traceback — Print or retrieve a stack traceback

Вихідний код: Lib/traceback.py


This module provides a standard interface to extract, format and print stack traces of Python programs. It exactly mimics the behavior of the Python interpreter when it prints a stack trace. This is useful when you want to print stack traces under program control, such as in a «wrapper» around the interpreter.

The module uses traceback objects — this is the object type that is stored in the sys.last_traceback variable and returned as the third item from sys.exc_info().

Дивись також

Module faulthandler

Used to dump Python tracebacks explicitly, on a fault, after a timeout, or on a user signal.

Module pdb

Interactive source code debugger for Python programs.

The module defines the following functions:

traceback.print_tb(tb, limit=None, file=None)

Print up to limit stack trace entries from traceback object tb (starting from the caller’s frame) if limit is positive. Otherwise, print the last abs(limit) entries. If limit is omitted or None, all entries are printed. If file is omitted or None, the output goes to sys.stderr; otherwise it should be an open file or file-like object to receive the output.

Змінено в версії 3.5: Додано підтримку негативного ліміту.

traceback.print_exception(exc, /, [value, tb, ]limit=None, file=None, chain=True)

Print exception information and stack trace entries from traceback object tb to file. This differs from print_tb() in the following ways:

  • якщо tb не є None, він друкує заголовок Traceback (останній останній виклик):

  • він друкує тип винятку та значення після трасування стека

  • якщо type(value) дорівнює SyntaxError і value має відповідний формат, він друкує рядок, у якому сталася синтаксична помилка, із кареткою, що вказує на приблизну позицію помилки.

Починаючи з Python 3.10, замість передачі value і tb об’єкт винятку можна передати як перший аргумент. Якщо надано value і tb, перший аргумент ігнорується, щоб забезпечити зворотну сумісність.

The optional limit argument has the same meaning as for print_tb(). If chain is true (the default), then chained exceptions (the __cause__ or __context__ attributes of the exception) will be printed as well, like the interpreter itself does when printing an unhandled exception.

Змінено в версії 3.5: Аргумент etype ігнорується та виводиться з типу value.

Змінено в версії 3.10: Параметр etype було перейменовано на exc і тепер є лише позиційним.

traceback.print_exc(limit=None, file=None, chain=True)

This is a shorthand for print_exception(*sys.exc_info(), limit, file, chain).

traceback.print_last(limit=None, file=None, chain=True)

This is a shorthand for print_exception(sys.last_type, sys.last_value, sys.last_traceback, limit, file, chain). In general it will work only after an exception has reached an interactive prompt (see sys.last_type).

traceback.print_stack(f=None, limit=None, file=None)

Print up to limit stack trace entries (starting from the invocation point) if limit is positive. Otherwise, print the last abs(limit) entries. If limit is omitted or None, all entries are printed. The optional f argument can be used to specify an alternate stack frame to start. The optional file argument has the same meaning as for print_tb().

Змінено в версії 3.5: Додано підтримку негативного ліміту.

traceback.extract_tb(tb, limit=None)

Return a StackSummary object representing a list of «pre-processed» stack trace entries extracted from the traceback object tb. It is useful for alternate formatting of stack traces. The optional limit argument has the same meaning as for print_tb(). A «pre-processed» stack trace entry is a FrameSummary object containing attributes filename, lineno, name, and line representing the information that is usually printed for a stack trace. The line is a string with leading and trailing whitespace stripped; if the source is not available it is None.

traceback.extract_stack(f=None, limit=None)

Extract the raw traceback from the current stack frame. The return value has the same format as for extract_tb(). The optional f and limit arguments have the same meaning as for print_stack().

traceback.format_list(extracted_list)

За наявності списку кортежів або об’єктів FrameSummary, які повертає extract_tb() або extract_stack(), повертає список рядків, готових до друку. Кожен рядок у результуючому списку відповідає елементу з таким же індексом у списку аргументів. Кожен рядок закінчується символом нового рядка; рядки також можуть містити внутрішні символи нового рядка для тих елементів, вихідний текстовий рядок яких не None.

traceback.format_exception_only(exc, /[, value])

Format the exception part of a traceback using an exception value such as given by sys.last_value. The return value is a list of strings, each ending in a newline. Normally, the list contains a single string; however, for SyntaxError exceptions, it contains several lines that (when printed) display detailed information about where the syntax error occurred. The message indicating which exception occurred is the always last string in the list.

