"pathlib" --- Caminhos do sistema de arquivos orientados a objetos
******************************************************************

Adicionado na versão 3.4.

**Código-fonte:** Lib/pathlib/

======================================================================

Este módulo oferece classes que representam caminhos de sistema de
arquivos com semântica apropriada para diferentes sistemas
operacionais. As classes de caminho são divididas entre caminhos
puros, que fornecem operações puramente computacionais sem E/S, e
caminhos concretos, que herdam de caminhos puros, mas também fornecem
operações de E/S.

[imagem: Inheritance diagram showing the classes available in pathlib.
The most basic class is PurePath, which has three direct subclasses:
PurePosixPath, PureWindowsPath, and Path. Further to these four
classes, there are two classes that use multiple inheritance:
PosixPath subclasses PurePosixPath and Path, and WindowsPath
subclasses PureWindowsPath and Path.][imagem]

Se você nunca usou este módulo antes ou apenas não tem certeza de qual
classe é a certa para sua tarefa, provavelmente "Path" é o que você
precisa. Ele instancia um caminho concreto para a plataforma em que o
código está sendo executado.

Caminhos puros são úteis em alguns casos especiais. Por exemplo:

1. Se você deseja manipular os caminhos do Windows em uma máquina Unix
   (ou vice-versa). Você não pode instanciar uma "WindowsPath" quando
   executado no Unix, mas você pode instanciar "PureWindowsPath".

2. Você quer ter certeza de que seu código apenas manipula caminhos,
   sem realmente acessar o sistema operacional. Nesse caso, instanciar
   uma das classes puras pode ser útil, pois elas simplesmente não têm
   nenhuma operação de acesso ao sistema operacional.

Ver também:

  **PEP 428**: O módulo pathlib -- caminhos de sistema de arquivos
  orientados a objetos.

Ver também:

  Para manipulação de caminho de baixo nível em strings, você também
  pode usar o módulo "os.path".


Uso básico
==========

Importação da classe principal:

   >>> from pathlib import Path

Listando os subdiretórios:

   >>> p = Path('.')
   >>> [x for x in p.iterdir() if x.is_dir()]
   [PosixPath('.hg'), PosixPath('docs'), PosixPath('dist'),
    PosixPath('__pycache__'), PosixPath('build')]

Listando os arquivos fontes do Python e sua árvore de diretórios:

   >>> list(p.glob('**/*.py'))
   [PosixPath('test_pathlib.py'), PosixPath('setup.py'),
    PosixPath('pathlib.py'), PosixPath('docs/conf.py'),
    PosixPath('build/lib/pathlib.py')]

Navegando dentro da árvore de diretórios:

   >>> p = Path('/etc')
   >>> q = p / 'init.d' / 'reboot'
   >>> q
   PosixPath('/etc/init.d/reboot')
   >>> q.resolve()
   PosixPath('/etc/rc.d/init.d/halt')

Consultando as propriedades do path:

   >>> q.exists()
   True
   >>> q.is_dir()
   False

Abrindo um arquivo:

   >>> with q.open() as f: f.readline()
   ...
   '#!/bin/bash\n'


Exceções
========

exception pathlib.UnsupportedOperation

   Uma exceção herdada de "NotImplementedError" que é levantada quando
   uma operação não suportada é chamada em um objeto caminho.

   Adicionado na versão 3.13.


Caminhos puros
==============

Objetos de caminho puro fornecem operações de manipulação de caminho
que, na verdade, não acessam um sistema de arquivos. Existem três
maneiras de acessar essas classes, que também chamamos de *sabores*:

class pathlib.PurePath(*pathsegments)

   Uma classe genérica que representa o tipo de caminho do sistema
   (instanciando-a cria uma "PurePosixPath" ou uma "PureWindowsPath"):

      >>> PurePath('setup.py')      # Running on a Unix machine
      PurePosixPath('setup.py')

   Cada elemento de *pathsegments* pode ser uma string representando
   um segmento de caminho, um objeto que implementa a interface  que
   retorna uma string ou um objeto implementando a interface
   "os.PathLike", onde o método "__fspath__()" retorna uma string,
   como outro objeto caminho:

      >>> PurePath('foo', 'some/path', 'bar')
      PurePosixPath('foo/some/path/bar')
      >>> PurePath(Path('foo'), Path('bar'))
      PurePosixPath('foo/bar')

   Quando *pathsegments* está vazio, o diretório atual é presumido:

      >>> PurePath()
      PurePosixPath('.')

   Se um segmento for um caminho absoluto, todos os segmentos
   anteriores serão ignorados (como "os.path.join()"):

      >>> PurePath('/etc', '/usr', 'lib64')
      PurePosixPath('/usr/lib64')
      >>> PureWindowsPath('c:/Windows', 'd:bar')
      PureWindowsPath('d:bar')

   No Windows, a unidade não é redefinida quando um segmento de
   caminho relativo enraizado (por exemplo, "r'\foo'") é encontrado:

      >>> PureWindowsPath('c:/Windows', '/Program Files')
      PureWindowsPath('c:/Program Files')

   Barras espúrias e pontos simples são recolhidos, mas pontos duplos
   ("'..'") e barras duplas iniciais ("'//'") não são, pois isso
   mudaria o significado de um caminho por vários motivos (por
   exemplo, links simbólicos, caminhos UNC):

      >>> PurePath('foo//bar')
      PurePosixPath('foo/bar')
      >>> PurePath('//foo/bar')
      PurePosixPath('//foo/bar')
      >>> PurePath('foo/./bar')
      PurePosixPath('foo/bar')
      >>> PurePath('foo/../bar')
      PurePosixPath('foo/../bar')

   (uma abordagem ingênua seria criar "PurePosixPath('foo/../bar')"
   equivalente a "PurePosixPath('bar')", o que é errado se "foo" for
   um link simbólico para outro diretório)

   Objetos caminho puro implementam a interface "os.PathLike",
   permitindo que sejam usados em qualquer lugar em que a interface
   seja aceita.

   Alterado na versão 3.6: Adicionado suporte para a interface
   "os.PathLike".

class pathlib.PurePosixPath(*pathsegments)

   Uma subclasse de "PurePath", este tipo de caminho representa
   caminhos de sistema de arquivos não Windows:

      >>> PurePosixPath('/etc')
      PurePosixPath('/etc')

   *pathsegments* é especificado de forma similar para "PurePath".

class pathlib.PureWindowsPath(*pathsegments)

   Uma subclasse de "PurePath", este tipo de caminho representa os
   caminhos do sistema de arquivos do Windows, incluindo Caminhos UNC:

      >>> PureWindowsPath('c:/Program Files/')
      PureWindowsPath('c:/Program Files')
      >>> PureWindowsPath('//server/share/file')
      PureWindowsPath('//server/share/file')

   *pathsegments* é especificado de forma similar para "PurePath".

Independentemente do sistema em que você está usando, você pode
instanciar todas essas classes, uma vez que elas não fornecem nenhuma
operação que faça chamadas de sistema.


