i in indices)

   "combinations_with_replacement()" 的代码可被改写为 "production()"
   过滤后的子序列，（相对于元素在输入中的位置）元素不是有序的。

      def combinations_with_replacement(iterable, r):
          pool = tuple(iterable)
          n = len(pool)
          for indices in product(range(n), repeat=r):
              if sorted(indices) == list(indices):
                  yield tuple(pool[i] for i in indices)

   当 "n > 0" 时，返回项个数为 "(n+r-1)! / r! / (n-1)!".

   在 3.1 版本加入.

itertools.compress(data, selectors)

   创建一个迭代器，它返回 *data* 中经 *selectors* 真值测试为 "True" 的
   元素。迭代器在两者较短的长度处停止。大致相当于：

      def compress(data, selectors):
          # compress('ABCDEF', [1,0,1,0,1,1]) --> A C E F
          return (d for d, s in zip(data, selectors) if s)

   在 3.1 版本加入.

itertools.count(start=0, step=1)

   创建一个迭代器，它从 *start* 值开始，返回均匀间隔的值。常用于
   "map()" 中的实参来生成连续的数据点。此外，还用于 "zip()" 来添加序列
   号。大致相当于：

      def count(start=0, step=1):
          # count(10) --> 10 11 12 13 14 ...
          # count(2.5, 0.5) --> 2.5 3.0 3.5 ...
          n = start
          while True:
              yield n
              n += step

   当对浮点数计数时，替换为乘法代码有时精度会更好，例如： "(start +
   step * i for i in count())" 。

   在 3.1 版本发生变更: 增加参数 *step* ，允许非整型。

itertools.cycle(iterable)

   创建一个迭代器，返回 *iterable* 中所有元素并保存一个副本。当取完
   *iterable* 中所有元素，返回副本中的所有元素。无限重复。大致相当于：

      def cycle(iterable):
          # cycle('ABCD') --> A B C D A B C D A B C D ...
          saved = []
          for element in iterable:
              yield element
              saved.append(element)
          while saved:
              for element in saved:
                    yield element

   注意，该函数可能需要相当大的辅助空间（取决于 *iterable* 的长度）。

itertools.dropwhile(predicate, iterable)

   创建一个迭代器，如果 *predicate* 为true，迭代器丢弃这些元素，然后返
   回其他元素。注意，迭代器在 *predicate* 首次为false之前不会产生任何
   输出，所以可能需要一定长度的启动时间。大致相当于：

      def dropwhile(predicate, iterable):
          # dropwhile(lambda x: x<5, [1,4,6,4,1]) --> 6 4 1
          iterable = iter(iterable)
          for x in iterable:
              if not predicate(x):
                  yield x
                  break
          for x in iterable:
              yield x

itertools.filterfalse(predicate, iterable)

   Make an iterator that filters elements from iterable returning only
   those for which the predicate is false. If *predicate* is "None",
   return the items that are false. Roughly equivalent to:

      def filterfalse(predicate, iterable):
          # filterfalse(lambda x: x%2, range(10)) --> 0 2 4 6 8
          if predicate is None:
              predicate = bool
          for x in iterable:
              if not predicate(x):
                  yield x

itertools.groupby(iterable, key=None)

   创建一个迭代器，返回 *iterable* 中连续的键和组。*key* 是一个计算元
   素键值函数。如果未指定或为 "None"，*key* 缺省为恒等函数（identity
   function），返回元素不变。一般来说，*iterable* 需用同一个键值函数预
   先排序。

   "groupby()" 操作类似于Unix中的 "uniq"。当每次 *key* 函数产生的键值
   改变时，迭代器会分组或生成一个新组（这就是为什么通常需要使用同一个
   键值函数先对数据进行排序）。这种行为与SQL的GROUP BY操作不同，SQL的
   操作会忽略输入的顺序将相同键值的元素分在同组中。

