"base64" --- Base16, Base32, Base64, Base85 Data Encodings
**********************************************************

**Kod źródłowy:** Lib/base64.py

======================================================================

This module provides functions for encoding binary data to printable
ASCII characters and decoding such encodings back to binary data. This
includes the encodings specified in **RFC 4648** (Base64, Base32 and
Base16), the Base85 encoding specified in PDF 2.0, and non-standard
variants of Base85 used elsewhere.

There are two interfaces provided by this module.  The modern
interface supports encoding *bytes-like objects* to ASCII "bytes", and
decoding *bytes-like objects* or strings containing ASCII to "bytes".
Both base-64 alphabets defined in **RFC 4648** (normal, and URL- and
filesystem-safe) are supported.

The legacy interface does not support decoding from strings, but it
does provide functions for encoding and decoding to and from *file
objects*.  It only supports the Base64 standard alphabet, and it adds
newlines every 76 characters as per **RFC 2045**.  Note that if you
are looking for **RFC 2045** support you probably want to be looking
at the "email" package instead.

Zmienione w wersji 3.3: ASCII-only Unicode strings are now accepted by
the decoding functions of the modern interface.

Zmienione w wersji 3.4: Any *bytes-like objects* are now accepted by
all encoding and decoding functions in this module.  Ascii85/Base85
support added.


RFC 4648 Encodings
==================

The **RFC 4648** encodings are suitable for encoding binary data so
that it can be safely sent by email, used as parts of URLs, or
included as part of an HTTP POST request.

base64.b64encode(s, altchars=None, *, padded=True, wrapcol=0)

   Encode the *bytes-like object* *s* using Base64 and return the
   encoded "bytes".

   Optional *altchars* must be a *bytes-like object* of length 2 which
   specifies an alternative alphabet for the "+" and "/" characters.
   This allows an application to e.g. generate URL or filesystem safe
   Base64 strings.  The default is "None", for which the standard
   Base64 alphabet is used.

   If *padded* is true (default), pad the encoded data with the '='
   character to a size multiple of 4. If *padded* is false, do not add
   the pad characters.

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not insert any newlines.

   Zmienione w wersji 3.15: Added the *padded* and *wrapcol*
   parameters.

base64.b64decode(s, altchars=None, validate=False, *, padded=True, canonical=False)
base64.b64decode(s, altchars=None, validate=True, *, ignorechars, padded=True, canonical=False)

   Decode the Base64 encoded *bytes-like object* or ASCII string *s*
   and return the decoded "bytes".

   Optional *altchars* must be a *bytes-like object* or ASCII string
   of length 2 which specifies the alternative alphabet used instead
   of the "+" and "/" characters.

   If *padded* is true, the last group of 4 base 64 alphabet
   characters must be padded with the '=' character. If *padded* is
   false, padding is neither required nor recognized: the '='
   character is not treated as padding but as a non-alphabet
   character, which means it is silently discarded when *validate* is
   false, or causes an "Error" when *validate* is true unless b'=' is
   included in *ignorechars*.

   A "binascii.Error" exception is raised if *s* is incorrectly
   padded.

   If *ignorechars* is specified, it should be a *bytes-like object*
   containing characters to ignore from the input when *validate* is
   true. If *ignorechars* contains the pad character "'='",  the pad
   characters presented before the end of the encoded data and the
   excess pad characters will be ignored. The default value of
   *validate* is "True" if *ignorechars* is specified, "False"
   otherwise.

   If *validate* is false, characters that are neither in the normal
   base-64 alphabet nor (if *ignorechars* is not specified) the
   alternative alphabet are discarded prior to the padding check, but
   the "+" and "/" characters keep their meaning if they are not in
   *altchars* (they will be discarded in future Python versions).

   If *validate* is true, these non-alphabet characters in the input
   result in a "binascii.Error".

   If *canonical* is true, non-zero padding bits are rejected. See
   "binascii.a2b_base64()" for details.

   For more information about the strict base64 check, see
   "binascii.a2b_base64()"

   Zmienione w wersji 3.15: Added the *canonical*, *ignorechars*, and
   *padded* parameters.

