10. Referência da API¶

10.1. `distutils.core` — funcionalidade principal Distutils¶

O módulo distutils.core é o único módulo que necessita ser instalado para usar Distutils. Provê a função setup() (que é chamada do script setup). Indiretamente provê as classes distutils.dist.Distribution e distutils.cmd.Command.

distutils.core.setup(arguments)¶

A função faz-tudo básica, que faz quase tudo que você poderia querer de um método Distutils.

A função setup recebe um grande número de argumentos. São apresentados na tabela a seguir.

argumento name	value	tipo
name	O nome do pacote	uma string
version	O número da versão do pacote; veja `distutils.version`	uma string
description	Um resumo descrevendo o pacote	uma string
long_description	Descrição mais longa do pacote	uma string
author	O nome do autor do pacote	uma string
author_email	O endereço de e-mail do autor do pacote	uma string
maintainer	O nome do mantenedor atual, se for diferente do autor. Observe que s o mantenedor for fornecido, distutils vai usá-lo como autor, no arquivo `PKG-INFO`	uma string
maintainer_email	O endereço de e-mail do mantenedor atual, se diferente do autor	uma string
url	Uma URL para o pacote (homepage)	uma string
download_url	Uma URL para baixar o pacote	uma string
packages	Uma lista de pacotes Python que distutils vai manipular	uma lista de strings
py_modules	Uma lista de módulos Python que distutils vai manipular	uma lista de strings
scripts	Uma lista de arquivos script que serão construídos e instalados	uma lista de strings
ext_modules	Uma lista de extensões Python que serão construídas	uma lista de instâncias da classe `distutils.core.Extension`
classifiers	Uma lista de categorias para o pacote	uma lista de strings; classificadores válidos são listados no PyPI.
distclass	a classe `Distribution` a ser usada	uma subclasse de `distutils.core.Distribution`
script_name	O nome do script setup.py - padrão é `sys.argv[0]`	uma string
script_args	Argumentos fornecidos ao script setup	uma lista de strings
options	opções padrão para o script setup	um dicionário
license	A licença para o pacote	uma string
keywords	Metadados descritivos, veja PEP 314	uma lista de strings ou strings separadas por vírgula
platforms		uma lista de strings ou strings separadas por vírgula
cmdclass	Um mapeamento de nomes de comando para subclasses `Command`	um dicionário
data_files	Uma lista de arquivos de dados para instalar	uma lista
package_dir	Um mapeamento do pacote para nomes de diretórios	um dicionário

distutils.core.run_setup(script_name[, script_args=None, stop_after='run'])¶

Run a setup script in a somewhat controlled environment, and return the distutils.dist.Distribution instance that drives things. This is useful if you need to find out the distribution meta-data (passed as keyword args from script to setup()), or the contents of the config files or command-line.

script_name is a file that will be read and run with exec(). sys.argv[0] will be replaced with script for the duration of the call. script_args is a list of strings; if supplied, sys.argv[1:] will be replaced by script_args for the duration of the call.

stop_after tells setup() when to stop processing; possible values:

value	description
init	Stop after the `Distribution` instance has been created and populated with the keyword arguments to `setup()`
config	Stop after config files have been parsed (and their data stored in the `Distribution` instance)
commandline	Stop after the command-line (`sys.argv[1:]` or script_args) have been parsed (and the data stored in the `Distribution` instance.)
run	Stop after all commands have been run (the same as if `setup()` had been called in the usual way). This is the default value.

In addition, the distutils.core module exposed a number of classes that live elsewhere.

Extension from distutils.extension
Command de distutils.cmd
Distribution from distutils.dist

A short description of each of these follows, but see the relevant module for the full reference.

class distutils.core.Extension¶

The Extension class describes a single C or C++ extension module in a setup script. It accepts the following keyword arguments in its constructor:

argumento name	value	tipo
name	the full name of the extension, including any packages — ie. not a filename or pathname, but Python dotted name	uma string
sources	list of source filenames, relative to the distribution root (where the setup script lives), in Unix form (slash-separated) for portability. Source files may be C, C++, SWIG (.i), platform-specific resource files, or whatever else is recognized by the build_ext command as source for a Python extension.	uma lista de strings
include_dirs	list of directories to search for C/C++ header files (in Unix form for portability)	uma lista de strings
define_macros	list of macros to define; each macro is defined using a 2-tuple `(name, value)`, where value is either the string to define it to or `None` to define it without a particular value (equivalent of `#define FOO` in source or `-DFOO` on Unix C compiler command line)	a list of tuples
undef_macros	list of macros to undefine explicitly	uma lista de strings
library_dirs	list of directories to search for C/C++ libraries at link time	uma lista de strings
libraries	list of library names (not filenames or paths) to link against	uma lista de strings
runtime_library_dirs	list of directories to search for C/C++ libraries at run time (for shared extensions, this is when the extension is loaded)	uma lista de strings
extra_objects	list of extra files to link with (eg. object files not implied by ‘sources’, static library that must be explicitly specified, binary resource files, etc.)	uma lista de strings
extra_compile_args	any extra platform- and compiler-specific information to use when compiling the source files in ‘sources’. For platforms and compilers where a command line makes sense, this is typically a list of command-line arguments, but for other platforms it could be anything.	uma lista de strings
extra_link_args	any extra platform- and compiler-specific information to use when linking object files together to create the extension (or to create a new static Python interpreter). Similar interpretation as for ‘extra_compile_args’.	uma lista de strings
export_symbols	list of symbols to be exported from a shared extension. Not used on all platforms, and not generally necessary for Python extensions, which typically export exactly one symbol: `init` + extension_name.	uma lista de strings
depends	list of files that the extension depends on	uma lista de strings
language	extension language (i.e. `'c'`, `'c++'`, `'objc'`). Will be detected from the source extensions if not provided.	uma string
optional	specifies that a build failure in the extension should not abort the build process, but simply skip the extension.	a boolean

class distutils.core.Distribution¶

A Distribution describes how to build, install and package up a Python software package.

See the setup() function for a list of keyword arguments accepted by the Distribution constructor. setup() creates a Distribution instance.

class distutils.core.Command¶: A Command class (or rather, an instance of one of its subclasses) implement a single distutils command.

10.2. `distutils.ccompiler` — CCompiler base class¶

This module provides the abstract base class for the CCompiler classes. A CCompiler instance can be used for all the compile and link steps needed to build a single project. Methods are provided to set options for the compiler — macro definitions, include directories, link path, libraries and the like.

