Parsing arguments and building values
*************************************

These functions are useful when creating your own extension functions
and methods.  Additional information and examples are available in
Extending and Embedding the Python Interpreter.

The first three of these functions described, "PyArg_ParseTuple()",
"PyArg_ParseTupleAndKeywords()", and "PyArg_Parse()", all use *format
strings* which are used to tell the function about the expected
arguments.  The format strings use the same syntax for each of these
functions.


Parsing arguments
=================

A format string consists of zero or more "format units."  A format
unit describes one Python object; it is usually a single character or
a parenthesized sequence of format units.  With a few exceptions, a
format unit that is not a parenthesized sequence normally corresponds
to a single address argument to these functions.  In the following
description, the quoted form is the format unit; the entry in (round)
parentheses is the Python object type that matches the format unit;
and the entry in [square] brackets is the type of the C variable(s)
whose address should be passed.


Strings and buffers
-------------------

Notă:

  On Python 3.12 and older, the macro "PY_SSIZE_T_CLEAN" must be
  defined before including "Python.h" to use all "#" variants of
  formats ("s#", "y#", etc.) explained below. This is not necessary on
  Python 3.13 and later.

These formats allow accessing an object as a contiguous chunk of
memory. You don't have to provide raw storage for the returned unicode
or bytes area.

Unless otherwise stated, buffers are not NUL-terminated.

There are three ways strings and buffers can be converted to C:

* Formats such as "y*" and "s*" fill a "Py_buffer" structure. This
  locks the underlying buffer so that the caller can subsequently use
  the buffer even inside a "Py_BEGIN_ALLOW_THREADS" block without the
  risk of mutable data being resized or destroyed. As a result, **you
  have to call** "PyBuffer_Release()" after you have finished
  processing the data (or in any early abort case).

* The "es", "es#", "et" and "et#" formats allocate the result buffer.
  **You have to call** "PyMem_Free()" after you have finished
  processing the data (or in any early abort case).

* Other formats take a "str" or a read-only *bytes-like object*, such
  as "bytes", and provide a "const char *" pointer to its buffer. In
  this case the buffer is "borrowed": it is managed by the
  corresponding Python object, and shares the lifetime of this object.
  You won't have to release any memory yourself.

  To ensure that the underlying buffer may be safely borrowed, the
  object's "PyBufferProcs.bf_releasebuffer" field must be "NULL". This
  disallows common mutable objects such as "bytearray", but also some
  read-only objects such as "memoryview" of "bytes".

  Besides this "bf_releasebuffer" requirement, there is no check to
  verify whether the input object is immutable (e.g. whether it would
  honor a request for a writable buffer, or whether another thread can
  mutate the data).

"s" ("str") [const char *]
   Convert a Unicode object to a C pointer to a character string. A
   pointer to an existing string is stored in the character pointer
   variable whose address you pass.  The C string is NUL-terminated.
   The Python string must not contain embedded null code points; if it
   does, a "ValueError" exception is raised. Unicode objects are
   converted to C strings using "'utf-8'" encoding. If this conversion
   fails, a "UnicodeError" is raised.

   Notă:

     This format does not accept *bytes-like objects*.  If you want to
     accept filesystem paths and convert them to C character strings,
     it is preferable to use the "O&" format with
     "PyUnicode_FSConverter()" as *converter*.

   Schimbat în versiunea 3.5: Previously, "TypeError" was raised when
   embedded null code points were encountered in the Python string.

"s*" ("str" or *bytes-like object*) [Py_buffer]
   This format accepts Unicode objects as well as bytes-like objects.
   It fills a "Py_buffer" structure provided by the caller. In this
   case the resulting C string may contain embedded NUL bytes. Unicode
   objects are converted to C strings using "'utf-8'" encoding.

