`warnings` — Warning control¶

Código-fonte: Lib/warnings.py

As mensagens de aviso são normalmente emitidas em situações em que é útil alertar o usuário sobre alguma condição em um programa, onde essa condição (normalmente) não garante o levantamento de uma exceção e o encerramento do programa. Por exemplo, pode-se querer emitir um aviso quando um programa usa um módulo obsoleto.

Os programadores Python emitem avisos chamando a função warn() definida neste módulo. (Os programadores C usam PyErr_WarnEx(); veja Manipulando Exceções para detalhes).

Mensagens de aviso são normalmente escritas no sys.stderr, mas sua disposição pode ser alterada de forma flexível, desde ignorar todos os avisos até transformá-los em exceções. A disposição dos avisos pode variar de acordo com categoria de aviso, o texto da mensagem de aviso e o local de origem onde ela é emitida. As repetições de um aviso específico para o mesmo local de origem são normalmente suprimidas.

Existem duas etapas no controle de avisos: primeiro, cada vez que um aviso é emitido, é feita uma determinação se uma mensagem deve ser emitida ou não; a seguir, se uma mensagem deve ser emitida, ela é formatada e impressa usando um gancho configurável pelo usuário.

A determinação de emitir ou não uma mensagem de aviso é controlada pelo filtro de aviso, que é uma sequência de regras e ações correspondentes. As regras podem ser adicionadas ao filtro chamando filterwarnings() e redefinidas para seu estado padrão chamando resetwarnings().

A exibição de mensagens de aviso é feita chamando showwarning(), que pode ser substituída; a implementação padrão desta função formata a mensagem chamando formatwarning(), que também está disponível para uso por implementações personalizadas.

Ver também

logging.captureWarnings() permite que você manipule todos os avisos com a infraestrutura de registro padrão.

Categorias de avisos¶

Existem várias exceções embutidas que representam categorias de aviso. Essa categorização é útil para filtrar grupos de avisos.

Embora sejam tecnicamente exceções embutidas, elas são documentadas aqui, porque conceitualmente pertencem ao mecanismo de avisos.

O código do usuário pode definir categorias de aviso adicionais criando uma subclasse de uma das categorias de aviso padrão. Uma categoria de aviso deve ser sempre uma subclasse da classe Warning.

As seguintes classes de categorias de avisos estão definidas atualmente:

Classe	Descrição
`Warning`	Esta é a classe base de todas as classes de categoria de aviso. É uma subclasse de `Exception`.
`UserWarning`	A categoria padrão para `warn()`.
`DeprecationWarning`	Categoria base para avisos sobre recursos descontinuados quando esses avisos são destinados a outros desenvolvedores Python (ignorado por padrão, a menos que acionado por código em `__main__`).
`SyntaxWarning`	Categoria base para avisos sobre recursos sintáticos duvidosos.
`RuntimeWarning`	Categoria base para avisos sobre recursos duvidosos de tempo de execução.
`FutureWarning`	Categoria base para avisos sobre recursos descontinuados quando esses avisos se destinam a usuários finais de aplicações escritas em Python.
`PendingDeprecationWarning`	Categoria base para avisos sobre recursos que serão descontinuados no futuro (ignorados por padrão).
`ImportWarning`	Categoria base para avisos acionados durante o processo de importação de um módulo (ignorado por padrão).
`UnicodeWarning`	Categoria base para avisos relacionados a Unicode.
`BytesWarning`	Categoria base para avisos relacionados a `bytes` e `bytearray`.
`ResourceWarning`	Base category for warnings related to resource usage (ignored by default).

Alterado na versão 3.7: Anteriormente, DeprecationWarning e FutureWarning eram diferenciadas com base em se um recurso estava sendo removido completamente ou mudando seu comportamento. Elas agora são diferenciadas com base em seu público-alvo e na maneira como são tratadas pelos filtros de avisos padrão.

O filtro de avisos¶

O filtro de avisos controla se os avisos são ignorados, exibidos ou transformados em erros (levantando uma exceção).