This module provides the following functions.

distutils.ccompiler.gen_lib_options(compiler, library_dirs, runtime_library_dirs, libraries)¶: Generate linker options for searching library directories and linking with specific libraries. libraries and library_dirs are, respectively, lists of library names (not filenames!) and search directories. Returns a list of command-line options suitable for use with some compiler (depending on the two format strings passed in).

distutils.ccompiler.gen_preprocess_options(macros, include_dirs)¶: Generate C pre-processor options (-D, -U, -I) as used by at least two types of compilers: the typical Unix compiler and Visual C++. macros is the usual thing, a list of 1- or 2-tuples, where (name,) means undefine (-U) macro name, and (name, value) means define (-D) macro name to value. include_dirs is just a list of directory names to be added to the header file search path (-I). Returns a list of command-line options suitable for either Unix compilers or Visual C++.

distutils.ccompiler.get_default_compiler(osname, platform)¶

Determine the default compiler to use for the given platform.

osname should be one of the standard Python OS names (i.e. the ones returned by os.name) and platform the common value returned by sys.platform for the platform in question.

The default values are os.name and sys.platform in case the parameters are not given.

distutils.ccompiler.new_compiler(plat=None, compiler=None, verbose=0, dry_run=0, force=0)¶: Factory function to generate an instance of some CCompiler subclass for the supplied platform/compiler combination. plat defaults to os.name (eg. 'posix', 'nt'), and compiler defaults to the default compiler for that platform. Currently only 'posix' and 'nt' are supported, and the default compilers are “traditional Unix interface” (UnixCCompiler class) and Visual C++ (MSVCCompiler class). Note that it’s perfectly possible to ask for a Unix compiler object under Windows, and a Microsoft compiler object under Unix—if you supply a value for compiler, plat is ignored.

distutils.ccompiler.show_compilers()¶: Print list of available compilers (used by the --help-compiler options to build, build_ext, build_clib).

class distutils.ccompiler.CCompiler([verbose=0, dry_run=0, force=0])¶

The abstract base class CCompiler defines the interface that must be implemented by real compiler classes. The class also has some utility methods used by several compiler classes.

The basic idea behind a compiler abstraction class is that each instance can be used for all the compile/link steps in building a single project. Thus, attributes common to all of those compile and link steps — include directories, macros to define, libraries to link against, etc. — are attributes of the compiler instance. To allow for variability in how individual files are treated, most of those attributes may be varied on a per-compilation or per-link basis.

The constructor for each subclass creates an instance of the Compiler object. Flags are verbose (show verbose output), dry_run (don’t actually execute the steps) and force (rebuild everything, regardless of dependencies). All of these flags default to 0 (off). Note that you probably don’t want to instantiate CCompiler or one of its subclasses directly - use the distutils.CCompiler.new_compiler() factory function instead.

The following methods allow you to manually alter compiler options for the instance of the Compiler class.

add_include_dir(dir)¶: Add dir to the list of directories that will be searched for header files. The compiler is instructed to search directories in the order in which they are supplied by successive calls to add_include_dir().

set_include_dirs(dirs)¶: Set the list of directories that will be searched to dirs (a list of strings). Overrides any preceding calls to add_include_dir(); subsequent calls to add_include_dir() add to the list passed to set_include_dirs(). This does not affect any list of standard include directories that the compiler may search by default.

add_library(libname)¶

Add libname to the list of libraries that will be included in all links driven by this compiler object. Note that libname should *not* be the name of a file containing a library, but the name of the library itself: the actual filename will be inferred by the linker, the compiler, or the compiler class (depending on the platform).

The linker will be instructed to link against libraries in the order they were supplied to add_library() and/or set_libraries(). It is perfectly valid to duplicate library names; the linker will be instructed to link against libraries as many times as they are mentioned.

set_libraries(libnames)¶: Set the list of libraries to be included in all links driven by this compiler object to libnames (a list of strings). This does not affect any standard system libraries that the linker may include by default.

add_library_dir(dir)¶: Add dir to the list of directories that will be searched for libraries specified to add_library() and set_libraries(). The linker will be instructed to search for libraries in the order they are supplied to add_library_dir() and/or set_library_dirs().

set_library_dirs(dirs)¶: Set the list of library search directories to dirs (a list of strings). This does not affect any standard library search path that the linker may search by default.

add_runtime_library_dir(dir)¶: Add dir to the list of directories that will be searched for shared libraries at runtime.

set_runtime_library_dirs(dirs)¶: Set the list of directories to search for shared libraries at runtime to dirs (a list of strings). This does not affect any standard search path that the runtime linker may search by default.

define_macro(name[, value=None])¶: Define a preprocessor macro for all compilations driven by this compiler object. The optional parameter value should be a string; if it is not supplied, then the macro will be defined without an explicit value and the exact outcome depends on the compiler used.

undefine_macro(name)¶: Undefine a preprocessor macro for all compilations driven by this compiler object. If the same macro is defined by define_macro() and undefined by undefine_macro() the last call takes precedence (including multiple redefinitions or undefinitions). If the macro is redefined/undefined on a per-compilation basis (ie. in the call to compile()), then that takes precedence.

add_link_object(object)¶: Add object to the list of object files (or analogues, such as explicitly named library files or the output of “resource compilers”) to be included in every link driven by this compiler object.

set_link_objects(objects)¶: Set the list of object files (or analogues) to be included in every link to objects. This does not affect any standard object files that the linker may include by default (such as system libraries).

The following methods implement methods for autodetection of compiler options, providing some functionality similar to GNU autoconf.

detect_language(sources)¶: Detect the language of a given file, or list of files. Uses the instance attributes language_map (a dictionary), and language_order (a list) to do the job.

find_library_file(dirs, lib[, debug=0])¶: Search the specified list of directories for a static or shared library file lib and return the full path to that file. If debug is true, look for a debugging version (if that makes sense on the current platform). Return None if lib wasn’t found in any of the specified directories.

has_function(funcname[, includes=None, include_dirs=None, libraries=None, library_dirs=None])¶: Return a boolean indicating whether funcname is supported on the current platform. The optional arguments can be used to augment the compilation environment by providing additional include files and paths and libraries and paths.

library_dir_option(dir)¶: Return the compiler option to add dir to the list of directories searched for libraries.

library_option(lib)¶: Return the compiler option to add lib to the list of libraries linked into the shared library or executable.

runtime_library_dir_option(dir)¶: Return the compiler option to add dir to the list of directories searched for runtime libraries.

set_executables(**args)¶

Define the executables (and options for them) that will be run to perform the various stages of compilation. The exact set of executables that may be specified here depends on the compiler class (via the ‘executables’ class attribute), but most will have:

atributo	description
compiler	the C/C++ compiler
linker_so	linker used to create shared objects and libraries
linker_exe	linker used to create binary executables
archiver	static library creator

On platforms with a command-line (Unix, DOS/Windows), each of these is a string that will be split into executable name and (optional) list of arguments. (Splitting the string is done similarly to how Unix shells operate: words are delimited by spaces, but quotes and backslashes can override this. See distutils.util.split_quoted().)