"s#" ("str", read-only *bytes-like object*) [const char *,
"Py_ssize_t"]
   Like "s*", except that it provides a borrowed buffer. The result is
   stored into two C variables, the first one a pointer to a C string,
   the second one its length. The string may contain embedded null
   bytes. Unicode objects are converted to C strings using "'utf-8'"
   encoding.

"z" ("str" or "None") [const char *]
   Like "s", but the Python object may also be "None", in which case
   the C pointer is set to "NULL".

"z*" ("str", *bytes-like object* or "None") [Py_buffer]
   Like "s*", but the Python object may also be "None", in which case
   the "buf" member of the "Py_buffer" structure is set to "NULL".

"z#" ("str", read-only *bytes-like object* or "None") [const char *,
"Py_ssize_t"]
   Like "s#", but the Python object may also be "None", in which case
   the C pointer is set to "NULL".

"y" (read-only *bytes-like object*) [const char *]
   This format converts a bytes-like object to a C pointer to a
   borrowed character string; it does not accept Unicode objects.  The
   bytes buffer must not contain embedded null bytes; if it does, a
   "ValueError" exception is raised.

   Schimbat în versiunea 3.5: Previously, "TypeError" was raised when
   embedded null bytes were encountered in the bytes buffer.

"y*" (*bytes-like object*) [Py_buffer]
   This variant on "s*" doesn't accept Unicode objects, only bytes-
   like objects.  **This is the recommended way to accept binary
   data.**

"y#" (read-only *bytes-like object*) [const char *, "Py_ssize_t"]
   This variant on "s#" doesn't accept Unicode objects, only bytes-
   like objects.

"S" ("bytes") [PyBytesObject *]
   Requires that the Python object is a "bytes" object, without
   attempting any conversion.  Raises "TypeError" if the object is not
   a bytes object.  The C variable may also be declared as PyObject*.

"Y" ("bytearray") [PyByteArrayObject *]
   Requires that the Python object is a "bytearray" object, without
   attempting any conversion.  Raises "TypeError" if the object is not
   a "bytearray" object. The C variable may also be declared as
   PyObject*.

"U" ("str") [PyObject *]
   Requires that the Python object is a Unicode object, without
   attempting any conversion.  Raises "TypeError" if the object is not
   a Unicode object.  The C variable may also be declared as
   PyObject*.

"w*" (read-write *bytes-like object*) [Py_buffer]
   This format accepts any object which implements the read-write
   buffer interface. It fills a "Py_buffer" structure provided by the
   caller. The buffer may contain embedded null bytes. The caller have
   to call "PyBuffer_Release()" when it is done with the buffer.

"es" ("str") [const char *encoding, char **buffer]
   This variant on "s" is used for encoding Unicode into a character
   buffer. It only works for encoded data without embedded NUL bytes.

   This format requires two arguments.  The first is only used as
   input, and must be a const char* which points to the name of an
   encoding as a NUL-terminated string, or "NULL", in which case
   "'utf-8'" encoding is used. An exception is raised if the named
   encoding is not known to Python.  The second argument must be a
   char**; the value of the pointer it references will be set to a
   buffer with the contents of the argument text. The text will be
   encoded in the encoding specified by the first argument.

   "PyArg_ParseTuple()" will allocate a buffer of the needed size,
   copy the encoded data into this buffer and adjust **buffer* to
   reference the newly allocated storage.  The caller is responsible
   for calling "PyMem_Free()" to free the allocated buffer after use.

"et" ("str", "bytes" or "bytearray") [const char *encoding, char
**buffer]
   Same as "es" except that byte string objects are passed through
   without recoding them.  Instead, the implementation assumes that
   the byte string object uses the encoding passed in as parameter.

"es#" ("str") [const char *encoding, char **buffer, "Py_ssize_t"
*buffer_length]
   This variant on "s#" is used for encoding Unicode into a character
   buffer. Unlike the "es" format, this variant allows input data
   which contains NUL characters.