Propriedades gerais
-------------------

Os caminhos são imutáveis e *hasheáveis*. Os caminhos do mesmo sabor
são comparáveis e ordenáveis. Essas propriedades respeitam a semântica
de caixa alta e baixa do sabor:

   >>> PurePosixPath('foo') == PurePosixPath('FOO')
   False
   >>> PureWindowsPath('foo') == PureWindowsPath('FOO')
   True
   >>> PureWindowsPath('FOO') in { PureWindowsPath('foo') }
   True
   >>> PureWindowsPath('C:') < PureWindowsPath('d:')
   True

Caminhos de um sabor diferente são comparados de forma desigual e não
podem ser ordenados:

   >>> PureWindowsPath('foo') == PurePosixPath('foo')
   False
   >>> PureWindowsPath('foo') < PurePosixPath('foo')
   Traceback (most recent call last):
     File "<stdin>", line 1, in <module>
   TypeError: '<' not supported between instances of 'PureWindowsPath' and 'PurePosixPath'


Operadores
----------

O operador barra ajuda a criar caminhos filhos, como "os.path.join()".
Se o argumento for um caminho absoluto, o caminho anterior será
ignorado. No Windows, a unidade não é redefinida quando o argumento é
um caminho relativo enraizado (por exemplo, "r'\foo'"):

   >>> p = PurePath('/etc')
   >>> p
   PurePosixPath('/etc')
   >>> p / 'init.d' / 'apache2'
   PurePosixPath('/etc/init.d/apache2')
   >>> q = PurePath('bin')
   >>> '/usr' / q
   PurePosixPath('/usr/bin')
   >>> p / '/an_absolute_path'
   PurePosixPath('/an_absolute_path')
   >>> PureWindowsPath('c:/Windows', '/Program Files')
   PureWindowsPath('c:/Program Files')

Um objeto de caminho pode ser usado em qualquer lugar em que um objeto
implementando "os.PathLike" seja aceito:

   >>> import os
   >>> p = PurePath('/etc')
   >>> os.fspath(p)
   '/etc'

A representação de string de um caminho é o próprio caminho do sistema
de arquivos bruto (na forma nativa, por exemplo, com contrabarras no
Windows), que você pode passar para qualquer função usando um caminho
de arquivo como uma string:

   >>> p = PurePath('/etc')
   >>> str(p)
   '/etc'
   >>> p = PureWindowsPath('c:/Program Files')
   >>> str(p)
   'c:\\Program Files'

Da mesma forma, chamar "bytes" em um caminho fornece o caminho do
sistema de arquivos bruto como um objeto bytes, codificado por
"os.fsencode()":

   >>> bytes(p)
   b'/etc'

Nota:

  A chamada de "bytes" só é recomendada no Unix. No Windows, a forma
  Unicode é a representação canônica dos caminhos do sistema de
  arquivos.


Acessando partes individuais
----------------------------

Para acessar as "partes" individuais (componentes) de um caminho, use
a seguinte propriedade:

PurePath.parts

   Uma tupla que dá acesso aos vários componentes do caminho:

      >>> p = PurePath('/usr/bin/python3')
      >>> p.parts
      ('/', 'usr', 'bin', 'python3')

      >>> p = PureWindowsPath('c:/Program Files/PSF')
      >>> p.parts
      ('c:\\', 'Program Files', 'PSF')

   (observe como a unidade e a raiz local são reagrupadas em uma única
   parte)


Métodos e propriedades
----------------------

Caminhos puros fornecem os seguintes métodos e propriedades:

PurePath.parser

   The implementation of the "os.path" module used for low-level path
   parsing and joining: either "posixpath" or "ntpath".

   Adicionado na versão 3.13.

PurePath.drive

   Uma string que representa a letra ou nome da unidade, se houver:

      >>> PureWindowsPath('c:/Program Files/').drive
      'c:'
      >>> PureWindowsPath('/Program Files/').drive
      ''
      >>> PurePosixPath('/etc').drive
      ''

   Os compartilhamentos UNC também são considerados unidades:

      >>> PureWindowsPath('//host/share/foo.txt').drive
      '\\\\host\\share'

PurePath.root

   Uma string que representa a raiz (local ou global), se houver:

      >>> PureWindowsPath('c:/Program Files/').root
      '\\'
      >>> PureWindowsPath('c:Program Files/').root
      ''
      >>> PurePosixPath('/etc').root
      '/'

   Os compartilhamentos UNC sempre têm uma raiz:

      >>> PureWindowsPath('//host/share').root
      '\\'

   Se o caminho começa com mais de duas barras sucessivas,
   "PurePosixPath" as recolhe:

      >>> PurePosixPath('//etc').root
      '//'
      >>> PurePosixPath('///etc').root
      '/'
      >>> PurePosixPath('////etc').root
      '/'

   Nota:

     Este comportamento está em conformidade com o parágrafo 4.11
     Pathname Resolution do *The Open Group Base Specifications Issue
     6*:*"Um nome de caminho que começa com duas barras sucessivas
     pode ser interpretado de maneira definida pela implementação,
     embora mais de duas barras iniciais devam ser tratadas como uma
     única barra."*

PurePath.anchor

   A concatenação da unidade e da raiz:

      >>> PureWindowsPath('c:/Program Files/').anchor
      'c:\\'
      >>> PureWindowsPath('c:Program Files/').anchor
      'c:'
      >>> PurePosixPath('/etc').anchor
      '/'
      >>> PureWindowsPath('//host/share').anchor
      '\\\\host\\share\\'

PurePath.parents

   Uma sequência imutável que fornece acesso aos ancestrais lógicos do
   caminho:

      >>> p = PureWindowsPath('c:/foo/bar/setup.py')
      >>> p.parents[0]
      PureWindowsPath('c:/foo/bar')
      >>> p.parents[1]
      PureWindowsPath('c:/foo')
      >>> p.parents[2]
      PureWindowsPath('c:/')

   Alterado na versão 3.10: A sequência pai agora tem suporte *fatias*
   e valores de índice negativos.

PurePath.parent

   O pai lógico do caminho:

      >>> p = PurePosixPath('/a/b/c/d')
      >>> p.parent
      PurePosixPath('/a/b/c')

   Você não pode passar por uma âncora ou caminho vazio:

      >>> p = PurePosixPath('/')
      >>> p.parent
      PurePosixPath('/')
      >>> p = PurePosixPath('.')
      >>> p.parent
      PurePosixPath('.')

   Nota:

     Esta é uma operação puramente lexical, daí o seguinte
     comportamento:

        >>> p = PurePosixPath('foo/..')
        >>> p.parent
        PurePosixPath('foo')

     Se você deseja percorrer um caminho arbitrário do sistema de
     arquivos para cima, é recomendável primeiro chamar
     "Path.resolve()" para resolver os links simbólicos e eliminar os
     componentes "".."".

PurePath.name

   Uma string que representa o componente do caminho final, excluindo
   a unidade e a raiz, se houver:

      >>> PurePosixPath('my/library/setup.py').name
      'setup.py'

   Nomes de unidades UNC não são considerados::

      >>> PureWindowsPath('//some/share/setup.py').name
      'setup.py'
      >>> PureWindowsPath('//some/share').name
      ''

PurePath.suffix

   The last dot-separated portion of the final component, if any:

      >>> PurePosixPath('my/library/setup.py').suffix
      '.py'
      >>> PurePosixPath('my/library.tar.gz').suffix
      '.gz'
      >>> PurePosixPath('my/library').suffix
      ''

   This is commonly called the file extension.

