`bisect` — Array bisection algorithm¶

소스 코드: Lib/bisect.py

This module provides support for maintaining a list in sorted order without having to sort the list after each insertion. For long lists of items with expensive comparison operations, this can be an improvement over linear searches or frequent resorting.

The module is called bisect because it uses a basic bisection algorithm to do its work. Unlike other bisection tools that search for a specific value, the functions in this module are designed to locate an insertion point. Accordingly, the functions never call an __eq__() method to determine whether a value has been found. Instead, the functions only call the __lt__() method and will return an insertion point between values in an array.

다음과 같은 함수가 제공됩니다:

bisect.bisect_left(a, x, lo=0, hi=len(a), *, key=None)¶

정렬된 순서를 유지하도록 a에 x를 삽입할 위치를 찾습니다. 매개 변수 lo 와 hi는 고려해야 할 리스트의 부분집합을 지정하는 데 사용될 수 있습니다; 기본적으로 전체 리스트가 사용됩니다. x가 a에 이미 있으면, 삽입 위치는 기존 항목 앞(왼쪽)이 됩니다. 반환 값은 a가 이미 정렬되었다고 가정할 때 list.insert()의 첫 번째 매개 변수로 사용하기에 적합합니다.

The returned insertion point ip partitions the array a into two slices such that all(elem < x for elem in a[lo : ip]) is true for the left slice and all(elem >= x for elem in a[ip : hi]) is true for the right slice.

key specifies a key function of one argument that is used to extract a comparison key from each element in the array. To support searching complex records, the key function is not applied to the x value.

If key is None, the elements are compared directly and no key function is called.

버전 3.10에서 변경: Added the key parameter.

bisect.bisect_right(a, x, lo=0, hi=len(a), *, key=None)¶

bisect.bisect(a, x, lo=0, hi=len(a), *, key=None)¶

Similar to bisect_left(), but returns an insertion point which comes after (to the right of) any existing entries of x in a.

The returned insertion point ip partitions the array a into two slices such that all(elem <= x for elem in a[lo : ip]) is true for the left slice and all(elem > x for elem in a[ip : hi]) is true for the right slice.

버전 3.10에서 변경: Added the key parameter.

bisect.insort_left(a, x, lo=0, hi=len(a), *, key=None)¶

Insert x in a in sorted order.

This function first runs bisect_left() to locate an insertion point. Next, it runs the insert() method on a to insert x at the appropriate position to maintain sort order.

To support inserting records in a table, the key function (if any) is applied to x for the search step but not for the insertion step.

Keep in mind that the O(log n) search is dominated by the slow O(n) insertion step.

버전 3.10에서 변경: Added the key parameter.

bisect.insort_right(a, x, lo=0, hi=len(a), *, key=None)¶

bisect.insort(a, x, lo=0, hi=len(a), *, key=None)¶

Similar to insort_left(), but inserting x in a after any existing entries of x.

This function first runs bisect_right() to locate an insertion point. Next, it runs the insert() method on a to insert x at the appropriate position to maintain sort order.

To support inserting records in a table, the key function (if any) is applied to x for the search step but not for the insertion step.

Keep in mind that the O(log n) search is dominated by the slow O(n) insertion step.

버전 3.10에서 변경: Added the key parameter.

Performance Notes¶

When writing time sensitive code using bisect() and insort(), keep these thoughts in mind:

Bisection is effective for searching ranges of values. For locating specific values, dictionaries are more performant.
The insort() functions are O(n) because the logarithmic search step is dominated by the linear time insertion step.
The search functions are stateless and discard key function results after they are used. Consequently, if the search functions are used in a loop, the key function may be called again and again on the same array elements. If the key function isn’t fast, consider wrapping it with functools.cache() to avoid duplicate computations. Alternatively, consider searching an array of precomputed keys to locate the insertion point (as shown in the examples section below).

Sorted Collections is a high performance module that uses bisect to managed sorted collections of data.
The SortedCollection recipe uses bisect to build a full-featured collection class with straight-forward search methods and support for a key-function. The keys are precomputed to save unnecessary calls to the key function during searches.

