Obiekty słownika¶

type PyDictObject¶: Ten podtyp PyObject reprezentuje obiekt słownika Pythona.

PyTypeObject PyDict_Type¶: Część stabilnego ABI.
Ta instancja PyTypeObject reprezentuje typ słownika Pythona. Jest to ten sam obiekt, co dict w warstwie Pythona.

int PyDict_Check(PyObject *p)¶: Zwraca wartość true, jeśli p jest obiektem typu dict lub instancją podtypu typu dict. Funkcja ta zawsze kończy się powodzeniem.

int PyDict_CheckExact(PyObject *p)¶: Zwraca wartość true, jeśli p jest obiektem typu dict, ale nie jest instancją podtypu typu dict. Funkcja ta zawsze kończy się powodzeniem.

PyObject *PyDict_New()¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Zwraca nowy pusty słownik lub NULL w przypadku niepowodzenia.

PyObject *PyDictProxy_New(PyObject *mapping)¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Return a types.MappingProxyType object for a mapping which enforces read-only behavior. This is normally used to create a view to prevent modification of the dictionary for non-dynamic class types.

void PyDict_Clear(PyObject *p)¶: Część stabilnego ABI.
Empty an existing dictionary of all key-value pairs.

int PyDict_Contains(PyObject *p, PyObject *key)¶: Część stabilnego ABI.
Determine if dictionary p contains key. If an item in p is matches key, return 1, otherwise return 0. On error, return -1. This is equivalent to the Python expression key in p.

int PyDict_ContainsString(PyObject *p, const char *key)¶: This is the same as PyDict_Contains(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

PyObject *PyDict_Copy(PyObject *p)¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Zwraca nowy słownik zawierający te same pary klucz-wartość co p.

int PyDict_SetItem(PyObject *p, PyObject *key, PyObject *val)¶: Część stabilnego ABI.
Insert val into the dictionary p with a key of key. key must be hashable; if it isn’t, TypeError will be raised. Return 0 on success or -1 on failure. This function does not steal a reference to val.

int PyDict_SetItemString(PyObject *p, const char *key, PyObject *val)¶: Część stabilnego ABI.
This is the same as PyDict_SetItem(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

int PyDict_DelItem(PyObject *p, PyObject *key)¶: Część stabilnego ABI.
Remove the entry in dictionary p with key key. key must be hashable; if it isn’t, TypeError is raised. If key is not in the dictionary, KeyError is raised. Return 0 on success or -1 on failure.

int PyDict_DelItemString(PyObject *p, const char *key)¶: Część stabilnego ABI.
This is the same as PyDict_DelItem(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

int PyDict_GetItemRef(PyObject *p, PyObject *key, PyObject **result)¶

Część stabilnego ABI od wersji 3.13.

Return a new strong reference to the object from dictionary p which has a key key:

If the key is present, set *result to a new strong reference to the value and return 1.
If the key is missing, set *result to NULL and return 0.
On error, raise an exception and return -1.

Added in version 3.13.

See also the PyObject_GetItem() function.

PyObject *PyDict_GetItem(PyObject *p, PyObject *key)¶: Wartość zwracana: pożyczona referencja. Część stabilnego ABI.
Return a borrowed reference to the object from dictionary p which has a key key. Return NULL if the key key is missing without setting an exception.

Informacja

Exceptions that occur while this calls __hash__() and __eq__() methods are silently ignored. Prefer the PyDict_GetItemWithError() function instead.

Zmienione w wersji 3.10: Calling this API without GIL held had been allowed for historical reason. It is no longer allowed.

PyObject *PyDict_GetItemWithError(PyObject *p, PyObject *key)¶: Wartość zwracana: pożyczona referencja. Część stabilnego ABI.
Variant of PyDict_GetItem() that does not suppress exceptions. Return NULL with an exception set if an exception occurred. Return NULL without an exception set if the key wasn’t present.

PyObject *PyDict_GetItemString(PyObject *p, const char *key)¶: Wartość zwracana: pożyczona referencja. Część stabilnego ABI.
This is the same as PyDict_GetItem(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Informacja

Exceptions that occur while this calls __hash__() and __eq__() methods or while creating the temporary str object are silently ignored. Prefer using the PyDict_GetItemWithError() function with your own PyUnicode_FromString() key instead.

int PyDict_GetItemStringRef(PyObject *p, const char *key, PyObject **result)¶: Część stabilnego ABI od wersji 3.13.
Similar than PyDict_GetItemRef(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

PyObject *PyDict_SetDefault(PyObject *p, PyObject *key, PyObject *defaultobj)¶: Wartość zwracana: pożyczona referencja.
This is the same as the Python-level dict.setdefault(). If present, it returns the value corresponding to key from the dictionary p. If the key is not in the dict, it is inserted with value defaultobj and defaultobj is returned. This function evaluates the hash function of key only once, instead of evaluating it independently for the lookup and the insertion.