Conceitualmente, o filtro de avisos mantém uma lista ordenada de especificações de filtro; qualquer aviso específico é comparado com cada especificação de filtro na lista, por sua vez, até que uma correspondência seja encontrada; o filtro determina a disposição da correspondência. Cada entrada é uma tupla no formato (action, message, category, module, lineno), sendo:

action é uma das seguintes strings:

Valor	Disposição
`"default"`	exibe a primeira ocorrência de avisos correspondentes para cada local (módulo + número da linha) onde o aviso é emitido
`"error"`	transforma avisos correspondentes em exceções
`"ignore"`	nunca exibe avisos correspondentes
`"always"`	sempre exibe avisos correspondentes
`"all"`	alias to “always”
`"module"`	exibe a primeira ocorrência de avisos correspondentes para cada módulo onde o aviso é emitido (independentemente do número da linha)
`"once"`	exibe apenas a primeira ocorrência de avisos correspondentes, independentemente da localização

message is a string containing a regular expression that the start of the warning message must match, case-insensitively. In -W and PYTHONWARNINGS, message is a literal string that the start of the warning message must contain (case-insensitively), ignoring any whitespace at the start or end of message.
category é uma classe (uma subclasse de Warning) da qual a categoria de aviso deve ser uma subclasse para corresponder.
module is a string containing a regular expression that the start of the fully qualified module name must match, case-sensitively. In -W and PYTHONWARNINGS, module is a literal string that the fully qualified module name must be equal to (case-sensitively), ignoring any whitespace at the start or end of module.
lineno é um número inteiro que deve corresponder ao número da linha onde ocorreu o aviso, ou 0 para corresponder a todos os números de linha.

Como a classe Warning é derivada da classe embutida Exception, para transformar um aviso em um erro, simplesmente levantamos category(message).

Se um aviso for relatado e não corresponder a nenhum filtro registrado, a ação “padrão” será aplicada (daí seu nome).

Repeated Warning Suppression Criteria¶

The filters that suppress repeated warnings apply the following criteria to determine if a warning is considered a repeat:

"default": A warning is considered a repeat only if the (message, category, module, lineno) are all the same.
"module": A warning is considered a repeat if the (message, category, module) are the same, ignoring the line number.
"once": A warning is considered a repeat if the (message, category) are the same, ignoring the module and line number.

Describing Warning Filters¶

The warnings filter is initialized by -W options passed to the Python interpreter command line and the PYTHONWARNINGS environment variable. The interpreter saves the arguments for all supplied entries without interpretation in sys.warnoptions; the warnings module parses these when it is first imported (invalid options are ignored, after printing a message to sys.stderr).

Individual warnings filters are specified as a sequence of fields separated by colons:

action:message:category:module:line

The meaning of each of these fields is as described in O filtro de avisos. When listing multiple filters on a single line (as for PYTHONWARNINGS), the individual filters are separated by commas and the filters listed later take precedence over those listed before them (as they’re applied left-to-right, and the most recently applied filters take precedence over earlier ones).

Commonly used warning filters apply to either all warnings, warnings in a particular category, or warnings raised by particular modules or packages. Some examples:

default                      # Show all warnings (even those ignored by default)
ignore                       # Ignore all warnings
error                        # Convert all warnings to errors
error::ResourceWarning       # Treat ResourceWarning messages as errors
default::DeprecationWarning  # Show DeprecationWarning messages
ignore,default:::mymodule    # Only report warnings triggered by "mymodule"
error:::mymodule             # Convert warnings to errors in "mymodule"

Filtro de avisos padrão¶

By default, Python installs several warning filters, which can be overridden by the -W command-line option, the PYTHONWARNINGS environment variable and calls to filterwarnings().

In regular release builds, the default warning filter has the following entries (in order of precedence):

default::DeprecationWarning:__main__
ignore::DeprecationWarning
ignore::PendingDeprecationWarning
ignore::ImportWarning
ignore::ResourceWarning

In a debug build, the list of default warning filters is empty.

