객체 프로토콜

PyObject *Py_GetConstant(unsigned int constant_id)

Part of the Stable ABI since version 3.13.

Get a strong reference to a constant.

Set an exception and return NULL if constant_id is invalid.

constant_id must be one of these constant identifiers:

Constant Identifier	Value	Returned object
Py_CONSTANT_NONE	0	None
Py_CONSTANT_FALSE	1	False
Py_CONSTANT_TRUE	2	True
Py_CONSTANT_ELLIPSIS	3	Ellipsis
Py_CONSTANT_NOT_IMPLEMENTED	4	NotImplemented
Py_CONSTANT_ZERO	5	0
Py_CONSTANT_ONE	6	1
Py_CONSTANT_EMPTY_STR	7	''
Py_CONSTANT_EMPTY_BYTES	8	b''
Py_CONSTANT_EMPTY_TUPLE	9	()

Numeric values are only given for projects which cannot use the constant identifiers.

Added in version 3.13.

CPython 구현 상세: In CPython, all of these constants are immortal.

PyObject *Py_GetConstantBorrowed(unsigned int constant_id)

Part of the Stable ABI since version 3.13.

Similar to Py_GetConstant(), but return a borrowed reference.

This function is primarily intended for backwards compatibility: using Py_GetConstant() is recommended for new code.

The reference is borrowed from the interpreter, and is valid until the interpreter finalization.

Added in version 3.13.

PyObject *Py_NotImplemented

지정된 형 조합에 대해 연산이 구현되지 않았음을 알리는 데 사용되는 NotImplemented 싱글톤.

Py_RETURN_NOTIMPLEMENTED

Properly handle returning Py_NotImplemented from within a C function (that is, create a new strong reference to NotImplemented and return it).

Py_PRINT_RAW

Flag to be used with multiple functions that print the object (like PyObject_Print() and PyFile_WriteObject()). If passed, these function would use the str() of the object instead of the repr().

int PyObject_Print(PyObject *o, FILE *fp, int flags)

Print an object o, on file fp. Returns -1 on error. The flags argument is used to enable certain printing options. The only option currently supported is Py_PRINT_RAW; if given, the str() of the object is written instead of the repr().

int PyObject_HasAttrWithError(PyObject *o, PyObject *attr_name)

Part of the Stable ABI since version 3.13.

Returns 1 if o has the attribute attr_name, and 0 otherwise. This is equivalent to the Python expression hasattr(o, attr_name). On failure, return -1.

Added in version 3.13.

int PyObject_HasAttrStringWithError(PyObject *o, const char *attr_name)

Part of the Stable ABI since version 3.13.

This is the same as PyObject_HasAttrWithError(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

int PyObject_HasAttr(PyObject *o, PyObject *attr_name)

Part of the Stable ABI.

Returns 1 if o has the attribute attr_name, and 0 otherwise. This function always succeeds.

참고

Exceptions that occur when this calls __getattr__() and __getattribute__() methods are silently ignored. For proper error handling, use PyObject_HasAttrWithError(), PyObject_GetOptionalAttr() or PyObject_GetAttr() instead.

int PyObject_HasAttrString(PyObject *o, const char *attr_name)

Part of the Stable ABI.

This is the same as PyObject_HasAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

참고

Exceptions that occur when this calls __getattr__() and __getattribute__() methods or while creating the temporary str object are silently ignored. For proper error handling, use PyObject_HasAttrStringWithError(), PyObject_GetOptionalAttrString() or PyObject_GetAttrString() instead.

PyObject *PyObject_GetAttr(PyObject *o, PyObject *attr_name)

Return value: New reference. Part of the Stable ABI.

객체 o에서 attr_name이라는 이름의 어트리뷰트를 가져옵니다. 성공하면 어트리뷰트 값을, 실패하면 NULL을 반환합니다. 이것은 파이썬 표현식 o.attr_name과 동등합니다.

If the missing attribute should not be treated as a failure, you can use PyObject_GetOptionalAttr() instead.

PyObject *PyObject_GetAttrString(PyObject *o, const char *attr_name)

Return value: New reference. Part of the Stable ABI.

This is the same as PyObject_GetAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

If the missing attribute should not be treated as a failure, you can use PyObject_GetOptionalAttrString() instead.

int PyObject_GetOptionalAttr(PyObject *obj, PyObject *attr_name, PyObject **result);

Part of the Stable ABI since version 3.13.

