2. Лексический анализ
*********************

A Python program is read by a *parser*.  Input to the parser is a
stream of *tokens*, generated by the *lexical analyzer* (also known as
the *tokenizer*). This chapter describes how the lexical analyzer
breaks a file into tokens.

Python reads program text as Unicode code points; the encoding of a
source file can be given by an encoding declaration and defaults to
UTF-8, see **PEP 3120** for details.  If the source file cannot be
decoded, a "SyntaxError" is raised.


2.1. Структура строк
====================

Программа на Python разделена на несколько *логических строк*.


2.1.1. Логические строки
------------------------

The end of a logical line is represented by the token NEWLINE.
Statements cannot cross logical line boundaries except where NEWLINE
is allowed by the syntax (e.g., between statements in compound
statements). A logical line is constructed from one or more *physical
lines* by following the explicit or implicit *line joining* rules.


2.1.2. Физические строки
------------------------

A physical line is a sequence of characters terminated by an end-of-
line sequence.  In source files and strings, any of the standard
platform line termination sequences can be used - the Unix form using
ASCII LF (linefeed), the Windows form using the ASCII sequence CR LF
(return followed by linefeed), or the old Macintosh form using the
ASCII CR (return) character.  All of these forms can be used equally,
regardless of platform. The end of input also serves as an implicit
terminator for the final physical line.

When embedding Python, source code strings should be passed to Python
APIs using the standard C conventions for newline characters (the "\n"
character, representing ASCII LF, is the line terminator).


2.1.3. Комментарии
------------------

Комментарий начинается с символа решётки ("#"), который не является
частью строкового литерала, и заканчивается в конце физической строки.
Комментарий обозначает конец логической строки, если не применяются
правила неявного объединения строк. Комментарии игнорируются
синтаксисом.


2.1.4. Объявление кодировки
---------------------------

Если комментарий в первой или второй строке скрипта Python
соответствует регулярному выражению "coding[=:]\s*([-\w.]+)", этот
комментарий обрабатывается как объявление кодировки; первая группа
этого выражения задаёт кодировку файла с исходным кодом. Объявление
кодировки должно располагаться на отдельной строке. Если это вторая
строка, первая строка также должна быть строкой только с комментарием.
Рекомендуемые формы записи кодировки

   # -*- coding: <encoding-name> -*-

которые распознаются также GNU Emacs, и

   # vim:fileencoding=<encoding-name>

которые распознаются редактором VIM Брэма Муленаара.

If no encoding declaration is found, the default encoding is UTF-8.
If the implicit or explicit encoding of a file is UTF-8, an initial
UTF-8 byte-order mark (b'xefxbbxbf') is ignored rather than being a
syntax error.

Если кодировка объявлена, её имя должно распознаваться Python (см.
Standard Encodings). Кодировка используется для всего лексического
анализа, включая строковые литералы, комментарии и идентификаторы.


2.1.5. Явное объединение строк
------------------------------

Две или более физических строк могут быть объединены в логическую
строку с помощью символа обратного слэша ("\"), следующим образом:
если физическая строка оканчивается обратным слэшем, который не
является частью строкового литерала или комментария, она объединяется
с последующей строкой, формируя единую логическую строку, при этом
удаляются сам обратный слэш и следующий символ конца строки. Например:

   if 1900 < year < 2100 and 1 <= month <= 12 \
      and 1 <= day <= 31 and 0 <= hour < 24 \
      and 0 <= minute < 60 and 0 <= second < 60:   # Похоже на корректную дату
           return 1

Строка, заканчивающаяся обратным слэшем, не может содержать
комментарий. Обратный слэш не продолжает комментарий. Обратный слэш не
делит токен, кроме строковых литералов (т.е. токены, отличные от
строковых литералов, нельзя разделять на физические строки с помощью
обратного слэша). В остальных местах строки вне строковых литералов
использование обратного слэша запрещено.


