Unicode
*******

Versão:
   1.12

Este documento fala sobre o suporte do Python para a especificação
Unicode de representação de dados textuais e explica diversos
problemas que as pessoas costumam encontrar quando tentam trabalhar
com Unicode.


Introdução ao Unicode
=====================


Definições
----------

Os programas de hoje precisam lidar com uma grande variedade de
caracteres. Aplicações são frequentemente internacionalizadas para
mostrar mensagens e gerar saídas em uma variedade de idiomas
selecionáveis por usuários; o mesmo programa precisar apresentar
mensagens de erro em inglês, francês, japonês, hebraico ou russo.
Conteúdo da web pode ser escrito em qualquer um desses idiomas e ainda
incluir uma variedade de emojis. O tipo string do Python usa o padrão
Unicode para representação de caracteres, o que permite aos programas
em Python funcionar com todos estes diferentes caracteres.

Unicode (https://www.unicode.org/) é a especificação que visa listar
cada caractere utilizado pelos idiomas humanos e dar a cada caractere
um código único. As especificações Unicode são continuamente revisadas
e atualizadas para adicionar novos idiomas e símbolos.

A **character** is the smallest possible component of a text.  'A',
'B', 'C', etc., are all different characters.  So are 'È' and 'Í'.
Characters vary depending on the language or context you're talking
about.  For example, there's a character for "Roman Numeral One", 'Ⅰ',
that's separate from the uppercase letter 'I'.  They'll usually look
the same, but these are two different characters that have different
meanings.

The Unicode standard describes how characters are represented by
**code points**.  A code point value is an integer in the range 0 to
0x10FFFF (about 1.1 million values, the actual number assigned is less
than that). In the standard and in this document, a code point is
written using the notation "U+265E" to mean the character with value
"0x265e" (9,822 in decimal).

O padrão Unicode contém várias tabelas listando caracteres e seus
pontos de código:

   0061    'a'; LATIN SMALL LETTER A
   0062    'b'; LATIN SMALL LETTER B
   0063    'c'; LATIN SMALL LETTER C
   ...
   007B    '{'; LEFT CURLY BRACKET
   ...
   2167    'Ⅷ'; ROMAN NUMERAL EIGHT
   2168    'Ⅸ'; ROMAN NUMERAL NINE
   ...
   265E    '♞'; BLACK CHESS KNIGHT
   265F    '♟'; BLACK CHESS PAWN
   ...
   1F600   '😀'; GRINNING FACE
   1F609   '😉'; WINKING FACE
   ...

Strictly, these definitions imply that it's meaningless to say 'this
is character "U+265E"'.  "U+265E" is a code point, which represents
some particular character; in this case, it represents the character
'BLACK CHESS KNIGHT', '♞'.  In informal contexts, this distinction
between code points and characters will sometimes be forgotten.

Um caractere é representado na tela ou no papel como um conjunto de
elementos gráficos que é chamado de **glifo**. O glifo para o A
maiúsculo, por exemplo, são dois traços diagonais e um traço
horizontal, embora os detalhes exatos dependem da fonte utilizada. Na
maior parte do código Python não é preciso se preocupar com glifos;
descobrir qual o glifo correto a ser mostrado é normalmente parte do
trabalho da ferramenta GUI ou do responsável pela renderização de
fontes no terminal.


Codificações
------------

To summarize the previous section: a Unicode string is a sequence of
code points, which are numbers from 0 through "0x10FFFF" (1,114,111
decimal).  This sequence of code points needs to be represented in
memory as a set of **code units**, and **code units** are then mapped
to 8-bit bytes.  The rules for translating a Unicode string into a
sequence of bytes are called a **character encoding**, or just an
**encoding**.

The first encoding you might think of is using 32-bit integers as the
code unit, and then using the CPU's representation of 32-bit integers.
In this representation, the string "Python" might look like this:

      P           y           t           h           o           n
   0x50 00 00 00 79 00 00 00 74 00 00 00 68 00 00 00 6f 00 00 00 6e 00 00 00
      0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Esta representação é direta, mas usá-la gera uma série de problemas.

