Giriş
*****

The Python standard library consists of a collection of modules. There
are many ways to dissect this collection.  Most modules are written in
Python, but some are written in C. All can be imported into your
program to add functionality.  Some modules provide interfaces that
are highly specific to Python, like printing a stack trace; some
provide interfaces that are specific to particular operating systems,
such as access to specific hardware; others provide interfaces that
are specific to a particular application domain, like web development.
Some modules are available in all versions and ports of Python; others
are only available when the underlying system supports or requires
them; yet others are available only when a particular configuration
option was chosen at the time when Python was compiled and installed.

If you start reading this manual from the start, and skip to the next
chapter when you get bored, you will get a reasonable overview of the
available modules and application areas that are supported by the
Python library.  Of course, you don't *have* to read it like a novel
--- you can also browse the table of contents (in front of the
manual), or look for a specific function, module or term in the index
(in the back).  And finally, if you enjoy learning about random
subjects, you choose a random page and read a section or two.
Regardless of the order in which you read the sections of this manual,
it helps to first read Built-in functions, as the remainder of this
section assumes familiarity with this material.

Ayrıca bakınız:

  The built-in functions and classes (which can be used without an
  "import" statement) are described in Python built-ins reference.


Kullanılabilirlik hakkında notlar
=================================

* "Kullanılabilirlik: Unix" notu, bu fonksiyonun Unix sistemlerinde
  yaygın olarak bulunduğu anlamına gelir.  Belirli bir işletim
  sistemindeki varlığı hakkında herhangi bir iddiada bulunmaz.

* If not separately noted, all functions that claim "Availability:
  Unix" are supported on macOS, iOS and Android, all of which build on
  a Unix core.

* Bir kullanılabilirlik notu hem minimum Çekirdek(Kernel) sürümü hem
  de minimum libc sürümü içeriyorsa, her iki koşul da geçerli
  olmalıdır. Örneğin *Availability: Linux >= 3.17 with glibc >= 2.27*
  notuna sahip bir özellik için hem Linux 3.17 veya daha yeni hem de
  glibc 2.27 veya daha yeni olması gerekir.


WebAssembly platformları
------------------------

WebAssembly platformları "wasm32-emscripten" (Emscripten) ve
"wasm32-wasi" (WASI) POSIX API`lerinin bir alt kümesini sağlar.
WebAssembly çalışma zamanları ve tarayıcıları korumalıdır ve ana
bilgisayara ve harici kaynaklara sınırlı erişime sahiptir. Süreçler,
iş parçacığı, ağ, sinyaller veya diğer süreçler arası iletişim (IPC)
biçimlerini kullanan herhangi bir Python standart kütüphane modülü ya
mevcut değildir ya da diğer Unix benzeri sistemlerde olduğu gibi
çalışmayabilir. Dosya I/O, dosya sistemi ve Unix izinleriyle ilgili
işlevler de kısıtlanmıştır. Emscripten bloklama I/O'ye izin vermez.
"sleep()" gibi diğer engelleme işlemleri tarayıcı olay döngüsünü
engeller.

Python'un WebAssembly platformlarındaki özellikleri ve davranışı
Emscripten-SDK veya WASI-SDK sürümüne, WASM çalışma zamanlarına
(tarayıcı, NodeJS, wasmtime) ve Python derleme zamanı
bayraklarına(build time flags) bağlıdır. WebAssembly, Emscripten ve
WASI gelişmekte olan standartlardır; ağ oluşturma gibi bazı özellikler
gelecekte desteklenebilir.

Tarayıcıda Python için kullanıcılar Pyodide veya PyScript'i
düşünmelidir. PyScript, kendisi de CPython ve Emscripten üzerine inşa
edilmiş olan Pyodide üzerine kurulmuştur. Pyodide, tarayıcıların
JavaScript ve DOM API'lerine erişimin yanı sıra JavaScript'in
"XMLHttpRequest" ve "Fetch" API'leri ile sınırlı ağ yetenekleri
sağlar.

* Süreçle ilgili API'ler kullanılamaz veya her zaman bir hata ile
  başarısız olur. Bu, yeni süreçler oluşturan ("fork()", "execve()"),
  süreçleri bekleyen ("waitpid()"), sinyal gönderen ("kill()") veya
  süreçlerle başka şekilde etkileşime giren API'leri içerir.
  "subprocess" içe aktarılabilir ancak çalışmaz.

* "socket" modülü mevcuttur, ancak sınırlıdır ve diğer platformlardan
  farklı davranır. Emscripten üzerinde, soketler her zaman bloklama
  yapmaz ve WebSockets aracılığıyla TCP'yi proxy'lemek için sunucuda
  ek JavaScript kodu ve yardımcılar gerektirir; daha fazla bilgi için
  Emscripten Networking bölümüne bakın. WASI anlık görüntü önizleme 1,
  yalnızca mevcut bir dosya tanımlayıcısından soketlere izin verir.

* Bazı fonksiyonlar hiçbir şey yapmayan ve her zaman sabit kodlanmış
  değerler döndüren taslaklardır.

* Dosya tanımlayıcıları, dosya izinleri, dosya sahipliği ve
  bağlantılarla ilgili işlevler sınırlıdır ve bazı işlemleri
  desteklemez. Örneğin, WASI mutlak dosya adlarıyla ortak bağlantılara
  izin vermez.


Mobile platforms
----------------

Android and iOS are, in most respects, POSIX operating systems. File
I/O, socket handling, and threading all behave as they would on any
POSIX operating system. However, there are several major differences:

* Mobile platforms can only use Python in "embedded" mode. There is no
  Python REPL, and no ability to use separate executables such as
  **python** or **pip**. To add Python code to your mobile app, you
  must use the Python embedding API. For more details, see Using
  Python on Android and Using Python on iOS.

* Subprocesses:

  * On Android, creating subprocesses is possible but officially
    unsupported. In particular, Android does not support any part of
    the System V IPC API, so "multiprocessing" is not available.

  * An iOS app cannot use any form of subprocessing, multiprocessing,
    or inter-process communication. If an iOS app attempts to create a
    subprocess, the process creating the subprocess will either lock
    up, or crash. An iOS app has no visibility of other applications
    that are running, nor any ability to communicate with other
    running applications, outside of the iOS-specific APIs that exist
    for this purpose.

* Mobile apps have limited access to modify system resources (such as
  the system clock). These resources will often be *readable*, but
  attempts to modify those resources will usually fail.

* Console input and output:

  * On Android, the native "stdout" and "stderr" are not connected to
    anything, so Python installs its own streams which redirect
    messages to the system log. These can be seen under the tags
    "python.stdout" and "python.stderr" respectively.

  * iOS apps have a limited concept of console output. "stdout" and
    "stderr" *exist*, and content written to "stdout" and "stderr"
    will be visible in logs when running in Xcode, but this content
    *won't* be recorded in the system log. If a user who has installed
    your app provides their app logs as a diagnostic aid, they will
    not include any detail written to "stdout" or "stderr".

  * Mobile apps have no usable "stdin" at all. While apps can display
    an on-screen keyboard, this is a software feature, not something
    that is attached to "stdin".

    As a result, Python modules that involve console manipulation
    (such as "curses" and "readline") are not available on mobile
    platforms.