2.1.6. Неявное объединение строк
--------------------------------

Выражения в круглых, квадратных или фигурных скобках можно разделить
на несколько физических строк без использования обратного слэша.
Например:

   month_names = ['Januari', 'Februari', 'Maart',      # Это
                  'April',   'Mei',      'Juni',       # голландские названия
                  'Juli',    'Augustus', 'September',  # месяцев
                  'Oktober', 'November', 'December']   # в году

Строки, продолжающиеся неявно, могут содержать комментарии. Отступ
строк продолжения не важен. Допускаются также пустые строки
продолжения. Между строками неявного продолжения нет токена NEWLINE.
Неявно продолжающиеся строки также могут встречаться в строках,
заключенных в тройные кавычки (см. ниже); в этом случае комментраии в
них запрещены.


2.1.7. Пустые строки
--------------------

A logical line that contains only spaces, tabs, formfeeds and possibly
a comment, is ignored (i.e., no NEWLINE token is generated).  During
interactive input of statements, handling of a blank line may differ
depending on the implementation of the read-eval-print loop.  In the
standard interactive interpreter, an entirely blank logical line (i.e.
one containing not even whitespace or a comment) terminates a multi-
line statement.


2.1.8. Отступы
--------------

Ведущие пробельные символы (пробелы и табуляции) в начале логической
строки определяют уровень её отступа, который, в свою очередь,
используется для определения группировки инструкций.

Табуляции заменяются (слева направо) на несколько пробелов — от одного
до восьми — так, чтобы общее количество символов от начала строки до
конца замены включительно было кратно восьми (это соответствует
правилу, используемому в Unix). Количество пробелов перед первым
непустым символом определяет отступ строки. Отступы нельзя разделять
на несколько физических строк с помощью обратного слэша; пробельные
символы до первого обратного слэша определяют отступ.

Отступы отклоняются как непоследовательные, если в исходном файле
табуляции и пробелы смешаны таким образом, что смысл кода зависит от
того, сколько пробелов занимает одна табуляция. В этом случае
возникает "TabError".

**Примечание о кроссплатформенной совместимости:** из-за особенностей
текстовых редакторов на платформах, отличных от UNIX, не рекомендуется
использовать сочетание пробелов и табуляции для отступов в одном
исходном файле. Также следует отметить, что разные платформы могут
явно ограничивать максимальный уровень отступов.

Символ перевода страницы может присутствовать в начале строки; он
игнорируется при вычислении уровня отступа. Символы перевода страницы,
встречающиеся внутри начальных пробелов, имеют неопределённый эффект
(например, они могут обнулить счётчик пробелов).

The indentation levels of consecutive lines are used to generate
INDENT and DEDENT tokens, using a stack, as follows.

Before the first line of the file is read, a single zero is pushed on
the stack; this will never be popped off again.  The numbers pushed on
the stack will always be strictly increasing from bottom to top.  At
the beginning of each logical line, the line's indentation level is
compared to the top of the stack. If it is equal, nothing happens. If
it is larger, it is pushed on the stack, and one INDENT token is
generated.  If it is smaller, it *must* be one of the numbers
occurring on the stack; all numbers on the stack that are larger are
popped off, and for each number popped off a DEDENT token is
generated.  At the end of the file, a DEDENT token is generated for
each number remaining on the stack that is larger than zero.

Вот пример корректного (хотя и запутанного) фрагмента кода Python с
отступами:

   def perm(l):
           # Вычисление списка всех перестановок l
       if len(l) <= 1:
                     return [l]
       r = []
       for i in range(len(l)):
                s = l[:i] + l[i+1:]
                p = perm(s)
                for x in p:
                 r.append(l[i:i+1] + x)
       return r

В следующем примере показаны различные ошибки отступов:

    def perm(l):                       # ошибка: первая строка с отступом
   for i in range(len(l)):             # ошибка: нет отступа
       s = l[:i] + l[i+1:]
           p = perm(l[:i] + l[i+1:])   # ошибка: неожиданный отступ
           for x in p:
                   r.append(l[i:i+1] + x)
               return r                # ошибка: несогласующееся уменьшение отступа

(На самом деле первые три ошибки обнаруживаются парсером; только
последняя ошибка определяется лексическим анализатором — отступ
"return r" не соответствует уровню, извлечённому из стека.)


2.1.9. Пробелы между токенами
-----------------------------

Except at the beginning of a logical line or in string literals, the
whitespace characters space, tab and formfeed can be used
interchangeably to separate tokens.  Whitespace is needed between two
tokens only if their concatenation could otherwise be interpreted as a
different token (e.g., ab is one token, but a b is two tokens).


