"dis" --- 파이썬 바이트 코드 역 어셈블러
****************************************

**소스 코드:** Lib/dis.py

======================================================================

"dis" 모듈은 CPython *바이트 코드*를 역 어셈블 하여 분석을 지원합니다.
이 모듈이 입력으로 취하는 CPython 바이트 코드는 파일
"Include/opcode.h"에 정의되어 있으며 컴파일러와 인터프리터에서 사용됩
니다.

**CPython 구현 상세:** 바이트 코드는 CPython 인터프리터의 구현 세부 사
항입니다. 파이썬 버전 간에 바이트 코드가 추가, 제거 또는 변경되지 않을
것이라는 보장은 없습니다. 이 모듈을 사용하는 것이 파이썬 VM이나 파이썬
릴리스에 걸쳐 작동할 것으로 생각하지 말아야 합니다.

버전 3.6에서 변경: 명령어마다 2바이트를 사용합니다. 이전에는 바이트 수
가 명령어에 따라 달랐습니다.

버전 3.10에서 변경: The argument of jump, exception handling and loop
instructions is now the instruction offset rather than the byte
offset.

버전 3.11에서 변경: Some instructions are accompanied by one or more
inline cache entries, which take the form of "CACHE" instructions.
These instructions are hidden by default, but can be shown by passing
"show_caches=True" to any "dis" utility. Furthermore, the interpreter
now adapts the bytecode to specialize it for different runtime
conditions. The adaptive bytecode can be shown by passing
"adaptive=True".

예: 주어진 함수 "myfunc()"에 대해:

   def myfunc(alist):
       return len(alist)

the following command can be used to display the disassembly of
"myfunc()":

   >>> dis.dis(myfunc)
     2           0 RESUME                   0

     3           2 LOAD_GLOBAL              1 (NULL + len)
                14 LOAD_FAST                0 (alist)
                16 PRECALL                  1
                20 CALL                     1
                30 RETURN_VALUE

("2"는 줄 번호입니다).


Command-line interface
======================

The "dis" module can be invoked as a script from the command line:

   python -m dis [-h] [-C] [infile]

The following options are accepted:

-h, --help

   Display usage and exit.

-C, --show-caches

   Show inline caches.

If "infile" is specified, its disassembled code will be written to
stdout. Otherwise, disassembly is performed on compiled source code
recieved from stdin.


바이트 코드 분석
================

버전 3.4에 추가.

바이트 코드 분석 API는 컴파일된 코드의 세부 사항에 쉽게 액세스 할 수
있도록 하는 "Bytecode" 객체로 파이썬 코드 조각을 감쌀 수 있도록 합니다
.

class dis.Bytecode(x, *, first_line=None, current_offset=None, show_caches=False, adaptive=False)

   함수, 제너레이터, 비동기 제너레이터, 코루틴, 메서드, 소스 코드 문자
   열 또는 ("compile()"에서 반환된) 코드 객체에 해당하는 바이트 코드를
   분석합니다.

   이것은 아래에 나열된 많은 함수, 특히 "get_instructions()"를 둘러싼
   편리한 래퍼입니다, "Bytecode" 인스턴스를 이터레이트 하면 바이트 코
   드 연산이 "Instruction" 인스턴스로 산출되기 때문입니다.

   *first_line*이 "None"이 아니면, 역 어셈블 된 코드에서 첫 번째 소스
   줄에 대해 보고해야 하는 줄 번호를 나타냅니다. 그렇지 않으면, 소스
   줄 정보(있다면)를 역 어셈블 된 코드 객체에서 직접 취합니다.

   *current_offset*이 "None"이 아니면, 역 어셈블 된 코드의 명령어 오프
   셋을 나타냅니다. 이를 설정하면, "dis()"가 지정된 옵코드(opcode)에
   대해 "현재 명령어" 마커를 표시합니다.

   If *show_caches* is "True", "dis()" will display inline cache
   entries used by the interpreter to specialize the bytecode.