PurePath.suffixes

   A list of the path's suffixes, often called file extensions:

      >>> PurePosixPath('my/library.tar.gar').suffixes
      ['.tar', '.gar']
      >>> PurePosixPath('my/library.tar.gz').suffixes
      ['.tar', '.gz']
      >>> PurePosixPath('my/library').suffixes
      []

PurePath.stem

   O componente final do caminho, sem seu sufixo:

      >>> PurePosixPath('my/library.tar.gz').stem
      'library.tar'
      >>> PurePosixPath('my/library.tar').stem
      'library'
      >>> PurePosixPath('my/library').stem
      'library'

PurePath.as_posix()

   Retorna uma representação de string do caminho com barras ("/"):

      >>> p = PureWindowsPath('c:\\windows')
      >>> str(p)
      'c:\\windows'
      >>> p.as_posix()
      'c:/windows'

PurePath.is_absolute()

   Retorna se o caminho é absoluto ou não. Um caminho é considerado
   absoluto se tiver uma raiz e (se o tipo permitir) uma unidade:

      >>> PurePosixPath('/a/b').is_absolute()
      True
      >>> PurePosixPath('a/b').is_absolute()
      False

      >>> PureWindowsPath('c:/a/b').is_absolute()
      True
      >>> PureWindowsPath('/a/b').is_absolute()
      False
      >>> PureWindowsPath('c:').is_absolute()
      False
      >>> PureWindowsPath('//some/share').is_absolute()
      True

PurePath.is_relative_to(other)

   Retorna se este caminho é ou não relativo a outro caminho,
   representado por *other*.

   >>> p = PurePath('/etc/passwd')
   >>> p.is_relative_to('/etc')
   True
   >>> p.is_relative_to('/usr')
   False

   This method is string-based; it neither accesses the filesystem nor
   treats "".."" segments specially. The following code is equivalent:

   >>> u = PurePath('/usr')
   >>> u == p or u in p.parents
   False

   Adicionado na versão 3.9.

   Descontinuado desde a versão 3.12, será removido na versão 3.14:
   Passing additional arguments is deprecated; if supplied, they are
   joined with *other*.

PurePath.is_reserved()

   Com "PureWindowsPath", retorna "True" se o caminho é considerado
   reservado no Windows, "False" caso contrário. Com "PurePosixPath",
   "False" é sempre retornado.

   Alterado na versão 3.13: Windows path names that contain a colon,
   or end with a dot or a space, are considered reserved. UNC paths
   may be reserved.

   Descontinuado desde a versão 3.13, será removido na versão 3.15:
   This method is deprecated; use "os.path.isreserved()" to detect
   reserved paths on Windows.

PurePath.joinpath(*pathsegments)

   Calling this method is equivalent to combining the path with each
   of the given *pathsegments* in turn:

      >>> PurePosixPath('/etc').joinpath('passwd')
      PurePosixPath('/etc/passwd')
      >>> PurePosixPath('/etc').joinpath(PurePosixPath('passwd'))
      PurePosixPath('/etc/passwd')
      >>> PurePosixPath('/etc').joinpath('init.d', 'apache2')
      PurePosixPath('/etc/init.d/apache2')
      >>> PureWindowsPath('c:').joinpath('/Program Files')
      PureWindowsPath('c:/Program Files')

PurePath.full_match(pattern, *, case_sensitive=None)

   Match this path against the provided glob-style pattern.  Return
   "True" if matching is successful, "False" otherwise.  For example:

      >>> PurePath('a/b.py').full_match('a/*.py')
      True
      >>> PurePath('a/b.py').full_match('*.py')
      False
      >>> PurePath('/a/b/c.py').full_match('/a/**')
      True
      >>> PurePath('/a/b/c.py').full_match('**/*.py')
      True

   Ver também: Pattern language documentation.

   Tal como acontece com outros métodos, a distinção entre maiúsculas
   e minúsculas segue os padrões da plataforma:

      >>> PurePosixPath('b.py').full_match('*.PY')
      False
      >>> PureWindowsPath('b.py').full_match('*.PY')
      True

   Set *case_sensitive* to "True" or "False" to override this
   behaviour.

   Adicionado na versão 3.13.

PurePath.match(pattern, *, case_sensitive=None)

   Match this path against the provided non-recursive glob-style
   pattern. Return "True" if matching is successful, "False"
   otherwise.

   This method is similar to "full_match()", but empty patterns aren't
   allowed ("ValueError" is raised), the recursive wildcard ""**""
   isn't supported (it acts like non-recursive ""*""), and if a
   relative pattern is provided, then matching is done from the right:

      >>> PurePath('a/b.py').match('*.py')
      True
      >>> PurePath('/a/b/c.py').match('b/*.py')
      True
      >>> PurePath('/a/b/c.py').match('a/*.py')
      False

   Alterado na versão 3.12: The *pattern* parameter accepts a *path-
   like object*.

   Alterado na versão 3.12: The *case_sensitive* parameter was added.

PurePath.relative_to(other, walk_up=False)

   Compute a version of this path relative to the path represented by
   *other*.  If it's impossible, "ValueError" is raised:

      >>> p = PurePosixPath('/etc/passwd')
      >>> p.relative_to('/')
      PurePosixPath('etc/passwd')
      >>> p.relative_to('/etc')
      PurePosixPath('passwd')
      >>> p.relative_to('/usr')
      Traceback (most recent call last):
        File "<stdin>", line 1, in <module>
        File "pathlib.py", line 941, in relative_to
          raise ValueError(error_message.format(str(self), str(formatted)))
      ValueError: '/etc/passwd' is not in the subpath of '/usr' OR one path is relative and the other is absolute.

   When *walk_up* is false (the default), the path must start with
   *other*. When the argument is true, ".." entries may be added to
   form the relative path. In all other cases, such as the paths
   referencing different drives, "ValueError" is raised.:

      >>> p.relative_to('/usr', walk_up=True)
      PurePosixPath('../etc/passwd')
      >>> p.relative_to('foo', walk_up=True)
      Traceback (most recent call last):
        File "<stdin>", line 1, in <module>
        File "pathlib.py", line 941, in relative_to
          raise ValueError(error_message.format(str(self), str(formatted)))
      ValueError: '/etc/passwd' is not on the same drive as 'foo' OR one path is relative and the other is absolute.

   Aviso:

     This function is part of "PurePath" and works with strings. It
     does not check or access the underlying file structure. This can
     impact the *walk_up* option as it assumes that no symlinks are
     present in the path; call "resolve()" first if necessary to
     resolve symlinks.

   Alterado na versão 3.12: The *walk_up* parameter was added (old
   behavior is the same as "walk_up=False").

   Descontinuado desde a versão 3.12, será removido na versão 3.14:
   Passing additional positional arguments is deprecated; if supplied,
   they are joined with *other*.

PurePath.with_name(name)

   Retorna um novo caminho com o "name" alterado. Se o caminho
   original não tiver um nome, ValueError é levantada:

      >>> p = PureWindowsPath('c:/Downloads/pathlib.tar.gz')
      >>> p.with_name('setup.py')
      PureWindowsPath('c:/Downloads/setup.py')
      >>> p = PureWindowsPath('c:/')
      >>> p.with_name('setup.py')
      Traceback (most recent call last):
        File "<stdin>", line 1, in <module>
        File "/home/antoine/cpython/default/Lib/pathlib.py", line 751, in with_name
          raise ValueError("%r has an empty name" % (self,))
      ValueError: PureWindowsPath('c:/') has an empty name

PurePath.with_stem(stem)

   Retorna um novo caminho com o "stem" alterado. Se o caminho
   original não tiver um nome, ValueError é levantada:

      >>> p = PureWindowsPath('c:/Downloads/draft.txt')
      >>> p.with_stem('final')
      PureWindowsPath('c:/Downloads/final.txt')
      >>> p = PureWindowsPath('c:/Downloads/pathlib.tar.gz')
      >>> p.with_stem('lib')
      PureWindowsPath('c:/Downloads/lib.gz')
      >>> p = PureWindowsPath('c:/')
      >>> p.with_stem('')
      Traceback (most recent call last):
        File "<stdin>", line 1, in <module>
        File "/home/antoine/cpython/default/Lib/pathlib.py", line 861, in with_stem
          return self.with_name(stem + self.suffix)
        File "/home/antoine/cpython/default/Lib/pathlib.py", line 851, in with_name
          raise ValueError("%r has an empty name" % (self,))
      ValueError: PureWindowsPath('c:/') has an empty name

   Adicionado na versão 3.9.