   Niezalecane od wersji 3.15: Accepting the "+" and "/" characters
   with an alternative alphabet is now deprecated.

base64.standard_b64encode(s)

   Encode *bytes-like object* *s* using the standard Base64 alphabet
   and return the encoded "bytes".

base64.standard_b64decode(s)

   Decode *bytes-like object* or ASCII string *s* using the standard
   Base64 alphabet and return the decoded "bytes".

base64.urlsafe_b64encode(s, *, padded=True)

   Encode *bytes-like object* *s* using the URL- and filesystem-safe
   alphabet, which substitutes "-" instead of "+" and "_" instead of
   "/" in the standard Base64 alphabet, and return the encoded
   "bytes".  The result can still contain "=" if *padded* is true
   (default).

   Zmienione w wersji 3.15: Added the *padded* parameter.

base64.urlsafe_b64decode(s, *, padded=False)

   Decode *bytes-like object* or ASCII string *s* using the URL- and
   filesystem-safe alphabet, which substitutes "-" instead of "+" and
   "_" instead of "/" in the standard Base64 alphabet, and return the
   decoded "bytes".

   Zmienione w wersji 3.15: Added the *padded* parameter. Padding of
   input is no longer required by default.

   Niezalecane od wersji 3.15: Accepting the "+" and "/" characters is
   now deprecated.

base64.b32encode(s, *, padded=True, wrapcol=0)

   Encode the *bytes-like object* *s* using Base32 and return the
   encoded "bytes".

   If *padded* is true (default), pad the encoded data with the '='
   character to a size multiple of 8. If *padded* is false, do not add
   the pad characters.

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not add any newlines.

   Zmienione w wersji 3.15: Added the *padded* and *wrapcol*
   parameters.

base64.b32decode(s, casefold=False, map01=None, *, padded=True, ignorechars=b'', canonical=False)

   Decode the Base32 encoded *bytes-like object* or ASCII string *s*
   and return the decoded "bytes".

   Optional *casefold* is a flag specifying whether a lowercase
   alphabet is acceptable as input.  For security purposes, the
   default is "False".

   **RFC 4648** allows for optional mapping of the digit 0 (zero) to
   the letter O (oh), and for optional mapping of the digit 1 (one) to
   either the letter I (eye) or letter L (el).  The optional argument
   *map01* when not "None", specifies which letter the digit 1 should
   be mapped to (when *map01* is not "None", the digit 0 is always
   mapped to the letter O).  For security purposes the default is
   "None", so that 0 and 1 are not allowed in the input.

   If *padded* is true, the last group of 8 base 32 alphabet
   characters must be padded with the '=' character. If *padded* is
   false, padding is neither required nor recognized: the '='
   character is not treated as padding but as a non-alphabet
   character, which means it raises an "Error" unless b'=' is included
   in *ignorechars*.

   *ignorechars* should be a *bytes-like object* containing characters
   to ignore from the input.

   If *canonical* is true, non-zero padding bits are rejected. See
   "binascii.a2b_base32()" for details.

   A "binascii.Error" is raised if *s* is incorrectly padded or if
   there are non-alphabet characters present in the input.

   Zmienione w wersji 3.15: Added the *canonical*, *ignorechars*, and
   *padded* parameters.

base64.b32hexencode(s, *, padded=True, wrapcol=0)

   Similar to "b32encode()" but uses the Extended Hex Alphabet, as
   defined in **RFC 4648**.

    Dodane w wersji 3.10.

   Zmienione w wersji 3.15: Added the *padded* and *wrapcol*
   parameters.

base64.b32hexdecode(s, casefold=False, *, padded=True, ignorechars=b'', canonical=False)

   Similar to "b32decode()" but uses the Extended Hex Alphabet, as
   defined in **RFC 4648**.

   This version does not allow the digit 0 (zero) to the letter O (oh)
   and digit 1 (one) to either the letter I (eye) or letter L (el)
   mappings, all these characters are included in the Extended Hex
   Alphabet and are not interchangeable.

    Dodane w wersji 3.10.

   Zmienione w wersji 3.15: Added the *canonical*, *ignorechars*, and
   *padded* parameters.

base64.b16encode(s, *, wrapcol=0)

   Encode the *bytes-like object* *s* using Base16 and return the
   encoded "bytes".

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not add any newlines.

   Zmienione w wersji 3.15: Added the *wrapcol* parameter.

base64.b16decode(s, casefold=False, *, ignorechars=b'')

   Decode the Base16 encoded *bytes-like object* or ASCII string *s*
   and return the decoded "bytes".