The following methods invoke stages in the build process.

compile(sources[, output_dir=None, macros=None, include_dirs=None, debug=0, extra_preargs=None, extra_postargs=None, depends=None])¶

Compile one or more source files. Generates object files (e.g. transforms a .c file to a .o file.)

sources must be a list of filenames, most likely C/C++ files, but in reality anything that can be handled by a particular compiler and compiler class (eg. MSVCCompiler can handle resource files in sources). Return a list of object filenames, one per source filename in sources. Depending on the implementation, not all source files will necessarily be compiled, but all corresponding object filenames will be returned.

If output_dir is given, object files will be put under it, while retaining their original path component. That is, foo/bar.c normally compiles to foo/bar.o (for a Unix implementation); if output_dir is build, then it would compile to build/foo/bar.o.

macros, if given, must be a list of macro definitions. A macro definition is either a (name, value) 2-tuple or a (name,) 1-tuple. The former defines a macro; if the value is None, the macro is defined without an explicit value. The 1-tuple case undefines a macro. Later definitions/redefinitions/undefinitions take precedence.

include_dirs, if given, must be a list of strings, the directories to add to the default include file search path for this compilation only.

debug is a boolean; if true, the compiler will be instructed to output debug symbols in (or alongside) the object file(s).

extra_preargs and extra_postargs are implementation-dependent. On platforms that have the notion of a command-line (e.g. Unix, DOS/Windows), they are most likely lists of strings: extra command-line arguments to prepend/append to the compiler command line. On other platforms, consult the implementation class documentation. In any event, they are intended as an escape hatch for those occasions when the abstract compiler framework doesn’t cut the mustard.

depends, if given, is a list of filenames that all targets depend on. If a source file is older than any file in depends, then the source file will be recompiled. This supports dependency tracking, but only at a coarse granularity.

Raises CompileError on failure.

create_static_lib(objects, output_libname[, output_dir=None, debug=0, target_lang=None])¶

Link a bunch of stuff together to create a static library file. The “bunch of stuff” consists of the list of object files supplied as objects, the extra object files supplied to add_link_object() and/or set_link_objects(), the libraries supplied to add_library() and/or set_libraries(), and the libraries supplied as libraries (if any).

output_libname should be a library name, not a filename; the filename will be inferred from the library name. output_dir is the directory where the library file will be put.

debug is a boolean; if true, debugging information will be included in the library (note that on most platforms, it is the compile step where this matters: the debug flag is included here just for consistency).

target_lang is the target language for which the given objects are being compiled. This allows specific linkage time treatment of certain languages.

Raises LibError on failure.

link(target_desc, objects, output_filename[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None])¶

Link a bunch of stuff together to create an executable or shared library file.

The “bunch of stuff” consists of the list of object files supplied as objects. output_filename should be a filename. If output_dir is supplied, output_filename is relative to it (i.e. output_filename can provide directory components if needed).

libraries is a list of libraries to link against. These are library names, not filenames, since they’re translated into filenames in a platform-specific way (eg. foo becomes libfoo.a on Unix and foo.lib on DOS/Windows). However, they can include a directory component, which means the linker will look in that specific directory rather than searching all the normal locations.

library_dirs, if supplied, should be a list of directories to search for libraries that were specified as bare library names (ie. no directory component). These are on top of the system default and those supplied to add_library_dir() and/or set_library_dirs(). runtime_library_dirs is a list of directories that will be embedded into the shared library and used to search for other shared libraries that *it* depends on at run-time. (This may only be relevant on Unix.)

export_symbols is a list of symbols that the shared library will export. (This appears to be relevant only on Windows.)

debug is as for compile() and create_static_lib(), with the slight distinction that it actually matters on most platforms (as opposed to create_static_lib(), which includes a debug flag mostly for form’s sake).

extra_preargs and extra_postargs are as for compile() (except of course that they supply command-line arguments for the particular linker being used).

target_lang is the target language for which the given objects are being compiled. This allows specific linkage time treatment of certain languages.

Raises LinkError on failure.

link_executable(objects, output_progname[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, debug=0, extra_preargs=None, extra_postargs=None, target_lang=None])¶: Link an executable. output_progname is the name of the file executable, while objects are a list of object filenames to link in. Other arguments are as for the link() method.

link_shared_lib(objects, output_libname[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None])¶: Link a shared library. output_libname is the name of the output library, while objects is a list of object filenames to link in. Other arguments are as for the link() method.

link_shared_object(objects, output_filename[, output_dir=None, libraries=None, library_dirs=None, runtime_library_dirs=None, export_symbols=None, debug=0, extra_preargs=None, extra_postargs=None, build_temp=None, target_lang=None])¶: Link a shared object. output_filename is the name of the shared object that will be created, while objects is a list of object filenames to link in. Other arguments are as for the link() method.

preprocess(source[, output_file=None, macros=None, include_dirs=None, extra_preargs=None, extra_postargs=None])¶

Preprocess a single C/C++ source file, named in source. Output will be written to file named output_file, or stdout if output_file not supplied. macros is a list of macro definitions as for compile(), which will augment the macros set with define_macro() and undefine_macro(). include_dirs is a list of directory names that will be added to the default list, in the same way as add_include_dir().

Raises PreprocessError on failure.

The following utility methods are defined by the CCompiler class, for use by the various concrete subclasses.

executable_filename(basename[, strip_dir=0, output_dir=''])¶: Returns the filename of the executable for the given basename. Typically for non-Windows platforms this is the same as the basename, while Windows will get a .exe added.

library_filename(libname[, lib_type='static', strip_dir=0, output_dir=''])¶: Returns the filename for the given library name on the current platform. On Unix a library with lib_type of 'static' will typically be of the form liblibname.a, while a lib_type of 'dynamic' will be of the form liblibname.so.

object_filenames(source_filenames[, strip_dir=0, output_dir=''])¶: Returns the name of the object files for the given source files. source_filenames should be a list of filenames.

shared_object_filename(basename[, strip_dir=0, output_dir=''])¶: Returns the name of a shared object file for the given file name basename.

execute(func, args[, msg=None, level=1])¶: Invokes distutils.util.execute(). This method invokes a Python function func with the given arguments args, after logging and taking into account the dry_run flag.

spawn(cmd)¶: Invokes distutils.util.spawn(). This invokes an external process to run the given command.

mkpath(name[, mode=511])¶: Invokes distutils.dir_util.mkpath(). This creates a directory and any missing ancestor directories.

move_file(src, dst)¶: Invokes distutils.file_util.move_file(). Renames src to dst.

announce(msg[, level=1])¶: Write a message using distutils.log.debug().

warn(msg)¶: Write a warning message msg to standard error.

debug_print(msg)¶: If the debug flag is set on this CCompiler instance, print msg to standard output, otherwise do nothing.

