파이썬 초기화 구성
******************


PyInitConfig C API
==================

Added in version 3.14.

Python can be initialized with "Py_InitializeFromInitConfig()".

The "Py_RunMain()" function can be used to write a customized Python
program.

초기화, 파이널리제이션 및 스레드도 참조하십시오.

더 보기: **PEP 741** "Python Configuration C API".


Example
-------

Example of customized Python always running with the Python
Development Mode enabled; return "-1" on error:

   int init_python(void)
   {
       PyInitConfig *config = PyInitConfig_Create();
       if (config == NULL) {
           printf("PYTHON INIT ERROR: memory allocation failed\n");
           return -1;
       }

       // Enable the Python Development Mode
       if (PyInitConfig_SetInt(config, "dev_mode", 1) < 0) {
           goto error;
       }

       // Initialize Python with the configuration
       if (Py_InitializeFromInitConfig(config) < 0) {
           goto error;
       }
       PyInitConfig_Free(config);
       return 0;

   error:
       {
           // Display the error message.
           //
           // This uncommon braces style is used, because you cannot make
           // goto targets point to variable declarations.
           const char *err_msg;
           (void)PyInitConfig_GetError(config, &err_msg);
           printf("PYTHON INIT ERROR: %s\n", err_msg);
           PyInitConfig_Free(config);
           return -1;
       }
   }


Create Config
-------------

struct PyInitConfig

   Opaque structure to configure the Python initialization.

PyInitConfig *PyInitConfig_Create(void)

   Create a new initialization configuration using Isolated
   Configuration default values.

   It must be freed by "PyInitConfig_Free()".

   Return "NULL" on memory allocation failure.

void PyInitConfig_Free(PyInitConfig *config)

   Free memory of the initialization configuration *config*.

   If *config* is "NULL", no operation is performed.


Error Handling
--------------

int PyInitConfig_GetError(PyInitConfig *config, const char **err_msg)

   Get the *config* error message.

   * Set **err_msg* and return "1" if an error is set.

   * Set **err_msg* to "NULL" and return "0" otherwise.

   An error message is an UTF-8 encoded string.

   If *config* has an exit code, format the exit code as an error
   message.

   The error message remains valid until another "PyInitConfig"
   function is called with *config*. The caller doesn't have to free
   the error message.

int PyInitConfig_GetExitCode(PyInitConfig *config, int *exitcode)

   Get the *config* exit code.

   * Set **exitcode* and return "1" if *config* has an exit code set.

   * Return "0" if *config* has no exit code set.

   Only the "Py_InitializeFromInitConfig()" function can set an exit
   code if the "parse_argv" option is non-zero.

   An exit code can be set when parsing the command line failed (exit
   code "2") or when a command line option asks to display the command
   line help (exit code "0").


Get Options
-----------

The configuration option *name* parameter must be a non-NULL null-
terminated UTF-8 encoded string. See Configuration Options.

int PyInitConfig_HasOption(PyInitConfig *config, const char *name)

   Test if the configuration has an option called *name*.

   Return "1" if the option exists, or return "0" otherwise.

int PyInitConfig_GetInt(PyInitConfig *config, const char *name, int64_t *value)

   Get an integer configuration option.

   * Set **value*, and return "0" on success.

   * Set an error in *config* and return "-1" on error.

int PyInitConfig_GetStr(PyInitConfig *config, const char *name, char **value)

   Get a string configuration option as a null-terminated UTF-8
   encoded string.

   * Set **value*, and return "0" on success.

   * Set an error in *config* and return "-1" on error.

   **value* can be set to "NULL" if the option is an optional string
   and the option is unset.

   On success, the string must be released with "free(value)" if it's
   not "NULL".

int PyInitConfig_GetStrList(PyInitConfig *config, const char *name, size_t *length, char ***items)

   Get a string list configuration option as an array of null-
   terminated UTF-8 encoded strings.

   * Set **length* and **value*, and return "0" on success.

   * Set an error in *config* and return "-1" on error.

   On success, the string list must be released with
   "PyInitConfig_FreeStrList(length, items)".

void PyInitConfig_FreeStrList(size_t length, char **items)

   Free memory of a string list created by
   "PyInitConfig_GetStrList()".


Set Options
-----------

The configuration option *name* parameter must be a non-NULL null-
terminated UTF-8 encoded string. See Configuration Options.

Some configuration options have side effects on other options. This
logic is only implemented when "Py_InitializeFromInitConfig()" is
called, not by the "Set" functions below. For example, setting
"dev_mode" to "1" does not set "faulthandler" to "1".

int PyInitConfig_SetInt(PyInitConfig *config, const char *name, int64_t value)

   Set an integer configuration option.

   * Return "0" on success.

   * Set an error in *config* and return "-1" on error.

int PyInitConfig_SetStr(PyInitConfig *config, const char *name, const char *value)

   Set a string configuration option from a null-terminated UTF-8
   encoded string. The string is copied.

   * Return "0" on success.

   * Set an error in *config* and return "-1" on error.

int PyInitConfig_SetStrList(PyInitConfig *config, const char *name, size_t length, char *const *items)

   Set a string list configuration option from an array of null-
   terminated UTF-8 encoded strings. The string list is copied.

   * Return "0" on success.

   * Set an error in *config* and return "-1" on error.


Module
------

int PyInitConfig_AddModule(PyInitConfig *config, const char *name, PyObject *(*initfunc)(void))

   Add a built-in extension module to the table of built-in modules.

   The new module can be imported by the name *name*, and uses the
   function *initfunc* as the initialization function called on the
   first attempted import.

   * Return "0" on success.

   * Set an error in *config* and return "-1" on error.

   If Python is initialized multiple times, "PyInitConfig_AddModule()"
   must be called at each Python initialization.

   Similar to the "PyImport_AppendInittab()" function.


Initialize Python
-----------------

int Py_InitializeFromInitConfig(PyInitConfig *config)

   Initialize Python from the initialization configuration.

   * Return "0" on success.

   * Set an error in *config* and return "-1" on error.

   * Set an exit code in *config* and return "-1" if Python wants to
     exit.

   See "PyInitConfig_GetExitcode()" for the exit code case.