   返回的组本身也是一个迭代器，它与 "groupby()" 共享底层的可迭代对象。
   因为源是共享的，当 "groupby()" 对象向后迭代时，前一个组将消失。因此
   如果稍后还需要返回结果，可保存为列表：

      groups = []
      uniquekeys = []
      data = sorted(data, key=keyfunc)
      for k, g in groupby(data, keyfunc):
          groups.append(list(g))      # Store group iterator as a list
          uniquekeys.append(k)

   "groupby()" 大致相当于：

      class groupby:
          # [k for k, g in groupby('AAAABBBCCDAABBB')] --> A B C D A B
          # [list(g) for k, g in groupby('AAAABBBCCD')] --> AAAA BBB CC D

          def __init__(self, iterable, key=None):
              if key is None:
                  key = lambda x: x
              self.keyfunc = key
              self.it = iter(iterable)
              self.tgtkey = self.currkey = self.currvalue = object()

          def __iter__(self):
              return self

          def __next__(self):
              self.id = object()
              while self.currkey == self.tgtkey:
                  self.currvalue = next(self.it)    # Exit on StopIteration
                  self.currkey = self.keyfunc(self.currvalue)
              self.tgtkey = self.currkey
              return (self.currkey, self._grouper(self.tgtkey, self.id))

          def _grouper(self, tgtkey, id):
              while self.id is id and self.currkey == tgtkey:
                  yield self.currvalue
                  try:
                      self.currvalue = next(self.it)
                  except StopIteration:
                      return
                  self.currkey = self.keyfunc(self.currvalue)

itertools.islice(iterable, stop)
itertools.islice(iterable, start, stop[, step])

   Make an iterator that returns selected elements from the iterable.
   If *start* is non-zero, then elements from the iterable are skipped
   until start is reached. Afterward, elements are returned
   consecutively unless *step* is set higher than one which results in
   items being skipped.  If *stop* is "None", then iteration continues
   until the iterator is exhausted, if at all; otherwise, it stops at
   the specified position.

   如果 *start* 为 "None"，迭代从0开始。如果 *step* 为 "None" ，步长缺
   省为1。

   Unlike regular slicing, "islice()" does not support negative values
   for *start*, *stop*, or *step*.  Can be used to extract related
   fields from data where the internal structure has been flattened
   (for example, a multi-line report may list a name field on every
   third line).

   大致相当于：

      def islice(iterable, *args):
          # islice('ABCDEFG', 2) --> A B
          # islice('ABCDEFG', 2, 4) --> C D
          # islice('ABCDEFG', 2, None) --> C D E F G
          # islice('ABCDEFG', 0, None, 2) --> A C E G
          s = slice(*args)
          start, stop, step = s.start or 0, s.stop or sys.maxsize, s.step or 1
          it = iter(range(start, stop, step))
          try:
              nexti = next(it)
          except StopIteration:
              # Consume *iterable* up to the *start* position.
              for i, element in zip(range(start), iterable):
                  pass
              return
          try:
              for i, element in enumerate(iterable):
                  if i == nexti:
                      yield element
                      nexti = next(it)
          except StopIteration:
              # Consume to *stop*.
              for i, element in zip(range(i + 1, stop), iterable):
                  pass

itertools.pairwise(iterable)

   返回从输入 *iterable* 中获取的连续重叠对。

   输出迭代器中 2 元组的数量将比输入的数量少一个。 如果输入可迭代对象
   中少于两个值则它将为空。

   大致相当于：

      def pairwise(iterable):
          # pairwise('ABCDEFG') --> AB BC CD DE EF FG
          a, b = tee(iterable)
          next(b, None)
          return zip(a, b)

   在 3.10 版本加入.

itertools.permutations(iterable, r=None)

   连续返回由 *iterable* 元素生成长度为 *r* 的排列。

   如果 *r* 未指定或为 "None" ，*r* 默认设置为 *iterable* 的长度，这种
   情况下，生成所有全长排列。

   The permutation tuples are emitted in lexicographic order according
   to the order of the input *iterable*. So, if the input *iterable*
   is sorted, the output tuples will be produced in sorted order.

   Elements are treated as unique based on their position, not on
   their value.  So if the input elements are unique, there will be no
   repeated values within a permutation.

