`traceback` — 스택 트레이스백 인쇄와 조회¶

소스 코드: Lib/traceback.py

이 모듈은 파이썬 프로그램의 스택 트레이스를 추출, 포맷 및 인쇄하는 표준 인터페이스를 제공합니다. 스택 트레이스를 인쇄할 때 파이썬 인터프리터의 동작을 정확하게 모방합니다. 이것은 가령 인터프리터를 둘러싸는 “래퍼”처럼 프로그램 제어 하에서 스택 트레이스를 인쇄하려고 할 때 유용합니다.

The module uses traceback objects — these are objects of type types.TracebackType, which are assigned to the __traceback__ field of BaseException instances.

Module faulthandler: Used to dump Python tracebacks explicitly, on a fault, after a timeout, or on a user signal.
Module pdb: Interactive source code debugger for Python programs.

이 모듈은 다음 함수를 정의합니다:

traceback.print_tb(tb, limit=None, file=None)¶: Print up to limit stack trace entries from traceback object tb (starting from the caller’s frame) if limit is positive. Otherwise, print the last abs(limit) entries. If limit is omitted or None, all entries are printed. If file is omitted or None, the output goes to sys.stderr; otherwise it should be an open file or file-like object to receive the output.

버전 3.5에서 변경: 음수 limit 지원을 추가했습니다.

traceback.print_exception(exc, /, [value, tb, ]limit=None, file=None, chain=True)¶

Print exception information and stack trace entries from traceback object tb to file. This differs from print_tb() in the following ways:

tb가 None이 아니면, 헤더 Traceback (most recent call last):를 인쇄합니다.
it prints the exception type and value after the stack trace

type(value)가 SyntaxError고 value가 적절한 형식을 가지면, 에러의 대략적인 위치를 나타내는 캐럿(caret)과 함께 문법 에러가 발생한 줄을 인쇄합니다.

Since Python 3.10, instead of passing value and tb, an exception object can be passed as the first argument. If value and tb are provided, the first argument is ignored in order to provide backwards compatibility.

The optional limit argument has the same meaning as for print_tb(). If chain is true (the default), then chained exceptions (the __cause__ or __context__ attributes of the exception) will be printed as well, like the interpreter itself does when printing an unhandled exception.

버전 3.5에서 변경: etype 인자는 무시되고 value 형에서 유추됩니다.

버전 3.10에서 변경: The etype parameter has been renamed to exc and is now positional-only.

traceback.print_exc(limit=None, file=None, chain=True)¶: This is a shorthand for print_exception(sys.exception(), limit, file, chain).

traceback.print_last(limit=None, file=None, chain=True)¶: 이것은 print_exception(sys.last_type, sys.last_value, sys.last_traceback, limit, file, chain)의 줄임 표현입니다. 일반적으로 예외가 대화식 프롬프트에 도달한 후에만 작동합니다 (sys.last_type을 참조하십시오).

traceback.print_stack(f=None, limit=None, file=None)¶: Print up to limit stack trace entries (starting from the invocation point) if limit is positive. Otherwise, print the last abs(limit) entries. If limit is omitted or None, all entries are printed. The optional f argument can be used to specify an alternate stack frame to start. The optional file argument has the same meaning as for print_tb().

버전 3.5에서 변경: 음수 limit 지원을 추가했습니다.

traceback.extract_tb(tb, limit=None)¶: Return a StackSummary object representing a list of “pre-processed” stack trace entries extracted from the traceback object tb. It is useful for alternate formatting of stack traces. The optional limit argument has the same meaning as for print_tb(). A “pre-processed” stack trace entry is a FrameSummary object containing attributes filename, lineno, name, and line representing the information that is usually printed for a stack trace.

traceback.extract_stack(f=None, limit=None)¶: Extract the raw traceback from the current stack frame. The return value has the same format as for extract_tb(). The optional f and limit arguments have the same meaning as for print_stack().

traceback.format_list(extracted_list)¶: extract_tb()나 extract_stack()이 반환한 튜플이나 FrameSummary 객체의 리스트가 제공되면, 인쇄할 준비가 된 문자열의 리스트를 반환합니다. 결과 리스트의 각 문자열은 인자 리스트에서 같은 인덱스를 가진 항목에 해당합니다. 각 문자열은 줄 바꿈으로 끝납니다; 소스 텍스트 줄이 None이 아닌 항목의 경우, 문자열에 내부 줄 바꿈도 포함될 수 있습니다.

traceback.format_exception_only(exc, /[, value])¶

Format the exception part of a traceback using an exception value such as given by sys.last_value. The return value is a list of strings, each ending in a newline. The list contains the exception’s message, which is normally a single string; however, for SyntaxError exceptions, it contains several lines that (when printed) display detailed information about where the syntax error occurred. Following the message, the list contains the exception’s notes.

