"dis" --- Disassembler de bytecode do Python
********************************************

**Código-fonte:** Lib/dis.py

======================================================================

O módulo "dis" oferece suporte à análise de *bytecode* do CPython,
desmontando-o. O bytecode do CPython que o módulo leva como entrada é
definido no arquivo "Include/opcode.h" e usado pelo compilador e pelo
interpretador.

**CPython implementation detail:** O bytecode é um detalhe de
implementação do interpretador CPython. Não há garantias de que
bytecodes não serão adicionados, removidos ou alterados entre as
versões do Python. O uso deste módulo não deve ser considerado que
funcionará em todas as VMs do Python ou mesmo versões do Python.

Alterado na versão 3.6: Cada instrução ocupa 2 bytes. Anteriormente, o
número de bytes variava de acordo com a instrução.

Exemplo: Dada a função "myfunc()":

   def myfunc(alist):
       return len(alist)

o seguinte comando pode ser usado para exibir a desmontagem da função
"myfunc()":

   >>> dis.dis(myfunc)
     2           0 LOAD_GLOBAL              0 (len)
                 2 LOAD_FAST                0 (alist)
                 4 CALL_FUNCTION            1
                 6 RETURN_VALUE

(O "2" é o número da linha).


Análise de bytecode
===================

Novo na versão 3.4.

A API de análise de bytecode permite que partes do código Python sejam
encapsuladas em um objeto "Bytecode" que facilite o acesso aos
detalhes do código compilado.

class dis.Bytecode(x, *, first_line=None, current_offset=None)

   Analisa o bytecode correspondente a uma função, um gerador, um
   gerador assíncrono, uma corrotina, um método, uma string de código-
   fonte, ou um objeto de código (conforme retornado por "compile()").

   Esta é um invólucro de conveniência que encapsula muitas das
   funções listadas abaixo, principalmente a "get_instructions()", já
   que iterar sobre sobre uma instância de "Bytecode" produz operações
   bytecode como instâncias de "Instruction".

   Se *first_line* não for "None", ele indica o número de linha que
   deve ser reportado para a primeira linha de código-fonte no código
   desmontado.  Caso contrário, a informação de linha de código-fonte
   (se houver) é extraída diretamente da desconstrução do objeto de
   código.

   Se *current_offset* não for "None", ele é um deslocamento em
   instruções no código desconstruído. Definir este argumento
   significa que o "dis()" vai mostrar um marcador de "instrução
   atual" sobre o opcode especificado.

   classmethod from_traceback(tb)

      Constrói uma instância de "Bytecode" a partir do traceback
      fornecido, definindo *current_offset* apontando para a instrução
      responsável pela exceção.

   codeobj

      O objeto de código compilado.

   first_line

      A primeira linha de código-fonte do objeto de código (caso
      disponível).

   dis()

      Retorna uma visualização formatada das operações em bytecode (as
      mesmas que seriam impressas pela "dis.dis()", mas retornadas
      como uma string multilinha).

   info()

      Retorna uma string multilinha formatada com informação detalhada
      sobre o objeto de código, como "code_info()".

   Alterado na versão 3.7: Este método agora lida com objetos de
   corrotina e de gerador assíncrono.

Exemplo:

   >>> bytecode = dis.Bytecode(myfunc)
   >>> for instr in bytecode:
   ...     print(instr.opname)
   ...
   LOAD_GLOBAL
   LOAD_FAST
   CALL_FUNCTION
   RETURN_VALUE


Funções de análise
==================

O módulo "dis" também define as seguintes funções que convertem a
entrada diretamente para a saída desejada. Elas podem ser úteis se
somente uma única operação está sendo feita, de forma que o objeto de
análise intermediário não é útil:

dis.code_info(x)

   Retorna uma string multilinha formatada com informação detalhada
   sobre o objeto de código correspondente à função, gerador, gerador
   assíncrono, corrotina, método, string de código-fonte ou objeto de
   código fornecido.

   Observe que o conteúdo exato de strings de informação de código são
   altamente dependentes da implementação e podem mudar de forma
   arbitrária através de VMs Python ou lançamentos do Python.

   Novo na versão 3.2.

   Alterado na versão 3.7: Este método agora lida com objetos de
   corrotina e de gerador assíncrono.

dis.show_code(x, *, file=None)

   Imprime no arquivo *file* (ou "sys.stdout" caso *file* não seja
   especificado) informações detalhadas sobre o objeto de código
   correspondente à função, método, string de código-fonte fornecido.