   大致相当于：

      def permutations(iterable, r=None):
          # permutations('ABCD', 2) --> AB AC AD BA BC BD CA CB CD DA DB DC
          # permutations(range(3)) --> 012 021 102 120 201 210
          pool = tuple(iterable)
          n = len(pool)
          r = n if r is None else r
          if r > n:
              return
          indices = list(range(n))
          cycles = list(range(n, n-r, -1))
          yield tuple(pool[i] for i in indices[:r])
          while n:
              for i in reversed(range(r)):
                  cycles[i] -= 1
                  if cycles[i] == 0:
                      indices[i:] = indices[i+1:] + indices[i:i+1]
                      cycles[i] = n - i
                  else:
                      j = cycles[i]
                      indices[i], indices[-j] = indices[-j], indices[i]
                      yield tuple(pool[i] for i in indices[:r])
                      break
              else:
                  return

   "permutations()" 的代码也可被改写为 "product()" 的子序列，只要将含
   有重复元素（来自输入中同一位置的）的项排除。

      def permutations(iterable, r=None):
          pool = tuple(iterable)
          n = len(pool)
          r = n if r is None else r
          for indices in product(range(n), repeat=r):
              if len(set(indices)) == r:
                  yield tuple(pool[i] for i in indices)

   当 "0 <= r <= n" ，返回项个数为 "n! / (n-r)!" ；当 "r > n" ，返回项
   个数为0。

itertools.product(*iterables, repeat=1)

   可迭代对象输入的笛卡儿积。

   大致相当于生成器表达式中的嵌套循环。例如， "product(A, B)" 和
   "((x,y) for x in A for y in B)" 返回结果一样。

   嵌套循环像里程表那样循环变动，每次迭代时将最右侧的元素向后迭代。这
   种模式形成了一种字典序，因此如果输入的可迭代对象是已排序的，笛卡尔
   积元组依次序发出。

   要计算可迭代对象自身的笛卡尔积，将可选参数 *repeat* 设定为要重复的
   次数。例如，"product(A, repeat=4)" 和 "product(A, A, A, A)" 是一样
   的。

   该函数大致相当于下面的代码，只不过实际实现方案不会在内存中创建中间
   结果。

      def product(*args, repeat=1):
          # product('ABCD', 'xy') --> Ax Ay Bx By Cx Cy Dx Dy
          # product(range(2), repeat=3) --> 000 001 010 011 100 101 110 111
          pools = [tuple(pool) for pool in args] * repeat
          result = [[]]
          for pool in pools:
              result = [x+[y] for x in result for y in pool]
          for prod in result:
              yield tuple(prod)

   在 "product()" 运行之前，它会完全耗尽输入的可迭代对象，在内存中保留
   值的临时池以生成结果积。 相应地，它只适用于有限的输入。

itertools.repeat(object[, times])

   Make an iterator that returns *object* over and over again. Runs
   indefinitely unless the *times* argument is specified.

   大致相当于：

      def repeat(object, times=None):
          # repeat(10, 3) --> 10 10 10
          if times is None:
              while True:
                  yield object
          else:
              for i in range(times):
                  yield object

   A common use for *repeat* is to supply a stream of constant values
   to *map* or *zip*:

      >>> list(map(pow, range(10), repeat(2)))
      [0, 1, 4, 9, 16, 25, 36, 49, 64, 81]

itertools.starmap(function, iterable)

   Make an iterator that computes the function using arguments
   obtained from the iterable.  Used instead of "map()" when argument
   parameters are already grouped in tuples from a single iterable
   (when the data has been "pre-zipped").

