Utilitários do sistema operacional
**********************************

PyObject *PyOS_FSPath(PyObject *path)
    *Retorna valor: Nova referência.** Parte da ABI Estável desde a
   versão 3.6.*

   Retorna a representação do sistema de arquivos para *path*. Se o
   objeto for um objeto "str" ou "bytes", então uma nova *referência
   forte* é retornada. Se o objeto implementa a interface
   "os.PathLike", então "__fspath__()" é retornado desde que seja um
   objeto "str" ou "bytes". Caso contrário, "TypeError" é levantada e
   "NULL" é retornado.

   Adicionado na versão 3.6.

int Py_FdIsInteractive(FILE *fp, const char *filename)

   Retorna verdadeiro (não zero) se o arquivo padrão de E/S *fp* com o
   nome *filename* for considerado interativo. Este é o caso dos
   arquivos para os quais "isatty(fileno(fp))" é verdade. Se
   "PyConfig.interactive" for não zero, esta função também retorna
   true se o ponteiro *filename* for "NULL" ou se o nome for igual a
   uma das strings "'<stdin>'" ou "'???'".

   Esta função não deve ser chamada antes da inicialização do Python.

void PyOS_BeforeFork()
    * Parte da ABI Estável on platforms with fork() desde a versão
   3.7.*

   Função para preparar algum estado interno antes de ser feito um
   fork do processo. Isso deve ser chamado antes de chamar "fork()" ou
   qualquer função semelhante que clone o processo atual. Disponível
   apenas em sistemas onde "fork()" é definido.

   Aviso:

     A chamada C "fork()" só deve ser feita a partir da thread "main"
     (do interpretador "main"). O mesmo vale para "PyOS_BeforeFork()".

   Adicionado na versão 3.7.

void PyOS_AfterFork_Parent()
    * Parte da ABI Estável on platforms with fork() desde a versão
   3.7.*

   Função para atualizar algum estado interno depois de ser feito um
   fork do processo. Isso deve ser chamado a partir do processo pai
   depois de chamar "fork()" ou qualquer função semelhante que clone o
   processo atual, independentemente da clonagem do processo ter sido
   bem-sucedida ou não. Disponível apenas em sistemas onde "fork()" é
   definido.

   Aviso:

     A chamada C "fork()" só deve ser feita a partir da thread "main"
     (do interpretador "main"). O mesmo vale para
     "PyOS_AfterFork_Parent()".

   Adicionado na versão 3.7.

void PyOS_AfterFork_Child()
    * Parte da ABI Estável on platforms with fork() desde a versão
   3.7.*

   Função para atualizar o estado interno do interpretador depois de
   ser feito um fork do processo. Isso deve ser chamado a partir do
   processo filho depois de chamar "fork()" ou qualquer função
   semelhante que clone o processo atual, se houver alguma chance do
   processo ter uma chamada de retorno para o interpretador Python.
   Disponível apenas em sistemas onde "fork()" é definido.

   Aviso:

     A chamada C "fork()" só deve ser feita a partir da thread "main"
     (do interpretador "main"). O mesmo vale para
     "PyOS_AfterFork_Child()".

   Adicionado na versão 3.7.

   Ver também:

     "os.register_at_fork()" permite registrar funções personalizadas
     do Python para serem chamadas por "PyOS_BeforeFork()",
     "PyOS_AfterFork_Parent()" e  "PyOS_AfterFork_Child()".

void PyOS_AfterFork()
    * Parte da ABI Estável on platforms with fork().*

   Função para atualizar algum estado interno após ser feito um fork
   de processo; isso deve ser chamado no novo processo se o
   interpretador do Python continuar a ser usado. Se um novo
   executável é carregado no novo processo, esta função não precisa
   ser chamada.

   Descontinuado desde a versão 3.7: Esta função foi sucedida por
   "PyOS_AfterFork_Child()".

int PyOS_CheckStack()
    * Parte da ABI Estável on platforms with USE_STACKCHECK desde a
   versão 3.7.*

   Retorna verdadeiro quando o interpretador fica sem espaço na pilha.
   Esta é uma verificação confiável, mas só está disponível quando
   "USE_STACKCHECK" é definido (atualmente em certas versões do
   Windows usando o compilador Microsoft Visual C++). "USE_STACKCHECK"
   será definido automaticamente; você nunca deve alterar a definição
   em seu próprio código.

typedef void (*PyOS_sighandler_t)(int)
    * Parte da ABI Estável.*

PyOS_sighandler_t PyOS_getsig(int i)
    * Parte da ABI Estável.*

   Retorna o manipulador de sinal atual para o sinal *i*. Este é um
   invólucro fino em torno de "sigaction()" ou "signal()". Não chame
   essas funções diretamente!