Configuration Options
=====================

+---------------------------+---------------------------+---------------------------+---------------------------+
| Option                    | PyConfig/PyPreConfig      | Type                      | Visibility                |
|                           | member                    |                           |                           |
|===========================|===========================|===========================|===========================|
| ""allocator""             | "allocator"               | "int"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""argv""                  | "argv"                    | "list[str]"               | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""base_exec_prefix""      | "base_exec_prefix"        | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""base_executable""       | "base_executable"         | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""base_prefix""           | "base_prefix"             | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""buffered_stdio""        | "buffered_stdio"          | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""bytes_warning""         | "bytes_warning"           | "int"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""check_hash_pycs_mode""  | "check_hash_pycs_mode"    | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""code_debug_ranges""     | "code_debug_ranges"       | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""coerce_c_locale""       | "coerce_c_locale"         | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""coerce_c_locale_warn""  | "coerce_c_locale_warn"    | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""configure_c_stdio""     | "configure_c_stdio"       | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""configure_locale""      | "configure_locale"        | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""cpu_count""             | "cpu_count"               | "int"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""dev_mode""              | "dev_mode"                | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""dump_refs""             | "dump_refs"               | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""dump_refs_file""        | "dump_refs_file"          | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""exec_prefix""           | "exec_prefix"             | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""executable""            | "executable"              | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""faulthandler""          | "faulthandler"            | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""filesystem_encoding""   | "filesystem_encoding"     | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""filesystem_errors""     | "filesystem_errors"       | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""hash_seed""             | "hash_seed"               | "int"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""home""                  | "home"                    | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""import_time""           | "import_time"             | "int"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""inspect""               | "inspect"                 | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""install_signal_handler  | "install_signal_handlers" | "bool"                    | Read-only                 |
| s""                       |                           |                           |                           |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""int_max_str_digits""    | "int_max_str_digits"      | "int"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""interactive""           | "interactive"             | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""isolated""              | "isolated"                | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""legacy_windows_fs_enco  | "legacy_windows_fs_encod  | "bool"                    | Read-only                 |
| ding""                    | ing"                      |                           |                           |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""legacy_windows_stdio""  | "legacy_windows_stdio"    | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""malloc_stats""          | "malloc_stats"            | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""module_search_paths""   | "module_search_paths"     | "list[str]"               | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""optimization_level""    | "optimization_level"      | "int"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""orig_argv""             | "orig_argv"               | "list[str]"               | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""parse_argv""            | "parse_argv"              | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""parser_debug""          | "parser_debug"            | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""pathconfig_warnings""   | "pathconfig_warnings"     | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""perf_profiling""        | "perf_profiling"          | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""platlibdir""            | "platlibdir"              | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""prefix""                | "prefix"                  | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""program_name""          | "program_name"            | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""pycache_prefix""        | "pycache_prefix"          | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""quiet""                 | "quiet"                   | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""run_command""           | "run_command"             | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""run_filename""          | "run_filename"            | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""run_module""            | "run_module"              | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""run_presite""           | "run_presite"             | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""safe_path""             | "safe_path"               | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""show_ref_count""        | "show_ref_count"          | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""site_import""           | "site_import"             | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""skip_source_first_line  | "skip_source_first_line"  | "bool"                    | Read-only                 |
| ""                        |                           |                           |                           |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""stdio_encoding""        | "stdio_encoding"          | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""stdio_errors""          | "stdio_errors"            | "str"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""stdlib_dir""            | "stdlib_dir"              | "str"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""tracemalloc""           | "tracemalloc"             | "int"                     | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""use_environment""       | "use_environment"         | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""use_frozen_modules""    | "use_frozen_modules"      | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""use_hash_seed""         | "use_hash_seed"           | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""use_system_logger""     | "use_system_logger"       | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""user_site_directory""   | "user_site_directory"     | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""utf8_mode""             | "utf8_mode"               | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""verbose""               | "verbose"                 | "int"                     | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""warn_default_encoding"" | "warn_default_encoding"   | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""warnoptions""           | "warnoptions"             | "list[str]"               | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""write_bytecode""        | "write_bytecode"          | "bool"                    | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""xoptions""              | "xoptions"                | "dict[str, str]"          | Public                    |
+---------------------------+---------------------------+---------------------------+---------------------------+
| ""_pystats""              | "_pystats"                | "bool"                    | Read-only                 |
+---------------------------+---------------------------+---------------------------+---------------------------+

Visibility:

* Public: Can by get by "PyConfig_Get()" and set by "PyConfig_Set()".

* Read-only: Can by get by "PyConfig_Get()", but cannot be set by
  "PyConfig_Set()".


Runtime Python configuration API
================================

At runtime, it's possible to get and set configuration options using
"PyConfig_Get()" and  "PyConfig_Set()" functions.

The configuration option *name* parameter must be a non-NULL null-
terminated UTF-8 encoded string. See Configuration Options.

Some options are read from the "sys" attributes. For example, the
option ""argv"" is read from "sys.argv".

PyObject *PyConfig_Get(const char *name)

   Get the current runtime value of a configuration option as a Python
   object.

   * Return a new reference on success.

   * Set an exception and return "NULL" on error.

   The object type depends on the configuration option. It can be:

   * "bool"

   * "int"

   * "str"

   * "list[str]"

   * "dict[str, str]"

   The caller must have an *attached thread state*. The function
   cannot be called before Python initialization nor after Python
   finalization.

   Added in version 3.14.

int PyConfig_GetInt(const char *name, int *value)

   Similar to "PyConfig_Get()", but get the value as a C int.

   * Return "0" on success.

   * Set an exception and return "-1" on error.

   Added in version 3.14.

PyObject *PyConfig_Names(void)

   Get all configuration option names as a "frozenset".

   * Return a new reference on success.

   * Set an exception and return "NULL" on error.

   The caller must have an *attached thread state*. The function
   cannot be called before Python initialization nor after Python
   finalization.

   Added in version 3.14.

int PyConfig_Set(const char *name, PyObject *value)

   Set the current runtime value of a configuration option.

   * Raise a "ValueError" if there is no option *name*.

   * Raise a "ValueError" if *value* is an invalid value.

   * Raise a "ValueError" if the option is read-only (cannot be set).

   * Raise a "TypeError" if *value* has not the proper type.

   The caller must have an *attached thread state*. The function
   cannot be called before Python initialization nor after Python
   finalization.

   Raises an auditing event "cpython.PyConfig_Set" with arguments
   "name", "value".

   Added in version 3.14.


PyConfig C API
==============

Added in version 3.8.

Python can be initialized with "Py_InitializeFromConfig()" and the
"PyConfig" structure. It can be preinitialized with
"Py_PreInitialize()" and the "PyPreConfig" structure.

There are two kinds of configuration:

* The Python Configuration can be used to build a customized Python
  which behaves as the regular Python. For example, environment
  variables and command line arguments are used to configure Python.

* The Isolated Configuration can be used to embed Python into an
  application. It isolates Python from the system. For example,
  environment variables are ignored, the LC_CTYPE locale is left
  unchanged and no signal handler is registered.

The "Py_RunMain()" function can be used to write a customized Python
program.

초기화, 파이널리제이션 및 스레드도 참조하십시오.

더 보기: **PEP 587** "파이썬 초기화 구성".


Example
-------

항상 격리 모드에서 실행되는 사용자 정의 파이썬의 예:

   int main(int argc, char **argv)
   {
       PyStatus status;

       PyConfig config;
       PyConfig_InitPythonConfig(&config);
       config.isolated = 1;

       /* Decode command line arguments.
          Implicitly preinitialize Python (in isolated mode). */
       status = PyConfig_SetBytesArgv(&config, argc, argv);
       if (PyStatus_Exception(status)) {
           goto exception;
       }

       status = Py_InitializeFromConfig(&config);
       if (PyStatus_Exception(status)) {
           goto exception;
       }
       PyConfig_Clear(&config);

       return Py_RunMain();

   exception:
       PyConfig_Clear(&config);
       if (PyStatus_IsExit(status)) {
           return status.exitcode;
       }
       /* Display the error message and exit the process with
          non-zero exit code */
       Py_ExitStatusException(status);
   }


PyWideStringList
----------------

type PyWideStringList

   "wchar_t*" 문자열의 리스트.

   *length*가 0이 아니면, *items*는 "NULL"이 아니어야 하고 모든 문자열
   은 "NULL"이 아니어야 합니다.

   메서드:

   PyStatus PyWideStringList_Append(PyWideStringList *list, const wchar_t *item)

      *item*을 *list*에 추가합니다.

      이 함수를 호출하려면 파이썬을 사전 초기화해야 합니다.

   PyStatus PyWideStringList_Insert(PyWideStringList *list, Py_ssize_t index, const wchar_t *item)

      *item*을 *list*의 *index*에 삽입합니다.