   The difference between "map()" and "starmap()" parallels the
   distinction between "function(a,b)" and "function(*c)". Roughly
   equivalent to:

      def starmap(function, iterable):
          # starmap(pow, [(2,5), (3,2), (10,3)]) --> 32 9 1000
          for args in iterable:
              yield function(*args)

itertools.takewhile(predicate, iterable)

   创建一个迭代器，只要 predicate 为真就从可迭代对象中返回元素。大致相
   当于:

      def takewhile(predicate, iterable):
          # takewhile(lambda x: x<5, [1,4,6,4,1]) --> 1 4
          for x in iterable:
              if predicate(x):
                  yield x
              else:
                  break

itertools.tee(iterable, n=2)

   从一个可迭代对象中返回 *n* 个独立的迭代器。

   The following Python code helps explain what *tee* does (although
   the actual implementation is more complex and uses only a single
   underlying FIFO (first-in, first-out) queue):

      def tee(iterable, n=2):
          it = iter(iterable)
          deques = [collections.deque() for i in range(n)]
          def gen(mydeque):
              while True:
                  if not mydeque:             # when the local deque is empty
                      try:
                          newval = next(it)   # fetch a new value and
                      except StopIteration:
                          return
                      for d in deques:        # load it to all the deques
                          d.append(newval)
                  yield mydeque.popleft()
          return tuple(gen(d) for d in deques)

   Once a "tee()" has been created, the original *iterable* should not
   be used anywhere else; otherwise, the *iterable* could get advanced
   without the tee objects being informed.

   "tee" 迭代器不是线程安全的。当同时使用由同一个 "tee()" 调用所返回的
   迭代器时可能引发 "RuntimeError"，即使原本的 *iterable* 是线程安全的
   。

   该迭代工具可能需要相当大的辅助存储空间（这取决于要保存多少临时数据
   ）。通常，如果一个迭代器在另一个迭代器开始之前就要使用大部份或全部
   数据，使用 "list()" 会比 "tee()" 更快。

itertools.zip_longest(*iterables, fillvalue=None)

   创建一个迭代器，从每个可迭代对象中收集元素。如果可迭代对象的长度未
   对齐，将根据 *fillvalue* 填充缺失值。迭代持续到耗光最长的可迭代对象
   。大致相当于：

      def zip_longest(*args, fillvalue=None):
          # zip_longest('ABCD', 'xy', fillvalue='-') --> Ax By C- D-
          iterators = [iter(it) for it in args]
          num_active = len(iterators)
          if not num_active:
              return
          while True:
              values = []
              for i, it in enumerate(iterators):
                  try:
                      value = next(it)
                  except StopIteration:
                      num_active -= 1
                      if not num_active:
                          return
                      iterators[i] = repeat(fillvalue)
                      value = fillvalue
                  values.append(value)
              yield tuple(values)

   如果其中一个可迭代对象有无限长度，"zip_longest()" 函数应封装在限制
   调用次数的场景中（例如 "islice()" 或 "takewhile()"）。除非指定，
   *fillvalue* 默认为 "None" 。


itertools 配方
==============

本节将展示如何使用现有的 itertools 作为基础构件来创建扩展的工具集。

The primary purpose of the itertools recipes is educational.  The
recipes show various ways of thinking about individual tools — for
example, that "chain.from_iterable" is related to the concept of
flattening.  The recipes also give ideas about ways that the tools can
be combined — for example, how "compress()" and "range()" can work
together.  The recipes also show patterns for using itertools with the
"operator" and "collections" modules as well as with the built-in
itertools such as "map()", "filter()", "reversed()", and
"enumerate()".

A secondary purpose of the recipes is to serve as an incubator.  The
"accumulate()", "compress()", and "pairwise()" itertools started out
as recipes.  Currently, the "iter_index()" recipe is being tested to
see whether it proves its worth.

基本上所有这些西方和许许多多其他的配方都可以通过 Python Package Index
上的 more-itertools 项目 来安装:

   python -m pip install more-itertools

Many of the recipes offer the same high performance as the underlying
toolset. Superior memory performance is kept by processing elements
one at a time rather than bringing the whole iterable into memory all
at once. Code volume is kept small by linking the tools together in a
functional style which helps eliminate temporary variables.  High
speed is retained by preferring "vectorized" building blocks over the
use of for-loops and *generator*s which incur interpreter overhead.