   It requires three arguments.  The first is only used as input, and
   must be a const char* which points to the name of an encoding as a
   NUL-terminated string, or "NULL", in which case "'utf-8'" encoding
   is used. An exception is raised if the named encoding is not known
   to Python.  The second argument must be a char**; the value of the
   pointer it references will be set to a buffer with the contents of
   the argument text. The text will be encoded in the encoding
   specified by the first argument. The third argument must be a
   pointer to an integer; the referenced integer will be set to the
   number of bytes in the output buffer.

   There are two modes of operation:

   If **buffer* points a "NULL" pointer, the function will allocate a
   buffer of the needed size, copy the encoded data into this buffer
   and set **buffer* to reference the newly allocated storage.  The
   caller is responsible for calling "PyMem_Free()" to free the
   allocated buffer after usage.

   If **buffer* points to a non-"NULL" pointer (an already allocated
   buffer), "PyArg_ParseTuple()" will use this location as the buffer
   and interpret the initial value of **buffer_length* as the buffer
   size.  It will then copy the encoded data into the buffer and NUL-
   terminate it.  If the buffer is not large enough, a "ValueError"
   will be set.

   In both cases, **buffer_length* is set to the length of the encoded
   data without the trailing NUL byte.

"et#" ("str", "bytes" or "bytearray") [const char *encoding, char
**buffer, "Py_ssize_t" *buffer_length]
   Same as "es#" except that byte string objects are passed through
   without recoding them. Instead, the implementation assumes that the
   byte string object uses the encoding passed in as parameter.

Schimbat în versiunea 3.12: "u", "u#", "Z", and "Z#" are removed
because they used a legacy "Py_UNICODE*" representation.


Numbers
-------

These formats allow representing Python numbers or single characters
as C numbers. Formats that require "int", "float" or "complex" can
also use the corresponding special methods "__index__()",
"__float__()" or "__complex__()" to convert the Python object to the
required type.

For signed integer formats, "OverflowError" is raised if the value is
out of range for the C type. For unsigned integer formats, no range
checking is done --- the most significant bits are silently truncated
when the receiving field is too small to receive the value.

"b" ("int") [unsigned char]
   Convert a nonnegative Python integer to an unsigned tiny integer,
   stored in a C unsigned char.

"B" ("int") [unsigned char]
   Convert a Python integer to a tiny integer without overflow
   checking, stored in a C unsigned char.

"h" ("int") [short int]
   Convert a Python integer to a C short int.

"H" ("int") [unsigned short int]
   Convert a Python integer to a C unsigned short int, without
   overflow checking.

"i" ("int") [int]
   Convert a Python integer to a plain C int.

"I" ("int") [unsigned int]
   Convert a Python integer to a C unsigned int, without overflow
   checking.

"l" ("int") [long int]
   Convert a Python integer to a C long int.

"k" ("int") [unsigned long]
   Convert a Python integer to a C unsigned long without overflow
   checking.

   Schimbat în versiunea 3.14: Use "__index__()" if available.

"L" ("int") [long long]
   Convert a Python integer to a C long long.

"K" ("int") [unsigned long long]
   Convert a Python integer to a C unsigned long long without overflow
   checking.

   Schimbat în versiunea 3.14: Use "__index__()" if available.

"n" ("int") ["Py_ssize_t"]
   Convert a Python integer to a C "Py_ssize_t".

"c" ("bytes" or "bytearray" of length 1) [char]
   Convert a Python byte, represented as a "bytes" or "bytearray"
   object of length 1, to a C char.

   Schimbat în versiunea 3.3: Allow "bytearray" objects.

"C" ("str" of length 1) [int]
   Convert a Python character, represented as a "str" object of length
   1, to a C int.

"f" ("float") [float]
   Convert a Python floating-point number to a C float.

"d" ("float") [double]
   Convert a Python floating-point number to a C double.

"D" ("complex") [Py_complex]
   Convert a Python complex number to a C "Py_complex" structure.