Variant of PyObject_GetAttr() which doesn’t raise AttributeError if the attribute is not found.

If the attribute is found, return 1 and set *result to a new strong reference to the attribute. If the attribute is not found, return 0 and set *result to NULL; the AttributeError is silenced. If an error other than AttributeError is raised, return -1 and set *result to NULL.

Added in version 3.13.

int PyObject_GetOptionalAttrString(PyObject *obj, const char *attr_name, PyObject **result);

Part of the Stable ABI since version 3.13.

This is the same as PyObject_GetOptionalAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

Added in version 3.13.

PyObject *PyObject_GenericGetAttr(PyObject *o, PyObject *name)

Return value: New reference. Part of the Stable ABI.

형 객체의 tp_getattro 슬롯에 배치되는 일반 어트리뷰트 게터(getter) 함수. 객체의 (있다면) __dict__에 있는 어트리뷰트뿐만 아니라 객체의 MRO에 있는 클래스의 딕셔너리에 있는 디스크립터를 찾습니다. 디스크립터 구현하기에 요약된 것처럼, 데이터 디스크립터는 인스턴스 어트리뷰트보다 우선하지만, 비 데이터 디스크립터는 그렇지 않습니다. 그렇지 않으면, AttributeError가 발생합니다.

int PyObject_SetAttr(PyObject *o, PyObject *attr_name, PyObject *v)

Part of the Stable ABI.

객체 o에 대해, attr_name이라는 이름의 어트리뷰트 값을 v 값으로 설정합니다. 실패 시 예외를 발생시키고 -1을 반환합니다. 성공하면 0을 반환합니다. 이것은 파이썬 문장 o.attr_name = v와 동등합니다.

If v is NULL, the attribute is deleted. This behaviour is deprecated in favour of using PyObject_DelAttr(), but there are currently no plans to remove it.

int PyObject_SetAttrString(PyObject *o, const char *attr_name, PyObject *v)

Part of the Stable ABI.

This is the same as PyObject_SetAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

If v is NULL, the attribute is deleted, but this feature is deprecated in favour of using PyObject_DelAttrString().

The number of different attribute names passed to this function should be kept small, usually by using a statically allocated string as attr_name. For attribute names that aren’t known at compile time, prefer calling PyUnicode_FromString() and PyObject_SetAttr() directly. For more details, see PyUnicode_InternFromString(), which may be used internally to create a key object.

int PyObject_GenericSetAttr(PyObject *o, PyObject *name, PyObject *value)

Part of the Stable ABI.

형 객체의 tp_setattro 슬롯에 배치되는 일반 어트리뷰트 세터(setter)와 딜리터(deleter) 함수. 객체의 MRO에 있는 클래스의 딕셔너리에서 데이터 디스크립터를 찾고, 발견되면 인스턴스 딕셔너리에 있는 어트리뷰트를 설정하거나 삭제하는 것보다 우선합니다. 그렇지 않으면, 객체의 (있다면) __dict__에서 어트리뷰트가 설정되거나 삭제됩니다. 성공하면 0이 반환되고, 그렇지 않으면 AttributeError가 발생하고 -1이 반환됩니다.

int PyObject_DelAttr(PyObject *o, PyObject *attr_name)

Part of the Stable ABI since version 3.13.

객체 o에 대해, attr_name이라는 이름의 어트리뷰트를 삭제합니다. 실패 시 -1을 반환합니다. 이것은 파이썬 문장 del o.attr_name과 동등합니다.

int PyObject_DelAttrString(PyObject *o, const char *attr_name)

Part of the Stable ABI since version 3.13.

This is the same as PyObject_DelAttr(), but attr_name is specified as a const char* UTF-8 encoded bytes string, rather than a PyObject*.

The number of different attribute names passed to this function should be kept small, usually by using a statically allocated string as attr_name. For attribute names that aren’t known at compile time, prefer calling PyUnicode_FromString() and PyObject_DelAttr() directly. For more details, see PyUnicode_InternFromString(), which may be used internally to create a key object for lookup.

PyObject *PyObject_GenericGetDict(PyObject *o, void *context)

Return value: New reference. Part of the Stable ABI since version 3.10.