   If *adaptive* is "True", "dis()" will display specialized bytecode
   that may be different from the original bytecode.

   classmethod from_traceback(tb, *, show_caches=False)

      주어진 트레이스백에서 "Bytecode" 인스턴스를 구성하고,
      *current_offset*을 예외를 일으킨 명령어로 설정합니다.

   codeobj

      컴파일된 코드 객체.

   first_line

      코드 객체의 첫 번째 소스 줄 (사용 가능하다면)

   dis()

      바이트 코드 연산의 포맷된 보기를 반환합니다 ("dis.dis()"가 인쇄
      하는 것과 같지만, 여러 줄 문자열로 반환됩니다).

   info()

      "code_info()"처럼, 코드 객체에 대한 자세한 정보가 포함된 포맷된
      여러 줄 문자열을 반환합니다.

   버전 3.7에서 변경: 이제 코루틴과 비동기 제너레이터 객체를 처리할 수
   있습니다.

   버전 3.11에서 변경: Added the *show_caches* and *adaptive*
   parameters.

Example:

   >>> bytecode = dis.Bytecode(myfunc)
   >>> for instr in bytecode:
   ...     print(instr.opname)
   ...
   RESUME
   LOAD_GLOBAL
   LOAD_FAST
   PRECALL
   CALL
   RETURN_VALUE


분석 함수
=========

"dis" 모듈은 또한 입력을 원하는 출력으로 직접 변환하는 다음 분석 함수
를 정의합니다. 단일 작업만 수행해서, 중간 분석 객체가 유용하지 않을 때
유용할 수 있습니다:

dis.code_info(x)

   제공된 함수, 제너레이터, 비동기 제너레이터, 코루틴, 메서드, 소스 코
   드 문자열 또는 코드 객체에 대한 자세한 코드 객체 정보가 포함된 포맷
   된 여러 줄 문자열을 반환합니다.

   코드 정보 문자열의 정확한 내용은 구현에 따라 달라지며 파이썬 VM이나
   파이썬 릴리스에 걸쳐 임의로 변경될 수 있습니다.

   버전 3.2에 추가.

   버전 3.7에서 변경: 이제 코루틴과 비동기 제너레이터 객체를 처리할 수
   있습니다.

dis.show_code(x, *, file=None)

   제공된 함수, 메서드, 소스 코드 문자열 또는 코드 객체에 대한 자세한
   코드 객체 정보를 *file*(또는 *file*이 지정되지 않으면 "sys.stdout")
   로 인쇄합니다.

   이것은 "print(code_info(x), file=file)"의 편리한 축약 형으로, 인터
   프리터 프롬프트에서의 대화식 탐색을 위한 것입니다.

   버전 3.2에 추가.

   버전 3.4에서 변경: *file* 매개 변수를 추가했습니다.

dis.dis(x=None, *, file=None, depth=None, show_caches=False, adaptive=False)

   *x* 객체를 역 어셈블 합니다. *x*는 모듈, 클래스, 메서드, 함수, 제너
   레이터, 비동기 제너레이터, 코루틴, 코드 객체, 소스 코드 문자열 또는
   원시 바이트 코드의 바이트 시퀀스를 나타낼 수 있습니다. 모듈의 경우,
   모든 함수를 역 어셈블 합니다. 클래스의 경우, 모든 메서드(클래스와
   정적 메서드를 포함합니다)를 역 어셈블 합니다. 코드 객체나 원시 바이
   트 코드 시퀀스의 경우, 바이트 코드 명령어 당 한 줄을 인쇄합니다. 또
   한 중첩 코드 객체(컴프리헨션, 제너레이터 표현식 및 중첩 함수의 코드
   와 중첩 클래스를 만드는 데 사용된 코드)를 재귀적으로 역 어셈블 합니
   다. 문자열은 역 어셈블 되기 전에 먼저 "compile()" 내장 함수를 사용
   하여 코드 객체로 컴파일됩니다. 객체가 제공되지 않으면, 이 함수는 마
   지막 트레이스백을 역 어셈블 합니다.

   역 어셈블리는 제공된다면 제공된 *file* 인자에, 그렇지 않으면
   "sys.stdout"에 텍스트로 기록됩니다.

   재귀의 최대 깊이는 "None"이 아닌 한 *depth*에 의해 제한됩니다.
   "depth=0"은 재귀가 없음을 의미합니다.

   If *show_caches* is "True", this function will display inline cache
   entries used by the interpreter to specialize the bytecode.