정렬된 리스트 검색하기¶

The above bisect functions are useful for finding insertion points but can be tricky or awkward to use for common searching tasks. The following five functions show how to transform them into the standard lookups for sorted lists:

def index(a, x):
    'Locate the leftmost value exactly equal to x'
    i = bisect_left(a, x)
    if i != len(a) and a[i] == x:
        return i
    raise ValueError

def find_lt(a, x):
    'Find rightmost value less than x'
    i = bisect_left(a, x)
    if i:
        return a[i-1]
    raise ValueError

def find_le(a, x):
    'Find rightmost value less than or equal to x'
    i = bisect_right(a, x)
    if i:
        return a[i-1]
    raise ValueError

def find_gt(a, x):
    'Find leftmost value greater than x'
    i = bisect_right(a, x)
    if i != len(a):
        return a[i]
    raise ValueError

def find_ge(a, x):
    'Find leftmost item greater than or equal to x'
    i = bisect_left(a, x)
    if i != len(a):
        return a[i]
    raise ValueError

Examples¶

The bisect() function can be useful for numeric table lookups. This example uses bisect() to look up a letter grade for an exam score (say) based on a set of ordered numeric breakpoints: 90 and up is an ‘A’, 80 to 89 is a ‘B’, and so on:

>>> def grade(score, breakpoints=[60, 70, 80, 90], grades='FDCBA'):
...     i = bisect(breakpoints, score)
...     return grades[i]
...
>>> [grade(score) for score in [33, 99, 77, 70, 89, 90, 100]]
['F', 'A', 'C', 'C', 'B', 'A', 'A']

The bisect() and insort() functions also work with lists of tuples. The key argument can serve to extract the field used for ordering records in a table:

>>> from collections import namedtuple
>>> from operator import attrgetter
>>> from bisect import bisect, insort
>>> from pprint import pprint

>>> Movie = namedtuple('Movie', ('name', 'released', 'director'))

>>> movies = [
...     Movie('Jaws', 1975, 'Spielberg'),
...     Movie('Titanic', 1997, 'Cameron'),
...     Movie('The Birds', 1963, 'Hitchcock'),
...     Movie('Aliens', 1986, 'Cameron')
... ]

>>> # Find the first movie released after 1960
>>> by_year = attrgetter('released')
>>> movies.sort(key=by_year)
>>> movies[bisect(movies, 1960, key=by_year)]
Movie(name='The Birds', released=1963, director='Hitchcock')

>>> # Insert a movie while maintaining sort order
>>> romance = Movie('Love Story', 1970, 'Hiller')
>>> insort(movies, romance, key=by_year)
>>> pprint(movies)
[Movie(name='The Birds', released=1963, director='Hitchcock'),
 Movie(name='Love Story', released=1970, director='Hiller'),
 Movie(name='Jaws', released=1975, director='Spielberg'),
 Movie(name='Aliens', released=1986, director='Cameron'),
 Movie(name='Titanic', released=1997, director='Cameron')]

If the key function is expensive, it is possible to avoid repeated function calls by searching a list of precomputed keys to find the index of a record:

>>> data = [('red', 5), ('blue', 1), ('yellow', 8), ('black', 0)]
>>> data.sort(key=lambda r: r[1])       # Or use operator.itemgetter(1).
>>> keys = [r[1] for r in data]         # Precompute a list of keys.
>>> data[bisect_left(keys, 0)]
('black', 0)
>>> data[bisect_left(keys, 1)]
('blue', 1)
>>> data[bisect_left(keys, 5)]
('red', 5)
>>> data[bisect_left(keys, 8)]
('yellow', 8)

`bisect` — Array bisection algorithm¶

Performance Notes¶

정렬된 리스트 검색하기¶

Examples¶

목차

이전 항목

다음 항목

이 페이지

bisect — Array bisection algorithm¶

Performance Notes¶

정렬된 리스트 검색하기¶

Examples¶

`bisect` — Array bisection algorithm¶