"site" --- Gancho de configuração específico do site
****************************************************

**Código-fonte:** Lib/site.py

======================================================================

**Este módulo é importado automaticamente durante a inicialização.** A
importação automática pode ser suprimida usando a opção "-S" do
interpretador.

A importação deste módulo anexará os caminhos específicos do site ao
caminho de pesquisa do módulo e adicionará alguns recursos internos, a
menos que "-S" tenha sido usada. Nesse caso, este módulo pode ser
importado com segurança, sem modificações automáticas no caminho de
pesquisa do módulo ou adições aos componentes internos. Para acionar
explicitamente as adições habituais específicas do site, chame a
função "site.main()".

Alterado na versão 3.3: A importação do módulo usado para acionar a
manipulação de caminhos, mesmo ao usar "-S".

It starts by constructing up to four directories from a head and a
tail part. For the head part, it uses "sys.prefix" and
"sys.exec_prefix"; empty heads are skipped.  For the tail part, it
uses the empty string and then "lib/site-packages" (on Windows) or
"lib/python*X.Y*/site-packages" (on Unix and macOS).  For each of the
distinct head-tail combinations, it sees if it refers to an existing
directory, and if so, adds it to "sys.path" and also inspects the
newly added path for configuration files.

Alterado na versão 3.5: Suporte para o diretório "site-python" foi
removido.

Se um arquivo chamado "pyvenv.cfg" existir em um diretório acima,
então sys.executable, sys.prefix e sys.exec_prefix serão configurados
para esse diretório e também será verificado se há site-packages
(sys.base_prefix e sys.base_exec_prefix será sempre os prefixos
"reais" da instalação do Python). Se "pyvenv.cfg" (um arquivo de
configuração de autoinicialização) contiver a chave "include-system-
site-packages" configurada para algo diferente de "true" (sem
distinção entre maiúsculas e minúsculas), os prefixos no nível do
sistema não serão pesquisados quanto ao site-packages; caso contrário,
eles irão.

Um arquivo de configuração de caminho é aquele cujo nome tem o formato
"*name*.pth" e que existe em um dos quatro diretórios mencionados
acima; seu conteúdo são itens adicionais (um por linha) a serem
adicionados ao "sys.path". Itens inexistentes nunca são adicionados ao
"sys.path" e não é verificado se o item se refere a um diretório, e
não a um arquivo. Nenhum item é adicionado ao "sys.path" mais de uma
vez. Linhas em branco e linhas iniciadas com "#" são ignoradas. Linhas
iniciadas com "import" (seguidas de espaço ou tabulação) são
executadas.

Nota:

  Uma linha executável em um arquivo ".pth" é executada a cada
  inicialização do Python, independentemente de um módulo em
  particular ser realmente usado. Seu impacto deve, portanto, ser
  reduzido ao mínimo. O objetivo principal das linhas executáveis ​é
  tornar o(s) módulo(s) correspondente(s) importável (carregar ganchos
  de importação de terceiros, ajustar "PATH" etc). Qualquer outra
  inicialização deve ser feita na importação real de um módulo, se e
  quando isso acontecer. Limitar um fragmento de código a uma única
  linha é uma medida deliberada para desencorajar colocar qualquer
  coisa mais complexa aqui.

Por exemplo, suponha que "sys.prefix" e "sys.exec_prefix" sejam
definidos com "/usr/local". A biblioteca Python X.Y é instalado em
"/usr/local/lib/python*X.Y*". Suponha que isso tenha um subdiretório
"/usr/local/lib/python*X.Y*/site-packages" com três subsubdiretórios,
"foo", "bar" e "spam", e dois caminhos arquivos de configuração,
"foo.pth" e "bar.pth".  Presuma que "foo.pth" contém o seguinte:

   # foo package configuration

   foo
   bar
   bletch

e que "bar.pth" contém:

   # bar package configuration

   bar

Em seguida, os seguintes diretórios específicos da versão são
adicionados a "sys.path", nesta ordem:

   /usr/local/lib/pythonX.Y/site-packages/bar
   /usr/local/lib/pythonX.Y/site-packages/foo

Observe que "bletch" é omitido porque não existe; o diretório "bar"
precede o diretório "foo" porque "bar.pth" vem em ordem alfabética
antes de "foo.pth"; e "spam" é omitido porque não é mencionado em
nenhum dos arquivos de configuração de caminho.

After these path manipulations, an attempt is made to import a module
named "sitecustomize", which can perform arbitrary site-specific
customizations. It is typically created by a system administrator in
the site-packages directory.  If this import fails with an
"ImportError" or its subclass exception, and the exception's "name"
attribute equals to "'sitecustomize'", it is silently ignored.  If
Python is started without output streams available, as with
"pythonw.exe" on Windows (which is used by default to start IDLE),
attempted output from "sitecustomize" is ignored.  Any other exception
causes a silent and perhaps mysterious failure of the process.