PurePath.with_suffix(suffix)

   Retorna um novo caminho com o "suffix" alterado. Se o caminho
   original não tiver um sufixo, o novo *suffixo* será anexado. Se o
   *suffix* for uma string vazia, o sufixo original será removido:

      >>> p = PureWindowsPath('c:/Downloads/pathlib.tar.gz')
      >>> p.with_suffix('.bz2')
      PureWindowsPath('c:/Downloads/pathlib.tar.bz2')
      >>> p = PureWindowsPath('README')
      >>> p.with_suffix('.txt')
      PureWindowsPath('README.txt')
      >>> p = PureWindowsPath('README.txt')
      >>> p.with_suffix('')
      PureWindowsPath('README')

PurePath.with_segments(*pathsegments)

   Create a new path object of the same type by combining the given
   *pathsegments*. This method is called whenever a derivative path is
   created, such as from "parent" and "relative_to()". Subclasses may
   override this method to pass information to derivative paths, for
   example:

      from pathlib import PurePosixPath

      class MyPath(PurePosixPath):
          def __init__(self, *pathsegments, session_id):
              super().__init__(*pathsegments)
              self.session_id = session_id

          def with_segments(self, *pathsegments):
              return type(self)(*pathsegments, session_id=self.session_id)

      etc = MyPath('/etc', session_id=42)
      hosts = etc / 'hosts'
      print(hosts.session_id)  # 42

   Adicionado na versão 3.12.


Caminhos concretos
==================

Caminhos concretos são subclasses das classes de caminho puro. Além
das operações fornecidas por este último, eles também fornecem métodos
para fazer chamadas de sistema em objetos de caminho. Existem três
maneiras de instanciar caminhos concretos:

class pathlib.Path(*pathsegments)

   Uma subclasse de "PurePath", esta classe representa caminhos
   concretos do tipo de caminho do sistema (instanciando-o cria uma
   "PosixPath" ou uma "WindowsPath"):

      >>> Path('setup.py')
      PosixPath('setup.py')

   *pathsegments* é especificado de forma similar para "PurePath".

class pathlib.PosixPath(*pathsegments)

   Uma subclasse de "Path" e "PurePosixPath", esta classe representa
   caminhos concretos de sistemas de arquivos não Windows:

      >>> PosixPath('/etc')
      PosixPath('/etc')

   *pathsegments* é especificado de forma similar para "PurePath".

   Alterado na versão 3.13: Raises "UnsupportedOperation" on Windows.
   In previous versions, "NotImplementedError" was raised instead.

class pathlib.WindowsPath(*pathsegments)

   Uma subclasse de "Path" e "PureWindowsPath", esta classe representa
   caminhos concretos de sistemas de arquivos do Windows:

      >>> WindowsPath('c:/Program Files/')
      WindowsPath('c:/Program Files')

   *pathsegments* é especificado de forma similar para "PurePath".

   Alterado na versão 3.13: Raises "UnsupportedOperation" on non-
   Windows platforms. In previous versions, "NotImplementedError" was
   raised instead.

Você só pode instanciar o tipo de classe que corresponde ao seu
sistema (permitir chamadas de sistema em tipos de caminho não
compatíveis pode levar a bugs ou falhas em sua aplicação):

   >>> import os
   >>> os.name
   'posix'
   >>> Path('setup.py')
   PosixPath('setup.py')
   >>> PosixPath('setup.py')
   PosixPath('setup.py')
   >>> WindowsPath('setup.py')
   Traceback (most recent call last):
     File "<stdin>", line 1, in <module>
     File "pathlib.py", line 798, in __new__
       % (cls.__name__,))
   UnsupportedOperation: cannot instantiate 'WindowsPath' on your system

Some concrete path methods can raise an "OSError" if a system call
fails (for example because the path doesn't exist).


Parsing and generating URIs
---------------------------

Concrete path objects can be created from, and represented as, 'file'
URIs conforming to **RFC 8089**.

Nota:

  File URIs are not portable across machines with different filesystem
  encodings.

classmethod Path.from_uri(uri)

   Return a new path object from parsing a 'file' URI. For example:

      >>> p = Path.from_uri('file:///etc/hosts')
      PosixPath('/etc/hosts')

   On Windows, DOS device and UNC paths may be parsed from URIs:

      >>> p = Path.from_uri('file:///c:/windows')
      WindowsPath('c:/windows')
      >>> p = Path.from_uri('file://server/share')
      WindowsPath('//server/share')

   Several variant forms are supported:

      >>> p = Path.from_uri('file:////server/share')
      WindowsPath('//server/share')
      >>> p = Path.from_uri('file://///server/share')
      WindowsPath('//server/share')
      >>> p = Path.from_uri('file:c:/windows')
      WindowsPath('c:/windows')
      >>> p = Path.from_uri('file:/c|/windows')
      WindowsPath('c:/windows')

   "ValueError" is raised if the URI does not start with "file:", or
   the parsed path isn't absolute.

   Adicionado na versão 3.13.

Path.as_uri()

   Represent the path as a 'file' URI.  "ValueError" is raised if the
   path isn't absolute.

      >>> p = PosixPath('/etc/passwd')
      >>> p.as_uri()
      'file:///etc/passwd'
      >>> p = WindowsPath('c:/Windows')
      >>> p.as_uri()
      'file:///c:/Windows'

   For historical reasons, this method is also available from
   "PurePath" objects. However, its use of "os.fsencode()" makes it
   strictly impure.


Expanding and resolving paths
-----------------------------

classmethod Path.home()

   Retorna um novo objeto de caminho representando o diretório pessoal
   do usuário (conforme retornado por "os.path.expanduser()" com a
   construção "~"). Se o diretório pessoal não puder ser resolvido,
   "RuntimeError" é levantada.

      >>> Path.home()
      PosixPath('/home/antoine')

   Adicionado na versão 3.5.

Path.expanduser()

   Retorna um novo caminho com as construções "~" e "~user"
   expandidas,  como retornado por "os.path.expanduser()". Se um
   diretóriopessoal não puder ser resolvido, "RuntimeError" é
   levantada.