Other objects
-------------

"O" (object) [PyObject *]
   Store a Python object (without any conversion) in a C object
   pointer.  The C program thus receives the actual object that was
   passed.  A new *strong reference* to the object is not created
   (i.e. its reference count is not increased). The pointer stored is
   not "NULL".

"O!" (object) [*typeobject*, PyObject *]
   Store a Python object in a C object pointer.  This is similar to
   "O", but takes two C arguments: the first is the address of a
   Python type object, the second is the address of the C variable (of
   type PyObject*) into which the object pointer is stored.  If the
   Python object does not have the required type, "TypeError" is
   raised.

"O&" (object) [*converter*, *address*]
   Convert a Python object to a C variable through a *converter*
   function.  This takes two arguments: the first is a function, the
   second is the address of a C variable (of arbitrary type),
   converted to void*.  The *converter* function in turn is called as
   follows:

      status = converter(object, address);

   where *object* is the Python object to be converted and *address*
   is the void* argument that was passed to the "PyArg_Parse*"
   function. The returned *status* should be "1" for a successful
   conversion and "0" if the conversion has failed.  When the
   conversion fails, the *converter* function should raise an
   exception and leave the content of *address* unmodified.

   If the *converter* returns "Py_CLEANUP_SUPPORTED", it may get
   called a second time if the argument parsing eventually fails,
   giving the converter a chance to release any memory that it had
   already allocated. In this second call, the *object* parameter will
   be "NULL"; *address* will have the same value as in the original
   call.

   Examples of converters: "PyUnicode_FSConverter()" and
   "PyUnicode_FSDecoder()".

   Schimbat în versiunea 3.1: "Py_CLEANUP_SUPPORTED" was added.

"p" ("bool") [int]
   Tests the value passed in for truth (a boolean **p**redicate) and
   converts the result to its equivalent C true/false integer value.
   Sets the int to "1" if the expression was true and "0" if it was
   false. This accepts any valid Python value.  See Truth Value
   Testing for more information about how Python tests values for
   truth.

   Added in version 3.3.

"(items)" (sequence) [*matching-items*]
   The object must be a Python sequence (except "str", "bytes" or
   "bytearray") whose length is the number of format units in *items*.
   The C arguments must correspond to the individual format units in
   *items*.  Format units for sequences may be nested.

   If *items* contains format units which store a borrowed buffer
   ("s", "s#", "z", "z#", "y", or "y#") or a *borrowed reference*
   ("S", "Y", "U", "O", or "O!"), the object must be a Python tuple.
   The *converter* for the "O&" format unit in *items* must not store
   a borrowed buffer or a borrowed reference.

   Schimbat în versiunea 3.14: "str" and "bytearray" objects no longer
   accepted as a sequence.

   Învechit începând cu versiunea 3.14: Non-tuple sequences are
   deprecated if *items* contains format units which store a borrowed
   buffer or a borrowed reference.

A few other characters have a meaning in a format string.  These may
not occur inside nested parentheses.  They are:

"|"
   Indicates that the remaining arguments in the Python argument list
   are optional. The C variables corresponding to optional arguments
   should be initialized to their default value --- when an optional
   argument is not specified, "PyArg_ParseTuple()" does not touch the
   contents of the corresponding C variable(s).

"$"
   "PyArg_ParseTupleAndKeywords()" only: Indicates that the remaining
   arguments in the Python argument list are keyword-only.  Currently,
   all keyword-only arguments must also be optional arguments, so "|"
   must always be specified before "$" in the format string.

   Added in version 3.3.

":"
   The list of format units ends here; the string after the colon is
   used as the function name in error messages (the "associated value"
   of the exception that "PyArg_ParseTuple()" raises).

";"
   The list of format units ends here; the string after the semicolon
   is used as the error message *instead* of the default error
   message.  ":" and ";" mutually exclude each other.