After this, an attempt is made to import a module named
"usercustomize", which can perform arbitrary user-specific
customizations, if "ENABLE_USER_SITE" is true.  This file is intended
to be created in the user site-packages directory (see below), which
is part of "sys.path" unless disabled by "-s".  If this import fails
with an "ImportError" or its subclass exception, and the exception's
"name" attribute equals to "'usercustomize'", it is silently ignored.

Note that for some non-Unix systems, "sys.prefix" and
"sys.exec_prefix" are empty, and the path manipulations are skipped;
however the import of "sitecustomize" and "usercustomize" is still
attempted.


Configuração Readline
=====================

On systems that support "readline", this module will also import and
configure the "rlcompleter" module, if Python is started in
interactive mode and without the "-S" option. The default behavior is
enable tab-completion and to use "~/.python_history" as the history
save file.  To disable it, delete (or override) the
"sys.__interactivehook__" attribute in your "sitecustomize" or
"usercustomize" module or your "PYTHONSTARTUP" file.

Alterado na versão 3.4: Activation of rlcompleter and history was made
automatic.


Conteúdo do módulo
==================

site.PREFIXES

   A list of prefixes for site-packages directories.

site.ENABLE_USER_SITE

   Flag showing the status of the user site-packages directory.
   "True" means that it is enabled and was added to "sys.path".
   "False" means that it was disabled by user request (with "-s" or
   "PYTHONNOUSERSITE").  "None" means it was disabled for security
   reasons (mismatch between user or group id and effective id) or by
   an administrator.

site.USER_SITE

   Path to the user site-packages for the running Python.  Can be
   "None" if "getusersitepackages()" hasn't been called yet.  Default
   value is "~/.local/lib/python*X.Y*/site-packages" for UNIX and non-
   framework macOS builds, "~/Library/Python/*X.Y*/lib/python/site-
   packages" for macOS framework builds, and
   "*%APPDATA%*\Python\Python*XY*\site-packages" on Windows.  This
   directory is a site directory, which means that ".pth" files in it
   will be processed.

site.USER_BASE

   Path to the base directory for the user site-packages.  Can be
   "None" if "getuserbase()" hasn't been called yet.  Default value is
   "~/.local" for UNIX and macOS non-framework builds,
   "~/Library/Python/*X.Y*" for macOS framework builds, and
   "*%APPDATA%*\Python" for Windows.  This value is used by Distutils
   to compute the installation directories for scripts, data files,
   Python modules, etc. for the user installation scheme. See also
   "PYTHONUSERBASE".

site.main()

   Adds all the standard site-specific directories to the module
   search path.  This function is called automatically when this
   module is imported, unless the Python interpreter was started with
   the "-S" flag.

   Alterado na versão 3.3: This function used to be called
   unconditionally.

site.addsitedir(sitedir, known_paths=None)

   Add a directory to sys.path and process its ".pth" files.
   Typically used in "sitecustomize" or "usercustomize" (see above).

site.getsitepackages()

   Return a list containing all global site-packages directories.

   Novo na versão 3.2.

site.getuserbase()

   Return the path of the user base directory, "USER_BASE".  If it is
   not initialized yet, this function will also set it, respecting
   "PYTHONUSERBASE".

   Novo na versão 3.2.

site.getusersitepackages()

   Return the path of the user-specific site-packages directory,
   "USER_SITE".  If it is not initialized yet, this function will also
   set it, respecting "USER_BASE".  To determine if the user-specific
   site-packages was added to "sys.path" "ENABLE_USER_SITE" should be
   used.

   Novo na versão 3.2.


Interface de linha de comando
=============================

The "site" module also provides a way to get the user directories from
the command line:

   $ python3 -m site --user-site
   /home/user/.local/lib/python3.3/site-packages

If it is called without arguments, it will print the contents of
"sys.path" on the standard output, followed by the value of
"USER_BASE" and whether the directory exists, then the same thing for
"USER_SITE", and finally the value of "ENABLE_USER_SITE".

--user-base

   Print the path to the user base directory.

--user-site

   Print the path to the user site-packages directory.

If both options are given, user base and user site will be printed
(always in this order), separated by "os.pathsep".

If any option is given, the script will exit with one of these values:
"0" if the user site-packages directory is enabled, "1" if it was
disabled by the user, "2" if it is disabled for security reasons or by
an administrator, and a value greater than 2 if there is an error.

Ver também: **PEP 370** -- Diretório site-packages por usuário.