   Optional *casefold* is a flag specifying whether a lowercase
   alphabet is acceptable as input.  For security purposes, the
   default is "False".

   *ignorechars* should be a *bytes-like object* containing characters
   to ignore from the input.

   A "binascii.Error" is raised if *s* is incorrectly padded or if
   there are non-alphabet characters present in the input.

   Zmienione w wersji 3.15: Added the *ignorechars* parameter.


Base85 Encodings
================

Base85 encoding is a family of algorithms which represent four bytes
using five ASCII characters.  Originally implemented in the Unix
"btoa(1)" utility, a version of it was later adopted by Adobe in the
PostScript language and is standardized in PDF 2.0 (ISO 32000-2). This
version, in both its "btoa" and PDF variants, is implemented by
"a85encode()".

A separate version, using a different output character set, was
defined as an April Fool's joke in **RFC 1924** but is now used by Git
and other software.  This version is implemented by "b85encode()".

Finally, a third version, using yet another output character set
designed for safe inclusion in programming language strings, is
defined by ZeroMQ and implemented here by "z85encode()".

The functions present in this module differ in how they handle the
following:

* Whether to include and expect enclosing "<~" and "~>" markers.

* Whether to fold the input into multiple lines.

* The set of ASCII characters used for encoding.

* Compact encodings of sequences of spaces and null bytes.

* The encoding of zero-padding bytes applied to the input.

Refer to the documentation of the individual functions for more
information.

base64.a85encode(b, *, foldspaces=False, wrapcol=0, pad=False, adobe=False)

   Encode the *bytes-like object* *b* using Ascii85 and return the
   encoded "bytes".

   *foldspaces* is an optional flag that uses the special short
   sequence 'y' instead of 4 consecutive spaces (ASCII 0x20) as
   supported by 'btoa'. This feature is not supported by the standard
   encoding used in PDF.

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not insert any newlines.

   *pad* controls whether zero-padding applied to the end of the input
   is fully retained in the output encoding, as done by "btoa",
   producing an exact multiple of 5 bytes of output. This is not part
   of the standard encoding used in PDF, as it does not preserve the
   length of the data.

   *adobe* controls whether the encoded byte sequence is framed with
   "<~" and "~>", as in a PostScript base-85 string literal.  Note
   that while ASCII85Decode streams in PDF documents *must* be
   terminated with "~>", they *must not* use a leading "<~".

    Dodane w wersji 3.4.

base64.a85decode(b, *, foldspaces=False, adobe=False, ignorechars=b' \t\n\r\x0b', canonical=False)

   Decode the Ascii85 encoded *bytes-like object* or ASCII string *b*
   and return the decoded "bytes".

   *foldspaces* is a flag that specifies whether the 'y' short
   sequence should be accepted as shorthand for 4 consecutive spaces
   (ASCII 0x20). This feature is not supported by the standard Ascii85
   encoding used in PDF and PostScript.

   *adobe* controls whether the "<~" and "~>" markers are present.
   While the leading "<~" is not required, the input must end with
   "~>", or a "ValueError" is raised.

   *ignorechars* should be a *bytes-like object* containing characters
   to ignore from the input. This should only contain whitespace
   characters, and by default contains all whitespace characters in
   ASCII.

   If *canonical* is true, non-canonical encodings are rejected. See
   "binascii.a2b_ascii85()" for details.

    Dodane w wersji 3.4.

   Zmienione w wersji 3.15: Added the *canonical* parameter. Single-
   character final groups are now always rejected as encoding
   violations.

base64.b85encode(b, pad=False, *, wrapcol=0)

   Encode the *bytes-like object* *b* using base85 (as used in e.g.
   git-style binary diffs) and return the encoded "bytes".

   The input is padded with "b'\0'" so its length is a multiple of 4
   bytes before encoding.  If *pad* is true, all the resulting
   characters are retained in the output, which will always be a
   multiple of 5 bytes, and thus the length of the data may not be
   preserved on decoding.

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not add any newlines.

    Dodane w wersji 3.4.

   Zmienione w wersji 3.15: Added the *wrapcol* parameter.

base64.b85decode(b, *, ignorechars=b'', canonical=False)

   Decode the base85-encoded *bytes-like object* or ASCII string *b*
   and return the decoded "bytes".