   If *adaptive* is "True", this function will display specialized
   bytecode that may be different from the original bytecode.

   버전 3.4에서 변경: *file* 매개 변수를 추가했습니다.

   버전 3.7에서 변경: 재귀 역 어셈블을 구현하고 *depth* 매개 변수를 추
   가했습니다.

   버전 3.7에서 변경: 이제 코루틴과 비동기 제너레이터 객체를 처리할 수
   있습니다.

   버전 3.11에서 변경: Added the *show_caches* and *adaptive*
   parameters.

dis.distb(tb=None, *, file=None, show_caches=False, adaptive=False)

   트레이스백의 최상단 함수를 역 어셈블 합니다. 전달되지 않으면 마지막
   트레이스백을 사용합니다. 예외를 일으키는 명령어가 표시됩니다.

   역 어셈블리는 제공된다면 제공된 *file* 인자에, 그렇지 않으면
   "sys.stdout"에 텍스트로 기록됩니다.

   버전 3.4에서 변경: *file* 매개 변수를 추가했습니다.

   버전 3.11에서 변경: Added the *show_caches* and *adaptive*
   parameters.

dis.disassemble(code, lasti=-1, *, file=None, show_caches=False, adaptive=False)
dis.disco(code, lasti=-1, *, file=None, show_caches=False, adaptive=False)

   코드 객체를 역 어셈블 하고, *lasti*가 제공되면 마지막 명령어를 표시
   합니다. 출력은 다음 열로 나뉩니다:

   1. 줄 번호, 각 줄의 첫 번째 명령어에 표시됩니다

   2. 현재 명령어, "-->"로 표시됩니다,

   3. 레이블이 있는 명령어, ">>"로 표시됩니다,

   4. 명령어의 주소,

   5. 연산 코드 이름,

   6. 연산 매개 변수, 그리고

   7. 괄호 안에 있는 매개 변수의 해석.

   매개 변수 해석은 지역과 전역 변수 이름, 상숫값, 분기 대상 및 비교
   연산자를 인식합니다.

   역 어셈블리는 제공된다면 제공된 *file* 인자에, 그렇지 않으면
   "sys.stdout"에 텍스트로 기록됩니다.

   버전 3.4에서 변경: *file* 매개 변수를 추가했습니다.

   버전 3.11에서 변경: Added the *show_caches* and *adaptive*
   parameters.

dis.get_instructions(x, *, first_line=None, show_caches=False, adaptive=False)

   제공된 함수, 메서드, 소스 코드 문자열 또는 코드 객체의 명령어들에
   대한 이터레이터를 반환합니다.

   이터레이터는 제공된 코드의 각 연산에 대한 세부 정보를 제공하는
   "Instruction" 네임드 튜플의 연속을 생성합니다.

   *first_line*이 "None"이 아니면, 역 어셈블 된 코드에서 첫 번째 소스
   줄에 대해 보고해야 하는 줄 번호를 나타냅니다. 그렇지 않으면, 소스
   줄 정보(있다면)를 역 어셈블 된 코드 객체에서 직접 취합니다.

   The *show_caches* and *adaptive* parameters work as they do in
   "dis()".

   버전 3.4에 추가.

   버전 3.11에서 변경: Added the *show_caches* and *adaptive*
   parameters.

dis.findlinestarts(code)

   This generator function uses the "co_lines()" method of the code
   object *code* to find the offsets which are starts of lines in the
   source code.  They are generated as "(offset, lineno)" pairs.

   버전 3.6에서 변경: 줄 번호가 줄어들 수 있습니다. 전에는, 언제나 증
   가했습니다.

   버전 3.10에서 변경: The **PEP 626** "co_lines()" method is used
   instead of the "co_firstlineno" and "co_lnotab" attributes of the
   code object.

dis.findlabels(code)

   원시 컴파일된 바이트 코드 문자열 *code*에서 점프 대상인 모든 오프셋
   을 감지하고, 이러한 오프셋의 리스트를 반환합니다.

dis.stack_effect(opcode, oparg=None, *, jump=None)

   인자 *oparg*를 갖는 *opcode*의 스택 효과를 계산합니다.

