유니코드 객체와 코덱
********************


유니코드 객체
=============

파이썬 3.3에서 **PEP 393**을 구현한 이후, 유니코드 객체는 내부적으로
다양한 표현을 사용하여 전체 유니코드 문자 범위를 처리하면서 메모리 효
율성을 유지합니다. 모든 코드 포인트가 128, 256 또는 65536 미만인 문자
열에 대한 특별한 경우가 있습니다; 그렇지 않으면, 코드 포인트는 1114112
(전체 유니코드 범위) 미만이어야 합니다.

Py_UNICODE* and UTF-8 representations are created on demand and cached
in the Unicode object.  The Py_UNICODE* representation is deprecated
and inefficient.

Due to the transition between the old APIs and the new APIs, Unicode
objects can internally be in two states depending on how they were
created:

* "canonical" Unicode objects are all objects created by a non-
  deprecated Unicode API.  They use the most efficient representation
  allowed by the implementation.

* "legacy" Unicode objects have been created through one of the
  deprecated APIs (typically "PyUnicode_FromUnicode()") and only bear
  the Py_UNICODE* representation; you will have to call
  "PyUnicode_READY()" on them before calling any other API.

참고:

  The "legacy" Unicode object will be removed in Python 3.12 with
  deprecated APIs. All Unicode objects will be "canonical" since then.
  See **PEP 623** for more information.


유니코드 형
-----------

다음은 파이썬에서 유니코드 구현에 사용되는 기본 유니코드 객체 형입니다
:

type Py_UCS4
type Py_UCS2
type Py_UCS1
    * Part of the 안정 ABI.*

   이 형들은 각각 32비트, 16비트 및 8비트의 문자를 포함하기에 충분한
   부호 없는 정수 형을 위한 typedef 입니다. 단일 유니코드 문자를 처리
   할 때는, "Py_UCS4"를 사용하십시오.

   버전 3.3에 추가.

type Py_UNICODE

   이것은 플랫폼에 따라 16비트 형이나 32비트 형인 "wchar_t"의 typedef
   입니다.

   버전 3.3에서 변경: 이전 버전에서, 이것은 빌드 시 파이썬의 "내로우
   (narrow)"나 "와이드(wide)" 유니코드 버전 중 어느 것을 선택했는지에
   따라 16비트 형이나 32비트 형이었습니다.

type PyASCIIObject
type PyCompactUnicodeObject
type PyUnicodeObject

   이 "PyObject" 서브 형들은 파이썬 유니코드 객체를 나타냅니다. 거의
   모든 경우에, 유니코드 객체를 처리하는 모든 API 함수가 "PyObject" 포
   인터를 취하고 반환하므로 직접 사용해서는 안 됩니다.

   버전 3.3에 추가.

PyTypeObject PyUnicode_Type
    * Part of the 안정 ABI.*

   이 "PyTypeObject" 인스턴스는 파이썬 유니코드 형을 나타냅니다. 파이
   썬 코드에 "str"로 노출됩니다.

The following APIs are C macros and static inlined functions for fast
checks and access to internal read-only data of Unicode objects:

int PyUnicode_Check(PyObject *obj)

   Return true if the object *obj* is a Unicode object or an instance
   of a Unicode subtype.  This function always succeeds.

int PyUnicode_CheckExact(PyObject *obj)

   Return true if the object *obj* is a Unicode object, but not an
   instance of a subtype.  This function always succeeds.

int PyUnicode_READY(PyObject *unicode)

   Ensure the string object *o* is in the "canonical" representation.
   This is required before using any of the access macros described
   below.

   Returns "0" on success and "-1" with an exception set on failure,
   which in particular happens if memory allocation fails.

   버전 3.3에 추가.

   버전 3.10에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: This API
   will be removed with "PyUnicode_FromUnicode()".

Py_ssize_t PyUnicode_GET_LENGTH(PyObject *unicode)

   Return the length of the Unicode string, in code points.  *unicode*
   has to be a Unicode object in the "canonical" representation (not
   checked).

   버전 3.3에 추가.

Py_UCS1 *PyUnicode_1BYTE_DATA(PyObject *unicode)
Py_UCS2 *PyUnicode_2BYTE_DATA(PyObject *unicode)
Py_UCS4 *PyUnicode_4BYTE_DATA(PyObject *unicode)

   Return a pointer to the canonical representation cast to UCS1, UCS2
   or UCS4 integer types for direct character access.  No checks are
   performed if the canonical representation has the correct character
   size; use "PyUnicode_KIND()" to select the right macro.  Make sure
   "PyUnicode_READY()" has been called before accessing this.

   버전 3.3에 추가.

PyUnicode_WCHAR_KIND
PyUnicode_1BYTE_KIND
PyUnicode_2BYTE_KIND
PyUnicode_4BYTE_KIND

   "PyUnicode_KIND()" 매크로의 값을 반환합니다.

   버전 3.3에 추가.

   버전 3.10에서 폐지되었습니다, 버전 3.12에서 제거됩니다.:
   "PyUnicode_WCHAR_KIND" is deprecated.

int PyUnicode_KIND(PyObject *unicode)

   Return one of the PyUnicode kind constants (see above) that
   indicate how many bytes per character this Unicode object uses to
   store its data.  *unicode* has to be a Unicode object in the
   "canonical" representation (not checked).

   버전 3.3에 추가.

void *PyUnicode_DATA(PyObject *unicode)

   Return a void pointer to the raw Unicode buffer.  *unicode* has to
   be a Unicode object in the "canonical" representation (not
   checked).

   버전 3.3에 추가.

void PyUnicode_WRITE(int kind, void *data, Py_ssize_t index, Py_UCS4 value)

   Write into a canonical representation *data* (as obtained with
   "PyUnicode_DATA()").  This function performs no sanity checks, and
   is intended for usage in loops.  The caller should cache the *kind*
   value and *data* pointer as obtained from other calls.  *index* is
   the index in the string (starts at 0) and *value* is the new code
   point value which should be written to that location.

   버전 3.3에 추가.

Py_UCS4 PyUnicode_READ(int kind, void *data, Py_ssize_t index)

   규범적(canonical) 표현 *data*("PyUnicode_DATA()"로 얻은 대로)에서
   코드 포인트를 읽습니다. 검사나 준비(ready) 호출이 수행되지 않습니다
   .

   버전 3.3에 추가.

Py_UCS4 PyUnicode_READ_CHAR(PyObject *unicode, Py_ssize_t index)

   Read a character from a Unicode object *unicode*, which must be in
   the "canonical" representation.  This is less efficient than
   "PyUnicode_READ()" if you do multiple consecutive reads.

   버전 3.3에 추가.

Py_UCS4 PyUnicode_MAX_CHAR_VALUE(PyObject *unicode)

   Return the maximum code point that is suitable for creating another
   string based on *unicode*, which must be in the "canonical"
   representation.  This is always an approximation but more efficient
   than iterating over the string.

   버전 3.3에 추가.

Py_ssize_t PyUnicode_GET_SIZE(PyObject *unicode)

   Return the size of the deprecated "Py_UNICODE" representation, in
   code units (this includes surrogate pairs as 2 units).  *unicode*
   has to be a Unicode object (not checked).

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_GET_LENGTH()".

