"os" --- Miscellaneous operating system interfaces
**************************************************

**소스 코드:** Lib/os.py

======================================================================

이 모듈은 운영 체제 종속 기능을 사용하는 이식성 있는 방법을 제공합니다
. 파일을 읽거나 쓰고 싶으면 "open()"을 보세요, 경로를 조작하려면
"os.path" 모듈을 보시고, 명령 줄에서 주어진 모든 파일의 모든 줄을 읽으
려면 "fileinput" 모듈을 보십시오. 임시 파일과 디렉터리를 만들려면
"tempfile" 모듈을 보시고, 고수준의 파일과 디렉터리 처리는 "shutil" 모
듈을 보십시오.

이러한 기능의 가용성에 대한 참고 사항:

* 내장된 모든 운영 체제 종속적인 파이썬 모듈의 설계는, 같은 기능을 사
  용할 수 있는 한, 같은 인터페이스를 사용합니다; 예를 들어, 함수
  "os.stat(path)"는 *path* 에 대한 stat 정보를 같은 (POSIX 인터페이스
  에서 기원한) 형식으로 반환합니다.

* 특정 운영 체제에 고유한 확장도 "os" 모듈을 통해서 사용할 수 있지만,
  이러한 기능을 사용하는 것은 물론 이식성에 대한 위협입니다.

* 경로 또는 파일명을 받아들이는 모든 함수는 바이트열과 문자열 객체를
  모두 허용하며, 경로나 파일명이 반환되면 같은 형의 객체를 반환합니다.

* On VxWorks, os.popen, os.fork, os.execv and os.spawn*p* are not
  supported.

* On WebAssembly platforms, Android and iOS, large parts of the "os"
  module are not available or behave differently. APIs related to
  processes (e.g. "fork()", "execve()") and resources (e.g. "nice()")
  are not available. Others like "getuid()" and "getpid()" are
  emulated or stubs. WebAssembly platforms also lack support for
  signals (e.g. "kill()", "wait()").

참고:

  이 모듈의 모든 함수는, 올바르지 않거나 액세스할 수 없는 파일명과 경
  로일 때, 또는 올바른 형의 인자이지만, 운영 체제에서 허용하지 않으면
  "OSError"(또는 이것의 서브 클래스)를 발생시킵니다.

exception os.error

   내장 "OSError" 예외의 별칭.

os.name

   임포트 된 운영 체제 종속 모듈의 이름. 다음과 같은 이름이 현재 등록
   되어있습니다: "'posix'", "'nt'", "'java'".

   더 보기:

     "sys.platform" has a finer granularity.  "os.uname()" gives
     system-dependent version information.

     "platform" 모듈은 시스템의 아이덴티티에 대한 자세한 검사를 제공합
     니다.


파일명, 명령 줄 인자 및 환경 변수
=================================

In Python, file names, command line arguments, and environment
variables are represented using the string type. On some systems,
decoding these strings to and from bytes is necessary before passing
them to the operating system. Python uses the *filesystem encoding and
error handler* to perform this conversion (see
"sys.getfilesystemencoding()").

The *filesystem encoding and error handler* are configured at Python
startup by the "PyConfig_Read()" function: see "filesystem_encoding"
and "filesystem_errors" members of "PyConfig".

버전 3.1에서 변경: On some systems, conversion using the file system
encoding may fail. In this case, Python uses the surrogateescape
encoding error handler, which means that undecodable bytes are
replaced by a Unicode character U+DC*xx* on decoding, and these are
again translated to the original byte on encoding.

The *file system encoding* must guarantee to successfully decode all
bytes below 128. If the file system encoding fails to provide this
guarantee, API functions can raise "UnicodeError".

See also the *locale encoding*.


Python UTF-8 Mode
=================

Added in version 3.7: See **PEP 540** for more details.

The Python UTF-8 Mode ignores the *locale encoding* and forces the
usage of the UTF-8 encoding:

* Use UTF-8 as the *filesystem encoding*.

* "sys.getfilesystemencoding()" returns "'utf-8'".

* "locale.getpreferredencoding()" returns "'utf-8'" (the
  *do_setlocale* argument has no effect).

* "sys.stdin", "sys.stdout", and "sys.stderr" all use UTF-8 as their
  text encoding, with the "surrogateescape" error handler being
  enabled for "sys.stdin" and "sys.stdout" ("sys.stderr" continues to
  use "backslashreplace" as it does in the default locale-aware mode)

* On Unix, "os.device_encoding()" returns "'utf-8'" rather than the
  device encoding.

Note that the standard stream settings in UTF-8 mode can be overridden
by "PYTHONIOENCODING" (just as they can be in the default locale-aware
mode).

As a consequence of the changes in those lower level APIs, other
higher level APIs also exhibit different default behaviours:

* Command line arguments, environment variables and filenames are
  decoded to text using the UTF-8 encoding.

* "os.fsdecode()" and "os.fsencode()" use the UTF-8 encoding.

* "open()", "io.open()", and "codecs.open()" use the UTF-8 encoding by
  default. However, they still use the strict error handler by default
  so that attempting to open a binary file in text mode is likely to
  raise an exception rather than producing nonsense data.

The Python UTF-8 Mode is enabled if the LC_CTYPE locale is "C" or
"POSIX" at Python startup (see the "PyConfig_Read()" function).

It can be enabled or disabled using the "-X utf8" command line option
and the "PYTHONUTF8" environment variable.

If the "PYTHONUTF8" environment variable is not set at all, then the
interpreter defaults to using the current locale settings, *unless*
the current locale is identified as a legacy ASCII-based locale (as
described for "PYTHONCOERCECLOCALE"), and locale coercion is either
disabled or fails. In such legacy locales, the interpreter will
default to enabling UTF-8 mode unless explicitly instructed not to do
so.

The Python UTF-8 Mode can only be enabled at the Python startup. Its
value can be read from "sys.flags.utf8_mode".

See also the UTF-8 mode on Windows and the *filesystem encoding and
error handler*.

더 보기:

  **PEP 686**
     Python 3.15 will make Python UTF-8 Mode default.


프로세스 매개 변수
==================

이 함수들과 데이터 항목은 현재 프로세스와 사용자에 관한 정보와 관련 연
산을 제공합니다.

os.ctermid()

   프로세스의 제어 터미널에 해당하는 파일명을 반환합니다.

   가용성: Unix, not WASI.

os.environ

   A *mapping* object where keys and values are strings that represent
   the process environment.  For example, "environ['HOME']" is the
   pathname of your home directory (on some platforms), and is
   equivalent to "getenv("HOME")" in C.

   This mapping is captured the first time the "os" module is
   imported, typically during Python startup as part of processing
   "site.py".  Changes to the environment made after this time are not
   reflected in "os.environ", except for changes made by modifying
   "os.environ" directly.

   이 매핑은 환경을 조회하는 것뿐 아니라 환경을 수정하는 데도 사용될
   수 있습니다. 매핑이 수정될 때 "putenv()"가 자동으로 호출됩니다.

   유닉스에서, 키와 값은 "sys.getfilesystemencoding()" 과
   "'surrogateescape'" 에러 처리기를 사용합니다. 다른 인코딩을 사용하
   려면 "environb"를 사용하십시오.

   On Windows, the keys are converted to uppercase. This also applies
   when getting, setting, or deleting an item. For example,
   "environ['monty'] = 'python'" maps the key "'MONTY'" to the value
   "'python'".

   참고:

     Calling "putenv()" directly does not change "os.environ", so it's
     better to modify "os.environ".

   참고:

     On some platforms, including FreeBSD and macOS, setting "environ"
     may cause memory leaks.  Refer to the system documentation for
     "putenv()".

   You can delete items in this mapping to unset environment
   variables. "unsetenv()" will be called automatically when an item
   is deleted from "os.environ", and when one of the "pop()" or
   "clear()" methods is called.

   더 보기: The "os.reload_environ()" function.

   버전 3.9에서 변경: **PEP 584**의 병합("|")과 업데이트("|=") 연산자
   를 지원하도록 갱신되었습니다.

os.environb

   Bytes version of "environ": a *mapping* object where both keys and
   values are "bytes" objects representing the process environment.
   "environ" and "environb" are synchronized (modifying "environb"
   updates "environ", and vice versa).

   "environb" is only available if "supports_bytes_environ" is "True".

   Added in version 3.2.

   버전 3.9에서 변경: **PEP 584**의 병합("|")과 업데이트("|=") 연산자
   를 지원하도록 갱신되었습니다.

os.reload_environ()

   The "os.environ" and "os.environb" mappings are a cache of
   environment variables at the time that Python started. As such,
   changes to the current process environment are not reflected if
   made outside Python, or by "os.putenv()" or "os.unsetenv()". Use
   "os.reload_environ()" to update "os.environ" and "os.environb" with
   any such changes to the current process environment.

   경고:

     This function is not thread-safe. Calling it while the
     environment is being modified in an other thread is an undefined
     behavior. Reading from "os.environ" or "os.environb", or calling
     "os.getenv()" while reloading, may return an empty result.

   Added in version 3.14.

os.chdir(path)
os.fchdir(fd)
os.getcwd()

   이 함수는 파일과 디렉터리에 설명되어 있습니다.

os.fsencode(filename)

   Encode *path-like* *filename* to the *filesystem encoding and error
   handler*; return "bytes" unchanged.

   "fsdecode()"는 역 함수입니다.

   Added in version 3.2.

   버전 3.6에서 변경: "os.PathLike" 인터페이스를 구현하는 객체를 받아
   들이도록 지원이 추가되었습니다.

os.fsdecode(filename)

   Decode the *path-like* *filename* from the *filesystem encoding and
   error handler*; return "str" unchanged.

   "fsencode()"는 역 함수입니다.

   Added in version 3.2.

   버전 3.6에서 변경: "os.PathLike" 인터페이스를 구현하는 객체를 받아
   들이도록 지원이 추가되었습니다.

os.fspath(path)

   경로의 파일 시스템 표현을 돌려줍니다.

   "str"이나 "bytes"가 전달되면, 변경되지 않은 상태로 반환됩니다. 그렇
   지 않으면 "__fspath__()"가 호출되고, 해당 값이 "str"이나 "bytes" 객
   체인 한 그 값이 반환됩니다. 다른 모든 경우에는 "TypeError"가 발생합
   니다.

   Added in version 3.6.

class os.PathLike

   파일 시스템 경로를 나타내는 객체(예를 들어 "pathlib.PurePath")의 *
   추상 베이스 클래스*입니다.

   Added in version 3.6.

   abstractmethod __fspath__()

      객체의 파일 시스템 경로 표현을 돌려줍니다.

      이 메서드는 "str"이나 "bytes" 객체만 반환해야 하며, "str"을 선호
      합니다.

os.getenv(key, default=None)

   Return the value of the environment variable *key* as a string if
   it exists, or *default* if it doesn't. *key* is a string. Note that
   since "getenv()" uses "os.environ", the mapping of "getenv()" is
   similarly also captured on import, and the function may not reflect
   future environment changes.

   유닉스에서, 키와 값은 "sys.getfilesystemencoding()" 과
   "'surrogateescape'" 에러 처리기로 디코딩됩니다. 다른 인코딩을 사용
   하려면 "os.getenvb()"를 사용하십시오.

   가용성: Unix, Windows.

os.getenvb(key, default=None)

   Return the value of the environment variable *key* as bytes if it
   exists, or *default* if it doesn't. *key* must be bytes. Note that
   since "getenvb()" uses "os.environb", the mapping of "getenvb()" is
   similarly also captured on import, and the function may not reflect
   future environment changes.

   "getenvb()" is only available if "supports_bytes_environ" is
   "True".

   가용성: Unix.

   Added in version 3.2.

os.get_exec_path(env=None)

   셸과 비슷하게, 프로세스를 시작할 때 지정된 이름의 실행 파일을 검색
   할 디렉터리 리스트를 반환합니다. (지정된다면) *env* 는 PATH를 조회
   할 환경 변수 딕셔너리 여야 합니다. 기본적으로, *env* 가 "None"이면,
   "environ"이 사용됩니다.

   Added in version 3.2.

os.getegid()

   현재 프로세스의 유효(effective) 그룹 ID를 반환합니다. 이것은 현재
   프로세스에서 실행 중인 파일의 "set id" 비트에 해당합니다.

   가용성: Unix, not WASI.

os.geteuid()

   현재 프로세스의 유효(effective) 사용자 ID를 반환합니다.

   가용성: Unix, not WASI.

os.getgid()

   현재 프로세스의 실제(real) 그룹 ID를 반환합니다.

   가용성: Unix.

   The function is a stub on WASI, see 웹어셈블리 플랫폼 for more
   information.

os.getgrouplist(user, group, /)

   Return list of group ids that *user* belongs to. If *group* is not
   in the list, it is included; typically, *group* is specified as the
   group ID field from the password record for *user*, because that
   group ID will otherwise be potentially omitted.

   가용성: Unix, not WASI.

   Added in version 3.3.

os.getgroups()

   현재 프로세스와 관련된 보충(supplemental) 그룹 ID 목록을 반환합니다
   .

   가용성: Unix, not WASI.

   참고:

     On macOS, "getgroups()" behavior differs somewhat from other Unix
     platforms. If the Python interpreter was built with a deployment
     target of "10.5" or earlier, "getgroups()" returns the list of
     effective group ids associated with the current user process;
     this list is limited to a system-defined number of entries,
     typically 16, and may be modified by calls to "setgroups()" if
     suitably privileged. If built with a deployment target greater
     than "10.5", "getgroups()" returns the current group access list
     for the user associated with the effective user id of the
     process; the group access list may change over the lifetime of
     the process, it is not affected by calls to "setgroups()", and
     its length is not limited to 16.  The deployment target value,
     "MACOSX_DEPLOYMENT_TARGET", can be obtained with
     "sysconfig.get_config_var()".

os.getlogin()

   프로세스의 제어 터미널에 로그인한 사용자의 이름을 반환합니다. 대부
   분 목적에서, "getpass.getuser()"를 사용하는 것이 더 유용한데, 이 함
   수는 환경 변수 "LOGNAME" 이나 "USERNAME"을 검사하여 사용자가 누구인
   지 알아내고, 현재 실제 사용자 ID의 로그인 이름을 얻기 위해
   "pwd.getpwuid(os.getuid())[0]"로 폴백 하기 때문입니다.

   가용성: Unix, Windows, not WASI.

os.getpgid(pid)

   프로세스 ID *pid* 를 갖는 프로세스의 프로세스 그룹 ID를 반환합니다.
   *pid* 가 0이면, 현재 프로세스의 프로세스 그룹 id가 반환됩니다.

   가용성: Unix, not WASI.

os.getpgrp()

   현재 프로세스 그룹의 ID를 반환합니다.

   가용성: Unix, not WASI.

os.getpid()

   현재의 프로세스 ID를 반환합니다.

   The function is a stub on WASI, see 웹어셈블리 플랫폼 for more
   information.

os.getppid()

   부모의 프로세스 ID를 반환합니다. 부모 프로세스가 종료했으면, 유닉스
   에서 반환된 id는 init 프로세스 (1) 중 하나이며, 윈도우에서는 여전히
   같은 id인데, 다른 프로세스에서 이미 재사용했을 수 있습니다.

   가용성: Unix, Windows, not WASI.

   버전 3.2에서 변경: 윈도우에 대한 지원이 추가되었습니다.

os.getpriority(which, who)

   프로그램 스케줄 우선순위를 얻습니다. *which* 값은 "PRIO_PROCESS",
   "PRIO_PGRP" 또는 "PRIO_USER" 중 하나이고, *who*는 *which* 에 상대적
   으로 해석됩니다 ("PRIO_PROCESS" 면 프로세스 식별자, "PRIO_PGRP" 면
   프로세스 그룹 식별자, "PRIO_USER" 면 사용자 ID). 0 값의 *who*는 (각
   각) 호출하는 프로세스, 호출하는 프로세스의 프로세스 그룹, 호출하는
   프로세스의 실제 사용자 ID를 나타냅니다.

   가용성: Unix, not WASI.

   Added in version 3.3.

os.PRIO_PROCESS
os.PRIO_PGRP
os.PRIO_USER

   "getpriority()" 와 "setpriority()" 함수의 매개 변숫값

   가용성: Unix, not WASI.

   Added in version 3.3.

os.PRIO_DARWIN_THREAD
os.PRIO_DARWIN_PROCESS
os.PRIO_DARWIN_BG
os.PRIO_DARWIN_NONUI

   "getpriority()" 와 "setpriority()" 함수의 매개 변숫값

   가용성: macOS

   Added in version 3.12.

os.getresuid()

   현재 프로세스의 실제(real), 유효(effective) 및 저장된(saved) 사용자
   ID를 나타내는 튜플 (ruid, euid, suid)를 반환합니다.

   가용성: Unix, not WASI.

   Added in version 3.2.

os.getresgid()

   현재 프로세스의 실제(real), 유효(effective) 및 저장된(saved) 그룹
   ID를 나타내는 튜플 (rgid, egid, sgid)를 반환합니다.

   가용성: Unix, not WASI.

   Added in version 3.2.

os.getuid()

   현재 프로세스의 실제(real) 사용자 ID를 반환합니다.

   가용성: Unix.

   The function is a stub on WASI, see 웹어셈블리 플랫폼 for more
   information.

os.initgroups(username, gid, /)

   지정된 사용자 이름이 구성원인 모든 그룹과 지정된 그룹 ID로 구성된
   그룹 액세스 목록을 초기화하기 위해 시스템 initgroups()를 호출합니다
   .

   가용성: Unix, not WASI, not Android.

   Added in version 3.2.

os.putenv(key, value, /)

   *key* 라는 환경 변수를 문자열 *value* 로 설정합니다. 이러한 환경의
   변화는 "os.system()", "popen()" 또는 "fork()" 및 "execv()"로 시작된
   자식 프로세스에 영향을 줍니다.

   Assignments to items in "os.environ" are automatically translated
   into corresponding calls to "putenv()"; however, calls to
   "putenv()" don't update "os.environ", so it is actually preferable
   to assign to items of "os.environ". This also applies to "getenv()"
   and "getenvb()", which respectively use "os.environ" and
   "os.environb" in their implementations.

   See also the "os.reload_environ()" function.

   참고:

     On some platforms, including FreeBSD and macOS, setting "environ"
     may cause memory leaks. Refer to the system documentation for
     "putenv()".

   "key", "value"를 인자로 감사 이벤트(auditing event) "os.putenv"를
   발생시킵니다.

   버전 3.9에서 변경: 이 함수는 이제 항상 사용할 수 있습니다.

os.setegid(egid, /)

   현재 프로세스의 유효 그룹 ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

os.seteuid(euid, /)

   현재 프로세스의 유효 사용자 ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

os.setgid(gid, /)

   현재 프로세스의 그룹 ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

os.setgroups(groups, /)

   현재 프로세스와 연관된 보충(supplemental) 그룹 ID의 목록을 *groups*
   로 설정합니다. *groups* 는 시퀀스 여야 하며, 각 요소는 그룹을 식별
   하는 정수여야 합니다. 이 연산은 대개 슈퍼 유저만 사용할 수 있습니다
   .

   가용성: Unix, not WASI.

   참고:

     On macOS, the length of *groups* may not exceed the system-
     defined maximum number of effective group ids, typically 16. See
     the documentation for "getgroups()" for cases where it may not
     return the same group list set by calling setgroups().

os.setns(fd, nstype=0)

   Reassociate the current thread with a Linux namespace. See the
   *setns(2)* and *namespaces(7)* man pages for more details.

   If *fd* refers to a "/proc/*pid*/ns/" link, "setns()" reassociates
   the calling thread with the namespace associated with that link,
   and *nstype* may be set to one of the CLONE_NEW* constants to
   impose constraints on the operation ("0" means no constraints).

   Since Linux 5.8, *fd* may refer to a PID file descriptor obtained
   from "pidfd_open()". In this case, "setns()" reassociates the
   calling thread into one or more of the same namespaces as the
   thread referred to by *fd*. This is subject to any constraints
   imposed by *nstype*, which is a bit mask combining one or more of
   the CLONE_NEW* constants, e.g. "setns(fd, os.CLONE_NEWUTS |
   os.CLONE_NEWPID)". The caller's memberships in unspecified
   namespaces are left unchanged.

   *fd* can be any object with a "fileno()" method, or a raw file
   descriptor.

   This example reassociates the thread with the "init" process's
   network namespace:

      fd = os.open("/proc/1/ns/net", os.O_RDONLY)
      os.setns(fd, os.CLONE_NEWNET)
      os.close(fd)

   가용성: Linux >= 3.0 with glibc >= 2.14.

   Added in version 3.12.

   더 보기: The "unshare()" function.

os.setpgrp()

   Call the system call "setpgrp()" or "setpgrp(0, 0)" depending on
   which version is implemented (if any).  See the Unix manual for the
   semantics.

   가용성: Unix, not WASI.

os.setpgid(pid, pgrp, /)

   Call the system call "setpgid()" to set the process group id of the
   process with id *pid* to the process group with id *pgrp*.  See the
   Unix manual for the semantics.

   가용성: Unix, not WASI.

os.setpriority(which, who, priority)

   프로그램 스케줄 우선순위를 설정합니다. *which* 값은 "PRIO_PROCESS",
   "PRIO_PGRP" 또는 "PRIO_USER" 중 하나이고, *who*는 *which* 에 상대적
   으로 해석됩니다 ("PRIO_PROCESS" 면 프로세스 식별자, "PRIO_PGRP" 면
   프로세스 그룹 식별자, "PRIO_USER" 면 사용자 ID). 0 값의 *who*는 (각
   각) 호출하는 프로세스, 호출하는 프로세스의 프로세스 그룹, 호출하는
   프로세스의 실제 사용자 ID를 나타냅니다. *priority* 는 -20에서 19 사
   이의 값입니다. 기본 우선순위는 0입니다; 우선순위가 낮으면 더 유리하
   게 스케줄 됩니다.

   가용성: Unix, not WASI.

   Added in version 3.3.

os.setregid(rgid, egid, /)

   현재 프로세스의 실제(real) 및 유효한(effective) 그룹 ID를 설정합니
   다.

   가용성: Unix, not WASI, not Android.

os.setresgid(rgid, egid, sgid, /)

   현재 프로세스의 실제(real), 유효(effective) 및 저장된(saved) 그룹
   ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

   Added in version 3.2.

os.setresuid(ruid, euid, suid, /)

   현재 프로세스의 실제(real), 유효(effective) 및 저장된(saved) 사용자
   ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

   Added in version 3.2.

os.setreuid(ruid, euid, /)

   현재 프로세스의 실제(real) 및 유효(effective) 사용자 ID를 설정합니
   다.

   가용성: Unix, not WASI, not Android.

os.getsid(pid, /)

   Call the system call "getsid()".  See the Unix manual for the
   semantics.

   가용성: Unix, not WASI.

os.setsid()

   Call the system call "setsid()".  See the Unix manual for the
   semantics.

   가용성: Unix, not WASI.

os.setuid(uid, /)

   현재 프로세스의 사용자 ID를 설정합니다.

   가용성: Unix, not WASI, not Android.

os.strerror(code, /)

   Return the error message corresponding to the error code in *code*.
   On platforms where "strerror()" returns "NULL" when given an
   unknown error number, "ValueError" is raised.

os.supports_bytes_environ

   환경의 원시 OS 형이 바이트열이면 "True" (예를 들어, 윈도우에서는
   "False").

   Added in version 3.2.

os.umask(mask, /)

   현재 숫자 umask를 설정하고 이전 umask를 반환합니다.

   The function is a stub on WASI, see 웹어셈블리 플랫폼 for more
   information.

os.uname()

   현재 운영 체제를 식별하는 정보를 반환합니다. 반환 값은 5가지 어트리
   뷰트를 가진 객체입니다:

   * "sysname" - 운영 체제 이름

   * "nodename" - 네트워크상의 기계 이름 (구현이 정의)

   * "release" - 운영 체제 릴리스

   * "version" - 운영 체제 버전

   * "machine" - 하드웨어 식별자

   하위 호환성을 위해, 이 객체는 이터러블이기도 해서, "sysname",
   "nodename", "release", "version" 및 "machine"이 이 순서로 포함된 5-
   튜플처럼 작동합니다.

   일부 시스템에서는 "nodename"을 8자나 선행 구성 요소로 자릅니다; 호
   스트 이름을 얻는 더 좋은 방법은 "socket.gethostname()" 또는 더 나아
   가 "socket.gethostbyaddr(socket.gethostname())"입니다.

   On macOS, iOS and Android, this returns the *kernel* name and
   version (i.e., "'Darwin'" on macOS and iOS; "'Linux'" on Android).
   "platform.uname()" can be used to get the user-facing operating
   system name and version on iOS and Android.

   가용성: Unix.

   버전 3.3에서 변경: 반환형이 튜플에서 이름이 지정된 어트리뷰트를 가
   진 튜플류 객체로 변경되었습니다.

os.unsetenv(key, /)

   *key* 라는 이름의 환경 변수를 삭제합니다. 이러한 환경 변화는
   "os.system()", "popen()" 또는 "fork()" 및 "execv()"로 시작된 자식
   프로세스에 영향을 줍니다.

   Deletion of items in "os.environ" is automatically translated into
   a corresponding call to "unsetenv()"; however, calls to
   "unsetenv()" don't update "os.environ", so it is actually
   preferable to delete items of "os.environ".

   See also the "os.reload_environ()" function.

   "key"를 인자로 감사 이벤트(auditing event) "os.unsetenv"를 발생시킵
   니다.

   버전 3.9에서 변경: 이 함수는 이제 항상 사용할 수 있고 윈도우에서도
   사용할 수 있습니다.

os.unshare(flags)

   Disassociate parts of the process execution context, and move them
   into a newly created namespace. See the *unshare(2)* man page for
   more details. The *flags* argument is a bit mask, combining zero or
   more of the CLONE_* constants, that specifies which parts of the
   execution context should be unshared from their existing
   associations and moved to a new namespace. If the *flags* argument
   is "0", no changes are made to the calling process's execution
   context.

   가용성: Linux >= 2.6.16.

   Added in version 3.12.

   더 보기: The "setns()" function.