1. Ela não é portátil; diferentes processadores ordenam os bytes de
   forma diferente.

2. Ela gera desperdício de espaço. Na maior parte dos textos, a
   maioria dos pontos de código são menores que 127 ou menores que
   255, então muito do espaço é ocupado por bytes "0x00" . A string
   acima necessita 24 bytes comparado com os 6 bytes necessários em
   uma representação ASCII. O aumento de uso da memória RAM
   normalmente não importa tanto (computadores desktop possuem
   gigabytes de RAM e strings normalmente não são tão grandes), mas
   expandir o uso de disco ou de banda por um fator de 4 é
   inaceitável.

3. Ela não é compatível com as funções de C existentes, como
   "strlen()", então uma série de novas funções de string serão
   necessárias.

Therefore this encoding isn't used very much, and people instead
choose other encodings that are more efficient and convenient, such as
UTF-8.

UTF-8 is one of the most commonly used encodings, and Python often
defaults to using it.  UTF stands for "Unicode Transformation Format",
and the '8' means that 8-bit values are used in the encoding.  (There
are also UTF-16 and UTF-32 encodings, but they are less frequently
used than UTF-8.)  UTF-8 uses the following rules:

1. If the code point is < 128, it's represented by the corresponding
   byte value.

2. If the code point is >= 128, it's turned into a sequence of two,
   three, or four bytes, where each byte of the sequence is between
   128 and 255.

UTF-8 tem muitas propriedades convenientes:

1. Ela pode lidar com qualquer ponto de código Unicode.

2. A Unicode string is turned into a sequence of bytes that contains
   embedded zero bytes only where they represent the null character
   (U+0000). This means that UTF-8 strings can be processed by C
   functions such as "strcpy()" and sent through protocols that can't
   handle zero bytes for anything other than end-of-string markers.

3. Uma string de texto ASCII é também um texto UTF-8 válido.

4. UTF-8 is fairly compact; the majority of commonly used characters
   can be represented with one or two bytes.

5. If bytes are corrupted or lost, it's possible to determine the
   start of the next UTF-8-encoded code point and resynchronize.  It's
   also unlikely that random 8-bit data will look like valid UTF-8.

6. UTF-8 is a byte oriented encoding. The encoding specifies that each
   character is represented by a specific sequence of one or more
   bytes. This avoids the byte-ordering issues that can occur with
   integer and word oriented encodings, like UTF-16 and UTF-32, where
   the sequence of bytes varies depending on the hardware on which the
   string was encoded.


Referências
-----------

The Unicode Consortium site has character charts, a glossary, and PDF
versions of the Unicode specification.  Be prepared for some difficult
reading.  A chronology of the origin and development of Unicode is
also available on the site.

On the Computerphile Youtube channel, Tom Scott briefly discusses the
history of Unicode and UTF-8 (9 minutes 36 seconds).

To help understand the standard, Jukka Korpela has written an
introductory guide to reading the Unicode character tables.

Another good introductory article was written by Joel Spolsky. If this
introduction didn't make things clear to you, you should try reading
this alternate article before continuing.

Wikipedia entries are often helpful; see the entries for "character
encoding" and UTF-8, for example.


Suporte a Unicode no Python
===========================

Now that you've learned the rudiments of Unicode, we can look at
Python's Unicode features.


O Tipo String
-------------

Since Python 3.0, the language's "str" type contains Unicode
characters, meaning any string created using ""unicode rocks!"",
"'unicode rocks!'", or the triple-quoted string syntax is stored as
Unicode.

The default encoding for Python source code is UTF-8, so you can
simply include a Unicode character in a string literal:

   try:
       with open('/tmp/input.txt', 'r') as f:
           ...
   except OSError:
       # 'File not found' error message.
       print("Fichier non trouvé")

Side note: Python 3 also supports using Unicode characters in
identifiers:

   répertoire = "/tmp/records.log"
   with open(répertoire, "w") as f:
       f.write("test\n")

If you can't enter a particular character in your editor or want to
keep the source code ASCII-only for some reason, you can also use
escape sequences in string literals. (Depending on your system, you
may see the actual capital-delta glyph instead of a u escape.)