Py_ssize_t PyUnicode_GET_DATA_SIZE(PyObject *unicode)

   Return the size of the deprecated "Py_UNICODE" representation in
   bytes.  *unicode* has to be a Unicode object (not checked).

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_GET_LENGTH()".

Py_UNICODE *PyUnicode_AS_UNICODE(PyObject *unicode)
const char *PyUnicode_AS_DATA(PyObject *unicode)

   Return a pointer to a "Py_UNICODE" representation of the object.
   The returned buffer is always terminated with an extra null code
   point.  It may also contain embedded null code points, which would
   cause the string to be truncated when used in most C functions.
   The "AS_DATA" form casts the pointer to const char*.  The *unicode*
   argument has to be a Unicode object (not checked).

   버전 3.3에서 변경: This function is now inefficient -- because in
   many cases the "Py_UNICODE" representation does not exist and needs
   to be created -- and can fail (return "NULL" with an exception
   set).  Try to port the code to use the new "PyUnicode_nBYTE_DATA()"
   macros or use "PyUnicode_WRITE()" or "PyUnicode_READ()".

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using the
   "PyUnicode_nBYTE_DATA()" family of macros.

int PyUnicode_IsIdentifier(PyObject *unicode)
    * Part of the 안정 ABI.*

   언어 정의에 따라 문자열이 유효한 식별자이면 "1"을 반환합니다, 섹션
   식별자와 키워드. 그렇지 않으면 "0"을 반환합니다.

   버전 3.9에서 변경: 문자열이 준비(ready)되지 않았을 때, 이 함수는 더
   는 "Py_FatalError()"를 호출하지 않습니다.


유니코드 문자 속성
------------------

유니코드는 다양한 문자 속성을 제공합니다. 가장 자주 필요한 것은 파이썬
구성에 따라 C 함수에 매핑되는 이러한 매크로를 통해 사용할 수 있습니다.

int Py_UNICODE_ISSPACE(Py_UCS4 ch)

   *ch*가 공백 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISLOWER(Py_UCS4 ch)

   *ch*가 소문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISUPPER(Py_UCS4 ch)

   *ch*가 대문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISTITLE(Py_UCS4 ch)

   *ch*가 제목 케이스 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISLINEBREAK(Py_UCS4 ch)

   *ch*가 줄 바꿈 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISDECIMAL(Py_UCS4 ch)

   *ch*가 10진수 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISDIGIT(Py_UCS4 ch)

   *ch*가 디짓(digit) 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISNUMERIC(Py_UCS4 ch)

   *ch*가 숫자(numeric) 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISALPHA(Py_UCS4 ch)

   *ch*가 알파벳 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISALNUM(Py_UCS4 ch)

   *ch*가 영숫자 문자인지에 따라 "1"이나 "0"을 반환합니다.

int Py_UNICODE_ISPRINTABLE(Py_UCS4 ch)

   Return "1" or "0" depending on whether *ch* is a printable
   character. Nonprintable characters are those characters defined in
   the Unicode character database as "Other" or "Separator", excepting
   the ASCII space (0x20) which is considered printable.  (Note that
   printable characters in this context are those which should not be
   escaped when "repr()" is invoked on a string. It has no bearing on
   the handling of strings written to "sys.stdout" or "sys.stderr".)

다음 API는 빠른 직접 문자 변환에 사용할 수 있습니다:

Py_UCS4 Py_UNICODE_TOLOWER(Py_UCS4 ch)

   소문자로 변환된 문자 *ch*를 반환합니다.

   버전 3.3부터 폐지됨: This function uses simple case mappings.

Py_UCS4 Py_UNICODE_TOUPPER(Py_UCS4 ch)

   대문자로 변환된 문자 *ch*를 반환합니다.

   버전 3.3부터 폐지됨: This function uses simple case mappings.

Py_UCS4 Py_UNICODE_TOTITLE(Py_UCS4 ch)

   제목 케이스로 변환된 문자 *ch*를 반환합니다.

   버전 3.3부터 폐지됨: This function uses simple case mappings.

int Py_UNICODE_TODECIMAL(Py_UCS4 ch)

   Return the character *ch* converted to a decimal positive integer.
   Return "-1" if this is not possible.  This macro does not raise
   exceptions.

int Py_UNICODE_TODIGIT(Py_UCS4 ch)

   Return the character *ch* converted to a single digit integer.
   Return "-1" if this is not possible.  This macro does not raise
   exceptions.

double Py_UNICODE_TONUMERIC(Py_UCS4 ch)

   Return the character *ch* converted to a double. Return "-1.0" if
   this is not possible.  This macro does not raise exceptions.

다음 API를 사용하여 서로게이트를 다룰 수 있습니다:

Py_UNICODE_IS_SURROGATE(ch)

   *ch*가 서로게이트인지 확인합니다 ("0xD800 <= ch <= 0xDFFF").

Py_UNICODE_IS_HIGH_SURROGATE(ch)

   *ch*가 상위 서로게이트인지 확인합니다 ("0xD800 <= ch <= 0xDBFF").

Py_UNICODE_IS_LOW_SURROGATE(ch)

   *ch*가 하위 서로게이트인지 확인합니다 ("0xDC00 <= ch <= 0xDFFF").

Py_UNICODE_JOIN_SURROGATES(high, low)

   Join two surrogate characters and return a single Py_UCS4 value.
   *high* and *low* are respectively the leading and trailing
   surrogates in a surrogate pair.


유니코드 문자열 생성과 액세스
-----------------------------

유니코드 객체를 만들고 기본 시퀀스 속성에 액세스하려면 다음 API를 사용
하십시오:

PyObject *PyUnicode_New(Py_ssize_t size, Py_UCS4 maxchar)
    *반환값: 새 참조.*

   새 유니코드 객체를 만듭니다. *maxchar*은 문자열에 배치할 실제 최대
   코드 포인트여야 합니다. 근삿값으로, 127, 255, 65535, 1114111 시퀀스
   에서 가장 가까운 값으로 올림 할 수 있습니다.

   이것은 새 유니코드 객체를 할당하는 데 권장되는 방법입니다. 이 함수
   를 사용하여 만든 객체는 크기를 조정할 수 없습니다.

   버전 3.3에 추가.

PyObject *PyUnicode_FromKindAndData(int kind, const void *buffer, Py_ssize_t size)
    *반환값: 새 참조.*

   주어진 *kind*(가능한 값은 "PyUnicode_KIND()"에 의해 반환된
   "PyUnicode_1BYTE_KIND" 등입니다)로 새로운 유니코드 객체를 만듭니다.
   *buffer*는 kind에 따라 문자 당 1, 2 또는 4바이트의 *size* 단위의 배
   열을 가리켜야 합니다.

   If necessary, the input *buffer* is copied and transformed into the
   canonical representation.  For example, if the *buffer* is a UCS4
   string ("PyUnicode_4BYTE_KIND") and it consists only of codepoints
   in the UCS1 range, it will be transformed into UCS1
   ("PyUnicode_1BYTE_KIND").

   버전 3.3에 추가.

PyObject *PyUnicode_FromStringAndSize(const char *str, Py_ssize_t size)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object from the char buffer *str*.  The bytes will
   be interpreted as being UTF-8 encoded.  The buffer is copied into
   the new object. If the buffer is not "NULL", the return value might
   be a shared object, i.e. modification of the data is not allowed.