      *index*가 *list* 길이보다 크거나 같으면, *item*을 *list*에 추가
      (append)합니다.

      *index* must be greater than or equal to "0".

      이 함수를 호출하려면 파이썬을 사전 초기화해야 합니다.

   구조체 필드:

   Py_ssize_t length

      리스트 길이.

   wchar_t **items

      리스트 항목들.


PyStatus
--------

type PyStatus

   초기화 함수 상태를 저장하는 구조체: 성공, 에러 또는 종료.

   에러의 경우, 에러를 만든 C 함수 이름을 저장할 수 있습니다.

   구조체 필드:

   int exitcode

      종료 코드. "exit()"에 전달된 인자.

   const char *err_msg

      에러 메시지.

   const char *func

      에러를 만든 함수의 이름, "NULL"일 수 있습니다.

   상태를 만드는 함수:

   PyStatus PyStatus_Ok(void)

      성공.

   PyStatus PyStatus_Error(const char *err_msg)

      메시지가 포함된 초기화 에러.

      *err_msg* must not be "NULL".

   PyStatus PyStatus_NoMemory(void)

      메모리 할당 실패 (메모리 부족).

   PyStatus PyStatus_Exit(int exitcode)

      지정된 종료 코드로 파이썬을 종료합니다.

   상태를 처리하는 함수:

   int PyStatus_Exception(PyStatus status)

      상태가 에러입니까? 아니면 종료입니까? 참이면, 예외를 처리해야 합
      니다; 예를 들어 "Py_ExitStatusException()" 을 호출하여.

   int PyStatus_IsError(PyStatus status)

      결과가 에러입니까?

   int PyStatus_IsExit(PyStatus status)

      결과가 종료입니까?

   void Py_ExitStatusException(PyStatus status)

      *status*가 종료이면 "exit(exitcode)"를 호출합니다. *status*가 에
      러이면 에러 메시지를 인쇄하고 0이 아닌 종료 코드로 종료합니다.
      "PyStatus_Exception(status)"가 0이 아닐 때만 호출해야 합니다.

참고:

  내부적으로, 파이썬은 "PyStatus.func"를 설정하는 데는 매크로를 사용하
  는 반면, "func"가 "NULL"로 설정된 상태를 만드는 데는 함수를 사용합니
  다.

예:

   PyStatus alloc(void **ptr, size_t size)
   {
       *ptr = PyMem_RawMalloc(size);
       if (*ptr == NULL) {
           return PyStatus_NoMemory();
       }
       return PyStatus_Ok();
   }

   int main(int argc, char **argv)
   {
       void *ptr;
       PyStatus status = alloc(&ptr, 16);
       if (PyStatus_Exception(status)) {
           Py_ExitStatusException(status);
       }
       PyMem_Free(ptr);
       return 0;
   }


PyPreConfig
-----------

type PyPreConfig

   Structure used to preinitialize Python.

   사전 구성을 초기화하는 함수:

   void PyPreConfig_InitPythonConfig(PyPreConfig *preconfig)

      파이썬 구성으로 사전 구성을 초기화합니다.

   void PyPreConfig_InitIsolatedConfig(PyPreConfig *preconfig)

      격리된 구성으로 사전 구성을 초기화합니다.

   구조체 필드:

   int allocator

      Name of the Python memory allocators:

      * "PYMEM_ALLOCATOR_NOT_SET" ("0"): don't change memory
        allocators (use defaults).

      * "PYMEM_ALLOCATOR_DEFAULT" ("1"): default memory allocators.

      * "PYMEM_ALLOCATOR_DEBUG" ("2"): default memory allocators with
        debug hooks.

      * "PYMEM_ALLOCATOR_MALLOC" ("3"): use "malloc()" of the C
        library.

      * "PYMEM_ALLOCATOR_MALLOC_DEBUG" ("4"): force usage of
        "malloc()" with debug hooks.

      * "PYMEM_ALLOCATOR_PYMALLOC" ("5"): Python pymalloc memory
        allocator.

      * "PYMEM_ALLOCATOR_PYMALLOC_DEBUG" ("6"): Python pymalloc memory
        allocator with debug hooks.

      * "PYMEM_ALLOCATOR_MIMALLOC" ("6"): use "mimalloc", a fast
        malloc replacement.

      * "PYMEM_ALLOCATOR_MIMALLOC_DEBUG" ("7"): use "mimalloc", a fast
        malloc replacement with debug hooks.

      "PYMEM_ALLOCATOR_PYMALLOC" and "PYMEM_ALLOCATOR_PYMALLOC_DEBUG"
      are not supported if Python is "configured using --without-
      pymalloc".

      "PYMEM_ALLOCATOR_MIMALLOC" and "PYMEM_ALLOCATOR_MIMALLOC_DEBUG"
      are not supported if Python is "configured using --without-
      mimalloc" or if the underlying atomic support isn't available.

      메모리 관리를 참조하십시오.

      Default: "PYMEM_ALLOCATOR_NOT_SET".

   int configure_locale

      Set the LC_CTYPE locale to the user preferred locale.

      If equals to "0", set "coerce_c_locale" and
      "coerce_c_locale_warn" members to "0".

      See the *locale encoding*.

      Default: "1" in Python config, "0" in isolated config.

   int coerce_c_locale

      If equals to "2", coerce the C locale.

      If equals to "1", read the LC_CTYPE locale to decide if it
      should be coerced.

      See the *locale encoding*.

      Default: "-1" in Python config, "0" in isolated config.

   int coerce_c_locale_warn

      0이 아니면, C 로케일이 강제될 때 경고가 발생합니다.

      Default: "-1" in Python config, "0" in isolated config.

   int dev_mode

      Python Development Mode: see "PyConfig.dev_mode".

      Default: "-1" in Python mode, "0" in isolated mode.

   int isolated

      Isolated mode: see "PyConfig.isolated".

      Default: "0" in Python mode, "1" in isolated mode.

   int legacy_windows_fs_encoding

      If non-zero:

      * Set "PyPreConfig.utf8_mode" to "0",

      * Set "PyConfig.filesystem_encoding" to ""mbcs"",

      * Set "PyConfig.filesystem_errors" to ""replace"".

      Initialized from the "PYTHONLEGACYWINDOWSFSENCODING" environment
      variable value.

      윈도우에서만 사용 가능합니다. "#ifdef MS_WINDOWS" 매크로는 윈도
      우 특정 코드에 사용할 수 있습니다.

      Default: "0".

   int parse_argv

      0이 아니면, "Py_PreInitializeFromArgs()"와
      "Py_PreInitializeFromBytesArgs()"는 일반 파이썬이 명령 줄 인자를
      구문 분석하는 것과 같은 방식으로 "argv" 인자를 구문 분석합니다.
      명령 줄 인자를 참조하십시오.

      Default: "1" in Python config, "0" in isolated config.

   int use_environment

      Use environment variables? See "PyConfig.use_environment".

      Default: "1" in Python config and "0" in isolated config.

   int utf8_mode

      If non-zero, enable the Python UTF-8 Mode.

      Set to "0" or "1" by the "-X utf8" command line option and the
      "PYTHONUTF8" environment variable.

      Also set to "1" if the "LC_CTYPE" locale is "C" or "POSIX".

      Default: "-1" in Python config and "0" in isolated config.