Flags to the "unshare()" function, if the implementation supports
them. See *unshare(2)* in the Linux manual for their exact effect and
availability.

os.CLONE_FILES
os.CLONE_FS
os.CLONE_NEWCGROUP
os.CLONE_NEWIPC
os.CLONE_NEWNET
os.CLONE_NEWNS
os.CLONE_NEWPID
os.CLONE_NEWTIME
os.CLONE_NEWUSER
os.CLONE_NEWUTS
os.CLONE_SIGHAND
os.CLONE_SYSVSEM
os.CLONE_THREAD
os.CLONE_VM


파일 객체 생성
==============

이 함수들은 새로운 *파일 객체*를 만듭니다. (파일 기술자를 여는 것에 관
해서는 "open()"를 참조하십시오.)

os.fdopen(fd, *args, **kwargs)

   파일 기술자 *fd에* 연결된 열린 파일 객체를 반환합니다. 이것은
   "open()" 내장 함수의 별칭이며 같은 인자를 받아들입니다. 유일한 차이
   점은 "fdopen()"의 첫 번째 인자는 항상 정수여야 한다는 것입니다.


파일 기술자 연산
================

이 함수들은 파일 기술자를 사용하여 참조된 I/O 스트림에 작용합니다.

파일 기술자는 현재 프로세스에 의해 열린 파일에 대응하는 작은 정수입니
다. 예를 들어, 표준 입력은 보통 파일 기술자 0이고, 표준 출력은 1이며,
표준 에러는 2입니다. 프로세스에 의해 열린 추가 파일은 3, 4, 5 등으로
지정됩니다. "파일 기술자"라는 이름은 약간 기만적입니다; 유닉스 플랫폼
에서, 소켓과 파이프도 파일 기술자에 의해 참조됩니다.

"fileno()" 메서드는 필요할 때 *파일 객체*와 연관된 파일 기술자를 얻는
데 사용될 수 있습니다. 파일 기술자를 직접 사용하면 파일 객체 메서드를
거치지 않아서, 데이터의 내부 버퍼링과 같은 측면을 무시하게 되는 것에
유의하십시오.

os.close(fd)

   파일 기술자 *fd*를 닫습니다.

   참고:

     이 함수는 저수준 I/O를 위한 것이며, "os.open()" 또는 "pipe()"에
     의해 반환된 파일 기술자에 적용되어야 합니다. 내장 함수 "open()"
     나 "popen()" 또는 "fdopen()"에 의해 반환된 "파일 객체"를 닫으려면
     , "close()" 메서드를 사용하십시오.

os.closerange(fd_low, fd_high, /)

   에러는 무시하면서, *fd_low*(포함)부터 *fd_high*(제외)까지 모든 파일
   기술자를 닫습니다. 다음과 동등합니다 (하지만 훨씬 빠릅니다):

      for fd in range(fd_low, fd_high):
          try:
              os.close(fd)
          except OSError:
              pass

os.copy_file_range(src, dst, count, offset_src=None, offset_dst=None)

   Copy *count* bytes from file descriptor *src*, starting from offset
   *offset_src*, to file descriptor *dst*, starting from offset
   *offset_dst*. If *offset_src* is "None", then *src* is read from
   the current position; respectively for *offset_dst*.

   In Linux kernel older than 5.3, the files pointed to by *src* and
   *dst* must reside in the same filesystem, otherwise an "OSError" is
   raised with "errno" set to "errno.EXDEV".

   This copy is done without the additional cost of transferring data
   from the kernel to user space and then back into the kernel.
   Additionally, some filesystems could implement extra optimizations,
   such as the use of reflinks (i.e., two or more inodes that share
   pointers to the same copy-on-write disk blocks; supported file
   systems include btrfs and XFS) and server-side copy (in the case of
   NFS).

   The function copies bytes between two file descriptors. Text
   options, like the encoding and the line ending, are ignored.

   반환 값은 복사된 바이트의 양입니다. 이것은 요구된 양보다 적을 수 있
   습니다.

   참고:

     On Linux, "os.copy_file_range()" should not be used for copying a
     range of a pseudo file from a special filesystem like procfs and
     sysfs. It will always copy no bytes and return 0 as if the file
     was empty because of a known Linux kernel issue.

   가용성: Linux >= 4.5 with glibc >= 2.27.

   Added in version 3.8.

os.device_encoding(fd)

   *fd* 와 연관된 장치가 터미널에 연결되어 있을 때 인코딩을 설명하는
   문자열을 반환합니다; 그렇지 않으면 "None"을 반환합니다.

   On Unix, if the Python UTF-8 Mode is enabled, return "'UTF-8'"
   rather than the device encoding.

   버전 3.10에서 변경: On Unix, the function now implements the Python
   UTF-8 Mode.

os.dup(fd, /)

   파일 기술자 *fd* 의 복사본을 반환합니다. 새 파일 기술자는 상속 불가
   능합니다.

   윈도우에서는, 표준 스트림(0: stdin, 1: stdout, 2: stderr)을 복제할
   때, 새 파일 기술자가 상속 가능합니다.

   가용성: not WASI.

   버전 3.4에서 변경: 새로운 파일 기술자는 이제 상속 불가능합니다.

os.dup2(fd, fd2, inheritable=True)

   파일 기술자 *fd* 를 *fd2*에 복제하고, 필요하면 먼저 후자를 닫습니다
   . *fd2*를 반환합니다. 새로운 파일 기술자는 기본적으로 상속 가능하고
   , *inheritable* 이 "False"면 상속 불가능합니다.

   가용성: not WASI.

   버전 3.4에서 변경: 선택적 *inheritable* 매개 변수를 추가했습니다.

   버전 3.7에서 변경: 성공하면 *fd2* 를 반환합니다. 이전에는 항상
   "None"을 반환했습니다.

os.fchmod(fd, mode)

   *fd* 에 의해 주어진 파일의 모드를 숫자 *mode* 로 변경합니다. *mode*
   의 가능한 값은 "chmod()" 문서를 참조하십시오. 파이썬 3.3부터는,
   "os.chmod(fd, mode)"와 같습니다.

   "path", "mode", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chmod"를 발생시킵니다.

   가용성: Unix, Windows.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

   버전 3.13에서 변경: Added support on Windows.

os.fchown(fd, uid, gid)

   *fd* 에 의해 주어진 파일의 소유자와 그룹 id를 숫자 *uid* 와 *gid*로
   변경합니다. ID 중 하나를 변경하지 않으려면, 그것을 -1로 설정하십시
   오. "chown()"를 참조하십시오. 파이썬 3.3부터는, "os.chown(fd, uid,
   gid)"와 같습니다.

   "path", "uid", "gid", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chown"을 발생시킵니다.

   가용성: Unix.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

os.fdatasync(fd)

   파일 기술자 *fd* 로 주어진 파일을 디스크에 쓰도록 강제합니다. 메타
   데이터를 갱신하도록 강제하지 않습니다.

   가용성: Unix.

   참고:

     이 함수는 MacOS에서는 사용할 수 없습니다.

os.fpathconf(fd, name, /)

   열린 파일과 관련된 시스템 구성 정보를 반환합니다. *name* 은 조회할
   구성 값을 지정합니다; 정의된 시스템 값의 이름인 문자열일 수 있습니
   다; 이 이름은 여러 표준(POSIX.1, 유닉스 95, 유닉스 98 및 기타)에서
   지정됩니다. 일부 플랫폼은 추가 이름도 정의합니다. 호스트 운영 체제
   에 알려진 이름은 "pathconf_names" 딕셔너리에서 제공됩니다. 이 매핑
   에 포함되지 않은 구성 변수의 경우, *name*에 정수를 전달하는 것도 허
   용됩니다.

   *name* 이 문자열이고 알 수 없으면, "ValueError"가 발생합니다.
   *name*에 대한 특정 값이 호스트 시스템에서 지원되지 않으면,
   "pathconf_names"에 포함되어 있어도, 에러 번호가 "errno.EINVAL"인
   "OSError"가 발생합니다.

   파이썬 3.3부터, "os.pathconf(fd, name)"과 같습니다.

   가용성: Unix.

os.fstat(fd)

   파일 기술자 *fd* 의 상태를 가져옵니다. "stat_result" 객체를 반환합
   니다.

   파이썬 3.3부터는, "os.stat(fd)"와 같습니다.

   더 보기: "stat()" 함수.

os.fstatvfs(fd, /)

   "statvfs()" 처럼, 파일 기술자 *fd* 와 연관된 파일을 포함하는 파일
   시스템에 대한 정보를 반환합니다. 파이썬 3.3부터는, "os.statvfs(fd)"
   와 같습니다.

   가용성: Unix.

os.fsync(fd)

   Force write of file with filedescriptor *fd* to disk.  On Unix,
   this calls the native "fsync()" function; on Windows, the MS
   "_commit()" function.

   버퍼링 된 파이썬 *파일 객체* *f*로 시작하는 경우, *f* 와 연관된 모
   든 내부 버퍼가 디스크에 기록되게 하려면, 먼저 "f.flush()"를 수행한
   다음 "os.fsync(f.fileno())"를 하십시오.

   가용성: Unix, Windows.

os.ftruncate(fd, length, /)

   파일 기술자 *fd*에 해당하는 파일을 잘라내어 최대 *length* 바이트가
   되도록 만듭니다. 파이썬 3.3부터는, "os.truncate(fd, length)"와 같습
   니다.

   "fd", "length"를 인자로 감사 이벤트(auditing event) "os.truncate"를
   발생시킵니다.

   가용성: Unix, Windows.

   버전 3.5에서 변경: 윈도우 지원 추가

os.get_blocking(fd, /)

   파일 기술자의 블로킹 모드를 얻어옵니다: "O_NONBLOCK" 플래그가 설정
   되었으면 "False", 플래그가 지워졌으면 "True".

   "set_blocking()" 및 "socket.socket.setblocking()"도 참조하십시오.

   가용성: Unix, Windows.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

   On Windows, this function is limited to pipes.

   Added in version 3.5.

   버전 3.12에서 변경: Added support for pipes on Windows.

os.grantpt(fd, /)

   Grant access to the slave pseudo-terminal device associated with
   the master pseudo-terminal device to which the file descriptor *fd*
   refers. The file descriptor *fd* is not closed upon failure.

   Calls the C standard library function "grantpt()".

   가용성: Unix, not WASI.

   Added in version 3.13.

os.isatty(fd, /)

   파일 기술자 *fd* 가 열려 있고 tty(류의) 장치에 연결되어 있으면
   "True"를 반환하고, 그렇지 않으면 "False"를 반환합니다.

os.lockf(fd, cmd, len, /)

   열린 파일 기술자에 POSIX 록을 적용, 검사 또는 제거합니다. *fd* 는
   열린 파일 기술자입니다. *cmd* 는 사용할 명령을 지정합니다 -
   "F_LOCK", "F_TLOCK", "F_ULOCK" 또는 "F_TEST" 중 하나. *len* 은 잠글
   파일의 영역을 지정합니다.

   "fd", "cmd", "len"을 인자로 감사 이벤트(auditing event) "os.lockf"
   를 발생시킵니다.

   가용성: Unix.

   Added in version 3.3.

os.F_LOCK
os.F_TLOCK
os.F_ULOCK
os.F_TEST

   "lockf()"가 취할 조치를 지정하는 플래그.

   가용성: Unix.

   Added in version 3.3.

os.login_tty(fd, /)

   Prepare the tty of which fd is a file descriptor for a new login
   session. Make the calling process a session leader; make the tty
   the controlling tty, the stdin, the stdout, and the stderr of the
   calling process; close fd.

   가용성: Unix, not WASI.

   Added in version 3.11.

os.lseek(fd, pos, whence, /)

   Set the current position of file descriptor *fd* to position *pos*,
   modified by *whence*, and return the new position in bytes relative
   to the start of the file. Valid values for *whence* are:

   * "SEEK_SET" or "0" -- set *pos* relative to the beginning of the
     file

   * "SEEK_CUR" or "1" -- set *pos* relative to the current file
     position

   * "SEEK_END" or "2" -- set *pos* relative to the end of the file

   * "SEEK_HOLE" -- set *pos* to the next data location, relative to
     *pos*

   * "SEEK_DATA" -- set *pos* to the next data hole, relative to *pos*

   버전 3.3에서 변경: Add support for "SEEK_HOLE" and "SEEK_DATA".

os.SEEK_SET
os.SEEK_CUR
os.SEEK_END

   Parameters to the "lseek()" function and the "seek()" method on
   *file-like objects*, for whence to adjust the file position
   indicator.

   "SEEK_SET"
      Adjust the file position relative to the beginning of the file.

   "SEEK_CUR"
      Adjust the file position relative to the current file position.

   "SEEK_END"
      Adjust the file position relative to the end of the file.

   Their values are 0, 1, and 2, respectively.

os.SEEK_HOLE
os.SEEK_DATA

   Parameters to the "lseek()" function and the "seek()" method on
   *file-like objects*, for seeking file data and holes on sparsely
   allocated files.

   "SEEK_DATA"
      Adjust the file offset to the next location containing data,
      relative to the seek position.

   "SEEK_HOLE"
      Adjust the file offset to the next location containing a hole,
      relative to the seek position. A hole is defined as a sequence
      of zeros.

   참고:

     These operations only make sense for filesystems that support
     them.

   가용성: Linux >= 3.1, macOS, Unix

   Added in version 3.3.

os.open(path, flags, mode=0o777, *, dir_fd=None)

   파일 *path*를 열고 *flags* 에 따른 다양한 플래그와 때로 *mode* 따른
   모드를 설정합니다. *mode*를 계산할 때, 현재 umask 값으로 먼저 마스
   킹합니다. 새롭게 열린 파일의 파일 기술자를 돌려줍니다. 새 파일 기술
   자는 상속 불가능합니다.

   플래그와 모드 값에 대한 설명은, C 런타임 설명서를 참조하십시오; 플
   래그 상수("O_RDONLY" 와 "O_WRONLY"와 같은)는 "os" 모듈에 정의되어
   있습니다. 특히, 윈도우에서 바이너리 모드로 파일을 열려면 "O_BINARY"
   를 추가해야 합니다.

   이 함수는 *dir_fd* 매개 변수로 디렉터리 기술자에 상대적인 경로를 지
   원할 수 있습니다.

   "path", "mode", "flags"를 인자로 감사 이벤트(auditing event) "open"
   을 발생시킵니다.

   버전 3.4에서 변경: 새로운 파일 기술자는 이제 상속 불가능합니다.

   참고:

     이 함수는 저수준 I/O를 위한 것입니다. 일반적인 사용을 위해서는 내
     장 함수 "open()"을 사용하십시오, 이 함수는 "read()" 및 "write()"
     메서드(와 더 많은 메서드)가있는 *파일 객체*를 반환합니다. 파일 기
     술자를 파일 객체로 싸려면, "fdopen()"을 사용하십시오.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.5에서 변경: 시스템 호출이 인터럽트 되고 시그널 처리기가 예외
   를 발생시키지 않으면, 함수는 이제 "InterruptedError" 예외를 일으키
   는 대신 시스템 호출을 재시도합니다 (이유는 **PEP 475**를 참조하세요
   ).

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

다음 상수는 "open()" 함수에 대한 *flags* 매개 변수의 옵션입니다. 비트
별 OR 연산자 "|"를 사용하여 결합할 수 있습니다. 일부는 모든 플랫폼에서
사용할 수는 없습니다. 가용성과 사용에 대한 설명은 유닉스의 *open(2)*
매뉴얼 페이지 또는 윈도우의 MSDN을 참조하십시오.

os.O_RDONLY
os.O_WRONLY
os.O_RDWR
os.O_APPEND
os.O_CREAT
os.O_EXCL
os.O_TRUNC

   위의 상수는 유닉스 및 윈도우에서 사용할 수 있습니다.

os.O_DSYNC
os.O_RSYNC
os.O_SYNC
os.O_NDELAY
os.O_NONBLOCK
os.O_NOCTTY
os.O_CLOEXEC

   위의 상수는 유닉스에서만 사용할 수 있습니다.

   버전 3.3에서 변경: "O_CLOEXEC" 상수를 추가합니다.

os.O_BINARY
os.O_NOINHERIT
os.O_SHORT_LIVED
os.O_TEMPORARY
os.O_RANDOM
os.O_SEQUENTIAL
os.O_TEXT

   위의 상수는 윈도우에서만 사용할 수 있습니다.

os.O_EVTONLY
os.O_FSYNC
os.O_SYMLINK
os.O_NOFOLLOW_ANY

   The above constants are only available on macOS.

   버전 3.10에서 변경: Add "O_EVTONLY", "O_FSYNC", "O_SYMLINK" and
   "O_NOFOLLOW_ANY" constants.

os.O_ASYNC
os.O_DIRECT
os.O_DIRECTORY
os.O_NOFOLLOW
os.O_NOATIME
os.O_PATH
os.O_TMPFILE
os.O_SHLOCK
os.O_EXLOCK

   위의 상수는 확장이며 C 라이브러리에서 정의하지 않으면 존재하지 않습
   니다.

   버전 3.4에서 변경: 지원하는 시스템에 "O_PATH"를 추가합니다. 리눅스
   커널 3.11 이상에서만 사용 가능한 "O_TMPFILE"를 추가합니다.

os.openpty()

   새로운 의사 터미널 쌍을 엽니다. 파일 기술자의 쌍 "(master, slave)"
   를 반환하는데, 각각 pty와 tty 입니다. 새 파일 기술자는 상속 불가능
   합니다. (약간) 더 이식성 있는 접근 방식을 사용하려면, "pty" 모듈을
   사용하십시오.

   가용성: Unix, not WASI.

   버전 3.4에서 변경: 새로운 파일 기술자는 이제 상속 불가능합니다.

os.pipe()

   파이프를 만듭니다. 파일 기술자 쌍 "(r, w)" 를 반환하는데, 각각 읽기
   와 쓰기에 사용할 수 있습니다. 새 파일 기술자는 상속 불가능합니다.

   가용성: Unix, Windows.

   버전 3.4에서 변경: 새로운 파일 기술자는 이제 상속 불가능합니다.

os.pipe2(flags, /)

   *flags* 가 원자적으로 설정된 파이프를 만듭니다. *flags* 는 다음과
   같은 값들을 하나 이상 OR 해서 만들 수 있습니다: "O_NONBLOCK",
   "O_CLOEXEC". 파일 기술자 쌍 "(r, w)" 를 반환하는데, 각각 읽기와 쓰
   기에 사용할 수 있습니다.

   가용성: Unix, not WASI.

   Added in version 3.3.

os.posix_fallocate(fd, offset, len, /)

   *fd*로 지정된 파일이 *offset* 에서 시작하여 *len* 바이트 동안 계속
   되도록 충분한 디스크 공간을 할당합니다.

   가용성: Unix.

   Added in version 3.3.

os.posix_fadvise(fd, offset, len, advice, /)

   특정 패턴으로 데이터에 액세스하려는 의도를 알려 커널이 최적화할 수
   있도록 합니다. 조언(advice)은 *fd에* 의해 지정된 파일의 *offset* 에
   서 시작하여 *len* 바이트 동안 계속되는 영역에 적용됩니다. *advice*
   는 "POSIX_FADV_NORMAL", "POSIX_FADV_SEQUENTIAL",
   "POSIX_FADV_RANDOM", "POSIX_FADV_NOREUSE", "POSIX_FADV_WILLNEED" 또
   는 "POSIX_FADV_DONTNEED" 중 하나입니다.

   가용성: Unix.

   Added in version 3.3.

os.POSIX_FADV_NORMAL
os.POSIX_FADV_SEQUENTIAL
os.POSIX_FADV_RANDOM
os.POSIX_FADV_NOREUSE
os.POSIX_FADV_WILLNEED
os.POSIX_FADV_DONTNEED

   사용 가능성이 큰 액세스 패턴을 지정하는 "posix_fadvise()"의
   *advice* 에 사용될 수 있는 플래그.

   가용성: Unix.

   Added in version 3.3.

os.pread(fd, n, offset, /)

   파일 기술자 *fd*에서 *offset* 의 위치부터 최대 *n* 바이트를 읽어 들
   이고, 파일 오프셋은 변경되지 않은 채로 남겨 둡니다.

   읽어 들인 바이트를 포함하는 바이트열을 돌려줍니다. *fd* 에 의해 참
   조된 파일의 끝에 도달하면, 빈 바이트열 객체가 반환됩니다.

   가용성: Unix.

   Added in version 3.3.

os.posix_openpt(oflag, /)

   Open and return a file descriptor for a master pseudo-terminal
   device.

   Calls the C standard library function "posix_openpt()". The *oflag*
   argument is used to set file status flags and file access modes as
   specified in the manual page of "posix_openpt()" of your system.

   The returned file descriptor is non-inheritable. If the value
   "O_CLOEXEC" is available on the system, it is added to *oflag*.

   가용성: Unix, not WASI.

   Added in version 3.13.

os.preadv(fd, buffers, offset, flags=0, /)

   파일 기술자 *fd*에서 *offset* 위치부터 가변 *바이트열류 객체들*
   *buffers* 로 읽어 들이고, 파일 오프셋은 변경되지 않은 채로 남겨 둡
   니다. 데이터가 가득 찰 때까지 각 버퍼로 데이터를 전송한 다음 나머지
   데이터를 보관하기 위해 시퀀스의 다음 버퍼로 이동합니다.

   flags 인자는 다음 플래그 중 0개 이상의 비트별 OR를 포함합니다:

   * "RWF_HIPRI"

   * "RWF_NOWAIT"

   실제로 읽힌 총 바이트 수를 반환합니다. 이 값은 모든 객체의 총 용량
   보다 작을 수 있습니다.

   운영 체제는 사용할 수 있는 버퍼 수에 한계("sysconf()" 값
   "'SC_IOV_MAX'")를 설정할 수 있습니다.

   "os.readv()" 와 "os.pread()"의 기능을 결합합니다.

   가용성: Linux >= 2.6.30, FreeBSD >= 6.0, OpenBSD >= 2.7, AIX >=
   7.1.

   Using flags requires Linux >= 4.6.

   Added in version 3.7.

os.RWF_NOWAIT

   즉시 사용할 수 없는 데이터를 기다리지 않습니다. 이 플래그를 지정하
   면, 하부 저장 장치에서 데이터를 읽어야 하거나 록을 기다려야 할 때
   즉시 시스템 호출이 반환됩니다.

   If some data was successfully read, it will return the number of
   bytes read. If no bytes were read, it will return "-1" and set
   errno to "errno.EAGAIN".

   가용성: Linux >= 4.14.

   Added in version 3.7.

os.RWF_HIPRI

   우선순위가 높은 읽기/쓰기. 블록 기반 파일 시스템이 장치의 폴링을 사
   용할 수 있게 하여, 지연은 짧아 지지만, 추가 자원을 사용할 수 있습니
   다.

   현재, 리눅스에서, 이 기능은 "O_DIRECT" 플래그를 사용하여 열린 파일
   기술자에만 사용할 수 있습니다.

   가용성: Linux >= 4.6.

   Added in version 3.7.

os.ptsname(fd, /)

   Return the name of the slave pseudo-terminal device associated with
   the master pseudo-terminal device to which the file descriptor *fd*
   refers. The file descriptor *fd* is not closed upon failure.

   Calls the reentrant C standard library function "ptsname_r()" if it
   is available; otherwise, the C standard library function
   "ptsname()", which is not guaranteed to be thread-safe, is called.

   가용성: Unix, not WASI.

   Added in version 3.13.

os.pwrite(fd, str, offset, /)

   파일 기술자 *fd*의 *offset* 위치에 *str* 바이트열을 쓰고, 파일 오프
   셋은 변경되지 않은 채로 남겨 둡니다.

   실제로 쓴 바이트 수를 반환합니다.

   가용성: Unix.

   Added in version 3.3.

os.pwritev(fd, buffers, offset, flags=0, /)

   Write the *buffers* contents to file descriptor *fd* at an offset
   *offset*, leaving the file offset unchanged.  *buffers* must be a
   sequence of *bytes-like objects*. Buffers are processed in array
   order. Entire contents of the first buffer is written before
   proceeding to the second, and so on.

   flags 인자는 다음 플래그 중 0개 이상의 비트별 OR를 포함합니다:

   * "RWF_DSYNC"

   * "RWF_SYNC"

   * "RWF_APPEND"

   실제로 쓴 총 바이트 수를 반환합니다.

   운영 체제는 사용할 수 있는 버퍼 수에 한계("sysconf()" 값
   "'SC_IOV_MAX'")를 설정할 수 있습니다.

   "os.writev()" 와 "os.pwrite()"의 기능을 결합합니다.

   가용성: Linux >= 2.6.30, FreeBSD >= 6.0, OpenBSD >= 2.7, AIX >=
   7.1.

   Using flags requires Linux >= 4.6.

   Added in version 3.7.

os.RWF_DSYNC

   Provide a per-write equivalent of the "O_DSYNC" "os.open()" flag.
   This flag effect applies only to the data range written by the
   system call.

   가용성: Linux >= 4.7.

   Added in version 3.7.

os.RWF_SYNC

   Provide a per-write equivalent of the "O_SYNC" "os.open()" flag.
   This flag effect applies only to the data range written by the
   system call.

   가용성: Linux >= 4.7.

   Added in version 3.7.

os.RWF_APPEND

   Provide a per-write equivalent of the "O_APPEND" "os.open()" flag.
   This flag is meaningful only for "os.pwritev()", and its effect
   applies only to the data range written by the system call. The
   *offset* argument does not affect the write operation; the data is
   always appended to the end of the file. However, if the *offset*
   argument is "-1", the current file *offset* is updated.

   가용성: Linux >= 4.16.

   Added in version 3.10.

os.read(fd, n, /)

   파일 기술자 *fd*에서 최대 *n* 바이트를 읽습니다.

   읽어 들인 바이트를 포함하는 바이트열을 돌려줍니다. *fd* 에 의해 참
   조된 파일의 끝에 도달하면, 빈 바이트열 객체가 반환됩니다.

   참고:

     이 함수는 저수준 I/O를 위한 것이며 "os.open()" 이나 "pipe()"에 의
     해 반환된 파일 기술자에 적용되어야 합니다. 내장 함수 "open()" 이
     나 "popen()" 또는 "fdopen()"에 의해 반환된 "파일 객체"나
     "sys.stdin"을 읽으려면, 그것의 "read()" 나 "readline()" 메서드를
     사용하십시오.