   If *str* is "NULL", this function behaves like
   "PyUnicode_FromUnicode()" with the buffer set to "NULL".  This
   usage is deprecated in favor of "PyUnicode_New()", and will be
   removed in Python 3.12.

PyObject *PyUnicode_FromString(const char *str)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object from a UTF-8 encoded null-terminated char
   buffer *str*.

PyObject *PyUnicode_FromFormat(const char *format, ...)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Take a C "printf()"-style *format* string and a variable number of
   arguments, calculate the size of the resulting Python Unicode
   string and return a string with the values formatted into it.  The
   variable arguments must be C types and must correspond exactly to
   the format characters in the *format* ASCII-encoded string. The
   following format characters are allowed:

   +---------------------+-----------------------+------------------------------------+
   | Format Characters   | 형                    | 주석                               |
   |=====================|=======================|====================================|
   | "%%"                | *n/a*                 | The literal % character.           |
   +---------------------+-----------------------+------------------------------------+
   | "%c"                | int                   | A single character, represented as |
   |                     |                       | a C int.                           |
   +---------------------+-----------------------+------------------------------------+
   | "%d"                | int                   | Equivalent to "printf("%d")". [1]  |
   +---------------------+-----------------------+------------------------------------+
   | "%u"                | unsigned int          | Equivalent to "printf("%u")". [1]  |
   +---------------------+-----------------------+------------------------------------+
   | "%ld"               | long                  | Equivalent to "printf("%ld")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%li"               | long                  | Equivalent to "printf("%li")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%lu"               | unsigned long         | Equivalent to "printf("%lu")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%lld"              | long long             | Equivalent to "printf("%lld")".    |
   |                     |                       | [1]                                |
   +---------------------+-----------------------+------------------------------------+
   | "%lli"              | long long             | Equivalent to "printf("%lli")".    |
   |                     |                       | [1]                                |
   +---------------------+-----------------------+------------------------------------+
   | "%llu"              | unsigned long long    | Equivalent to "printf("%llu")".    |
   |                     |                       | [1]                                |
   +---------------------+-----------------------+------------------------------------+
   | "%zd"               | "Py_ssize_t"          | Equivalent to "printf("%zd")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%zi"               | "Py_ssize_t"          | Equivalent to "printf("%zi")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%zu"               | size_t                | Equivalent to "printf("%zu")". [1] |
   +---------------------+-----------------------+------------------------------------+
   | "%i"                | int                   | Equivalent to "printf("%i")". [1]  |
   +---------------------+-----------------------+------------------------------------+
   | "%x"                | int                   | Equivalent to "printf("%x")". [1]  |
   +---------------------+-----------------------+------------------------------------+
   | "%s"                | const char*           | 널-종료 C 문자 배열.               |
   +---------------------+-----------------------+------------------------------------+
   | "%p"                | const void*           | The hex representation of a C      |
   |                     |                       | pointer. Mostly equivalent to      |
   |                     |                       | "printf("%p")" except that it is   |
   |                     |                       | guaranteed to start with the       |
   |                     |                       | literal "0x" regardless of what    |
   |                     |                       | the platform's "printf" yields.    |
   +---------------------+-----------------------+------------------------------------+
   | "%A"                | PyObject*             | "ascii()"를 호출한 결과.           |
   +---------------------+-----------------------+------------------------------------+
   | "%U"                | PyObject*             | 유니코드 객체.                     |
   +---------------------+-----------------------+------------------------------------+
   | "%V"                | PyObject*, const      | 유니코드 객체("NULL"일 수 있습니다 |
   |                     | char*                 | )와 두 번째 매개 변수로서 널-종료  |
   |                     |                       | C 문자 배열 (첫 번째 매개 변수가   |
   |                     |                       | "NULL"이면 사용됩니다).            |
   +---------------------+-----------------------+------------------------------------+
   | "%S"                | PyObject*             | "PyObject_Str()"을 호출한 결과.    |
   +---------------------+-----------------------+------------------------------------+
   | "%R"                | PyObject*             | "PyObject_Repr()"을 호출한 결과.   |
   +---------------------+-----------------------+------------------------------------+

   An unrecognized format character causes all the rest of the format
   string to be copied as-is to the result string, and any extra
   arguments discarded.

   참고:

     The width formatter unit is number of characters rather than
     bytes. The precision formatter unit is number of bytes for ""%s""
     and ""%V"" (if the "PyObject*" argument is "NULL"), and a number
     of characters for ""%A"", ""%U"", ""%S"", ""%R"" and ""%V"" (if
     the "PyObject*" argument is not "NULL").

   [1] For integer specifiers (d, u, ld, li, lu, lld, lli, llu, zd,
       zi, zu, i, x): the 0-conversion flag has effect even when a
       precision is given.

   버전 3.2에서 변경: ""%lld""와 ""%llu""에 대한 지원이 추가되었습니다
   .

   버전 3.3에서 변경: ""%li"", ""%lli"" 및 ""%zi""에 대한 지원이 추가
   되었습니다.

   버전 3.4에서 변경: ""%s"", ""%A"", ""%U"", ""%V"", ""%S"", ""%R""에
   대한 너비와 정밀도 포매터 지원이 추가되었습니다.

PyObject *PyUnicode_FromFormatV(const char *format, va_list vargs)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   정확히 두 개의 인자를 취한다는 점을 제외하면
   "PyUnicode_FromFormat()"과 동일합니다.

PyObject *PyUnicode_FromObject(PyObject *obj)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Copy an instance of a Unicode subtype to a new true Unicode object
   if necessary. If *obj* is already a true Unicode object (not a
   subtype), return a new *strong reference* to the object.

   유니코드나 이의 서브 형 이외의 객체는 "TypeError"를 발생시킵니다.

PyObject *PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   인코딩된 객체 *obj*를 유니코드 객체로 디코딩합니다.

   "bytes", "bytearray" 및 기타 *바이트열류 객체*는 주어진 *encoding*
   에 따라 *errors*로 정의한 에러 처리를 사용하여 디코딩됩니다. 둘 다
   "NULL"이 될 수 있고, 이 경우 인터페이스는 기본값을 사용합니다 (자세
   한 내용은 내장 코덱를 참조하십시오).

   유니코드 객체를 포함한 다른 모든 객체는 "TypeError"가 설정되도록 합
   니다.

   API는 에러가 있으면 "NULL"을 반환합니다. 호출자는 반환된 객체의 참
   조 횟수를 감소시킬 책임이 있습니다.

Py_ssize_t PyUnicode_GetLength(PyObject *unicode)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   유니코드 객체의 길이를 코드 포인트로 반환합니다.

   버전 3.3에 추가.

Py_ssize_t PyUnicode_CopyCharacters(PyObject *to, Py_ssize_t to_start, PyObject *from, Py_ssize_t from_start, Py_ssize_t how_many)

   Copy characters from one Unicode object into another.  This
   function performs character conversion when necessary and falls
   back to "memcpy()" if possible.  Returns "-1" and sets an exception
   on error, otherwise returns the number of copied characters.

   버전 3.3에 추가.