Alterado na versão 3.2: DeprecationWarning is now ignored by default in addition to PendingDeprecationWarning.

Alterado na versão 3.7: DeprecationWarning is once again shown by default when triggered directly by code in __main__.

Alterado na versão 3.7: BytesWarning no longer appears in the default filter list and is instead configured via sys.warnoptions when -b is specified twice.

Overriding the default filter¶

Developers of applications written in Python may wish to hide all Python level warnings from their users by default, and only display them when running tests or otherwise working on the application. The sys.warnoptions attribute used to pass filter configurations to the interpreter can be used as a marker to indicate whether or not warnings should be disabled:

import sys

if not sys.warnoptions:
    import warnings
    warnings.simplefilter("ignore")

Developers of test runners for Python code are advised to instead ensure that all warnings are displayed by default for the code under test, using code like:

import sys

if not sys.warnoptions:
    import os, warnings
    warnings.simplefilter("default") # Change the filter in this process
    os.environ["PYTHONWARNINGS"] = "default" # Also affect subprocesses

Finally, developers of interactive shells that run user code in a namespace other than __main__ are advised to ensure that DeprecationWarning messages are made visible by default, using code like the following (where user_ns is the module used to execute code entered interactively):

import warnings
warnings.filterwarnings("default", category=DeprecationWarning,
                                   module=user_ns.get("__name__"))

Temporarily Suppressing Warnings¶

If you are using code that you know will raise a warning, such as a deprecated function, but do not want to see the warning (even when warnings have been explicitly configured via the command line), then it is possible to suppress the warning using the catch_warnings context manager:

import warnings

def fxn():
    warnings.warn("deprecated", DeprecationWarning)

with warnings.catch_warnings():
    warnings.simplefilter("ignore")
    fxn()

While within the context manager all warnings will simply be ignored. This allows you to use known-deprecated code without having to see the warning while not suppressing the warning for other code that might not be aware of its use of deprecated code. Note: this can only be guaranteed in a single-threaded application. If two or more threads use the catch_warnings context manager at the same time, the behavior is undefined.

Testing Warnings¶

To test warnings raised by code, use the catch_warnings context manager. With it you can temporarily mutate the warnings filter to facilitate your testing. For instance, do the following to capture all raised warnings to check:

import warnings

def fxn():
    warnings.warn("deprecated", DeprecationWarning)

with warnings.catch_warnings(record=True) as w:
    # Cause all warnings to always be triggered.
    warnings.simplefilter("always")
    # Trigger a warning.
    fxn()
    # Verify some things
    assert len(w) == 1
    assert issubclass(w[-1].category, DeprecationWarning)
    assert "deprecated" in str(w[-1].message)

One can also cause all warnings to be exceptions by using error instead of always. One thing to be aware of is that if a warning has already been raised because of a once/default rule, then no matter what filters are set the warning will not be seen again unless the warnings registry related to the warning has been cleared.

Once the context manager exits, the warnings filter is restored to its state when the context was entered. This prevents tests from changing the warnings filter in unexpected ways between tests and leading to indeterminate test results. The showwarning() function in the module is also restored to its original value. Note: this can only be guaranteed in a single-threaded application. If two or more threads use the catch_warnings context manager at the same time, the behavior is undefined.

When testing multiple operations that raise the same kind of warning, it is important to test them in a manner that confirms each operation is raising a new warning (e.g. set warnings to be raised as exceptions and check the operations raise exceptions, check that the length of the warning list continues to increase after each operation, or else delete the previous entries from the warnings list before each new operation).

Updating Code For New Versions of Dependencies¶

Warning categories that are primarily of interest to Python developers (rather than end users of applications written in Python) are ignored by default.

Notably, this “ignored by default” list includes DeprecationWarning (for every module except __main__), which means developers should make sure to test their code with typically ignored warnings made visible in order to receive timely notifications of future breaking API changes (whether in the standard library or third party packages).