10.3. `distutils.unixccompiler` — Unix C Compiler¶

This module provides the UnixCCompiler class, a subclass of CCompiler that handles the typical Unix-style command-line C compiler:

macros defined with -Dname[=value]
macros undefined with -Uname
include search directories specified with -Idir
libraries specified with -llib
library search directories specified with -Ldir
compile handled by cc (or similar) executable with -c option: compiles .c to .o
link static library handled by ar command (possibly with ranlib)
link shared library handled by cc -shared

10.4. `distutils.msvccompiler` — Microsoft Compiler¶

This module provides MSVCCompiler, an implementation of the abstract CCompiler class for Microsoft Visual Studio. Typically, extension modules need to be compiled with the same compiler that was used to compile Python. For Python 2.3 and earlier, the compiler was Visual Studio 6. For Python 2.4 and 2.5, the compiler is Visual Studio .NET 2003. The AMD64 and Itanium binaries are created using the Platform SDK.

MSVCCompiler will normally choose the right compiler, linker etc. on its own. To override this choice, the environment variables DISTUTILS_USE_SDK and MSSdk must be both set. MSSdk indicates that the current environment has been setup by the SDK’s SetEnv.Cmd script, or that the environment variables had been registered when the SDK was installed; DISTUTILS_USE_SDK indicates that the distutils user has made an explicit choice to override the compiler selection by MSVCCompiler.

10.5. `distutils.bcppcompiler` — Borland Compiler¶

This module provides BorlandCCompiler, a subclass of the abstract CCompiler class for the Borland C++ compiler.

10.6. `distutils.cygwincompiler` — Cygwin Compiler¶

This module provides the CygwinCCompiler class, a subclass of UnixCCompiler that handles the Cygwin port of the GNU C compiler to Windows. It also contains the Mingw32CCompiler class which handles the mingw32 port of GCC (same as cygwin in no-cygwin mode).

10.7. `distutils.archive_util` — Archiving utilities¶

This module provides a few functions for creating archive files, such as tarballs or zipfiles.

distutils.archive_util.make_archive(base_name, format[, root_dir=None, base_dir=None, verbose=0, dry_run=0])¶: Create an archive file (eg. zip or tar). base_name is the name of the file to create, minus any format-specific extension; format is the archive format: one of zip, tar, gztar, bztar, xztar, or ztar. root_dir is a directory that will be the root directory of the archive; ie. we typically chdir into root_dir before creating the archive. base_dir is the directory where we start archiving from; ie. base_dir will be the common prefix of all files and directories in the archive. root_dir and base_dir both default to the current directory. Returns the name of the archive file.

Alterado na versão 3.5: Added support for the xztar format.

distutils.archive_util.make_tarball(base_name, base_dir[, compress='gzip', verbose=0, dry_run=0])¶: ‘Create an (optional compressed) archive as a tar file from all files in and under base_dir. compress must be 'gzip' (the default), 'bzip2', 'xz', 'compress', or None. For the 'compress' method the compression utility named by compress must be on the default program search path, so this is probably Unix-specific. The output tar file will be named base_dir.tar, possibly plus the appropriate compression extension (.gz, .bz2, .xz or .Z). Return the output filename.

Alterado na versão 3.5: Added support for the xz compression.

distutils.archive_util.make_zipfile(base_name, base_dir[, verbose=0, dry_run=0])¶: Create a zip file from all files in and under base_dir. The output zip file will be named base_name + .zip. Uses either the zipfile Python module (if available) or the InfoZIP zip utility (if installed and found on the default search path). If neither tool is available, raises DistutilsExecError. Returns the name of the output zip file.

10.8. `distutils.dep_util` — Dependency checking¶

This module provides functions for performing simple, timestamp-based dependency of files and groups of files; also, functions based entirely on such timestamp dependency analysis.

distutils.dep_util.newer(source, target)¶: Return true if source exists and is more recently modified than target, or if source exists and target doesn’t. Return false if both exist and target is the same age or newer than source. Raise DistutilsFileError if source does not exist.

distutils.dep_util.newer_pairwise(sources, targets)¶: Walk two filename lists in parallel, testing if each source is newer than its corresponding target. Return a pair of lists (sources, targets) where source is newer than target, according to the semantics of newer().

distutils.dep_util.newer_group(sources, target[, missing='error'])¶: Return true if target is out-of-date with respect to any file listed in sources. In other words, if target exists and is newer than every file in sources, return false; otherwise return true. missing controls what we do when a source file is missing; the default ('error') is to blow up with an OSError from inside os.stat(); if it is 'ignore', we silently drop any missing source files; if it is 'newer', any missing source files make us assume that target is out-of-date (this is handy in “dry-run” mode: it’ll make you pretend to carry out commands that wouldn’t work because inputs are missing, but that doesn’t matter because you’re not actually going to run the commands).

10.9. `distutils.dir_util` — Directory tree operations¶

This module provides functions for operating on directories and trees of directories.

distutils.dir_util.mkpath(name[, mode=0o777, verbose=0, dry_run=0])¶: Create a directory and any missing ancestor directories. If the directory already exists (or if name is the empty string, which means the current directory, which of course exists), then do nothing. Raise DistutilsFileError if unable to create some directory along the way (eg. some sub-path exists, but is a file rather than a directory). If verbose is true, print a one-line summary of each mkdir to stdout. Return the list of directories actually created.

distutils.dir_util.create_tree(base_dir, files[, mode=0o777, verbose=0, dry_run=0])¶: Create all the empty directories under base_dir needed to put files there. base_dir is just the name of a directory which doesn’t necessarily exist yet; files is a list of filenames to be interpreted relative to base_dir. base_dir + the directory portion of every file in files will be created if it doesn’t already exist. mode, verbose and dry_run flags are as for mkpath().

distutils.dir_util.copy_tree(src, dst[, preserve_mode=1, preserve_times=1, preserve_symlinks=0, update=0, verbose=0, dry_run=0])¶

Copy an entire directory tree src to a new location dst. Both src and dst must be directory names. If src is not a directory, raise DistutilsFileError. If dst does not exist, it is created with mkpath(). The end result of the copy is that every file in src is copied to dst, and directories under src are recursively copied to dst. Return the list of files that were copied or might have been copied, using their output name. The return value is unaffected by update or dry_run: it is simply the list of all files under src, with the names changed to be under dst.

preserve_mode and preserve_times are the same as for distutils.file_util.copy_file(); note that they only apply to regular files, not to directories. If preserve_symlinks is true, symlinks will be copied as symlinks (on platforms that support them!); otherwise (the default), the destination of the symlink will be copied. update and verbose are the same as for copy_file().