2.2. Другие токены
==================

Besides NEWLINE, INDENT and DEDENT, the following categories of tokens
exist: *identifiers*, *keywords*, *literals*, *operators*, and
*delimiters*. Whitespace characters (other than line terminators,
discussed earlier) are not tokens, but serve to delimit tokens. Where
ambiguity exists, a token comprises the longest possible string that
forms a legal token, when read from left to right.


2.3. Identifiers and keywords
=============================

Identifiers (also referred to as *names*) are described by the
following lexical definitions.

The syntax of identifiers in Python is based on the Unicode standard
annex UAX-31, with elaboration and changes as defined below; see also
**PEP 3131** for further details.

Within the ASCII range (U+0001..U+007F), the valid characters for
identifiers include the uppercase and lowercase letters "A" through
"Z", the underscore "_" and, except for the first character, the
digits "0" through "9". Python 3.0 introduced additional characters
from outside the ASCII range (see **PEP 3131**).  For these
characters, the classification uses the version of the Unicode
Character Database as included in the "unicodedata" module.

Identifiers are unlimited in length.  Case is significant.

   identifier   ::= xid_start xid_continue*
   id_start     ::= <all characters in general categories Lu, Ll, Lt, Lm, Lo, Nl, the underscore, and characters with the Other_ID_Start property>
   id_continue  ::= <all characters in id_start, plus characters in the categories Mn, Mc, Nd, Pc and others with the Other_ID_Continue property>
   xid_start    ::= <all characters in id_start whose NFKC normalization is in "id_start xid_continue*">
   xid_continue ::= <all characters in id_continue whose NFKC normalization is in "id_continue*">

The Unicode category codes mentioned above stand for:

* *Lu* - uppercase letters

* *Ll* - lowercase letters

* *Lt* - titlecase letters

* *Lm* - modifier letters

* *Lo* - other letters

* *Nl* - letter numbers

* *Mn* - nonspacing marks

* *Mc* - spacing combining marks

* *Nd* - decimal numbers

* *Pc* - connector punctuations

* *Other_ID_Start* - explicit list of characters in PropList.txt to
  support backwards compatibility

* *Other_ID_Continue* - likewise

All identifiers are converted into the normal form NFKC while parsing;
comparison of identifiers is based on NFKC.

A non-normative HTML file listing all valid identifier characters for
Unicode 15.0.0 can be found at
https://www.unicode.org/Public/15.0.0/ucd/DerivedCoreProperties.txt


2.3.1. Ключевые слова
---------------------

The following identifiers are used as reserved words, or *keywords* of
the language, and cannot be used as ordinary identifiers.  They must
be spelled exactly as written here:

   False      await      else       import     pass
   None       break      except     in         raise
   True       class      finally    is         return
   and        continue   for        lambda     try
   as         def        from       nonlocal   while
   assert     del        global     not        with
   async      elif       if         or         yield


2.3.2. Мягкие ключевые слова
----------------------------

Добавлено в версии 3.10.

Some identifiers are only reserved under specific contexts. These are
known as *soft keywords*.  The identifiers "match", "case", "type" and
"_" can syntactically act as keywords in certain contexts, but this
distinction is done at the parser level, not when tokenizing.

В качестве мягких ключевых слов их можно использовать в грамматике при
сохранении совместимости с существующим кодом, где эти имена
встречаются в качестве идентификаторов.

"match", "case", and "_" are used in the "match" statement. "type" is
used in the "type" statement.

Изменено в версии 3.12: "type" теперь является мягким ключевым словом.


2.3.3. Зарезервированные классы идентификаторов
-----------------------------------------------

Некоторые классы идентификаторов (помимо ключевых слов) имеют особое
значение. Эти классы определяются шаблонами начальных и конечных
символов подчёркивания:

"_*"
   Не импортируются при использовании "from module import *".

"_"
   В шаблоне "case" внутри инструкции "match" символ "_" является
   мягким ключевым словом, обозначающим шаблон-подстановку.

   Отдельно стоит отметить, что в интерактивном интерпретаторе
   результат последнего вычисления доступен в переменной "_". (Она
   хранится в модуле "builtins" наряду со встроенными функциями,
   такими как "print".)