Py_ssize_t PyUnicode_Fill(PyObject *unicode, Py_ssize_t start, Py_ssize_t length, Py_UCS4 fill_char)

   문자로 문자열을 채웁니다: *fill_char*을
   "unicode[start:start+length]"에 씁니다.

   *fill_char*이 문자열 최대 문자보다 크거나, 문자열에 둘 이상의 참조
   가 있으면 실패합니다.

   기록된 문자 수를 반환하거나, 에러 시 "-1"을 반환하고 예외를 발생시
   킵니다.

   버전 3.3에 추가.

int PyUnicode_WriteChar(PyObject *unicode, Py_ssize_t index, Py_UCS4 character)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   문자열에 문자를 씁니다. 문자열은 "PyUnicode_New()"를 통해 만들었어
   야 합니다. 유니코드 문자열은 불변이므로, 문자열을 공유하거나 아직
   해시 하지 않아야 합니다.

   이 함수는 *unicode*가 유니코드 객체인지, 인덱스가 범위를 벗어났는지
   , 객체가 안전하게 수정될 수 있는지 (즉, 참조 횟수가 1인지) 확인합니
   다.

   버전 3.3에 추가.

Py_UCS4 PyUnicode_ReadChar(PyObject *unicode, Py_ssize_t index)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   Read a character from a string.  This function checks that
   *unicode* is a Unicode object and the index is not out of bounds,
   in contrast to "PyUnicode_READ_CHAR()", which performs no error
   checking.

   버전 3.3에 추가.

PyObject *PyUnicode_Substring(PyObject *unicode, Py_ssize_t start, Py_ssize_t end)
    *반환값: 새 참조.** Part of the 안정 ABI 버전 3.7 이후로.*

   Return a substring of *unicode*, from character index *start*
   (included) to character index *end* (excluded).  Negative indices
   are not supported.

   버전 3.3에 추가.

Py_UCS4 *PyUnicode_AsUCS4(PyObject *unicode, Py_UCS4 *buffer, Py_ssize_t buflen, int copy_null)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   Copy the string *unicode* into a UCS4 buffer, including a null
   character, if *copy_null* is set.  Returns "NULL" and sets an
   exception on error (in particular, a "SystemError" if *buflen* is
   smaller than the length of *unicode*).  *buffer* is returned on
   success.

   버전 3.3에 추가.

Py_UCS4 *PyUnicode_AsUCS4Copy(PyObject *unicode)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   Copy the string *unicode* into a new UCS4 buffer that is allocated
   using "PyMem_Malloc()".  If this fails, "NULL" is returned with a
   "MemoryError" set.  The returned buffer always has an extra null
   code point appended.

   버전 3.3에 추가.


Deprecated Py_UNICODE APIs
--------------------------

버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다..

These API functions are deprecated with the implementation of **PEP
393**. Extension modules can continue using them, as they will not be
removed in Python 3.x, but need to be aware that their use can now
cause performance and memory hits.

PyObject *PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size)
    *반환값: 새 참조.*

   Create a Unicode object from the Py_UNICODE buffer *u* of the given
   size. *u* may be "NULL" which causes the contents to be undefined.
   It is the user's responsibility to fill in the needed data.  The
   buffer is copied into the new object.

   If the buffer is not "NULL", the return value might be a shared
   object. Therefore, modification of the resulting Unicode object is
   only allowed when *u* is "NULL".

   If the buffer is "NULL", "PyUnicode_READY()" must be called once
   the string content has been filled before using any of the access
   macros such as "PyUnicode_KIND()".

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_FromKindAndData()", "PyUnicode_FromWideChar()", or
   "PyUnicode_New()".

Py_UNICODE *PyUnicode_AsUnicode(PyObject *unicode)

   Return a read-only pointer to the Unicode object's internal
   "Py_UNICODE" buffer, or "NULL" on error. This will create the
   Py_UNICODE* representation of the object if it is not yet
   available. The buffer is always terminated with an extra null code
   point. Note that the resulting "Py_UNICODE" string may also contain
   embedded null code points, which would cause the string to be
   truncated when used in most C functions.

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_AsUCS4()", "PyUnicode_AsWideChar()",
   "PyUnicode_ReadChar()" or similar new APIs.

Py_UNICODE *PyUnicode_AsUnicodeAndSize(PyObject *unicode, Py_ssize_t *size)

   Like "PyUnicode_AsUnicode()", but also saves the "Py_UNICODE()"
   array length (excluding the extra null terminator) in *size*. Note
   that the resulting Py_UNICODE* string may contain embedded null
   code points, which would cause the string to be truncated when used
   in most C functions.

   버전 3.3에 추가.

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_AsUCS4()", "PyUnicode_AsWideChar()",
   "PyUnicode_ReadChar()" or similar new APIs.

Py_ssize_t PyUnicode_GetSize(PyObject *unicode)
    * Part of the 안정 ABI.*

   Return the size of the deprecated "Py_UNICODE" representation, in
   code units (this includes surrogate pairs as 2 units).

   버전 3.3에서 폐지되었습니다, 버전 3.12에서 제거됩니다.: Part of the
   old-style Unicode API, please migrate to using
   "PyUnicode_GET_LENGTH()".


로케일 인코딩
-------------

현재 로케일 인코딩을 사용하여 운영 체제에서 온 텍스트를 디코딩 할 수
있습니다.

PyObject *PyUnicode_DecodeLocaleAndSize(const char *str, Py_ssize_t length, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI 버전 3.7 이후로.*

   안드로이드와 VxWorks의 UTF-8이나 다른 플랫폼의 현재 로케일 인코딩의
   문자열을 디코딩합니다. 지원되는 에러 처리기는 ""strict""와
   ""surrogateescape""(**PEP 383**)입니다. 디코더는 *errors*가 "NULL"
   이면 ""strict"" 에러 처리기를 사용합니다. *str*은 널 문자로 끝나야
   하지만 널 문자를 포함할 수 없습니다.

   Use "PyUnicode_DecodeFSDefaultAndSize()" to decode a string from
   "Py_FileSystemDefaultEncoding" (the locale encoding read at Python
   startup).

   This function ignores the Python UTF-8 Mode.

   더 보기: "Py_DecodeLocale()" 함수.

   버전 3.3에 추가.

   버전 3.7에서 변경: 이 함수는 이제 안드로이드를 제외하고
   "surrogateescape" 에러 처리기에 현재 로케일 인코딩도 사용합니다. 이
   전에는, "Py_DecodeLocale()"이 "surrogateescape"에 사용되었고, 현재
   로케일 인코딩은 "strict"에 사용되었습니다.

PyObject *PyUnicode_DecodeLocale(const char *str, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI 버전 3.7 이후로.*

   Similar to "PyUnicode_DecodeLocaleAndSize()", but compute the
   string length using "strlen()".

   버전 3.3에 추가.

PyObject *PyUnicode_EncodeLocale(PyObject *unicode, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI 버전 3.7 이후로.*

   유니코드 객체를 안드로이드와 VxWorks에서 UTF-8로 인코딩하거나, 다른
   플랫폼에서 현재 로케일 인코딩으로 인코딩합니다. 지원되는 에러 처리
   기는 ""strict""와 ""surrogateescape""(**PEP 383**)입니다. 인코더는
   *errors*가 "NULL"이면 ""strict"" 에러 처리기를 사용합니다. "bytes"
   객체를 반환합니다. *unicode*는 내장된 널 문자를 포함할 수 없습니다.

