형 객체

type PyTypeObject
Part of the Limited API (as an opaque struct).

내장형을 기술하는 데 사용되는 객체의 C 구조체.

PyTypeObject PyType_Type
Part of the Stable ABI.

이것은 형 객체의 형 객체입니다; 파이썬 계층의 type과 같은 객체입니다.

int PyType_Check(PyObject *o)

객체 o가 표준형 객체에서 파생된 형의 인스턴스를 포함하여 형 객체면 0이 아닌 값을 반환합니다. 다른 모든 경우 0을 반환합니다. 이 함수는 항상 성공합니다.

int PyType_CheckExact(PyObject *o)

객체 o가 형 객체이지만, 표준형 객체의 서브 형이 아니면 0이 아닌 값을 반환합니다. 다른 모든 경우 0을 반환합니다. 이 함수는 항상 성공합니다.

unsigned int PyType_ClearCache()
Part of the Stable ABI.

내부 조회 캐시를 지웁니다. 현재의 버전 태그를 반환합니다.

unsigned long PyType_GetFlags(PyTypeObject *type)
Part of the Stable ABI.

Return the tp_flags member of type. This function is primarily meant for use with Py_LIMITED_API; the individual flag bits are guaranteed to be stable across Python releases, but access to tp_flags itself is not part of the limited API.

Added in version 3.2.

버전 3.4에서 변경: 반환형은 이제 long이 아니라 unsigned long입니다.

PyObject *PyType_GetDict(PyTypeObject *type)

Return the type object’s internal namespace, which is otherwise only exposed via a read-only proxy (cls.__dict__). This is a replacement for accessing tp_dict directly. The returned dictionary must be treated as read-only.

This function is meant for specific embedding and language-binding cases, where direct access to the dict is necessary and indirect access (e.g. via the proxy or PyObject_GetAttr()) isn’t adequate.

Extension modules should continue to use tp_dict, directly or indirectly, when setting up their own types.

Added in version 3.12.

void PyType_Modified(PyTypeObject *type)
Part of the Stable ABI.

형과 그것의 모든 서브 형에 대한 내부 검색 캐시를 무효로 합니다. 형의 어트리뷰트나 베이스 클래스를 수동으로 수정한 후에는 이 함수를 호출해야 합니다.

int PyType_AddWatcher(PyType_WatchCallback callback)

Register callback as a type watcher. Return a non-negative integer ID which must be passed to future calls to PyType_Watch(). In case of error (e.g. no more watcher IDs available), return -1 and set an exception.

Added in version 3.12.

int PyType_ClearWatcher(int watcher_id)

Clear watcher identified by watcher_id (previously returned from PyType_AddWatcher()). Return 0 on success, -1 on error (e.g. if watcher_id was never registered.)

An extension should never call PyType_ClearWatcher with a watcher_id that was not returned to it by a previous call to PyType_AddWatcher().

Added in version 3.12.

int PyType_Watch(int watcher_id, PyObject *type)

Mark type as watched. The callback granted watcher_id by PyType_AddWatcher() will be called whenever PyType_Modified() reports a change to type. (The callback may be called only once for a series of consecutive modifications to type, if _PyType_Lookup() is not called on type between the modifications; this is an implementation detail and subject to change.)

An extension should never call PyType_Watch with a watcher_id that was not returned to it by a previous call to PyType_AddWatcher().

Added in version 3.12.

typedef int (*PyType_WatchCallback)(PyObject *type)

Type of a type-watcher callback function.

The callback must not modify type or cause PyType_Modified() to be called on type or any type in its MRO; violating this rule could cause infinite recursion.

Added in version 3.12.

int PyType_HasFeature(PyTypeObject *o, int feature)

형 객체 o가 기능 feature를 설정하면 0이 아닌 값을 반환합니다. 형 기능은 단일 비트 플래그로 표시됩니다.

int PyType_IS_GC(PyTypeObject *o)

Return true if the type object includes support for the cycle detector; this tests the type flag Py_TPFLAGS_HAVE_GC.

int PyType_IsSubtype(PyTypeObject *a, PyTypeObject *b)
Part of the Stable ABI.

a가 b의 서브 형이면 참을 반환합니다.

This function only checks for actual subtypes, which means that __subclasscheck__() is not called on b. Call PyObject_IsSubclass() to do the same check that issubclass() would do.

PyObject *PyType_GenericAlloc(PyTypeObject *type, Py_ssize_t nitems)
Return value: New reference. Part of the Stable ABI.

형 객체의 tp_alloc 슬롯을 위한 일반 처리기. 파이썬의 기본 메모리 할당 메커니즘을 사용하여 새 인스턴스를 할당하고 모든 내용을 NULL로 초기화합니다.

PyObject *PyType_GenericNew(PyTypeObject *type, PyObject *args, PyObject *kwds)
Return value: New reference. Part of the Stable ABI.

형 객체의 tp_new 슬롯을 위한 일반 처리기. 형의 tp_alloc 슬롯을 사용하여 새 인스턴스를 만듭니다.

int PyType_Ready(PyTypeObject *type)
Part of the Stable ABI.