   В остальных случаях "_" — обычный идентификатор. Его часто
   используют для именования «специальных» элементов, однако сам по
   себе он не имеет особого значения для Python.

   Примечание:

     Имя "_" часто используется в сочетании с интернационализацией;
     обратитесь к документации модуля "gettext" для получения
     дополнительной информации об этом соглашении.Оно также широко
     применяется для обозначения неиспользуемых переменных.

"__*__"
   Имена, определяемые системой, неформально называемые
   «dunder»-именами. Эти имена определяются интерпретатором и его
   реализацией (включая стандартную библиотеку). Текущие системные
   имена обсуждаются в разделе Имена специальных методов и в других
   местах документации. Вероятно, в будущих версиях Python будет
   добавлено ещё больше таких имён. *Любое* использование имён вида
   "__*__" в любом контексте, не соответствующее явно
   задокументированному назначению, может привести к сбоям без
   предупреждения.

"__*"
   Имена, приватные для класса. Имена этой категории при использовании
   внутри определения класса автоматически преобразуются в искажённую
   форму, что помогает избежать конфликтов имён между «приватными»
   атрибутами базовых и производных классов. См. раздел Identifiers
   (Names).


2.4. Литералы
=============

Литералы — это явная запись постоянных значений некоторых встроенных
типов.


2.4.1. Строковые и байтовые литералы
------------------------------------

String literals are described by the following lexical definitions:

   stringliteral   ::= [stringprefix](shortstring | longstring)
   stringprefix    ::= "r" | "u" | "R" | "U" | "f" | "F"
                       | "fr" | "Fr" | "fR" | "FR" | "rf" | "rF" | "Rf" | "RF"
   shortstring     ::= "'" shortstringitem* "'" | '"' shortstringitem* '"'
   longstring      ::= "'''" longstringitem* "'''" | '"""' longstringitem* '"""'
   shortstringitem ::= shortstringchar | stringescapeseq
   longstringitem  ::= longstringchar | stringescapeseq
   shortstringchar ::= <any source character except "\" or newline or the quote>
   longstringchar  ::= <any source character except "\">
   stringescapeseq ::= "\" <any source character>

   bytesliteral   ::= bytesprefix(shortbytes | longbytes)
   bytesprefix    ::= "b" | "B" | "br" | "Br" | "bR" | "BR" | "rb" | "rB" | "Rb" | "RB"
   shortbytes     ::= "'" shortbytesitem* "'" | '"' shortbytesitem* '"'
   longbytes      ::= "'''" longbytesitem* "'''" | '"""' longbytesitem* '"""'
   shortbytesitem ::= shortbyteschar | bytesescapeseq
   longbytesitem  ::= longbyteschar | bytesescapeseq
   shortbyteschar ::= <any ASCII character except "\" or newline or the quote>
   longbyteschar  ::= <any ASCII character except "\">
   bytesescapeseq ::= "\" <any ASCII character>

One syntactic restriction not indicated by these productions is that
whitespace is not allowed between the "stringprefix" or "bytesprefix"
and the rest of the literal. The source character set is defined by
the encoding declaration; it is UTF-8 if no encoding declaration is
given in the source file; see section Объявление кодировки.

In plain English: Both types of literals can be enclosed in matching
single quotes ("'") or double quotes (""").  They can also be enclosed
in matching groups of three single or double quotes (these are
generally referred to as *triple-quoted strings*). The backslash ("\")
character is used to give special meaning to otherwise ordinary
characters like "n", which means 'newline' when escaped ("\n"). It can
also be used to escape characters that otherwise have a special
meaning, such as newline, backslash itself, or the quote character.
See escape sequences below for examples.

Bytes literals are always prefixed with "'b'" or "'B'"; they produce
an instance of the "bytes" type instead of the "str" type.  They may
only contain ASCII characters; bytes with a numeric value of 128 or
greater must be expressed with escapes.

Both string and bytes literals may optionally be prefixed with a
letter "'r'" or "'R'"; such constructs are called *raw string
literals* and *raw bytes literals* respectively and treat backslashes
as literal characters.  As a result, in raw string literals, "'\U'"
and "'\u'" escapes are not treated specially.