   Este é um atalho conveniente para "print(code_info(x), file=file)",
   destinado à exploração interativa no prompt do interpretador.

   Novo na versão 3.2.

   Alterado na versão 3.4: Adicionado o parâmetro *file*.

dis.dis(x=None, *, file=None, depth=None)

   Disassemble the *x* object.  *x* can denote either a module, a
   class, a method, a function, a generator, an asynchronous
   generator, a coroutine, a code object, a string of source code or a
   byte sequence of raw bytecode. For a module, it disassembles all
   functions. For a class, it disassembles all methods (including
   class and static methods). For a code object or sequence of raw
   bytecode, it prints one line per bytecode instruction. It also
   recursively disassembles nested code objects (the code of
   comprehensions, generator expressions and nested functions, and the
   code used for building nested classes). Strings are first compiled
   to code objects with the "compile()" built-in function before being
   disassembled.  If no object is provided, this function disassembles
   the last traceback.

   O resultado é escrito como texto no arquivo *file* caso tenha sido
   fornecido como argumento, ou para "sys.stdout" caso contrário.

   A profundidade máxima de recursão é limitada por *depth* a menos
   que seja "None". "depth=0" significa não fazer recursão.

   Alterado na versão 3.4: Adicionado o parâmetro *file*.

   Alterado na versão 3.7: Foi implementada a desmontagem recursiva, e
   adicionado o parâmetro *depth*.

   Alterado na versão 3.7: Este método agora lida com objetos de
   corrotina e de gerador assíncrono.

dis.distb(tb=None, *, file=None)

   Desmonta a função no topo da pilha de um traceback, usando o último
   traceback caso nenhum tenha sido passado.  A instrução que causou a
   exceção é indicada.

   O resultado é escrito como texto no arquivo *file* caso tenha sido
   fornecido como argumento, ou para "sys.stdout" caso contrário.

   Alterado na versão 3.4: Adicionado o parâmetro *file*.

dis.disassemble(code, lasti=-1, *, file=None)
dis.disco(code, lasti=-1, *, file=None)

   Desmonta um objeto de código, indicando a última instrução se
   *lasti* tiver sido fornecido.  A saída é dividida em colunas da
   seguinte forma:

   1. o número da linha, para a primeira instrução de cada linha

   2. a instrução atual, indicada por "-->",

   3. um rótulo da instrução, indicado com ">>",

   4. o endereço da instrução

   5. o nome do código da operação,

   6. os parâmetros da operação, e

   7. a interpretação dos parâmetros, em parênteses.

   A interpretação dos parâmetros reconhece nomes de variáveis locais
   e globais, valores de constantes, alvos de ramificações, e
   operadores de comparação.

   O resultado é escrito como texto no arquivo *file* caso tenha sido
   fornecido como argumento, ou para "sys.stdout" caso contrário.

   Alterado na versão 3.4: Adicionado o parâmetro *file*.

dis.get_instructions(x, *, first_line=None)

   Retorna um iterador sobre as instruções na função, método, string
   de código-fonte ou objeto de código fornecido.

   O iterador gera uma série de tuplas nomeadas "Instruction" contendo
   detalhes de cada operação no código fornecido.

   Se *first_line* não for "None", ele indica o número de linha que
   deve ser reportado para a primeira linha de código-fonte no código
   desmontado.  Caso contrário, a informação de linha de código-fonte
   (se houver) é extraída diretamente da desconstrução do objeto de
   código.

   Novo na versão 3.4.

dis.findlinestarts(code)

   This generator function uses the "co_firstlineno" and "co_lnotab"
   attributes of the code object *code* to find the offsets which are
   starts of lines in the source code.  They are generated as
   "(offset, lineno)" pairs. See Objects/lnotab_notes.txt for the
   "co_lnotab" format and how to decode it.

   Alterado na versão 3.6: Números de linhas podem ser decrescentes.
   Antes, eles eram sempre crescentes.

dis.findlabels(code)

   Detecta todas as posições na string de bytecode compilado bruto
   *code* que são alvos de pulos, e as retorna em uma lista.

dis.stack_effect(opcode, oparg=None, *, jump=None)

   Calcula o efeito que o *opcode* com argumento *oparg* tem na pilha.

   Se a operação tiver um alvo de pulo e *jump* for "True",
   "stack_effect()" vai retornar o efeito na pilha de realizar o pulo.
   Se *jump* for "False", ela vai retornar o efeito na pilha de não
   pular. E se *jump* for "None" (o padrão), vai retornar o efeito
   máximo na pilha dentre os dois casos.