In the ideal case, the code will have a suitable test suite, and the test runner will take care of implicitly enabling all warnings when running tests (the test runner provided by the unittest module does this).

In less ideal cases, applications can be checked for use of deprecated interfaces by passing -Wd to the Python interpreter (this is shorthand for -W default) or setting PYTHONWARNINGS=default in the environment. This enables default handling for all warnings, including those that are ignored by default. To change what action is taken for encountered warnings you can change what argument is passed to -W (e.g. -W error). See the -W flag for more details on what is possible.

Available Functions¶

warnings.warn(message, category=None, stacklevel=1, source=None, *, skip_file_prefixes=())¶

Issue a warning, or maybe ignore it or raise an exception. The category argument, if given, must be a warning category class; it defaults to UserWarning. Alternatively, message can be a Warning instance, in which case category will be ignored and message.__class__ will be used. In this case, the message text will be str(message). This function raises an exception if the particular warning issued is changed into an error by the warnings filter. The stacklevel argument can be used by wrapper functions written in Python, like this:

def deprecated_api(message):
    warnings.warn(message, DeprecationWarning, stacklevel=2)

This makes the warning refer to deprecated_api’s caller, rather than to the source of deprecated_api itself (since the latter would defeat the purpose of the warning message).

The skip_file_prefixes keyword argument can be used to indicate which stack frames are ignored when counting stack levels. This can be useful when you want the warning to always appear at call sites outside of a package when a constant stacklevel does not fit all call paths or is otherwise challenging to maintain. If supplied, it must be a tuple of strings. When prefixes are supplied, stacklevel is implicitly overridden to be max(2, stacklevel). To cause a warning to be attributed to the caller from outside of the current package you might write:

# example/lower.py
_warn_skips = (os.path.dirname(__file__),)

def one_way(r_luxury_yacht=None, t_wobbler_mangrove=None):
    if r_luxury_yacht:
        warnings.warn("Please migrate to t_wobbler_mangrove=.",
                      skip_file_prefixes=_warn_skips)

# example/higher.py
from . import lower

def another_way(**kw):
    lower.one_way(**kw)

This makes the warning refer to both the example.lower.one_way() and package.higher.another_way() call sites only from calling code living outside of example package.

source, if supplied, is the destroyed object which emitted a ResourceWarning.

Alterado na versão 3.6: Added source parameter.

Alterado na versão 3.12: Added skip_file_prefixes.

warnings.warn_explicit(message, category, filename, lineno, module=None, registry=None, module_globals=None, source=None)¶

This is a low-level interface to the functionality of warn(), passing in explicitly the message, category, filename and line number, and optionally the module name and the registry (which should be the __warningregistry__ dictionary of the module). The module name defaults to the filename with .py stripped; if no registry is passed, the warning is never suppressed. message must be a string and category a subclass of Warning or message may be a Warning instance, in which case category will be ignored.

module_globals, if supplied, should be the global namespace in use by the code for which the warning is issued. (This argument is used to support displaying source for modules found in zipfiles or other non-filesystem import sources).

source, if supplied, is the destroyed object which emitted a ResourceWarning.

Alterado na versão 3.6: Add the source parameter.

warnings.showwarning(message, category, filename, lineno, file=None, line=None)¶: Write a warning to a file. The default implementation calls formatwarning(message, category, filename, lineno, line) and writes the resulting string to file, which defaults to sys.stderr. You may replace this function with any callable by assigning to warnings.showwarning. line is a line of source code to be included in the warning message; if line is not supplied, showwarning() will try to read the line specified by filename and lineno.

warnings.formatwarning(message, category, filename, lineno, line=None)¶: Format a warning the standard way. This returns a string which may contain embedded newlines and ends in a newline. line is a line of source code to be included in the warning message; if line is not supplied, formatwarning() will try to read the line specified by filename and lineno.