Added in version 3.4.

int PyDict_SetDefaultRef(PyObject *p, PyObject *key, PyObject *default_value, PyObject **result)¶

Inserts default_value into the dictionary p with a key of key if the key is not already present in the dictionary. If result is not NULL, then *result is set to a strong reference to either default_value, if the key was not present, or the existing value, if key was already present in the dictionary. Returns 1 if the key was present and default_value was not inserted, or 0 if the key was not present and default_value was inserted. On failure, returns -1, sets an exception, and sets *result to NULL.

For clarity: if you have a strong reference to default_value before calling this function, then after it returns, you hold a strong reference to both default_value and *result (if it’s not NULL). These may refer to the same object: in that case you hold two separate references to it.

Added in version 3.13.

int PyDict_Pop(PyObject *p, PyObject *key, PyObject **result)¶

Remove key from dictionary p and optionally return the removed value. Do not raise KeyError if the key missing.

If the key is present, set *result to a new reference to the removed value if result is not NULL, and return 1.
If the key is missing, set *result to NULL if result is not NULL, and return 0.
On error, raise an exception and return -1.

This is similar to dict.pop(), but without the default value and not raising KeyError if the key missing.

Added in version 3.13.

int PyDict_PopString(PyObject *p, const char *key, PyObject **result)¶: Similar to PyDict_Pop(), but key is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

PyObject *PyDict_Items(PyObject *p)¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Return a PyListObject containing all the items from the dictionary.

PyObject *PyDict_Keys(PyObject *p)¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Return a PyListObject containing all the keys from the dictionary.

PyObject *PyDict_Values(PyObject *p)¶: Wartość zwracana: nowa referencja. Część stabilnego ABI.
Zwraca PyListObject zawierający wszystkie wartości ze słownika p.

Py_ssize_t PyDict_Size(PyObject *p)¶: Część stabilnego ABI.
Return the number of items in the dictionary. This is equivalent to len(p) on a dictionary.

int PyDict_Next(PyObject *p, Py_ssize_t *ppos, PyObject **pkey, PyObject **pvalue)¶

Część stabilnego ABI.

Iterate over all key-value pairs in the dictionary p. The Py_ssize_t referred to by ppos must be initialized to 0 prior to the first call to this function to start the iteration; the function returns true for each pair in the dictionary, and false once all pairs have been reported. The parameters pkey and pvalue should either point to PyObject* variables that will be filled in with each key and value, respectively, or may be NULL. Any references returned through them are borrowed. ppos should not be altered during iteration. Its value represents offsets within the internal dictionary structure, and since the structure is sparse, the offsets are not consecutive.

Dla przykładu:

PyObject *key, *value;
Py_ssize_t pos = 0;

while (PyDict_Next(self->dict, &pos, &key, &value)) {
    /* do something interesting with the values... */
    ...
}

The dictionary p should not be mutated during iteration. It is safe to modify the values of the keys as you iterate over the dictionary, but only so long as the set of keys does not change. For example:

PyObject *key, *value;
Py_ssize_t pos = 0;

while (PyDict_Next(self->dict, &pos, &key, &value)) {
    long i = PyLong_AsLong(value);
    if (i == -1 && PyErr_Occurred()) {
        return -1;
    }
    PyObject *o = PyLong_FromLong(i + 1);
    if (o == NULL)
        return -1;
    if (PyDict_SetItem(self->dict, key, o) < 0) {
        Py_DECREF(o);
        return -1;
    }
    Py_DECREF(o);
}

The function is not thread-safe in the free-threaded build without external synchronization. You can use Py_BEGIN_CRITICAL_SECTION to lock the dictionary while iterating over it:

Py_BEGIN_CRITICAL_SECTION(self->dict);
while (PyDict_Next(self->dict, &pos, &key, &value)) {
    ...
}
Py_END_CRITICAL_SECTION();

int PyDict_Merge(PyObject *a, PyObject *b, int override)¶: Część stabilnego ABI.
Iterate over mapping object b adding key-value pairs to dictionary a. b may be a dictionary, or any object supporting PyMapping_Keys() and PyObject_GetItem(). If override is true, existing pairs in a will be replaced if a matching key is found in b, otherwise pairs will only be added if there is not a matching key in a. Return 0 on success or -1 if an exception was raised.