Since Python 3.10, instead of passing value, an exception object can be passed as the first argument. If value is provided, the first argument is ignored in order to provide backwards compatibility.

버전 3.10에서 변경: The etype parameter has been renamed to exc and is now positional-only.

버전 3.11에서 변경: The returned list now includes any notes attached to the exception.

traceback.format_exception(exc, /, [value, tb, ]limit=None, chain=True)¶: 스택 트레이스와 예외 정보를 포맷합니다. 인자는 print_exception()의 해당하는 인자와 같은 의미입니다. 반환 값은 각각 줄 바꿈으로 끝나고 일부는 내부 줄 바꿈을 포함하는 문자열의 리스트입니다. 이 줄들을 이어붙여서 인쇄하면, print_exception()과 정확히 같은 텍스트가 인쇄됩니다.

버전 3.5에서 변경: etype 인자는 무시되고 value 형에서 유추됩니다.

버전 3.10에서 변경: This function’s behavior and signature were modified to match print_exception().

traceback.format_exc(limit=None, chain=True)¶: 이것은 print_exc(limit)와 비슷하지만, 파일로 인쇄하는 대신 문자열을 반환합니다.

traceback.format_tb(tb, limit=None)¶: format_list(extract_tb(tb, limit))의 줄임 표현입니다.

traceback.format_stack(f=None, limit=None)¶: format_list(extract_stack(f, limit))의 줄임 표현입니다.

traceback.clear_frames(tb)¶: Clears the local variables of all the stack frames in a traceback tb by calling the clear() method of each frame object.

버전 3.4에 추가.

traceback.walk_stack(f)¶: Walk a stack following f.f_back from the given frame, yielding the frame and line number for each frame. If f is None, the current stack is used. This helper is used with StackSummary.extract().

버전 3.5에 추가.

traceback.walk_tb(tb)¶: Walk a traceback following tb_next yielding the frame and line number for each frame. This helper is used with StackSummary.extract().

버전 3.5에 추가.

이 모듈은 또한 다음과 같은 클래스를 정의합니다:

`TracebackException` Objects¶

버전 3.5에 추가.

TracebackException objects are created from actual exceptions to capture data for later printing in a lightweight fashion.

class traceback.TracebackException(exc_type, exc_value, exc_traceback, *, limit=None, lookup_lines=True, capture_locals=False, compact=False, max_group_width=15, max_group_depth=10)¶

나중에 렌더링하기 위해 예외를 포착합니다. limit, lookup_lines 및 capture_locals는 StackSummary 클래스와 같습니다.

If compact is true, only data that is required by TracebackException’s format() method is saved in the class attributes. In particular, the __context__ field is calculated only if __cause__ is None and __suppress_context__ is false.

locals가 포착되면, 트레이스백에도 표시됨에 유의하십시오.

max_group_width and max_group_depth control the formatting of exception groups (see BaseExceptionGroup). The depth refers to the nesting level of the group, and the width refers to the size of a single exception group’s exceptions array. The formatted output is truncated when either limit is exceeded.

버전 3.10에서 변경: Added the compact parameter.

버전 3.11에서 변경: Added the max_group_width and max_group_depth parameters.

__cause__¶: A TracebackException of the original __cause__.

__context__¶: A TracebackException of the original __context__.

exceptions¶: If self represents an ExceptionGroup, this field holds a list of TracebackException instances representing the nested exceptions. Otherwise it is None.

버전 3.11에 추가.

__suppress_context__¶: The __suppress_context__ value from the original exception.

__notes__¶: The __notes__ value from the original exception, or None if the exception does not have any notes. If it is not None is it formatted in the traceback after the exception string.

버전 3.11에 추가.

stack¶: 트레이스백을 나타내는 StackSummary.

exc_type¶: 원래 트레이스백의 클래스.

filename¶: 문법 에러일 때 - 에러가 발생한 파일 이름.

lineno¶: 문법 에러일 때 - 에러가 발생한 줄 번호.

end_lineno¶: For syntax errors - the end line number where the error occurred. Can be None if not present.

버전 3.10에 추가.

text¶: 문법 에러일 때 - 에러가 발생한 텍스트.

offset¶: 문법 에러일 때 - 에러가 발생한 텍스트에서의 오프셋.

end_offset¶: For syntax errors - the end offset into the text where the error occurred. Can be None if not present.

버전 3.10에 추가.

msg¶: 문법 에러일 때 - 컴파일러 에러 메시지.

classmethod from_exception(exc, *, limit=None, lookup_lines=True, capture_locals=False)¶

나중에 렌더링하기 위해 예외를 포착합니다. limit, lookup_lines 및 capture_locals는 StackSummary 클래스와 같습니다.

locals가 포착되면, 트레이스백에도 표시됨에 유의하십시오.

print(*, file=None, chain=True)¶: Print to file (default sys.stderr) the exception information returned by format().