   Novo na versão 3.4.

   Alterado na versão 3.8: Adicionado o parâmetro *jump*.


Instruções em bytecode do Python
================================

A função "get_instructions()" e a classe "Bytecode" fornecem detalhes
de instruções de bytecode como instâncias de "Instruction":

class dis.Instruction

   Detalhes de uma operação em bytecode

   opcode

      código numérico da operação, correspondendo aos valores dos
      opcodes listados abaixo e aos valores dos bytecodes nas Opcode
      collections.

   opname

      nome legível por humanos para a operação

   arg

      argumento numérico para a operação (se houver), caso contrário
      "None"

   argval

      resolved arg value (if known), otherwise same as arg

   argrepr

      human readable description of operation argument

   offset

      índice de início da operação dentro da sequência de bytecodes

   starts_line

      line started by this opcode (if any), otherwise "None"

   is_jump_target

      "True" se algum outro código pula para cá, senão "False"

   Novo na versão 3.4.

O compilador de Python atualmente gera as seguintes instruções de
bytecode.

**Instruções gerais**

NOP

   Do nothing code.  Used as a placeholder by the bytecode optimizer.

POP_TOP

   Removes the top-of-stack (TOS) item.

ROT_TWO

   Swaps the two top-most stack items.

ROT_THREE

   Lifts second and third stack item one position up, moves top down
   to position three.

ROT_FOUR

   Lifts second, third and fourth stack items one position up, moves
   top down to position four.

   Novo na versão 3.8.

DUP_TOP

   Duplicates the reference on top of the stack.

   Novo na versão 3.2.

DUP_TOP_TWO

   Duplicates the two references on top of the stack, leaving them in
   the same order.

   Novo na versão 3.2.

**Operações unárias**

Operações unárias tiram o topo da pilha, aplicam a operação, e põem o
resultado de volta na pilha.

UNARY_POSITIVE

   Implements "TOS = +TOS".

UNARY_NEGATIVE

   Implements "TOS = -TOS".

UNARY_NOT

   Implements "TOS = not TOS".

UNARY_INVERT

   Implementação "TOS = ~TOS".

GET_ITER

   Implementa "TOS = iter(TOS)".

GET_YIELD_FROM_ITER

   If "TOS" is a *generator iterator* or *coroutine* object it is left
   as is.  Otherwise, implements "TOS = iter(TOS)".

   Novo na versão 3.5.

**Operações Binárias**

Binary operations remove the top of the stack (TOS) and the second
top-most stack item (TOS1) from the stack.  They perform the
operation, and put the result back on the stack.

BINARY_POWER

   Implementa "TOS = TOS1 ** TOS".

BINARY_MULTIPLY

   Implements "TOS = TOS1 * TOS".

BINARY_MATRIX_MULTIPLY

   Implementado "TOS = TOS1 @ TOS".

   Novo na versão 3.5.

BINARY_FLOOR_DIVIDE

   Implementa "TOS = TOS1 // TOS".

BINARY_TRUE_DIVIDE

   Implementa "TOS = TOS1 / TOS".

BINARY_MODULO

   Implementa "TOS = TOS1 % TOS".

BINARY_ADD

   Implements "TOS = TOS1 + TOS".

BINARY_SUBTRACT

   Implements "TOS = TOS1 - TOS".

BINARY_SUBSCR

   Implements "TOS = TOS1[TOS]".

BINARY_LSHIFT

   Implements "TOS = TOS1 << TOS".

BINARY_RSHIFT

   Implements "TOS = TOS1 >> TOS".

BINARY_AND

   Implements "TOS = TOS1 & TOS".

BINARY_XOR

   Implements "TOS = TOS1 ^ TOS".

BINARY_OR

   Implements "TOS = TOS1 | TOS".

**In-place operations**

In-place operations are like binary operations, in that they remove
TOS and TOS1, and push the result back on the stack, but the operation
is done in-place when TOS1 supports it, and the resulting TOS may be
(but does not have to be) the original TOS1.

INPLACE_POWER

   Implements in-place "TOS = TOS1 ** TOS".

INPLACE_MULTIPLY

   Implements in-place "TOS = TOS1 * TOS".

INPLACE_MATRIX_MULTIPLY

   Implements in-place "TOS = TOS1 @ TOS".

   Novo na versão 3.5.

INPLACE_FLOOR_DIVIDE

   Implements in-place "TOS = TOS1 // TOS".

INPLACE_TRUE_DIVIDE

   Implements in-place "TOS = TOS1 / TOS".