   >>> "\N{GREEK CAPITAL LETTER DELTA}"  # Using the character name
   '\u0394'
   >>> "\u0394"                          # Using a 16-bit hex value
   '\u0394'
   >>> "\U00000394"                      # Using a 32-bit hex value
   '\u0394'

In addition, one can create a string using the "decode()" method of
"bytes".  This method takes an *encoding* argument, such as "UTF-8",
and optionally an *errors* argument.

The *errors* argument specifies the response when the input string
can't be converted according to the encoding's rules.  Legal values
for this argument are "'strict'" (raise a "UnicodeDecodeError"
exception), "'replace'" (use "U+FFFD", "REPLACEMENT CHARACTER"),
"'ignore'" (just leave the character out of the Unicode result), or
"'backslashreplace'" (inserts a "\xNN" escape sequence). The following
examples show the differences:

   >>> b'\x80abc'.decode("utf-8", "strict")
   Traceback (most recent call last):
       ...
   UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position 0:
     invalid start byte
   >>> b'\x80abc'.decode("utf-8", "replace")
   '\ufffdabc'
   >>> b'\x80abc'.decode("utf-8", "backslashreplace")
   '\\x80abc'
   >>> b'\x80abc'.decode("utf-8", "ignore")
   'abc'

Encodings are specified as strings containing the encoding's name.
Python comes with roughly 100 different encodings; see the Python
Library Reference at Standard Encodings for a list.  Some encodings
have multiple names; for example, "'latin-1'", "'iso_8859_1'" and
"'8859"' are all synonyms for the same encoding.

One-character Unicode strings can also be created with the "chr()"
built-in function, which takes integers and returns a Unicode string
of length 1 that contains the corresponding code point.  The reverse
operation is the built-in "ord()" function that takes a one-character
Unicode string and returns the code point value:

   >>> chr(57344)
   '\ue000'
   >>> ord('\ue000')
   57344


Convertendo para Bytes
----------------------

The opposite method of "bytes.decode()" is "str.encode()", which
returns a "bytes" representation of the Unicode string, encoded in the
requested *encoding*.

The *errors* parameter is the same as the parameter of the "decode()"
method but supports a few more possible handlers. As well as
"'strict'", "'ignore'", and "'replace'" (which in this case inserts a
question mark instead of the unencodable character), there is also
"'xmlcharrefreplace'" (inserts an XML character reference),
"backslashreplace" (inserts a "\uNNNN" escape sequence) and
"namereplace" (inserts a "\N{...}" escape sequence).

The following example shows the different results:

   >>> u = chr(40960) + 'abcd' + chr(1972)
   >>> u.encode('utf-8')
   b'\xea\x80\x80abcd\xde\xb4'
   >>> u.encode('ascii')
   Traceback (most recent call last):
       ...
   UnicodeEncodeError: 'ascii' codec can't encode character '\ua000' in
     position 0: ordinal not in range(128)
   >>> u.encode('ascii', 'ignore')
   b'abcd'
   >>> u.encode('ascii', 'replace')
   b'?abcd?'
   >>> u.encode('ascii', 'xmlcharrefreplace')
   b'&#40960;abcd&#1972;'
   >>> u.encode('ascii', 'backslashreplace')
   b'\\ua000abcd\\u07b4'
   >>> u.encode('ascii', 'namereplace')
   b'\\N{YI SYLLABLE IT}abcd\\u07b4'

The low-level routines for registering and accessing the available
encodings are found in the "codecs" module.  Implementing new
encodings also requires understanding the "codecs" module. However,
the encoding and decoding functions returned by this module are
usually more low-level than is comfortable, and writing new encodings
is a specialized task, so the module won't be covered in this HOWTO.