      >>> p = PosixPath('~/films/Monty Python')
      >>> p.expanduser()
      PosixPath('/home/eric/films/Monty Python')

   Adicionado na versão 3.5.

classmethod Path.cwd()

   Retorna um novo objeto de caminho que representa o diretório atual
   (conforme retornado por "os.getcwd()"):

      >>> Path.cwd()
      PosixPath('/home/antoine/pathlib')

Path.absolute()

   Torna o caminho absoluto, sem normalização ou resolução de links
   simbólicos. Retorna um novo objeto de caminho:

      >>> p = Path('tests')
      >>> p
      PosixPath('tests')
      >>> p.absolute()
      PosixPath('/home/antoine/pathlib/tests')

Path.resolve(strict=False)

   Faça o caminho absoluto, resolvendo quaisquer links simbólicos. Um
   novo objeto de caminho é retornado:

      >>> p = Path()
      >>> p
      PosixPath('.')
      >>> p.resolve()
      PosixPath('/home/antoine/pathlib')

   Componentes "".."" também são eliminados (este é o único método
   para fazer isso):

      >>> p = Path('docs/../setup.py')
      >>> p.resolve()
      PosixPath('/home/antoine/pathlib/setup.py')

   If a path doesn't exist or a symlink loop is encountered, and
   *strict* is "True", "OSError" is raised.  If *strict* is "False",
   the path is resolved as far as possible and any remainder is
   appended without checking whether it exists.

   Alterado na versão 3.6: The *strict* parameter was added (pre-3.6
   behavior is strict).

   Alterado na versão 3.13: Symlink loops are treated like other
   errors: "OSError" is raised in strict mode, and no exception is
   raised in non-strict mode. In previous versions, "RuntimeError" is
   raised no matter the value of *strict*.

Path.readlink()

   Retorna o caminho para o qual o link simbólico aponta (conforme
   retornado por "os.readlink()"):

      >>> p = Path('mylink')
      >>> p.symlink_to('setup.py')
      >>> p.readlink()
      PosixPath('setup.py')

   Adicionado na versão 3.9.

   Alterado na versão 3.13: Raises "UnsupportedOperation" if
   "os.readlink()" is not available. In previous versions,
   "NotImplementedError" was raised.


Querying file type and status
-----------------------------

Alterado na versão 3.8: "exists()", "is_dir()", "is_file()",
"is_mount()", "is_symlink()", "is_block_device()", "is_char_device()",
"is_fifo()", "is_socket()" agora retornam "False" em vez de levantar
uma exceção para caminhos que contêm caracteres não representáveis no
nível do sistema operacional.

Path.stat(*, follow_symlinks=True)

   Retorna um objeto "os.stat_result" contendo informações sobre este
   caminho, como "os.stat()". O resultado é consultado em cada chamada
   para este método.

   Este método normalmente segue links simbólicos; para obter estado
   de um link simbólico, adicione o argumento "follow_symlinks=False",
   ou use "lstat()".

      >>> p = Path('setup.py')
      >>> p.stat().st_size
      956
      >>> p.stat().st_mtime
      1327883547.852554

   Alterado na versão 3.10: O parâmetro *follow_symlinks* foi
   adicionado.

Path.lstat()

   Como "Path.stat()", mas, se o caminho apontar para um link
   simbólico, retorna as informações do link simbólico ao invés de seu
   alvo.

Path.exists(*, follow_symlinks=True)

   Return "True" if the path points to an existing file or directory.

   This method normally follows symlinks; to check if a symlink
   exists, add the argument "follow_symlinks=False".

      >>> Path('.').exists()
      True
      >>> Path('setup.py').exists()
      True
      >>> Path('/etc').exists()
      True
      >>> Path('nonexistentfile').exists()
      False

   Alterado na versão 3.12: O parâmetro *follow_symlinks* foi
   adicionado.

Path.is_file(*, follow_symlinks=True)

   Return "True" if the path points to a regular file, "False" if it
   points to another kind of file.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

   This method normally follows symlinks; to exclude symlinks, add the
   argument "follow_symlinks=False".

   Alterado na versão 3.13: O parâmetro *follow_symlinks* foi
   adicionado.

Path.is_dir(*, follow_symlinks=True)

   Return "True" if the path points to a directory, "False" if it
   points to another kind of file.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

   This method normally follows symlinks; to exclude symlinks to
   directories, add the argument "follow_symlinks=False".

   Alterado na versão 3.13: O parâmetro *follow_symlinks* foi
   adicionado.

Path.is_symlink()

   Retorna "True" se o caminho apontar para um link simbólico, "False"
   caso contrário.

   "False" também é retornado se o caminho não existir; outros erros
   (como erros de permissão) são propagados.

Path.is_junction()

   Return "True" if the path points to a junction, and "False" for any
   other type of file. Currently only Windows supports junctions.

   Adicionado na versão 3.12.

Path.is_mount()

   Return "True" if the path is a *mount point*: a point in a file
   system where a different file system has been mounted.  On POSIX,
   the function checks whether *path*'s parent, "path/..", is on a
   different device than *path*, or whether "path/.." and *path* point
   to the same i-node on the same device --- this should detect mount
   points for all Unix and POSIX variants.  On Windows, a mount point
   is considered to be a drive letter root (e.g. "c:\"), a UNC share
   (e.g. "\\server\share"), or a mounted filesystem directory.

   Adicionado na versão 3.7.

   Alterado na versão 3.12: Suporte ao Windows foi adicionado.

Path.is_socket()

   Retorna "True" se o caminho apontar para um soquete Unix (ou um
   link simbólico apontando para um soquete Unix), "False" se apontar
   para outro tipo de arquivo.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

Path.is_fifo()

   Retorna "True" se o caminho apontar para um FIFO (ou um link
   simbólico apontando para um FIFO), "False" se apontar para outro
   tipo de arquivo.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

Path.is_block_device()

   Retorna "True" se o caminho apontar para um dispositivo de bloco
   (ou um link simbólico apontando para um dispositivo de bloco),
   "False" se apontar para outro tipo de arquivo.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

Path.is_char_device()

   Retorna "True" se o caminho apontar para um dispositivo de
   caractere (ou um link simbólico apontando para um dispositivo de
   caractere), "False" se apontar para outro tipo de arquivo.

   "False" também é retornado se o caminho não existir ou se for um
   link simbólico quebrado; outros erros (como erros de permissão) são
   propagados.

Path.samefile(other_path)

   Retorna se este path apontar para o mesmo arquivo como
   *other_path*, que pode ser um objeto PATH ou uma String. A
   semântica é semelhante a função "os.path.samefile()" e a função
   "os.path.samestat()".

   Um "OSError" poderá ser levantado caso algum arquivo não puder ser
   acessado por alguma razão.

      >>> p = Path('spam')
      >>> q = Path('eggs')
      >>> p.samefile(q)
      False
      >>> p.samefile('spam')
      True

   Adicionado na versão 3.5.


Reading and writing files
-------------------------

Path.open(mode='r', buffering=-1, encoding=None, errors=None, newline=None)

   Abre o arquivo apontado pelo caminho, como a função embutida
   "open()" faz:

      >>> p = Path('setup.py')
      >>> with p.open() as f:
      ...     f.readline()
      ...
      '#!/usr/bin/env python3\n'

Path.read_text(encoding=None, errors=None, newline=None)

   Retorna o conteúdo decodificado do arquivo apontado como uma
   string:

      >>> p = Path('my_text_file')
      >>> p.write_text('Text file contents')
      18
      >>> p.read_text()
      'Text file contents'

   O arquivo é aberto e, então, fechado. Os parâmetros opcionais têm o
   mesmo significado que em "open()".

   Adicionado na versão 3.5.

   Alterado na versão 3.13: O parâmetro *newline* foi adicionado.

Path.read_bytes()

   Retorna o conteúdo binário do arquivo apontado como um objeto
   bytes:

      >>> p = Path('my_binary_file')
      >>> p.write_bytes(b'Binary file contents')
      20
      >>> p.read_bytes()
      b'Binary file contents'

   Adicionado na versão 3.5.