   Use "PyUnicode_EncodeFSDefault()" to encode a string to
   "Py_FileSystemDefaultEncoding" (the locale encoding read at Python
   startup).

   This function ignores the Python UTF-8 Mode.

   더 보기: "Py_EncodeLocale()" 함수.

   버전 3.3에 추가.

   버전 3.7에서 변경: 이 함수는 이제 안드로이드를 제외하고
   "surrogateescape" 에러 처리기에 현재 로케일 인코딩도 사용합니다. 이
   전에는 "Py_EncodeLocale()"이 "surrogateescape"에 사용되었고, 현재
   로케일 인코딩은 "strict"에 사용되었습니다.


파일 시스템 인코딩
------------------

To encode and decode file names and other environment strings,
"Py_FileSystemDefaultEncoding" should be used as the encoding, and
"Py_FileSystemDefaultEncodeErrors" should be used as the error handler
(**PEP 383** and **PEP 529**). To encode file names to "bytes" during
argument parsing, the ""O&"" converter should be used, passing
"PyUnicode_FSConverter()" as the conversion function:

int PyUnicode_FSConverter(PyObject *obj, void *result)
    * Part of the 안정 ABI.*

   ParseTuple converter: encode "str" objects -- obtained directly or
   through the "os.PathLike" interface -- to "bytes" using
   "PyUnicode_EncodeFSDefault()"; "bytes" objects are output as-is.
   *result* must be a PyBytesObject* which must be released when it is
   no longer used.

   버전 3.1에 추가.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

To decode file names to "str" during argument parsing, the ""O&""
converter should be used, passing "PyUnicode_FSDecoder()" as the
conversion function:

int PyUnicode_FSDecoder(PyObject *obj, void *result)
    * Part of the 안정 ABI.*

   ParseTuple converter: decode "bytes" objects -- obtained either
   directly or indirectly through the "os.PathLike" interface -- to
   "str" using "PyUnicode_DecodeFSDefaultAndSize()"; "str" objects are
   output as-is. *result* must be a PyUnicodeObject* which must be
   released when it is no longer used.

   버전 3.2에 추가.

   버전 3.6에서 변경: *경로류 객체*를 받아들입니다.

PyObject *PyUnicode_DecodeFSDefaultAndSize(const char *str, Py_ssize_t size)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Decode a string from the *filesystem encoding and error handler*.

   If "Py_FileSystemDefaultEncoding" is not set, fall back to the
   locale encoding.

   "Py_FileSystemDefaultEncoding" is initialized at startup from the
   locale encoding and cannot be modified later. If you need to decode
   a string from the current locale encoding, use
   "PyUnicode_DecodeLocaleAndSize()".

   더 보기: "Py_DecodeLocale()" 함수.

   버전 3.6에서 변경: Use "Py_FileSystemDefaultEncodeErrors" error
   handler.

PyObject *PyUnicode_DecodeFSDefault(const char *str)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Decode a null-terminated string from the *filesystem encoding and
   error handler*.

   If "Py_FileSystemDefaultEncoding" is not set, fall back to the
   locale encoding.

   Use "PyUnicode_DecodeFSDefaultAndSize()" if you know the string
   length.

   버전 3.6에서 변경: Use "Py_FileSystemDefaultEncodeErrors" error
   handler.

PyObject *PyUnicode_EncodeFSDefault(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Encode a Unicode object to "Py_FileSystemDefaultEncoding" with the
   "Py_FileSystemDefaultEncodeErrors" error handler, and return
   "bytes". Note that the resulting "bytes" object may contain null
   bytes.

   If "Py_FileSystemDefaultEncoding" is not set, fall back to the
   locale encoding.

   "Py_FileSystemDefaultEncoding" is initialized at startup from the
   locale encoding and cannot be modified later. If you need to encode
   a string to the current locale encoding, use
   "PyUnicode_EncodeLocale()".

   더 보기: "Py_EncodeLocale()" 함수.

   버전 3.2에 추가.

   버전 3.6에서 변경: Use "Py_FileSystemDefaultEncodeErrors" error
   handler.


wchar_t 지원
------------

지원하는 플랫폼에 대한 "wchar_t" 지원:

PyObject *PyUnicode_FromWideChar(const wchar_t *wstr, Py_ssize_t size)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object from the "wchar_t" buffer *wstr* of the
   given *size*. Passing "-1" as the *size* indicates that the
   function must itself compute the length, using "wcslen()". Return
   "NULL" on failure.

Py_ssize_t PyUnicode_AsWideChar(PyObject *unicode, wchar_t *wstr, Py_ssize_t size)
    * Part of the 안정 ABI.*

   Copy the Unicode object contents into the "wchar_t" buffer *wstr*.
   At most *size* "wchar_t" characters are copied (excluding a
   possibly trailing null termination character).  Return the number
   of "wchar_t" characters copied or "-1" in case of an error.

   When *wstr* is "NULL", instead return the *size* that would be
   required to store all of *unicode* including a terminating null.

   Note that the resulting wchar_t* string may or may not be null-
   terminated.  It is the responsibility of the caller to make sure
   that the wchar_t* string is null-terminated in case this is
   required by the application. Also, note that the wchar_t* string
   might contain null characters, which would cause the string to be
   truncated when used with most C functions.

wchar_t *PyUnicode_AsWideCharString(PyObject *unicode, Py_ssize_t *size)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   Convert the Unicode object to a wide character string. The output
   string always ends with a null character. If *size* is not "NULL",
   write the number of wide characters (excluding the trailing null
   termination character) into **size*. Note that the resulting
   "wchar_t" string might contain null characters, which would cause
   the string to be truncated when used with most C functions. If
   *size* is "NULL" and the wchar_t* string contains null characters a
   "ValueError" is raised.

   Returns a buffer allocated by "PyMem_New" (use "PyMem_Free()" to
   free it) on success. On error, returns "NULL" and **size* is
   undefined. Raises a "MemoryError" if memory allocation is failed.

   버전 3.2에 추가.

   버전 3.7에서 변경: Raises a "ValueError" if *size* is "NULL" and
   the wchar_t* string contains null characters.


내장 코덱
=========

파이썬은 속도를 위해 C로 작성된 내장 코덱 집합을 제공합니다. 이러한 코
덱들은 모두 다음 함수들을 통해 직접 사용할 수 있습니다.

다음 API의 대부분은 두 개의 인자 encoding과 errors를 취하며, 내장
"str()" 문자열 객체 생성자의 것들과 같은 의미입니다.

Setting encoding to "NULL" causes the default encoding to be used
which is UTF-8.  The file system calls should use
"PyUnicode_FSConverter()" for encoding file names. This uses the
variable "Py_FileSystemDefaultEncoding" internally. This variable
should be treated as read-only: on some systems, it will be a pointer
to a static string, on others, it will change at run-time (such as
when the application invokes setlocale).

에러 처리는 errors로 설정되는데, 코덱에 대해 정의된 기본 처리를 사용함
을 의미하는 "NULL"로 설정될 수도 있습니다. 모든 내장 코덱에 대한 기본
에러 처리는 "strict" 입니다 ("ValueError"가 발생합니다).

The codecs all use a similar interface.  Only deviations from the
following generic ones are documented for simplicity.