Unicode Literals in Python Source Code
--------------------------------------

In Python source code, specific Unicode code points can be written
using the "\u" escape sequence, which is followed by four hex digits
giving the code point.  The "\U" escape sequence is similar, but
expects eight hex digits, not four:

   >>> s = "a\xac\u1234\u20ac\U00008000"
   ... #     ^^^^ two-digit hex escape
   ... #         ^^^^^^ four-digit Unicode escape
   ... #                     ^^^^^^^^^^ eight-digit Unicode escape
   >>> [ord(c) for c in s]
   [97, 172, 4660, 8364, 32768]

Using escape sequences for code points greater than 127 is fine in
small doses, but becomes an annoyance if you're using many accented
characters, as you would in a program with messages in French or some
other accent-using language.  You can also assemble strings using the
"chr()" built-in function, but this is even more tedious.

Ideally, you'd want to be able to write literals in your language's
natural encoding.  You could then edit Python source code with your
favorite editor which would display the accented characters naturally,
and have the right characters used at runtime.

Python supports writing source code in UTF-8 by default, but you can
use almost any encoding if you declare the encoding being used.  This
is done by including a special comment as either the first or second
line of the source file:

   #!/usr/bin/env python
   # -*- coding: latin-1 -*-

   u = 'abcdé'
   print(ord(u[-1]))

The syntax is inspired by Emacs's notation for specifying variables
local to a file.  Emacs supports many different variables, but Python
only supports 'coding'.  The "-*-" symbols indicate to Emacs that the
comment is special; they have no significance to Python but are a
convention.  Python looks for "coding: name" or "coding=name" in the
comment.

If you don't include such a comment, the default encoding used will be
UTF-8 as already mentioned.  See also **PEP 263** for more
information.


Propriedades Unicode
--------------------

The Unicode specification includes a database of information about
code points.  For each defined code point, the information includes
the character's name, its category, the numeric value if applicable
(for characters representing numeric concepts such as the Roman
numerals, fractions such as one-third and four-fifths, etc.).  There
are also display-related properties, such as how to use the code point
in bidirectional text.

O programa a seguir exibe alguma informação sobre diversos caracteres
e imprime o valor numérico de um caractere em particular:

   import unicodedata

   u = chr(233) + chr(0x0bf2) + chr(3972) + chr(6000) + chr(13231)

   for i, c in enumerate(u):
       print(i, '%04x' % ord(c), unicodedata.category(c), end=" ")
       print(unicodedata.name(c))

   # Get numeric value of second character
   print(unicodedata.numeric(u[1]))

Quando executado, isso imprime:

   0 00e9 Ll LATIN SMALL LETTER E WITH ACUTE
   1 0bf2 No TAMIL NUMBER ONE THOUSAND
   2 0f84 Mn TIBETAN MARK HALANTA
   3 1770 Lo TAGBANWA LETTER SA
   4 33af So SQUARE RAD OVER S SQUARED
   1000.0

The category codes are abbreviations describing the nature of the
character. These are grouped into categories such as "Letter",
"Number", "Punctuation", or "Symbol", which in turn are broken up into
subcategories.  To take the codes from the above output, "'Ll'" means
'Letter, lowercase', "'No'" means "Number, other", "'Mn'" is "Mark,
nonspacing", and "'So'" is "Symbol, other".  See the General Category
Values section of the Unicode Character Database documentation for a
list of category codes.


Comparando Strings
------------------

Unicode adds some complication to comparing strings, because the same
set of characters can be represented by different sequences of code
points.  For example, a letter like 'ê' can be represented as a single
code point U+00EA, or as U+0065 U+0302, which is the code point for
'e' followed by a code point for 'COMBINING CIRCUMFLEX ACCENT'.  These
will produce the same output when printed, but one is a string of
length 1 and the other is of length 2.

One tool for a case-insensitive comparison is the "casefold()" string
method that converts a string to a case-insensitive form following an
algorithm described by the Unicode Standard.  This algorithm has
special handling for characters such as the German letter 'ß' (code
point U+00DF), which becomes the pair of lowercase letters 'ss'.