Path.write_text(data, encoding=None, errors=None, newline=None)

   Abre o arquivo apontado no modo de texto, escreve *data* e fecha o
   arquivo:

      >>> p = Path('my_text_file')
      >>> p.write_text('Text file contents')
      18
      >>> p.read_text()
      'Text file contents'

   Um arquivo existente com o mesmo nome é sobrescrito. Os parâmetros
   opcionais têm o mesmo significado que em "open()".

   Adicionado na versão 3.5.

   Alterado na versão 3.10: O parâmetro *newline* foi adicionado.

Path.write_bytes(data)

   Abre o arquivo apontado no modo bytes, escreve *dados* e fecha o
   arquivo:

      >>> p = Path('my_binary_file')
      >>> p.write_bytes(b'Binary file contents')
      20
      >>> p.read_bytes()
      b'Binary file contents'

   Um arquivo existente de mesmo nome será substituído.

   Adicionado na versão 3.5.


Reading directories
-------------------

Path.iterdir()

   Quando o caminho aponta para um diretório, produz objetos caminho
   do conteúdo do diretório:

      >>> p = Path('docs')
      >>> for child in p.iterdir(): child
      ...
      PosixPath('docs/conf.py')
      PosixPath('docs/_templates')
      PosixPath('docs/make.bat')
      PosixPath('docs/index.rst')
      PosixPath('docs/_build')
      PosixPath('docs/_static')
      PosixPath('docs/Makefile')

   The children are yielded in arbitrary order, and the special
   entries "'.'" and "'..'" are not included.  If a file is removed
   from or added to the directory after creating the iterator, it is
   unspecified whether a path object for that file is included.

   If the path is not a directory or otherwise inaccessible, "OSError"
   is raised.

Path.glob(pattern, *, case_sensitive=None, recurse_symlinks=False)

   Faz o glob do *pattern* relativo fornecido no diretório
   representado por este caminho, produzindo todos os arquivos
   correspondentes (de qualquer tipo):

      >>> sorted(Path('.').glob('*.py'))
      [PosixPath('pathlib.py'), PosixPath('setup.py'), PosixPath('test_pathlib.py')]
      >>> sorted(Path('.').glob('*/*.py'))
      [PosixPath('docs/conf.py')]
      >>> sorted(Path('.').glob('**/*.py'))
      [PosixPath('build/lib/pathlib.py'),
       PosixPath('docs/conf.py'),
       PosixPath('pathlib.py'),
       PosixPath('setup.py'),
       PosixPath('test_pathlib.py')]

   Ver também: Pattern language documentation.

   By default, or when the *case_sensitive* keyword-only argument is
   set to "None", this method matches paths using platform-specific
   casing rules: typically, case-sensitive on POSIX, and case-
   insensitive on Windows. Set *case_sensitive* to "True" or "False"
   to override this behaviour.

   By default, or when the *recurse_symlinks* keyword-only argument is
   set to "False", this method follows symlinks except when expanding
   ""**"" wildcards. Set *recurse_symlinks* to "True" to always follow
   symlinks.

   Levanta um evento de auditoria "pathlib.Path.glob" com argumentos
   "self", "pattern".

   Alterado na versão 3.12: The *case_sensitive* parameter was added.

   Alterado na versão 3.13: The *recurse_symlinks* parameter was
   added.

   Alterado na versão 3.13: The *pattern* parameter accepts a *path-
   like object*.

   Alterado na versão 3.13: Any "OSError" exceptions raised from
   scanning the filesystem are suppressed. In previous versions, such
   exceptions are suppressed in many cases, but not all.

Path.rglob(pattern, *, case_sensitive=None, recurse_symlinks=False)

   Glob the given relative *pattern* recursively.  This is like
   calling "Path.glob()" with ""**/"" added in front of the *pattern*.

   Ver também: Pattern language and "Path.glob()" documentation.

   Levanta um evento de auditoria "pathlib.Path.rglob" com argumentos
   "self", "pattern".

   Alterado na versão 3.12: The *case_sensitive* parameter was added.

   Alterado na versão 3.13: The *recurse_symlinks* parameter was
   added.

   Alterado na versão 3.13: The *pattern* parameter accepts a *path-
   like object*.

Path.walk(top_down=True, on_error=None, follow_symlinks=False)

   Generate the file names in a directory tree by walking the tree
   either top-down or bottom-up.

   For each directory in the directory tree rooted at *self*
   (including *self* but excluding '.' and '..'), the method yields a
   3-tuple of "(dirpath, dirnames, filenames)".

   *dirpath* is a "Path" to the directory currently being walked,
   *dirnames* is a list of strings for the names of subdirectories in
   *dirpath* (excluding "'.'" and "'..'"), and *filenames* is a list
   of strings for the names of the non-directory files in *dirpath*.
   To get a full path (which begins with *self*) to a file or
   directory in *dirpath*, do "dirpath / name". Whether or not the
   lists are sorted is file system-dependent.

   If the optional argument *top_down* is true (which is the default),
   the triple for a directory is generated before the triples for any
   of its subdirectories (directories are walked top-down).  If
   *top_down* is false, the triple for a directory is generated after
   the triples for all of its subdirectories (directories are walked
   bottom-up). No matter the value of *top_down*, the list of
   subdirectories is retrieved before the triples for the directory
   and its subdirectories are walked.

   When *top_down* is true, the caller can modify the *dirnames* list
   in-place (for example, using "del" or slice assignment), and
   "Path.walk()" will only recurse into the subdirectories whose names
   remain in *dirnames*. This can be used to prune the search, or to
   impose a specific order of visiting, or even to inform
   "Path.walk()" about directories the caller creates or renames
   before it resumes "Path.walk()" again. Modifying *dirnames* when
   *top_down* is false has no effect on the behavior of "Path.walk()"
   since the directories in *dirnames* have already been generated by
   the time *dirnames* is yielded to the caller.

   By default, errors from "os.scandir()" are ignored.  If the
   optional argument *on_error* is specified, it should be a callable;
   it will be called with one argument, an "OSError" instance. The
   callable can handle the error to continue the walk or re-raise it
   to stop the walk. Note that the filename is available as the
   "filename" attribute of the exception object.

   By default, "Path.walk()" does not follow symbolic links, and
   instead adds them to the *filenames* list. Set *follow_symlinks* to
   true to resolve symlinks and place them in *dirnames* and
   *filenames* as appropriate for their targets, and consequently
   visit directories pointed to by symlinks (where supported).

   Nota:

     Be aware that setting *follow_symlinks* to true can lead to
     infinite recursion if a link points to a parent directory of
     itself. "Path.walk()" does not keep track of the directories it
     has already visited.

   Nota:

     "Path.walk()" assumes the directories it walks are not modified
     during execution. For example, if a directory from *dirnames* has
     been replaced with a symlink and *follow_symlinks* is false,
     "Path.walk()" will still try to descend into it. To prevent such
     behavior, remove directories from *dirnames* as appropriate.

   Nota:

     Unlike "os.walk()", "Path.walk()" lists symlinks to directories
     in *filenames* if *follow_symlinks* is false.