Note that any Python object references which are provided to the
caller are *borrowed* references; do not release them (i.e. do not
decrement their reference count)!

Additional arguments passed to these functions must be addresses of
variables whose type is determined by the format string; these are
used to store values from the input tuple.  There are a few cases, as
described in the list of format units above, where these parameters
are used as input values; they should match what is specified for the
corresponding format unit in that case.

For the conversion to succeed, the *arg* object must match the format
and the format must be exhausted.  On success, the "PyArg_Parse*"
functions return true, otherwise they return false and raise an
appropriate exception. When the "PyArg_Parse*" functions fail due to
conversion failure in one of the format units, the variables at the
addresses corresponding to that and the following format units are
left untouched.


API Functions
-------------

int PyArg_ParseTuple(PyObject *args, const char *format, ...)
    * Part of the Stable ABI.*

   Parse the parameters of a function that takes only positional
   parameters into local variables.  Returns true on success; on
   failure, it returns false and raises the appropriate exception.

int PyArg_VaParse(PyObject *args, const char *format, va_list vargs)
    * Part of the Stable ABI.*

   Identical to "PyArg_ParseTuple()", except that it accepts a va_list
   rather than a variable number of arguments.

int PyArg_ParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *const *keywords, ...)
    * Part of the Stable ABI.*

   Parse the parameters of a function that takes both positional and
   keyword parameters into local variables. The *keywords* argument is
   a "NULL"-terminated array of keyword parameter names specified as
   null-terminated ASCII or UTF-8 encoded C strings. Empty names
   denote positional-only parameters. Returns true on success; on
   failure, it returns false and raises the appropriate exception.

   Notă:

     The *keywords* parameter declaration is char *const* in C and
     const char *const* in C++. This can be overridden with the
     "PY_CXX_CONST" macro.

   Schimbat în versiunea 3.6: Added support for positional-only
   parameters.

   Schimbat în versiunea 3.13: The *keywords* parameter has now type
   char *const* in C and const char *const* in C++, instead of char**.
   Added support for non-ASCII keyword parameter names.

int PyArg_VaParseTupleAndKeywords(PyObject *args, PyObject *kw, const char *format, char *const *keywords, va_list vargs)
    * Part of the Stable ABI.*

   Identical to "PyArg_ParseTupleAndKeywords()", except that it
   accepts a va_list rather than a variable number of arguments.

int PyArg_ValidateKeywordArguments(PyObject*)
    * Part of the Stable ABI.*

   Ensure that the keys in the keywords argument dictionary are
   strings.  This is only needed if "PyArg_ParseTupleAndKeywords()" is
   not used, since the latter already does this check.

   Added in version 3.2.

int PyArg_Parse(PyObject *args, const char *format, ...)
    * Part of the Stable ABI.*

   Parse the parameter of a function that takes a single positional
   parameter into a local variable.  Returns true on success; on
   failure, it returns false and raises the appropriate exception.

   Example:

      // Function using METH_O calling convention
      static PyObject*
      my_function(PyObject *module, PyObject *arg)
      {
          int value;
          if (!PyArg_Parse(arg, "i:my_function", &value)) {
              return NULL;
          }
          // ... use value ...
      }

int PyArg_UnpackTuple(PyObject *args, const char *name, Py_ssize_t min, Py_ssize_t max, ...)
    * Part of the Stable ABI.*

   A simpler form of parameter retrieval which does not use a format
   string to specify the types of the arguments.  Functions which use
   this method to retrieve their parameters should be declared as
   "METH_VARARGS" in function or method tables.  The tuple containing
   the actual parameters should be passed as *args*; it must actually
   be a tuple.  The length of the tuple must be at least *min* and no
   more than *max*; *min* and *max* may be equal.  Additional
   arguments must be passed to the function, each of which should be a
   pointer to a PyObject* variable; these will be filled in with the
   values from *args*; they will contain *borrowed references*. The
   variables which correspond to optional parameters not given by
   *args* will not be filled in; these should be initialized by the
   caller. This function returns true on success and false if *args*
   is not a tuple or contains the wrong number of elements; an
   exception will be set if there was a failure.