Добавлено в версии 3.3: Префикс "'rb'" для сырых байтовых литералов
был добавлен как синоним "'br'".Поддержка устаревшего литерала Unicode
("u'value'") была вновь введена для упрощения сопровождения кодовых
баз, совместимых с Python 2.x и 3.x. Дополнительные сведения см. в
**PEP 414**.

A string literal with "'f'" or "'F'" in its prefix is a *formatted
string literal*; see f-строки.  The "'f'" may be combined with "'r'",
but not with "'b'" or "'u'", therefore raw formatted strings are
possible, but formatted bytes literals are not.

In triple-quoted literals, unescaped newlines and quotes are allowed
(and are retained), except that three unescaped quotes in a row
terminate the literal.  (A "quote" is the character used to open the
literal, i.e. either "'" or """.)


2.4.1.1. Экранированные последовательности
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Unless an "'r'" or "'R'" prefix is present, escape sequences in string
and bytes literals are interpreted according to rules similar to those
used by Standard C.  The recognized escape sequences are:

+---------------------------+-----------------------------------+---------+
| Экранированная            | Значение                          | Notes   |
| последовательность        |                                   |         |
|===========================|===================================|=========|
| "\"<newline>              | Backslash and newline ignored     | (1)     |
+---------------------------+-----------------------------------+---------+
| "\\"                      | Backslash ("\")                   |         |
+---------------------------+-----------------------------------+---------+
| "\'"                      | Single quote ("'")                |         |
+---------------------------+-----------------------------------+---------+
| "\""                      | Double quote (""")                |         |
+---------------------------+-----------------------------------+---------+
| "\a"                      | Сигнал «звонка» ASCII (BEL)       |         |
+---------------------------+-----------------------------------+---------+
| "\b"                      | Возврат каретки назад ASCII (BS)  |         |
+---------------------------+-----------------------------------+---------+
| "\f"                      | Перевод страницы ASCII (FF)       |         |
+---------------------------+-----------------------------------+---------+
| "\n"                      | Перевод строки ASCII (LF)         |         |
+---------------------------+-----------------------------------+---------+
| "\r"                      | Возврат каретки ASCII (CR)        |         |
+---------------------------+-----------------------------------+---------+
| "\t"                      | Горизонтальная табуляция ASCII    |         |
|                           | (TAB)                             |         |
+---------------------------+-----------------------------------+---------+
| "\v"                      | Вертикальная табуляция ASCII (VT) |         |
+---------------------------+-----------------------------------+---------+
| "\*ooo*"                  | Character with octal value *ooo*  | (2,4)   |
+---------------------------+-----------------------------------+---------+
| "\x*hh*"                  | Character with hex value *hh*     | (3,4)   |
+---------------------------+-----------------------------------+---------+

Escape sequences only recognized in string literals are:

+---------------------------+-----------------------------------+---------+
| Экранированная            | Значение                          | Notes   |
| последовательность        |                                   |         |
|===========================|===================================|=========|
| "\N{*name*}"              | Character named *name* in the     | (5)     |
|                           | Unicode database                  |         |
+---------------------------+-----------------------------------+---------+
| "\u*xxxx*"                | Character with 16-bit hex value   | (6)     |
|                           | *xxxx*                            |         |
+---------------------------+-----------------------------------+---------+
| "\U*xxxxxxxx*"            | Character with 32-bit hex value   | (7)     |
|                           | *xxxxxxxx*                        |         |
+---------------------------+-----------------------------------+---------+

Notes:

1. В конце строки можно добавить обратный слэш, чтобы игнорировать
   перевод строки:

      >>> 'Эта строка не будет включать \
      ... обратные слэши или символы перевода строки.'
      'Эта строка не будет включать обратные слэши или символы перевода строки.'

   Того же результата можно добиться, используя строки в тройных
   кавычках или круглые скобки и конкатенацию строковых литералов.

2. As in Standard C, up to three octal digits are accepted.

   Изменено в версии 3.11: Octal escapes with value larger than
   "0o377" produce a "DeprecationWarning".

   Изменено в версии 3.12: Octal escapes with value larger than
   "0o377" produce a "SyntaxWarning". In a future Python version they
   will be eventually a "SyntaxError".