일반 코덱
---------

다음은 일반 코덱 API입니다:

PyObject *PyUnicode_Decode(const char *str, Py_ssize_t size, const char *encoding, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the encoded
   string *str*. *encoding* and *errors* have the same meaning as the
   parameters of the same name in the "str()" built-in function.  The
   codec to be used is looked up using the Python codec registry.
   Return "NULL" if an exception was raised by the codec.

PyObject *PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   유니코드 객체를 인코딩하고 결과를 파이썬 bytes 객체로 반환합니다.
   *encoding*과 *errors*는 유니코드 "encode()" 메서드의 같은 이름의 매
   개 변수와 같은 의미입니다. 사용할 코덱은 파이썬 코덱 레지스트리를
   사용하여 조회됩니다. 코덱에서 예외가 발생하면 "NULL"을 반환합니다.


UTF-8 코덱
----------

다음은 UTF-8 코덱 API입니다:

PyObject *PyUnicode_DecodeUTF8(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the UTF-8
   encoded string *str*. Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeUTF8Stateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   *consumed*가 "NULL"이면, "PyUnicode_DecodeUTF8()"처럼 동작합니다.
   *consumed*가 "NULL"이 아니면, 후행 불완전한 UTF-8 바이트 시퀀스는
   에러로 처리되지 않습니다. 이러한 바이트는 디코딩되지 않으며 디코딩
   된 바이트 수는 *consumed*에 저장됩니다.

PyObject *PyUnicode_AsUTF8String(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   UTF-8을 사용하여 유니코드 객체를 인코딩하고 결과를 파이썬 bytes 객
   체로 반환합니다. 에러 처리는 "strict" 입니다. 코덱에서 예외가 발생
   하면 "NULL"을 반환합니다.

const char *PyUnicode_AsUTF8AndSize(PyObject *unicode, Py_ssize_t *size)
    * Part of the 안정 ABI 버전 3.10 이후로.*

   유니코드 객체의 UTF-8 인코딩에 대한 포인터를 반환하고, 인코딩된 표
   현의 크기를 (바이트 단위로) *size*에 저장합니다. *size* 인자는
   "NULL"일 수 있습니다; 이 경우 크기가 저장되지 않습니다. 반환된 버퍼
   에는 다른 널 코드 포인트가 있는지에 관계없이, 항상 추가 널 바이트가
   추가됩니다 (*size*에 포함되지 않습니다).

   In the case of an error, "NULL" is returned with an exception set
   and no *size* is stored.

   This caches the UTF-8 representation of the string in the Unicode
   object, and subsequent calls will return a pointer to the same
   buffer.  The caller is not responsible for deallocating the buffer.
   The buffer is deallocated and pointers to it become invalid when
   the Unicode object is garbage collected.

   버전 3.3에 추가.

   버전 3.7에서 변경: 반환형은 이제 "char *"가 아니라 "const char *"입
   니다.

   버전 3.10에서 변경: This function is a part of the limited API.

const char *PyUnicode_AsUTF8(PyObject *unicode)

   "PyUnicode_AsUTF8AndSize()"와 같지만, 크기를 저장하지 않습니다.

   버전 3.3에 추가.

   버전 3.7에서 변경: 반환형은 이제 "char *"가 아니라 "const char *"입
   니다.


UTF-32 코덱
-----------

다음은 UTF-32 코덱 API입니다:

PyObject *PyUnicode_DecodeUTF32(const char *str, Py_ssize_t size, const char *errors, int *byteorder)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   UTF-32로 인코딩된 버퍼 문자열에서 *size* 바이트를 디코딩하고 해당
   유니코드 객체를 반환합니다. *errors*("NULL"이 아니면)는 에러 처리를
   정의합니다. 기본값은 "strict"입니다.

   *byteorder*가 "NULL"이 아니면, 디코더는 지정된 바이트 순서를 사용하
   여 디코딩을 시작합니다:

      *byteorder == -1: little endian
      *byteorder == 0:  native order
      *byteorder == 1:  big endian

   "*byteorder"가 0이고, 입력 데이터의 처음 4바이트가 바이트 순서 표시
   (BOM)이면, 디코더가 이 바이트 순서로 전환되고 BOM은 결과 유니코드
   문자열에 복사되지 않습니다. "*byteorder"가 "-1"이나 "1"이면, 모든
   바이트 순서 표시가 출력에 복사됩니다.

   완료 후, **byteorder*는 입력 데이터의 끝에서 현재 바이트 순서로 설
   정됩니다.

   *byteorder*가 "NULL"이면, 코덱은 네이티브 순서 모드로 시작합니다.

   코덱에서 예외가 발생하면 "NULL"을 반환합니다.

PyObject *PyUnicode_DecodeUTF32Stateful(const char *str, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   *consumed*가 "NULL"이면, "PyUnicode_DecodeUTF32()"처럼 동작합니다.
   *consumed*가 "NULL"이 아니면, "PyUnicode_DecodeUTF32Stateful()" 은
   후행 불완전 UTF-32 바이트 시퀀스(가령 4로 나누어떨어지지 않는 바이
   트 수)를 에러로 처리하지 않습니다. 이러한 바이트는 디코딩되지 않으
   며 디코딩된 바이트 수는 *consumed*에 저장됩니다.

PyObject *PyUnicode_AsUTF32String(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   네이티브 바이트 순서로 UTF-32 인코딩을 사용하여 파이썬 바이트 문자
   열을 반환합니다. 문자열은 항상 BOM 마크로 시작합니다. 에러 처리는
   "strict"입니다. 코덱에서 예외가 발생하면 "NULL"을 반환합니다.


UTF-16 코덱
-----------

다음은 UTF-16 코덱 API입니다:

PyObject *PyUnicode_DecodeUTF16(const char *str, Py_ssize_t size, const char *errors, int *byteorder)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   UTF-16으로 인코딩된 버퍼 문자열에서 *size* 바이트를 디코딩하고 해당
   유니코드 객체를 반환합니다. *errors*("NULL"이 아니면)는 에러 처리를
   정의합니다. 기본값은 "strict"입니다.

   *byteorder*가 "NULL"이 아니면, 디코더는 지정된 바이트 순서를 사용하
   여 디코딩을 시작합니다:

      *byteorder == -1: little endian
      *byteorder == 0:  native order
      *byteorder == 1:  big endian

   "*byteorder"가 0이고, 입력 데이터의 처음 2바이트가 바이트 순서 표시
   (BOM)이면, 디코더는 이 바이트 순서로 전환되고 BOM은 결과 유니코드
   문자열에 복사되지 않습니다. "*byteorder"가 "-1"이나 "1"이면 모든 바
   이트 순서 표시가 출력에 복사됩니다 ("\ufeff"나 "\ufffe" 문자가 됩니
   다).

   After completion, "*byteorder" is set to the current byte order at
   the end of input data.

   *byteorder*가 "NULL"이면, 코덱은 네이티브 순서 모드로 시작합니다.

   코덱에서 예외가 발생하면 "NULL"을 반환합니다.