   *ignorechars* should be a *bytes-like object* containing characters
   to ignore from the input.

   If *canonical* is true, non-canonical encodings are rejected. See
   "binascii.a2b_base85()" for details.

    Dodane w wersji 3.4.

   Zmienione w wersji 3.15: Added the *canonical* and *ignorechars*
   parameters. Single-character final groups are now always rejected
   as encoding violations.

base64.z85encode(s, pad=False, *, wrapcol=0)

   Encode the *bytes-like object* *s* using Z85 (as used in ZeroMQ)
   and return the encoded "bytes".

   The input is padded with "b'\0'" so its length is a multiple of 4
   bytes before encoding.  If *pad* is true, all the resulting
   characters are retained in the output, which will always be a
   multiple of 5 bytes, as required by the ZeroMQ standard.

   If *wrapcol* is non-zero, insert a newline ("b'\n'") character
   after at most every *wrapcol* characters. If *wrapcol* is zero
   (default), do not add any newlines.

    Dodane w wersji 3.13.

   Zmienione w wersji 3.15: The *pad* parameter was added.

   Zmienione w wersji 3.15: Added the *wrapcol* parameter.

base64.z85decode(s, *, ignorechars=b'', canonical=False)

   Decode the Z85-encoded *bytes-like object* or ASCII string *s* and
   return the decoded "bytes".

   *ignorechars* should be a *bytes-like object* containing characters
   to ignore from the input.

   If *canonical* is true, non-canonical encodings are rejected. See
   "binascii.a2b_base85()" for details.

    Dodane w wersji 3.13.

   Zmienione w wersji 3.15: Added the *canonical* and *ignorechars*
   parameters. Single-character final groups are now always rejected
   as encoding violations.


Legacy Interface
================

base64.decode(input, output)

   Decode the contents of the binary *input* file and write the
   resulting binary data to the *output* file. *input* and *output*
   must be *file objects*. *input* will be read until
   "input.readline()" returns an empty bytes object.

base64.decodebytes(s)

   Decode the *bytes-like object* *s*, which must contain one or more
   lines of base64 encoded data, and return the decoded "bytes".

    Dodane w wersji 3.1.

base64.encode(input, output)

   Encode the contents of the binary *input* file and write the
   resulting base64 encoded data to the *output* file. *input* and
   *output* must be *file objects*. *input* will be read until
   "input.read()" returns an empty bytes object. "encode()" inserts a
   newline character ("b'\n'") after every 76 bytes of the output, as
   well as ensuring that the output always ends with a newline, as per
   **RFC 2045** (MIME).

base64.encodebytes(s)

   Encode the *bytes-like object* *s*, which can contain arbitrary
   binary data, and return "bytes" containing the base64-encoded data,
   with newlines ("b'\n'") inserted after every 76 bytes of output,
   and ensuring that there is a trailing newline, as per **RFC 2045**
   (MIME).

    Dodane w wersji 3.1.

Przykładowe użycie modułu:

>>> import base64
>>> encoded = base64.b64encode(b'data to be encoded')
>>> encoded
b'ZGF0YSB0byBiZSBlbmNvZGVk'
>>> data = base64.b64decode(encoded)
>>> data
b'data to be encoded'


Security Considerations
=======================

A new security considerations section was added to **RFC 4648**
(section 12); it's recommended to review the security section for any
code deployed to production.

Zobacz także:

  Module "binascii"
     Wspierający moduł zawierający konwersję ASCII-do-binarnego i
     binarnego-do-ASCII.

  **RFC 1521** - MIME (Multipurpose Internet Mail Extensions) Part
  One: Mechanisms for Specifying and Describing the Format of Internet
  Message Bodies
     Sekcja 5.2, "Base64 Treść-Transfer-Kodowanie," dostarcza
     definicji kodowania base64.

  ISO 32000-2 Portable document format - Part 2: PDF 2.0
     Section 7.4.3, "ASCII85Decode Filter," provides the definition of
     the Ascii85 encoding used in PDF and PostScript, including the
     output character set and the details of data length preservation
     using zero-padding and partial output groups.

  ZeroMQ RFC 32/Z85
     The "Formal Specification" section provides the character set
     used in Z85.