3. В отличие от стандарта языка C требуется ровно две
   шестнадцатеричные цифры.

4. In a bytes literal, hexadecimal and octal escapes denote the byte
   with the given value. In a string literal, these escapes denote a
   Unicode character with the given value.

5. Изменено в версии 3.3: Support for name aliases [1] has been added.

6. Exactly four hex digits are required.

7. Any Unicode character can be encoded this way.  Exactly eight hex
   digits are required.

Unlike Standard C, all unrecognized escape sequences are left in the
string unchanged, i.e., *the backslash is left in the result*.  (This
behavior is useful when debugging: if an escape sequence is mistyped,
the resulting output is more easily recognized as broken.)  It is also
important to note that the escape sequences only recognized in string
literals fall into the category of unrecognized escapes for bytes
literals.

Изменено в версии 3.6: Нераспознанные экранированные
последовательности вызывают "DeprecationWarning".

Изменено в версии 3.12: Unrecognized escape sequences produce a
"SyntaxWarning". In a future Python version they will be eventually a
"SyntaxError".

Даже в сыром литерале кавычки можно экранировать обратным слэшем, но
сам слэш остаётся в результате; например, "r"\""" — это корректный
литерал, состоящий из двух символов: обратного слэша и двойной
кавычки. Литерал "r"\"" не является допустимым (даже сырая строка не
может заканчиваться нечётным числом слэшей). Конкретно, *сырой литерал
не может заканчиваться одним обратным слэшем* (так как слэш
экранировал бы следующую кавычку). Также обратный слэш, за которым
идёт перевод строки, интерпретируется как два отдельных символа, а
*не* как продолжение строки.


2.4.2. String literal concatenation
-----------------------------------

Multiple adjacent string or bytes literals (delimited by whitespace),
possibly using different quoting conventions, are allowed, and their
meaning is the same as their concatenation.  Thus, ""hello" 'world'"
is equivalent to ""helloworld"".  This feature can be used to reduce
the number of backslashes needed, to split long strings conveniently
across long lines, or even to add comments to parts of strings, for
example:

   re.compile("[A-Za-z_]"       # letter or underscore
              "[A-Za-z0-9_]*"   # letter, digit or underscore
             )

Note that this feature is defined at the syntactical level, but
implemented at compile time.  The '+' operator must be used to
concatenate string expressions at run time.  Also note that literal
concatenation can use different quoting styles for each component
(even mixing raw strings and triple quoted strings), and formatted
string literals may be concatenated with plain string literals.


2.4.3. f-строки
---------------

Добавлено в версии 3.6.

A *formatted string literal* or *f-string* is a string literal that is
prefixed with "'f'" or "'F'".  These strings may contain replacement
fields, which are expressions delimited by curly braces "{}". While
other string literals always have a constant value, formatted strings
are really expressions evaluated at run time.

Escape sequences are decoded like in ordinary string literals (except
when a literal is also marked as a raw string).  After decoding, the
grammar for the contents of the string is:

   f_string          ::= (literal_char | "{{" | "}}" | replacement_field)*
   replacement_field ::= "{" f_expression ["="] ["!" conversion] [":" format_spec] "}"
   f_expression      ::= (conditional_expression | "*" or_expr)
                         ("," conditional_expression | "," "*" or_expr)* [","]
                         | yield_expression
   conversion        ::= "s" | "r" | "a"
   format_spec       ::= (literal_char | replacement_field)*
   literal_char      ::= <any code point except "{", "}" or NULL>

The parts of the string outside curly braces are treated literally,
except that any doubled curly braces "'{{'" or "'}}'" are replaced
with the corresponding single curly brace.  A single opening curly
bracket "'{'" marks a replacement field, which starts with a Python
expression. To display both the expression text and its value after
evaluation, (useful in debugging), an equal sign "'='" may be added
after the expression. A conversion field, introduced by an exclamation
point "'!'" may follow.  A format specifier may also be appended,
introduced by a colon "':'". A replacement field ends with a closing
curly bracket "'}'".