Preinitialize Python with PyPreConfig
-------------------------------------

The preinitialization of Python:

* Set the Python memory allocators ("PyPreConfig.allocator")

* Configure the LC_CTYPE locale (*locale encoding*)

* Set the Python UTF-8 Mode ("PyPreConfig.utf8_mode")

The current preconfiguration ("PyPreConfig" type) is stored in
"_PyRuntime.preconfig".

파이썬을 사전 초기화하는 함수:

PyStatus Py_PreInitialize(const PyPreConfig *preconfig)

   *preconfig* 사전 구성에서 파이썬을 사전 초기화합니다.

   *preconfig* must not be "NULL".

PyStatus Py_PreInitializeFromBytesArgs(const PyPreConfig *preconfig, int argc, char *const *argv)

   *preconfig* 사전 구성에서 파이썬을 사전 초기화합니다.

   Parse *argv* command line arguments (bytes strings) if "parse_argv"
   of *preconfig* is non-zero.

   *preconfig* must not be "NULL".

PyStatus Py_PreInitializeFromArgs(const PyPreConfig *preconfig, int argc, wchar_t *const *argv)

   *preconfig* 사전 구성에서 파이썬을 사전 초기화합니다.

   Parse *argv* command line arguments (wide strings) if "parse_argv"
   of *preconfig* is non-zero.

   *preconfig* must not be "NULL".

호출자는 "PyStatus_Exception()"과 "Py_ExitStatusException()" 을 사용하
여 예외(에러나 종료)를 처리해야 합니다.

For Python Configuration ("PyPreConfig_InitPythonConfig()"), if Python
is initialized with command line arguments, the command line arguments
must also be passed to preinitialize Python, since they have an effect
on the pre-configuration like encodings. For example, the "-X utf8"
command line option enables the Python UTF-8 Mode.

"PyMem_SetAllocator()"는 "Py_PreInitialize()" 이후에
"Py_InitializeFromConfig()" 이전에 호출하여 사용자 정의 메모리 할당자
를 설치할 수 있습니다. "PyPreConfig.allocator"가
"PYMEM_ALLOCATOR_NOT_SET"으로 설정되면 "Py_PreInitialize()" 전에 호출
할 수 있습니다.

Python memory allocation functions like "PyMem_RawMalloc()" must not
be used before the Python preinitialization, whereas calling directly
"malloc()" and "free()" is always safe. "Py_DecodeLocale()" must not
be called before the Python preinitialization.

Example using the preinitialization to enable the Python UTF-8 Mode:

   PyStatus status;
   PyPreConfig preconfig;
   PyPreConfig_InitPythonConfig(&preconfig);

   preconfig.utf8_mode = 1;

   status = Py_PreInitialize(&preconfig);
   if (PyStatus_Exception(status)) {
       Py_ExitStatusException(status);
   }

   /* at this point, Python speaks UTF-8 */

   Py_Initialize();
   /* ... use Python API here ... */
   Py_Finalize();


PyConfig
--------

type PyConfig

   파이썬을 구성하기 위한 대부분의 파라미터를 포함하는 구조체.

   When done, the "PyConfig_Clear()" function must be used to release
   the configuration memory.

   구조체 메서드:

   void PyConfig_InitPythonConfig(PyConfig *config)

      Initialize configuration with the Python Configuration.

   void PyConfig_InitIsolatedConfig(PyConfig *config)

      Initialize configuration with the Isolated Configuration.

   PyStatus PyConfig_SetString(PyConfig *config, wchar_t *const *config_str, const wchar_t *str)

      와이드 문자열 *str*을 "*config_str"로 복사합니다.

      Preinitialize Python if needed.

   PyStatus PyConfig_SetBytesString(PyConfig *config, wchar_t *const *config_str, const char *str)

      Decode *str* using "Py_DecodeLocale()" and set the result into
      "*config_str".

      Preinitialize Python if needed.

   PyStatus PyConfig_SetArgv(PyConfig *config, int argc, wchar_t *const *argv)

      Set command line arguments ("argv" member of *config*) from the
      *argv* list of wide character strings.

      Preinitialize Python if needed.

   PyStatus PyConfig_SetBytesArgv(PyConfig *config, int argc, char *const *argv)

      Set command line arguments ("argv" member of *config*) from the
      *argv* list of bytes strings. Decode bytes using
      "Py_DecodeLocale()".

      Preinitialize Python if needed.

   PyStatus PyConfig_SetWideStringList(PyConfig *config, PyWideStringList *list, Py_ssize_t length, wchar_t **items)

      와이드 문자열 리스트 *list*를 *length*와 *items*로 설정합니다.

      Preinitialize Python if needed.

   PyStatus PyConfig_Read(PyConfig *config)

      모든 파이썬 구성을 읽습니다.

      이미 초기화된 필드는 변경되지 않습니다.

      Fields for path configuration are no longer calculated or
      modified when calling this function, as of Python 3.11.

      The "PyConfig_Read()" function only parses "PyConfig.argv"
      arguments once: "PyConfig.parse_argv" is set to "2" after
      arguments are parsed. Since Python arguments are stripped from
      "PyConfig.argv", parsing arguments twice would parse the
      application options as Python options.

      Preinitialize Python if needed.

      버전 3.10에서 변경: The "PyConfig.argv" arguments are now only
      parsed once, "PyConfig.parse_argv" is set to "2" after arguments
      are parsed, and arguments are only parsed if
      "PyConfig.parse_argv" equals "1".

      버전 3.11에서 변경: "PyConfig_Read()" no longer calculates all
      paths, and so fields listed under Python Path Configuration may
      no longer be updated until "Py_InitializeFromConfig()" is
      called.

   void PyConfig_Clear(PyConfig *config)

      구성 메모리를 해제합니다.

   Most "PyConfig" methods preinitialize Python if needed. In that
   case, the Python preinitialization configuration ("PyPreConfig") in
   based on the "PyConfig". If configuration fields which are in
   common with "PyPreConfig" are tuned, they must be set before
   calling a "PyConfig" method:

   * "PyConfig.dev_mode"

   * "PyConfig.isolated"

   * "PyConfig.parse_argv"

   * "PyConfig.use_environment"

   Moreover, if "PyConfig_SetArgv()" or "PyConfig_SetBytesArgv()" is
   used, this method must be called before other methods, since the
   preinitialization configuration depends on command line arguments
   (if "parse_argv" is non-zero).

   이 메서드의 호출자는 "PyStatus_Exception()"과
   "Py_ExitStatusException()" 을 사용하여 예외(에러나 종료)를 처리해야
   합니다.

   구조체 필드:

   PyWideStringList argv

      Set "sys.argv" command line arguments based on "argv".  These
      parameters are similar to those passed to the program's "main()"
      function with the difference that the first entry should refer
      to the script file to be executed rather than the executable
      hosting the Python interpreter.  If there isn't a script that
      will be run, the first entry in "argv" can be an empty string.

      Set "parse_argv" to "1" to parse "argv" the same way the regular
      Python parses Python command line arguments and then to strip
      Python arguments from "argv".

      If "argv" is empty, an empty string is added to ensure that
      "sys.argv" always exists and is never empty.

      Default: "NULL".

      See also the "orig_argv" member.

   int safe_path

      If equals to zero, "Py_RunMain()" prepends a potentially unsafe
      path to "sys.path" at startup:

      * If "argv[0]" is equal to "L"-m"" ("python -m module"), prepend
        the current working directory.

      * If running a script ("python script.py"), prepend the script's
        directory.  If it's a symbolic link, resolve symbolic links.

      * Otherwise ("python -c code" and "python"), prepend an empty
        string, which means the current working directory.