INPLACE_MODULO

   Implements in-place "TOS = TOS1 % TOS".

INPLACE_ADD

   Implements in-place "TOS = TOS1 + TOS".

INPLACE_SUBTRACT

   Implements in-place "TOS = TOS1 - TOS".

INPLACE_LSHIFT

   Implements in-place "TOS = TOS1 << TOS".

INPLACE_RSHIFT

   Implements in-place "TOS = TOS1 >> TOS".

INPLACE_AND

   Implements in-place "TOS = TOS1 & TOS".

INPLACE_XOR

   Implements in-place "TOS = TOS1 ^ TOS".

INPLACE_OR

   Implements in-place "TOS = TOS1 | TOS".

STORE_SUBSCR

   Implements "TOS1[TOS] = TOS2".

DELETE_SUBSCR

   Implements "del TOS1[TOS]".

**Opcodes para corrotinas**

GET_AWAITABLE

   Implements "TOS = get_awaitable(TOS)", where "get_awaitable(o)"
   returns "o" if "o" is a coroutine object or a generator object with
   the CO_ITERABLE_COROUTINE flag, or resolves "o.__await__".

   Novo na versão 3.5.

GET_AITER

   Implements "TOS = TOS.__aiter__()".

   Novo na versão 3.5.

   Alterado na versão 3.7: Não é mais aceitado que o "__aiter__"
   retorne objetos aguardáveis.

GET_ANEXT

   Implements "PUSH(get_awaitable(TOS.__anext__()))".  See
   "GET_AWAITABLE" for details about "get_awaitable"

   Novo na versão 3.5.

END_ASYNC_FOR

   Terminates an "async for" loop.  Handles an exception raised when
   awaiting a next item.  If TOS is "StopAsyncIteration" pop 7 values
   from the stack and restore the exception state using the second
   three of them.  Otherwise re-raise the exception using the three
   values from the stack.  An exception handler block is removed from
   the block stack.

   Novo na versão 3.8.

BEFORE_ASYNC_WITH

   Resolves "__aenter__" and "__aexit__" from the object on top of the
   stack.  Pushes "__aexit__" and result of "__aenter__()" to the
   stack.

   Novo na versão 3.5.

SETUP_ASYNC_WITH

   Creates a new frame object.

   Novo na versão 3.5.

**Opcodes genéricos**

PRINT_EXPR

   Implements the expression statement for the interactive mode.  TOS
   is removed from the stack and printed.  In non-interactive mode, an
   expression statement is terminated with "POP_TOP".

SET_ADD(i)

   Calls "set.add(TOS1[-i], TOS)".  Used to implement set
   comprehensions.

LIST_APPEND(i)

   Calls "list.append(TOS1[-i], TOS)".  Used to implement list
   comprehensions.

MAP_ADD(i)

   Calls "dict.__setitem__(TOS1[-i], TOS1, TOS)".  Used to implement
   dict comprehensions.

   Novo na versão 3.1.

   Alterado na versão 3.8: Map value is TOS and map key is TOS1.
   Before, those were reversed.

Para as instruções "SET_ADD", "LIST_APPEND" e "MAP_ADD", o valor ou
par chave/valor é removido da pilha, mas o objeto de contêiner
continua na pilha para que ele esteja disponível para as iterações
seguintes do laço.

RETURN_VALUE

   Returns with TOS to the caller of the function.

YIELD_VALUE

   Pops TOS and yields it from a *generator*.

YIELD_FROM

   Pops TOS and delegates to it as a subiterator from a *generator*.

   Novo na versão 3.3.

SETUP_ANNOTATIONS

   Verifica se "__annotations__" está definido em "locals()" e, se não
   estiver, é inicializado como um "dict" vazio. Este opcode é emitido
   somente se o corpo de uma classe ou módulo contém *anotações de
   variáveis* estaticamente.

   Novo na versão 3.6.

IMPORT_STAR

   Loads all symbols not starting with "'_'" directly from the module
   TOS to the local namespace. The module is popped after loading all
   names. This opcode implements "from module import *".

POP_BLOCK

   Removes one block from the block stack.  Per frame, there is a
   stack of blocks, denoting "try" statements, and such.

POP_EXCEPT

   Removes one block from the block stack. The popped block must be an
   exception handler block, as implicitly created when entering an
   except handler.  In addition to popping extraneous values from the
   frame stack, the last three popped values are used to restore the
   exception state.