PyOS_sighandler_t PyOS_setsig(int i, PyOS_sighandler_t h)
    * Parte da ABI Estável.*

   Define o manipulador de sinal para o sinal *i* como *h*; retornar o
   manipulador de sinal antigo. Este é um invólucro fino em torno de
   "sigaction()" ou "signal()". Não chame essas funções diretamente!

wchar_t *Py_DecodeLocale(const char *arg, size_t *size)
    * Parte da ABI Estável desde a versão 3.7.*

   Aviso:

     Esta função não deve ser chamada diretamente: use a API
     "PyConfig" com a função "PyConfig_SetBytesString()" que garante
     que Python esteja pré-inicializado.Esta função não deve ser
     chamada antes de Python estar pré-inicializado e para que a
     localidade LC_CTYPE seja configurada corretamente: consulte a
     função "Py_PreInitialize()".

   Decodifica uma string de bytes do *tratador de erros e codificação
   do sistema de arquivos*. Se o tratador de erros for o tratador de
   errors surrogateescape, bytes não decodificáveis são decodificados
   como caracteres no intervalo U+DC80..U+DCFF; e se uma string de
   bytes puder ser decodificada como um caractere substituto, os bytes
   são escapados usando o tratador de erros surrogateescape em vez de
   decodificá-los.

   Retorna um ponteiro para uma string de caracteres largos recém-
   alocada, usa "PyMem_RawFree()" para liberar a memória. Se o tamanho
   não for "NULL", escreve o número de caracteres largos excluindo o
   caractere nulo em "*size"

   Retorna "NULL" em erro de decodificação ou erro de alocação de
   memória. Se *size* não for "NULL", "*size" é definido como
   "(size_t)-1" em erro de memória ou definido como "(size_t)-2" em
   erro de decodificação.

   *tratador de erros e codificação do sistema de arquivos* são
   selecionados por "PyConfig_Read()": veja os membros
   "filesystem_encoding" e "filesystem_errors" de "PyConfig".

   Erros de decodificação nunca devem acontecer, a menos que haja um
   bug na biblioteca C.

   Use a função "Py_EncodeLocale()" para codificar a string de
   caracteres de volta para uma string de bytes.

   Ver também:

     As funções "PyUnicode_DecodeFSDefaultAndSize()" e
     "PyUnicode_DecodeLocaleAndSize()".

   Adicionado na versão 3.5.

   Alterado na versão 3.7: A função agora usa a codificação UTF-8 no
   Modo UTF-8 do Python.

   Alterado na versão 3.8: A função agora usa a codificação UTF-8 no
   Windows se "PyPreConfig.legacy_windows_fs_encoding" for zero;

char *Py_EncodeLocale(const wchar_t *text, size_t *error_pos)
    * Parte da ABI Estável desde a versão 3.7.*

   Encode a wide character string to the *filesystem encoding and
   error handler*. If the error handler is surrogateescape error
   handler, surrogate characters in the range U+DC80..U+DCFF are
   converted to bytes 0x80..0xFF.

   Return a pointer to a newly allocated byte string, use
   "PyMem_Free()" to free the memory. Return "NULL" on encoding error
   or memory allocation error.

   If error_pos is not "NULL", "*error_pos" is set to "(size_t)-1" on
   success,  or set to the index of the invalid character on encoding
   error.

   *tratador de erros e codificação do sistema de arquivos* são
   selecionados por "PyConfig_Read()": veja os membros
   "filesystem_encoding" e "filesystem_errors" de "PyConfig".

   Use the "Py_DecodeLocale()" function to decode the bytes string
   back to a wide character string.

   Aviso:

     Esta função não deve ser chamada antes de Python estar
     pré-inicializado e para que a localidade LC_CTYPE seja
     configurada corretamente: consulte a função "Py_PreInitialize()".