Починаючи з Python 3.10, замість передачі значення як перший аргумент можна передати об’єкт винятку. Якщо вказано значення, перший аргумент ігнорується, щоб забезпечити зворотну сумісність.

Змінено в версії 3.10: Параметр etype було перейменовано на exc і тепер є лише позиційним.

traceback.format_exception(exc, /, [value, tb, ]limit=None, chain=True)

Відформатуйте трасування стека та інформацію про винятки. Аргументи мають те саме значення, що й відповідні аргументи print_exception(). Повернене значення — це список рядків, кожен із яких закінчується знаком нового рядка, а деякі містять внутрішні нові рядки. Коли ці рядки об’єднуються та друкуються, друкується точно такий же текст, як і print_exception().

Змінено в версії 3.5: Аргумент etype ігнорується та виводиться з типу value.

Змінено в версії 3.10: Поведінку та підпис цієї функції було змінено відповідно до print_exception().

traceback.format_exc(limit=None, chain=True)

Це схоже на print_exc(limit), але повертає рядок замість друку у файл.

traceback.format_tb(tb, limit=None)

Скорочення для format_list(extract_tb(tb, limit)).

traceback.format_stack(f=None, limit=None)

Скорочення для format_list(extract_stack(f, limit)).

traceback.clear_frames(tb)

Clears the local variables of all the stack frames in a traceback tb by calling the clear() method of each frame object.

Нове в версії 3.4.

traceback.walk_stack(f)

Walk a stack following f.f_back from the given frame, yielding the frame and line number for each frame. If f is None, the current stack is used. This helper is used with StackSummary.extract().

Нове в версії 3.5.

traceback.walk_tb(tb)

Walk a traceback following tb_next yielding the frame and line number for each frame. This helper is used with StackSummary.extract().

Нове в версії 3.5.

The module also defines the following classes:

TracebackException Objects

Нове в версії 3.5.

TracebackException objects are created from actual exceptions to capture data for later printing in a lightweight fashion.

class traceback.TracebackException(exc_type, exc_value, exc_traceback, *, limit=None, lookup_lines=True, capture_locals=False, compact=False)

Зафіксуйте виняток для подальшого рендерингу. limit, lookup_lines і capture_locals такі ж, як і для класу StackSummary.

If compact is true, only data that is required by TracebackException’s format method is saved in the class attributes. In particular, the __context__ field is calculated only if __cause__ is None and __suppress_context__ is false.

Зауважте, що коли місцеві жителі захоплені, вони також відображаються в трасуванні.

__cause__

A TracebackException of the original __cause__.

__context__

A TracebackException of the original __context__.

__suppress_context__

The __suppress_context__ value from the original exception.

stack

StackSummary, що представляє відстеження.

exc_type

Клас оригінального трасування.

filename

Для синтаксичних помилок - ім’я файлу, де сталася помилка.

lineno

Для синтаксичних помилок - номер рядка, де сталася помилка.

end_lineno

For syntax errors - the end line number where the error occurred. Can be None if not present.

Нове в версії 3.10.

text

Для синтаксичних помилок - текст, де сталася помилка.

offset

Для синтаксичних помилок - зміщення в тексті, де сталася помилка.

end_offset

For syntax errors - the end offset into the text where the error occurred. Can be None if not present.

Нове в версії 3.10.

msg

Для синтаксичних помилок - повідомлення про помилку компілятора.

classmethod from_exception(exc, *, limit=None, lookup_lines=True, capture_locals=False)

Зафіксуйте виняток для подальшого рендерингу. limit, lookup_lines і capture_locals такі ж, як і для класу StackSummary.