PyObject *PyUnicode_DecodeUTF16Stateful(const char *str, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   *consumed*가 "NULL"이면, "PyUnicode_DecodeUTF16()"처럼 동작합니다.
   *consumed*가 "NULL"이 아니면, "PyUnicode_DecodeUTF16Stateful()" 은
   후행 불완전 UTF-16 바이트 시퀀스(가령 홀수 바이트 수나 분할 서로게
   이트 쌍)를 에러로 처리하지 않습니다. 이러한 바이트는 디코딩되지 않
   으며 디코딩된 바이트 수는 *consumed*에 저장됩니다.

PyObject *PyUnicode_AsUTF16String(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   네이티브 바이트 순서로 UTF-16 인코딩을 사용하여 파이썬 바이트 문자
   열을 반환합니다. 문자열은 항상 BOM 마크로 시작합니다. 에러 처리는
   "strict"입니다. 코덱에서 예외가 발생하면 "NULL"을 반환합니다.


UTF-7 코덱
----------

다음은 UTF-7 코덱 API입니다:

PyObject *PyUnicode_DecodeUTF7(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the UTF-7
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeUTF7Stateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   *consumed*가 "NULL"이면, "PyUnicode_DecodeUTF7()"처럼 동작합니다.
   *consumed*가 "NULL"이 아니면, 후행 불완전한 UTF-7 base-64 섹션은 에
   러로 처리되지 않습니다. 이러한 바이트는 디코딩되지 않으며 디코딩된
   바이트 수는 *consumed*에 저장됩니다.


유니코드 이스케이프 코덱
------------------------

다음은 "유니코드 이스케이프(Unicode Escape)" 코덱 API입니다:

PyObject *PyUnicode_DecodeUnicodeEscape(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the Unicode-
   Escape encoded string *str*.  Return "NULL" if an exception was
   raised by the codec.

PyObject *PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   유니코드 이스케이프를 사용하여 유니코드 객체를 인코딩하고 결과를
   bytes 객체로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예외
   가 발생하면 "NULL"을 반환합니다.


원시 유니코드 이스케이프 코덱
-----------------------------

다음은 "원시 유니코드 이스케이프(Raw Unicode Escape)" 코덱 API입니다:

PyObject *PyUnicode_DecodeRawUnicodeEscape(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the Raw-
   Unicode-Escape encoded string *str*.  Return "NULL" if an exception
   was raised by the codec.

PyObject *PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   원시 유니코드 이스케이프를 사용하여 유니코드 객체를 인코딩하고 결과
   를 bytes 객체로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예
   외가 발생하면 "NULL"을 반환합니다.


Latin-1 코덱
------------

다음은 Latin-1 코덱 API입니다: Latin-1은 처음 256개의 유니코드 서수에
해당하며 인코딩 중에 코덱에서 이들만 허용됩니다.

PyObject *PyUnicode_DecodeLatin1(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the Latin-1
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_AsLatin1String(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Latin-1을 사용하여 유니코드 객체를 인코딩하고 결과를 파이썬 bytes
   객체로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예외가 발생
   하면 "NULL"을 반환합니다.


ASCII 코덱
----------

다음은 ASCII 코덱 API입니다. 7비트 ASCII 데이터만 허용됩니다. 다른 모
든 코드는 에러를 생성합니다.

PyObject *PyUnicode_DecodeASCII(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the ASCII
   encoded string *str*.  Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_AsASCIIString(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   ASCII를 사용하여 유니코드 객체를 인코딩하고 결과를 파이썬 bytes 객
   체로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예외가 발생하
   면 "NULL"을 반환합니다.


문자 맵 코덱
------------

This codec is special in that it can be used to implement many
different codecs (and this is in fact what was done to obtain most of
the standard codecs included in the "encodings" package). The codec
uses mappings to encode and decode characters.  The mapping objects
provided must support the "__getitem__()" mapping interface;
dictionaries and sequences work well.

다음은 매핑 코덱 API입니다:

PyObject *PyUnicode_DecodeCharmap(const char *str, Py_ssize_t length, PyObject *mapping, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Create a Unicode object by decoding *size* bytes of the encoded
   string *str* using the given *mapping* object.  Return "NULL" if an
   exception was raised by the codec.

   *mapping*이 "NULL"이면, Latin-1 디코딩이 적용됩니다. 그렇지 않으면
   *mapping*은 바이트 서수(0에서 255 사이의 정수)를 유니코드 문자열,
   정수(유니코드 서수로 해석됩니다) 또는 "None"으로 매핑해야합니다. 매
   핑되지 않은 데이터 바이트("None", "0xFFFE" 또는 "'\ufffe'"로 매핑되
   는 것뿐만 아니라, "LookupError"를 유발하는 것)은 정의되지 않은 매핑
   으로 처리되어 에러를 발생시킵니다.

PyObject *PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   주어진 *mapping* 객체를 사용하여 유니코드 객체를 인코딩하고 결과를
   bytes 객체로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예외
   가 발생하면 "NULL"을 반환합니다.

   *mapping* 객체는 유니코드 서수 정수를 bytes 객체, 0에서 255 사이의
   정수 또는 "None"으로 매핑해야 합니다. "None"에 매핑되는 것뿐만 아니
   라 매핑되지 않은 문자 서수("LookupError"를 유발하는 것)는 "정의되지
   않은 매핑"으로 처리되어 에러가 발생합니다.

다음 코덱 API는 유니코드를 유니코드로 매핑한다는 점에서 특별합니다.

PyObject *PyUnicode_Translate(PyObject *unicode, PyObject *table, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   문자 매핑 테이블을 적용하여 문자열을 변환하고 결과 유니코드 객체를
   반환합니다. 코덱에서 예외가 발생하면 "NULL"을 반환합니다.

   매핑 테이블은 유니코드 서수 정수를 유니코드 서수 정수나 "None"(문자
   가 삭제되도록 합니다)에 매핑해야 합니다.

   Mapping tables need only provide the "__getitem__()" interface;
   dictionaries and sequences work well.  Unmapped character ordinals
   (ones which cause a "LookupError") are left untouched and are
   copied as-is.

   *errors*는 코덱에서의 일반적인 의미입니다. 기본 에러 처리를 사용함
   을 나타내는 "NULL"일 수 있습니다.


윈도우 용 MBCS 코덱
-------------------

다음은 MBCS 코덱 API입니다. 현재 윈도우에서만 사용할 수 있으며 Win32
MBCS 변환기를 사용하여 변환을 구현합니다. MBCS(또는 DBCS)는 단지 하나
가 아니라 인코딩 클래스임에 유의하십시오. 대상 인코딩은 코덱을 실행하
는 기계의 사용자 설정에 의해 정의됩니다.

PyObject *PyUnicode_DecodeMBCS(const char *str, Py_ssize_t size, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI on Windows 버전 3.7 이후
   로.*

   Create a Unicode object by decoding *size* bytes of the MBCS
   encoded string *str*. Return "NULL" if an exception was raised by
   the codec.

PyObject *PyUnicode_DecodeMBCSStateful(const char *str, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
    *반환값: 새 참조.** Part of the 안정 ABI on Windows 버전 3.7 이후
   로.*

   *consumed*가 "NULL"이면, "PyUnicode_DecodeMBCS()"처럼 동작합니다.
   *consumed*가 "NULL"이 아니면, "PyUnicode_DecodeMBCSStateful()" 은
   후행 선행(lead) 바이트를 디코딩하지 않고 디코딩된 바이트 수가
   *consumed*에 저장됩니다.