버전 3.11에 추가.

format(*, chain=True)¶

예외를 포맷합니다.

If chain is not True, __cause__ and __context__ will not be formatted.

반환 값은 각각 줄 바꿈으로 끝나고 일부는 내부 줄 바꿈을 포함하는 문자열의 제너레이터입니다. print_exception()은 단지 파일에 줄을 인쇄하는 이 메서드를 둘러싸는 래퍼입니다.

format_exception_only()¶

트레이스백의 예외 부분을 포맷합니다.

반환 값은 각각 줄 바꿈으로 끝나는 문자열의 제너레이터입니다.

The generator emits the exception’s message followed by its notes (if it has any). The exception message is normally a single string; however, for SyntaxError exceptions, it consists of several lines that (when printed) display detailed information about where the syntax error occurred.

버전 3.11에서 변경: The exception’s notes are now included in the output.

`StackSummary` Objects¶

버전 3.5에 추가.

StackSummary objects represent a call stack ready for formatting.

class traceback.StackSummary¶

classmethod extract(frame_gen, *, limit=None, lookup_lines=True, capture_locals=False)¶

Construct a StackSummary object from a frame generator (such as is returned by walk_stack() or walk_tb()).

If limit is supplied, only this many frames are taken from frame_gen. If lookup_lines is False, the returned FrameSummary objects will not have read their lines in yet, making the cost of creating the StackSummary cheaper (which may be valuable if it may not actually get formatted). If capture_locals is True the local variables in each FrameSummary are captured as object representations.

classmethod from_list(a_list)¶: Construct a StackSummary object from a supplied list of FrameSummary objects or old-style list of tuples. Each tuple should be a 4-tuple with filename, lineno, name, line as the elements.

format()¶

Returns a list of strings ready for printing. Each string in the resulting list corresponds to a single frame from the stack. Each string ends in a newline; the strings may contain internal newlines as well, for those items with source text lines.

같은 프레임과 줄의 긴 시퀀스의 경우, 처음 몇 번의 반복이 표시된 다음, 정확한 추가의 반복 횟수를 나타내는 요약 줄이 표시됩니다.

버전 3.6에서 변경: 반복되는 프레임의 긴 시퀀스가 이제 축약됩니다.

format_frame_summary(frame_summary)¶: Returns a string for printing one of the frames involved in the stack. This method is called for each FrameSummary object to be printed by StackSummary.format(). If it returns None, the frame is omitted from the output.

버전 3.11에 추가.

`FrameSummary` Objects¶

버전 3.5에 추가.

A FrameSummary object represents a single frame in a traceback.

class traceback.FrameSummary(filename, lineno, name, lookup_line=True, locals=None, line=None)¶

Represents a single frame in the traceback or stack that is being formatted or printed. It may optionally have a stringified version of the frame’s locals included in it. If lookup_line is False, the source code is not looked up until the FrameSummary has the line attribute accessed (which also happens when casting it to a tuple). line may be directly provided, and will prevent line lookups happening at all. locals is an optional local variable dictionary, and if supplied the variable representations are stored in the summary for later display.

FrameSummary instances have the following attributes:

filename¶: The filename of the source code for this frame. Equivalent to accessing f.f_code.co_filename on a frame object f.

lineno¶: The line number of the source code for this frame.

name¶: Equivalent to accessing f.f_code.co_name on a frame object f.

line¶: A string representing the source code for this frame, with leading and trailing whitespace stripped. If the source is not available, it is None.

트레이스백 예제¶

이 간단한 예제는 표준 파이썬 대화식 인터프리터 루프와 비슷하지만 (하지만 덜 유용한) 기본적인 읽기-평가-인쇄 루프를 구현합니다. 인터프리터 루프의 더욱 완전한 구현은 code 모듈을 참조하십시오.

import sys, traceback

def run_user_code(envdir):
    source = input(">>> ")
    try:
        exec(source, envdir)
    except Exception:
        print("Exception in user code:")
        print("-"*60)
        traceback.print_exc(file=sys.stdout)
        print("-"*60)

envdir = {}
while True:
    run_user_code(envdir)