형 개체를 마무리합니다. 초기화를 완료하려면 모든 형 객체에 대해 이 메서드를 호출해야 합니다. 이 함수는 형의 베이스 클래스에서 상속된 슬롯을 추가합니다. 성공 시 0을 반환하고, 오류 시 -1을 반환하고 예외를 설정합니다.

참고

If some of the base classes implements the GC protocol and the provided type does not include the Py_TPFLAGS_HAVE_GC in its flags, then the GC protocol will be automatically implemented from its parents. On the contrary, if the type being created does include Py_TPFLAGS_HAVE_GC in its flags then it must implement the GC protocol itself by at least implementing the tp_traverse handle.

PyObject *PyType_GetName(PyTypeObject *type)
Return value: New reference. Part of the Stable ABI since version 3.11.

Return the type’s name. Equivalent to getting the type’s __name__ attribute.

Added in version 3.11.

PyObject *PyType_GetQualName(PyTypeObject *type)
Return value: New reference. Part of the Stable ABI since version 3.11.

Return the type’s qualified name. Equivalent to getting the type’s __qualname__ attribute.

Added in version 3.11.

void *PyType_GetSlot(PyTypeObject *type, int slot)
Part of the Stable ABI since version 3.4.

지정된 슬롯에 저장된 함수 포인터를 반환합니다. 결과가 NULL이면, 슬롯이 NULL이거나 함수가 유효하지 않은 매개 변수로 호출되었음을 나타냅니다. 호출자는 일반적으로 결과 포인터를 적절한 함수 형으로 캐스팅합니다.

slot 인자의 가능한 값은 PyType_Slot.slot을 참조하십시오.

Added in version 3.4.

버전 3.10에서 변경: PyType_GetSlot() can now accept all types. Previously, it was limited to heap types.

PyObject *PyType_GetModule(PyTypeObject *type)
Part of the Stable ABI since version 3.10.

PyType_FromModuleAndSpec()를 사용하여 형을 만들 때 지정된 형과 관련된 모듈 객체를 반환합니다.

주어진 형과 연관된 모듈이 없으면, TypeError를 설정하고 NULL을 반환합니다.

This function is usually used to get the module in which a method is defined. Note that in such a method, PyType_GetModule(Py_TYPE(self)) may not return the intended result. Py_TYPE(self) may be a subclass of the intended class, and subclasses are not necessarily defined in the same module as their superclass. See PyCMethod to get the class that defines the method. See PyType_GetModuleByDef() for cases when PyCMethod cannot be used.

Added in version 3.9.

void *PyType_GetModuleState(PyTypeObject *type)
Part of the Stable ABI since version 3.10.

주어진 형과 관련된 모듈 객체의 상태를 반환합니다. PyType_GetModule() 결과에 PyModule_GetState()를 호출하는 바로 가기입니다.

주어진 형과 연관된 모듈이 없으면, TypeError를 설정하고 NULL을 반환합니다.

type에 연관된 모듈이 있지만, 상태가 NULL이면, 예외를 설정하지 않고 NULL을 반환합니다.

Added in version 3.9.

PyObject *PyType_GetModuleByDef(PyTypeObject *type, struct PyModuleDef *def)

Find the first superclass whose module was created from the given PyModuleDef def, and return that module.

If no module is found, raises a TypeError and returns NULL.

This function is intended to be used together with PyModule_GetState() to get module state from slot methods (such as tp_init or nb_add) and other places where a method’s defining class cannot be passed using the PyCMethod calling convention.

Added in version 3.11.

int PyUnstable_Type_AssignVersionTag(PyTypeObject *type)
This is Unstable API. It may change without warning in minor releases.

Attempt to assign a version tag to the given type.

Returns 1 if the type already had a valid version tag or a new one was assigned, or 0 if a new tag could not be assigned.

Added in version 3.12.

힙에 할당된 형 만들기

다음 함수와 구조체는 힙 형을 만드는 데 사용됩니다.

PyObject *PyType_FromMetaclass(PyTypeObject *metaclass, PyObject *module, PyType_Spec *spec, PyObject *bases)
Part of the Stable ABI since version 3.12.

Create and return a heap type from the spec (see Py_TPFLAGS_HEAPTYPE).

The metaclass metaclass is used to construct the resulting type object. When metaclass is NULL, the metaclass is derived from bases (or Py_tp_base[s] slots if bases is NULL, see below).

Metaclasses that override tp_new are not supported, except if tp_new is NULL. (For backwards compatibility, other PyType_From* functions allow such metaclasses. They ignore tp_new, which may result in incomplete initialization. This is deprecated and in Python 3.14+ such metaclasses will not be supported.)

The bases argument can be used to specify base classes; it can either be only one class or a tuple of classes. If bases is NULL, the Py_tp_bases slot is used instead. If that also is NULL, the Py_tp_base slot is used instead. If that also is NULL, the new type derives from object.