Files in src that begin with .nfs are skipped (more information on these files is available in answer D2 of the NFS FAQ page).

Alterado na versão 3.3.1: NFS files are ignored.

distutils.dir_util.remove_tree(directory[, verbose=0, dry_run=0])¶: Recursively remove directory and all files and directories underneath it. Any errors are ignored (apart from being reported to sys.stdout if verbose is true).

10.10. `distutils.file_util` — Single file operations¶

This module contains some utility functions for operating on individual files.

distutils.file_util.copy_file(src, dst[, preserve_mode=1, preserve_times=1, update=0, link=None, verbose=0, dry_run=0])¶

Copy file src to dst. If dst is a directory, then src is copied there with the same name; otherwise, it must be a filename. (If the file exists, it will be ruthlessly clobbered.) If preserve_mode is true (the default), the file’s mode (type and permission bits, or whatever is analogous on the current platform) is copied. If preserve_times is true (the default), the last-modified and last-access times are copied as well. If update is true, src will only be copied if dst does not exist, or if dst does exist but is older than src.

link allows you to make hard links (using os.link()) or symbolic links (using os.symlink()) instead of copying: set it to 'hard' or 'sym'; if it is None (the default), files are copied. Don’t set link on systems that don’t support it: copy_file() doesn’t check if hard or symbolic linking is available. It uses _copy_file_contents() to copy file contents.

Return a tuple (dest_name, copied): dest_name is the actual name of the output file, and copied is true if the file was copied (or would have been copied, if dry_run true).

distutils.file_util.move_file(src, dst[, verbose, dry_run])¶: Move file src to dst. If dst is a directory, the file will be moved into it with the same name; otherwise, src is just renamed to dst. Returns the new full name of the file.

Aviso

Handles cross-device moves on Unix using copy_file(). What about other systems?

distutils.file_util.write_file(filename, contents)¶: Create a file called filename and write contents (a sequence of strings without line terminators) to it.

10.11. `distutils.util` — Miscellaneous other utility functions¶

This module contains other assorted bits and pieces that don’t fit into any other utility module.

distutils.util.get_platform()¶

Return a string that identifies the current platform. This is used mainly to distinguish platform-specific build directories and platform-specific built distributions. Typically includes the OS name and version and the architecture (as supplied by ‘os.uname()’), although the exact information included depends on the OS; eg. for IRIX the architecture isn’t particularly important (IRIX only runs on SGI hardware), but for Linux the kernel version isn’t particularly important.

Exemplos de valores retornados:

linux-i586
linux-alpha
solaris-2.6-sun4u
irix-5.3
irix64-6.2

For non-POSIX platforms, currently just returns sys.platform.

For Mac OS X systems the OS version reflects the minimal version on which binaries will run (that is, the value of MACOSX_DEPLOYMENT_TARGET during the build of Python), not the OS version of the current system.

For universal binary builds on Mac OS X the architecture value reflects the universal binary status instead of the architecture of the current processor. For 32-bit universal binaries the architecture is fat, for 64-bit universal binaries the architecture is fat64, and for 4-way universal binaries the architecture is universal. Starting from Python 2.7 and Python 3.2 the architecture fat3 is used for a 3-way universal build (ppc, i386, x86_64) and intel is used for a universal build with the i386 and x86_64 architectures

Examples of returned values on Mac OS X:

macosx-10.3-ppc
macosx-10.3-fat
macosx-10.5-universal
macosx-10.6-intel

distutils.util.convert_path(pathname)¶: Return ‘pathname’ as a name that will work on the native filesystem, i.e. split it on ‘/’ and put it back together again using the current directory separator. Needed because filenames in the setup script are always supplied in Unix style, and have to be converted to the local convention before we can actually use them in the filesystem. Raises ValueError on non-Unix-ish systems if pathname either starts or ends with a slash.

distutils.util.change_root(new_root, pathname)¶: Return pathname with new_root prepended. If pathname is relative, this is equivalent to os.path.join(new_root,pathname) Otherwise, it requires making pathname relative and then joining the two, which is tricky on DOS/Windows.

distutils.util.check_environ()¶

Ensure that ‘os.environ’ has all the environment variables we guarantee that users can use in config files, command-line options, etc. Currently this includes:

HOME - user’s home directory (Unix only)
PLAT - description of the current platform, including hardware and OS (see get_platform())

distutils.util.subst_vars(s, local_vars)¶

Perform shell/Perl-style variable substitution on s. Every occurrence of $ followed by a name is considered a variable, and variable is substituted by the value found in the local_vars dictionary, or in os.environ if it’s not in local_vars. os.environ is first checked/augmented to guarantee that it contains certain values: see check_environ(). Raise ValueError for any variables not found in either local_vars or os.environ.

Note that this is not a fully-fledged string interpolation function. A valid $variable can consist only of upper and lower case letters, numbers and an underscore. No { } or ( ) style quoting is available.

distutils.util.split_quoted(s)¶: Split a string up according to Unix shell-like rules for quotes and backslashes. In short: words are delimited by spaces, as long as those spaces are not escaped by a backslash, or inside a quoted string. Single and double quotes are equivalent, and the quote characters can be backslash-escaped. The backslash is stripped from any two-character escape sequence, leaving only the escaped character. The quote characters are stripped from any quoted string. Returns a list of words.

distutils.util.execute(func, args[, msg=None, verbose=0, dry_run=0])¶: Perform some action that affects the outside world (for instance, writing to the filesystem). Such actions are special because they are disabled by the dry_run flag. This method takes care of all that bureaucracy for you; all you have to do is supply the function to call and an argument tuple for it (to embody the “external action” being performed), and an optional message to print.

distutils.util.strtobool(val)¶

Convert a string representation of truth to true (1) or false (0).