다음 예제는 예외와 추적을 인쇄하고 포맷하는 다양한 방법을 보여줍니다:

import sys, traceback

def lumberjack():
    bright_side_of_life()

def bright_side_of_life():
    return tuple()[0]

try:
    lumberjack()
except IndexError:
    exc = sys.exception()
    print("*** print_tb:")
    traceback.print_tb(exc.__traceback__, limit=1, file=sys.stdout)
    print("*** print_exception:")
    traceback.print_exception(exc, limit=2, file=sys.stdout)
    print("*** print_exc:")
    traceback.print_exc(limit=2, file=sys.stdout)
    print("*** format_exc, first and last line:")
    formatted_lines = traceback.format_exc().splitlines()
    print(formatted_lines[0])
    print(formatted_lines[-1])
    print("*** format_exception:")
    print(repr(traceback.format_exception(exc)))
    print("*** extract_tb:")
    print(repr(traceback.extract_tb(exc.__traceback__)))
    print("*** format_tb:")
    print(repr(traceback.format_tb(exc.__traceback__)))
    print("*** tb_lineno:", exc.__traceback__.tb_lineno)

예제의 출력은 다음과 유사합니다:

*** print_tb:
  File "<doctest...>", line 10, in <module>
    lumberjack()
*** print_exception:
Traceback (most recent call last):
  File "<doctest...>", line 10, in <module>
    lumberjack()
  File "<doctest...>", line 4, in lumberjack
    bright_side_of_life()
IndexError: tuple index out of range
*** print_exc:
Traceback (most recent call last):
  File "<doctest...>", line 10, in <module>
    lumberjack()
  File "<doctest...>", line 4, in lumberjack
    bright_side_of_life()
IndexError: tuple index out of range
*** format_exc, first and last line:
Traceback (most recent call last):
IndexError: tuple index out of range
*** format_exception:
['Traceback (most recent call last):\n',
 '  File "<doctest default[0]>", line 10, in <module>\n    lumberjack()\n',
 '  File "<doctest default[0]>", line 4, in lumberjack\n    bright_side_of_life()\n',
 '  File "<doctest default[0]>", line 7, in bright_side_of_life\n    return tuple()[0]\n           ~~~~~~~^^^\n',
 'IndexError: tuple index out of range\n']
*** extract_tb:
[<FrameSummary file <doctest...>, line 10 in <module>>,
 <FrameSummary file <doctest...>, line 4 in lumberjack>,
 <FrameSummary file <doctest...>, line 7 in bright_side_of_life>]
*** format_tb:
['  File "<doctest default[0]>", line 10, in <module>\n    lumberjack()\n',
 '  File "<doctest default[0]>", line 4, in lumberjack\n    bright_side_of_life()\n',
 '  File "<doctest default[0]>", line 7, in bright_side_of_life\n    return tuple()[0]\n           ~~~~~~~^^^\n']
*** tb_lineno: 10

다음 예제는 스택을 인쇄하고 포맷하는 다양한 방법을 보여줍니다:

>>> import traceback
>>> def another_function():
...     lumberstack()
...
>>> def lumberstack():
...     traceback.print_stack()
...     print(repr(traceback.extract_stack()))
...     print(repr(traceback.format_stack()))
...
>>> another_function()
  File "<doctest>", line 10, in <module>
    another_function()
  File "<doctest>", line 3, in another_function
    lumberstack()
  File "<doctest>", line 6, in lumberstack
    traceback.print_stack()
[('<doctest>', 10, '<module>', 'another_function()'),
 ('<doctest>', 3, 'another_function', 'lumberstack()'),
 ('<doctest>', 7, 'lumberstack', 'print(repr(traceback.extract_stack()))')]
['  File "<doctest>", line 10, in <module>\n    another_function()\n',
 '  File "<doctest>", line 3, in another_function\n    lumberstack()\n',
 '  File "<doctest>", line 8, in lumberstack\n    print(repr(traceback.format_stack()))\n']

이 마지막 예제는 마지막 몇 가지 포매팅 함수를 예시합니다:

>>> import traceback
>>> traceback.format_list([('spam.py', 3, '<module>', 'spam.eggs()'),
...                        ('eggs.py', 42, 'eggs', 'return "bacon"')])
['  File "spam.py", line 3, in <module>\n    spam.eggs()\n',
 '  File "eggs.py", line 42, in eggs\n    return "bacon"\n']
>>> an_error = IndexError('tuple index out of range')
>>> traceback.format_exception_only(type(an_error), an_error)
['IndexError: tuple index out of range\n']

`traceback` — 스택 트레이스백 인쇄와 조회¶

`TracebackException` Objects¶

`StackSummary` Objects¶

`FrameSummary` Objects¶

트레이스백 예제¶

목차

이전 항목

다음 항목

이 페이지

traceback — 스택 트레이스백 인쇄와 조회¶

TracebackException Objects¶

StackSummary Objects¶

FrameSummary Objects¶

트레이스백 예제¶

`traceback` — 스택 트레이스백 인쇄와 조회¶

`TracebackException` Objects¶

`StackSummary` Objects¶

`FrameSummary` Objects¶