POP_FINALLY(preserve_tos)

   Cleans up the value stack and the block stack.  If *preserve_tos*
   is not "0" TOS first is popped from the stack and pushed on the
   stack after performing other stack operations:

   * If TOS is "NULL" or an integer (pushed by "BEGIN_FINALLY" or
     "CALL_FINALLY") it is popped from the stack.

   * If TOS is an exception type (pushed when an exception has been
     raised) 6 values are popped from the stack, the last three popped
     values are used to restore the exception state.  An exception
     handler block is removed from the block stack.

   It is similar to "END_FINALLY", but doesn't change the bytecode
   counter nor raise an exception.  Used for implementing "break",
   "continue" and "return" in the "finally" block.

   Novo na versão 3.8.

BEGIN_FINALLY

   Pushes "NULL" onto the stack for using it in "END_FINALLY",
   "POP_FINALLY", "WITH_CLEANUP_START" and "WITH_CLEANUP_FINISH".
   Starts the "finally" block.

   Novo na versão 3.8.

END_FINALLY

   Terminates a "finally" clause.  The interpreter recalls whether the
   exception has to be re-raised or execution has to be continued
   depending on the value of TOS.

   * If TOS is "NULL" (pushed by "BEGIN_FINALLY") continue from the
     next instruction. TOS is popped.

   * If TOS is an integer (pushed by "CALL_FINALLY"), sets the
     bytecode counter to TOS.  TOS is popped.

   * If TOS is an exception type (pushed when an exception has been
     raised) 6 values are popped from the stack, the first three
     popped values are used to re-raise the exception and the last
     three popped values are used to restore the exception state.  An
     exception handler block is removed from the block stack.

LOAD_BUILD_CLASS

   Pushes "builtins.__build_class__()" onto the stack.  It is later
   called by "CALL_FUNCTION" to construct a class.

SETUP_WITH(delta)

   This opcode performs several operations before a with block starts.
   First, it loads "__exit__()" from the context manager and pushes it
   onto the stack for later use by "WITH_CLEANUP_START".  Then,
   "__enter__()" is called, and a finally block pointing to *delta* is
   pushed.  Finally, the result of calling the "__enter__()" method is
   pushed onto the stack.  The next opcode will either ignore it
   ("POP_TOP"), or store it in (a) variable(s) ("STORE_FAST",
   "STORE_NAME", or "UNPACK_SEQUENCE").

   Novo na versão 3.2.

WITH_CLEANUP_START

   Starts cleaning up the stack when a "with" statement block exits.

   At the top of the stack are either "NULL" (pushed by
   "BEGIN_FINALLY") or 6 values pushed if an exception has been raised
   in the with block.  Below is the context manager's "__exit__()" or
   "__aexit__()" bound method.

   If TOS is "NULL", calls "SECOND(None, None, None)", removes the
   function from the stack, leaving TOS, and pushes "None" to the
   stack.  Otherwise calls "SEVENTH(TOP, SECOND, THIRD)", shifts the
   bottom 3 values of the stack down, replaces the empty spot with
   "NULL" and pushes TOS.  Finally pushes the result of the call.

WITH_CLEANUP_FINISH

   Finishes cleaning up the stack when a "with" statement block exits.

   TOS is result of "__exit__()" or "__aexit__()" function call pushed
   by "WITH_CLEANUP_START".  SECOND is "None" or an exception type
   (pushed when an exception has been raised).

   Pops two values from the stack.  If SECOND is not None and TOS is
   true unwinds the EXCEPT_HANDLER block which was created when the
   exception was caught and pushes "NULL" to the stack.

All of the following opcodes use their arguments.

STORE_NAME(namei)

   Implements "name = TOS". *namei* is the index of *name* in the
   attribute "co_names" of the code object. The compiler tries to use
   "STORE_FAST" or "STORE_GLOBAL" if possible.

DELETE_NAME(namei)

   Implements "del name", where *namei* is the index into "co_names"
   attribute of the code object.

UNPACK_SEQUENCE(count)

   Unpacks TOS into *count* individual values, which are put onto the
   stack right-to-left.

UNPACK_EX(counts)

   Implements assignment with a starred target: Unpacks an iterable in
   TOS into individual values, where the total number of values can be
   smaller than the number of items in the iterable: one of the new
   values will be a list of all leftover items.

   The low byte of *counts* is the number of values before the list
   value, the high byte of *counts* the number of values after it.
   The resulting values are put onto the stack right-to-left.

STORE_ATTR(namei)

   Implements "TOS.name = TOS1", where *namei* is the index of name in
   "co_names".

DELETE_ATTR(namei)

   Implements "del TOS.name", using *namei* as index into "co_names".