   import collections
   import math
   import operator
   import random

   def take(n, iterable):
       "Return first n items of the iterable as a list"
       return list(islice(iterable, n))

   def prepend(value, iterable):
       "Prepend a single value in front of an iterable"
       # prepend(1, [2, 3, 4]) --> 1 2 3 4
       return chain([value], iterable)

   def tabulate(function, start=0):
       "Return function(0), function(1), ..."
       return map(function, count(start))

   def tail(n, iterable):
       "Return an iterator over the last n items"
       # tail(3, 'ABCDEFG') --> E F G
       return iter(collections.deque(iterable, maxlen=n))

   def consume(iterator, n=None):
       "Advance the iterator n-steps ahead. If n is None, consume entirely."
       # Use functions that consume iterators at C speed.
       if n is None:
           # feed the entire iterator into a zero-length deque
           collections.deque(iterator, maxlen=0)
       else:
           # advance to the empty slice starting at position n
           next(islice(iterator, n, n), None)

   def nth(iterable, n, default=None):
       "Returns the nth item or a default value"
       return next(islice(iterable, n, None), default)

   def all_equal(iterable):
       "Returns True if all the elements are equal to each other"
       g = groupby(iterable)
       return next(g, True) and not next(g, False)

   def quantify(iterable, pred=bool):
       "Count how many times the predicate is True"
       return sum(map(pred, iterable))

   def ncycles(iterable, n):
       "Returns the sequence elements n times"
       return chain.from_iterable(repeat(tuple(iterable), n))

   def batched(iterable, n):
       "Batch data into tuples of length n. The last batch may be shorter."
       # batched('ABCDEFG', 3) --> ABC DEF G
       if n < 1:
           raise ValueError('n must be at least one')
       it = iter(iterable)
       while batch := tuple(islice(it, n)):
           yield batch

   def grouper(iterable, n, *, incomplete='fill', fillvalue=None):
       "Collect data into non-overlapping fixed-length chunks or blocks"
       # grouper('ABCDEFG', 3, fillvalue='x') --> ABC DEF Gxx
       # grouper('ABCDEFG', 3, incomplete='strict') --> ABC DEF ValueError
       # grouper('ABCDEFG', 3, incomplete='ignore') --> ABC DEF
       args = [iter(iterable)] * n
       if incomplete == 'fill':
           return zip_longest(*args, fillvalue=fillvalue)
       if incomplete == 'strict':
           return zip(*args, strict=True)
       if incomplete == 'ignore':
           return zip(*args)
       else:
           raise ValueError('Expected fill, strict, or ignore')

   def sumprod(vec1, vec2):
       "Compute a sum of products."
       return sum(starmap(operator.mul, zip(vec1, vec2, strict=True)))

   def sum_of_squares(it):
       "Add up the squares of the input values."
       # sum_of_squares([10, 20, 30]) -> 1400
       return sumprod(*tee(it))

   def transpose(it):
       "Swap the rows and columns of the input."
       # transpose([(1, 2, 3), (11, 22, 33)]) --> (1, 11) (2, 22) (3, 33)
       return zip(*it, strict=True)

   def matmul(m1, m2):
       "Multiply two matrices."
       # matmul([(7, 5), (3, 5)], [[2, 5], [7, 9]]) --> (49, 80), (41, 60)
       n = len(m2[0])
       return batched(starmap(sumprod, product(m1, transpose(m2))), n)

   def convolve(signal, kernel):
       # See:  https://betterexplained.com/articles/intuitive-convolution/
       # convolve(data, [0.25, 0.25, 0.25, 0.25]) --> Moving average (blur)
       # convolve(data, [1, -1]) --> 1st finite difference (1st derivative)
       # convolve(data, [1, -2, 1]) --> 2nd finite difference (2nd derivative)
       kernel = tuple(kernel)[::-1]
       n = len(kernel)
       window = collections.deque([0], maxlen=n) * n
       for x in chain(signal, repeat(0, n-1)):
           window.append(x)
           yield sumprod(kernel, window)

   def polynomial_from_roots(roots):
       """Compute a polynomial's coefficients from its roots.