__dict__ 디스크립터의 게터(getter)를 위한 일반적인 구현. 필요하면 딕셔너리를 만듭니다.

This function may also be called to get the __dict__ of the object o. Pass NULL for context when calling it. Since this function may need to allocate memory for the dictionary, it may be more efficient to call PyObject_GetAttr() when accessing an attribute on the object.

On failure, returns NULL with an exception set.

Added in version 3.3.

int PyObject_GenericSetDict(PyObject *o, PyObject *value, void *context)

Part of the Stable ABI since version 3.7.

__dict__ 디스크립터의 세터(setter)를 위한 일반적인 구현. 이 구현은 딕셔너리 삭제를 허락하지 않습니다.

Added in version 3.3.

PyObject **_PyObject_GetDictPtr(PyObject *obj)

Return a pointer to __dict__ of the object obj. If there is no __dict__, return NULL without setting an exception.

This function may need to allocate memory for the dictionary, so it may be more efficient to call PyObject_GetAttr() when accessing an attribute on the object.

PyObject *PyObject_RichCompare(PyObject *o1, PyObject *o2, int opid)

Return value: New reference. Part of the Stable ABI.

Compare the values of o1 and o2 using the operation specified by opid, which must be one of Py_LT, Py_LE, Py_EQ, Py_NE, Py_GT, or Py_GE, corresponding to <, <=, ==, !=, >, or >= respectively. This is the equivalent of the Python expression o1 op o2, where op is the operator corresponding to opid. Returns the value of the comparison on success, or NULL on failure.

int PyObject_RichCompareBool(PyObject *o1, PyObject *o2, int opid)

Part of the Stable ABI.

Compare the values of o1 and o2 using the operation specified by opid, like PyObject_RichCompare(), but returns -1 on error, 0 if the result is false, 1 otherwise.

참고

If o1 and o2 are the same object, PyObject_RichCompareBool() will always return 1 for Py_EQ and 0 for Py_NE.

PyObject *PyObject_Format(PyObject *obj, PyObject *format_spec)

Part of the Stable ABI.

Format obj using format_spec. This is equivalent to the Python expression format(obj, format_spec).

format_spec may be NULL. In this case the call is equivalent to format(obj). Returns the formatted string on success, NULL on failure.

PyObject *PyObject_Repr(PyObject *o)

Return value: New reference. Part of the Stable ABI.

객체 o의 문자열 표현을 계산합니다. 성공하면 문자열 표현을, 실패하면 NULL을 반환합니다. 이것은 파이썬 표현식 repr(o)와 동등합니다. repr() 내장 함수에 의해 호출됩니다.

버전 3.4에서 변경: 이 함수에는 이제 디버그 어서션이 포함되어 있어 활성 예외를 조용히 버리지 않도록 합니다.

PyObject *PyObject_ASCII(PyObject *o)

Return value: New reference. Part of the Stable ABI.

PyObject_Repr()처럼, 객체 o의 문자열 표현을 계산하지만, \x, \u 또는 \U 이스케이프를 사용하여 PyObject_Repr()이 반환한 문자열에서 비 ASCII 문자를 이스케이프 합니다. 이것은 파이썬 2에서 PyObject_Repr()에 의해 반환된 것과 유사한 문자열을 생성합니다. ascii() 내장 함수에 의해 호출됩니다.

PyObject *PyObject_Str(PyObject *o)

Return value: New reference. Part of the Stable ABI.

객체 o의 문자열 표현을 계산합니다. 성공 시 문자열 표현을, 실패 시 NULL을 반환합니다. 이것은 파이썬 표현식 str(o)와 동등합니다. str() 내장 함수에 의해, 따라서 print() 함수에 의해서도 호출됩니다.

버전 3.4에서 변경: 이 함수에는 이제 디버그 어서션이 포함되어 있어 활성 예외를 조용히 버리지 않도록 합니다.

PyObject *PyObject_Bytes(PyObject *o)

Return value: New reference. Part of the Stable ABI.

객체 o의 바이트열 표현을 계산합니다. 실패하면 NULL을, 성공하면 바이트열 객체를 반환됩니다. 이는 o가 정수가 아닐 때 파이썬 표현식 bytes(o)와 동등합니다. bytes(o)와 달리, o가 정수이면 0으로 초기화된 바이트열 객체 대신 TypeError가 발생합니다.

int PyObject_IsSubclass(PyObject *derived, PyObject *cls)

Part of the Stable ABI.