Expressions in formatted string literals are treated like regular
Python expressions surrounded by parentheses, with a few exceptions.
An empty expression is not allowed, and both "lambda"  and assignment
expressions ":=" must be surrounded by explicit parentheses. Each
expression is evaluated in the context where the formatted string
literal appears, in order from left to right.  Replacement expressions
can contain newlines in both single-quoted and triple-quoted f-strings
and they can contain comments.  Everything that comes after a "#"
inside a replacement field is a comment (even closing braces and
quotes). In that case, replacement fields must be closed in a
different line.

   >>> f"abc{a # This is a comment }"
   ... + 3}"
   'abc5'

Изменено в версии 3.7: Prior to Python 3.7, an "await" expression and
comprehensions containing an "async for" clause were illegal in the
expressions in formatted string literals due to a problem with the
implementation.

Изменено в версии 3.12: Prior to Python 3.12, comments were not
allowed inside f-string replacement fields.

When the equal sign "'='" is provided, the output will have the
expression text, the "'='" and the evaluated value. Spaces after the
opening brace "'{'", within the expression and after the "'='" are all
retained in the output. By default, the "'='" causes the "repr()" of
the expression to be provided, unless there is a format specified.
When a format is specified it defaults to the "str()" of the
expression unless a conversion "'!r'" is declared.

Добавлено в версии 3.8: The equal sign "'='".

If a conversion is specified, the result of evaluating the expression
is converted before formatting.  Conversion "'!s'" calls "str()" on
the result, "'!r'" calls "repr()", and "'!a'" calls "ascii()".

The result is then formatted using the "format()" protocol.  The
format specifier is passed to the "__format__()" method of the
expression or conversion result.  An empty string is passed when the
format specifier is omitted.  The formatted result is then included in
the final value of the whole string.

Top-level format specifiers may include nested replacement fields.
These nested fields may include their own conversion fields and format
specifiers, but may not include more deeply nested replacement fields.
The format specifier mini-language is the same as that used by the
"str.format()" method.

Formatted string literals may be concatenated, but replacement fields
cannot be split across literals.

Some examples of formatted string literals:

   >>> name = "Fred"
   >>> f"He said his name is {name!r}."
   "He said his name is 'Fred'."
   >>> f"He said his name is {repr(name)}."  # repr() is equivalent to !r
   "He said his name is 'Fred'."
   >>> width = 10
   >>> precision = 4
   >>> value = decimal.Decimal("12.34567")
   >>> f"result: {value:{width}.{precision}}"  # nested fields
   'result:      12.35'
   >>> today = datetime(year=2017, month=1, day=27)
   >>> f"{today:%B %d, %Y}"  # using date format specifier
   'January 27, 2017'
   >>> f"{today=:%B %d, %Y}" # using date format specifier and debugging
   'today=January 27, 2017'
   >>> number = 1024
   >>> f"{number:#0x}"  # using integer format specifier
   '0x400'
   >>> foo = "bar"
   >>> f"{ foo = }" # preserves whitespace
   " foo = 'bar'"
   >>> line = "The mill's closed"
   >>> f"{line = }"
   'line = "The mill\'s closed"'
   >>> f"{line = :20}"
   "line = The mill's closed   "
   >>> f"{line = !r:20}"
   'line = "The mill\'s closed" '

Допускается повторное использование того же типа кавычек, которые
используются для внешней f-строки, внутри поля подстановки:

   >>> a = dict(x=2)
   >>> f"abc {a["x"]} def"
   'abc 2 def'

Изменено в версии 3.12: Prior to Python 3.12, reuse of the same
quoting type of the outer f-string inside a replacement field was not
possible.

Обратные слэши также разрешены в полях подстановки и обрабатываются
так же, как и в любом другом контексте:

   >>> a = ["a", "b", "c"]
   >>> print(f"Список a содержит:\n{"\n".join(a)}")
   Список a содержит:
   a
   b
   c

Изменено в версии 3.12: Prior to Python 3.12, backslashes were not
permitted inside an f-string replacement field.

Formatted string literals cannot be used as docstrings, even if they
do not include expressions.

   >>> def foo():
   ...     f"Not a docstring"
   ...
   >>> foo.__doc__ is None
   True

See also **PEP 498** for the proposal that added formatted string
literals, and "str.format()", which uses a related format string
mechanism.


2.4.4. Числовые литералы
------------------------

There are three types of numeric literals: integers, floating-point
numbers, and imaginary numbers.  There are no complex literals
(complex numbers can be formed by adding a real number and an
imaginary number).