   >>> street = 'Gürzenichstraße'
   >>> street.casefold()
   'gürzenichstrasse'

A second tool is the "unicodedata" module's "normalize()" function
that converts strings to one of several normal forms, where letters
followed by a combining character are replaced with single characters.
"normalize()" can be used to perform string comparisons that won't
falsely report inequality if two strings use combining characters
differently:

   import unicodedata

   def compare_strs(s1, s2):
       def NFD(s):
           return unicodedata.normalize('NFD', s)

       return NFD(s1) == NFD(s2)

   single_char = 'ê'
   multiple_chars = '\N{LATIN SMALL LETTER E}\N{COMBINING CIRCUMFLEX ACCENT}'
   print('length of first string=', len(single_char))
   print('length of second string=', len(multiple_chars))
   print(compare_strs(single_char, multiple_chars))

When run, this outputs:

   $ python compare-strs.py
   length of first string= 1
   length of second string= 2
   True

The first argument to the "normalize()" function is a string giving
the desired normalization form, which can be one of 'NFC', 'NFKC',
'NFD', and 'NFKD'.

The Unicode Standard also specifies how to do caseless comparisons:

   import unicodedata

   def compare_caseless(s1, s2):
       def NFD(s):
           return unicodedata.normalize('NFD', s)

       return NFD(NFD(s1).casefold()) == NFD(NFD(s2).casefold())

   # Example usage
   single_char = 'ê'
   multiple_chars = '\N{LATIN CAPITAL LETTER E}\N{COMBINING CIRCUMFLEX ACCENT}'

   print(compare_caseless(single_char, multiple_chars))

This will print "True".  (Why is "NFD()" invoked twice?  Because there
are a few characters that make "casefold()" return a non-normalized
string, so the result needs to be normalized again. See section 3.13
of the Unicode Standard for a discussion and an example.)


Expressões Regulares Unicode
----------------------------

The regular expressions supported by the "re" module can be provided
either as bytes or strings.  Some of the special character sequences
such as "\d" and "\w" have different meanings depending on whether the
pattern is supplied as bytes or a string.  For example, "\d" will
match the characters "[0-9]" in bytes but in strings will match any
character that's in the "'Nd'" category.

The string in this example has the number 57 written in both Thai and
Arabic numerals:

   import re
   p = re.compile(r'\d+')

   s = "Over \u0e55\u0e57 57 flavours"
   m = p.search(s)
   print(repr(m.group()))

When executed, "\d+" will match the Thai numerals and print them out.
If you supply the "re.ASCII" flag to "compile()", "\d+" will match the
substring "57" instead.

Similarly, "\w" matches a wide variety of Unicode characters but only
"[a-zA-Z0-9_]" in bytes or if "re.ASCII" is supplied, and "\s" will
match either Unicode whitespace characters or "[ \t\n\r\f\v]".


Referências
-----------

Some good alternative discussions of Python's Unicode support are:

* Processing Text Files in Python 3, by Nick Coghlan.

* Pragmatic Unicode, a PyCon 2012 presentation by Ned Batchelder.

The "str" type is described in the Python library reference at Tipo
sequência de texto --- str.

The documentation for the "unicodedata" module.

The documentation for the "codecs" module.

Marc-André Lemburg gave a presentation titled "Python and Unicode"
(PDF slides) at EuroPython 2002.  The slides are an excellent overview
of the design of Python 2's Unicode features (where the Unicode string
type is called "unicode" and literals start with "u").


Reading and Writing Unicode Data
================================

Once you've written some code that works with Unicode data, the next
problem is input/output.  How do you get Unicode strings into your
program, and how do you convert Unicode into a form suitable for
storage or transmission?

It's possible that you may not need to do anything depending on your
input sources and output destinations; you should check whether the
libraries used in your application support Unicode natively.  XML
parsers often return Unicode data, for example.  Many relational
databases also support Unicode-valued columns and can return Unicode
values from an SQL query.