STORE_GLOBAL(namei)

   Funciona como o "STORE_NAME", mas o nome é armazenado com um nome
   global.

DELETE_GLOBAL(namei)

   Funciona como o "DELETE_NAME", mas deleta um nome global.

LOAD_CONST(consti)

   Põe "co_consts[consti]" no topo da pilha.

LOAD_NAME(namei)

   Pushes the value associated with "co_names[namei]" onto the stack.

BUILD_TUPLE(count)

   Creates a tuple consuming *count* items from the stack, and pushes
   the resulting tuple onto the stack.

BUILD_LIST(count)

   Works as "BUILD_TUPLE", but creates a list.

BUILD_SET(count)

   Works as "BUILD_TUPLE", but creates a set.

BUILD_MAP(count)

   Pushes a new dictionary object onto the stack.  Pops "2 * count"
   items so that the dictionary holds *count* entries: "{..., TOS3:
   TOS2, TOS1: TOS}".

   Alterado na versão 3.5: The dictionary is created from stack items
   instead of creating an empty dictionary pre-sized to hold *count*
   items.

BUILD_CONST_KEY_MAP(count)

   The version of "BUILD_MAP" specialized for constant keys. Pops the
   top element on the stack which contains a tuple of keys, then
   starting from "TOS1", pops *count* values to form values in the
   built dictionary.

   Novo na versão 3.6.

BUILD_STRING(count)

   Concatenates *count* strings from the stack and pushes the
   resulting string onto the stack.

   Novo na versão 3.6.

BUILD_TUPLE_UNPACK(count)

   Pops *count* iterables from the stack, joins them in a single
   tuple, and pushes the result.  Implements iterable unpacking in
   tuple displays "(*x, *y, *z)".

   Novo na versão 3.5.

BUILD_TUPLE_UNPACK_WITH_CALL(count)

   This is similar to "BUILD_TUPLE_UNPACK", but is used for "f(*x, *y,
   *z)" call syntax. The stack item at position "count + 1" should be
   the corresponding callable "f".

   Novo na versão 3.6.

BUILD_LIST_UNPACK(count)

   This is similar to "BUILD_TUPLE_UNPACK", but pushes a list instead
   of tuple.  Implements iterable unpacking in list displays "[*x, *y,
   *z]".

   Novo na versão 3.5.

BUILD_SET_UNPACK(count)

   This is similar to "BUILD_TUPLE_UNPACK", but pushes a set instead
   of tuple.  Implements iterable unpacking in set displays "{*x, *y,
   *z}".

   Novo na versão 3.5.

BUILD_MAP_UNPACK(count)

   Pops *count* mappings from the stack, merges them into a single
   dictionary, and pushes the result.  Implements dictionary unpacking
   in dictionary displays "{**x, **y, **z}".

   Novo na versão 3.5.

BUILD_MAP_UNPACK_WITH_CALL(count)

   This is similar to "BUILD_MAP_UNPACK", but is used for "f(**x, **y,
   **z)" call syntax.  The stack item at position "count + 2" should
   be the corresponding callable "f".

   Novo na versão 3.5.

   Alterado na versão 3.6: The position of the callable is determined
   by adding 2 to the opcode argument instead of encoding it in the
   second byte of the argument.

LOAD_ATTR(namei)

   Replaces TOS with "getattr(TOS, co_names[namei])".

COMPARE_OP(opname)

   Performs a Boolean operation.  The operation name can be found in
   "cmp_op[opname]".

IMPORT_NAME(namei)

   Imports the module "co_names[namei]".  TOS and TOS1 are popped and
   provide the *fromlist* and *level* arguments of "__import__()".
   The module object is pushed onto the stack.  The current namespace
   is not affected: for a proper import statement, a subsequent
   "STORE_FAST" instruction modifies the namespace.

IMPORT_FROM(namei)

   Loads the attribute "co_names[namei]" from the module found in TOS.
   The resulting object is pushed onto the stack, to be subsequently
   stored by a "STORE_FAST" instruction.

JUMP_FORWARD(delta)

   Increments bytecode counter by *delta*.

POP_JUMP_IF_TRUE(target)

   If TOS is true, sets the bytecode counter to *target*.  TOS is
   popped.

   Novo na versão 3.1.

POP_JUMP_IF_FALSE(target)

   If TOS is false, sets the bytecode counter to *target*.  TOS is
   popped.

   Novo na versão 3.1.