   This example displays the number of bytes used by all files in each
   directory, while ignoring "__pycache__" directories:

      from pathlib import Path
      for root, dirs, files in Path("cpython/Lib/concurrent").walk(on_error=print):
        print(
            root,
            "consumes",
            sum((root / file).stat().st_size for file in files),
            "bytes in",
            len(files),
            "non-directory files"
        )
        if '__pycache__' in dirs:
              dirs.remove('__pycache__')

   This next example is a simple implementation of "shutil.rmtree()".
   Walking the tree bottom-up is essential as "rmdir()" doesn't allow
   deleting a directory before it is empty:

      # Delete everything reachable from the directory "top".
      # CAUTION:  This is dangerous! For example, if top == Path('/'),
      # it could delete all of your files.
      for root, dirs, files in top.walk(top_down=False):
          for name in files:
              (root / name).unlink()
          for name in dirs:
              (root / name).rmdir()

   Adicionado na versão 3.12.


Creating files and directories
------------------------------

Path.touch(mode=0o666, exist_ok=True)

   Create a file at this given path.  If *mode* is given, it is
   combined with the process's "umask" value to determine the file
   mode and access flags.  If the file already exists, the function
   succeeds when *exist_ok* is true (and its modification time is
   updated to the current time), otherwise "FileExistsError" is
   raised.

   Ver também:

     The "open()", "write_text()" and "write_bytes()" methods are
     often used to create files.

Path.mkdir(mode=0o777, parents=False, exist_ok=False)

   Create a new directory at this given path.  If *mode* is given, it
   is combined with the process's "umask" value to determine the file
   mode and access flags.  If the path already exists,
   "FileExistsError" is raised.

   Se *parents* for verdadeiro, quaisquer pais ausentes neste caminho
   serão criados conforme necessário; eles são criados com as
   permissões padrão sem levar o *mode* em consideração (imitando o
   comando POSIX "mkdir -p").

   Se *parents* for falso (o padrão), um pai ausente levanta
   "FileNotFoundError".

   Se *exist_ok* for falso (o padrão), "FileExistsError" será
   levantada se o diretório alvo já existir.

   If *exist_ok* is true, "FileExistsError" will not be raised unless
   the given path already exists in the file system and is not a
   directory (same behavior as the POSIX "mkdir -p" command).

   Alterado na versão 3.5: O parâmetro *exist_ok* foi adicionado.

Path.symlink_to(target, target_is_directory=False)

   Make this path a symbolic link pointing to *target*.

   On Windows, a symlink represents either a file or a directory, and
   does not morph to the target dynamically.  If the target is
   present, the type of the symlink will be created to match.
   Otherwise, the symlink will be created as a directory if
   *target_is_directory* is true or a file symlink (the default)
   otherwise.  On non-Windows platforms, *target_is_directory* is
   ignored.

      >>> p = Path('mylink')
      >>> p.symlink_to('setup.py')
      >>> p.resolve()
      PosixPath('/home/antoine/pathlib/setup.py')
      >>> p.stat().st_size
      956
      >>> p.lstat().st_size
      8

   Nota:

     A ordem dos argumentos (link, target) é o inverso da função
     "os.symlink()"'s.

   Alterado na versão 3.13: Raises "UnsupportedOperation" if
   "os.symlink()" is not available. In previous versions,
   "NotImplementedError" was raised.

Path.hardlink_to(target)

   Faz deste caminho um link físico para o mesmo arquivo que *target*.

   Nota:

     A ordem dos argumentos (link, target) é o inverso da função
     "os.link()"'s.

   Adicionado na versão 3.10.

   Alterado na versão 3.13: Raises "UnsupportedOperation" if
   "os.link()" is not available. In previous versions,
   "NotImplementedError" was raised.


Renaming and deleting
---------------------

Path.rename(target)

   Rename this file or directory to the given *target*, and return a
   new "Path" instance pointing to *target*.  On Unix, if *target*
   exists and is a file, it will be replaced silently if the user has
   permission. On Windows, if *target* exists, "FileExistsError" will
   be raised. *target* can be either a string or another path object:

      >>> p = Path('foo')
      >>> p.open('w').write('some text')
      9
      >>> target = Path('bar')
      >>> p.rename(target)
      PosixPath('bar')
      >>> target.open().read()
      'some text'

   The target path may be absolute or relative. Relative paths are
   interpreted relative to the current working directory, *not* the
   directory of the "Path" object.

   Está implementada em termos de "os.rename()" e fornece as mesmas
   garantias.

   Alterado na versão 3.8: Added return value, return the new "Path"
   instance.

Path.replace(target)

   Rename this file or directory to the given *target*, and return a
   new "Path" instance pointing to *target*.  If *target* points to an
   existing file or empty directory, it will be unconditionally
   replaced.

   The target path may be absolute or relative. Relative paths are
   interpreted relative to the current working directory, *not* the
   directory of the "Path" object.

   Alterado na versão 3.8: Added return value, return the new "Path"
   instance.

Path.unlink(missing_ok=False)

   Remova esse arquivo ou link simbólico. Caso o caminho aponte para
   um diretório, use a função "Path.rmdir()" em vez disso.

   Se *missing_ok* for falso (o padrão), "FileNotFoundError" é
   levantada se o caminho não existir.

   Se *missing_ok* for verdadeiro, exceções de "FileNotFoundError"
   serão ignoradas (mesmo comportamento que o comando POSIX "rm -f").

   Alterado na versão 3.8: O parâmetro *missing_ok* foi adicionado.

Path.rmdir()

   Remove este diretório. O diretório deve estar vazio.


Permissions and ownership
-------------------------

Path.owner(*, follow_symlinks=True)

   Return the name of the user owning the file. "KeyError" is raised
   if the file's user identifier (UID) isn't found in the system
   database.

   This method normally follows symlinks; to get the owner of the
   symlink, add the argument "follow_symlinks=False".

   Alterado na versão 3.13: Raises "UnsupportedOperation" if the "pwd"
   module is not available. In earlier versions, "NotImplementedError"
   was raised.

   Alterado na versão 3.13: O parâmetro *follow_symlinks* foi
   adicionado.

Path.group(*, follow_symlinks=True)

   Return the name of the group owning the file. "KeyError" is raised
   if the file's group identifier (GID) isn't found in the system
   database.

   This method normally follows symlinks; to get the group of the
   symlink, add the argument "follow_symlinks=False".

   Alterado na versão 3.13: Raises "UnsupportedOperation" if the "grp"
   module is not available. In earlier versions, "NotImplementedError"
   was raised.

   Alterado na versão 3.13: O parâmetro *follow_symlinks* foi
   adicionado.

Path.chmod(mode, *, follow_symlinks=True)

   Altera o modo de arquivo e as permissões, como "os.chmod()".

   This method normally follows symlinks. Some Unix flavours support
   changing permissions on the symlink itself; on these platforms you
   may add the argument "follow_symlinks=False", or use "lchmod()".

      >>> p = Path('setup.py')
      >>> p.stat().st_mode
      33277
      >>> p.chmod(0o444)
      >>> p.stat().st_mode
      33060

   Alterado na versão 3.10: O parâmetro *follow_symlinks* foi
   adicionado.

Path.lchmod(mode)

   Como "Path.chmod()", mas, se o caminho apontar para um link
   simbólico, o modo do link simbólico é alterado ao invés de seu
   alvo.


Pattern language
================

The following wildcards are supported in patterns for "full_match()",
"glob()" and "rglob()":

"**" (entire segment)
   Matches any number of file or directory segments, including zero.

"*" (entire segment)
   Matches one file or directory segment.

"*" (part of a segment)
   Matches any number of non-separator characters, including zero.

"?"
   Matches one non-separator character.

"[seq]"
   Matches one character in *seq*.