int PyDict_Update(PyObject *a, PyObject *b)¶: Część stabilnego ABI.
This is the same as PyDict_Merge(a, b, 1) in C, and is similar to a.update(b) in Python except that PyDict_Update() doesn’t fall back to the iterating over a sequence of key value pairs if the second argument has no „keys” attribute. Return 0 on success or -1 if an exception was raised.

int PyDict_MergeFromSeq2(PyObject *a, PyObject *seq2, int override)¶

Część stabilnego ABI.

Update or merge into dictionary a, from the key-value pairs in seq2. seq2 must be an iterable object producing iterable objects of length 2, viewed as key-value pairs. In case of duplicate keys, the last wins if override is true, else the first wins. Return 0 on success or -1 if an exception was raised. Equivalent Python (except for the return value):

def PyDict_MergeFromSeq2(a, seq2, override):
    for key, value in seq2:
        if override or key not in a:
            a[key] = value

int PyDict_AddWatcher(PyDict_WatchCallback callback)¶: Register callback as a dictionary watcher. Return a non-negative integer id which must be passed to future calls to PyDict_Watch(). In case of error (e.g. no more watcher IDs available), return -1 and set an exception.

Added in version 3.12.

int PyDict_ClearWatcher(int watcher_id)¶: Clear watcher identified by watcher_id previously returned from PyDict_AddWatcher(). Return 0 on success, -1 on error (e.g. if the given watcher_id was never registered.)

Added in version 3.12.

int PyDict_Watch(int watcher_id, PyObject *dict)¶: Mark dictionary dict as watched. The callback granted watcher_id by PyDict_AddWatcher() will be called when dict is modified or deallocated. Return 0 on success or -1 on error.

Added in version 3.12.

int PyDict_Unwatch(int watcher_id, PyObject *dict)¶: Mark dictionary dict as no longer watched. The callback granted watcher_id by PyDict_AddWatcher() will no longer be called when dict is modified or deallocated. The dict must previously have been watched by this watcher. Return 0 on success or -1 on error.

Added in version 3.12.

type PyDict_WatchEvent¶: Enumeration of possible dictionary watcher events: PyDict_EVENT_ADDED, PyDict_EVENT_MODIFIED, PyDict_EVENT_DELETED, PyDict_EVENT_CLONED, PyDict_EVENT_CLEARED, or PyDict_EVENT_DEALLOCATED.

Added in version 3.12.

typedef int (*PyDict_WatchCallback)(PyDict_WatchEvent event, PyObject *dict, PyObject *key, PyObject *new_value)¶

Type of a dict watcher callback function.

If event is PyDict_EVENT_CLEARED or PyDict_EVENT_DEALLOCATED, both key and new_value will be NULL. If event is PyDict_EVENT_ADDED or PyDict_EVENT_MODIFIED, new_value will be the new value for key. If event is PyDict_EVENT_DELETED, key is being deleted from the dictionary and new_value will be NULL.

PyDict_EVENT_CLONED occurs when dict was previously empty and another dict is merged into it. To maintain efficiency of this operation, per-key PyDict_EVENT_ADDED events are not issued in this case; instead a single PyDict_EVENT_CLONED is issued, and key will be the source dictionary.

The callback may inspect but must not modify dict; doing so could have unpredictable effects, including infinite recursion. Do not trigger Python code execution in the callback, as it could modify the dict as a side effect.

If event is PyDict_EVENT_DEALLOCATED, taking a new reference in the callback to the about-to-be-destroyed dictionary will resurrect it and prevent it from being freed at this time. When the resurrected object is destroyed later, any watcher callbacks active at that time will be called again.

Callbacks occur before the notified modification to dict takes place, so the prior state of dict can be inspected.

If the callback sets an exception, it must return -1; this exception will be printed as an unraisable exception using PyErr_WriteUnraisable(). Otherwise it should return 0.

There may already be a pending exception set on entry to the callback. In this case, the callback should return 0 with the same exception still set. This means the callback may not call any other API that can set an exception unless it saves and clears the exception state first, and restores it before returning.

Added in version 3.12.

Obiekty słownika¶

Poprzedni temat

Następny temat

Ta strona