warnings.filterwarnings(action, message='', category=Warning, module='', lineno=0, append=False)¶: Insert an entry into the list of warnings filter specifications. The entry is inserted at the front by default; if append is true, it is inserted at the end. This checks the types of the arguments, compiles the message and module regular expressions, and inserts them as a tuple in the list of warnings filters. Entries closer to the front of the list override entries later in the list, if both match a particular warning. Omitted arguments default to a value that matches everything.

warnings.simplefilter(action, category=Warning, lineno=0, append=False)¶: Insert a simple entry into the list of warnings filter specifications. The meaning of the function parameters is as for filterwarnings(), but regular expressions are not needed as the filter inserted always matches any message in any module as long as the category and line number match.

warnings.resetwarnings()¶: Reset the warnings filter. This discards the effect of all previous calls to filterwarnings(), including that of the -W command line options and calls to simplefilter().

@warnings.deprecated(msg, *, category=DeprecationWarning, stacklevel=1)¶

Decorator to indicate that a class, function or overload is deprecated.

When this decorator is applied to an object, deprecation warnings may be emitted at runtime when the object is used. static type checkers will also generate a diagnostic on usage of the deprecated object.

Uso:

from warnings import deprecated
from typing import overload

@deprecated("Use B instead")
class A:
    pass

@deprecated("Use g instead")
def f():
    pass

@overload
@deprecated("int support is deprecated")
def g(x: int) -> int: ...
@overload
def g(x: str) -> int: ...

The warning specified by category will be emitted at runtime on use of deprecated objects. For functions, that happens on calls; for classes, on instantiation and on creation of subclasses. If the category is None, no warning is emitted at runtime. The stacklevel determines where the warning is emitted. If it is 1 (the default), the warning is emitted at the direct caller of the deprecated object; if it is higher, it is emitted further up the stack. Static type checker behavior is not affected by the category and stacklevel arguments.

The deprecation message passed to the decorator is saved in the __deprecated__ attribute on the decorated object. If applied to an overload, the decorator must be after the @overload decorator for the attribute to exist on the overload as returned by typing.get_overloads().

Adicionado na versão 3.13: See PEP 702.

Available Context Managers¶

class warnings.catch_warnings(*, record=False, module=None, action=None, category=Warning, lineno=0, append=False)¶

A context manager that copies and, upon exit, restores the warnings filter and the showwarning() function. If the record argument is False (the default) the context manager returns None on entry. If record is True, a list is returned that is progressively populated with objects as seen by a custom showwarning() function (which also suppresses output to sys.stdout). Each object in the list has attributes with the same names as the arguments to showwarning().

The module argument takes a module that will be used instead of the module returned when you import warnings whose filter will be protected. This argument exists primarily for testing the warnings module itself.

If the action argument is not None, the remaining arguments are passed to simplefilter() as if it were called immediately on entering the context.

See O filtro de avisos for the meaning of the category and lineno parameters.

Nota

The catch_warnings manager works by replacing and then later restoring the module’s showwarning() function and internal list of filter specifications. This means the context manager is modifying global state and therefore is not thread-safe.

Alterado na versão 3.11: Added the action, category, lineno, and append parameters.

`warnings` — Warning control¶

Categorias de avisos¶

O filtro de avisos¶

Repeated Warning Suppression Criteria¶

Describing Warning Filters¶

Filtro de avisos padrão¶

Overriding the default filter¶

Temporarily Suppressing Warnings¶

Testing Warnings¶

Updating Code For New Versions of Dependencies¶

Available Functions¶

Available Context Managers¶

Tabela de Conteúdo

Tópico anterior

Próximo tópico

Esta página

warnings — Warning control¶

Categorias de avisos¶

O filtro de avisos¶

Repeated Warning Suppression Criteria¶

Describing Warning Filters¶

Filtro de avisos padrão¶

Overriding the default filter¶

Temporarily Suppressing Warnings¶

Testing Warnings¶

Updating Code For New Versions of Dependencies¶

Available Functions¶

Available Context Managers¶

`warnings` — Warning control¶