   Ver também:

     The "PyUnicode_EncodeFSDefault()" and "PyUnicode_EncodeLocale()"
     functions.

   Adicionado na versão 3.5.

   Alterado na versão 3.7: A função agora usa a codificação UTF-8 no
   Modo UTF-8 do Python.

   Alterado na versão 3.8: The function now uses the UTF-8 encoding on
   Windows if "PyPreConfig.legacy_windows_fs_encoding" is zero.

FILE *Py_fopen(PyObject *path, const char *mode)

   Similar to "fopen()", but *path* is a Python object and an
   exception is set on error.

   *path* must be a "str" object, a "bytes" object, or a *path-like
   object*.

   On success, return the new file pointer. On error, set an exception
   and return "NULL".

   The file must be closed by "Py_fclose()" rather than calling
   directly "fclose()".

   The file descriptor is created non-inheritable (**PEP 446**).

   The caller must have an *attached thread state*.

   Adicionado na versão 3.14.

int Py_fclose(FILE *file)

   Close a file that was opened by "Py_fopen()".

   On success, return "0". On error, return "EOF" and "errno" is set
   to indicate the error. In either case, any further access
   (including another call to "Py_fclose()") to the stream results in
   undefined behavior.

   Adicionado na versão 3.14.


System Functions
****************

These are utility functions that make functionality from the "sys"
module accessible to C code.  They all work with the current
interpreter thread's "sys" module's dict, which is contained in the
internal thread state structure.

PyObject *PySys_GetObject(const char *name)
    *Retorna valor: Referência emprestada.** Parte da ABI Estável.*

   Return the object *name* from the "sys" module or "NULL" if it does
   not exist, without setting an exception.

int PySys_SetObject(const char *name, PyObject *v)
    * Parte da ABI Estável.*

   Set *name* in the "sys" module to *v* unless *v* is "NULL", in
   which case *name* is deleted from the sys module. Returns "0" on
   success, "-1" on error.

void PySys_ResetWarnOptions()
    * Parte da ABI Estável.*

   Reset "sys.warnoptions" to an empty list. This function may be
   called prior to "Py_Initialize()".

   Deprecated since version 3.13, will be removed in version 3.15:
   Clear "sys.warnoptions" and "warnings.filters" instead.

void PySys_WriteStdout(const char *format, ...)
    * Parte da ABI Estável.*

   Write the output string described by *format* to "sys.stdout".  No
   exceptions are raised, even if truncation occurs (see below).

   *format* should limit the total size of the formatted output string
   to 1000 bytes or less -- after 1000 bytes, the output string is
   truncated. In particular, this means that no unrestricted "%s"
   formats should occur; these should be limited using "%.<N>s" where
   <N> is a decimal number calculated so that <N> plus the maximum
   size of other formatted text does not exceed 1000 bytes.  Also
   watch out for "%f", which can print hundreds of digits for very
   large numbers.

   If a problem occurs, or "sys.stdout" is unset, the formatted
   message is written to the real (C level) *stdout*.

void PySys_WriteStderr(const char *format, ...)
    * Parte da ABI Estável.*

   As "PySys_WriteStdout()", but write to "sys.stderr" or *stderr*
   instead.

void PySys_FormatStdout(const char *format, ...)
    * Parte da ABI Estável.*

   Function similar to PySys_WriteStdout() but format the message
   using "PyUnicode_FromFormatV()" and don't truncate the message to
   an arbitrary length.

   Adicionado na versão 3.2.

void PySys_FormatStderr(const char *format, ...)
    * Parte da ABI Estável.*

   As "PySys_FormatStdout()", but write to "sys.stderr" or *stderr*
   instead.

   Adicionado na versão 3.2.

PyObject *PySys_GetXOptions()
    *Retorna valor: Referência emprestada.** Parte da ABI Estável
   desde a versão 3.7.*

   Return the current dictionary of "-X" options, similarly to
   "sys._xoptions".  On error, "NULL" is returned and an exception is
   set.

   Adicionado na versão 3.2.

int PySys_Audit(const char *event, const char *format, ...)
    * Parte da ABI Estável desde a versão 3.13.*

   Raise an auditing event with any active hooks. Return zero for
   success and non-zero with an exception set on failure.

   The *event* string argument must not be *NULL*.