   버전 3.5에서 변경: 시스템 호출이 인터럽트 되고 시그널 처리기가 예외
   를 발생시키지 않으면, 함수는 이제 "InterruptedError" 예외를 일으키
   는 대신 시스템 호출을 재시도합니다 (이유는 **PEP 475**를 참조하세요
   ).

os.readinto(fd, buffer, /)

   Read from a file descriptor *fd* into a mutable buffer object
   *buffer*.

   The *buffer* should be mutable and *bytes-like*. On success,
   returns the number of bytes read. Less bytes may be read than the
   size of the buffer. The underlying system call will be retried when
   interrupted by a signal, unless the signal handler raises an
   exception. Other errors will not be retried and an error will be
   raised.

   Returns 0 if *fd* is at end of file or if the provided *buffer* has
   length 0 (which can be used to check for errors without reading
   data). Never returns negative.

   참고:

     This function is intended for low-level I/O and must be applied
     to a file descriptor as returned by "os.open()" or "os.pipe()".
     To read a "file object" returned by the built-in function
     "open()", or "sys.stdin", use its member functions, for example
     "io.BufferedIOBase.readinto()", "io.BufferedIOBase.read()", or
     "io.TextIOBase.read()"

   Added in version 3.14.

os.sendfile(out_fd, in_fd, offset, count)
os.sendfile(out_fd, in_fd, offset, count, headers=(), trailers=(), flags=0)

   파일 기술자 *in_fd*에서 파일 기술자 *out_fd* 로 *offset*에서 시작하
   여 *count* 바이트를 복사합니다. 전송된 바이트 수를 반환합니다. EOF
   에 도달하면 "0"을 반환합니다.

   첫 번째 함수 서명은 "sendfile()"를 정의하는 모든 플랫폼에서 지원됩
   니다.

   리눅스에서, *offset*이 "None"으로 주어지면, *in_fd*의 현재 위치에서
   바이트를 읽고 *in_fd*의 위치가 갱신됩니다.

   The second case may be used on macOS and FreeBSD where *headers*
   and *trailers* are arbitrary sequences of buffers that are written
   before and after the data from *in_fd* is written. It returns the
   same as the first case.

   On macOS and FreeBSD, a value of "0" for *count* specifies to send
   until the end of *in_fd* is reached.

   모든 플랫폼은 *out_fd* 파일 기술자로 소켓을 지원하고, 일부 플랫폼은
   다른 유형(예를 들어 일반 파일, 파이프)들도 허락합니다.

   이기종 플랫폼 응용 프로그램은 *headers*, *trailers* 및 *flags* 인자
   를 사용해서는 안 됩니다.

   가용성: Unix, not WASI.

   참고:

     "sendfile()"의 고수준 래퍼는, "socket.socket.sendfile()"을 보십시
     오.

   Added in version 3.3.

   버전 3.9에서 변경: 매개 변수 *out*과 *in*의 이름이 *out_fd*와
   *in_fd*로 변경되었습니다.

os.SF_NODISKIO
os.SF_MNOWAIT
os.SF_SYNC

   구현이 지원하는 경우, "sendfile()" 함수에 대한 매개 변수입니다.

   가용성: Unix, not WASI.

   Added in version 3.3.

os.SF_NOCACHE

   Parameter to the "sendfile()" function, if the implementation
   supports it. The data won't be cached in the virtual memory and
   will be freed afterwards.

   가용성: Unix, not WASI.

   Added in version 3.11.

os.set_blocking(fd, blocking, /)

   지정된 파일 기술자의 블로킹 모드를 설정합니다. blocking이 "False"면
   "O_NONBLOCK" 플래그를 설정하고, 그렇지 않으면 플래그를 지웁니다.

   "get_blocking()"과 "socket.socket.setblocking()"도 참조하십시오.

   가용성: Unix, Windows.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

   On Windows, this function is limited to pipes.

   Added in version 3.5.

   버전 3.12에서 변경: Added support for pipes on Windows.

os.splice(src, dst, count, offset_src=None, offset_dst=None, flags=0)

   Transfer *count* bytes from file descriptor *src*, starting from
   offset *offset_src*, to file descriptor *dst*, starting from offset
   *offset_dst*.

   The splicing behaviour can be modified by specifying a *flags*
   value. Any of the following variables may used, combined using
   bitwise OR (the "|" operator):

   * If "SPLICE_F_MOVE" is specified, the kernel is asked to move
     pages instead of copying, but pages may still be copied if the
     kernel cannot move the pages from the pipe.

   * If "SPLICE_F_NONBLOCK" is specified, the kernel is asked to not
     block on I/O. This makes the splice pipe operations nonblocking,
     but splice may nevertheless block because the spliced file
     descriptors may block.

   * If "SPLICE_F_MORE" is specified, it hints to the kernel that more
     data will be coming in a subsequent splice.

   At least one of the file descriptors must refer to a pipe. If
   *offset_src* is "None", then *src* is read from the current
   position; respectively for *offset_dst*. The offset associated to
   the file descriptor that refers to a pipe must be "None". The files
   pointed to by *src* and *dst* must reside in the same filesystem,
   otherwise an "OSError" is raised with "errno" set to "errno.EXDEV".

   이 복사는 커널에서 사용자 공간으로 데이터를 전송한 다음 다시 커널로
   전송하는 추가 비용 없이 수행됩니다. 또한, 일부 파일 시스템은 추가
   최적화를 구현할 수 있습니다. 두 파일이 바이너리로 열린 것처럼 복사
   가 수행됩니다.

   Upon successful completion, returns the number of bytes spliced to
   or from the pipe. A return value of 0 means end of input. If *src*
   refers to a pipe, then this means that there was no data to
   transfer, and it would not make sense to block because there are no
   writers connected to the write end of the pipe.

   더 보기: The *splice(2)* man page.

   가용성: Linux >= 2.6.17 with glibc >= 2.5

   Added in version 3.10.

os.SPLICE_F_MOVE
os.SPLICE_F_NONBLOCK
os.SPLICE_F_MORE

   Added in version 3.10.

os.readv(fd, buffers, /)

   파일 기술자 *fd*에서 여러 가변 *바이트열류 객체* *buffers*로 읽어
   들입니다. 데이터가 가득 찰 때까지 각 버퍼로 데이터를 전송한 다음 나
   머지 데이터를 보관하기 위해 시퀀스의 다음 버퍼로 이동합니다.

   실제로 읽힌 총 바이트 수를 반환합니다. 이 값은 모든 객체의 총 용량
   보다 작을 수 있습니다.

   운영 체제는 사용할 수 있는 버퍼 수에 한계("sysconf()" 값
   "'SC_IOV_MAX'")를 설정할 수 있습니다.

   가용성: Unix.

   Added in version 3.3.

os.tcgetpgrp(fd, /)

   *fd*("os.open()"에 의해 반환된 것과 같은 열린 파일 기술자)에 의해
   주어진 터미널과 관련된 프로세스 그룹을 반환합니다.

   가용성: Unix, not WASI.

os.tcsetpgrp(fd, pg, /)

   *fd*("os.open()"에 의해 반환된 것과 같은 열린 파일 기술자)에 의해
   주어진 터미널과 관련된 프로세스 그룹을 *pg*로 설정합니다.

   가용성: Unix, not WASI.

os.ttyname(fd, /)

   파일 기술자 *fd*와 관련된 터미널 장치를 나타내는 문자열을 돌려줍니
   다. *fd* 가 터미널 장치와 연관되어 있지 않으면, 예외가 발생합니다.

   가용성: Unix.

os.unlockpt(fd, /)

   Unlock the slave pseudo-terminal device associated with the master
   pseudo-terminal device to which the file descriptor *fd* refers.
   The file descriptor *fd* is not closed upon failure.

   Calls the C standard library function "unlockpt()".

   가용성: Unix, not WASI.

   Added in version 3.13.

os.write(fd, str, /)

   *str* 바이트열을 파일 기술자 *fd* 에 씁니다.

   실제로 쓴 바이트 수를 반환합니다.

   참고:

     이 함수는 저수준 I/O를 위한 것이며 "os.open()" 이나 "pipe()"에 의
     해 반환된 파일 기술자에 적용되어야 합니다. 내장 함수 "open()" 이
     나 "popen()" 또는 "fdopen()"에 의해 반환된 "파일 객체"나
     "sys.stdout" 또는 "sys.stderr"에 쓰려면, 그것의 "write()" 메서드
     를 사용하십시오.

   버전 3.5에서 변경: 시스템 호출이 인터럽트 되고 시그널 처리기가 예외
   를 발생시키지 않으면, 함수는 이제 "InterruptedError" 예외를 일으키
   는 대신 시스템 호출을 재시도합니다 (이유는 **PEP 475**를 참조하세요
   ).

os.writev(fd, buffers, /)

   *buffers* 내용을 파일 기술자 *fd*에 씁니다. *buffers* 는 *바이트열
   류 객체*의 시퀀스 여야 합니다. 버퍼는 배열 순서로 처리됩니다. 첫 번
   째 버퍼의 전체 내용은 두 번째 버퍼로 진행하기 전에 기록되고, 같은
   식으로 계속 진행합니다.

   실제로 쓴 총 바이트 수를 반환합니다.

   운영 체제는 사용할 수 있는 버퍼 수에 한계("sysconf()" 값
   "'SC_IOV_MAX'")를 설정할 수 있습니다.

   가용성: Unix.

   Added in version 3.3.


터미널의 크기 조회하기
----------------------

Added in version 3.3.

os.get_terminal_size(fd=STDOUT_FILENO, /)

   터미널 창의 크기를 "(columns, lines)" 로 반환하는데,
   "terminal_size" 형의 튜플입니다.

   선택적 인자 "fd"(기본값 "STDOUT_FILENO", 즉 표준 출력)는 조회할 파
   일 기술자를 지정합니다.

   파일 기술자가 터미널에 연결되어 있지 않으면, "OSError"가 발생합니다
   .

   "shutil.get_terminal_size()"가 일반적으로 사용해야 하는 고수준 함수
   이며, "os.get_terminal_size"는 저수준 구현입니다.

   가용성: Unix, Windows.

class os.terminal_size

   터미널 창 크기 "(columns, lines)"를 저장하는 튜플의 서브 클래스.

   columns

      문자 단위의 터미널 창의 너비.

   lines

      문자 단위의 터미널 창의 높이.


파일 기술자의 상속
------------------

Added in version 3.4.

파일 기술자는 자식 프로세스가 파일 기술자를 상속받을 수 있는지를 나타
내는 "상속 가능" 플래그를 가지고 있습니다. 파이썬 3.4부터, 파이썬에 의
해 생성된 파일 기술자는 기본적으로 상속 불가능합니다.

유닉스에서는, 상속 불가능한 파일 기술자는 새 프로그램 실행 시 자식 프
로세스에서 닫히고, 다른 파일 기술자는 상속됩니다.

윈도우에서는, 항상 상속되는 표준 스트림(파일 기술자 0, 1, 2: stdin,
stdout, stderr)을 제외하고, 상속 불가능한 핸들 및 파일 기술자는 자식
프로세스에서 닫힙니다. "spawn*" 함수를 사용하면, 상속 가능한 모든 핸들
과 상속 가능한 모든 파일 기술자가 상속됩니다. "subprocess" 모듈을 사용
하면, 표준 스트림을 제외한 모든 파일 기술자가 닫히고, 상속 가능한 핸들
은 *close_fds* 매개 변수가 "False" 일 때만 상속됩니다.

On WebAssembly platforms, the file descriptor cannot be modified.

os.get_inheritable(fd, /)

   지정된 파일 기술자의 "상속 가능" 플래그를 가져옵니다 (논릿값).

os.set_inheritable(fd, inheritable, /)

   지정된 파일 기술자의 "상속 가능(inheritable)" 플래그를 설정합니다.

os.get_handle_inheritable(handle, /)

   지정된 핸들의 "상속 가능" 플래그를 가져옵니다 (논릿값).

   가용성: Windows.

os.set_handle_inheritable(handle, inheritable, /)

   지정된 핸들의 "상속 가능(inheritable)" 플래그를 설정합니다.

   가용성: Windows.


파일과 디렉터리
===============

일부 유닉스 플랫폼에서, 이 함수 중 많은 것들이 다음 기능 중 하나 이상
을 지원합니다:

* **specifying a file descriptor:** Normally the *path* argument
  provided to functions in the "os" module must be a string specifying
  a file path.  However, some functions now alternatively accept an
  open file descriptor for their *path* argument. The function will
  then operate on the file referred to by the descriptor. For POSIX
  systems, Python will call the variant of the function prefixed with
  "f" (e.g. call "fchdir" instead of "chdir").

  "os.supports_fd"를 사용하여, 여러분의 플랫폼에서 특정 함수에 파일 기
  술자로 *path*를 지정할 수 있는지를 확인할 수 있습니다. 사용할 수 없
  을 때, 사용하면 "NotImplementedError"를 발생시킵니다.

  함수가 *dir_fd* 나 *follow_symlinks* 인자도 지원하면, *path* 에 파일
  기술자를 제공할 때, 이 중 하나를 지정하는 것은 에러입니다.

* **paths relative to directory descriptors:** If *dir_fd* is not
  "None", it should be a file descriptor referring to a directory, and
  the path to operate on should be relative; path will then be
  relative to that directory.  If the path is absolute, *dir_fd* is
  ignored.  For POSIX systems, Python will call the variant of the
  function with an "at" suffix and possibly prefixed with "f" (e.g.
  call "faccessat" instead of "access").

  "os.supports_dir_fd"를 사용하여, 여러분의 플랫폼에서 특정 함수에
  *dir_fd*가 지원되는지를 확인할 수 있습니다. 사용할 수 없을 때, 사용
  하면 "NotImplementedError"를 발생시킵니다.

* **not following symlinks:** If *follow_symlinks* is "False", and the
  last element of the path to operate on is a symbolic link, the
  function will operate on the symbolic link itself rather than the
  file pointed to by the link.  For POSIX systems, Python will call
  the "l..." variant of the function.

  "os.supports_follow_symlinks"를 사용하여, 여러분의 플랫폼에서 특정
  함수에 *follow_symlinks*가 지원되는지를 확인할 수 있습니다. 사용할
  수 없을 때, 사용하면 "NotImplementedError"를 발생시킵니다.

os.access(path, mode, *, dir_fd=None, effective_ids=False, follow_symlinks=True)

   실제(real) uid/gid를 사용해서 *path*를 액세스할 수 있는지 검사합니
   다. 대부분의 연산은 유효한(effective) uid/gid를 사용할 것이므로, 이
   함수는 suid/sgid 환경에서 호출하는 사용자가 지정된 *path* 에 대한
   액세스 권한이 있는지 검사하는데 사용할 수 있습니다. *path*가 존재하
   는지를 검사하려면 *mode* 는 "F_OK" 여야 하며, 권한을 검사하려면 하
   나 이상의 "R_OK", "W_OK" 및 "X_OK"를 OR 값일 수 있습니다. 액세스가
   허용되면 "True"를 반환하고, 그렇지 않으면 "False"를 반환합니다. 더
   자세한 정보는 유닉스 매뉴얼 페이지 *access(2)*를 참조하십시오.

   이 함수는 디렉터리 기술자에 상대적인 경로 와 심볼릭 링크를 따르지
   않음을 지원할 수 있습니다.

   *effective_ids* 가 "True"면, "access()"는 실제(real) uid/gid 대신
   유효한(effective) uid/gid를 사용하여 액세스 검사를 수행합니다.
   *effective_ids* 는 플랫폼에서 지원되지 않을 수 있습니다;
   "os.supports_effective_ids"를 사용하여, 사용할 수 있는지를 확인할
   수 있습니다. 사용할 수 없을 때, 사용하면 "NotImplementedError"를 발
   생시킵니다.

   참고:

     예를 들어, 실제로 "open()"를 사용하여 파일을 열기 전에,
     "access()"를 사용하여 파일을 여는 권한이 있는지 확인하는 것은 보
     안 구멍을 만듭니다. 사용자가 파일을 확인하고 조작을 위해 열기 사
     이의 짧은 시간 간격을 악용할 수 있기 때문입니다. *EAFP* 기법을 사
     용하는 것이 좋습니다. 예를 들면:

        if os.access("myfile", os.R_OK):
            with open("myfile") as fp:
                return fp.read()
        return "some default data"

     는 다음과 같이 쓰는 것이 더 좋습니다:

        try:
            fp = open("myfile")
        except PermissionError:
            return "some default data"
        else:
            with fp:
                return fp.read()

   참고:

     "access()"가 성공할 것임을 알릴 때도, I/O 연산이 실패할 수 있습니
     다. 특히 일반적인 POSIX 권한 비트 모델을 넘어서는 권한 의미가 있
     을 수 있는 네트워크 파일 시스템에 대한 연산에서 그럴 수 있습니다.

   버전 3.3에서 변경: *dir_fd*, *effective_ids* 및 *follow_symlinks*
   매개 변수를 추가했습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.F_OK
os.R_OK
os.W_OK
os.X_OK

   *path* 의 존재 여부, 읽기 가능성, 쓰기 가능성 및 실행 가능성을 검사
   하기 위해, "access()"의 *mode* 매개 변수로 전달할 값입니다.

os.chdir(path)

   현재 작업 디렉터리를 *path*로 변경합니다.

   이 함수는 파일 기술자 지정을 지원할 수 있습니다. 기술자는 열려있는
   파일이 아니라, 열려있는 디렉터리를 참조해야 합니다.

   이 함수는 "OSError"와 "FileNotFoundError", "PermissionError" 및
   "NotADirectoryError"와 같은 서브 클래스를 발생시킬 수 있습니다.

   "path"를 인자로 감사 이벤트(auditing event) "os.chdir"을 발생시킵니
   다.

   버전 3.3에서 변경: 일부 플랫폼에서 *path* 를 파일 기술자로 지정하는
   지원이 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.chflags(path, flags, *, follow_symlinks=True)

   *path* 의 플래그를 숫자 *flags*로 설정합니다. *flags*는 다음 값들
   ("stat" 모듈에 정의된 대로)의 조합(비트별 OR)을 취할 수 있습니다:

   * "stat.UF_NODUMP"

   * "stat.UF_IMMUTABLE"

   * "stat.UF_APPEND"

   * "stat.UF_OPAQUE"

   * "stat.UF_NOUNLINK"

   * "stat.UF_COMPRESSED"

   * "stat.UF_HIDDEN"

   * "stat.SF_ARCHIVED"

   * "stat.SF_IMMUTABLE"

   * "stat.SF_APPEND"

   * "stat.SF_NOUNLINK"

   * "stat.SF_SNAPSHOT"

   이 함수는 심볼릭 링크를 따르지 않음을 지원할 수 있습니다.

   "path", "flags"를 인자로 감사 이벤트(auditing event) "os.chflags"를
   발생시킵니다.

   가용성: Unix, not WASI.

   버전 3.3에서 변경: Added the *follow_symlinks* parameter.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.chmod(path, mode, *, dir_fd=None, follow_symlinks=True)

   *path*의 모드를 숫자 *mode*로 변경합니다. *mode* 는 다음 값들
   ("stat" 모듈에 정의된 대로)이나 이들의 비트별 OR 조합을 취할 수 있
   습니다:

   * "stat.S_ISUID"

   * "stat.S_ISGID"

   * "stat.S_ENFMT"

   * "stat.S_ISVTX"

   * "stat.S_IREAD"

   * "stat.S_IWRITE"

   * "stat.S_IEXEC"

   * "stat.S_IRWXU"

   * "stat.S_IRUSR"

   * "stat.S_IWUSR"

   * "stat.S_IXUSR"

   * "stat.S_IRWXG"

   * "stat.S_IRGRP"

   * "stat.S_IWGRP"

   * "stat.S_IXGRP"

   * "stat.S_IRWXO"

   * "stat.S_IROTH"

   * "stat.S_IWOTH"

   * "stat.S_IXOTH"

   이 함수는 파일 기술자 지정, 디렉터리 기술자에 상대적인 경로 및 심볼
   릭 링크를 따르지 않음을 지원할 수 있습니다.

   참고:

     Although Windows supports "chmod()", you can only set the file's
     read-only flag with it (via the "stat.S_IWRITE" and
     "stat.S_IREAD" constants or a corresponding integer value).  All
     other bits are ignored. The default value of *follow_symlinks* is
     "False" on Windows.The function is limited on WASI, see 웹어셈블
     리 플랫폼 for more information.

   "path", "mode", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chmod"를 발생시킵니다.

   버전 3.3에서 변경: *path*를 열린 파일 기술자로 지정하는 지원과
   *dir_fd* 및 *follow_symlinks* 인자가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.13에서 변경: Added support for a file descriptor and the
   *follow_symlinks* argument on Windows.

os.chown(path, uid, gid, *, dir_fd=None, follow_symlinks=True)

   *path* 의 소유자와 그룹 ID를 숫자 *uid* 와 *gid*로 변경합니다. ID
   중 하나를 변경하지 않으려면, 그것을 -1로 설정하십시오.

   이 함수는 파일 기술자 지정, 디렉터리 기술자에 상대적인 경로 및 심볼
   릭 링크를 따르지 않음을 지원할 수 있습니다.

   숫자 ID 이외에 이름을 허용하는 고수준 함수는 "shutil.chown()"를 참
   조하십시오.

   "path", "uid", "gid", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chown"을 발생시킵니다.

   가용성: Unix.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

   버전 3.3에서 변경: *path*를 열린 파일 기술자로 지정하는 지원과
   *dir_fd* 및 *follow_symlinks* 인자가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 지원합니다.

os.chroot(path)

   현재 프로세스의 루트 디렉터리를 *path*로 변경합니다.

   가용성: Unix, not WASI, not Android.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.fchdir(fd)

   현재 작업 디렉터리를 파일 기술자 *fd*가 나타내는 디렉터리로 변경합
   니다. 기술자는 열려있는 파일이 아니라 열려있는 디렉터리를 참조해야
   합니다. 파이썬 3.3부터는, "os.chdir(fd)"와 같습니다.

   "path"를 인자로 감사 이벤트(auditing event) "os.chdir"을 발생시킵니
   다.

   가용성: Unix.

os.getcwd()

   현재 작업 디렉터리를 나타내는 문자열을 반환합니다.

os.getcwdb()

   현재 작업 디렉터리를 나타내는 바이트열을 반환합니다.

   버전 3.8에서 변경: 이 함수는 이제 윈도우에서 ANSI 코드 페이지가 아
   닌 UTF-8 인코딩을 사용합니다: 이유는 **PEP 529**를 참조하십시오. 이
   함수는 윈도우에서 더는 폐지되지 않습니다.

os.lchflags(path, flags)

   *path* 의 플래그를, "chflags()" 처럼, 숫자 *flags*로 설정하지만, 심
   볼릭 링크를 따르지 않습니다. 파이썬 3.3부터는, "os.chflags(path,
   flags, follow_symlinks=False)"와 같습니다.

   "path", "flags"를 인자로 감사 이벤트(auditing event) "os.chflags"를
   발생시킵니다.

   가용성: Unix, not WASI.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.lchmod(path, mode)

   *path* 모드를 숫자 *mode*로 변경합니다. path가 심볼릭 링크면, 이 함
   수는 타깃이 아닌 심볼릭 링크에 영향을 미칩니다. *mode*의 가능한 값
   은 "chmod()" 문서를 참조하십시오. 파이썬 3.3부터는, "os.chmod(path,
   mode, follow_symlinks=False)"와 같습니다.

   "lchmod()" is not part of POSIX, but Unix implementations may have
   it if changing the mode of symbolic links is supported.

   "path", "mode", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chmod"를 발생시킵니다.

   가용성: Unix, Windows, not Linux, FreeBSD >= 1.3, NetBSD >= 1.3,
   not OpenBSD

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.13에서 변경: Added support on Windows.

os.lchown(path, uid, gid)

   *path* 의 소유자와 그룹 ID를 숫자 *uid* 와 *gid*로 변경합니다. 이
   함수는 심볼릭 링크를 따르지 않습니다. 파이썬 3.3부터는,
   "os.chown(path, uid, gid, follow_symlinks=False)"와 같습니다.

   "path", "uid", "gid", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.chown"을 발생시킵니다.

   가용성: Unix.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.link(src, dst, *, src_dir_fd=None, dst_dir_fd=None, follow_symlinks=True)

   *src*를 가리키는 *dst* 라는 이름의 하드 링크를 만듭니다.

   This function can support specifying *src_dir_fd* and/or
   *dst_dir_fd* to supply paths relative to directory descriptors, and
   not following symlinks. The default value of *follow_symlinks* is
   "False" on Windows.

   "src", "dst", "src_dir_fd", "dst_dir_fd"를 인자로 감사 이벤트
   (auditing event) "os.link"를 발생시킵니다.

   가용성: Unix, Windows.

   버전 3.2에서 변경: 윈도우 지원이 추가되었습니다.

   버전 3.3에서 변경: Added the *src_dir_fd*, *dst_dir_fd*, and
   *follow_symlinks* parameters.

   버전 3.6에서 변경: *src* 및 *dst*로 *경로류 객체*를 받아들입니다.

os.listdir(path='.')

   *path*에 의해 주어진 디렉터리에 있는 항목들의 이름을 담고 있는 리스
   트를 반환합니다. 리스트는 임의의 순서로 나열되며, 디렉터리에 존재하
   더라도 특수 항목 "'.'" 과 "'..'"는 포함하지 않습니다. 이 함수 호출
   중에 디렉터리에서 파일이 제거되거나 추가되면, 해당 파일의 이름이 포
   함되는지는 지정되지 않습니다.

   *path*는 *경로류 객체* 일 수 있습니다. *path* 가 "bytes" 형이면 (직
   접 또는 "PathLike" 인터페이스를 통해 간접적으로), 반환되는 파일명도
   "bytes" 형입니다; 다른 모든 상황에서는 형 "str"이 됩니다.

   이 함수는 또한 파일 기술자 지정을 지원할 수 있습니다; 파일 기술자는
   디렉터리를 참조해야 합니다.

   "path"를 인자로 감사 이벤트(auditing event) "os.listdir"을 발생시킵
   니다.

