readline — GNU readline interface


Модуль readline визначає низку функцій для полегшення завершення та читання/запису файлів історії з інтерпретатора Python. Цей модуль можна використовувати безпосередньо або через модуль rlcompleter, який підтримує завершення ідентифікаторів Python за інтерактивним запитом. Параметри, зроблені за допомогою цього модуля, впливають на поведінку як інтерактивної підказки інтерпретатора, так і підказок, запропонованих вбудованою функцією input().

Readline keybindings may be configured via an initialization file, typically .inputrc in your home directory. See Readline Init File in the GNU Readline manual for information about the format and allowable constructs of that file, and the capabilities of the Readline library in general.

Availability: not Android, not iOS, not WASI.

This module is not supported on mobile platforms or WebAssembly platforms.

Примітка

The underlying Readline library API may be implemented by the editline (libedit) library instead of GNU readline. On macOS the readline module detects which library is being used at run time.

The configuration file for editline is different from that of GNU readline. If you programmatically load configuration strings you can use backend to determine which library is being used.

If you use editline/libedit readline emulation on macOS, the initialization file located in your home directory is named .editrc. For example, the following content in ~/.editrc will turn ON vi keybindings and TAB completion:

python:bind -v
python:bind ^I rl_complete

Also note that different libraries may use different history file formats. When switching the underlying library, existing history files may become unusable.

readline.backend

The name of the underlying Readline library being used, either "readline" or "editline".

Added in version 3.13.

Ініціальний файл

Наступні функції стосуються файлу ініціалізації та конфігурації користувача:

readline.parse_and_bind(string)

Execute the init line provided in the string argument. This calls rl_parse_and_bind() in the underlying library.

readline.read_init_file([filename])

Execute a readline initialization file. The default filename is the last filename used. This calls rl_read_init_file() in the underlying library.

Лінійний буфер

На буфері лінії працюють такі функції:

readline.get_line_buffer()

Return the current contents of the line buffer (rl_line_buffer in the underlying library).

readline.insert_text(string)

Insert text into the line buffer at the cursor position. This calls rl_insert_text() in the underlying library, but ignores the return value.

readline.redisplay()

Change what’s displayed on the screen to reflect the current contents of the line buffer. This calls rl_redisplay() in the underlying library.

Файл історії

З файлом історії працюють такі функції:

readline.read_history_file([filename])

Load a readline history file, and append it to the history list. The default filename is ~/.history. This calls read_history() in the underlying library.

readline.write_history_file([filename])

Save the history list to a readline history file, overwriting any existing file. The default filename is ~/.history. This calls write_history() in the underlying library.

readline.append_history_file(nelements[, filename])

Append the last nelements items of history to a file. The default filename is ~/.history. The file must already exist. This calls append_history() in the underlying library. This function only exists if Python was compiled for a version of the library that supports it.

Added in version 3.5.

readline.get_history_length()
readline.set_history_length(length)

Set or return the desired number of lines to save in the history file. The write_history_file() function uses this value to truncate the history file, by calling history_truncate_file() in the underlying library. Negative values imply unlimited history file size.

Список історії

У списку глобальної історії працюють такі функції:

readline.clear_history()

Clear the current history. This calls clear_history() in the underlying library. The Python function only exists if Python was compiled for a version of the library that supports it.

readline.get_current_history_length()

Повертає кількість елементів в історії. (Це відрізняється від get_history_length(), який повертає максимальну кількість рядків, які будуть записані у файл історії.)

readline.get_history_item(index)

Return the current contents of history item at index. The item index is one-based. This calls history_get() in the underlying library.

readline.remove_history_item(pos)

Remove history item specified by its position from the history. The position is zero-based. This calls remove_history() in the underlying library.

readline.replace_history_item(pos, line)

Replace history item specified by its position with line. The position is zero-based. This calls replace_history_entry() in the underlying library.

readline.add_history(line)

Append line to the history buffer, as if it was the last line typed. This calls add_history() in the underlying library.

readline.set_auto_history(enabled)

Enable or disable automatic calls to add_history() when reading input via readline. The enabled argument should be a Boolean value that when true, enables auto history, and that when false, disables auto history.

Added in version 3.6.

Деталі реалізації CPython: Auto history is enabled by default, and changes to this do not persist across multiple sessions.