클래스 derived가 클래스 cls와 동일하거나 cls에서 파생되었으면 1을 반환하고, 그렇지 않으면 0을 반환합니다. 에러가 발생하면 -1을 반환합니다.

cls가 튜플이면, cls의 모든 항목에 대해 검사가 수행됩니다. 적어도 하나의 검사에서 1을 반환하면 결과는 1이 되고, 그렇지 않으면 0이 됩니다.

If cls has a __subclasscheck__() method, it will be called to determine the subclass status as described in PEP 3119. Otherwise, derived is a subclass of cls if it is a direct or indirect subclass, i.e. contained in cls.__mro__.

Normally only class objects, i.e. instances of type or a derived class, are considered classes. However, objects can override this by having a __bases__ attribute (which must be a tuple of base classes).

int PyObject_IsInstance(PyObject *inst, PyObject *cls)

Part of the Stable ABI.

inst가 cls 클래스나 cls의 서브 클래스의 인스턴스이면 1을 반환하고, 그렇지 않으면 0을 반환합니다. 에러가 발생하면 -1을 반환하고 예외를 설정합니다.

cls가 튜플이면, cls의 모든 항목에 대해 검사가 수행됩니다. 적어도 하나의 검사에서 1을 반환하면 결과는 1이 되고, 그렇지 않으면 0이 됩니다.

If cls has a __instancecheck__() method, it will be called to determine the subclass status as described in PEP 3119. Otherwise, inst is an instance of cls if its class is a subclass of cls.

An instance inst can override what is considered its class by having a __class__ attribute.

An object cls can override if it is considered a class, and what its base classes are, by having a __bases__ attribute (which must be a tuple of base classes).

Py_hash_t PyObject_Hash(PyObject *o)

Part of the Stable ABI.

객체 o의 해시값을 계산하고 반환합니다. 실패하면 -1을 반환합니다. 이것은 파이썬 표현식 hash(o)와 동등합니다.

버전 3.2에서 변경: The return type is now Py_hash_t. This is a signed integer the same size as Py_ssize_t.

Py_hash_t PyObject_HashNotImplemented(PyObject *o)

Part of the Stable ABI.

Set a TypeError indicating that type(o) is not hashable and return -1. This function receives special treatment when stored in a tp_hash slot, allowing a type to explicitly indicate to the interpreter that it is not hashable.

int PyObject_IsTrue(PyObject *o)

Part of the Stable ABI.

객체 o를 참으로 간주하면 1을, 그렇지 않으면 0을 반환합니다. 이것은 파이썬 표현식 not not o와 동등합니다. 실패하면 -1을 반환합니다.

int PyObject_Not(PyObject *o)

Part of the Stable ABI.

객체 o를 참으로 간주하면 0을, 그렇지 않으면 1을 반환합니다. 이것은 파이썬 표현식 not o와 동등합니다. 실패하면 -1을 반환합니다.

PyObject *PyObject_Type(PyObject *o)

Return value: New reference. Part of the Stable ABI.

When o is non-NULL, returns a type object corresponding to the object type of object o. On failure, raises SystemError and returns NULL. This is equivalent to the Python expression type(o). This function creates a new strong reference to the return value. There’s really no reason to use this function instead of the Py_TYPE() function, which returns a pointer of type PyTypeObject*, except when a new strong reference is needed.

int PyObject_TypeCheck(PyObject *o, PyTypeObject *type)

Return non-zero if the object o is of type type or a subtype of type, and 0 otherwise. Both parameters must be non-NULL.

Py_ssize_t PyObject_Size(PyObject *o)

Py_ssize_t PyObject_Length(PyObject *o)

Part of the Stable ABI.

객체 o의 길이를 반환합니다. 객체 o가 시퀀스와 매핑 프로토콜을 제공하면, 시퀀스 길이가 반환됩니다. 에러가 발생하면 -1이 반환됩니다. 이것은 파이썬 표현식 len(o)와 동등합니다.

Py_ssize_t PyObject_LengthHint(PyObject *o, Py_ssize_t defaultvalue)

Return an estimated length for the object o. First try to return its actual length, then an estimate using __length_hint__(), and finally return the default value. On error return -1. This is the equivalent to the Python expression operator.length_hint(o, defaultvalue).