      Set to "1" by the "-P" command line option and the
      "PYTHONSAFEPATH" environment variable.

      Default: "0" in Python config, "1" in isolated config.

      Added in version 3.11.

   wchar_t *base_exec_prefix

      "sys.base_exec_prefix".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.exec_prefix".

   wchar_t *base_executable

      Python base executable: "sys._base_executable".

      Set by the "__PYVENV_LAUNCHER__" environment variable.

      Set from "PyConfig.executable" if "NULL".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.executable".

   wchar_t *base_prefix

      "sys.base_prefix".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.prefix".

   int buffered_stdio

      If equals to "0" and "configure_c_stdio" is non-zero, disable
      buffering on the C streams stdout and stderr.

      Set to "0" by the "-u" command line option and the
      "PYTHONUNBUFFERED" environment variable.

      stdin은 항상 버퍼링 모드로 열립니다.

      Default: "1".

   int bytes_warning

      If equals to "1", issue a warning when comparing "bytes" or
      "bytearray" with "str", or comparing "bytes" with "int".

      If equal or greater to "2", raise a "BytesWarning" exception in
      these cases.

      Incremented by the "-b" command line option.

      Default: "0".

   int warn_default_encoding

      If non-zero, emit a "EncodingWarning" warning when
      "io.TextIOWrapper" uses its default encoding. See Opt-in
      EncodingWarning for details.

      Default: "0".

      Added in version 3.10.

   int code_debug_ranges

      If equals to "0", disables the inclusion of the end line and
      column mappings in code objects. Also disables traceback
      printing carets to specific error locations.

      Set to "0" by the "PYTHONNODEBUGRANGES" environment variable and
      by the "-X no_debug_ranges" command line option.

      Default: "1".

      Added in version 3.11.

   wchar_t *check_hash_pycs_mode

      Control the validation behavior of hash-based ".pyc" files:
      value of the "--check-hash-based-pycs" command line option.

      Valid values:

      * "L"always"": Hash the source file for invalidation regardless
        of value of the 'check_source' flag.

      * "L"never"": Assume that hash-based pycs always are valid.

      * "L"default"": The 'check_source' flag in hash-based pycs
        determines invalidation.

      Default: "L"default"".

      See also **PEP 552** "Deterministic pycs".

   int configure_c_stdio

      If non-zero, configure C standard streams:

      * On Windows, set the binary mode ("O_BINARY") on stdin, stdout
        and stderr.

      * If "buffered_stdio" equals zero, disable buffering of stdin,
        stdout and stderr streams.

      * If "interactive" is non-zero, enable stream buffering on stdin
        and stdout (only stdout on Windows).

      Default: "1" in Python config, "0" in isolated config.

   int dev_mode

      0이 아니면, 파이썬 개발 모드를 활성화합니다.

      Set to "1" by the "-X dev" option and the "PYTHONDEVMODE"
      environment variable.

      Default: "-1" in Python mode, "0" in isolated mode.

   int dump_refs

      Dump Python references?

      0이 아니면, 종료 시 여전히 활성 상태인 모든 객체를 덤프합니다.

      Set to "1" by the "PYTHONDUMPREFS" environment variable.

      Needs a special build of Python with the "Py_TRACE_REFS" macro
      defined: see the "configure --with-trace-refs option".

      Default: "0".

   wchar_t *dump_refs_file

      Filename where to dump Python references.

      Set by the "PYTHONDUMPREFSFILE" environment variable.

      Default: "NULL".

      Added in version 3.11.

   wchar_t *exec_prefix

      The site-specific directory prefix where the platform-dependent
      Python files are installed: "sys.exec_prefix".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.base_exec_prefix".

   wchar_t *executable

      The absolute path of the executable binary for the Python
      interpreter: "sys.executable".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.base_executable".

   int faulthandler

      Enable faulthandler?

      0이 아니면, 시작 시 "faulthandler.enable()"을 호출합니다.

      Set to "1" by "-X faulthandler" and the "PYTHONFAULTHANDLER"
      environment variable.

      Default: "-1" in Python mode, "0" in isolated mode.

   wchar_t *filesystem_encoding

      *Filesystem encoding*: "sys.getfilesystemencoding()".

      On macOS, Android and VxWorks: use ""utf-8"" by default.

      On Windows: use ""utf-8"" by default, or ""mbcs"" if
      "legacy_windows_fs_encoding" of "PyPreConfig" is non-zero.

      Default encoding on other platforms:

      * ""utf-8"" if "PyPreConfig.utf8_mode" is non-zero.

      * ""ascii"" if Python detects that "nl_langinfo(CODESET)"
        announces the ASCII encoding, whereas the "mbstowcs()"
        function decodes from a different encoding (usually Latin1).

      * ""utf-8"" if "nl_langinfo(CODESET)" returns an empty string.

      * Otherwise, use the *locale encoding*: "nl_langinfo(CODESET)"
        result.

      At Python startup, the encoding name is normalized to the Python
      codec name. For example, ""ANSI_X3.4-1968"" is replaced with
      ""ascii"".

      See also the "filesystem_errors" member.

   wchar_t *filesystem_errors

      *Filesystem error handler*: "sys.getfilesystemencodeerrors()".

      On Windows: use ""surrogatepass"" by default, or ""replace""  if
      "legacy_windows_fs_encoding" of "PyPreConfig" is non-zero.

      On other platforms: use ""surrogateescape"" by default.

      Supported error handlers:

      * ""strict""

      * ""surrogateescape""

      * ""surrogatepass"" (only supported with the UTF-8 encoding)

      See also the "filesystem_encoding" member.

   int use_frozen_modules

      If non-zero, use frozen modules.

      Set by the "PYTHON_FROZEN_MODULES" environment variable.

      Default: "1" in a release build, or "0" in a debug build.

   unsigned long hash_seed

   int use_hash_seed

      무작위 해시 함수 시드.

      If "use_hash_seed" is zero, a seed is chosen randomly at Python
      startup, and "hash_seed" is ignored.

      Set by the "PYTHONHASHSEED" environment variable.

      Default *use_hash_seed* value: "-1" in Python mode, "0" in
      isolated mode.

   wchar_t *home

      Set the default Python "home" directory, that is, the location
      of the standard Python libraries (see "PYTHONHOME").

      Set by the "PYTHONHOME" environment variable.

      Default: "NULL".

      Part of the Python Path Configuration input.

   int import_time

         If "1", profile import time. If "2", include additional
         output that indicates when an imported module has already
         been loaded.

         Set by the "-X importtime" option and the
         "PYTHONPROFILEIMPORTTIME" environment variable.

         Default: "0".

      버전 3.14에서 변경: Added support for "import_time = 2"

   int inspect

      스크립트나 명령을 실행한 후 대화식 모드로 들어갑니다.

      If greater than "0", enable inspect: when a script is passed as
      first argument or the -c option is used, enter interactive mode
      after executing the script or the command, even when "sys.stdin"
      does not appear to be a terminal.

      Incremented by the "-i" command line option. Set to "1" if the
      "PYTHONINSPECT" environment variable is non-empty.

      Default: "0".

   int install_signal_handlers

      Install Python signal handlers?

      Default: "1" in Python mode, "0" in isolated mode.

   int interactive

      If greater than "0", enable the interactive mode (REPL).

      Incremented by the "-i" command line option.