          (x - 5) (x + 4) (x - 3)  expands to:   x³ -4x² -17x + 60
       """
       # polynomial_from_roots([5, -4, 3]) --> [1, -4, -17, 60]
       expansion = [1]
       for r in roots:
           expansion = convolve(expansion, (1, -r))
       return list(expansion)

   def polynomial_eval(coefficients, x):
       """Evaluate a polynomial at a specific value.

       Computes with better numeric stability than Horner's method.
       """
       # Evaluate x³ -4x² -17x + 60 at x = 2.5
       # polynomial_eval([1, -4, -17, 60], x=2.5) --> 8.125
       n = len(coefficients)
       if n == 0:
           return x * 0  # coerce zero to the type of x
       powers = map(pow, repeat(x), reversed(range(n)))
       return sumprod(coefficients, powers)

   def iter_index(iterable, value, start=0):
       "Return indices where a value occurs in a sequence or iterable."
       # iter_index('AABCADEAF', 'A') --> 0 1 4 7
       try:
           seq_index = iterable.index
       except AttributeError:
           # Slow path for general iterables
           it = islice(iterable, start, None)
           i = start - 1
           try:
               while True:
                   yield (i := i + operator.indexOf(it, value) + 1)
           except ValueError:
               pass
       else:
           # Fast path for sequences
           i = start - 1
           try:
               while True:
                   yield (i := seq_index(value, i+1))
           except ValueError:
               pass

   def sieve(n):
       "Primes less than n"
       # sieve(30) --> 2 3 5 7 11 13 17 19 23 29
       data = bytearray((0, 1)) * (n // 2)
       data[:3] = 0, 0, 0
       limit = math.isqrt(n) + 1
       for p in compress(range(limit), data):
           data[p*p : n : p+p] = bytes(len(range(p*p, n, p+p)))
       data[2] = 1
       return iter_index(data, 1) if n > 2 else iter([])

   def factor(n):
       "Prime factors of n."
       # factor(99) --> 3 3 11
       for prime in sieve(math.isqrt(n) + 1):
           while True:
               quotient, remainder = divmod(n, prime)
               if remainder:
                   break
               yield prime
               n = quotient
               if n == 1:
                   return
       if n > 1:
           yield n

   def flatten(list_of_lists):
       "Flatten one level of nesting"
       return chain.from_iterable(list_of_lists)

   def repeatfunc(func, times=None, *args):
       """Repeat calls to func with specified arguments.

       Example:  repeatfunc(random.random)
       """
       if times is None:
           return starmap(func, repeat(args))
       return starmap(func, repeat(args, times))

   def triplewise(iterable):
       "Return overlapping triplets from an iterable"
       # triplewise('ABCDEFG') --> ABC BCD CDE DEF EFG
       for (a, _), (b, c) in pairwise(pairwise(iterable)):
           yield a, b, c

   def sliding_window(iterable, n):
       # sliding_window('ABCDEFG', 4) --> ABCD BCDE CDEF DEFG
       it = iter(iterable)
       window = collections.deque(islice(it, n), maxlen=n)
       if len(window) == n:
           yield tuple(window)
       for x in it:
           window.append(x)
           yield tuple(window)

   def roundrobin(*iterables):
       "roundrobin('ABC', 'D', 'EF') --> A D E B F C"
       # Recipe credited to George Sakkis
       num_active = len(iterables)
       nexts = cycle(iter(it).__next__ for it in iterables)
       while num_active:
           try:
               for next in nexts:
                   yield next()
           except StopIteration:
               # Remove the iterator we just exhausted from the cycle.
               num_active -= 1
               nexts = cycle(islice(nexts, num_active))

   def partition(pred, iterable):
       "Use a predicate to partition entries into false entries and true entries"
       # partition(is_odd, range(10)) --> 0 2 4 6 8   and  1 3 5 7 9
       t1, t2 = tee(iterable)
       return filterfalse(pred, t1), filter(pred, t2)

   def before_and_after(predicate, it):
       """ Variant of takewhile() that allows complete
           access to the remainder of the iterator.