JUMP_IF_TRUE_OR_POP(target)

   If TOS is true, sets the bytecode counter to *target* and leaves
   TOS on the stack.  Otherwise (TOS is false), TOS is popped.

   Novo na versão 3.1.

JUMP_IF_FALSE_OR_POP(target)

   If TOS is false, sets the bytecode counter to *target* and leaves
   TOS on the stack.  Otherwise (TOS is true), TOS is popped.

   Novo na versão 3.1.

JUMP_ABSOLUTE(target)

   Set bytecode counter to *target*.

FOR_ITER(delta)

   TOS is an *iterator*.  Call its "__next__()" method.  If this
   yields a new value, push it on the stack (leaving the iterator
   below it).  If the iterator indicates it is exhausted TOS is
   popped, and the byte code counter is incremented by *delta*.

LOAD_GLOBAL(namei)

   Loads the global named "co_names[namei]" onto the stack.

SETUP_FINALLY(delta)

   Pushes a try block from a try-finally or try-except clause onto the
   block stack.  *delta* points to the finally block or the first
   except block.

CALL_FINALLY(delta)

   Pushes the address of the next instruction onto the stack and
   increments bytecode counter by *delta*.  Used for calling the
   finally block as a "subroutine".

   Novo na versão 3.8.

LOAD_FAST(var_num)

   Pushes a reference to the local "co_varnames[var_num]" onto the
   stack.

STORE_FAST(var_num)

   Stores TOS into the local "co_varnames[var_num]".

DELETE_FAST(var_num)

   Deletes local "co_varnames[var_num]".

LOAD_CLOSURE(i)

   Pushes a reference to the cell contained in slot *i* of the cell
   and free variable storage.  The name of the variable is
   "co_cellvars[i]" if *i* is less than the length of *co_cellvars*.
   Otherwise it is "co_freevars[i - len(co_cellvars)]".

LOAD_DEREF(i)

   Loads the cell contained in slot *i* of the cell and free variable
   storage. Pushes a reference to the object the cell contains on the
   stack.

LOAD_CLASSDEREF(i)

   Much like "LOAD_DEREF" but first checks the locals dictionary
   before consulting the cell.  This is used for loading free
   variables in class bodies.

   Novo na versão 3.4.

STORE_DEREF(i)

   Stores TOS into the cell contained in slot *i* of the cell and free
   variable storage.

DELETE_DEREF(i)

   Empties the cell contained in slot *i* of the cell and free
   variable storage. Used by the "del" statement.

   Novo na versão 3.2.

RAISE_VARARGS(argc)

   Raises an exception using one of the 3 forms of the "raise"
   statement, depending on the value of *argc*:

   * 0: "raise" (re-raise previous exception)

   * 1: "raise TOS" (raise exception instance or type at "TOS")

   * 2: "raise TOS1 from TOS" (raise exception instance or type at
     "TOS1" with "__cause__" set to "TOS")

CALL_FUNCTION(argc)

   Calls a callable object with positional arguments. *argc* indicates
   the number of positional arguments. The top of the stack contains
   positional arguments, with the right-most argument on top.  Below
   the arguments is a callable object to call. "CALL_FUNCTION" pops
   all arguments and the callable object off the stack, calls the
   callable object with those arguments, and pushes the return value
   returned by the callable object.

   Alterado na versão 3.6: This opcode is used only for calls with
   positional arguments.

CALL_FUNCTION_KW(argc)

   Calls a callable object with positional (if any) and keyword
   arguments. *argc* indicates the total number of positional and
   keyword arguments. The top element on the stack contains a tuple of
   keyword argument names. Below that are keyword arguments in the
   order corresponding to the tuple. Below that are positional
   arguments, with the right-most parameter on top.  Below the
   arguments is a callable object to call. "CALL_FUNCTION_KW" pops all
   arguments and the callable object off the stack, calls the callable
   object with those arguments, and pushes the return value returned
   by the callable object.

   Alterado na versão 3.6: Keyword arguments are packed in a tuple
   instead of a dictionary, *argc* indicates the total number of
   arguments.

CALL_FUNCTION_EX(flags)

   Calls a callable object with variable set of positional and keyword
   arguments.  If the lowest bit of *flags* is set, the top of the
   stack contains a mapping object containing additional keyword
   arguments. Below that is an iterable object containing positional
   arguments and a callable object to call.
   "BUILD_MAP_UNPACK_WITH_CALL" and "BUILD_TUPLE_UNPACK_WITH_CALL" can
   be used for merging multiple mapping objects and iterables
   containing arguments. Before the callable is called, the mapping
   object and iterable object are each "unpacked" and their contents
   passed in as keyword and positional arguments respectively.
   "CALL_FUNCTION_EX" pops all arguments and the callable object off
   the stack, calls the callable object with those arguments, and
   pushes the return value returned by the callable object.