      Default: "0".

   int int_max_str_digits

      Configures the integer string conversion length limitation.  An
      initial value of "-1" means the value will be taken from the
      command line or environment or otherwise default to 4300
      ("sys.int_info.default_max_str_digits").  A value of "0"
      disables the limitation.  Values greater than zero but less than
      640 ("sys.int_info.str_digits_check_threshold") are unsupported
      and will produce an error.

      Configured by the "-X int_max_str_digits" command line flag or
      the "PYTHONINTMAXSTRDIGITS" environment variable.

      Default: "-1" in Python mode.  4300
      ("sys.int_info.default_max_str_digits") in isolated mode.

      Added in version 3.12.

   int cpu_count

      If the value of "cpu_count" is not "-1" then it will override
      the return values of "os.cpu_count()", "os.process_cpu_count()",
      and "multiprocessing.cpu_count()".

      Configured by the "-X cpu_count=*n|default*" command line flag
      or the "PYTHON_CPU_COUNT" environment variable.

      Default: "-1".

      Added in version 3.13.

   int isolated

      If greater than "0", enable isolated mode:

      * Set "safe_path" to "1": don't prepend a potentially unsafe
        path to "sys.path" at Python startup, such as the current
        directory, the script's directory or an empty string.

      * Set "use_environment" to "0": ignore "PYTHON" environment
        variables.

      * Set "user_site_directory" to "0": don't add the user site
        directory to "sys.path".

      * 파이썬 REPL은 대화식 프롬프트에서 "readline"을 임포트 하지도
        기본 readline 구성을 활성화하지도 않습니다.

      Set to "1" by the "-I" command line option.

      Default: "0" in Python mode, "1" in isolated mode.

      See also the Isolated Configuration and "PyPreConfig.isolated".

   int legacy_windows_stdio

      If non-zero, use "io.FileIO" instead of "io._WindowsConsoleIO"
      for "sys.stdin", "sys.stdout" and "sys.stderr".

      Set to "1" if the "PYTHONLEGACYWINDOWSSTDIO" environment
      variable is set to a non-empty string.

      윈도우에서만 사용 가능합니다. "#ifdef MS_WINDOWS" 매크로는 윈도
      우 특정 코드에 사용할 수 있습니다.

      Default: "0".

      See also the **PEP 528** (Change Windows console encoding to
      UTF-8).

   int malloc_stats

      0이 아니면, 종료 시 파이썬 pymalloc 메모리 할당자에 대한 통계를
      덤프합니다.

      Set to "1" by the "PYTHONMALLOCSTATS" environment variable.

      The option is ignored if Python is "configured using the
      --without-pymalloc option".

      Default: "0".

   wchar_t *platlibdir

      Platform library directory name: "sys.platlibdir".

      Set by the "PYTHONPLATLIBDIR" environment variable.

      Default: value of the "PLATLIBDIR" macro which is set by the
      "configure --with-platlibdir option" (default: ""lib"", or
      ""DLLs"" on Windows).

      Part of the Python Path Configuration input.

      Added in version 3.9.

      버전 3.11에서 변경: This macro is now used on Windows to locate
      the standard library extension modules, typically under "DLLs".
      However, for compatibility, note that this value is ignored for
      any non-standard layouts, including in-tree builds and virtual
      environments.

   wchar_t *pythonpath_env

      Module search paths ("sys.path") as a string separated by
      "DELIM" ("os.pathsep").

      Set by the "PYTHONPATH" environment variable.

      Default: "NULL".

      Part of the Python Path Configuration input.

   PyWideStringList module_search_paths

   int module_search_paths_set

      Module search paths: "sys.path".

      If "module_search_paths_set" is equal to "0",
      "Py_InitializeFromConfig()" will replace "module_search_paths"
      and sets "module_search_paths_set" to "1".

      Default: empty list ("module_search_paths") and "0"
      ("module_search_paths_set").

      Part of the Python Path Configuration output.

   int optimization_level

      컴파일 최적화 수준:

      * "0": Peephole optimizer, set "__debug__" to "True".

      * "1": Level 0, remove assertions, set "__debug__" to "False".

      * "2": Level 1, strip docstrings.

      Incremented by the "-O" command line option. Set to the
      "PYTHONOPTIMIZE" environment variable value.

      Default: "0".

   PyWideStringList orig_argv

      The list of the original command line arguments passed to the
      Python executable: "sys.orig_argv".

      If "orig_argv" list is empty and "argv" is not a list only
      containing an empty string, "PyConfig_Read()" copies "argv" into
      "orig_argv" before modifying "argv" (if "parse_argv" is non-
      zero).

      See also the "argv" member and the "Py_GetArgcArgv()" function.

      Default: empty list.

      Added in version 3.10.

   int parse_argv

      Parse command line arguments?

      If equals to "1", parse "argv" the same way the regular Python
      parses command line arguments, and strip Python arguments from
      "argv".

      The "PyConfig_Read()" function only parses "PyConfig.argv"
      arguments once: "PyConfig.parse_argv" is set to "2" after
      arguments are parsed. Since Python arguments are stripped from
      "PyConfig.argv", parsing arguments twice would parse the
      application options as Python options.

      Default: "1" in Python mode, "0" in isolated mode.

      버전 3.10에서 변경: The "PyConfig.argv" arguments are now only
      parsed if "PyConfig.parse_argv" equals to "1".

   int parser_debug

      Parser debug mode. If greater than "0", turn on parser debugging
      output (for expert only, depending on compilation options).

      Incremented by the "-d" command line option. Set to the
      "PYTHONDEBUG" environment variable value.

      Needs a debug build of Python (the "Py_DEBUG" macro must be
      defined).

      Default: "0".

   int pathconfig_warnings

      If non-zero, calculation of path configuration is allowed to log
      warnings into "stderr". If equals to "0", suppress these
      warnings.

      Default: "1" in Python mode, "0" in isolated mode.

      Part of the Python Path Configuration input.

      버전 3.11에서 변경: Now also applies on Windows.

   wchar_t *prefix

      The site-specific directory prefix where the platform
      independent Python files are installed: "sys.prefix".

      Default: "NULL".

      Part of the Python Path Configuration output.

      See also "PyConfig.base_prefix".

   wchar_t *program_name

      Program name used to initialize "executable" and in early error
      messages during Python initialization.

      * On macOS, use "PYTHONEXECUTABLE" environment variable if set.

      * If the "WITH_NEXT_FRAMEWORK" macro is defined, use
        "__PYVENV_LAUNCHER__" environment variable if set.

      * Use "argv[0]" of "argv" if available and non-empty.

      * Otherwise, use "L"python"" on Windows, or "L"python3"" on
        other platforms.

      Default: "NULL".

      Part of the Python Path Configuration input.

   wchar_t *pycache_prefix

      Directory where cached ".pyc" files are written:
      "sys.pycache_prefix".

      Set by the "-X pycache_prefix=PATH" command line option and the
      "PYTHONPYCACHEPREFIX" environment variable. The command-line
      option takes precedence.

      "NULL"이면, "sys.pycache_prefix"는 "None"으로 설정됩니다.

      Default: "NULL".

   int quiet

      Quiet mode. If greater than "0", don't display the copyright and
      version at Python startup in interactive mode.

      Incremented by the "-q" command line option.

      Default: "0".

   wchar_t *run_command

      Value of the "-c" command line option.

      Used by "Py_RunMain()".

      Default: "NULL".

   wchar_t *run_filename

      Filename passed on the command line: trailing command line
      argument without "-c" or "-m". It is used by the "Py_RunMain()"
      function.