Unicode data is usually converted to a particular encoding before it
gets written to disk or sent over a socket.  It's possible to do all
the work yourself: open a file, read an 8-bit bytes object from it,
and convert the bytes with "bytes.decode(encoding)".  However, the
manual approach is not recommended.

One problem is the multi-byte nature of encodings; one Unicode
character can be represented by several bytes.  If you want to read
the file in arbitrary-sized chunks (say, 1024 or 4096 bytes), you need
to write error-handling code to catch the case where only part of the
bytes encoding a single Unicode character are read at the end of a
chunk.  One solution would be to read the entire file into memory and
then perform the decoding, but that prevents you from working with
files that are extremely large; if you need to read a 2 GiB file, you
need 2 GiB of RAM. (More, really, since for at least a moment you'd
need to have both the encoded string and its Unicode version in
memory.)

The solution would be to use the low-level decoding interface to catch
the case of partial coding sequences.  The work of implementing this
has already been done for you: the built-in "open()" function can
return a file-like object that assumes the file's contents are in a
specified encoding and accepts Unicode parameters for methods such as
"read()" and "write()".  This works through "open()"'s *encoding* and
*errors* parameters which are interpreted just like those in
"str.encode()" and "bytes.decode()".

Reading Unicode from a file is therefore simple:

   with open('unicode.txt', encoding='utf-8') as f:
       for line in f:
           print(repr(line))

It's also possible to open files in update mode, allowing both reading
and writing:

   with open('test', encoding='utf-8', mode='w+') as f:
       f.write('\u4500 blah blah blah\n')
       f.seek(0)
       print(repr(f.readline()[:1]))

The Unicode character "U+FEFF" is used as a byte-order mark (BOM), and
is often written as the first character of a file in order to assist
with autodetection of the file's byte ordering.  Some encodings, such
as UTF-16, expect a BOM to be present at the start of a file; when
such an encoding is used, the BOM will be automatically written as the
first character and will be silently dropped when the file is read.
There are variants of these encodings, such as 'utf-16-le' and
'utf-16-be' for little-endian and big-endian encodings, that specify
one particular byte ordering and don't skip the BOM.

In some areas, it is also convention to use a "BOM" at the start of
UTF-8 encoded files; the name is misleading since UTF-8 is not byte-
order dependent. The mark simply announces that the file is encoded in
UTF-8.  For reading such files, use the 'utf-8-sig' codec to
automatically skip the mark if present.


Nomes de arquivos Unicode
-------------------------

Most of the operating systems in common use today support filenames
that contain arbitrary Unicode characters.  Usually this is
implemented by converting the Unicode string into some encoding that
varies depending on the system.  Today Python is converging on using
UTF-8: Python on MacOS has used UTF-8 for several versions, and Python
3.6 switched to using UTF-8 on Windows as well.  On Unix systems,
there will only be a *filesystem encoding*. if you've set the "LANG"
or "LC_CTYPE" environment variables; if you haven't, the default
encoding is again UTF-8.

The "sys.getfilesystemencoding()" function returns the encoding to use
on your current system, in case you want to do the encoding manually,
but there's not much reason to bother.  When opening a file for
reading or writing, you can usually just provide the Unicode string as
the filename, and it will be automatically converted to the right
encoding for you:

   filename = 'filename\u4500abc'
   with open(filename, 'w') as f:
       f.write('blah\n')

Functions in the "os" module such as "os.stat()" will also accept
Unicode filenames.

The "os.listdir()" function returns filenames, which raises an issue:
should it return the Unicode version of filenames, or should it return
bytes containing the encoded versions?  "os.listdir()" can do both,
depending on whether you provided the directory path as bytes or a
Unicode string.  If you pass a Unicode string as the path, filenames
will be decoded using the filesystem's encoding and a list of Unicode
strings will be returned, while passing a byte path will return the
filenames as bytes.  For example, assuming the default *filesystem
encoding* is UTF-8, running the following program:

   fn = 'filename\u4500abc'
   f = open(fn, 'w')
   f.close()

   import os
   print(os.listdir(b'.'))
   print(os.listdir('.'))

will produce the following output:

   $ python listdir-test.py
   [b'filename\xe4\x94\x80abc', ...]
   ['filename\u4500abc', ...]