True values are y, yes, t, true, on and 1; false values are n, no, f, false, off and 0. Raises ValueError if val is anything else.

distutils.util.byte_compile(py_files[, optimize=0, force=0, prefix=None, base_dir=None, verbose=1, dry_run=0, direct=None])¶

Byte-compile a collection of Python source files to .pyc files in a __pycache__ subdirectory (see PEP 3147 and PEP 488). py_files is a list of files to compile; any files that don’t end in .py are silently skipped. optimize must be one of the following:

0 - don’t optimize
1 - normal optimization (like python -O)
2 - extra optimization (like python -OO)

If force is true, all files are recompiled regardless of timestamps.

The source filename encoded in each bytecode file defaults to the filenames listed in py_files; you can modify these with prefix and basedir. prefix is a string that will be stripped off of each source filename, and base_dir is a directory name that will be prepended (after prefix is stripped). You can supply either or both (or neither) of prefix and base_dir, as you wish.

If dry_run is true, doesn’t actually do anything that would affect the filesystem.

Byte-compilation is either done directly in this interpreter process with the standard py_compile module, or indirectly by writing a temporary script and executing it. Normally, you should let byte_compile() figure out to use direct compilation or not (see the source for details). The direct flag is used by the script generated in indirect mode; unless you know what you’re doing, leave it set to None.

Alterado na versão 3.2.3: Create .pyc files with an import magic tag in their name, in a __pycache__ subdirectory instead of files without tag in the current directory.

Alterado na versão 3.5: Create .pyc files according to PEP 488.

distutils.util.rfc822_escape(header)¶: Return a version of header escaped for inclusion in an RFC 822 header, by ensuring there are 8 spaces space after each newline. Note that it does no other modification of the string.

10.12. `distutils.dist` — The Distribution class¶

This module provides the Distribution class, which represents the module distribution being built/installed/distributed.

10.13. `distutils.extension` — The Extension class¶

This module provides the Extension class, used to describe C/C++ extension modules in setup scripts.

10.14. `distutils.debug` — Distutils debug mode¶

This module provides the DEBUG flag.

10.15. `distutils.errors` — Distutils exceptions¶

Provides exceptions used by the Distutils modules. Note that Distutils modules may raise standard exceptions; in particular, SystemExit is usually raised for errors that are obviously the end-user’s fault (eg. bad command-line arguments).

This module is safe to use in from ... import * mode; it only exports symbols whose names start with Distutils and end with Error.

10.16. `distutils.fancy_getopt` — Wrapper around the standard getopt module¶

This module provides a wrapper around the standard getopt module that provides the following additional features:

short and long options are tied together
options have help strings, so fancy_getopt() could potentially create a complete usage summary
options set attributes of a passed-in object
boolean options can have “negative aliases” — eg. if --quiet is the “negative alias” of --verbose, then --quiet on the command line sets verbose to false.

distutils.fancy_getopt.fancy_getopt(options, negative_opt, object, args)¶: Wrapper function. options is a list of (long_option, short_option, help_string) 3-tuples as described in the constructor for FancyGetopt. negative_opt should be a dictionary mapping option names to option names, both the key and value should be in the options list. object is an object which will be used to store values (see the getopt() method of the FancyGetopt class). args is the argument list. Will use sys.argv[1:] if you pass None as args.

distutils.fancy_getopt.wrap_text(text, width)¶: Wraps text to less than width wide.

class distutils.fancy_getopt.FancyGetopt([option_table=None])¶

The option_table is a list of 3-tuples: (long_option, short_option, help_string)

If an option takes an argument, its long_option should have '=' appended; short_option should just be a single character, no ':' in any case. short_option should be None if a long_option doesn’t have a corresponding short_option. All option tuples must have long options.

The FancyGetopt class provides the following methods:

FancyGetopt.getopt([args=None, object=None])¶

Parse command-line options in args. Store as attributes on object.

If args is None or not supplied, uses sys.argv[1:]. If object is None or not supplied, creates a new OptionDummy instance, stores option values there, and returns a tuple (args, object). If object is supplied, it is modified in place and getopt() just returns args; in both cases, the returned args is a modified copy of the passed-in args list, which is left untouched.

FancyGetopt.get_option_order()¶: Returns the list of (option, value) tuples processed by the previous run of getopt() Raises RuntimeError if getopt() hasn’t been called yet.

FancyGetopt.generate_help([header=None])¶

Generate help text (a list of strings, one per suggested line of output) from the option table for this FancyGetopt object.

If supplied, prints the supplied header at the top of the help.

10.17. `distutils.filelist` — The FileList class¶

This module provides the FileList class, used for poking about the filesystem and building lists of files.

10.18. `distutils.log` — Simple PEP 282-style logging¶

10.19. `distutils.spawn` — Spawn a sub-process¶

This module provides the spawn() function, a front-end to various platform-specific functions for launching another program in a sub-process. Also provides find_executable() to search the path for a given executable name.

10.20. `distutils.sysconfig` — System configuration information¶

The distutils.sysconfig module provides access to Python’s low-level configuration information. The specific configuration variables available depend heavily on the platform and configuration. The specific variables depend on the build process for the specific version of Python being run; the variables are those found in the Makefile and configuration header that are installed with Python on Unix systems. The configuration header is called pyconfig.h for Python versions starting with 2.2, and config.h for earlier versions of Python.

Some additional functions are provided which perform some useful manipulations for other parts of the distutils package.

distutils.sysconfig.PREFIX¶: The result of os.path.normpath(sys.prefix).

distutils.sysconfig.EXEC_PREFIX¶: The result of os.path.normpath(sys.exec_prefix).

distutils.sysconfig.get_config_var(name)¶: Return the value of a single variable. This is equivalent to get_config_vars().get(name).

distutils.sysconfig.get_config_vars(...)¶: Return a set of variable definitions. If there are no arguments, this returns a dictionary mapping names of configuration variables to values. If arguments are provided, they should be strings, and the return value will be a sequence giving the associated values. If a given name does not have a corresponding value, None will be included for that variable.

distutils.sysconfig.get_config_h_filename()¶: Return the full path name of the configuration header. For Unix, this will be the header generated by the configure script; for other platforms the header will have been supplied directly by the Python source distribution. The file is a platform-specific text file.

distutils.sysconfig.get_makefile_filename()¶: Return the full path name of the Makefile used to build Python. For Unix, this will be a file generated by the configure script; the meaning for other platforms will vary. The file is a platform-specific text file, if it exists. This function is only useful on POSIX platforms.

distutils.sysconfig.get_python_inc([plat_specific[, prefix]])¶: Return the directory for either the general or platform-dependent C include files. If plat_specific is true, the platform-dependent include directory is returned; if false or omitted, the platform-independent directory is returned. If prefix is given, it is used as either the prefix instead of PREFIX, or as the exec-prefix instead of EXEC_PREFIX if plat_specific is true.

distutils.sysconfig.get_python_lib([plat_specific[, standard_lib[, prefix]]])¶: Return the directory for either the general or platform-dependent library installation. If plat_specific is true, the platform-dependent include directory is returned; if false or omitted, the platform-independent directory is returned. If prefix is given, it is used as either the prefix instead of PREFIX, or as the exec-prefix instead of EXEC_PREFIX if plat_specific is true. If standard_lib is true, the directory for the standard library is returned rather than the directory for the installation of third-party extensions.