   Novo na versão 3.6.

LOAD_METHOD(namei)

   Loads a method named "co_names[namei]" from the TOS object. TOS is
   popped. This bytecode distinguishes two cases: if TOS has a method
   with the correct name, the bytecode pushes the unbound method and
   TOS. TOS will be used as the first argument ("self") by
   "CALL_METHOD" when calling the unbound method. Otherwise, "NULL"
   and the object return by the attribute lookup are pushed.

   Novo na versão 3.7.

CALL_METHOD(argc)

   Calls a method.  *argc* is the number of positional arguments.
   Keyword arguments are not supported.  This opcode is designed to be
   used with "LOAD_METHOD".  Positional arguments are on top of the
   stack. Below them, the two items described in "LOAD_METHOD" are on
   the stack (either "self" and an unbound method object or "NULL" and
   an arbitrary callable). All of them are popped and the return value
   is pushed.

   Novo na versão 3.7.

MAKE_FUNCTION(flags)

   Pushes a new function object on the stack.  From bottom to top, the
   consumed stack must consist of values if the argument carries a
   specified flag value

   * "0x01" a tuple of default values for positional-only and
     positional-or-keyword parameters in positional order

   * "0x02" a dictionary of keyword-only parameters' default values

   * "0x04" an annotation dictionary

   * "0x08" a tuple containing cells for free variables, making a
     closure

   * the code associated with the function (at TOS1)

   * the *qualified name* of the function (at TOS)

BUILD_SLICE(argc)

   Pushes a slice object on the stack.  *argc* must be 2 or 3.  If it
   is 2, "slice(TOS1, TOS)" is pushed; if it is 3, "slice(TOS2, TOS1,
   TOS)" is pushed. See the "slice()" built-in function for more
   information.

EXTENDED_ARG(ext)

   Prefixes any opcode which has an argument too big to fit into the
   default one byte. *ext* holds an additional byte which act as
   higher bits in the argument. For each opcode, at most three
   prefixal "EXTENDED_ARG" are allowed, forming an argument from two-
   byte to four-byte.

FORMAT_VALUE(flags)

   Used for implementing formatted literal strings (f-strings).  Pops
   an optional *fmt_spec* from the stack, then a required *value*.
   *flags* is interpreted as follows:

   * "(flags & 0x03) == 0x00": *value* is formatted as-is.

   * "(flags & 0x03) == 0x01": call "str()" on *value* before
     formatting it.

   * "(flags & 0x03) == 0x02": call "repr()" on *value* before
     formatting it.

   * "(flags & 0x03) == 0x03": call "ascii()" on *value* before
     formatting it.

   * "(flags & 0x04) == 0x04": pop *fmt_spec* from the stack and use
     it, else use an empty *fmt_spec*.

   Formatting is performed using "PyObject_Format()".  The result is
   pushed on the stack.

   Novo na versão 3.6.

HAVE_ARGUMENT

   This is not really an opcode.  It identifies the dividing line
   between opcodes which don't use their argument and those that do
   ("< HAVE_ARGUMENT" and ">= HAVE_ARGUMENT", respectively).

   Alterado na versão 3.6: Now every instruction has an argument, but
   opcodes "< HAVE_ARGUMENT" ignore it. Before, only opcodes ">=
   HAVE_ARGUMENT" had an argument.


Opcode collections
==================

These collections are provided for automatic introspection of bytecode
instructions:

dis.opname

   Sequence of operation names, indexable using the bytecode.

dis.opmap

   Dictionary mapping operation names to bytecodes.

dis.cmp_op

   Sequence of all compare operation names.

dis.hasconst

   Sequence of bytecodes that access a constant.

dis.hasfree

   Sequence of bytecodes that access a free variable (note that 'free'
   in this context refers to names in the current scope that are
   referenced by inner scopes or names in outer scopes that are
   referenced from this scope.  It does *not* include references to
   global or builtin scopes).

dis.hasname

   Sequence of bytecodes that access an attribute by name.

dis.hasjrel

   Sequence of bytecodes that have a relative jump target.

dis.hasjabs

   Sequence of bytecodes that have an absolute jump target.

dis.haslocal

   Sequence of bytecodes that access a local variable.

dis.hascompare

   Sequence of bytecodes of Boolean operations.