   This is an example of the use of this function, taken from the
   sources for the "_weakref" helper module for weak references:

      static PyObject *
      weakref_ref(PyObject *self, PyObject *args)
      {
          PyObject *object;
          PyObject *callback = NULL;
          PyObject *result = NULL;

          if (PyArg_UnpackTuple(args, "ref", 1, 2, &object, &callback)) {
              result = PyWeakref_NewRef(object, callback);
          }
          return result;
      }

   The call to "PyArg_UnpackTuple()" in this example is entirely
   equivalent to this call to "PyArg_ParseTuple()":

      PyArg_ParseTuple(args, "O|O:ref", &object, &callback)

PY_CXX_CONST

   The value to be inserted, if any, before char *const* in the
   *keywords* parameter declaration of "PyArg_ParseTupleAndKeywords()"
   and "PyArg_VaParseTupleAndKeywords()". Default empty for C and
   "const" for C++ (const char *const*). To override, define it to the
   desired value before including "Python.h".

   Added in version 3.13.


Building values
===============

PyObject *Py_BuildValue(const char *format, ...)
    *Return value: New reference.** Part of the Stable ABI.*

   Create a new value based on a format string similar to those
   accepted by the "PyArg_Parse*" family of functions and a sequence
   of values.  Returns the value or "NULL" in the case of an error; an
   exception will be raised if "NULL" is returned.

   "Py_BuildValue()" does not always build a tuple.  It builds a tuple
   only if its format string contains two or more format units.  If
   the format string is empty, it returns "None"; if it contains
   exactly one format unit, it returns whatever object is described by
   that format unit.  To force it to return a tuple of size 0 or one,
   parenthesize the format string.

   When memory buffers are passed as parameters to supply data to
   build objects, as for the "s" and "s#" formats, the required data
   is copied.  Buffers provided by the caller are never referenced by
   the objects created by "Py_BuildValue()".  In other words, if your
   code invokes "malloc()" and passes the allocated memory to
   "Py_BuildValue()", your code is responsible for calling "free()"
   for that memory once "Py_BuildValue()" returns.

   In the following description, the quoted form is the format unit;
   the entry in (round) parentheses is the Python object type that the
   format unit will return; and the entry in [square] brackets is the
   type of the C value(s) to be passed.

   The characters space, tab, colon and comma are ignored in format
   strings (but not within format units such as "s#").  This can be
   used to make long format strings a tad more readable.

   "s" ("str" or "None") [const char *]
      Convert a null-terminated C string to a Python "str" object
      using "'utf-8'" encoding. If the C string pointer is "NULL",
      "None" is used.

   "s#" ("str" or "None") [const char *, "Py_ssize_t"]
      Convert a C string and its length to a Python "str" object using
      "'utf-8'" encoding. If the C string pointer is "NULL", the
      length is ignored and "None" is returned.

   "y" ("bytes") [const char *]
      This converts a C string to a Python "bytes" object.  If the C
      string pointer is "NULL", "None" is returned.

   "y#" ("bytes") [const char *, "Py_ssize_t"]
      This converts a C string and its lengths to a Python object.  If
      the C string pointer is "NULL", "None" is returned.

   "z" ("str" or "None") [const char *]
      Same as "s".

   "z#" ("str" or "None") [const char *, "Py_ssize_t"]
      Same as "s#".

   "u" ("str") [const wchar_t *]
      Convert a null-terminated "wchar_t" buffer of Unicode (UTF-16 or
      UCS-4) data to a Python Unicode object.  If the Unicode buffer
      pointer is "NULL", "None" is returned.