"[!seq]"
   Matches one character not in *seq*.

For a literal match, wrap the meta-characters in brackets. For
example, ""[?]"" matches the character ""?"".

The ""**"" wildcard enables recursive globbing. A few examples:

+---------------------------+-----------------------------------------------------------------------+
| Padrão                    | Significado                                                           |
|===========================|=======================================================================|
| ""**/*""                  | Any path with at least one segment.                                   |
+---------------------------+-----------------------------------------------------------------------+
| ""**/*.py""               | Any path with a final segment ending "".py"".                         |
+---------------------------+-----------------------------------------------------------------------+
| ""assets/**""             | Any path starting with ""assets/"".                                   |
+---------------------------+-----------------------------------------------------------------------+
| ""assets/**/*""           | Any path starting with ""assets/"", excluding ""assets/"" itself.     |
+---------------------------+-----------------------------------------------------------------------+

Nota:

  Globbing with the ""**"" wildcard visits every directory in the
  tree. Large directory trees may take a long time to search.

Alterado na versão 3.13: Globbing with a pattern that ends with ""**""
returns both files and directories. In previous versions, only
directories were returned.

In "Path.glob()" and "rglob()", a trailing slash may be added to the
pattern to match only directories.

Alterado na versão 3.11: Globbing with a pattern that ends with a
pathname components separator ("sep" or "altsep") returns only
directories.


Comparison to the "glob" module
===============================

The patterns accepted and results generated by "Path.glob()" and
"Path.rglob()" differ slightly from those by the "glob" module:

1. Files beginning with a dot are not special in pathlib. This is like
   passing "include_hidden=True" to "glob.glob()".

2. ""**"" pattern components are always recursive in pathlib. This is
   like passing "recursive=True" to "glob.glob()".

3. ""**"" pattern components do not follow symlinks by default in
   pathlib. This behaviour has no equivalent in "glob.glob()", but you
   can pass "recurse_symlinks=True" to "Path.glob()" for compatible
   behaviour.

4. Like all "PurePath" and "Path" objects, the values returned from
   "Path.glob()" and "Path.rglob()" don't include trailing slashes.

5. The values returned from pathlib's "path.glob()" and "path.rglob()"
   include the *path* as a prefix, unlike the results of
   "glob.glob(root_dir=path)".

6. The values returned from pathlib's "path.glob()" and "path.rglob()"
   may include *path* itself, for example when globbing ""**"",
   whereas the results of "glob.glob(root_dir=path)" never include an
   empty string that would correspond to *path*.


Comparison to the "os" and "os.path" modules
============================================

pathlib implements path operations using "PurePath" and "Path"
objects, and so it's said to be *object-oriented*. On the other hand,
the "os" and "os.path" modules supply functions that work with low-
level "str" and "bytes" objects, which is a more *procedural*
approach. Some users consider the object-oriented style to be more
readable.

Many functions in "os" and "os.path" support "bytes" paths and paths
relative to directory descriptors. These features aren't available in
pathlib.

Python's "str" and "bytes" types, and portions of the "os" and
"os.path" modules, are written in C and are very speedy. pathlib is
written in pure Python and is often slower, but rarely slow enough to
matter.

pathlib's path normalization is slightly more opinionated and
consistent than "os.path". For example, whereas "os.path.abspath()"
eliminates "".."" segments from a path, which may change its meaning
if symlinks are involved, "Path.absolute()" preserves these segments
for greater safety.

pathlib's path normalization may render it unsuitable for some
applications:

1. pathlib normalizes "Path("my_folder/")" to "Path("my_folder")",
   which changes a path's meaning when supplied to various operating
   system APIs and command-line utilities. Specifically, the absence
   of a trailing separator may allow the path to be resolved as either
   a file or directory, rather than a directory only.

2. pathlib normalizes "Path("./my_program")" to "Path("my_program")",
   which changes a path's meaning when used as an executable search
   path, such as in a shell or when spawning a child process.
   Specifically, the absence of a separator in the path may force it
   to be looked up in "PATH" rather than the current directory.

As a consequence of these differences, pathlib is not a drop-in
replacement for "os.path".


Corresponding tools
-------------------

Abaixo está uma tabela mapeando várias funções "os" a sua
"PurePath"/"Path" equivalente.

+--------------------------------------+--------------------------------+
| "os" e "os.path"                     | "pathlib"                      |
|======================================|================================|
| "os.path.abspath()"                  | "Path.absolute()"              |
+--------------------------------------+--------------------------------+
| "os.path.realpath()"                 | "Path.resolve()"               |
+--------------------------------------+--------------------------------+
| "os.chmod()"                         | "Path.chmod()"                 |
+--------------------------------------+--------------------------------+
| "os.mkdir()"                         | "Path.mkdir()"                 |
+--------------------------------------+--------------------------------+
| "os.makedirs()"                      | "Path.mkdir()"                 |
+--------------------------------------+--------------------------------+
| "os.rename()"                        | "Path.rename()"                |
+--------------------------------------+--------------------------------+
| "os.replace()"                       | "Path.replace()"               |
+--------------------------------------+--------------------------------+
| "os.rmdir()"                         | "Path.rmdir()"                 |
+--------------------------------------+--------------------------------+
| "os.remove()", "os.unlink()"         | "Path.unlink()"                |
+--------------------------------------+--------------------------------+
| "os.getcwd()"                        | "Path.cwd()"                   |
+--------------------------------------+--------------------------------+
| "os.path.exists()"                   | "Path.exists()"                |
+--------------------------------------+--------------------------------+
| "os.path.expanduser()"               | "Path.expanduser()" and        |
|                                      | "Path.home()"                  |
+--------------------------------------+--------------------------------+
| "os.listdir()"                       | "Path.iterdir()"               |
+--------------------------------------+--------------------------------+
| "os.walk()"                          | "Path.walk()"                  |
+--------------------------------------+--------------------------------+
| "os.path.isdir()"                    | "Path.is_dir()"                |
+--------------------------------------+--------------------------------+
| "os.path.isfile()"                   | "Path.is_file()"               |
+--------------------------------------+--------------------------------+
| "os.path.islink()"                   | "Path.is_symlink()"            |
+--------------------------------------+--------------------------------+
| "os.link()"                          | "Path.hardlink_to()"           |
+--------------------------------------+--------------------------------+
| "os.symlink()"                       | "Path.symlink_to()"            |
+--------------------------------------+--------------------------------+
| "os.readlink()"                      | "Path.readlink()"              |
+--------------------------------------+--------------------------------+
| "os.path.relpath()"                  | "PurePath.relative_to()"       |
+--------------------------------------+--------------------------------+
| "os.stat()"                          | "Path.stat()", "Path.owner()", |
|                                      | "Path.group()"                 |
+--------------------------------------+--------------------------------+
| "os.path.isabs()"                    | "PurePath.is_absolute()"       |
+--------------------------------------+--------------------------------+
| "os.path.join()"                     | "PurePath.joinpath()"          |
+--------------------------------------+--------------------------------+
| "os.path.basename()"                 | "PurePath.name"                |
+--------------------------------------+--------------------------------+
| "os.path.dirname()"                  | "PurePath.parent"              |
+--------------------------------------+--------------------------------+
| "os.path.samefile()"                 | "Path.samefile()"              |
+--------------------------------------+--------------------------------+
| "os.path.splitext()"                 | "PurePath.stem" e              |
|                                      | "PurePath.suffix"              |
+--------------------------------------+--------------------------------+