      For example, it is set to "script.py" by the "python3 script.py
      arg" command line.

      See also the "PyConfig.skip_source_first_line" option.

      Default: "NULL".

   wchar_t *run_module

      Value of the "-m" command line option.

      Used by "Py_RunMain()".

      Default: "NULL".

   wchar_t *run_presite

      "package.module" path to module that should be imported before
      "site.py" is run.

      Set by the "-X presite=package.module" command-line option and
      the "PYTHON_PRESITE" environment variable. The command-line
      option takes precedence.

      Needs a debug build of Python (the "Py_DEBUG" macro must be
      defined).

      Default: "NULL".

   int show_ref_count

      Show total reference count at exit (excluding *immortal*
      objects)?

      Set to "1" by "-X showrefcount" command line option.

      Needs a debug build of Python (the "Py_REF_DEBUG" macro must be
      defined).

      Default: "0".

   int site_import

      시작할 때 "site" 모듈을 임포트 합니까?

      If equal to zero, disable the import of the module site and the
      site-dependent manipulations of "sys.path" that it entails.

      Also disable these manipulations if the "site" module is
      explicitly imported later (call "site.main()" if you want them
      to be triggered).

      Set to "0" by the "-S" command line option.

      "sys.flags.no_site" is set to the inverted value of
      "site_import".

      Default: "1".

   int skip_source_first_line

      If non-zero, skip the first line of the "PyConfig.run_filename"
      source.

      It allows the usage of non-Unix forms of "#!cmd". This is
      intended for a DOS specific hack only.

      Set to "1" by the "-x" command line option.

      Default: "0".

   wchar_t *stdio_encoding

   wchar_t *stdio_errors

      Encoding and encoding errors of "sys.stdin", "sys.stdout" and
      "sys.stderr" (but "sys.stderr" always uses ""backslashreplace""
      error handler).

      Use the "PYTHONIOENCODING" environment variable if it is non-
      empty.

      Default encoding:

      * ""UTF-8"" if "PyPreConfig.utf8_mode" is non-zero.

      * Otherwise, use the *locale encoding*.

      Default error handler:

      * On Windows: use ""surrogateescape"".

      * ""surrogateescape"" if "PyPreConfig.utf8_mode" is non-zero, or
        if the LC_CTYPE locale is "C" or "POSIX".

      * ""strict"" otherwise.

      See also "PyConfig.legacy_windows_stdio".

   int tracemalloc

      Enable tracemalloc?

      0이 아니면, 시작 시 "tracemalloc.start()"를 호출합니다.

      Set by "-X tracemalloc=N" command line option and by the
      "PYTHONTRACEMALLOC" environment variable.

      Default: "-1" in Python mode, "0" in isolated mode.

   int perf_profiling

      Enable the Linux "perf" profiler support?

      If equals to "1", enable support for the Linux "perf" profiler.

      If equals to "2", enable support for the Linux "perf" profiler
      with DWARF JIT support.

      Set to "1" by "-X perf" command-line option and the
      "PYTHONPERFSUPPORT" environment variable.

      Set to "2" by the "-X perf_jit" command-line option and the
      "PYTHON_PERF_JIT_SUPPORT" environment variable.

      Default: "-1".

      더 보기:

        See Python support for the Linux perf profiler for more
        information.

      Added in version 3.12.

   wchar_t *stdlib_dir

      Directory of the Python standard library.

      Default: "NULL".

      Added in version 3.11.

   int use_environment

      Use environment variables?

      If equals to zero, ignore the environment variables.

      Set to "0" by the "-E" environment variable.

      Default: "1" in Python config and "0" in isolated config.

   int use_system_logger

      If non-zero, "stdout" and "stderr" will be redirected to the
      system log.

      Only available on macOS 10.12 and later, and on iOS.

      Default: "0" (don't use the system log) on macOS; "1" on iOS
      (use the system log).

      Added in version 3.14.

   int user_site_directory

      If non-zero, add the user site directory to "sys.path".

      Set to "0" by the "-s" and "-I" command line options.

      Set to "0" by the "PYTHONNOUSERSITE" environment variable.

      Default: "1" in Python mode, "0" in isolated mode.

   int verbose

      Verbose mode. If greater than "0", print a message each time a
      module is imported, showing the place (filename or built-in
      module) from which it is loaded.

      If greater than or equal to "2", print a message for each file
      that is checked for when searching for a module. Also provides
      information on module cleanup at exit.

      Incremented by the "-v" command line option.

      Set by the "PYTHONVERBOSE" environment variable value.

      Default: "0".

   PyWideStringList warnoptions

      Options of the "warnings" module to build warnings filters,
      lowest to highest priority: "sys.warnoptions".

      "warnings" 모듈은 "sys.warnoptions"를 역순으로 추가합니다: 마지
      막 "PyConfig.warnoptions" 항목은 가장 먼저 검사되는
      "warnings.filters"의 첫 번째 항목이 됩니다 (가장 높은 우선순위).

      The "-W" command line options adds its value to "warnoptions",
      it can be used multiple times.

      The "PYTHONWARNINGS" environment variable can also be used to
      add warning options. Multiple options can be specified,
      separated by commas (",").

      Default: empty list.

   int write_bytecode

      If equal to "0", Python won't try to write ".pyc" files on the
      import of source modules.

      Set to "0" by the "-B" command line option and the
      "PYTHONDONTWRITEBYTECODE" environment variable.

      "sys.dont_write_bytecode"는 "write_bytecode"의 반전된 값으로 초
      기화됩니다.

      Default: "1".

   PyWideStringList xoptions

      Values of the "-X" command line options: "sys._xoptions".

      Default: empty list.

   int _pystats

      If non-zero, write performance statistics at Python exit.

      Need a special build with the "Py_STATS" macro: see "--enable-
      pystats".

      Default: "0".

If "parse_argv" is non-zero, "argv" arguments are parsed the same way
the regular Python parses command line arguments, and Python arguments
are stripped from "argv".

The "xoptions" options are parsed to set other options: see the "-X"
command line option.

버전 3.9에서 변경: "show_alloc_count" 필드가 제거되었습니다.


PyConfig를 사용한 초기화
------------------------

Initializing the interpreter from a populated configuration struct is
handled by calling "Py_InitializeFromConfig()".

호출자는 "PyStatus_Exception()"과 "Py_ExitStatusException()" 을 사용하
여 예외(에러나 종료)를 처리해야 합니다.

If "PyImport_FrozenModules()", "PyImport_AppendInittab()" or
"PyImport_ExtendInittab()" are used, they must be set or called after
Python preinitialization and before the Python initialization. If
Python is initialized multiple times, "PyImport_AppendInittab()" or
"PyImport_ExtendInittab()" must be called before each Python
initialization.

The current configuration ("PyConfig" type) is stored in
"PyInterpreterState.config".

프로그램 이름을 설정하는 예:

   void init_python(void)
   {
       PyStatus status;

       PyConfig config;
       PyConfig_InitPythonConfig(&config);

       /* Set the program name. Implicitly preinitialize Python. */
       status = PyConfig_SetString(&config, &config.program_name,
                                   L"/path/to/my_program");
       if (PyStatus_Exception(status)) {
           goto exception;
       }

       status = Py_InitializeFromConfig(&config);
       if (PyStatus_Exception(status)) {
           goto exception;
       }
       PyConfig_Clear(&config);
       return;

   exception:
       PyConfig_Clear(&config);
       Py_ExitStatusException(status);
   }

More complete example modifying the default configuration, read the
configuration, and then override some parameters. Note that since
3.11, many parameters are not calculated until initialization, and so
values cannot be read from the configuration structure. Any values set
before initialize is called will be left unchanged by initialization:

   PyStatus init_python(const char *program_name)
   {
       PyStatus status;

       PyConfig config;
       PyConfig_InitPythonConfig(&config);

       /* Set the program name before reading the configuration
          (decode byte string from the locale encoding).