The first list contains UTF-8-encoded filenames, and the second list
contains the Unicode versions.

Note that on most occasions, you should can just stick with using
Unicode with these APIs.  The bytes APIs should only be used on
systems where undecodable file names can be present; that's pretty
much only Unix systems now.


Tips for Writing Unicode-aware Programs
---------------------------------------

This section provides some suggestions on writing software that deals
with Unicode.

A dica mais importante é:

   Software should only work with Unicode strings internally, decoding
   the input data as soon as possible and encoding the output only at
   the end.

If you attempt to write processing functions that accept both Unicode
and byte strings, you will find your program vulnerable to bugs
wherever you combine the two different kinds of strings.  There is no
automatic encoding or decoding: if you do e.g. "str + bytes", a
"TypeError" will be raised.

When using data coming from a web browser or some other untrusted
source, a common technique is to check for illegal characters in a
string before using the string in a generated command line or storing
it in a database.  If you're doing this, be careful to check the
decoded string, not the encoded bytes data; some encodings may have
interesting properties, such as not being bijective or not being fully
ASCII-compatible.  This is especially true if the input data also
specifies the encoding, since the attacker can then choose a clever
way to hide malicious text in the encoded bytestream.


Converting Between File Encodings
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The "StreamRecoder" class can transparently convert between encodings,
taking a stream that returns data in encoding #1 and behaving like a
stream returning data in encoding #2.

For example, if you have an input file *f* that's in Latin-1, you can
wrap it with a "StreamRecoder" to return bytes encoded in UTF-8:

   new_f = codecs.StreamRecoder(f,
       # en/decoder: used by read() to encode its results and
       # by write() to decode its input.
       codecs.getencoder('utf-8'), codecs.getdecoder('utf-8'),

       # reader/writer: used to read and write to the stream.
       codecs.getreader('latin-1'), codecs.getwriter('latin-1') )


Files in an Unknown Encoding
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

What can you do if you need to make a change to a file, but don't know
the file's encoding?  If you know the encoding is ASCII-compatible and
only want to examine or modify the ASCII parts, you can open the file
with the "surrogateescape" error handler:

   with open(fname, 'r', encoding="ascii", errors="surrogateescape") as f:
       data = f.read()

   # make changes to the string 'data'

   with open(fname + '.new', 'w',
             encoding="ascii", errors="surrogateescape") as f:
       f.write(data)

The "surrogateescape" error handler will decode any non-ASCII bytes as
code points in a special range running from U+DC80 to U+DCFF.  These
code points will then turn back into the same bytes when the
"surrogateescape" error handler is used to encode the data and write
it back out.


Referências
-----------

One section of Mastering Python 3 Input/Output, a PyCon 2010 talk by
David Beazley, discusses text processing and binary data handling.

The PDF slides for Marc-André Lemburg's presentation "Writing Unicode-
aware Applications in Python" discuss questions of character encodings
as well as how to internationalize and localize an application.  These
slides cover Python 2.x only.

The Guts of Unicode in Python is a PyCon 2013 talk by Benjamin
Peterson that discusses the internal Unicode representation in Python
3.3.


Reconhecimentos
===============

The initial draft of this document was written by Andrew Kuchling. It
has since been revised further by Alexander Belopolsky, Georg Brandl,
Andrew Kuchling, and Ezio Melotti.

Thanks to the following people who have noted errors or offered
suggestions on this article: Éric Araujo, Nicholas Bastin, Nick
Coghlan, Marius Gedminas, Kent Johnson, Ken Krugler, Marc-André
Lemburg, Martin von Löwis, Terry J. Reedy, Serhiy Storchaka, Eryk Sun,
Chad Whitacre, Graham Wideman.