Added in version 3.4.

PyObject *PyObject_GetItem(PyObject *o, PyObject *key)

Return value: New reference. Part of the Stable ABI.

객체 key에 해당하는 o의 요소를 반환하거나 실패 시 NULL을 반환합니다. 이것은 파이썬 표현식 o[key]와 동등합니다.

int PyObject_SetItem(PyObject *o, PyObject *key, PyObject *v)

Part of the Stable ABI.

객체 key를 값 v에 매핑합니다. 실패 시 예외를 발생시키고 -1을 반환합니다; 성공하면 0을 반환합니다. 이것은 파이썬 문장 o[key] = v와 동등합니다. 이 함수는 v에 대한 참조를 훔치지 않습니다.

int PyObject_DelItem(PyObject *o, PyObject *key)

Part of the Stable ABI.

객체 o에서 객체 key에 대한 매핑을 제거합니다. 실패하면 -1을 반환합니다. 이것은 파이썬 문장 del o[key]와 동등합니다.

PyObject *PyObject_Dir(PyObject *o)

Return value: New reference. Part of the Stable ABI.

이것은 파이썬 표현식 dir(o)와 동등하며, 객체 인자에 적합한 문자열의 (비어있을 수 있는) 리스트를 반환하거나, 에러가 있으면 NULL을 반환합니다. 인자가 NULL이면, 파이썬 dir()과 비슷하며, 현재 지역(locals)의 이름들을 반환합니다; 이 경우, 실행 프레임이 활성화되어 있지 않으면 NULL이 반환되지만 PyErr_Occurred()는 거짓을 반환합니다.

PyObject *PyObject_GetIter(PyObject *o)

Return value: New reference. Part of the Stable ABI.

이것은 파이썬 표현식 iter(o)와 동등합니다. 객체 인자에 대한 새로운 이터레이터를 반환하거나, 객체가 이미 이터레이터이면 객체 자체를 반환합니다. 객체를 이터레이트 할 수 없으면 TypeError를 발생시키고 NULL을 반환합니다.

PyObject *PyObject_SelfIter(PyObject *obj)

Return value: New reference. Part of the Stable ABI.

This is equivalent to the Python __iter__(self): return self method. It is intended for iterator types, to be used in the PyTypeObject.tp_iter slot.

PyObject *PyObject_GetAIter(PyObject *o)

Return value: New reference. Part of the Stable ABI since version 3.10.

This is the equivalent to the Python expression aiter(o). Takes an AsyncIterable object and returns an AsyncIterator for it. This is typically a new iterator but if the argument is an AsyncIterator, this returns itself. Raises TypeError and returns NULL if the object cannot be iterated.

Added in version 3.10.

void *PyObject_GetTypeData(PyObject *o, PyTypeObject *cls)

Part of the Stable ABI since version 3.12.

Get a pointer to subclass-specific data reserved for cls.

The object o must be an instance of cls, and cls must have been created using negative PyType_Spec.basicsize. Python does not check this.

On error, set an exception and return NULL.

Added in version 3.12.

Py_ssize_t PyType_GetTypeDataSize(PyTypeObject *cls)

Part of the Stable ABI since version 3.12.

Return the size of the instance memory space reserved for cls, i.e. the size of the memory PyObject_GetTypeData() returns.

This may be larger than requested using -PyType_Spec.basicsize; it is safe to use this larger size (e.g. with memset()).

The type cls must have been created using negative PyType_Spec.basicsize. Python does not check this.

On error, set an exception and return a negative value.

Added in version 3.12.

void *PyObject_GetItemData(PyObject *o)

Get a pointer to per-item data for a class with Py_TPFLAGS_ITEMS_AT_END.

On error, set an exception and return NULL. TypeError is raised if o does not have Py_TPFLAGS_ITEMS_AT_END set.

Added in version 3.12.

int PyObject_VisitManagedDict(PyObject *obj, visitproc visit, void *arg)

Visit the managed dictionary of obj.

This function must only be called in a traverse function of the type which has the Py_TPFLAGS_MANAGED_DICT flag set.

Added in version 3.13.

void PyObject_ClearManagedDict(PyObject *obj)

Clear the managed dictionary of obj.

This function must only be called in a traverse function of the type which has the Py_TPFLAGS_MANAGED_DICT flag set.

Added in version 3.13.