The following function is only intended for use within the distutils package.

distutils.sysconfig.customize_compiler(compiler)¶

Do any platform-specific customization of a distutils.ccompiler.CCompiler instance.

This function is only needed on Unix at this time, but should be called consistently to support forward-compatibility. It inserts the information that varies across Unix flavors and is stored in Python’s Makefile. This information includes the selected compiler, compiler and linker options, and the extension used by the linker for shared objects.

This function is even more special-purpose, and should only be used from Python’s own build procedures.

distutils.sysconfig.set_python_build()¶: Inform the distutils.sysconfig module that it is being used as part of the build process for Python. This changes a lot of relative locations for files, allowing them to be located in the build area rather than in an installed Python.

10.21. `distutils.text_file` — The TextFile class¶

This module provides the TextFile class, which gives an interface to text files that (optionally) takes care of stripping comments, ignoring blank lines, and joining lines with backslashes.

class distutils.text_file.TextFile([filename=None, file=None, **options])¶

This class provides a file-like object that takes care of all the things you commonly want to do when processing a text file that has some line-by-line syntax: strip comments (as long as # is your comment character), skip blank lines, join adjacent lines by escaping the newline (ie. backslash at end of line), strip leading and/or trailing whitespace. All of these are optional and independently controllable.

The class provides a warn() method so you can generate warning messages that report physical line number, even if the logical line in question spans multiple physical lines. Also provides unreadline() for implementing line-at-a-time lookahead.

TextFile instances are create with either filename, file, or both. RuntimeError is raised if both are None. filename should be a string, and file a file object (or something that provides readline() and close() methods). It is recommended that you supply at least filename, so that TextFile can include it in warning messages. If file is not supplied, TextFile creates its own using the open() built-in function.

The options are all boolean, and affect the values returned by readline()

nome da opção	description	default
strip_comments	strip from `'#'` to end-of-line, as well as any whitespace leading up to the `'#'`—unless it is escaped by a backslash	true
lstrip_ws	strip leading whitespace from each line before returning it	false
rstrip_ws	strip trailing whitespace (including line terminator!) from each line before returning it.	true
skip_blanks	skip lines that are empty after stripping comments and whitespace. (If both lstrip_ws and rstrip_ws are false, then some lines may consist of solely whitespace: these will not be skipped, even if skip_blanks is true.)	true
join_lines	if a backslash is the last non-newline character on a line after stripping comments and whitespace, join the following line to it to form one logical line; if N consecutive lines end with a backslash, then N+1 physical lines will be joined to form one logical line.	false
collapse_join	strip leading whitespace from lines that are joined to their predecessor; only matters if `(join_lines and not lstrip_ws)`	false

Note that since rstrip_ws can strip the trailing newline, the semantics of readline() must differ from those of the built-in file object’s readline() method! In particular, readline() returns None for end-of-file: an empty string might just be a blank line (or an all-whitespace line), if rstrip_ws is true but skip_blanks is not.

open(filename)¶: Open a new file filename. This overrides any file or filename constructor arguments.

close()¶: Close the current file and forget everything we know about it (including the filename and the current line number).

warn(msg[, line=None])¶: Print (to stderr) a warning message tied to the current logical line in the current file. If the current logical line in the file spans multiple physical lines, the warning refers to the whole range, such as "lines 3-5". If line is supplied, it overrides the current line number; it may be a list or tuple to indicate a range of physical lines, or an integer for a single physical line.

readline()¶: Read and return a single logical line from the current file (or from an internal buffer if lines have previously been “unread” with unreadline()). If the join_lines option is true, this may involve reading multiple physical lines concatenated into a single string. Updates the current line number, so calling warn() after readline() emits a warning about the physical line(s) just read. Returns None on end-of-file, since the empty string can occur if rstrip_ws is true but strip_blanks is not.

readlines()¶: Read and return the list of all logical lines remaining in the current file. This updates the current line number to the last line of the file.

unreadline(line)¶: Push line (a string) onto an internal buffer that will be checked by future readline() calls. Handy for implementing a parser with line-at-a-time lookahead. Note that lines that are “unread” with unreadline() are not subsequently re-cleansed (whitespace stripped, or whatever) when read with readline(). If multiple calls are made to unreadline() before a call to readline(), the lines will be returned most in most recent first order.

10.22. `distutils.version` — Version number classes¶

10.23. `distutils.cmd` — Abstract base class for Distutils commands¶

This module supplies the abstract base class Command.

class distutils.cmd.Command(dist)¶

Abstract base class for defining command classes, the “worker bees” of the Distutils. A useful analogy for command classes is to think of them as subroutines with local variables called options. The options are declared in initialize_options() and defined (given their final values) in finalize_options(), both of which must be defined by every command class. The distinction between the two is necessary because option values might come from the outside world (command line, config file, …), and any options dependent on other options must be computed after these outside influences have been processed — hence finalize_options(). The body of the subroutine, where it does all its work based on the values of its options, is the run() method, which must also be implemented by every command class.

The class constructor takes a single argument dist, a Distribution instance.

10.24. Creating a new Distutils command¶

This section outlines the steps to create a new Distutils command.

A new command lives in a module in the distutils.command package. There is a sample template in that directory called command_template. Copy this file to a new module with the same name as the new command you’re implementing. This module should implement a class with the same name as the module (and the command). So, for instance, to create the command peel_banana (so that users can run setup.py peel_banana), you’d copy command_template to distutils/command/peel_banana.py, then edit it so that it’s implementing the class peel_banana, a subclass of distutils.cmd.Command.

Subclasses of Command must define the following methods.

Command.initialize_options()¶: Set default values for all the options that this command supports. Note that these defaults may be overridden by other commands, by the setup script, by config files, or by the command-line. Thus, this is not the place to code dependencies between options; generally, initialize_options() implementations are just a bunch of self.foo = None assignments.

Command.finalize_options()¶: Set final values for all the options that this command supports. This is always called as late as possible, ie. after any option assignments from the command-line or from other commands have been done. Thus, this is the place to code option dependencies: if foo depends on bar, then it is safe to set foo from bar as long as foo still has the same value it was assigned in initialize_options().