           >>> it = iter('ABCdEfGhI')
           >>> all_upper, remainder = before_and_after(str.isupper, it)
           >>> ''.join(all_upper)
           'ABC'
           >>> ''.join(remainder)     # takewhile() would lose the 'd'
           'dEfGhI'

           Note that the first iterator must be fully
           consumed before the second iterator can
           generate valid results.
       """
       it = iter(it)
       transition = []
       def true_iterator():
           for elem in it:
               if predicate(elem):
                   yield elem
               else:
                   transition.append(elem)
                   return
       def remainder_iterator():
           yield from transition
           yield from it
       return true_iterator(), remainder_iterator()

   def subslices(seq):
       "Return all contiguous non-empty subslices of a sequence"
       # subslices('ABCD') --> A AB ABC ABCD B BC BCD C CD D
       slices = starmap(slice, combinations(range(len(seq) + 1), 2))
       return map(operator.getitem, repeat(seq), slices)

   def powerset(iterable):
       "powerset([1,2,3]) --> () (1,) (2,) (3,) (1,2) (1,3) (2,3) (1,2,3)"
       s = list(iterable)
       return chain.from_iterable(combinations(s, r) for r in range(len(s)+1))

   def unique_everseen(iterable, key=None):
       "List unique elements, preserving order. Remember all elements ever seen."
       # unique_everseen('AAAABBBCCDAABBB') --> A B C D
       # unique_everseen('ABBcCAD', str.lower) --> A B c D
       seen = set()
       if key is None:
           for element in filterfalse(seen.__contains__, iterable):
               seen.add(element)
               yield element
           # For order preserving deduplication,
           # a faster but non-lazy solution is:
           #     yield from dict.fromkeys(iterable)
       else:
           for element in iterable:
               k = key(element)
               if k not in seen:
                   seen.add(k)
                   yield element
           # For use cases that allow the last matching element to be returned,
           # a faster but non-lazy solution is:
           #      t1, t2 = tee(iterable)
           #      yield from dict(zip(map(key, t1), t2)).values()

   def unique_justseen(iterable, key=None):
       "List unique elements, preserving order. Remember only the element just seen."
       # unique_justseen('AAAABBBCCDAABBB') --> A B C D A B
       # unique_justseen('ABBcCAD', str.lower) --> A B c A D
       return map(next, map(operator.itemgetter(1), groupby(iterable, key)))

   def iter_except(func, exception, first=None):
       """ Call a function repeatedly until an exception is raised.

       Converts a call-until-exception interface to an iterator interface.
       Like builtins.iter(func, sentinel) but uses an exception instead
       of a sentinel to end the loop.

       Examples:
           iter_except(functools.partial(heappop, h), IndexError)   # priority queue iterator
           iter_except(d.popitem, KeyError)                         # non-blocking dict iterator
           iter_except(d.popleft, IndexError)                       # non-blocking deque iterator
           iter_except(q.get_nowait, Queue.Empty)                   # loop over a producer Queue
           iter_except(s.pop, KeyError)                             # non-blocking set iterator

       """
       try:
           if first is not None:
               yield first()            # For database APIs needing an initial cast to db.first()
           while True:
               yield func()
       except exception:
           pass

   def first_true(iterable, default=False, pred=None):
       """Returns the first true value in the iterable.

       If no true value is found, returns *default*

       If *pred* is not None, returns the first item
       for which pred(item) is true.

       """
       # first_true([a,b,c], x) --> a or b or c or x
       # first_true([a,b], x, f) --> a if f(a) else b if f(b) else x
       return next(filter(pred, iterable), default)

   def nth_combination(iterable, r, index):
       "Equivalent to list(combinations(iterable, r))[index]"
       pool = tuple(iterable)
       n = len(pool)
       c = math.comb(n, r)
       if index < 0:
           index += c
       if index < 0 or index >= c:
           raise IndexError
       result = []
       while r:
           c, n, r = c*r//n, n-1, r-1
           while index >= c:
               index -= c
               c, n = c*(n-r)//n, n-1
           result.append(pool[-1-n])
       return tuple(result)