PyObject *PyUnicode_AsMBCSString(PyObject *unicode)
    *반환값: 새 참조.** Part of the 안정 ABI on Windows 버전 3.7 이후
   로.*

   MBCS를 사용하여 유니코드 객체를 인코딩하고 결과를 파이썬 bytes 객체
   로 반환합니다. 에러 처리는 "strict"입니다. 코덱에서 예외가 발생하면
   "NULL"을 반환합니다.

PyObject *PyUnicode_EncodeCodePage(int code_page, PyObject *unicode, const char *errors)
    *반환값: 새 참조.** Part of the 안정 ABI on Windows 버전 3.7 이후
   로.*

   Encode the Unicode object using the specified code page and return
   a Python bytes object.  Return "NULL" if an exception was raised by
   the codec. Use "CP_ACP" code page to get the MBCS encoder.

   버전 3.3에 추가.


메서드와 슬롯
-------------


메서드와 슬롯 함수
==================

다음 API는 입력의 유니코드 객체와 문자열을 (설명에서 문자열이라고 하겠
습니다) 처리할 수 있으며 적절하게 유니코드 객체나 정수를 반환합니다.

예외가 발생하면 모두 "NULL"이나 "-1"을 반환합니다.

PyObject *PyUnicode_Concat(PyObject *left, PyObject *right)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   두 문자열을 이어붙여 하나의 새로운 유니코드 문자열을 제공합니다.

PyObject *PyUnicode_Split(PyObject *unicode, PyObject *sep, Py_ssize_t maxsplit)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   문자열을 분할하여 유니코드 문자열 리스트를 제공합니다. *sep*이
   "NULL"이면, 모든 공백 부분 문자열에서 분할이 수행됩니다. 그렇지 않
   으면, 주어진 구분자에서 분할이 일어납니다. 최대 *maxsplit* 분할이
   수행됩니다. 음수이면, 제한이 설정되지 않습니다. 구분자는 결과 리스
   트에 포함되지 않습니다.

PyObject *PyUnicode_Splitlines(PyObject *unicode, int keepends)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Split a Unicode string at line breaks, returning a list of Unicode
   strings. CRLF is considered to be one line break.  If *keepends* is
   "0", the Line break characters are not included in the resulting
   strings.

PyObject *PyUnicode_Join(PyObject *separator, PyObject *seq)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   주어진 *separator*를 사용하여 문자열 시퀀스를 연결하고 결과 유니코
   드 문자열을 반환합니다.

Py_ssize_t PyUnicode_Tailmatch(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
    * Part of the 안정 ABI.*

   Return "1" if *substr* matches "unicode[start:end]" at the given
   tail end (*direction* == "-1" means to do a prefix match,
   *direction* == "1" a suffix match), "0" otherwise. Return "-1" if
   an error occurred.

Py_ssize_t PyUnicode_Find(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end, int direction)
    * Part of the 안정 ABI.*

   Return the first position of *substr* in "unicode[start:end]" using
   the given *direction* (*direction* == "1" means to do a forward
   search, *direction* == "-1" a backward search).  The return value
   is the index of the first match; a value of "-1" indicates that no
   match was found, and "-2" indicates that an error occurred and an
   exception has been set.

Py_ssize_t PyUnicode_FindChar(PyObject *unicode, Py_UCS4 ch, Py_ssize_t start, Py_ssize_t end, int direction)
    * Part of the 안정 ABI 버전 3.7 이후로.*

   Return the first position of the character *ch* in
   "unicode[start:end]" using the given *direction* (*direction* ==
   "1" means to do a forward search, *direction* == "-1" a backward
   search).  The return value is the index of the first match; a value
   of "-1" indicates that no match was found, and "-2" indicates that
   an error occurred and an exception has been set.

   버전 3.3에 추가.

   버전 3.7에서 변경: *start* and *end* are now adjusted to behave
   like "unicode[start:end]".

Py_ssize_t PyUnicode_Count(PyObject *unicode, PyObject *substr, Py_ssize_t start, Py_ssize_t end)
    * Part of the 안정 ABI.*

   Return the number of non-overlapping occurrences of *substr* in
   "unicode[start:end]".  Return "-1" if an error occurred.

PyObject *PyUnicode_Replace(PyObject *unicode, PyObject *substr, PyObject *replstr, Py_ssize_t maxcount)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   Replace at most *maxcount* occurrences of *substr* in *unicode*
   with *replstr* and return the resulting Unicode object. *maxcount*
   == "-1" means replace all occurrences.

int PyUnicode_Compare(PyObject *left, PyObject *right)
    * Part of the 안정 ABI.*

   두 문자열을 비교하고 각각 작음, 같음, 큼에 대해 "-1", "0", "1"을 반
   환합니다.

   이 함수는 실패 시 "-1"을 반환하므로, 에러를 확인하기 위해
   "PyErr_Occurred()"를 호출해야 합니다.

int PyUnicode_CompareWithASCIIString(PyObject *unicode, const char *string)
    * Part of the 안정 ABI.*

   Compare a Unicode object, *unicode*, with *string* and return "-1",
   "0", "1" for less than, equal, and greater than, respectively. It
   is best to pass only ASCII-encoded strings, but the function
   interprets the input string as ISO-8859-1 if it contains non-ASCII
   characters.

   이 함수는 예외를 발생시키지 않습니다.

PyObject *PyUnicode_RichCompare(PyObject *left, PyObject *right, int op)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   두 유니코드 문자열을 풍부한 비교(rich comparison) 하고 다음 중 하나
   를 반환합니다:

   * 예외가 발생하면 "NULL"

   * "Py_True" or "Py_False" for successful comparisons

   * "Py_NotImplemented" in case the type combination is unknown

   Possible values for *op* are "Py_GT", "Py_GE", "Py_EQ", "Py_NE",
   "Py_LT", and "Py_LE".

PyObject *PyUnicode_Format(PyObject *format, PyObject *args)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   *format*과 *args*에서 새 문자열 객체를 반환합니다; 이것은 "format %
   args"와 유사합니다.

int PyUnicode_Contains(PyObject *unicode, PyObject *substr)
    * Part of the 안정 ABI.*

   Check whether *substr* is contained in *unicode* and return true or
   false accordingly.

   *substr* has to coerce to a one element Unicode string. "-1" is
   returned if there was an error.

void PyUnicode_InternInPlace(PyObject **p_unicode)
    * Part of the 안정 ABI.*

   Intern the argument *p_unicode in place.  The argument must be the
   address of a pointer variable pointing to a Python Unicode string
   object.  If there is an existing interned string that is the same
   as *p_unicode, it sets *p_unicode to it (releasing the reference to
   the old string object and creating a new *strong reference* to the
   interned string object), otherwise it leaves *p_unicode alone and
   interns it (creating a new *strong reference*). (Clarification:
   even though there is a lot of talk about references, think of this
   function as reference-neutral; you own the object after the call if
   and only if you owned it before the call.)

PyObject *PyUnicode_InternFromString(const char *str)
    *반환값: 새 참조.** Part of the 안정 ABI.*

   A combination of "PyUnicode_FromString()" and
   "PyUnicode_InternInPlace()", returning either a new Unicode string
   object that has been interned, or a new ("owned") reference to an
   earlier interned string object with the same value.