   참고:

     "str" 파일명을 "bytes"로 인코딩하려면, "fsencode()"를 사용하십시
     오.

   더 보기:

     "scandir()" 함수는 파일 어트리뷰트 정보와 함께 디렉터리 항목을 반
     환하므로, 많은 일반적인 사용 사례에서 더 나은 성능을 제공합니다.

   버전 3.2에서 변경: *path* 매개 변수는 선택 사항이 되었습니다.

   버전 3.3에서 변경: *path*에 열린 파일 기술자를 지정하는 지원이 추가
   되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.listdrives()

   Return a list containing the names of drives on a Windows system.

   A drive name typically looks like "'C:\\'". Not every drive name
   will be associated with a volume, and some may be inaccessible for
   a variety of reasons, including permissions, network connectivity
   or missing media. This function does not test for access.

   May raise "OSError" if an error occurs collecting the drive names.

   Raises an auditing event "os.listdrives" with no arguments.

   가용성: Windows

   Added in version 3.12.

os.listmounts(volume)

   Return a list containing the mount points for a volume on a Windows
   system.

   *volume* must be represented as a GUID path, like those returned by
   "os.listvolumes()". Volumes may be mounted in multiple locations or
   not at all. In the latter case, the list will be empty. Mount
   points that are not associated with a volume will not be returned
   by this function.

   The mount points return by this function will be absolute paths,
   and may be longer than the drive name.

   Raises "OSError" if the volume is not recognized or if an error
   occurs collecting the paths.

   Raises an auditing event "os.listmounts" with argument "volume".

   가용성: Windows

   Added in version 3.12.

os.listvolumes()

   Return a list containing the volumes in the system.

   Volumes are typically represented as a GUID path that looks like
   "\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\". Files can
   usually be accessed through a GUID path, permissions allowing.
   However, users are generally not familiar with them, and so the
   recommended use of this function is to retrieve mount points using
   "os.listmounts()".

   May raise "OSError" if an error occurs collecting the volumes.

   Raises an auditing event "os.listvolumes" with no arguments.

   가용성: Windows

   Added in version 3.12.

os.lstat(path, *, dir_fd=None)

   Perform the equivalent of an "lstat()" system call on the given
   path. Similar to "stat()", but does not follow symbolic links.
   Return a "stat_result" object.

   심볼릭 링크를 지원하지 않는 플랫폼에서, 이 함수는 "stat()"의 별칭입
   니다.

   파이썬 3.3부터는, "os.stat(path, dir_fd=dir_fd,
   follow_symlinks=False)"와 같습니다.

   이 기능은 디렉터리 기술자에 상대적인 경로도 지원할 수 있습니다.

   더 보기: "stat()" 함수.

   버전 3.2에서 변경: 윈도우 6.0 (Vista) 심볼릭 링크에 대한 지원이 추
   가되었습니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.8에서 변경: 윈도우에서, 이제 심볼릭 링크와 디렉터리 정션
   (directory junction)을 포함하는 다른 경로를 나타내는 재해석 지점
   (reparse point, 이름 서로게이트)을 엽니다. 다른 유형의 재해석 지점
   은 운영 체제에서 "stat()"에서 처럼 결정됩니다.

os.mkdir(path, mode=0o777, *, dir_fd=None)

   숫자 모드 *mode*로 *path* 라는 디렉터리를 만듭니다.

   If the directory already exists, "FileExistsError" is raised. If a
   parent directory in the path does not exist, "FileNotFoundError" is
   raised.

   일부 시스템에서는, *mode*가 무시됩니다. 모드가 사용될 때, 현재
   umask 값으로 먼저 마스킹합니다. 마지막 9비트 (즉, *mode* 의 8진 표
   현의 마지막 3자리 수) 이외의 비트가 설정되면, 그 의미는 플랫폼에 따
   라 다릅니다. 일부 플랫폼에서는, 이것들이 무시되며, 설정하려면 명시
   적으로 "chmod()"를 호출해야 합니다.

   On Windows, a *mode* of "0o700" is specifically handled to apply
   access control to the new directory such that only the current user
   and administrators have access. Other values of *mode* are ignored.

   이 기능은 디렉터리 기술자에 상대적인 경로도 지원할 수 있습니다.

   임시 디렉터리를 만들 수도 있습니다; "tempfile" 모듈의
   "tempfile.mkdtemp()" 함수를 참조하십시오.

   "path", "mode", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.mkdir"을 발생시킵니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.13에서 변경: Windows now handles a *mode* of "0o700".

os.makedirs(name, mode=0o777, exist_ok=False)

   재귀적 디렉터리 생성 함수. "mkdir()"와 비슷하지만, 말단 디렉터리를
   포함하는 데 필요한 모든 중간 수준 디렉터리들을 만듭니다.

   The *mode* parameter is passed to "mkdir()" for creating the leaf
   directory; see the mkdir() description for how it is interpreted.
   To set the file permission bits of any newly created parent
   directories you can set the umask before invoking "makedirs()".
   The file permission bits of existing parent directories are not
   changed.

   If *exist_ok* is "False" (the default), a "FileExistsError" is
   raised if the target directory already exists.

   참고:

     "makedirs()"는 생성할 경로 요소에 "pardir"(예를 들어, 유닉스 시스
     템의 경우 "..")이 포함되어 있으면 혼란해 할 수 있습니다.

   이 함수는 UNC 경로를 올바르게 처리합니다.

   "path", "mode", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.mkdir"을 발생시킵니다.

   버전 3.2에서 변경: Added the *exist_ok* parameter.

   버전 3.4.1에서 변경: 파이썬 3.4.1 이전에는, *exist_ok* 가 "True"이
   고 디렉터리가 존재한다면, *mode* 가 기존 디렉터리의 모드와 일치하지
   않을 때, "makedirs()"는 여전히 에러를 발생시킵니다. 이 동작은 안전
   하게 구현할 수 없으므로, 파이썬 3.4.1에서 제거되었습니다. bpo-21082
   를 참조하십시오.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.7에서 변경: The *mode* argument no longer affects the file
   permission bits of newly created intermediate-level directories.

os.mkfifo(path, mode=0o666, *, dir_fd=None)

   숫자 모드 *mode*로 *path* 라는 이름의 FIFO(이름있는 파이프)를 만듭
   니다. 현재 umask 값으로 먼저 모드를 마스킹합니다.

   이 기능은 디렉터리 기술자에 상대적인 경로도 지원할 수 있습니다.

   FIFO는 일반 파일처럼 액세스할 수 있는 파이프입니다. FIFO는 삭제될
   때까지 존재합니다 (예를 들어 "os.unlink()"로). 일반적으로, FIFO는 "
   클라이언트"와 "서버" 유형 프로세스 사이에서 랑데부로 사용됩니다: 서
   버는 FIFO를 읽기 용도로 열고, 클라이언트는 쓰기 용도로 엽니다.
   "mkfifo()"가 FIFO를 열지는 않는다는 점에 유의하십시오 --- 단지 랑데
   부 포인트를 생성합니다.

   가용성: Unix, not WASI.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.mknod(path, mode=0o600, device=0, *, dir_fd=None)

   *path* 라는 이름의 파일 시스템 노드(파일, 장치 특수 파일 또는 이름
   있는 파이프)를 만듭니다. *mode* 는 사용 권한과 생성될 노드의 유형을
   모두 지정하며, "stat.S_IFREG", "stat.S_IFCHR", "stat.S_IFBLK" 및
   "stat.S_IFIFO" 중 하나와 결합(비트별 OR)합니다 (이 상수들은 "stat"
   에 있습니다). "stat.S_IFCHR"와 "stat.S_IFBLK"의 경우, *device* 는
   새로 만들어지는 장치 특수 파일(아마도 "os.makedev()"를 사용해서)을
   정의합니다, 그렇지 않으면 무시됩니다.

   이 기능은 디렉터리 기술자에 상대적인 경로도 지원할 수 있습니다.

   가용성: Unix, not WASI.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.major(device, /)

   Extract the device major number from a raw device number (usually
   the "st_dev" or "st_rdev" field from "stat").

os.minor(device, /)

   Extract the device minor number from a raw device number (usually
   the "st_dev" or "st_rdev" field from "stat").

os.makedev(major, minor, /)

   주 장치 번호와 부 장치 번호로 원시 장치 번호를 조립합니다.

os.pathconf(path, name)

   이름있는 파일과 관련된 시스템 구성 정보를 반환합니다. *name* 은 조
   회할 구성 값을 지정합니다; 정의된 시스템 값의 이름인 문자열일 수 있
   습니다; 이 이름은 여러 표준(POSIX.1, 유닉스 95, 유닉스 98 및 기타)
   에서 지정됩니다. 일부 플랫폼은 추가적인 이름도 정의합니다. 호스트
   운영 체제에 알려진 이름은 "pathconf_names" 딕셔너리에서 제공됩니다.
   이 매핑에 포함되지 않은 구성 변수를 위해, *name*에 정수를 전달하는
   것도 허용됩니다.

   *name* 이 문자열이고 알 수 없으면, "ValueError"가 발생합니다.
   *name*에 대한 특정 값이 호스트 시스템에서 지원되지 않으면,
   "pathconf_names"에 포함되어 있어도, 에러 번호가 "errno.EINVAL"인
   "OSError"가 발생합니다.

   이 함수는 파일 기술자 지정을 지원할 수 있습니다.

   가용성: Unix.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.pathconf_names

   "pathconf()"와 "fpathconf()"가 받아들이는 이름을 호스트 운영 체제에
   서 해당 이름에 대해 정의된 정숫값으로 매핑하는 딕셔너리. 이것은 시
   스템에 알려진 이름 집합을 판별하는 데 사용될 수 있습니다.

   가용성: Unix.

os.readlink(path, *, dir_fd=None)

   심볼릭 링크가 가리키는 경로를 나타내는 문자열을 반환합니다. 결과는
   절대 또는 상대 경로명일 수 있습니다; 상대 경로이면
   "os.path.join(os.path.dirname(path), result)"를 사용하여 절대 경로
   명으로 변환할 수 있습니다.

   *path* 가 (직접 또는 "PathLike" 인터페이스를 통해 간접적으로) 문자
   열 객체면, 결과도 문자열 객체가 되고, 호출은 UnicodeDecodeError를
   발생시킬 수 있습니다. *path* 가 (직접 또는 간접적으로) 바이트열 객
   체면, 결과는 바이트열 객체가 됩니다.

   이 기능은 디렉터리 기술자에 상대적인 경로도 지원할 수 있습니다.

   링크를 포함할 수 있는 경로를 결정(resolve)하려고 할 때,
   "realpath()"를 사용하여 재귀와 플랫폼 차이를 올바르게 처리하십시오.

   가용성: Unix, Windows.

   버전 3.2에서 변경: 윈도우 6.0 (Vista) 심볼릭 링크에 대한 지원이 추
   가되었습니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: 유닉스에서 *경로류 객체*를 받아들입니다.

   버전 3.8에서 변경: 윈도우에서 *경로류 객체*와 바이트열 객체를 받아
   들입니다.디렉터리 정션(directory junction)에 대한 지원이 추가되었고
   , 이전에 반환되던 선택적 "print name" 필드 대신 치환 경로(일반적으
   로 "\\?\" 접두사를 포함합니다)를 반환하도록 변경되었습니다.

os.remove(path, *, dir_fd=None)

   Remove (delete) the file *path*.  If *path* is a directory, an
   "OSError" is raised.  Use "rmdir()" to remove directories. If the
   file does not exist, a "FileNotFoundError" is raised.

   이 함수는 디렉터리 기술자에 상대적인 경로를 지원할 수 있습니다.

   윈도우에서, 사용 중인 파일을 제거하려고 시도하면 예외가 발생합니다;
   유닉스에서는 디렉터리 항목이 제거되지만, 원본 파일이 더는 사용되지
   않을 때까지 파일에 할당된 저장 공간을 사용할 수 없습니다.

   이 함수는 의미 적으로 "unlink()"와 같습니다.

   "path", "dir_fd"를 인자로 감사 이벤트(auditing event) "os.remove"를
   발생시킵니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.removedirs(name)

   재귀적으로 디렉터리를 제거합니다. "rmdir()" 처럼 동작하는데 다음과
   같은 차이가 있습니다. 말단 디렉터리가 성공적으로 제거되면,
   "removedirs()"는 에러가 발생할 때까지 *path*에 언급된 모든 상위 디
   렉터리를 연속적으로 제거하려고 합니다 (에러는 무시되는데, 이는 일반
   적으로 부모 디렉터리가 비어 있음을 뜻하기 때문입니다). 예를 들어,
   "os.removedirs('foo/bar/baz')"는 먼저 "'foo/bar/baz'" 디렉터리를 제
   거한 다음, "'foo/bar'" 및 "'foo'"가 비어 있으면 제거합니다. 말단 디
   렉터리를 성공적으로 제거할 수 없으면, "OSError"를 발생시킵니다.

   "path", "dir_fd"를 인자로 감사 이벤트(auditing event) "os.remove"를
   발생시킵니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.rename(src, dst, *, src_dir_fd=None, dst_dir_fd=None)

   파일 또는 디렉터리 *src*의 이름을 *dst*로 바꿉니다. *dst*가 존재하
   면, 많은 경우에 "OSError" 서브 클래스로 연산이 실패합니다:

   On Windows, if *dst* exists a "FileExistsError" is always raised.
   The operation may fail if *src* and *dst* are on different
   filesystems. Use "shutil.move()" to support moves to a different
   filesystem.

   On Unix, if *src* is a file and *dst* is a directory or vice-versa,
   an "IsADirectoryError" or a "NotADirectoryError" will be raised
   respectively.  If both are directories and *dst* is empty, *dst*
   will be silently replaced.  If *dst* is a non-empty directory, an
   "OSError" is raised. If both are files, *dst* will be replaced
   silently if the user has permission.  The operation may fail on
   some Unix flavors if *src* and *dst* are on different filesystems.
   If successful, the renaming will be an atomic operation (this is a
   POSIX requirement).

   이 함수는 디렉터리 기술자에 상대적인 경로를 제공하도록 *src_dir_fd*
   와/나 *dst_dir_fd* 를 지정하는 것을 지원할 수 있습니다.

   플랫폼에 무관하게 대상을 덮어쓰길 원하면, "replace()"를 사용하십시
   오.

   "src", "dst", "src_dir_fd", "dst_dir_fd"를 인자로 감사 이벤트
   (auditing event) "os.rename"을 발생시킵니다.

   버전 3.3에서 변경: Added the *src_dir_fd* and *dst_dir_fd*
   parameters.

   버전 3.6에서 변경: *src* 및 *dst*로 *경로류 객체*를 받아들입니다.

os.renames(old, new)

   재귀적 디렉터리 또는 파일 이름 바꾸기 함수. "rename()"처럼 작동하지
   만, 새 경로명이 유효하도록 만들기 위해 먼저 필요한 중간 디렉터리를
   만드는 점이 다릅니다. 이름을 변경한 후에는, 이전 이름의 가장 오른쪽
   경로 세그먼트에 해당하는 디렉터리를 "removedirs()"를 사용하여 제거
   합니다.

   참고:

     이 함수는 말단 디렉터리나 파일을 제거하는 데 필요한 권한이 없을
     때, 새 디렉터리 구조를 만든 상태에서 실패할 수 있습니다.

   "src", "dst", "src_dir_fd", "dst_dir_fd"를 인자로 감사 이벤트
   (auditing event) "os.rename"을 발생시킵니다.

   버전 3.6에서 변경: *old* 와 *new* 에 *경로류 객체*를 받아들입니다.

os.replace(src, dst, *, src_dir_fd=None, dst_dir_fd=None)

   Rename the file or directory *src* to *dst*.  If *dst* is a non-
   empty directory, "OSError" will be raised.  If *dst* exists and is
   a file, it will be replaced silently if the user has permission.
   The operation may fail if *src* and *dst* are on different
   filesystems.  If successful, the renaming will be an atomic
   operation (this is a POSIX requirement).

   이 함수는 디렉터리 기술자에 상대적인 경로를 제공하도록 *src_dir_fd*
   와/나 *dst_dir_fd* 를 지정하는 것을 지원할 수 있습니다.

   "src", "dst", "src_dir_fd", "dst_dir_fd"를 인자로 감사 이벤트
   (auditing event) "os.rename"을 발생시킵니다.

   Added in version 3.3.

   버전 3.6에서 변경: *src* 및 *dst*로 *경로류 객체*를 받아들입니다.

os.rmdir(path, *, dir_fd=None)

   Remove (delete) the directory *path*.  If the directory does not
   exist or is not empty, a "FileNotFoundError" or an "OSError" is
   raised respectively.  In order to remove whole directory trees,
   "shutil.rmtree()" can be used.

   이 함수는 디렉터리 기술자에 상대적인 경로를 지원할 수 있습니다.

   "path", "dir_fd"를 인자로 감사 이벤트(auditing event) "os.rmdir"을
   발생시킵니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.scandir(path='.')

   *path*로 지정된 디렉터리 내의 항목에 대응하는 "os.DirEntry" 객체의
   이터레이터를 돌려줍니다. 항목은 임의의 순서로 제공되며, 특수 항목
   "'.'" 및 "'..'"는 포함되지 않습니다. 이터레이터를 만든 후에 디렉터
   리에서 파일이 제거되거나 추가되면, 해당 파일의 항목이 포함되는지는
   지정되지 않습니다.

   "listdir()" 대신 "scandir()"를 사용하면, 디렉터리를 검색할 때 운영
   체제가 제공한다면 "os.DirEntry" 객체가 파일 유형과 파일 어트리뷰트
   정보를 제공하기 때문에, 이것들이 필요한 코드의 성능을 크게 개선할
   수 있습니다. 모든 "os.DirEntry" 메서드가 시스템 호출을 수행할 수 있
   지만, 일반적으로 "is_dir()" 및 "is_file()"는 심볼릭 링크에 대해서만
   시스템 호출을 요구합니다; "os.DirEntry.stat()"는 유닉스에서 항상 시
   스템 호출을 요구하지만 윈도우에서는 심볼릭 링크에 대해서만 시스템
   호출을 요구합니다.

   *path* 는 *경로류 객체* 일 수 있습니다. *path* 가 (직접 또는
   "PathLike" 인터페이스를 통해 간접적으로) "bytes" 형이면, 각
   "os.DirEntry"의 "name" 및 "path" 어트리뷰트의 형은 "bytes"입니다.
   다른 모든 상황에서는 형 "str"이 됩니다.

   이 함수는 또한 파일 기술자 지정을 지원할 수 있습니다; 파일 기술자는
   디렉터리를 참조해야 합니다.

   "path"를 인자로 감사 이벤트(auditing event) "os.scandir"을 발생시킵
   니다.

   "scandir()" 이터레이터는 *컨텍스트 관리자* 프로토콜을 지원하고 다음
   과 같은 메서드를 제공합니다:

   scandir.close()

      이터레이터를 닫고 확보한 자원을 반납합니다.

      이터레이터가 소진되거나 가비지 수집될 때 또는 이터레이션 중에 에
      러가 발생하면 자동으로 호출됩니다. 하지만 명시적으로 호출하거나
      "with" 문을 사용하는 것이 좋습니다.

      Added in version 3.6.

   다음 예제는 주어진 *path*의 "'.'"로 시작하지 않는 모든 파일(디렉터
   리 제외)을 표시하기 위한 "scandir()"의 간단한 사용을 보여줍니다.
   "entry.is_file()" 호출은 일반적으로 추가 시스템 호출을 하지 않습니
   다:

      with os.scandir(path) as it:
          for entry in it:
              if not entry.name.startswith('.') and entry.is_file():
                  print(entry.name)

   참고:

     On Unix-based systems, "scandir()" uses the system's opendir()
     and readdir() functions. On Windows, it uses the Win32
     FindFirstFileW and FindNextFileW functions.

   Added in version 3.5.

   버전 3.6에서 변경: Added support for the *context manager* protocol
   and the "close()" method.  If a "scandir()" iterator is neither
   exhausted nor explicitly closed a "ResourceWarning" will be emitted
   in its destructor.이 함수는 *경로류 객체*를 받아들입니다.

   버전 3.7에서 변경: 유닉스에서 파일 기술자에 대한 지원이 추가되었습
   니다.

class os.DirEntry

   디렉터리 항목의 파일 경로와 다른 파일 어트리뷰트를 노출하기 위해
   "scandir()"에 의해 산출되는 객체.

   "scandir()"는 추가 시스템 호출 없이 가능한 많은 정보를 제공합니다.
   "stat()" 또는 "lstat()" 시스템 호출이 이루어지면, "os.DirEntry" 객
   체는 결과를 캐시 합니다.

   "os.DirEntry" 인스턴스는 수명이 긴 데이터 구조에 저장하는 용도가 아
   닙니다; 파일 메타 데이터가 변경되었거나 "scandir()"를 호출한 후 오
   랜 시간이 지났음을 안다면, "os.stat(entry.path)"를 호출하여 최신 정
   보를 가져오십시오.

   "os.DirEntry" 메서드는 운영 체제 시스템 호출을 할 수 있으므로,
   "OSError"를 일으킬 수도 있습니다. 에러에 대해 매우 세부적인 제어가
   필요하면, "os.DirEntry" 메서드 중 하나를 호출할 때 "OSError"를 잡은
   후 적절하게 처리할 수 있습니다.

   *경로류 객체*로 직접 사용할 수 있도록, "os.DirEntry"는 "PathLike"
   인터페이스를 구현합니다.

   "os.DirEntry" 인스턴스의 어트리뷰트 및 메서드는 다음과 같습니다:

   name

      "scandir()" *path* 인자에 상대적인, 항목의 기본(base) 파일명.

      "name" 어트리뷰트는 "scandir()" *path* 인자가 "bytes" 형이면
      "bytes" 고, 그렇지 않으면 "str" 입니다. 바이트열 파일명을 디코딩
      하려면 "fsdecode()"를 사용하십시오.

   path

      항목의 전체 경로명: "os.path.join(scandir_path, entry.name)"과
      같습니다. 여기서 *scandir_path* 는 "scandir()" *path* 인자입니다
      . 경로는 "scandir()" *path* 인자가 절대 경로일 때만 절대 경로입
      니다. "scandir()" *path* 인자가 파일 기술자면, "path" 어트리뷰트
      는 "name" 어트리뷰트와 같습니다.

      "path" 어트리뷰트는 "scandir()" *path* 인자가 "bytes" 형이면
      "bytes"고, 그렇지 않으면 "str" 입니다. 바이트열 파일명을 디코딩
      하려면 "fsdecode()"를 사용하십시오.

   inode()

      항목의 아이노드(inode) 번호를 반환합니다.

      결과는 "os.DirEntry" 객체에 캐시 됩니다. 최신 정보를 가져오려면
      "os.stat(entry.path, follow_symlinks=False).st_ino"를 사용하십시
      오.

      최초의 캐시 되지 않은 호출에서, 윈도우 에서는 시스템 호출이 필요
      하지만, 유닉스에서는 그렇지 않습니다.

   is_dir(*, follow_symlinks=True)

      이 항목이 디렉터리 또는 디렉터리를 가리키는 심볼릭 링크면 "True"
      를 반환합니다; 항목이 다른 종류의 파일이거나 다른 종류의 파일을
      가리키면, 또는 더는 존재하지 않으면 "False"를 반환합니다.

      *follow_symlinks* 가 "False"면, 이 항목이 디렉터리일 때만 (심볼
      릭 링크를 따르지 않고) "True"를 반환합니다; 항목이 다른 종류의
      파일이거나 더는 존재하지 않으면 "False"를 반환합니다.

      결과는 *follow_symlinks* 가 "True" 및 "False"일 때에 대해 별도로
      "os.DirEntry" 객체에 캐시 됩니다. 최신 정보를 가져오려면,
      "stat.S_ISDIR()"로 "os.stat()"을 호출하십시오.

      최초의 캐시 되지 않은 호출에서, 대부분 시스템 호출이 필요하지 않
      습니다. 특히, 심볼릭 링크가 아니면, 윈도우나 유닉스 모두 시스템
      호출이 필요하지 않은데, 네트워크 파일 시스템과 같이
      "dirent.d_type == DT_UNKNOWN"를 반환하는 특정 유닉스 파일 시스템
      은 예외입니다. 항목이 심볼릭 링크면, *follow_symlinks* 가
      "False"가 아닌 이상, 심볼릭 링크를 따르기 위해 시스템 호출이 필
      요합니다.

      이 메서드는, "PermissionError"와 같은, "OSError"를 발생시킬 수
      있지만, "FileNotFoundError"는 잡혀서 발생하지 않습니다.

   is_file(*, follow_symlinks=True)

      이 항목이 파일이나 파일을 가리키는 심볼릭 링크면 "True"를 반환합
      니다; 항목이 디렉터리 또는 다른 비 파일 항목이거나, 그런 것을 가
      리키거나, 더는 존재하지 않으면 "False"를 반환합니다.

      *follow_symlinks* 가 "False"면, 이 항목이 파일일 때만 (심볼릭 링
      크를 따르지 않고) "True"를 반환합니다; 항목이 디렉터리 나 다른
      비 파일 항목이거나 더는 존재하지 않으면 "False"를 반환합니다.

      결과는 "os.DirEntry" 객체에 캐시 됩니다. 캐싱, 시스템 호출, 예외
      발생은 "is_dir()"과 같습니다.

   is_symlink()

      이 항목이 심볼릭 링크면 (망가졌다 하더라도) "True"를 반환합니다;
      항목이 디렉터리 나 어떤 종류의 파일이거나 더는 존재하지 않으면
      "False"를 반환합니다.

      결과는 "os.DirEntry" 객체에 캐시 됩니다. 최신 정보를 가져오려면
      "os.path.islink()"를 호출하십시오.

      첫 번째, 캐시 되지 않은 호출에서는 시스템 호출이 필요하지 않습니
      다. 특히 윈도우 나 유닉스는 "dirent.d_type == DT_UNKNOWN"를 반환
      하는 특정 유닉스 파일 시스템 (예 : 네트워크 파일 시스템)을 제외
      하고는 시스템 호출이 필요하지 않습니다.

