11.4. stat — Interpreting stat() results

Código Fonte: Lib/stat.py

O módulo stat define constantes e funções para interpretar os resultados de os.stat(), os.fstat() e os.lstat() (se existirem). Para detalhes completos sobre chamadas stat(), fstat() e lstat(), consulte a documentação do seu sistema.

Alterado na versão 3.4: The stat module is backed by a C implementation.

The stat module defines the following functions to test for specific file types:

stat.S_ISDIR(mode)

Return non-zero if the mode is from a directory.

stat.S_ISCHR(mode)

Return non-zero if the mode is from a character special device file.

stat.S_ISBLK(mode)

Return non-zero if the mode is from a block special device file.

stat.S_ISREG(mode)

Return non-zero if the mode is from a regular file.

stat.S_ISFIFO(mode)

Return non-zero if the mode is from a FIFO (named pipe).

stat.S_ISLNK(mode)

Return non-zero if the mode is from a symbolic link.

stat.S_ISSOCK(mode)

Return non-zero if the mode is from a socket.

stat.S_ISDOOR(mode)

Return non-zero if the mode is from a door.

Novo na versão 3.4.

stat.S_ISPORT(mode)

Return non-zero if the mode is from an event port.

Novo na versão 3.4.

stat.S_ISWHT(mode)

Return non-zero if the mode is from a whiteout.

Novo na versão 3.4.

Two additional functions are defined for more general manipulation of the file’s mode:

stat.S_IMODE(mode)

Return the portion of the file’s mode that can be set by os.chmod()—that is, the file’s permission bits, plus the sticky bit, set-group-id, and set-user-id bits (on systems that support them).

stat.S_IFMT(mode)

Return the portion of the file’s mode that describes the file type (used by the S_IS*() functions above).

Normally, you would use the os.path.is*() functions for testing the type of a file; the functions here are useful when you are doing multiple tests of the same file and wish to avoid the overhead of the stat() system call for each test. These are also useful when checking for information about a file that isn’t handled by os.path, like the tests for block and character devices.

Exemplo:

import os, sys
from stat import *

def walktree(top, callback):
    '''recursively descend the directory tree rooted at top,
       calling the callback function for each regular file'''

    for f in os.listdir(top):
        pathname = os.path.join(top, f)
        mode = os.stat(pathname).st_mode
        if S_ISDIR(mode):
            # It's a directory, recurse into it
            walktree(pathname, callback)
        elif S_ISREG(mode):
            # It's a file, call the callback function
            callback(pathname)
        else:
            # Unknown file type, print a message
            print('Skipping %s' % pathname)

def visitfile(file):
    print('visiting', file)

if __name__ == '__main__':
    walktree(sys.argv[1], visitfile)

An additional utility function is provided to convert a file’s mode in a human readable string:

stat.filemode(mode)

Convert a file’s mode to a string of the form ‘-rwxrwxrwx’.

Novo na versão 3.3.

Alterado na versão 3.4: The function supports S_IFDOOR, S_IFPORT and S_IFWHT.

All the variables below are simply symbolic indexes into the 10-tuple returned by os.stat(), os.fstat() or os.lstat().

stat.ST_MODE

Inode protection mode.

stat.ST_INO

Inode number.

stat.ST_DEV

Device inode resides on.

Number of links to the inode.

stat.ST_UID

User id of the owner.

stat.ST_GID

Group id of the owner.

stat.ST_SIZE

Size in bytes of a plain file; amount of data waiting on some special files.

stat.ST_ATIME

Time of last access.

stat.ST_MTIME

Time of last modification.

stat.ST_CTIME

The “ctime” as reported by the operating system. On some systems (like Unix) is the time of the last metadata change, and, on others (like Windows), is the creation time (see platform documentation for details).

The interpretation of “file size” changes according to the file type. For plain files this is the size of the file in bytes. For FIFOs and sockets under most flavors of Unix (including Linux in particular), the “size” is the number of bytes waiting to be read at the time of the call to os.stat(), os.fstat(), or os.lstat(); this can sometimes be useful, especially for polling one of these special files after a non-blocking open. The meaning of the size field for other character and block devices varies more, depending on the implementation of the underlying system call.

The variables below define the flags used in the ST_MODE field.