Command.run()¶: A command’s raison d’etre: carry out the action it exists to perform, controlled by the options initialized in initialize_options(), customized by other commands, the setup script, the command-line, and config files, and finalized in finalize_options(). All terminal output and filesystem interaction should be done by run().

Command.sub_commands¶

sub_commands formalizes the notion of a “family” of commands, e.g. install as the parent with sub-commands install_lib, install_headers, etc. The parent of a family of commands defines sub_commands as a class attribute; it’s a list of 2-tuples (command_name, predicate), with command_name a string and predicate a function, a string or None. predicate is a method of the parent command that determines whether the corresponding command is applicable in the current situation. (E.g. install_headers is only applicable if we have any C header files to install.) If predicate is None, that command is always applicable.

sub_commands is usually defined at the end of a class, because predicates can be methods of the class, so they must already have been defined. The canonical example is the install command.

10.25. `distutils.command` — Individual Distutils commands¶

10.26. `distutils.command.bdist` — Build a binary installer¶

10.27. `distutils.command.bdist_packager` — Abstract base class for packagers¶

10.28. `distutils.command.bdist_dumb` — Build a “dumb” installer¶

10.29. `distutils.command.bdist_msi` — Build a Microsoft Installer binary package¶

class distutils.command.bdist_msi.bdist_msi¶

Builds a Windows Installer (.msi) binary package.

In most cases, the bdist_msi installer is a better choice than the bdist_wininst installer, because it provides better support for Win64 platforms, allows administrators to perform non-interactive installations, and allows installation through group policies.

10.30. `distutils.command.bdist_rpm` — Build a binary distribution as a Redhat RPM and SRPM¶

10.31. `distutils.command.bdist_wininst` — Build a Windows installer¶

10.32. `distutils.command.sdist` — Build a source distribution¶

10.33. `distutils.command.build` — Build all files of a package¶

10.34. `distutils.command.build_clib` — Build any C libraries in a package¶

10.35. `distutils.command.build_ext` — Build any extensions in a package¶

10.36. `distutils.command.build_py` — Build the .py/.pyc files of a package¶

class distutils.command.build_py.build_py¶

class distutils.command.build_py.build_py_2to3¶

Alternative implementation of build_py which also runs the 2to3 conversion library on each .py file that is going to be installed. To use this in a setup.py file for a distribution that is designed to run with both Python 2.x and 3.x, add:

try:
    from distutils.command.build_py import build_py_2to3 as build_py
except ImportError:
    from distutils.command.build_py import build_py

to your setup.py, and later:

cmdclass = {'build_py': build_py}

to the invocation of setup().

10.37. `distutils.command.build_scripts` — Build the scripts of a package¶

10.38. `distutils.command.clean` — Clean a package build area¶

This command removes the temporary files created by build and its subcommands, like intermediary compiled object files. With the --all option, the complete build directory will be removed.

Extension modules built in place will not be cleaned, as they are not in the build directory.

10.39. `distutils.command.config` — Perform package configuration¶

10.40. `distutils.command.install` — Install a package¶

10.41. `distutils.command.install_data` — Install data files from a package¶

10.42. `distutils.command.install_headers` — Install C/C++ header files from a package¶

10.43. `distutils.command.install_lib` — Install library files from a package¶

10.44. `distutils.command.install_scripts` — Install script files from a package¶

10.45. `distutils.command.register` — Register a module with the Python Package Index¶

The register command registers the package with the Python Package Index. This is described in more detail in PEP 301.

10.46. `distutils.command.check` — Check the meta-data of a package¶

The check command performs some tests on the meta-data of a package. For example, it verifies that all required meta-data are provided as the arguments passed to the setup() function.

10. Referência da API¶

10.1. distutils.core — funcionalidade principal Distutils¶

10.2. distutils.ccompiler — CCompiler base class¶

10.3. distutils.unixccompiler — Unix C Compiler¶

10.4. distutils.msvccompiler — Microsoft Compiler¶

10.5. distutils.bcppcompiler — Borland Compiler¶

10.6. distutils.cygwincompiler — Cygwin Compiler¶

10.7. distutils.archive_util — Archiving utilities¶

10.8. distutils.dep_util — Dependency checking¶

10.9. distutils.dir_util — Directory tree operations¶

10.10. distutils.file_util — Single file operations¶

10.11. distutils.util — Miscellaneous other utility functions¶

10.12. distutils.dist — The Distribution class¶

10.13. distutils.extension — The Extension class¶

10.14. distutils.debug — Distutils debug mode¶

10.15. distutils.errors — Distutils exceptions¶

10.16. distutils.fancy_getopt — Wrapper around the standard getopt module¶

10.17. distutils.filelist — The FileList class¶

10.18. distutils.log — Simple PEP 282-style logging¶

10.19. distutils.spawn — Spawn a sub-process¶

10.20. distutils.sysconfig — System configuration information¶

10.21. distutils.text_file — The TextFile class¶

10.22. distutils.version — Version number classes¶

10.23. distutils.cmd — Abstract base class for Distutils commands¶

10.24. Creating a new Distutils command¶

10.25. distutils.command — Individual Distutils commands¶

10.26. distutils.command.bdist — Build a binary installer¶

10.27. distutils.command.bdist_packager — Abstract base class for packagers¶

10.28. distutils.command.bdist_dumb — Build a “dumb” installer¶

10.29. distutils.command.bdist_msi — Build a Microsoft Installer binary package¶

10.30. distutils.command.bdist_rpm — Build a binary distribution as a Redhat RPM and SRPM¶

10.31. distutils.command.bdist_wininst — Build a Windows installer¶

10.32. distutils.command.sdist — Build a source distribution¶

10.33. distutils.command.build — Build all files of a package¶

10.34. distutils.command.build_clib — Build any C libraries in a package¶

10.35. distutils.command.build_ext — Build any extensions in a package¶

10.36. distutils.command.build_py — Build the .py/.pyc files of a package¶

10.37. distutils.command.build_scripts — Build the scripts of a package¶

10.38. distutils.command.clean — Clean a package build area¶

10.39. distutils.command.config — Perform package configuration¶

10.40. distutils.command.install — Install a package¶

10.41. distutils.command.install_data — Install data files from a package¶

10.42. distutils.command.install_headers — Install C/C++ header files from a package¶

10.43. distutils.command.install_lib — Install library files from a package¶

10.44. distutils.command.install_scripts — Install script files from a package¶

10.45. distutils.command.register — Register a module with the Python Package Index¶

10.46. distutils.command.check — Check the meta-data of a package¶