      이 메서드는, "PermissionError"와 같은, "OSError"를 발생시킬 수
      있지만, "FileNotFoundError"는 잡혀서 발생하지 않습니다.

   is_junction()

      Return "True" if this entry is a junction (even if broken);
      return "False" if the entry points to a regular directory, any
      kind of file, a symlink, or if it doesn't exist anymore.

      The result is cached on the "os.DirEntry" object. Call
      "os.path.isjunction()" to fetch up-to-date information.

      Added in version 3.12.

   stat(*, follow_symlinks=True)

      이 항목의 "stat_result" 객체를 돌려줍니다. 이 메서드는 기본적으
      로 심볼릭 링크를 따릅니다; 심볼릭 링크를 stat 하려면,
      "follow_symlinks=False" 인자를 추가하십시오.

      유닉스에서, 이 메서드는 항상 시스템 호출을 요구합니다. 윈도우에
      서, *follow_symlinks* 가 "True"이고 항목이 재해석 지점(reparse
      point, 예를 들어, 심볼릭 링크나 디렉터리 정션(directory
      junction))일 때만 시스템 호출이 필요합니다.

      윈도우에서, "stat_result"의 "st_ino", "st_dev" 및 "st_nlink" 어
      트리뷰트는 항상 0으로 설정됩니다. 이러한 어트리뷰트를 얻으려면
      "os.stat()"을 호출하십시오.

      결과는 *follow_symlinks* 가 "True" 및 "False"일 때에 대해 별도로
      "os.DirEntry" 객체에 캐시 됩니다. 최신 정보를 가져오려면,
      "os.stat()"을 호출하십시오.

   Note that there is a nice correspondence between several attributes
   and methods of "os.DirEntry" and of "pathlib.Path".  In particular,
   the "name" attribute has the same meaning, as do the "is_dir()",
   "is_file()", "is_symlink()", "is_junction()", and "stat()" methods.

   Added in version 3.5.

   버전 3.6에서 변경: "PathLike" 인터페이스에 대한 지원이 추가되었습니
   다. 윈도우에서 "bytes" 경로에 대한 지원이 추가되었습니다.

   버전 3.12에서 변경: The "st_ctime" attribute of a stat result is
   deprecated on Windows. The file creation time is properly available
   as "st_birthtime", and in the future "st_ctime" may be changed to
   return zero or the metadata change time, if available.

os.stat(path, *, dir_fd=None, follow_symlinks=True)

   파일 또는 파일 기술자의 상태를 가져옵니다. 주어진 경로에 대해
   "stat()" 시스템 호출과 같은 작업을 수행합니다. *path* 는 문자열이나
   바이트열 -- 직접 또는 "PathLike" 인터페이스를 통해 간접적으로 -- 또
   는 열린 파일 기술자로 지정될 수 있습니다. "stat_result" 객체를 반환
   합니다.

   이 함수는 일반적으로 심볼릭 링크를 따릅니다; 심볼릭 링크를 stat 하
   려면, 인자 "follow_symlinks=False"를 추가하거나 "lstat()"를 사용하
   십시오.

   이 함수는 파일 기술자 지정 및 심볼릭 링크를 따르지 않음을 지원할 수
   있습니다.

   윈도우에서, "follow_symlinks=False"를 전달하면 심볼릭 링크와 디렉터
   리 정션(directory junction)을 포함하는 모든 이름 서로게이트(name-
   surrogate) 재해석 지점(reparse point)을 따라가지 않습니다. 링크처럼
   보이지 않거나 운영 체제에서 따라갈 수 없는 다른 유형의 재해석 지점
   은 직접 열립니다. 여러 링크 체인을 따라갈 때, 전체 탐색을 방해하는
   비 링크 대신 원래 링크가 반환될 수 있습니다. 이 경우 최종 경로에 대
   한 stat 결과를 얻으려면, "os.path.realpath()" 함수를 사용하여 가능
   한 한 멀리 간 경로 이름을 확인한 다음 드 결과에 대해 "lstat()"을 호
   출하십시오. 매달린(dangling) 심볼릭 링크나 정션 지점에는 적용되지
   않고, 일반적인 예외가 발생합니다.

   예:

      >>> import os
      >>> statinfo = os.stat('somefile.txt')
      >>> statinfo
      os.stat_result(st_mode=33188, st_ino=7876932, st_dev=234881026,
      st_nlink=1, st_uid=501, st_gid=501, st_size=264, st_atime=1297230295,
      st_mtime=1297230027, st_ctime=1297230027)
      >>> statinfo.st_size
      264

   더 보기: "fstat()" 및 "lstat()" 함수.

   버전 3.3에서 변경: Added the *dir_fd* and *follow_symlinks*
   parameters, specifying a file descriptor instead of a path.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.8에서 변경: 윈도우에서, 이제 운영 체제가 결정할 수 있는 모든
   재해석 지점을 따라가고, "follow_symlinks=False"를 전달하면 모든 이
   름 서로게이트 재해석 지점을 따라가지 않습니다. 운영 체제가 따라갈
   수 없는 재해석 지점에 도달하면, *stat*은 이제 에러를 발생시키는 대
   신 "follow_symlinks=False"가 지정된 것처럼 원래 경로에 대한 정보를
   반환합니다.

class os.stat_result

   Object whose attributes correspond roughly to the members of the
   "stat" structure. It is used for the result of "os.stat()",
   "os.fstat()" and "os.lstat()".

   어트리뷰트:

   st_mode

      파일 모드: 파일 유형 및 파일 모드 비트 (사용 권한).

   st_ino

      플랫폼에 따라 다르지만, 0이 아니면, 지정된 값의 "st_dev"은 파일
      을 고유하게 식별합니다. 일반적으로:

      * 유닉스의 아이노드 번호,

      * 윈도우의 파일 인덱스

   st_dev

      이 파일이 있는 장치의 식별자.

   st_nlink

      하드 링크 수.

   st_uid

      파일 소유자의 사용자 식별자.

   st_gid

      파일 소유자의 그룹 식별자.

   st_size

      일반 파일 또는 심볼릭 링크면, 바이트 단위의 파일의 크기. 심볼릭
      링크의 크기는 포함하고 있는 경로명의 길이이며, 끝나는 널 바이트
      는 포함하지 않습니다.

   타임스탬프:

   st_atime

      초 단위의 가장 최근의 액세스 시간.

   st_mtime

      초 단위의 가장 최근의 내용 수정 시간.

   st_ctime

      Time of most recent metadata change expressed in seconds.

      버전 3.12에서 변경: "st_ctime" is deprecated on Windows. Use
      "st_birthtime" for the file creation time. In the future,
      "st_ctime" will contain the time of the most recent metadata
      change, as for other platforms.

   st_atime_ns

      나노초 정수 단위의 가장 최근의 액세스 시간.

      Added in version 3.3.

   st_mtime_ns

      나노초 정수 단위의 가장 최근의 내용 수정 시간.

      Added in version 3.3.

   st_ctime_ns

      Time of most recent metadata change expressed in nanoseconds as
      an integer.

      Added in version 3.3.

      버전 3.12에서 변경: "st_ctime_ns" is deprecated on Windows. Use
      "st_birthtime_ns" for the file creation time. In the future,
      "st_ctime" will contain the time of the most recent metadata
      change, as for other platforms.

   st_birthtime

      Time of file creation expressed in seconds. This attribute is
      not always available, and may raise "AttributeError".

      버전 3.12에서 변경: "st_birthtime" is now available on Windows.

   st_birthtime_ns

      Time of file creation expressed in nanoseconds as an integer.
      This attribute is not always available, and may raise
      "AttributeError".

      Added in version 3.12.

   참고:

     The exact meaning and resolution of the "st_atime", "st_mtime",
     "st_ctime" and "st_birthtime" attributes depend on the operating
     system and the file system. For example, on Windows systems using
     the FAT32 file systems, "st_mtime" has 2-second resolution, and
     "st_atime" has only 1-day resolution. See your operating system
     documentation for details.Similarly, although "st_atime_ns",
     "st_mtime_ns", "st_ctime_ns" and "st_birthtime_ns" are always
     expressed in nanoseconds, many systems do not provide nanosecond
     precision.  On systems that do provide nanosecond precision, the
     floating-point object used to store "st_atime", "st_mtime",
     "st_ctime" and "st_birthtime" cannot preserve all of it, and as
     such will be slightly inexact. If you need the exact timestamps
     you should always use "st_atime_ns", "st_mtime_ns", "st_ctime_ns"
     and "st_birthtime_ns".

   (리눅스와 같은) 일부 유닉스 시스템에서는, 다음 어트리뷰트도 사용할
   수 있습니다:

   st_blocks

      파일에 할당된 512-바이트 블록 수. 파일에 구멍이 있으면
      "st_size"/512보다 작을 수 있습니다.

   st_blksize

      효율적인 파일 시스템 I/O를 위해 "선호되는" 블록 크기. 더 작은 크
      기로 파일에 기록하면 비효율적인 읽기-수정-다시 쓰기가 발생할 수
      있습니다.

   st_rdev

      아이노드 장치면 장치 유형.

   st_flags

      파일에 대한 사용자 정의 플래그.

   (FreeBSD와 같은) 다른 유닉스 시스템에서는, 다음 어트리뷰트를 사용할
   수 있습니다 (그러나 root가 사용하려고 할 때만 채워질 수 있습니다):

   st_gen

      파일 생성 번호.

   Solaris 및 파생 상품에서, 다음 어트리뷰트도 사용할 수 있습니다:

   st_fstype

      파일을 포함하는 파일 시스템의 유형을 고유하게 식별하는 문자열.

   On macOS systems, the following attributes may also be available:

   st_rsize

      파일의 실제 크기.

   st_creator

      파일의 생성자.

   st_type

      파일 유형.

   윈도우 시스템에서는, 다음 어트리뷰트도 사용할 수 있습니다:

   st_file_attributes

      Windows file attributes: "dwFileAttributes" member of the
      "BY_HANDLE_FILE_INFORMATION" structure returned by
      "GetFileInformationByHandle()". See the "FILE_ATTRIBUTE_*
      <stat.FILE_ATTRIBUTE_ARCHIVE>" constants in the "stat" module.

      Added in version 3.5.

   st_reparse_tag

      When "st_file_attributes" has the "FILE_ATTRIBUTE_REPARSE_POINT"
      set, this field contains the tag identifying the type of reparse
      point. See the "IO_REPARSE_TAG_*" constants in the "stat"
      module.

   The standard module "stat" defines functions and constants that are
   useful for extracting information from a "stat" structure. (On
   Windows, some items are filled with dummy values.)

   For backward compatibility, a "stat_result" instance is also
   accessible as a tuple of at least 10 integers giving the most
   important (and portable) members of the "stat" structure, in the
   order "st_mode", "st_ino", "st_dev", "st_nlink", "st_uid",
   "st_gid", "st_size", "st_atime", "st_mtime", "st_ctime". More items
   may be added at the end by some implementations. For compatibility
   with older Python versions, accessing "stat_result" as a tuple
   always returns integers.

   버전 3.5에서 변경: 윈도우는 이제 사용 가능할 때 파일 인덱스를
   "st_ino"로 반환합니다.

   버전 3.7에서 변경: Solaris/파생 제품에 "st_fstype" 멤버를 추가했습
   니다.

   버전 3.8에서 변경: 윈도우에서 "st_reparse_tag" 멤버를 추가했습니다.

   버전 3.8에서 변경: 윈도우에서, "st_mode" 멤버는 이제 특수 파일을
   "S_IFCHR", "S_IFIFO" 또는 "S_IFBLK"로 적절히 식별합니다.

   버전 3.12에서 변경: On Windows, "st_ctime" is deprecated.
   Eventually, it will contain the last metadata change time, for
   consistency with other platforms, but for now still contains
   creation time. Use "st_birthtime" for the creation time.On Windows,
   "st_ino" may now be up to 128 bits, depending on the file system.
   Previously it would not be above 64 bits, and larger file
   identifiers would be arbitrarily packed.On Windows, "st_rdev" no
   longer returns a value. Previously it would contain the same as
   "st_dev", which was incorrect.Added the "st_birthtime" member on
   Windows.

os.statvfs(path)

   Perform a "statvfs()" system call on the given path.  The return
   value is an object whose attributes describe the filesystem on the
   given path, and correspond to the members of the "statvfs"
   structure, namely: "f_bsize", "f_frsize", "f_blocks", "f_bfree",
   "f_bavail", "f_files", "f_ffree", "f_favail", "f_flag",
   "f_namemax", "f_fsid".

   "f_flag" 어트리뷰트의 비트 플래그에 대해 두 개의 모듈 수준 상수가
   정의됩니다: "ST_RDONLY"가 설정되면, 파일 시스템은 읽기 전용으로 마
   운트되었고, "ST_NOSUID"가 설정되면, setuid/setgid 비트의 의미가 비
   활성화되었거나 지원되지 않습니다.

   추가적인 모듈 수준 상수가 GNU/glibc 기반 시스템에 대해 정의됩니다.
   이들은 "ST_NODEV" (장치 특수 파일에 대한 액세스 금지), "ST_NOEXEC"
   (프로그램 실행 금지), "ST_SYNCHRONOUS" (한 번에 쓰기 동기화),
   "ST_MANDLOCK" (FS에 필수 잠금 허용), "ST_WRITE" (파일/디렉터리/심볼
   릭 링크 쓰기), "ST_APPEND" (덧붙이기 전용 파일), "ST_IMMUTABLE" (불
   변 파일), "ST_NOATIME" (액세스 시간을 갱신하지 않음),
   "ST_NODIRATIME" (디렉터리 액세스 시간을 갱신하지 않음),
   "ST_RELATIME" (mtime/ctime에 상대적으로 atime을 갱신).

   이 함수는 파일 기술자 지정을 지원할 수 있습니다.

   가용성: Unix.

   버전 3.2에서 변경: "ST_RDONLY" 및 "ST_NOSUID" 상수가 추가되었습니다
   .

   버전 3.3에서 변경: *path*에 열린 파일 기술자를 지정하는 지원이 추가
   되었습니다.

   버전 3.4에서 변경: "ST_NODEV", "ST_NOEXEC", "ST_SYNCHRONOUS",
   "ST_MANDLOCK", "ST_WRITE", "ST_APPEND", "ST_IMMUTABLE",
   "ST_NOATIME", "ST_NODIRATIME" 및 "ST_RELATIME" 상수가 추가되었습니
   다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.7에서 변경: Added the "f_fsid" attribute.

os.supports_dir_fd

   "os" 모듈의 어떤 함수가 *dir_fd* 매개 변수로 열린 파일 기술자를 받
   아들이는지를 나타내는 "set" 객체. 플랫폼마다 다른 기능을 제공하며,
   파이썬이 *dir_fd* 매개 변수를 구현하는 데 사용하는 하부 기능이 파이
   썬이 지원하는 모든 플랫폼에서 제공되지는 않습니다. 일관성을 위해,
   *dir_fd* 를 지원할 수도 있는 함수는 항상 매개 변수를 지정할 수 있도
   록 하지만, 로컬에서 사용할 수 없을 때, 기능을 사용하면 예외를 발생
   시킵니다. (*dir_fd*에 "None"을 지정하는 것은 모든 플랫폼에서 항상
   지원됩니다.)

   특정 함수가 *dir_fd* 매개 변수로 열린 파일 기술자를 받아들이는지 확
   인하려면, "supports_dir_fd"에 "in" 연산자를 사용하십시오. 예를 들어
   , 이 표현식은 로컬 플랫폼에서 "os.stat()"이 *dir_fd* 매개 변수로 열
   린 파일 기술자를 받아들이면 "True"로 평가됩니다:

      os.stat in os.supports_dir_fd

   현재 *dir_fd* 매개 변수는 유닉스 플랫폼에서만 작동합니다; 어느 것도
   윈도우에서 작동하지 않습니다.

   Added in version 3.3.

os.supports_effective_ids

   "os.access()"가 로컬 플랫폼에서 *effective_ids* 매개 변수에 "True"
   를 지정하는 것을 허용하는지를 나타내는 "set" 객체. (*effective_ids*
   에 "False"를 지정하는 것은 모든 플랫폼에서 항상 지원됩니다.) 로컬
   플랫폼이 지원하면, 컬렉션에 "os.access()"가 포함됩니다; 그렇지 않으
   면 비어있게 됩니다.

   이 표현식은 로컬 플랫폼에서 "os.access()"가 "effective_ids=True"를
   지원하면 "True"로 평가됩니다:

      os.access in os.supports_effective_ids

   현재 *effective_ids* 는 유닉스 플랫폼에서만 지원됩니다; 윈도우에서
   는 작동하지 않습니다.

   Added in version 3.3.

os.supports_fd

   "os" 모듈의 어떤 함수가 로컬 플랫폼에서 자신의 *path* 매개 변수에
   열린 파일 기술자를 지정하는 것을 허용하는지를 나타내는 "set" 객체.
   플랫폼마다 다른 기능을 제공하며, 파이썬이 *path*로 열린 파일 기술자
   를 받아들이는 데 사용하는 하부 기능이 파이썬이 지원하는 모든 플랫폼
   에서 제공되지는 않습니다.

   특정 함수가 *path* 매개 변수에 열린 파일 기술자를 지정할 수 있도록
   허용하는지를 판단하려면, "supports_fd"에 "in" 연산자를 사용하십시오
   . 예를 들어, 이 표현식은 로컬 플랫폼에서 "os.chdir()"가 *path*로 열
   린 파일 기술자를 받아들이면 "True"로 평가됩니다:

      os.chdir in os.supports_fd

   Added in version 3.3.

os.supports_follow_symlinks

   "os" 모듈의 어떤 함수가 *follow_symlinks* 매개 변수로 "False"를 받
   아들이는지를 나타내는 "set" 객체. 플랫폼마다 다른 기능을 제공하며,
   파이썬이 *follow_symlinks*를 구현하는 데 사용하는 하부 기능이 파이
   썬이 지원하는 모든 플랫폼에서 제공되지는 않습니다. 일관성을 위해,
   *follow_symlinks* 를 지원할 수도 있는 함수는 항상 매개 변수를 지정
   할 수 있도록 하지만, 로컬에서 사용할 수 없을 때, 기능이 사용되면 예
   외를 발생시킵니다. (*follow_symlinks*에 "None"을 지정하는 것은 모든
   플랫폼에서 항상 지원됩니다.)

   특정 함수가 *follow_symlinks* 매개 변수로 "False"를 받아들이는지 확
   인하려면, "supports_follow_symlinks"에 "in" 연산자를 사용하십시오.
   예를 들어, 이 표현식은 로컬 플랫폼에서 "os.stat()"을 호출할 때
   "follow_symlinks=False"를 지정할 수 있으면 "True"로 평가됩니다:

      os.stat in os.supports_follow_symlinks

   Added in version 3.3.

os.symlink(src, dst, target_is_directory=False, *, dir_fd=None)

   *src를* 가리키는 *dst* 라는 이름의 심볼릭 링크를 만듭니다.

   윈도우에서, 심볼릭 링크는 파일이나 디렉터리를 나타내며, 동적으로 대
   상에 맞춰 변형되지 않습니다. 대상이 있으면, 일치하도록 심볼릭 링크
   의 유형이 만들어집니다. 그렇지 않으면, *target_is_directory* 가
   "True" 면 심볼릭 링크가 디렉터리로 만들어지고, 그렇지 않으면 파일
   심볼릭 링크(기본값)가 만들어집니다. 비 윈도우 플랫폼에서는
   *target_is_directory* 가 무시됩니다.

   이 함수는 디렉터리 기술자에 상대적인 경로를 지원할 수 있습니다.

   참고:

     최신 버전의 윈도우 10에서, 개발자 모드가 활성화되면, 권한이 없는
     계정이 심볼릭 링크를 만들 수 있습니다. 개발자 모드를 사용할 수 없
     거나 활성화되어 있지 않으면, *SeCreateSymbolicLinkPrivilege* 권한
     이 필요하거나, 프로세스를 관리자로 실행해야 합니다.권한이 없는 사
     용자가 함수를 호출하면 "OSError"가 발생합니다.

   "src", "dst", "dir_fd"를 인자로 감사 이벤트(auditing event)
   "os.symlink"를 발생시킵니다.

   가용성: Unix, Windows.

   The function is limited on WASI, see 웹어셈블리 플랫폼 for more
   information.

   버전 3.2에서 변경: 윈도우 6.0 (Vista) 심볼릭 링크에 대한 지원이 추
   가되었습니다.

   버전 3.3에서 변경: Added the *dir_fd* parameter, and now allow
   *target_is_directory* on non-Windows platforms.

   버전 3.6에서 변경: *src* 및 *dst*로 *경로류 객체*를 받아들입니다.

   버전 3.8에서 변경: 개발자 모드가 있는 윈도우에서 권한 상승 없는
   (unelevated) 심볼릭 링크에 대한 지원이 추가되었습니다.

os.sync()

   디스크에 모든 것을 쓰도록 강제합니다.

   가용성: Unix.

   Added in version 3.3.

os.truncate(path, length)

   최대 *length* 바이트가 되도록 *path*에 해당하는 파일을 자릅니다.

   이 함수는 파일 기술자 지정을 지원할 수 있습니다.

   "path", "length"를 인자로 감사 이벤트(auditing event) "os.truncate"
   를 발생시킵니다.

   가용성: Unix, Windows.

   Added in version 3.3.

   버전 3.5에서 변경: 윈도우 지원 추가

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.unlink(path, *, dir_fd=None)

   파일 *path*를 제거(삭제)합니다. 이 함수는 의미상 "remove()"와 같습
   니다; "unlink" 라는 이름은 전통적인 유닉스 이름입니다. 자세한 내용
   은 "remove()" 설명서를 참조하십시오.

   "path", "dir_fd"를 인자로 감사 이벤트(auditing event) "os.remove"를
   발생시킵니다.

   버전 3.3에서 변경: *dir_fd* 매개 변수가 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.utime(path, times=None, *, [ns, ]dir_fd=None, follow_symlinks=True)

   *path*로 지정된 파일의 액세스 및 수정 시간을 설정합니다.

   "utime()"은 *times* 과 *ns* 라는 두 개의 선택적 매개 변수를 취합니
   다. *path*에 설정할 시간을 지정하며 다음과 같이 사용됩니다:

   * *ns* 가 지정되면, "(atime_ns, mtime_ns)" 형식의 2-튜플이어야 하며
     , 각 멤버는 나노초를 나타내는 int입니다.

   * *times* 가 "None"이 아니면, "(atime, mtime)" 형식의 2-튜플이어야
     하며, 각 멤버는 초를 나타내는 int 또는 float입니다.

   * *times* 가 "None"이고 *ns* 가 지정되지 않으면, "ns=(atime_ns,
     mtime_ns)"를 지정하는 것과 같은데, 두 시간 모두 현재 시각입니다.

   *times* 와 *ns*에 모두 튜플을 지정하는 것은 에러입니다.

   Note that the exact times you set here may not be returned by a
   subsequent "stat()" call, depending on the resolution with which
   your operating system records access and modification times; see
   "stat()". The best way to preserve exact times is to use the
   *st_atime_ns* and *st_mtime_ns* fields from the "os.stat()" result
   object with the *ns* parameter to "utime()".

   이 함수는 파일 기술자 지정, 디렉터리 기술자에 상대적인 경로 및 심볼
   릭 링크를 따르지 않음을 지원할 수 있습니다.

   "path", "times", "ns", "dir_fd"를 인자로 감사 이벤트(auditing
   event) "os.utime"을 발생시킵니다.

   버전 3.3에서 변경: *path*에 열린 파일 기술자를 지정하는 것과
   *dir_fd* , *follow_symlinks* 및 *ns* 매개 변수 지원이 추가되었습니
   다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.walk(top, topdown=True, onerror=None, followlinks=False)

   트리를 하향식 또는 상향식으로 탐색하여 디렉터리 트리에 있는 파일명
   을 생성합니다. 디렉터리 *top*을 루트로 하는 트리의 디렉터리(*top*
   자체를 포함합니다)마다, 3-튜플 "(dirpath, dirnames, filenames)"를
   산출합니다.

   *dirpath* is a string, the path to the directory.  *dirnames* is a
   list of the names of the subdirectories in *dirpath* (including
   symlinks to directories, and excluding "'.'" and "'..'").
   *filenames* is a list of the names of the non-directory files in
   *dirpath*. Note that the names in the lists contain no path
   components.  To get a full path (which begins with *top*) to a file
   or directory in *dirpath*, do "os.path.join(dirpath, name)".
   Whether or not the lists are sorted depends on the file system.  If
   a file is removed from or added to the *dirpath* directory during
   generating the lists, whether a name for that file be included is
   unspecified.

   선택적 인자 *topdown* 이 "True"이거나 지정되지 않으면, 디렉터리에
   대한 3-튜플은 하위 디렉터리에 대한 3-튜플이 생성되기 전에 생성됩니
   다 (디렉터리는 하향식으로 생성됩니다). *topdown* 이 "False"면, 모든
   하위 디렉터리에 대한 3-튜플 다음에 디렉터리에 대한 3-튜플이 생성됩
   니다 (디렉터리가 상향식으로 생성됨). *topdown* 의 값에 상관없이, 디
   렉터리와 해당 하위 디렉터리의 튜플이 생성되기 전에 하위 디렉터리 목
   록이 조회됩니다.

   *topdown* 이 "True" 일 때, 호출자는 (아마도 "del" 또는 슬라이스 대
   입을 사용하여) *dirnames* 리스트를 수정할 수 있으며, "walk()"는 이
   름이 *dirnames* 남아있는 하위 디렉터리로만 재귀합니다; 검색을 가지
   치기하거나, 특정 방문 순서를 지정하거나, 심지어 "walk()"가 다시 시
   작하기 전에 호출자가 새로 만들거나 이름을 바꾼 디렉터리에 대해
   "walk()"에 알릴 때도 사용할 수 있습니다. *topdown* 이 "False"일 때
   *dirnames*를 수정하는 것은 walk의 동작에 영향을 주지 못하는데, 상향
   식 모드에서 *dirnames*의 디렉터리는 *dirpath* 자체가 생성되기 전에
   생성되기 때문입니다.