Use of the functions above is more portable than use of the first set of flags:

stat.S_IFSOCK

Socket.

stat.S_IFLNK

Symbolic link.

stat.S_IFREG

Regular file.

stat.S_IFBLK

Block device.

stat.S_IFDIR

Directory.

stat.S_IFCHR

Character device.

stat.S_IFIFO

FIFO.

stat.S_IFDOOR

Door.

Novo na versão 3.4.

stat.S_IFPORT

Event port.

Novo na versão 3.4.

stat.S_IFWHT

Whiteout.

Novo na versão 3.4.

Nota

S_IFDOOR, S_IFPORT or S_IFWHT are defined as 0 when the platform does not have support for the file types.

The following flags can also be used in the mode argument of os.chmod():

stat.S_ISUID

Set UID bit.

stat.S_ISGID

Set-group-ID bit. This bit has several special uses. For a directory it indicates that BSD semantics is to be used for that directory: files created there inherit their group ID from the directory, not from the effective group ID of the creating process, and directories created there will also get the S_ISGID bit set. For a file that does not have the group execution bit (S_IXGRP) set, the set-group-ID bit indicates mandatory file/record locking (see also S_ENFMT).

stat.S_ISVTX

Sticky bit. When this bit is set on a directory it means that a file in that directory can be renamed or deleted only by the owner of the file, by the owner of the directory, or by a privileged process.

stat.S_IRWXU

Mask for file owner permissions.

stat.S_IRUSR

Owner has read permission.

stat.S_IWUSR

Owner has write permission.

stat.S_IXUSR

Owner has execute permission.

stat.S_IRWXG

Mask for group permissions.

stat.S_IRGRP

Group has read permission.

stat.S_IWGRP

Group has write permission.

stat.S_IXGRP

Grupo tem permissão de execução.

stat.S_IRWXO

Mask for permissions for others (not in group).

stat.S_IROTH

Others have read permission.

stat.S_IWOTH

Others have write permission.

stat.S_IXOTH

Others have execute permission.

stat.S_ENFMT

System V file locking enforcement. This flag is shared with S_ISGID: file/record locking is enforced on files that do not have the group execution bit (S_IXGRP) set.

stat.S_IREAD

Unix V7 synonym for S_IRUSR.

stat.S_IWRITE

Unix V7 synonym for S_IWUSR.

stat.S_IEXEC

Unix V7 synonym for S_IXUSR.

The following flags can be used in the flags argument of os.chflags():

stat.UF_NODUMP

Do not dump the file.

stat.UF_IMMUTABLE

The file may not be changed.

stat.UF_APPEND

The file may only be appended to.

stat.UF_OPAQUE

The directory is opaque when viewed through a union stack.

The file may not be renamed or deleted.

stat.UF_COMPRESSED

The file is stored compressed (Mac OS X 10.6+).

stat.UF_HIDDEN

The file should not be displayed in a GUI (Mac OS X 10.5+).

stat.SF_ARCHIVED

The file may be archived.

stat.SF_IMMUTABLE

The file may not be changed.

stat.SF_APPEND

The file may only be appended to.

The file may not be renamed or deleted.

stat.SF_SNAPSHOT

The file is a snapshot file.

See the *BSD or Mac OS systems man page chflags(2) for more information.

On Windows, the following file attribute constants are available for use when testing bits in the st_file_attributes member returned by os.stat(). See the Windows API documentation for more detail on the meaning of these constants.

stat.FILE_ATTRIBUTE_ARCHIVE
stat.FILE_ATTRIBUTE_COMPRESSED
stat.FILE_ATTRIBUTE_DEVICE
stat.FILE_ATTRIBUTE_DIRECTORY
stat.FILE_ATTRIBUTE_ENCRYPTED
stat.FILE_ATTRIBUTE_HIDDEN
stat.FILE_ATTRIBUTE_INTEGRITY_STREAM
stat.FILE_ATTRIBUTE_NORMAL
stat.FILE_ATTRIBUTE_NOT_CONTENT_INDEXED
stat.FILE_ATTRIBUTE_NO_SCRUB_DATA
stat.FILE_ATTRIBUTE_OFFLINE
stat.FILE_ATTRIBUTE_READONLY
stat.FILE_ATTRIBUTE_REPARSE_POINT
stat.FILE_ATTRIBUTE_SPARSE_FILE
stat.FILE_ATTRIBUTE_SYSTEM
stat.FILE_ATTRIBUTE_TEMPORARY
stat.FILE_ATTRIBUTE_VIRTUAL

Novo na versão 3.5.