Зауважте, що коли місцеві жителі захоплені, вони також відображаються в трасуванні.

format(*, chain=True)

Відформатувати виняток.

If chain is not True, __cause__ and __context__ will not be formatted.

Повернене значення є генератором рядків, кожен із яких закінчується символом нового рядка, а деякі містять внутрішні нові рядки. print_exception() є обгорткою цього методу, яка просто друкує рядки у файл.

The message indicating which exception occurred is always the last string in the output.

format_exception_only()

Відформатуйте частину винятку зворотного відстеження.

Повернене значення є генератором рядків, кожен із яких закінчується символом нового рядка.

Normally, the generator emits a single string; however, for SyntaxError exceptions, it emits several lines that (when printed) display detailed information about where the syntax error occurred.

The message indicating which exception occurred is always the last string in the output.

Змінено в версії 3.10: Додано параметр compact.

StackSummary Objects

Нове в версії 3.5.

StackSummary objects represent a call stack ready for formatting.

class traceback.StackSummary
classmethod extract(frame_gen, *, limit=None, lookup_lines=True, capture_locals=False)

Construct a StackSummary object from a frame generator (such as is returned by walk_stack() or walk_tb()).

If limit is supplied, only this many frames are taken from frame_gen. If lookup_lines is False, the returned FrameSummary objects will not have read their lines in yet, making the cost of creating the StackSummary cheaper (which may be valuable if it may not actually get formatted). If capture_locals is True the local variables in each FrameSummary are captured as object representations.

classmethod from_list(a_list)

Construct a StackSummary object from a supplied list of FrameSummary objects or old-style list of tuples. Each tuple should be a 4-tuple with filename, lineno, name, line as the elements.

format()

Returns a list of strings ready for printing. Each string in the resulting list corresponds to a single frame from the stack. Each string ends in a newline; the strings may contain internal newlines as well, for those items with source text lines.

Для довгих послідовностей того самого кадру та рядка відображаються перші кілька повторів, за якими йде підсумковий рядок із зазначенням точної кількості подальших повторень.

Змінено в версії 3.6: Довгі послідовності повторюваних кадрів тепер скорочуються.

FrameSummary Objects

Нове в версії 3.5.

FrameSummary objects represent a single frame in a traceback.

class traceback.FrameSummary(filename, lineno, name, lookup_line=True, locals=None, line=None)

Represent a single frame in the traceback or stack that is being formatted or printed. It may optionally have a stringified version of the frames locals included in it. If lookup_line is False, the source code is not looked up until the FrameSummary has the line attribute accessed (which also happens when casting it to a tuple). line may be directly provided, and will prevent line lookups happening at all. locals is an optional local variable dictionary, and if supplied the variable representations are stored in the summary for later display.

Traceback Examples

Цей простий приклад реалізує базовий цикл читання-оцінки-друку, подібний (але менш корисний, ніж) стандартний інтерактивний цикл інтерпретатора Python. Для більш повної реалізації циклу інтерпретатора зверніться до модуля code.

import sys, traceback

def run_user_code(envdir):
    source = input(">>> ")
    try:
        exec(source, envdir)
    except Exception:
        print("Exception in user code:")
        print("-"*60)
        traceback.print_exc(file=sys.stdout)
        print("-"*60)

envdir = {}
while True:
    run_user_code(envdir)