   기본적으로, "scandir()" 호출의 에러는 무시됩니다. 선택적 인자
   *onerror* 가 지정되면, 함수여야 합니다; 하나의 인자 "OSError" 인스
   턴스로 호출됩니다. 에러를 보고하고 walk를 계속하도록 하거나, 예외를
   발생시켜 walk를 중단할 수 있습니다. 파일명은 예외 객체의 "filename"
   어트리뷰트로 제공됩니다.

   기본적으로, "walk()"는 디렉터리로 해석되는 심볼릭 링크로 이동하지
   않습니다. 지원하는 시스템에서, 심볼릭 링크가 가리키는 디렉터리를 방
   문하려면, *followlinks*를 "True"로 설정하십시오.

   참고:

     심볼릭 링크가 자신의 부모 디렉터리를 가리킬 때, *followlinks*를
     "True"로 설정하면 무한 재귀가 발생할 수 있음에 주의해야 합니다.
     "walk()"는 이미 방문한 디렉터리를 추적하지 않습니다.

   참고:

     상대 경로명을 전달할 때는, "walk()"가 실행되는 도중 현재 작업 디
     렉터리를 변경하지 마십시오. "walk()"는 현재 디렉터리를 절대로 변
     경하지 않으며, 호출자도 마찬가지라고 가정합니다.

   This example displays the number of bytes taken by non-directory
   files in each directory under the starting directory, except that
   it doesn't look under any "__pycache__" subdirectory:

      import os
      from os.path import join, getsize
      for root, dirs, files in os.walk('python/Lib/xml'):
          print(root, "consumes", end=" ")
          print(sum(getsize(join(root, name)) for name in files), end=" ")
          print("bytes in", len(files), "non-directory files")
          if '__pycache__' in dirs:
              dirs.remove('__pycache__')  # don't visit __pycache__ directories

   다음 예("shutil.rmtree()"의 간단한 구현)에서는, 트리를 상향식으로
   탐색하는 것이 필수적입니다, "rmdir()"는 비어 있지 않은 디렉터리를
   삭제할 수 없습니다:

      # Delete everything reachable from the directory named in "top",
      # assuming there are no symbolic links.
      # CAUTION:  This is dangerous!  For example, if top == '/', it
      # could delete all your disk files.
      import os
      for root, dirs, files in os.walk(top, topdown=False):
          for name in files:
              os.remove(os.path.join(root, name))
          for name in dirs:
              os.rmdir(os.path.join(root, name))
      os.rmdir(top)

   "top", "topdown", "onerror", "followlinks"를 인자로 감사 이벤트
   (auditing event) "os.walk"를 발생시킵니다.

   버전 3.5에서 변경: 이 함수는 이제 "os.listdir()" 대신
   "os.scandir()"를 호출하기 때문에, "os.stat()" 호출 수를 줄여 더 빨
   라졌습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.fwalk(top='.', topdown=True, onerror=None, *, follow_symlinks=False, dir_fd=None)

   이 함수는 "walk()"와 똑같이 동작합니다. 단, 4-튜플 "(dirpath,
   dirnames, filenames, dirfd)"를 산출하고 "dir_fd"를 지원합니다.

   *dirpath* , *dirnames* 및 *filenames* 은 "walk()" 출력과 같고,
   *dirfd* 는 *dirpath* 디렉터리를 가리키는 파일 기술자입니다.

   이 함수는 항상 디렉터리 기술자에 상대적인 경로 및 심볼릭 링크를 따
   르지 않음을 지원합니다. 하지만, 다른 함수와는 달리,
   *follow_symlinks*에 대한 "fwalk()"의 기본값은 "False"임에 주의하십
   시오.

   참고:

     "fwalk()"는 다음 이터레이션 단계까지만 유효한 파일 기술자를 산출
     하기 때문에, 더 오래 유지하려면 복제해야 합니다 (예를 들어,
     "dup()"로).

   This example displays the number of bytes taken by non-directory
   files in each directory under the starting directory, except that
   it doesn't look under any "__pycache__" subdirectory:

      import os
      for root, dirs, files, rootfd in os.fwalk('python/Lib/xml'):
          print(root, "consumes", end=" ")
          print(sum([os.stat(name, dir_fd=rootfd).st_size for name in files]),
                end=" ")
          print("bytes in", len(files), "non-directory files")
          if '__pycache__' in dirs:
              dirs.remove('__pycache__')  # don't visit __pycache__ directories

   다음 예에서는, 트리를 상향식으로 탐색하는 것이 필수적입니다:
   "rmdir()"는 비어 있지 않은 디렉터리를 삭제할 수 없습니다:

      # Delete everything reachable from the directory named in "top",
      # assuming there are no symbolic links.
      # CAUTION:  This is dangerous!  For example, if top == '/', it
      # could delete all your disk files.
      import os
      for root, dirs, files, rootfd in os.fwalk(top, topdown=False):
          for name in files:
              os.unlink(name, dir_fd=rootfd)
          for name in dirs:
              os.rmdir(name, dir_fd=rootfd)

   "top", "topdown", "onerror", "follow_symlinks", "dir_fd"를 인자로
   감사 이벤트(auditing event) "os.fwalk"를 발생시킵니다.

   가용성: Unix.

   Added in version 3.3.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.7에서 변경: "bytes" 경로에 대한 지원이 추가되었습니다.

os.memfd_create(name[, flags=os.MFD_CLOEXEC])

   익명 파일을 만들고 이를 가리키는 파일 기술자를 반환합니다. *flags*
   는 시스템에서 사용할 수 있는 "os.MFD_*" 상수(또는 이들의 비트별 OR
   조합) 중 하나여야 합니다. 기본적으로, 새 파일 기술자는 상속 불가능
   합니다.

   *name*에 제공된 이름은 파일명으로 사용되며 해당 심볼릭 링크의 대상
   으로 "/proc/self/fd/" 디렉터리에 표시됩니다. 표시된 이름에는 항상
   "memfd:" 접두어가 붙으며 디버깅 목적으로만 사용됩니다. 이름은 파일
   기술자의 동작에 영향을 미치지 않고, 여러 파일이 부작용 없이 같은 이
   름을 가질 수 있습니다.

   가용성: Linux >= 3.17 with glibc >= 2.27.

   Added in version 3.8.

os.MFD_CLOEXEC
os.MFD_ALLOW_SEALING
os.MFD_HUGETLB
os.MFD_HUGE_SHIFT
os.MFD_HUGE_MASK
os.MFD_HUGE_64KB
os.MFD_HUGE_512KB
os.MFD_HUGE_1MB
os.MFD_HUGE_2MB
os.MFD_HUGE_8MB
os.MFD_HUGE_16MB
os.MFD_HUGE_32MB
os.MFD_HUGE_256MB
os.MFD_HUGE_512MB
os.MFD_HUGE_1GB
os.MFD_HUGE_2GB
os.MFD_HUGE_16GB

   이 플래그들은 "memfd_create()"로 전달될 수 있습니다.

   가용성: Linux >= 3.17 with glibc >= 2.27

   The "MFD_HUGE*" flags are only available since Linux 4.14.

   Added in version 3.8.

os.eventfd(initval[, flags=os.EFD_CLOEXEC])

   Create and return an event file descriptor. The file descriptors
   supports raw "read()" and "write()" with a buffer size of 8,
   "select()", "poll()" and similar. See man page *eventfd(2)* for
   more information.  By default, the new file descriptor is non-
   inheritable.

   *initval* is the initial value of the event counter. The initial
   value must be a 32 bit unsigned integer. Please note that the
   initial value is limited to a 32 bit unsigned int although the
   event counter is an unsigned 64 bit integer with a maximum value of
   2^64-2.

   *flags* can be constructed from "EFD_CLOEXEC", "EFD_NONBLOCK", and
   "EFD_SEMAPHORE".

   If "EFD_SEMAPHORE" is specified and the event counter is non-zero,
   "eventfd_read()" returns 1 and decrements the counter by one.

   If "EFD_SEMAPHORE" is not specified and the event counter is non-
   zero, "eventfd_read()" returns the current event counter value and
   resets the counter to zero.

   If the event counter is zero and "EFD_NONBLOCK" is not specified,
   "eventfd_read()" blocks.

   "eventfd_write()" increments the event counter. Write blocks if the
   write operation would increment the counter to a value larger than
   2^64-2.

   예:

      import os

      # semaphore with start value '1'
      fd = os.eventfd(1, os.EFD_SEMAPHORE | os.EFC_CLOEXEC)
      try:
          # acquire semaphore
          v = os.eventfd_read(fd)
          try:
              do_work()
          finally:
              # release semaphore
              os.eventfd_write(fd, v)
      finally:
          os.close(fd)

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.10.

os.eventfd_read(fd)

   Read value from an "eventfd()" file descriptor and return a 64 bit
   unsigned int. The function does not verify that *fd* is an
   "eventfd()".

   가용성: Linux >= 2.6.27

   Added in version 3.10.

os.eventfd_write(fd, value)

   Add value to an "eventfd()" file descriptor. *value* must be a 64
   bit unsigned int. The function does not verify that *fd* is an
   "eventfd()".

   가용성: Linux >= 2.6.27

   Added in version 3.10.

os.EFD_CLOEXEC

   Set close-on-exec flag for new "eventfd()" file descriptor.

   가용성: Linux >= 2.6.27

   Added in version 3.10.

os.EFD_NONBLOCK

   Set "O_NONBLOCK" status flag for new "eventfd()" file descriptor.

   가용성: Linux >= 2.6.27

   Added in version 3.10.

os.EFD_SEMAPHORE

   Provide semaphore-like semantics for reads from an "eventfd()" file
   descriptor. On read the internal counter is decremented by one.

   가용성: Linux >= 2.6.30

   Added in version 3.10.


Timer File Descriptors
----------------------

Added in version 3.13.

These functions provide support for Linux's *timer file descriptor*
API. Naturally, they are all only available on Linux.

os.timerfd_create(clockid, /, *, flags=0)

   Create and return a timer file descriptor (*timerfd*).

   The file descriptor returned by "timerfd_create()" supports:

   * "read()"

   * "select()"

   * "poll()"

   The file descriptor's "read()" method can be called with a buffer
   size of 8. If the timer has already expired one or more times,
   "read()" returns the number of expirations with the host's
   endianness, which may be converted to an "int" by
   "int.from_bytes(x, byteorder=sys.byteorder)".

   "select()" and "poll()" can be used to wait until timer expires and
   the file descriptor is readable.

   *clockid* must be a valid clock ID, as defined in the "time"
   module:

   * "time.CLOCK_REALTIME"

   * "time.CLOCK_MONOTONIC"

   * "time.CLOCK_BOOTTIME" (Since Linux 3.15 for timerfd_create)

   If *clockid* is "time.CLOCK_REALTIME", a settable system-wide real-
   time clock is used. If system clock is changed, timer setting need
   to be updated. To cancel timer when system clock is changed, see
   "TFD_TIMER_CANCEL_ON_SET".

   If *clockid* is "time.CLOCK_MONOTONIC", a non-settable
   monotonically increasing clock is used. Even if the system clock is
   changed, the timer setting will not be affected.

   If *clockid* is "time.CLOCK_BOOTTIME", same as
   "time.CLOCK_MONOTONIC" except it includes any time that the system
   is suspended.

   The file descriptor's behaviour can be modified by specifying a
   *flags* value. Any of the following variables may used, combined
   using bitwise OR (the "|" operator):

   * "TFD_NONBLOCK"

   * "TFD_CLOEXEC"

   If "TFD_NONBLOCK" is not set as a flag, "read()" blocks until the
   timer expires. If it is set as a flag, "read()" doesn't block, but
   If there hasn't been an expiration since the last call to read,
   "read()" raises "OSError" with "errno" is set to "errno.EAGAIN".

   "TFD_CLOEXEC" is always set by Python automatically.

   The file descriptor must be closed with "os.close()" when it is no
   longer needed, or else the file descriptor will be leaked.

   더 보기: The *timerfd_create(2)* man page.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.timerfd_settime(fd, /, *, flags=flags, initial=0.0, interval=0.0)

   Alter a timer file descriptor's internal timer. This function
   operates the same interval timer as "timerfd_settime_ns()".

   *fd* must be a valid timer file descriptor.

   The timer's behaviour can be modified by specifying a *flags*
   value. Any of the following variables may used, combined using
   bitwise OR (the "|" operator):

   * "TFD_TIMER_ABSTIME"

   * "TFD_TIMER_CANCEL_ON_SET"

   The timer is disabled by setting *initial* to zero ("0"). If
   *initial* is equal to or greater than zero, the timer is enabled.
   If *initial* is less than zero, it raises an "OSError" exception
   with "errno" set to "errno.EINVAL"

   By default the timer will fire when *initial* seconds have elapsed.
   (If *initial* is zero, timer will fire immediately.)

   However, if the "TFD_TIMER_ABSTIME" flag is set, the timer will
   fire when the timer's clock (set by *clockid* in
   "timerfd_create()") reaches *initial* seconds.

   The timer's interval is set by the *interval* "float". If
   *interval* is zero, the timer only fires once, on the initial
   expiration. If *interval* is greater than zero, the timer fires
   every time *interval* seconds have elapsed since the previous
   expiration. If *interval* is less than zero, it raises "OSError"
   with "errno" set to "errno.EINVAL"

   If the "TFD_TIMER_CANCEL_ON_SET" flag is set along with
   "TFD_TIMER_ABSTIME" and the clock for this timer is
   "time.CLOCK_REALTIME", the timer is marked as cancelable if the
   real-time clock is changed discontinuously. Reading the descriptor
   is aborted with the error ECANCELED.

   Linux manages system clock as UTC. A daylight-savings time
   transition is done by changing time offset only and doesn't cause
   discontinuous system clock change.

   Discontinuous system clock change will be caused by the following
   events:

   * "settimeofday"

   * "clock_settime"

   * set the system date and time by "date" command

   Return a two-item tuple of ("next_expiration", "interval") from the
   previous timer state, before this function executed.

   더 보기:

     *timerfd_create(2)*, *timerfd_settime(2)*, *settimeofday(2)*,
     *clock_settime(2)*, and *date(1)*.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.timerfd_settime_ns(fd, /, *, flags=0, initial=0, interval=0)

   Similar to "timerfd_settime()", but use time as nanoseconds. This
   function operates the same interval timer as "timerfd_settime()".

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.timerfd_gettime(fd, /)

   Return a two-item tuple of floats ("next_expiration", "interval").

   "next_expiration" denotes the relative time until next the timer
   next fires, regardless of if the "TFD_TIMER_ABSTIME" flag is set.

   "interval" denotes the timer's interval. If zero, the timer will
   only fire once, after "next_expiration" seconds have elapsed.

   더 보기: *timerfd_gettime(2)*

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.timerfd_gettime_ns(fd, /)

   Similar to "timerfd_gettime()", but return time as nanoseconds.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.TFD_NONBLOCK

   A flag for the "timerfd_create()" function, which sets the
   "O_NONBLOCK" status flag for the new timer file descriptor. If
   "TFD_NONBLOCK" is not set as a flag, "read()" blocks.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.TFD_CLOEXEC

   A flag for the "timerfd_create()" function, If "TFD_CLOEXEC" is set
   as a flag, set close-on-exec flag for new file descriptor.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.TFD_TIMER_ABSTIME

   A flag for the "timerfd_settime()" and "timerfd_settime_ns()"
   functions. If this flag is set, *initial* is interpreted as an
   absolute value on the timer's clock (in UTC seconds or nanoseconds
   since the Unix Epoch).

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.

os.TFD_TIMER_CANCEL_ON_SET

   A flag for the "timerfd_settime()" and "timerfd_settime_ns()"
   functions along with "TFD_TIMER_ABSTIME". The timer is cancelled
   when the time of the underlying clock changes discontinuously.

   가용성: Linux >= 2.6.27 with glibc >= 2.8

   Added in version 3.13.


리눅스 확장 어트리뷰트
----------------------

Added in version 3.3.

이 함수들은 모두 리눅스에서만 사용 가능합니다.

os.getxattr(path, attribute, *, follow_symlinks=True)

   *path*의 확장 파일 시스템 어트리뷰트 *attribute*의 값을 반환합니다.
   *attribute* 는 bytes 또는 str(직접 또는 "PathLike" 인터페이스를 통
   해 간접적으로)일 수 있습니다. str이면, 파일 시스템 인코딩으로 인코
   딩됩니다.

   이 함수는 파일 기술자 지정 및 심볼릭 링크를 따르지 않음을 지원할 수
   있습니다.

   "path", "attribute"를 인자로 감사 이벤트(auditing event)
   "os.getxattr"을 발생시킵니다.

   버전 3.6에서 변경: *path* 및 *attribute*에 대해 *경로류 객체*를 받
   아들입니다.

os.listxattr(path=None, *, follow_symlinks=True)

   *path* 의 확장 파일 시스템 어트리뷰트 목록을 반환합니다. 목록의 어
   트리뷰트는 파일 시스템 인코딩으로 디코딩된 문자열로 표시됩니다.
   *path* 가 "None"이면, "listxattr()"는 현재 디렉터리를 검사합니다.

   이 함수는 파일 기술자 지정 및 심볼릭 링크를 따르지 않음을 지원할 수
   있습니다.

   "path"를 인자로 감사 이벤트(auditing event) "os.listxattr"을 발생시
   킵니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os.removexattr(path, attribute, *, follow_symlinks=True)

   Removes the extended filesystem attribute *attribute* from *path*.
   *attribute* should be bytes or str (directly or indirectly through
   the "PathLike" interface). If it is a string, it is encoded with
   the *filesystem encoding and error handler*.

   이 함수는 파일 기술자 지정 및 심볼릭 링크를 따르지 않음을 지원할 수
   있습니다.

   "path", "attribute"를 인자로 감사 이벤트(auditing event)
   "os.removexattr"을 발생시킵니다.

   버전 3.6에서 변경: *path* 및 *attribute*에 대해 *경로류 객체*를 받
   아들입니다.

os.setxattr(path, attribute, value, flags=0, *, follow_symlinks=True)

   Set the extended filesystem attribute *attribute* on *path* to
   *value*. *attribute* must be a bytes or str with no embedded NULs
   (directly or indirectly through the "PathLike" interface). If it is
   a str, it is encoded with the *filesystem encoding and error
   handler*.  *flags* may be "XATTR_REPLACE" or "XATTR_CREATE". If
   "XATTR_REPLACE" is given and the attribute does not exist,
   "ENODATA" will be raised. If "XATTR_CREATE" is given and the
   attribute already exists, the attribute will not be created and
   "EEXISTS" will be raised.

   이 함수는 파일 기술자 지정 및 심볼릭 링크를 따르지 않음을 지원할 수
   있습니다.

   참고:

     리눅스 커널 버전 2.6.39 미만의 버그로 인해 flags 인자가 일부 파일
     시스템에서 무시되었습니다.

   "path", "attribute", "value", "flags"를 인자로 감사 이벤트(auditing
   event) "os.setxattr"을 발생시킵니다.

   버전 3.6에서 변경: *path* 및 *attribute*에 대해 *경로류 객체*를 받
   아들입니다.

os.XATTR_SIZE_MAX

   확장 어트리뷰트 값의 최대 크기입니다. 현재, 리눅스에서 64 KiB입니다
   .

os.XATTR_CREATE

   이것은 "setxattr()"의 flags 인자를 위한 값입니다. 연산이 반드시 어
   트리뷰트를 새로 만들어야 함을 나타냅니다.

os.XATTR_REPLACE

   이것은 "setxattr()"의 flags 인자를 위한 값입니다. 연산이 반드시 기
   존 어트리뷰트를 대체해야 함을 나타냅니다.


프로세스 관리
=============

이 함수들은 프로세스를 만들고 관리하는데 사용될 수 있습니다.

다양한 "exec*" 함수는 프로세스로 로드되는 새 프로그램에 대한 인자 목록
을 받아들입니다. 각각의 경우에, 첫 번째 인자는 사용자가 명령 줄에 입력
할 수 있는 인자가 아닌 프로그램 자체의 이름으로 새 프로그램에 전달됩니
다. C 프로그래머에게, 이것은 프로그램의 "main()"에 전달된 "argv[0]"입
니다. 예를 들어, "os.execv('/bin/echo', ['foo', 'bar'])"는 표준 출력에
"bar"만 인쇄합니다; "foo"는 무시되는 것처럼 보이게 됩니다.

os.abort()

   현재 프로세스에 "SIGABRT" 시그널을 생성합니다. 유닉스에서, 기본 동
   작은 코어 덤프를 생성하는 것입니다; 윈도우에서, 프로세스는 즉시 종
   료 코드 "3"을 반환합니다. 이 함수를 호출하면 "signal.signal()"를 사
   용하여 "SIGABRT"에 등록된 파이썬 시그널 처리기를 호출하지 않게 됨에
   주의하시기 바랍니다.

os.add_dll_directory(path)

   DLL 검색 경로에 path를 추가합니다.

   This search path is used when resolving dependencies for imported
   extension modules (the module itself is resolved through
   "sys.path"), and also by "ctypes".

   반환된 객체의 **close()**를 호출하거나 반환된 객체를 "with" 문에서
   사용하여 디렉터리를 제거하십시오.

   DLL이 로드되는 방법에 대한 자세한 내용은 마이크로소프트 설명서를 참
   조하십시오.

   "path"를 인자로 감사 이벤트(auditing event) "os.add_dll_directory"
   를 발생시킵니다.

   가용성: Windows.

   Added in version 3.8: 이전 버전의 CPython은 현재 프로세스의 기본 동
   작을 사용하여 DLL을 해결(resolve)합니다. 이로 인해 때때로 "PATH"나
   현재 작업 디렉터리를 검색하거나, "AddDllDirectory"와 같은 OS 함수가
   효과가 없게 되는 것과 같은 일관성 없는 결과를 낳습니다.3.8에서는,
   일관성을 보장하기 위해 이제 DLL이 로드되는 두 가지 기본 방법이 프로
   세스 전반의 동작을 명시적으로 재정의합니다. 라이브러리 갱신에 대한
   정보는 이식 주의 사항을 참조하십시오.

os.execl(path, arg0, arg1, ...)
os.execle(path, arg0, arg1, ..., env)
os.execlp(file, arg0, arg1, ...)
os.execlpe(file, arg0, arg1, ..., env)
os.execv(path, args)
os.execve(path, args, env)
os.execvp(file, args)
os.execvpe(file, args, env)

   이 함수들은 모두 현재 프로세스를 대체해서 새로운 프로그램을 실행합
   니다; 반환되지 않습니다. 유닉스에서, 새로운 실행 파일이 현재 프로세
   스에 로드되고, 호출자와 같은 프로세스 ID를 갖게 됩니다. 에러는
   "OSError" 예외로 보고됩니다.

   현재 프로세스가 즉시 교체됩니다. 열린 파일 객체와 기술자는 플러시
   되지 않으므로, 이러한 열린 파일에 버퍼링 된 데이터가 있으면,
   "exec*" 함수를 호출하기 전에 "sys.stdout.flush()" 또는 "os.fsync()"
   를 사용하여 플러시 해야 합니다.

   The "l" and "v" variants of the "exec*" functions differ in how
   command-line arguments are passed.  The "l" variants are perhaps
   the easiest to work with if the number of parameters is fixed when
   the code is written; the individual parameters simply become
   additional parameters to the "execl*()" functions.  The "v"
   variants are good when the number of parameters is variable, with
   the arguments being passed in a list or tuple as the *args*
   parameter.  In either case, the arguments to the child process
   should start with the name of the command being run, but this is
   not enforced.

   The variants which include a "p" near the end ("execlp()",
   "execlpe()", "execvp()", and "execvpe()") will use the "PATH"
   environment variable to locate the program *file*.  When the
   environment is being replaced (using one of the "exec*e" variants,
   discussed in the next paragraph), the new environment is used as
   the source of the "PATH" variable. The other variants, "execl()",
   "execle()", "execv()", and "execve()", will not use the "PATH"
   variable to locate the executable; *path* must contain an
   appropriate absolute or relative path. Relative paths must include
   at least one slash, even on Windows, as plain names will not be
   resolved.

   "execle()", "execlpe()", "execve()", "execvpe()"의 경우 (모두 "e"로
   끝납니다), *env* 매개 변수는 새 프로세스의 환경 변수를 정의하는 데
   사용되는 매핑이어야 합니다 (이것이 현재 프로세스의 환경 대신 사용됩
   니다); 함수 "execl()", "execlp()", "execv()" 및 "execvp()"는 모두
   새 프로세스가 현재 프로세스의 환경을 상속하게 합니다.

   일부 플랫폼에서 "execve()"의 경우, *path* 는 열린 파일 기술자로도
   지정될 수 있습니다. 이 기능은 여러분의 플랫폼에서 지원되지 않을 수
   있습니다; "os.supports_fd"를 사용하여 사용할 수 있는지를 확인할 수
   있습니다. 사용할 수 없을 때, 이를 사용하면 "NotImplementedError"가
   발생합니다.

   "path", "args", "env"를 인자로 감사 이벤트(auditing event)
   "os.exec"를 발생시킵니다.

   가용성: Unix, Windows, not WASI, not Android, not iOS.

   버전 3.3에서 변경: "execve()"의 *path*에 열린 파일 기술자를 지정하
   는 지원이 추가되었습니다.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

os._exit(n)

   상태 *n*으로 프로세스를 종료합니다. 클린업 처리기를 호출하거나,
   stdio 버퍼를 플러시 하거나 등등은 수행하지 않습니다.

   참고:

     The standard way to exit is "sys.exit(n)".  "_exit()" should
     normally only be used in the child process after a "fork()".

필수 조건은 아니지만, 다음 종료 코드가 정의되어 있으며 "_exit()"와 함
께 사용할 수 있습니다. 이것은 메일 서버의 외부 명령 배달 프로그램과 같
이 파이썬으로 작성된 시스템 프로그램에서 일반적으로 사용됩니다.

참고:

  약간의 차이점이 있어서, 이들 중 일부는 모든 유닉스 플랫폼에서 사용하
  지는 못할 수 있습니다. 이 상수는 하부 플랫폼에서 정의될 때만 정의됩
  니다.

os.EX_OK

   Exit code that means no error occurred. May be taken from the
   defined value of "EXIT_SUCCESS" on some platforms. Generally has a
   value of zero.