Хуки для запуску

readline.set_startup_hook([function])

Set or remove the function invoked by the rl_startup_hook callback of the underlying library. If function is specified, it will be used as the new hook function; if omitted or None, any function already installed is removed. The hook is called with no arguments just before readline prints the first prompt.

readline.set_pre_input_hook([function])

Set or remove the function invoked by the rl_pre_input_hook callback of the underlying library. If function is specified, it will be used as the new hook function; if omitted or None, any function already installed is removed. The hook is called with no arguments after the first prompt has been printed and just before readline starts reading input characters. This function only exists if Python was compiled for a version of the library that supports it.

Завершення

Наступні функції стосуються реалізації спеціальної функції доповнення слів. Зазвичай це працює за допомогою клавіші Tab і може пропонувати та автоматично завершувати введене слово. За замовчуванням Readline налаштовано на використання rlcompleter для заповнення ідентифікаторів Python для інтерактивного інтерпретатора. Якщо модуль readline використовуватиметься з настроюваним доповнювачем, слід встановити інший набір розділювачів слів.

readline.set_completer([function])

Встановити або видалити функцію завершення. Якщо вказано функцію, вона використовуватиметься як нова функція завершення; якщо опущено або None, усі вже встановлені завершальні функції видаляються. Функція завершення викликається як function(text, state) для state в 0, 1, 2, …, доки вона не поверне не- значення рядка. Він має повернути наступне можливе завершення, починаючи з тексту.

The installed completer function is invoked by the entry_func callback passed to rl_completion_matches() in the underlying library. The text string comes from the first parameter to the rl_attempted_completion_function callback of the underlying library.

readline.get_completer()

Отримайте функцію завершувача або None, якщо функцію завершувача не встановлено.

readline.get_completion_type()

Get the type of completion being attempted. This returns the rl_completion_type variable in the underlying library as an integer.

readline.get_begidx()
readline.get_endidx()

Get the beginning or ending index of the completion scope. These indexes are the start and end arguments passed to the rl_attempted_completion_function callback of the underlying library. The values may be different in the same input editing scenario based on the underlying C readline implementation. Ex: libedit is known to behave differently than libreadline.

readline.set_completer_delims(string)
readline.get_completer_delims()

Set or get the word delimiters for completion. These determine the start of the word to be considered for completion (the completion scope). These functions access the rl_completer_word_break_characters variable in the underlying library.

readline.set_completion_display_matches_hook([function])

Set or remove the completion display function. If function is specified, it will be used as the new completion display function; if omitted or None, any completion display function already installed is removed. This sets or clears the rl_completion_display_matches_hook callback in the underlying library. The completion display function is called as function(substitution, [matches], longest_match_length) once each time matches need to be displayed.

приклад

У наступному прикладі показано, як використовувати функції читання та запису історії модуля readline для автоматичного завантаження та збереження файлу історії під назвою .python_history з домашнього каталогу користувача. Наведений нижче код зазвичай виконується автоматично під час інтерактивних сеансів із файлу користувача PYTHONSTARTUP.

import atexit
import os
import readline

histfile = os.path.join(os.path.expanduser("~"), ".python_history")
try:
    readline.read_history_file(histfile)
    # default history len is -1 (infinite), which may grow unruly
    readline.set_history_length(1000)
except FileNotFoundError:
    pass

atexit.register(readline.write_history_file, histfile)

Цей код насправді запускається автоматично, коли Python запускається в інтерактивному режимі (див. Конфігурація Readline).

Наступний приклад досягає тієї ж мети, але підтримує одночасні інтерактивні сеанси, лише додаючи нову історію.

import atexit
import os
import readline
histfile = os.path.join(os.path.expanduser("~"), ".python_history")

try:
    readline.read_history_file(histfile)
    h_len = readline.get_current_history_length()
except FileNotFoundError:
    open(histfile, 'wb').close()
    h_len = 0

def save(prev_h_len, histfile):
    new_h_len = readline.get_current_history_length()
    readline.set_history_length(1000)
    readline.append_history_file(new_h_len - prev_h_len, histfile)
atexit.register(save, h_len, histfile)

Наступний приклад розширює клас code.InteractiveConsole для підтримки збереження/відновлення історії.

import atexit
import code
import os
import readline

class HistoryConsole(code.InteractiveConsole):
    def __init__(self, locals=None, filename="<console>",
                 histfile=os.path.expanduser("~/.console-history")):
        code.InteractiveConsole.__init__(self, locals, filename)
        self.init_history(histfile)

    def init_history(self, histfile):
        readline.parse_and_bind("tab: complete")
        if hasattr(readline, "read_history_file"):
            try:
                readline.read_history_file(histfile)
            except FileNotFoundError:
                pass
            atexit.register(self.save_history, histfile)

    def save_history(self, histfile):
        readline.set_history_length(1000)
        readline.write_history_file(histfile)