У наступному прикладі демонструються різні способи друку та форматування винятку та зворотного відстеження:

import sys, traceback

def lumberjack():
    bright_side_of_life()

def bright_side_of_life():
    return tuple()[0]

try:
    lumberjack()
except IndexError:
    exc_type, exc_value, exc_traceback = sys.exc_info()
    print("*** print_tb:")
    traceback.print_tb(exc_traceback, limit=1, file=sys.stdout)
    print("*** print_exception:")
    traceback.print_exception(exc_value, limit=2, file=sys.stdout)
    print("*** print_exc:")
    traceback.print_exc(limit=2, file=sys.stdout)
    print("*** format_exc, first and last line:")
    formatted_lines = traceback.format_exc().splitlines()
    print(formatted_lines[0])
    print(formatted_lines[-1])
    print("*** format_exception:")
    print(repr(traceback.format_exception(exc_value)))
    print("*** extract_tb:")
    print(repr(traceback.extract_tb(exc_traceback)))
    print("*** format_tb:")
    print(repr(traceback.format_tb(exc_traceback)))
    print("*** tb_lineno:", exc_traceback.tb_lineno)

Вихід для прикладу виглядатиме приблизно так:

*** print_tb:
  File "<doctest...>", line 10, in <module>
    lumberjack()
*** print_exception:
Traceback (most recent call last):
  File "<doctest...>", line 10, in <module>
    lumberjack()
  File "<doctest...>", line 4, in lumberjack
    bright_side_of_life()
IndexError: tuple index out of range
*** print_exc:
Traceback (most recent call last):
  File "<doctest...>", line 10, in <module>
    lumberjack()
  File "<doctest...>", line 4, in lumberjack
    bright_side_of_life()
IndexError: tuple index out of range
*** format_exc, first and last line:
Traceback (most recent call last):
IndexError: tuple index out of range
*** format_exception:
['Traceback (most recent call last):\n',
 '  File "<doctest...>", line 10, in <module>\n    lumberjack()\n',
 '  File "<doctest...>", line 4, in lumberjack\n    bright_side_of_life()\n',
 '  File "<doctest...>", line 7, in bright_side_of_life\n    return tuple()[0]\n',
 'IndexError: tuple index out of range\n']
*** extract_tb:
[<FrameSummary file <doctest...>, line 10 in <module>>,
 <FrameSummary file <doctest...>, line 4 in lumberjack>,
 <FrameSummary file <doctest...>, line 7 in bright_side_of_life>]
*** format_tb:
['  File "<doctest...>", line 10, in <module>\n    lumberjack()\n',
 '  File "<doctest...>", line 4, in lumberjack\n    bright_side_of_life()\n',
 '  File "<doctest...>", line 7, in bright_side_of_life\n    return tuple()[0]\n']
*** tb_lineno: 10

У наступному прикладі показано різні способи друку та форматування стосу:

>>> import traceback
>>> def another_function():
...     lumberstack()
...
>>> def lumberstack():
...     traceback.print_stack()
...     print(repr(traceback.extract_stack()))
...     print(repr(traceback.format_stack()))
...
>>> another_function()
  File "<doctest>", line 10, in <module>
    another_function()
  File "<doctest>", line 3, in another_function
    lumberstack()
  File "<doctest>", line 6, in lumberstack
    traceback.print_stack()
[('<doctest>', 10, '<module>', 'another_function()'),
 ('<doctest>', 3, 'another_function', 'lumberstack()'),
 ('<doctest>', 7, 'lumberstack', 'print(repr(traceback.extract_stack()))')]
['  File "<doctest>", line 10, in <module>\n    another_function()\n',
 '  File "<doctest>", line 3, in another_function\n    lumberstack()\n',
 '  File "<doctest>", line 8, in lumberstack\n    print(repr(traceback.format_stack()))\n']

Цей останній приклад демонструє кілька останніх функцій форматування:

>>> import traceback
>>> traceback.format_list([('spam.py', 3, '<module>', 'spam.eggs()'),
...                        ('eggs.py', 42, 'eggs', 'return "bacon"')])
['  File "spam.py", line 3, in <module>\n    spam.eggs()\n',
 '  File "eggs.py", line 42, in eggs\n    return "bacon"\n']
>>> an_error = IndexError('tuple index out of range')
>>> traceback.format_exception_only(type(an_error), an_error)
['IndexError: tuple index out of range\n']