   가용성: Unix, Windows.

os.EX_USAGE

   잘못된 개수의 인자가 제공된 경우처럼, 명령이 잘못 사용되었음을 나타
   내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_DATAERR

   입력 데이터가 잘못되었음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_NOINPUT

   입력 파일이 없거나 읽을 수 없음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_NOUSER

   지정된 사용자가 존재하지 않음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_NOHOST

   지정된 호스트가 존재하지 않음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_UNAVAILABLE

   필수 서비스를 사용할 수 없음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_SOFTWARE

   내부 소프트웨어 에러가 감지되었음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_OSERR

   포크 하거나 파이프를 만들 수 없는 등, 운영 체제 에러가 감지되었음을
   나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_OSFILE

   일부 시스템 파일이 없거나, 열 수 없거나, 다른 에러가 있음을 나타내
   는 종료 코드.

   가용성: Unix, not WASI.

os.EX_CANTCREAT

   사용자가 지정한 출력 파일을 만들 수 없음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_IOERR

   일부 파일에서 I/O를 수행하는 동안 에러가 발생했음을 나타내는 종료
   코드.

   가용성: Unix, not WASI.

os.EX_TEMPFAIL

   임시 에러가 발생했음을 나타내는 종료 코드. 이는 재시도 가능한 작업
   중에 만들 수 없었던 네트워크 연결과 같이 실제로는 에러가 아닐 수 있
   는 것을 나타냅니다.

   가용성: Unix, not WASI.

os.EX_PROTOCOL

   프로토콜 교환이 불법이거나 유효하지 않거나 이해되지 않았음을 나타내
   는 종료 코드.

   가용성: Unix, not WASI.

os.EX_NOPERM

   작업을 수행할 수 있는 권한이 충분하지 않음을 나타내는 종료 코드 (파
   일 시스템 문제에는 사용하지 않습니다).

   가용성: Unix, not WASI.

os.EX_CONFIG

   어떤 종류의 구성 에러가 발생했음을 나타내는 종료 코드.

   가용성: Unix, not WASI.

os.EX_NOTFOUND

   "항목을 찾을 수 없습니다" 와 같은 것을 의미하는 종료 코드.

   가용성: Unix, not WASI.

os.fork()

   자식 프로세스를 포크 합니다. 자식에서는 "0"을 반환하고, 부모에서는
   자식의 프로세스 ID를 반환합니다. 에러가 발생하면 "OSError"를 일으킵
   니다.

   FreeBSD <= 6.3 및 Cygwin을 포함한 일부 플랫폼은 스레드에서 "fork()"
   를 사용할 때 알려진 문제점이 있습니다.

   인자 없이 감사 이벤트(auditing event) "os.fork"를 발생시킵니다.

   경고:

     If you use TLS sockets in an application calling "fork()", see
     the warning in the "ssl" documentation.

   경고:

     On macOS the use of this function is unsafe when mixed with using
     higher-level system APIs, and that includes using
     "urllib.request".

   버전 3.8에서 변경: 서브 인터프리터에서 "fork()"를 호출하는 것은 더
   는 지원되지 않습니다 ("RuntimeError"가 발생합니다).

   버전 3.12에서 변경: If Python is able to detect that your process
   has multiple threads, "os.fork()" now raises a
   "DeprecationWarning".We chose to surface this as a warning, when
   detectable, to better inform developers of a design problem that
   the POSIX platform specifically notes as not supported. Even in
   code that *appears* to work, it has never been safe to mix
   threading with "os.fork()" on POSIX platforms. The CPython runtime
   itself has always made API calls that are not safe for use in the
   child process when threads existed in the parent (such as "malloc"
   and "free").Users of macOS or users of libc or malloc
   implementations other than those typically found in glibc to date
   are among those already more likely to experience deadlocks running
   such code.See this discussion on fork being incompatible with
   threads for technical details of why we're surfacing this
   longstanding platform compatibility problem to developers.

   가용성: POSIX, not WASI, not Android, not iOS.

os.forkpty()

   새 의사 터미널을 자식의 제어 터미널로 사용하여 자식 프로세스를 포크
   합니다. "(pid, fd)" 쌍을 반환하는데, 여기서 *pid* 는 자식에서 "0"이
   고, 부모에서는 새 자식의 프로세스 ID이고, *fd* 는 의사 터미널의 마
   스터 단의 파일 기술자입니다. 좀 더 이식성 있는 접근법을 사용하려면,
   "pty" 모듈을 사용하십시오. 에러가 발생하면 "OSError"를 일으킵니다.

   인자 없이 감사 이벤트(auditing event) "os.forkpty"를 발생시킵니다.

   경고:

     On macOS the use of this function is unsafe when mixed with using
     higher-level system APIs, and that includes using
     "urllib.request".

   버전 3.8에서 변경: 서브 인터프리터에서 "forkpty()"를 호출하는 것은
   더는 지원되지 않습니다 ("RuntimeError"가 발생합니다).

   버전 3.12에서 변경: If Python is able to detect that your process
   has multiple threads, this now raises a "DeprecationWarning". See
   the longer explanation on "os.fork()".

   가용성: Unix, not WASI, not Android, not iOS.

os.kill(pid, sig, /)

   프로세스 *pid*에 시그널 *sig*를 보냅니다. 호스트 플랫폼에서 사용할
   수 있는 구체적인 시그널에 대한 상수는 "signal" 모듈에 정의되어 있습
   니다.

   Windows: The "signal.CTRL_C_EVENT" and "signal.CTRL_BREAK_EVENT"
   signals are special signals which can only be sent to console
   processes which share a common console window, e.g., some
   subprocesses. Any other value for *sig* will cause the process to
   be unconditionally killed by the TerminateProcess API, and the exit
   code will be set to *sig*.

   "signal.pthread_kill()"도 참조하십시오.

   "pid", "sig"를 인자로 감사 이벤트(auditing event) "os.kill"을 발생
   시킵니다.

   가용성: Unix, Windows, not WASI, not iOS.

   버전 3.2에서 변경: 윈도우 지원이 추가되었습니다.

os.killpg(pgid, sig, /)

   시그널 *sig* 를 프로세스 그룹 *pgid* 로 보냅니다.

   "pgid", "sig"를 인자로 감사 이벤트(auditing event) "os.killpg"를 발
   생시킵니다.

   가용성: Unix, not WASI, not iOS.

os.nice(increment, /)

   프로세스의 "우선도(niceness)"에 *increment* 를 추가합니다. 새로운
   우선도를 반환합니다.

   가용성: Unix, not WASI.

os.pidfd_open(pid, flags=0)

   Return a file descriptor referring to the process *pid* with
   *flags* set. This descriptor can be used to perform process
   management without races and signals.

   자세한 내용은 *pidfd_open(2)* 매뉴얼 페이지를 참조하십시오.

   가용성: Linux >= 5.3, Android >= "build-time" API level 31

   Added in version 3.9.

   os.PIDFD_NONBLOCK

      This flag indicates that the file descriptor will be non-
      blocking. If the process referred to by the file descriptor has
      not yet terminated, then an attempt to wait on the file
      descriptor using *waitid(2)* will immediately return the error
      "EAGAIN" rather than blocking.

   가용성: Linux >= 5.10

   Added in version 3.12.

os.plock(op, /)

   프로그램 세그먼트를 메모리에 잠급니다. ("<sys/lock.h>"에서 정의된)
   *op* 값은 잠기는 세그먼트를 판별합니다.

   가용성: Unix, not WASI, not iOS.

os.popen(cmd, mode='r', buffering=-1)

   Open a pipe to or from command *cmd*. The return value is an open
   file object connected to the pipe, which can be read or written
   depending on whether *mode* is "'r'" (default) or "'w'". The
   *buffering* argument have the same meaning as the corresponding
   argument to the built-in "open()" function. The returned file
   object reads or writes text strings rather than bytes.

   "close" 메서드는 자식 프로세스가 성공적으로 종료되면 "None"을 반환
   하고, 에러가 있으면 자식 프로세스가 반환한 코드를 반환합니다. POSIX
   시스템에서, 반환 코드가 양수면, 프로세스의 반환 값을 1바이트 왼쪽으
   로 시프트 한 값을 나타냅니다. 반환 코드가 음수면, 음의 반환 코드로
   주어진 시그널에 의해 강제 종료된 것입니다. 예를 들어, 자식 프로세스
   가 죽었을(kill) 때 반환 값은 "- signal.SIGKILL" 일 수 있습니다. 윈
   도우 시스템에서, 반환 값은 자식 프로세스의 부호 있는 정수 반환 코드
   를 포함합니다.

   유닉스에서, "waitstatus_to_exitcode()"는 "None"이 아닐 때 "close"
   메서드 결과(종료 상태)를 종료 코드로 변환하는 데 사용할 수 있습니다
   . 윈도우에서, "close" 메서드 결과는 직접 종료 코드(또는 "None")입니
   다.

   이것은 "subprocess.Popen"를 사용하여 구현됩니다; 자식 프로세스를 관
   리하고 통신하는 보다 강력한 방법에 대해서는 이 클래스의 설명서를 참
   조하십시오.

   가용성: not WASI, not Android, not iOS.

   참고:

     The Python UTF-8 Mode affects encodings used for *cmd* and pipe
     contents."popen()" is a simple wrapper around "subprocess.Popen".
     Use "subprocess.Popen" or "subprocess.run()" to control options
     like encodings.

   버전 3.14부터 폐지됨: The function is *soft deprecated* and should
   no longer be used to write new code. The "subprocess" module is
   recommended instead.

os.posix_spawn(path, argv, env, *, file_actions=None, setpgroup=None, resetids=False, setsid=False, setsigmask=(), setsigdef=(), scheduler=None)

   Wraps the "posix_spawn()" C library API for use from Python.

   대부분 사용자는 "posix_spawn()" 대신 "subprocess.run()"을 사용해야
   합니다.

   The positional-only arguments *path*, *args*, and *env* are similar
   to "execve()". *env* is allowed to be "None", in which case current
   process' environment is used.

   *path* 매개 변수는 실행 파일의 경로입니다. *path*에는 디렉터리가 있
   어야 합니다. 디렉터리 없이 실행 파일을 전달하려면 "posix_spawnp()"
   를 사용하십시오.

   *file_actions* 인자는 C 라이브러리 구현의 "fork()"와 "exec()" 단계
   사이의 자식 프로세스에서 특정 파일 기술자에 취할 동작을 설명하는 튜
   플의 시퀀스 일 수 있습니다. 각 튜플의 첫 번째 항목은 나머지 튜플 요
   소를 설명하는, 아래에 나열된 세 가지 형 지시자 중 하나여야 합니다:

   os.POSIX_SPAWN_OPEN

      ("os.POSIX_SPAWN_OPEN", *fd*, *path*, *flags*, *mode*)

      "os.dup2(os.open(path, flags, mode), fd)"를 수행합니다.

   os.POSIX_SPAWN_CLOSE

      ("os.POSIX_SPAWN_CLOSE", *fd*)

      "os.close(fd)"를 수행합니다.

   os.POSIX_SPAWN_DUP2

      ("os.POSIX_SPAWN_DUP2", *fd*, *new_fd*)

      "os.dup2(fd, new_fd)"를 수행합니다.

   os.POSIX_SPAWN_CLOSEFROM

      ("os.POSIX_SPAWN_CLOSEFROM", *fd*)

      Performs "os.closerange(fd, INF)".

   These tuples correspond to the C library
   "posix_spawn_file_actions_addopen()",
   "posix_spawn_file_actions_addclose()",
   "posix_spawn_file_actions_adddup2()", and
   "posix_spawn_file_actions_addclosefrom_np()" API calls used to
   prepare for the "posix_spawn()" call itself.

   The *setpgroup* argument will set the process group of the child to
   the value specified. If the value specified is 0, the child's
   process group ID will be made the same as its process ID. If the
   value of *setpgroup* is not set, the child will inherit the
   parent's process group ID. This argument corresponds to the C
   library "POSIX_SPAWN_SETPGROUP" flag.

   If the *resetids* argument is "True" it will reset the effective
   UID and GID of the child to the real UID and GID of the parent
   process. If the argument is "False", then the child retains the
   effective UID and GID of the parent. In either case, if the set-
   user-ID and set-group-ID permission bits are enabled on the
   executable file, their effect will override the setting of the
   effective UID and GID. This argument corresponds to the C library
   "POSIX_SPAWN_RESETIDS" flag.

   If the *setsid* argument is "True", it will create a new session ID
   for "posix_spawn". *setsid* requires "POSIX_SPAWN_SETSID" or
   "POSIX_SPAWN_SETSID_NP" flag. Otherwise, "NotImplementedError" is
   raised.

   The *setsigmask* argument will set the signal mask to the signal
   set specified. If the parameter is not used, then the child
   inherits the parent's signal mask. This argument corresponds to the
   C library "POSIX_SPAWN_SETSIGMASK" flag.

   The *sigdef* argument will reset the disposition of all signals in
   the set specified. This argument corresponds to the C library
   "POSIX_SPAWN_SETSIGDEF" flag.

   The *scheduler* argument must be a tuple containing the (optional)
   scheduler policy and an instance of "sched_param" with the
   scheduler parameters. A value of "None" in the place of the
   scheduler policy indicates that is not being provided. This
   argument is a combination of the C library
   "POSIX_SPAWN_SETSCHEDPARAM" and "POSIX_SPAWN_SETSCHEDULER" flags.

   "path", "argv", "env"를 인자로 감사 이벤트(auditing event)
   "os.posix_spawn"을 발생시킵니다.

   Added in version 3.8.

   버전 3.13에서 변경: *env* parameter accepts "None".
   "os.POSIX_SPAWN_CLOSEFROM" is available on platforms where
   "posix_spawn_file_actions_addclosefrom_np()" exists.

   가용성: Unix, not WASI, not Android, not iOS.

os.posix_spawnp(path, argv, env, *, file_actions=None, setpgroup=None, resetids=False, setsid=False, setsigmask=(), setsigdef=(), scheduler=None)

   Wraps the "posix_spawnp()" C library API for use from Python.

   시스템이 ("execvp(3)"과 같은 방식으로) "PATH" 환경 변수에 의해 지정
   된 디렉터리 목록에서 *실행* 파일을 검색한다는 점을 제외하고는
   "posix_spawn()"과 유사합니다.

   "path", "argv", "env"를 인자로 감사 이벤트(auditing event)
   "os.posix_spawn"을 발생시킵니다.

   Added in version 3.8.

   가용성: POSIX, not WASI, not Android, not iOS.

   See "posix_spawn()" documentation.

os.register_at_fork(*, before=None, after_in_parent=None, after_in_child=None)

   "os.fork()" 또는 유사한 프로세스 복제 API를 사용하여 새 자식 프로세
   스가 포크 될 때 실행될 콜러블들을 등록합니다. 매개 변수는 선택적이
   며 키워드 전용입니다. 각각은 다른 호출 지점을 지정합니다.

   * *before* 는 자식 프로세스를 포크 하기 전에 호출되는 함수입니다.

   * *after_in_parent* 는 자식 프로세스를 포크 한 후에 부모 프로세스에
     서 호출되는 함수입니다.

   * *after_in_child* 는 자식 프로세스에서 호출되는 함수입니다.

   이러한 호출은 제거가 파이썬 인터프리터로 반환될 것으로 예상되는 경
   우에만 수행됩니다. 일반적인 "subprocess" 실행은 자식이 인터프리터로
   재진입하지 않기 때문에, 이 호출들이 일어나지 않습니다.

   포크 이전에 실행되도록 등록된 함수는 등록 역순으로 실행됩니다. 포크
   후에 실행되도록 등록된 함수(부모나 자식 모두)는 등록 순서로 호출됩
   니다.

   제삼자 C 코드에 의한 "fork()" 호출은, 그것이 명시적으로
   "PyOS_BeforeFork()", "PyOS_AfterFork_Parent()" 및
   "PyOS_AfterFork_Child()"를 호출하지 않는 한, 이 함수들을 호출하지
   않습니다.

   함수 등록을 취소할 방법은 없습니다.

   가용성: Unix, not WASI, not Android, not iOS.

   Added in version 3.7.

os.spawnl(mode, path, ...)
os.spawnle(mode, path, ..., env)
os.spawnlp(mode, file, ...)
os.spawnlpe(mode, file, ..., env)
os.spawnv(mode, path, args)
os.spawnve(mode, path, args, env)
os.spawnvp(mode, file, args)
os.spawnvpe(mode, file, args, env)

   새 프로세스에서 프로그램 *path* 를 실행합니다.

   ("subprocess" 모듈은 새 프로세스를 생성하고 결과를 조회하는데, 더욱
   강력한 기능을 제공합니다; 이 모듈을 사용하는 것이 이 함수들을 사용
   하는 것보다 더 바람직합니다. 특히 이전 함수를 subprocess 모듈로 교
   체하기 섹션을 확인하십시오.)

   *mode* 가 "P_NOWAIT"면, 이 함수는 새 프로세스의 프로세스 ID를 반환
   합니다; *mode*가 "P_WAIT"면, 종료 코드(정상적으로 종료했을 때)나
   "-signal"(*signal*은 프로세스를 죽인 시그널입니다)을 반환합니다. 윈
   도우에서, 프로세스 ID는 실제로 프로세스 핸들이므로, "waitpid()" 함
   수에 사용할 수 있습니다.

   VxWorks에서, 이 함수는 새로운 프로세스가 죽을(kill) 때 "-signal"을
   반환하지 않습니다. 대신 OSError 예외가 발생합니다.

   The "l" and "v" variants of the "spawn*" functions differ in how
   command-line arguments are passed.  The "l" variants are perhaps
   the easiest to work with if the number of parameters is fixed when
   the code is written; the individual parameters simply become
   additional parameters to the "spawnl*()" functions.  The "v"
   variants are good when the number of parameters is variable, with
   the arguments being passed in a list or tuple as the *args*
   parameter.  In either case, the arguments to the child process must
   start with the name of the command being run.

   끝 근처에 두 번째 "p"가 포함된 변형("spawnlp()", "spawnlpe()",
   "spawnvp()" 및 "spawnvpe()")은 "PATH" 환경 변수를 사용하여 프로그램
   *file* 을 찾습니다. 환경이 대체 될 때 (다음 단락에서 설명할
   "spawn*e" 변형 중 하나를 사용하여), 새 환경이 "PATH" 변수의 소스로
   사용됩니다. 다른 변형 "spawnl()", "spawnle()", "spawnv()" 및
   "spawnve()"는 "PATH" 변수를 사용하여 실행 파일을 찾지 않습니다;
   *path* 에는 반드시 적절한 절대 또는 상대 경로가 있어야 합니다.

   "spawnle()", "spawnlpe()", "spawnve()" 및 "spawnvpe()"의 경우 (모두
   "e"로 끝납니다), *env* 매개 변수는 새 프로세스의 환경 변수를 정의하
   는 데 사용되는 매핑이어야 합니다 (이것이 현재 프로세스의 환경 대신
   사용됩니다); 함수 "spawnl()", "spawnlp()", "spawnv()" 및
   "spawnvp()"는 모두 새 프로세스가 현재 프로세스의 환경을 상속하게 합
   니다. *env* 딕셔너리의 키와 값은 반드시 문자열이어야 함에 주의하십
   시오; 잘못된 키나 값은 반환 값 "127"로 함수가 실패하게 합니다.

   예를 들어, "spawnlp()" 및 "spawnvpe()"에 대한 다음 호출은 동등합니
   다:

      import os
      os.spawnlp(os.P_WAIT, 'cp', 'cp', 'index.html', '/dev/null')

      L = ['cp', 'index.html', '/dev/null']
      os.spawnvpe(os.P_WAIT, 'cp', L, os.environ)

   "mode", "path", "args", "env"를 인자로 감사 이벤트(auditing event)
   "os.spawn"을 발생시킵니다.

   가용성: Unix, Windows, not WASI, not Android, not iOS.

   "spawnlp()", "spawnlpe()", "spawnvp()" and "spawnvpe()" are not
   available on Windows.  "spawnle()" and "spawnve()" are not thread-
   safe on Windows; we advise you to use the "subprocess" module
   instead.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

   버전 3.14부터 폐지됨: These functions are *soft deprecated* and
   should no longer be used to write new code. The "subprocess" module
   is recommended instead.

os.P_NOWAIT
os.P_NOWAITO

   Possible values for the *mode* parameter to the "spawn*" family of
   functions.  If either of these values is given, the "spawn*"
   functions will return as soon as the new process has been created,
   with the process id as the return value.

   가용성: Unix, Windows.

os.P_WAIT

   Possible value for the *mode* parameter to the "spawn*" family of
   functions.  If this is given as *mode*, the "spawn*" functions will
   not return until the new process has run to completion and will
   return the exit code of the process the run is successful, or
   "-signal" if a signal kills the process.

   가용성: Unix, Windows.

os.P_DETACH
os.P_OVERLAY

   "spawn*" 계열 함수의 *mode* 매개 변수에 사용할 수 있는 값. 이들은
   위에 나열된 것보다 이식성이 낮습니다. "P_DETACH"는 "P_NOWAIT"와 비
   슷하지만, 새 프로세스는 호출 프로세스의 콘솔에서 분리됩니다.
   "P_OVERLAY"가 사용되면, 현재 프로세스가 대체됩니다; "spawn*" 함수가
   반환되지 않습니다.

   가용성: Windows.

os.startfile(path[, operation][, arguments][, cwd][, show_cmd])

   연관된 응용 프로그램으로 파일을 시작합니다.

   When *operation* is not specified, this acts like double-clicking
   the file in Windows Explorer, or giving the file name as an
   argument to the **start** command from the interactive command
   shell: the file is opened with whatever application (if any) its
   extension is associated.

   When another *operation* is given, it must be a "command verb" that
   specifies what should be done with the file. Common verbs
   documented by Microsoft are "'open'", "'print'" and  "'edit'" (to
   be used on files) as well as "'explore'" and "'find'" (to be used
   on directories).

   When launching an application, specify *arguments* to be passed as
   a single string. This argument may have no effect when using this
   function to launch a document.

   The default working directory is inherited, but may be overridden
   by the *cwd* argument. This should be an absolute path. A relative
   *path* will be resolved against this argument.

   Use *show_cmd* to override the default window style. Whether this
   has any effect will depend on the application being launched.
   Values are integers as supported by the Win32 "ShellExecute()"
   function.

   "startfile()" returns as soon as the associated application is
   launched. There is no option to wait for the application to close,
   and no way to retrieve the application's exit status.  The *path*
   parameter is relative to the current directory or *cwd*.  If you
   want to use an absolute path, make sure the first character is not
   a slash ("'/'")  Use "pathlib" or the "os.path.normpath()" function
   to ensure that paths are properly encoded for Win32.

   To reduce interpreter startup overhead, the Win32 "ShellExecute()"
   function is not resolved until this function is first called.  If
   the function cannot be resolved, "NotImplementedError" will be
   raised.

   "path", "operation"을 인자로 감사 이벤트(auditing event)
   "os.startfile"을 발생시킵니다.

   Raises an auditing event "os.startfile/2" with arguments "path",
   "operation", "arguments", "cwd", "show_cmd".

   가용성: Windows.

   버전 3.10에서 변경: Added the *arguments*, *cwd* and *show_cmd*
   arguments, and the "os.startfile/2" audit event.

os.system(command)

   Execute the command (a string) in a subshell.  This is implemented
   by calling the Standard C function "system()", and has the same
   limitations. Changes to "sys.stdin", etc. are not reflected in the
   environment of the executed command. If *command* generates any
   output, it will be sent to the interpreter standard output stream.
   The C standard does not specify the meaning of the return value of
   the C function, so the return value of the Python function is
   system-dependent.

   On Unix, the return value is the exit status of the process encoded
   in the format specified for "wait()".

   윈도우에서, 반환 값은 *command*를 실행한 후 시스템 셸에서 반환한 값
   입니다. 셸은 윈도우 환경 변수 "COMSPEC"에 의해 제공됩니다: 보통
   **cmd.exe**인데, 명령 실행의 종료 상태를 반환합니다; 기본이 아닌 셸
   을 사용하는 시스템에서는 셸 설명서를 참조하십시오.

   The "subprocess" module provides more powerful facilities for
   spawning new processes and retrieving their results; using that
   module is recommended to using this function.  See the 이전 함수를
   subprocess 모듈로 교체하기 section in the "subprocess"
   documentation for some helpful recipes.

   유닉스에서, "waitstatus_to_exitcode()"를 사용하여 결과(종료 상태)를
   종료 코드로 변환할 수 있습니다. 윈도우에서, 결과는 직접 종료 코드입
   니다.

   "command"를 인자로 감사 이벤트(auditing event) "os.system"을 발생시
   킵니다.

   가용성: Unix, Windows, not WASI, not Android, not iOS.

os.times()

   현재 전역 프로세스 시간을 반환합니다. 반환 값은 5가지 어트리뷰트를
   가진 객체입니다:

   * "user" - user time

   * "system" - system time

   * "children_user" - user time of all child processes

   * "children_system" - system time of all child processes

   * "elapsed" - elapsed real time since a fixed point in the past

   For backwards compatibility, this object also behaves like a five-
   tuple containing "user", "system", "children_user",
   "children_system", and "elapsed" in that order.

   See the Unix manual page *times(2)* and times(3) manual page on
   Unix or the GetProcessTimes MSDN on Windows. On Windows, only
   "user" and "system" are known; the other attributes are zero.

   가용성: Unix, Windows.

   버전 3.3에서 변경: 반환형이 튜플에서 이름이 지정된 어트리뷰트를 가
   진 튜플류 객체로 변경되었습니다.

os.wait()

   자식 프로세스가 완료될 때까지 기다렸다가, pid 및 종료 상태 표시를
   포함하는 튜플을 반환합니다: 종료 상태 표시는 16비트 숫자인데, 하위
   바이트가 프로세스를 죽인 시그널 번호이고, 상위 바이트가 종료 상태(
   시그널 번호가 0이면)입니다; 코어 파일이 생성되면 하위 바이트의 상위
   비트가 설정됩니다.

   If there are no children that could be waited for,
   "ChildProcessError" is raised.

   "waitstatus_to_exitcode()"를 사용하여 종료 상태를 종료 코드로 변환
   할 수 있습니다.