   If any hooks have been added, *format* and other arguments will be
   used to construct a tuple to pass. Apart from "N", the same format
   characters as used in "Py_BuildValue()" are available. If the built
   value is not a tuple, it will be added into a single-element tuple.

   The "N" format option must not be used. It consumes a reference,
   but since there is no way to know whether arguments to this
   function will be consumed, using it may cause reference leaks.

   Note that "#" format characters should always be treated as
   "Py_ssize_t", regardless of whether "PY_SSIZE_T_CLEAN" was defined.

   "sys.audit()" performs the same function from Python code.

   See also "PySys_AuditTuple()".

   Adicionado na versão 3.8.

   Alterado na versão 3.8.2: Require "Py_ssize_t" for "#" format
   characters. Previously, an unavoidable deprecation warning was
   raised.

int PySys_AuditTuple(const char *event, PyObject *args)
    * Parte da ABI Estável desde a versão 3.13.*

   Similar to "PySys_Audit()", but pass arguments as a Python object.
   *args* must be a "tuple". To pass no arguments, *args* can be
   *NULL*.

   Adicionado na versão 3.13.

int PySys_AddAuditHook(Py_AuditHookFunction hook, void *userData)

   Append the callable *hook* to the list of active auditing hooks.
   Return zero on success and non-zero on failure. If the runtime has
   been initialized, also set an error on failure. Hooks added through
   this API are called for all interpreters created by the runtime.

   O ponteiro *userData* é passado para a função de gancho. Como as
   funções de gancho podem ser chamadas de diferentes tempos de
   execução, esse ponteiro não deve se referir diretamente ao estado
   do Python.

   This function is safe to call before "Py_Initialize()". When called
   after runtime initialization, existing audit hooks are notified and
   may silently abort the operation by raising an error subclassed
   from "Exception" (other errors will not be silenced).

   The hook function is always called with an *attached thread state*
   by the Python interpreter that raised the event.

   See **PEP 578** for a detailed description of auditing.  Functions
   in the runtime and standard library that raise events are listed in
   the audit events table. Details are in each function's
   documentation.

   If the interpreter is initialized, this function raises an auditing
   event "sys.addaudithook" with no arguments. If any existing hooks
   raise an exception derived from "Exception", the new hook will not
   be added and the exception is cleared. As a result, callers cannot
   assume that their hook has been added unless they control all
   existing hooks.

   typedef int (*Py_AuditHookFunction)(const char *event, PyObject *args, void *userData)

      The type of the hook function. *event* is the C string event
      argument passed to "PySys_Audit()" or "PySys_AuditTuple()".
      *args* is guaranteed to be a "PyTupleObject". *userData* is the
      argument passed to PySys_AddAuditHook().

   Adicionado na versão 3.8.


Process Control
***************

void Py_FatalError(const char *message)
    * Parte da ABI Estável.*

   Print a fatal error message and kill the process.  No cleanup is
   performed. This function should only be invoked when a condition is
   detected that would make it dangerous to continue using the Python
   interpreter; e.g., when the object administration appears to be
   corrupted.  On Unix, the standard C library function "abort()" is
   called which will attempt to produce a "core" file.

   The "Py_FatalError()" function is replaced with a macro which logs
   automatically the name of the current function, unless the
   "Py_LIMITED_API" macro is defined.

   Alterado na versão 3.9: Log the function name automatically.

void Py_Exit(int status)
    * Parte da ABI Estável.*

   Exit the current process.  This calls "Py_FinalizeEx()" and then
   calls the standard C library function "exit(status)".  If
   "Py_FinalizeEx()" indicates an error, the exit status is set to
   120.

   Alterado na versão 3.6: Errors from finalization no longer ignored.

int Py_AtExit(void (*func)())
    * Parte da ABI Estável.*

   Register a cleanup function to be called by "Py_FinalizeEx()".  The
   cleanup function will be called with no arguments and should return
   no value.  At most 32 cleanup functions can be registered.  When
   the registration is successful, "Py_AtExit()" returns "0"; on
   failure, it returns "-1".  The cleanup function registered last is
   called first. Each cleanup function will be called at most once.
   Since Python's internal finalization will have completed before the
   cleanup function, no Python APIs should be called by *func*.

   Ver também:

     "PyUnstable_AtExit()" for passing a "void *data" argument.