Note that numeric literals do not include a sign; a phrase like "-1"
is actually an expression composed of the unary operator '"-"' and the
literal "1".


2.4.5. Целочисленные литералы
-----------------------------

Integer literals are described by the following lexical definitions:

   integer      ::= decinteger | bininteger | octinteger | hexinteger
   decinteger   ::= nonzerodigit (["_"] digit)* | "0"+ (["_"] "0")*
   bininteger   ::= "0" ("b" | "B") (["_"] bindigit)+
   octinteger   ::= "0" ("o" | "O") (["_"] octdigit)+
   hexinteger   ::= "0" ("x" | "X") (["_"] hexdigit)+
   nonzerodigit ::= "1"..."9"
   digit        ::= "0"..."9"
   bindigit     ::= "0" | "1"
   octdigit     ::= "0"..."7"
   hexdigit     ::= digit | "a"..."f" | "A"..."F"

There is no limit for the length of integer literals apart from what
can be stored in available memory.

Underscores are ignored for determining the numeric value of the
literal.  They can be used to group digits for enhanced readability.
One underscore can occur between digits, and after base specifiers
like "0x".

Note that leading zeros in a non-zero decimal number are not allowed.
This is for disambiguation with C-style octal literals, which Python
used before version 3.0.

Some examples of integer literals:

   7     2147483647                        0o177    0b100110111
   3     79228162514264337593543950336     0o377    0xdeadbeef
         100_000_000_000                   0b_1110_0101

Изменено в версии 3.6: Подчёркивания теперь разрешены для визуального
группирования цифр в литералах.


2.4.6. Литералы с плавающей точкой
----------------------------------

Floating-point literals are described by the following lexical
definitions:

   floatnumber   ::= pointfloat | exponentfloat
   pointfloat    ::= [digitpart] fraction | digitpart "."
   exponentfloat ::= (digitpart | pointfloat) exponent
   digitpart     ::= digit (["_"] digit)*
   fraction      ::= "." digitpart
   exponent      ::= ("e" | "E") ["+" | "-"] digitpart

Note that the integer and exponent parts are always interpreted using
radix 10. For example, "077e010" is legal, and denotes the same number
as "77e10". The allowed range of floating-point literals is
implementation-dependent.  As in integer literals, underscores are
supported for digit grouping.

Some examples of floating-point literals:

   3.14    10.    .001    1e100    3.14e-10    0e0    3.14_15_93

Изменено в версии 3.6: Подчёркивания теперь разрешены для визуального
группирования цифр в литералах.


2.4.7. Мнимые литералы
----------------------

Imaginary literals are described by the following lexical definitions:

   imagnumber ::= (floatnumber | digitpart) ("j" | "J")

An imaginary literal yields a complex number with a real part of 0.0.
Complex numbers are represented as a pair of floating-point numbers
and have the same restrictions on their range.  To create a complex
number with a nonzero real part, add a floating-point number to it,
e.g., "(3+4j)".  Some examples of imaginary literals:

   3.14j   10.j    10j     .001j   1e100j   3.14e-10j   3.14_15_93j


2.5. Operators
==============

The following tokens are operators:

   +       -       *       **      /       //      %      @
   <<      >>      &       |       ^       ~       :=
   <       >       <=      >=      ==      !=


2.6. Delimiters
===============

The following tokens serve as delimiters in the grammar:

   (       )       [       ]       {       }
   ,       :       !       .       ;       @       =
   ->      +=      -=      *=      /=      //=     %=
   @=      &=      |=      ^=      >>=     <<=     **=

The period can also occur in floating-point and imaginary literals.  A
sequence of three periods has a special meaning as an ellipsis
literal. The second half of the list, the augmented assignment
operators, serve lexically as delimiters, but also perform an
operation.

The following printing ASCII characters have special meaning as part
of other tokens or are otherwise significant to the lexical analyzer:

   '       "       #       \

The following printing ASCII characters are not used in Python.  Their
occurrence outside string literals and comments is an unconditional
error:

   $       ?       `

-[ Footnotes ]-

[1] https://www.unicode.org/Public/15.0.0/ucd/NameAliases.txt