   가용성: Unix, not WASI, not Android, not iOS.

   더 보기:

     The other "wait*()" functions documented below can be used to
     wait for the completion of a specific child process and have more
     options. "waitpid()" is the only one also available on Windows.

os.waitid(idtype, id, options, /)

   Wait for the completion of a child process.

   *idtype* can be "P_PID", "P_PGID", "P_ALL", or (on Linux)
   "P_PIDFD". The interpretation of *id* depends on it; see their
   individual descriptions.

   *options* is an OR combination of flags.  At least one of
   "WEXITED", "WSTOPPED" or "WCONTINUED" is required; "WNOHANG" and
   "WNOWAIT" are additional optional flags.

   The return value is an object representing the data contained in
   the "siginfo_t" structure with the following attributes:

   * "si_pid" (process ID)

   * "si_uid" (real user ID of the child)

   * "si_signo" (always "SIGCHLD")

   * "si_status" (the exit status or signal number, depending on
     "si_code")

   * "si_code" (see "CLD_EXITED" for possible values)

   If "WNOHANG" is specified and there are no matching children in the
   requested state, "None" is returned. Otherwise, if there are no
   matching children that could be waited for, "ChildProcessError" is
   raised.

   가용성: Unix, not WASI, not Android, not iOS.

   Added in version 3.3.

   버전 3.13에서 변경: This function is now available on macOS as
   well.

os.waitpid(pid, options, /)

   이 함수의 세부 사항은 유닉스 및 윈도우에서 다릅니다.

   유닉스에서: 프로세스 ID *pid*에 의해 주어진 자식 프로세스의 완료를
   기다리고, 프로세스 ID와 종료 상태 표시("wait()"처럼 인코딩됨)를 포
   함하는 튜플을 반환합니다. 호출의 의미는 정수 *options* 의 값에 영향
   을 받는데, 일반 작업의 경우 "0" 이어야 합니다.

   *pid* 가 "0"보다 크면, "waitpid()"는 해당 프로세스에 대한 상태 정보
   를 요청합니다. *pid* 가 "0"이면, 현재 프로세스의 프로세스 그룹에 있
   는 모든 자식의 상태를 요청합니다. *pid* 가 "-1"이면, 현재 프로세스
   의 모든 자식의 상태를 요청합니다. *pid* 가 "-1"보다 작으면, 프로세
   스 그룹 "-pid"(*pid* 의 절댓값)에 있는 모든 프로세스의 상태를 요청
   합니다.

   *options* is an OR combination of flags.  If it contains "WNOHANG"
   and there are no matching children in the requested state, "(0, 0)"
   is returned.  Otherwise, if there are no matching children that
   could be waited for, "ChildProcessError" is raised.  Other options
   that can be used are "WUNTRACED" and "WCONTINUED".

   윈도우에서: 프로세스 핸들 *pid*로 지정된 프로세스가 완료될 때까지
   기다리고, *pid*와 종료 상태를 8비트 왼쪽으로 시프트 한 값을 포함하
   는 튜플을 반환합니다 (시프팅이 함수를 더 이식성 있게 만듭니다). "0"
   보다 작거나 같은 *pid* 는 윈도우에서 특별한 의미가 없고 예외가 발생
   합니다. 정수 *options* 의 값은 아무 효과가 없습니다. *pid* 는 id가
   알려진 모든 프로세스를 가리킬 수 있습니다, 반드시 자식 프로세스일
   필요는 없습니다. "P_NOWAIT"로 호출된 "spawn*" 함수는 적절한 프로세
   스 핸들을 반환합니다.

   "waitstatus_to_exitcode()"를 사용하여 종료 상태를 종료 코드로 변환
   할 수 있습니다.

   가용성: Unix, Windows, not WASI, not Android, not iOS.

   버전 3.5에서 변경: 시스템 호출이 인터럽트 되고 시그널 처리기가 예외
   를 발생시키지 않으면, 함수는 이제 "InterruptedError" 예외를 일으키
   는 대신 시스템 호출을 재시도합니다 (이유는 **PEP 475**를 참조하세요
   ).

os.wait3(options)

   Similar to "waitpid()", except no process id argument is given and
   a 3-element tuple containing the child's process id, exit status
   indication, and resource usage information is returned.  Refer to
   "resource.getrusage()" for details on resource usage information.
   The *options* argument is the same as that provided to "waitpid()"
   and "wait4()".

   "waitstatus_to_exitcode()"를 사용하여 종료 상태를 종료 코드로 변환
   할 수 있습니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.wait4(pid, options)

   Similar to "waitpid()", except a 3-element tuple, containing the
   child's process id, exit status indication, and resource usage
   information is returned.  Refer to "resource.getrusage()" for
   details on resource usage information.  The arguments to "wait4()"
   are the same as those provided to "waitpid()".

   "waitstatus_to_exitcode()"를 사용하여 종료 상태를 종료 코드로 변환
   할 수 있습니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.P_PID
os.P_PGID
os.P_ALL
os.P_PIDFD

   These are the possible values for *idtype* in "waitid()". They
   affect how *id* is interpreted:

   * "P_PID" - wait for the child whose PID is *id*.

   * "P_PGID" - wait for any child whose progress group ID is *id*.

   * "P_ALL" - wait for any child; *id* is ignored.

   * "P_PIDFD" - wait for the child identified by the file descriptor
     *id* (a process file descriptor created with "pidfd_open()").

   가용성: Unix, not WASI, not Android, not iOS.

   참고:

     "P_PIDFD" is only available on Linux >= 5.4.

   Added in version 3.3.

   Added in version 3.9: The "P_PIDFD" constant.

os.WCONTINUED

   This *options* flag for "waitpid()", "wait3()", "wait4()", and
   "waitid()" causes child processes to be reported if they have been
   continued from a job control stop since they were last reported.

   가용성: Unix, not WASI, not Android, not iOS.

os.WEXITED

   This *options* flag for "waitid()" causes child processes that have
   terminated to be reported.

   The other "wait*" functions always report children that have
   terminated, so this option is not available for them.

   가용성: Unix, not WASI, not Android, not iOS.

   Added in version 3.3.

os.WSTOPPED

   This *options* flag for "waitid()" causes child processes that have
   been stopped by the delivery of a signal to be reported.

   This option is not available for the other "wait*" functions.

   가용성: Unix, not WASI, not Android, not iOS.

   Added in version 3.3.

os.WUNTRACED

   This *options* flag for "waitpid()", "wait3()", and "wait4()"
   causes child processes to also be reported if they have been
   stopped but their current state has not been reported since they
   were stopped.

   This option is not available for "waitid()".

   가용성: Unix, not WASI, not Android, not iOS.

os.WNOHANG

   This *options* flag causes "waitpid()", "wait3()", "wait4()", and
   "waitid()" to return right away if no child process status is
   available immediately.

   가용성: Unix, not WASI, not Android, not iOS.

os.WNOWAIT

   This *options* flag causes "waitid()" to leave the child in a
   waitable state, so that a later "wait*()" call can be used to
   retrieve the child status information again.

   This option is not available for the other "wait*" functions.

   가용성: Unix, not WASI, not Android, not iOS.

os.CLD_EXITED
os.CLD_KILLED
os.CLD_DUMPED
os.CLD_TRAPPED
os.CLD_STOPPED
os.CLD_CONTINUED

   These are the possible values for "si_code" in the result returned
   by "waitid()".

   가용성: Unix, not WASI, not Android, not iOS.

   Added in version 3.3.

   버전 3.9에서 변경: "CLD_KILLED"와 "CLD_STOPPED" 값을 추가했습니다.

os.waitstatus_to_exitcode(status)

   대기 상태(wait status)를 종료 코드로 변환합니다.

   유닉스에서:

   * 프로세스가 정상적으로 종료되면 ("WIFEXITED(status)"가 참이면), 프
     로세스 종료 상태를 반환합니다 ("WEXITSTATUS(status)"를 반환합니다
     ): 결과는 0보다 크거나 같습니다.

   * 프로세스가 시그널에 의해 종료되면 ("WIFSIGNALED(status)"가 참이면
     ), "-signum"을 반환합니다, 여기서 *signum*은 프로세스를 종료시킨
     시그널 번호입니다 ("-WTERMSIG(status)"를 반환합니다): 결과는 0보
     다 작습니다.

   * 그렇지 않으면, "ValueError"를 발생시킵니다.

   윈도우에서, 8비트만큼 오른쪽으로 시프트된 *status*를 반환합니다.

   유닉스에서, 프로세스가 추적되고 있거나 "waitpid()"가 "WUNTRACED" 옵
   션으로 호출되었으면, 호출자는 먼저 "WIFSTOPPED(status)"가 참인지 확
   인해야 합니다. "WIFSTOPPED(status)"가 참이면 이 함수를 호출하면 안
   됩니다.

   더 보기:

     "WIFEXITED()", "WEXITSTATUS()", "WIFSIGNALED()", "WTERMSIG()",
     "WIFSTOPPED()", "WSTOPSIG()" 함수.

   가용성: Unix, Windows, not WASI, not Android, not iOS.

   Added in version 3.9.

다음 함수들은 "system()", "wait()" 또는 "waitpid()"에 의해 반환된 프로
세스 상태 코드를 매개 변수로 받아들입니다. 이것들은 프로세스의 처리를
결정하는 데 사용될 수 있습니다.

os.WCOREDUMP(status, /)

   프로세스에 대해 코어 덤프가 생성되었으면 "True"를 반환하고, 그렇지
   않으면 "False"를 반환합니다.

   이 함수는 "WIFSIGNALED()"가 참일 때만 사용해야 합니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.WIFCONTINUED(status)

   Return "True" if a stopped child has been resumed by delivery of
   "SIGCONT" (if the process has been continued from a job control
   stop), otherwise return "False".

   "WCONTINUED" 옵션을 참조하십시오.

   가용성: Unix, not WASI, not Android, not iOS.

os.WIFSTOPPED(status)

   시그널의 전달로 인해 프로세스가 중지되었으면 "True"를 반환하고, 그
   렇지 않으면 "False"를 반환합니다.

   "WIFSTOPPED()"는 "WUNTRACED" 옵션을 사용하여 "waitpid()"을 호출했거
   나 프로세스가 추적되고 있을 때만 "True"를 반환합니다 (*ptrace(2)*를
   참조하십시오).

   가용성: Unix, not WASI, not Android, not iOS.

os.WIFSIGNALED(status)

   시그널로 인해 프로세스가 종료되었으면 "True"를 반환하고, 그렇지 않
   으면 "False"를 반환합니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.WIFEXITED(status)

   프로세스가 정상 종료했으면 "True"를 반환합니다, 즉 "exit()"나
   "_exit()"를 호출했거나, "main()"에서 반환하여; 그렇지 않으면
   "False"를 반환합니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.WEXITSTATUS(status)

   프로세스 종료 상태를 반환합니다.

   이 함수는 "WIFEXITED()"가 참일 때만 사용해야 합니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.WSTOPSIG(status)

   프로세스를 멈추게 한 시그널을 반환합니다.

   이 함수는 "WIFSTOPPED()"가 참일 때만 사용해야 합니다.

   가용성: Unix, not WASI, not Android, not iOS.

os.WTERMSIG(status)

   프로세스를 종료시킨 시그널의 번호를 반환합니다.

   이 함수는 "WIFSIGNALED()"가 참일 때만 사용해야 합니다.

   가용성: Unix, not WASI, not Android, not iOS.


스케줄러에 대한 인터페이스
==========================

이 함수들은 운영 체제가 프로세스에 CPU 시간을 할당하는 방법을 제어합니
다. 일부 유닉스 플랫폼에서만 사용할 수 있습니다. 자세한 내용은 유닉스
매뉴얼 페이지를 참조하십시오.

Added in version 3.3.

다음 스케줄 정책은 운영 체제에서 지원하는 경우 공개됩니다.

os.SCHED_OTHER

   기본 스케줄 정책.

os.SCHED_BATCH

   컴퓨터의 나머지 부분에서 반응성을 유지하려고 하는 CPU 집약적인 프로
   세스를 위한 스케줄 정책.

os.SCHED_DEADLINE

   Scheduling policy for tasks with deadline constraints.

   Added in version 3.14.

os.SCHED_IDLE

   매우 낮은 우선순위의 배경 작업에 대한 스케줄 정책.

os.SCHED_NORMAL

   Alias for "SCHED_OTHER".

   Added in version 3.14.

os.SCHED_SPORADIC

   간헐적인 서버 프로그램을 위한 스케줄 정책.

os.SCHED_FIFO

   선입 선출 (First In First Out) 스케줄 정책.

os.SCHED_RR

   라운드 로빈 스케줄 정책.

os.SCHED_RESET_ON_FORK

   이 플래그는 다른 스케줄 정책과 OR 될 수 있습니다. 이 플래그가 설정
   되어있는 프로세스가 포크 할 때, 자식의 스케줄링 정책 및 우선순위가
   기본값으로 재설정됩니다.

class os.sched_param(sched_priority)

   이 클래스는 "sched_setparam()", "sched_setscheduler()", 및
   "sched_getparam()"에서 사용되는 튜닝 가능한 스케줄 파라미터를 나타
   냅니다. 불변입니다.

   현재, 가능한 매개 변수는 하나뿐입니다:

   sched_priority

      스케줄 정책의 스케줄 우선순위.

os.sched_get_priority_min(policy)

   *policy*의 최소 우선순위 값을 가져옵니다. *policy* 는 위의 스케줄
   정책 상수 중 하나입니다.

os.sched_get_priority_max(policy)

   *policy*의 최대 우선순위 값을 가져옵니다. *policy* 는 위의 스케줄
   정책 상수 중 하나입니다.

os.sched_setscheduler(pid, policy, param, /)

   PID가 *pid*인 프로세스의 스케줄 정책을 설정합니다. *pid* 가 0이면,
   호출하는 프로세스를 의미합니다. *policy* 는 위의 스케줄 정책 상수
   중 하나입니다. *param* 은 "sched_param" 인스턴스입니다.

os.sched_getscheduler(pid, /)

   PID가 *pid*인 프로세스의 스케줄 정책을 반환합니다. *pid* 가 0이면,
   호출하는 프로세스를 의미합니다. 결과는 위의 스케줄 정책 상수 중 하
   나입니다.

os.sched_setparam(pid, param, /)

   Set the scheduling parameters for the process with PID *pid*. A
   *pid* of 0 means the calling process. *param* is a "sched_param"
   instance.

os.sched_getparam(pid, /)

   PID가 *pid*인 프로세스의 스케줄 매개 변수를 "sched_param" 인스턴스
   로 반환합니다. *pid* 가 0이면 호출하는 프로세스를 의미합니다.

os.sched_rr_get_interval(pid, /)

   PID가 *pid*인 프로세스의 라운드 로빈 퀀텀을 초 단위로 반환합니다.
   *pid* 가 0이면 호출하는 프로세스를 의미합니다.

os.sched_yield()

   Voluntarily relinquish the CPU. See *sched_yield(2)* for details.

os.sched_setaffinity(pid, mask, /)

   PID가 *pid*인 프로세스(또는 0이면 현재 프로세스)를 CPU 집합으로 제
   한합니다. *mask* 는 프로세스가 제한되어야 하는 CPU 집합을 나타내는
   정수의 이터러블입니다.

os.sched_getaffinity(pid, /)

   Return the set of CPUs the process with PID *pid* is restricted to.

   If *pid* is zero, return the set of CPUs the calling thread of the
   current process is restricted to.

   See also the "process_cpu_count()" function.


기타 시스템 정보
================

os.confstr(name, /)

   문자열 값 시스템 구성 값을 반환합니다. *name* 은 조회할 구성 값을
   지정합니다; 정의된 시스템 값의 이름인 문자열일 수 있습니다; 이 이름
   은 여러 표준(POSIX, 유닉스 95, 유닉스 98 및 기타)에서 지정됩니다.
   일부 플랫폼은 추가 이름도 정의합니다. 호스트 운영 체제에 알려진 이
   름은 "confstr_names" 딕셔너리의 키로 제공됩니다. 해당 매핑에 포함되
   지 않은 구성 변수를 위해, *name*에 정수를 전달하는 것도 허용됩니다.

   *name* 으로 지정된 구성 값이 정의되어 있지 않으면, "None"이 반환됩
   니다.

   *name* 이 문자열이고 알 수 없으면, "ValueError"가 발생합니다.
   *name*에 대한 특정 값이 호스트 시스템에서 지원되지 않으면,
   "confstr_names"에 포함되어 있어도, 에러 번호 "errno.EINVAL"로
   "OSError"가 발생합니다.

   가용성: Unix.

os.confstr_names

   "confstr()"에서 허용하는 이름을 호스트 운영 체제가 해당 이름에 대해
   정의한 정숫값으로 매핑하는 딕셔너리입니다. 이것은 시스템에 알려진
   이름 집합을 판별하는 데 사용될 수 있습니다.

   가용성: Unix.

os.cpu_count()

   Return the number of logical CPUs in the **system**. Returns "None"
   if undetermined.

   The "process_cpu_count()" function can be used to get the number of
   logical CPUs usable by the calling thread of the **current
   process**.

   Added in version 3.4.

   버전 3.13에서 변경: If "-X cpu_count" is given or
   "PYTHON_CPU_COUNT" is set, "cpu_count()" returns the overridden
   value *n*.

os.getloadavg()

   마지막 1, 5, 15분에 걸쳐 평균한 시스템 실행 대기열의 프로세스 수를
   반환하거나, 로드 평균을 얻을 수 없으면, "OSError"를 발생시킵니다.

   가용성: Unix.

os.process_cpu_count()

   Get the number of logical CPUs usable by the calling thread of the
   **current process**. Returns "None" if undetermined. It can be less
   than "cpu_count()" depending on the CPU affinity.

   The "cpu_count()" function can be used to get the number of logical
   CPUs in the **system**.

   If "-X cpu_count" is given or "PYTHON_CPU_COUNT" is set,
   "process_cpu_count()" returns the overridden value *n*.

   See also the "sched_getaffinity()" function.

   Added in version 3.13.

os.sysconf(name, /)

   정숫값 시스템 구성 값을 반환합니다. *name* 으로 지정된 구성 값이 정
   의되어 있지 않으면, "-1"이 반환됩니다. "confstr()"의 *name* 매개 변
   수에 관한 주석은 여기에도 적용됩니다; 알려진 이름에 대한 정보를 제
   공하는 딕셔너리는 "sysconf_names"에 의해 제공됩니다.

   가용성: Unix.

os.sysconf_names

   "sysconf()"에서 허용하는 이름을 호스트 운영 체제가 해당 이름에 대해
   정의한 정숫값으로 매핑하는 딕셔너리입니다. 이것은 시스템에 알려진
   이름 집합을 판별하는 데 사용될 수 있습니다.

   가용성: Unix.

   버전 3.11에서 변경: Add "'SC_MINSIGSTKSZ'" name.

다음 데이터값들은 경로 조작 연산을 지원하는 데 사용됩니다. 이는 모든
플랫폼에서 정의됩니다.

경로명에 대한 고수준 연산은 "os.path" 모듈에서 정의됩니다.

os.curdir

   현재 디렉터리를 가리키기 위해 운영 체제에서 사용하는 상수 문자열.
   이것은 윈도우 및 POSIX의 경우 "'.'"입니다. "os.path"를 통해서도 제
   공됩니다.

os.pardir

   부모 디렉터리를 가리키기 위해 운영 체제에서 사용하는 상수 문자열입
   니다. 이것은 윈도우 및 POSIX의 경우 "'..'"입니다. "os.path"를 통해
   서도 제공됩니다.

os.sep

   경로명 구성 요소를 분리하기 위해 운영 체제에서 사용하는 문자. 이것
   은 POSIX의 경우 "'/'"이고, 윈도우의 경우 "'\\'"입니다. 이것을 아는
   것만으로는 경로명을 구문 분석하거나 이어붙일 수는 없습니다만 ---
   "os.path.split()"와 "os.path.join()"를 사용하세요 --- 가끔 유용합니
   다. "os.path"를 통해서도 제공됩니다.

os.altsep

   경로명 구성 요소를 분리하기 위해 운영 체제에서 사용하는 대체 문자이
   거나, 단 하나의 구분 문자만 있는 경우 "None"입니다. "sep"가 백 슬래
   시인 윈도우 시스템에서는 "'/'"로 설정됩니다. "os.path"를 통해서도
   제공됩니다.

os.extsep

   기본 파일명과 확장자를 구분하는 문자; 예를 들어, "os.py"에서 "'.'".
   "os.path"를 통해서도 제공됩니다.

os.pathsep

   검색 경로 구성 요소("PATH"에서와 같이)를 분리하기 위해 운영 체제에
   서 관습적으로 사용하는 문자, 가령 POSIX의 "':'" 또는 윈도우의
   "';'". "os.path"를 통해서도 제공됩니다.

os.defpath

   환경에 "'PATH'" 키가 없을 때, "exec*p*" 및 "spawn*p*"에서 사용하는
   기본 검색 경로. "os.path"를 통해서도 제공됩니다.

os.linesep

   현재 플랫폼에서 행을 분리(또는 종료)하는 데 사용되는 문자열. 이는
   POSIX의 "'\n'"와 같은 단일 문자이거나, 윈도우의 "'\r\n'"와 같은 여
   러 문자일 수 있습니다. 텍스트 모드로 열린(기본값) 파일에 쓸 때 줄
   종결자로 *os.linesep*를 사용하지 마십시오; 대신 모든 플랫폼에서 단
   일 "'\n'"를 사용하십시오.

os.devnull

   널(null) 장치의 파일 경로. 예를 들어: POSIX의 경우 "'/dev/null'",
   윈도우의 경우 "'nul'". "os.path"를 통해서도 제공됩니다.

os.RTLD_LAZY
os.RTLD_NOW
os.RTLD_GLOBAL
os.RTLD_LOCAL
os.RTLD_NODELETE
os.RTLD_NOLOAD
os.RTLD_DEEPBIND

   "setdlopenflags()" 및 "getdlopenflags()" 함수에 사용하는 플래그. 각
   플래그가 의미하는 바는 유닉스 매뉴얼 페이지 *dlopen(3)*를 참조하십
   시오.

   Added in version 3.3.


난수
====

os.getrandom(size, flags=0)

   최대 *size* 크기의 난수 바이트열을 업습니다. 이 함수는 요청한 것보
   다 짧은 바이트열를 반환할 수 있습니다.

   이 바이트열은 사용자 공간 난수 발생기를 시드 하거나 암호화 목적으로
   사용할 수 있습니다.

   "getrandom()"는 장치 드라이버 및 기타 환경 소음원에서 수집한 엔트로
   피에 의존합니다. 대량의 데이터를 불필요하게 읽는 것은 "/dev/random"
   및 "/dev/urandom" 장치의 다른 사용자에게 부정적인 영향을 미칩니다.

   The flags argument is a bit mask that can contain zero or more of
   the following values ORed together: "os.GRND_RANDOM" and
   "GRND_NONBLOCK".

   See also the Linux getrandom() manual page.

   가용성: Linux >= 3.17.

   Added in version 3.6.

os.urandom(size, /)

   Return a bytestring of *size* random bytes suitable for
   cryptographic use.

   이 함수는 OS 종속적인 임의성 소스에서 난수 바이트열을 반환합니다.
   반환된 데이터는 암호화 응용에 충분하도록 예측할 수 없어야 하지만,
   정확한 품질은 OS 구현에 따라 달라집니다.

   리눅스에서, "getrandom()" 시스템 호출을 사용할 수 있으면, 블로킹 모
   드로 사용됩니다: 시스템의 urandom 엔트로피 풀이 초기화될 때까지 블
   록 됩니다 (커널이 128비트의 엔트로피를 수집합니다). 이유는 **PEP
   524**를 참조하십시오. 리눅스에서, "getrandom()" 함수는
   ("GRND_NONBLOCK" 플래그를 사용하여) 비 블로킹 모드로 난수 바이트열
   을 얻거나, 시스템 urandom 엔트로피 풀이 초기화될 때까지 폴링 할 수
   있습니다.

   유닉스류 시스템에서, "/dev/urandom" 장치에서 난수 바이트열을 읽습니
   다. "/dev/urandom" 장치를 사용할 수 없거나 읽을 수 없으면,
   "NotImplementedError" 예외가 발생합니다.

   On Windows, it will use "BCryptGenRandom()".

   더 보기:

     "secrets" 모듈은 고수준 함수를 제공합니다. 플랫폼에서 제공되는 난
     수 발생기에 대한 사용하기 쉬운 인터페이스는 "random.SystemRandom"
     를 참조하십시오.

   버전 3.5에서 변경: 리눅스 3.17 및 이후 버전에서, 이제 "getrandom()"
   시스템 호출을 사용할 수 있으면 사용합니다. OpenBSD 5.6 이상에서, C
   "getentropy()" 함수가 이제 사용됩니다. 이 함수들은 내부 파일 기술자
   의 사용을 피합니다.

   버전 3.5.2에서 변경: 리눅스에서, "getrandom()" 시스템 호출이 블록
   하면 (urandom 엔트로피 풀이 아직 초기화되지 않았으면),
   "/dev/urandom"을 읽는 것으로 대체됩니다.

   버전 3.6에서 변경: 리눅스에서, "getrandom()"은 이제 보안을 강화하기
   위해 블로킹 모드로 사용됩니다.

   버전 3.11에서 변경: On Windows, "BCryptGenRandom()" is used instead
   of "CryptGenRandom()" which is deprecated.

os.GRND_NONBLOCK

   기본적으로, "/dev/random"에서 읽을 때, "getrandom()"는 사용할 수 있
   는 난수 바이트열이 없으면 블록 하고, "/dev/urandom"에서 읽을 때는,
   엔트로피 풀이 아직 초기화되지 않았으면 블록 합니다.

   "GRND_NONBLOCK" 플래그가 설정되면, "getrandom()"는 이럴 때 블록 하
   지 않고, 대신 즉시 "BlockingIOError"를 발생시킵니다.

   Added in version 3.6.

os.GRND_RANDOM

   이 비트가 설정되면, "/dev/urandom" 풀 대신 "/dev/random" 풀에서 난
   수 바이트열을 얻습니다.

   Added in version 3.6.