   "u#" ("str") [const wchar_t *, "Py_ssize_t"]
      Convert a Unicode (UTF-16 or UCS-4) data buffer and its length
      to a Python Unicode object.   If the Unicode buffer pointer is
      "NULL", the length is ignored and "None" is returned.

   "U" ("str" or "None") [const char *]
      Same as "s".

   "U#" ("str" or "None") [const char *, "Py_ssize_t"]
      Same as "s#".

   "i" ("int") [int]
      Convert a plain C int to a Python integer object.

   "b" ("int") [char]
      Convert a plain C char to a Python integer object.

   "h" ("int") [short int]
      Convert a plain C short int to a Python integer object.

   "l" ("int") [long int]
      Convert a C long int to a Python integer object.

   "B" ("int") [unsigned char]
      Convert a C unsigned char to a Python integer object.

   "H" ("int") [unsigned short int]
      Convert a C unsigned short int to a Python integer object.

   "I" ("int") [unsigned int]
      Convert a C unsigned int to a Python integer object.

   "k" ("int") [unsigned long]
      Convert a C unsigned long to a Python integer object.

   "L" ("int") [long long]
      Convert a C long long to a Python integer object.

   "K" ("int") [unsigned long long]
      Convert a C unsigned long long to a Python integer object.

   "n" ("int") ["Py_ssize_t"]
      Convert a C "Py_ssize_t" to a Python integer.

   "p" ("bool") [int]
      Convert a C int to a Python "bool" object.

      Be aware that this format requires an "int" argument. Unlike
      most other contexts in C, variadic arguments are not coerced to
      a suitable type automatically. You can convert another type (for
      example, a pointer or a float) to a suitable "int" value using
      "(x) ? 1 : 0" or "!!x".

      Added in version 3.14.

   "c" ("bytes" of length 1) [char]
      Convert a C int representing a byte to a Python "bytes" object
      of length 1.

   "C" ("str" of length 1) [int]
      Convert a C int representing a character to Python "str" object
      of length 1.

   "d" ("float") [double]
      Convert a C double to a Python floating-point number.

   "f" ("float") [float]
      Convert a C float to a Python floating-point number.

   "D" ("complex") [Py_complex *]
      Convert a C "Py_complex" structure to a Python complex number.

   "O" (object) [PyObject *]
      Pass a Python object untouched but create a new *strong
      reference* to it (i.e. its reference count is incremented by
      one). If the object passed in is a "NULL" pointer, it is assumed
      that this was caused because the call producing the argument
      found an error and set an exception. Therefore,
      "Py_BuildValue()" will return "NULL" but won't raise an
      exception.  If no exception has been raised yet, "SystemError"
      is set.

   "S" (object) [PyObject *]
      Same as "O".

   "N" (object) [PyObject *]
      Same as "O", except it doesn't create a new *strong reference*.
      Useful when the object is created by a call to an object
      constructor in the argument list.

   "O&" (object) [*converter*, *anything*]
      Convert *anything* to a Python object through a *converter*
      function.  The function is called with *anything* (which should
      be compatible with void*) as its argument and should return a
      "new" Python object, or "NULL" if an error occurred.

   "(items)" ("tuple") [*matching-items*]
      Convert a sequence of C values to a Python tuple with the same
      number of items.

   "[items]" ("list") [*matching-items*]
      Convert a sequence of C values to a Python list with the same
      number of items.

   "{items}" ("dict") [*matching-items*]
      Convert a sequence of C values to a Python dictionary.  Each
      pair of consecutive C values adds one item to the dictionary,
      serving as key and value, respectively.

   If there is an error in the format string, the "SystemError"
   exception is set and "NULL" returned.

PyObject *Py_VaBuildValue(const char *format, va_list vargs)
    *Return value: New reference.** Part of the Stable ABI.*

   Identical to "Py_BuildValue()", except that it accepts a va_list
   rather than a variable number of arguments.