          Implicitly preinitialize Python. */
       status = PyConfig_SetBytesString(&config, &config.program_name,
                                        program_name);
       if (PyStatus_Exception(status)) {
           goto done;
       }

       /* Read all configuration at once */
       status = PyConfig_Read(&config);
       if (PyStatus_Exception(status)) {
           goto done;
       }

       /* Specify sys.path explicitly */
       /* If you want to modify the default set of paths, finish
          initialization first and then use PySys_GetObject("path") */
       config.module_search_paths_set = 1;
       status = PyWideStringList_Append(&config.module_search_paths,
                                        L"/path/to/stdlib");
       if (PyStatus_Exception(status)) {
           goto done;
       }
       status = PyWideStringList_Append(&config.module_search_paths,
                                        L"/path/to/more/modules");
       if (PyStatus_Exception(status)) {
           goto done;
       }

       /* Override executable computed by PyConfig_Read() */
       status = PyConfig_SetString(&config, &config.executable,
                                   L"/path/to/my_executable");
       if (PyStatus_Exception(status)) {
           goto done;
       }

       status = Py_InitializeFromConfig(&config);

   done:
       PyConfig_Clear(&config);
       return status;
   }


격리된 구성
-----------

"PyPreConfig_InitIsolatedConfig()"와 "PyConfig_InitIsolatedConfig()"
함수는 시스템에서 파이썬을 격리하는 구성을 만듭니다. 예를 들어, 파이썬
을 응용 프로그램에 내장하기 위해.

This configuration ignores global configuration variables, environment
variables, command line arguments ("PyConfig.argv" is not parsed) and
user site directory. The C standard streams (ex: "stdout") and the
LC_CTYPE locale are left unchanged. Signal handlers are not installed.

Configuration files are still used with this configuration to
determine paths that are unspecified. Ensure "PyConfig.home" is
specified to avoid computing the default path configuration.


파이썬 구성
-----------

"PyPreConfig_InitPythonConfig()"와 "PyConfig_InitPythonConfig()" 함수
는 일반 파이썬처럼 동작하는 사용자 정의된 파이썬을 빌드하기 위한 구성
을 만듭니다.

환경 변수와 명령 줄 인자는 파이썬을 구성하는 데 사용되는 반면, 전역 구
성 변수는 무시됩니다.

This function enables C locale coercion (**PEP 538**) and Python UTF-8
Mode (**PEP 540**) depending on the LC_CTYPE locale, "PYTHONUTF8" and
"PYTHONCOERCECLOCALE" environment variables.


Python Path Configuration
-------------------------

"PyConfig"에는 경로 구성을 위한 여러 필드가 포함되어 있습니다:

* 경로 구성 입력:

  * "PyConfig.home"

  * "PyConfig.platlibdir"

  * "PyConfig.pathconfig_warnings"

  * "PyConfig.program_name"

  * "PyConfig.pythonpath_env"

  * 현재 작업 디렉터리: 절대 경로를 얻기 위해

  * ("PyConfig.program_name"에서) 프로그램 전체 경로를 얻기 위한
    "PATH" 환경 변수

  * "__PYVENV_LAUNCHER__" 환경 변수

  * (윈도우 전용) HKEY_CURRENT_USER와 HKEY_LOCAL_MACHINE의
    "SoftwarePythonPythonCoreX.YPythonPath" 아래에 있는 레지스트리의
    응용 프로그램 경로 (여기서 X.Y는 파이썬 버전입니다).

* 경로 구성 출력 필드:

  * "PyConfig.base_exec_prefix"

  * "PyConfig.base_executable"

  * "PyConfig.base_prefix"

  * "PyConfig.exec_prefix"

  * "PyConfig.executable"

  * "PyConfig.module_search_paths_set", "PyConfig.module_search_paths"

  * "PyConfig.prefix"

If at least one "output field" is not set, Python calculates the path
configuration to fill unset fields. If "module_search_paths_set" is
equal to "0", "module_search_paths" is overridden and
"module_search_paths_set" is set to "1".

It is possible to completely ignore the function calculating the
default path configuration by setting explicitly all path
configuration output fields listed above. A string is considered as
set even if it is non-empty. "module_search_paths" is considered as
set if "module_search_paths_set" is set to "1". In this case,
"module_search_paths" will be used without modification.

Set "pathconfig_warnings" to "0" to suppress warnings when calculating
the path configuration (Unix only, Windows does not log any warning).

"base_prefix"나 "base_exec_prefix" 필드가 설정되지 않으면, 각각
"prefix"와 "exec_prefix"의 값을 상속합니다.

"Py_RunMain()"과 "Py_Main()"은 "sys.path"를 수정합니다:

* "run_filename"이 설정되고 "__main__.py" 스크립트를 포함하는 디렉터리
  이면, "run_filename"을 "sys.path" 앞에 추가합니다.

* "isolated"가 0이면:

  * "run_module"이 설정되면, 현재 디렉터리를 "sys.path" 앞에 추가합니
    다. 현재 디렉터리를 읽을 수 없으면 아무것도 하지 않습니다.

  * "run_filename"이 설정되면, 파일명의 디렉터리를 "sys.path" 앞에 추
    가합니다.

  * 그렇지 않으면, 빈 문자열을 "sys.path" 앞에 추가합니다.

"site_import"가 0이 아니면, "site" 모듈이 "sys.path"를 수정할 수 있습
니다. "user_site_directory"가 0이 아니고 사용자의 site-package 디렉터
리가 존재하면, "site" 모듈은 사용자의 site-package 디렉터리를
"sys.path"에 추가합니다.

다음과 같은 구성 파일이 경로 구성에 사용됩니다:

* "pyvenv.cfg"

* "._pth" file (ex: "python._pth")

* "pybuilddir.txt" (유닉스 전용)

If a "._pth" file is present:

* Set "isolated" to "1".

* Set "use_environment" to "0".

* Set "site_import" to "0".

* Set "safe_path" to "1".

If "home" is not set and a "pyvenv.cfg" file is present in the same
directory as "executable", or its parent, "prefix" and "exec_prefix"
are set that location. When this happens, "base_prefix" and
"base_exec_prefix" still keep their value, pointing to the base
installation. See Virtual Environments for more information.

The "__PYVENV_LAUNCHER__" environment variable is used to set
"PyConfig.base_executable".

버전 3.14에서 변경: "prefix", and "exec_prefix", are now set to the
"pyvenv.cfg" directory. This was previously done by "site", therefore
affected by "-S".


Py_GetArgcArgv()
================

void Py_GetArgcArgv(int *argc, wchar_t ***argv)

   파이썬이 수정하기 전의, 원래 명령 줄 인자를 가져옵니다.

   See also "PyConfig.orig_argv" member.


Delaying main module execution
==============================

In some embedding use cases, it may be desirable to separate
interpreter initialization from the execution of the main module.

This separation can be achieved by setting "PyConfig.run_command" to
the empty string during initialization (to prevent the interpreter
from dropping into the interactive prompt), and then subsequently
executing the desired main module code using "__main__.__dict__" as
the global namespace.