The module argument can be used to record the module in which the new class is defined. It must be a module object or NULL. If not NULL, the module is associated with the new type and can later be retrieved with PyType_GetModule(). The associated module is not inherited by subclasses; it must be specified for each class individually.

이 함수는 새로운 형에 PyType_Ready()를 호출합니다.

Note that this function does not fully match the behavior of calling type() or using the class statement. With user-provided base types or metaclasses, prefer calling type (or the metaclass) over PyType_From* functions. Specifically:

Added in version 3.12.

PyObject *PyType_FromModuleAndSpec(PyObject *module, PyType_Spec *spec, PyObject *bases)
Return value: New reference. Part of the Stable ABI since version 3.10.

Equivalent to PyType_FromMetaclass(NULL, module, spec, bases).

Added in version 3.9.

버전 3.10에서 변경: The function now accepts a single class as the bases argument and NULL as the tp_doc slot.

버전 3.12에서 변경: The function now finds and uses a metaclass corresponding to the provided base classes. Previously, only type instances were returned.

The tp_new of the metaclass is ignored. which may result in incomplete initialization. Creating classes whose metaclass overrides tp_new is deprecated and in Python 3.14+ it will be no longer allowed.

PyObject *PyType_FromSpecWithBases(PyType_Spec *spec, PyObject *bases)
Return value: New reference. Part of the Stable ABI since version 3.3.

Equivalent to PyType_FromMetaclass(NULL, NULL, spec, bases).

Added in version 3.3.

버전 3.12에서 변경: The function now finds and uses a metaclass corresponding to the provided base classes. Previously, only type instances were returned.

The tp_new of the metaclass is ignored. which may result in incomplete initialization. Creating classes whose metaclass overrides tp_new is deprecated and in Python 3.14+ it will be no longer allowed.

PyObject *PyType_FromSpec(PyType_Spec *spec)
Return value: New reference. Part of the Stable ABI.

Equivalent to PyType_FromMetaclass(NULL, NULL, spec, NULL).

버전 3.12에서 변경: The function now finds and uses a metaclass corresponding to the base classes provided in Py_tp_base[s] slots. Previously, only type instances were returned.

The tp_new of the metaclass is ignored. which may result in incomplete initialization. Creating classes whose metaclass overrides tp_new is deprecated and in Python 3.14+ it will be no longer allowed.

type PyType_Spec
Part of the Stable ABI (including all members).

형의 행동을 정의하는 구조체.

const char *name

형의 이름, PyTypeObject.tp_name을 설정하는 데 사용됩니다.

int basicsize

If positive, specifies the size of the instance in bytes. It is used to set PyTypeObject.tp_basicsize.

If zero, specifies that tp_basicsize should be inherited.

If negative, the absolute value specifies how much space instances of the class need in addition to the superclass. Use PyObject_GetTypeData() to get a pointer to subclass-specific memory reserved this way.

버전 3.12에서 변경: Previously, this field could not be negative.

int itemsize

Size of one element of a variable-size type, in bytes. Used to set PyTypeObject.tp_itemsize. See tp_itemsize documentation for caveats.

If zero, tp_itemsize is inherited. Extending arbitrary variable-sized classes is dangerous, since some types use a fixed offset for variable-sized memory, which can then overlap fixed-sized memory used by a subclass. To help prevent mistakes, inheriting itemsize is only possible in the following situations:

unsigned int flags

형 플래그, PyTypeObject.tp_flags를 설정하는 데 사용됩니다.

Py_TPFLAGS_HEAPTYPE 플래그가 설정되어 있지 않으면, PyType_FromSpecWithBases() 가 자동으로 플래그를 설정합니다.

PyType_Slot *slots

PyType_Slot 구조체의 배열. 특수 슬롯값 {0, NULL}에 의해 종료됩니다.

Each slot ID should be specified at most once.

type PyType_Slot
Part of the Stable ABI (including all members).

형의 선택적 기능을 정의하는 구조체, 슬롯 ID와 값 포인터를 포함합니다.

int slot

슬롯 ID.

슬롯 ID는 구조체 PyTypeObject, PyNumberMethods, PySequenceMethods, PyMappingMethods 및 PyAsyncMethods 의 필드 이름에 Py_ 접두사를 붙인 이름을 사용합니다. 예를 들어, :

The following “offset” fields cannot be set using PyType_Slot:

If it is not possible to switch to a MANAGED flag (for example, for vectorcall or to support Python older than 3.12), specify the offset in Py_tp_members. See PyMemberDef documentation for details.

The following fields cannot be set at all when creating a heap type:

Setting Py_tp_bases or Py_tp_base may be problematic on some platforms. To avoid issues, use the bases argument of PyType_FromSpecWithBases() instead.

버전 3.9에서 변경: Slots in PyBufferProcs may be set in the unlimited API.

버전 3.11에서 변경: bf_getbuffer and bf_releasebuffer are now available under the limited API.

void *pfunc

슬롯의 원하는 값입니다. 대부분 이것은 함수에 대한 포인터입니다.

Slots other than Py_tp_doc may not be NULL.