   코드에 점프 대상이 있고 *jump*가 "True"이면, "stack_effect()"는 점
   프의 스택 효과를 반환합니다. *jump*가 "False"이면, 점프하지 않는 스
   택 효과를 반환합니다. *jump*가 "None"(기본값)이면, 두 경우의 최대
   스택 효과를 반환합니다.

   버전 3.4에 추가.

   버전 3.8에서 변경: *jump* 매개 변수를 추가했습니다.


파이썬 바이트 코드 명령어
=========================

"get_instructions()" 함수와 "Bytecode" 클래스는 바이트 코드 명령어의
세부 사항을 "Instruction" 인스턴스로 제공합니다:

class dis.Instruction

   바이트 코드 연산에 대한 세부 사항

   opcode

      연산의 숫자 코드, 아래 나열된 옵코드 값과 옵코드 모음에 있는 바
      이트 코드 값에 해당합니다.

   opname

      연산의 사람이 읽을 수 있는 이름

   arg

      연산에 대한 숫자 인자 (있다면), 그렇지 않으면 "None"

   argval

      resolved arg value (if any), otherwise "None"

   argrepr

      human readable description of operation argument (if any),
      otherwise an empty string.

   offset

      바이트 코드 시퀀스 내에서 연산의 시작 인덱스

   starts_line

      이 옵코드에 의해 시작된 줄 (있다면), 그렇지 않으면 "None"

   is_jump_target

      다른 코드가 여기로 점프하면 "True", 그렇지 않으면 "False"

   positions

      "dis.Positions" object holding the start and end locations that
      are covered by this instruction.

   버전 3.4에 추가.

   버전 3.11에서 변경: Field "positions" is added.

class dis.Positions

   In case the information is not available, some fields might be
   "None".

   lineno

   end_lineno

   col_offset

   end_col_offset

   버전 3.11에 추가.

파이썬 컴파일러는 현재 다음 바이트 코드 명령어를 생성합니다.

**일반 명령어**

NOP

   Do nothing code.  Used as a placeholder by the bytecode optimizer,
   and to generate line tracing events.

POP_TOP

   스택 최상단 (TOS) 항목을 제거합니다.

COPY(i)

   Push the *i*-th item to the top of the stack. The item is not
   removed from its original location.

   버전 3.11에 추가.

SWAP(i)

   Swap TOS with the item at position *i*.

   버전 3.11에 추가.

CACHE

   Rather than being an actual instruction, this opcode is used to
   mark extra space for the interpreter to cache useful data directly
   in the bytecode itself. It is automatically hidden by all "dis"
   utilities, but can be viewed with "show_caches=True".

   Logically, this space is part of the preceding instruction. Many
   opcodes expect to be followed by an exact number of caches, and
   will instruct the interpreter to skip over them at runtime.

   Populated caches can look like arbitrary instructions, so great
   care should be taken when reading or modifying raw, adaptive
   bytecode containing quickened data.

   버전 3.11에 추가.

**단항 연산**

단항 연산은 스택의 최상단을 취하고, 연산을 적용한 다음, 결과를 스택에
다시 푸시합니다.

UNARY_POSITIVE

   "TOS = +TOS"를 구현합니다.

UNARY_NEGATIVE

   "TOS = -TOS"를 구현합니다.

UNARY_NOT

   "TOS = not TOS"를 구현합니다.

UNARY_INVERT

   "TOS = ~TOS"를 구현합니다.

GET_ITER

   "TOS = iter(TOS)"를 구현합니다.

GET_YIELD_FROM_ITER

   "TOS"가 *제너레이터 이터레이터*나 *코루틴* 객체이면 그대로 둡니다.
   그렇지 않으면, "TOS = iter(TOS)"를 구현합니다.

   버전 3.5에 추가.

**Binary and in-place operations**

이항 연산은 스택에서 스택 최상단(TOS)과 두 번째 최상단 스택 항목(TOS1)
을 제거합니다. 연산을 수행하고, 결과를 다시 스택에 넣습니다.

제자리(in-place) 연산은 TOS와 TOS1을 제거하고, 스택에 결과를 다시 푸시
한다는 점에서 이항 연산과 같습니다. 그러나 TOS1이 이를 지원하면 연산이
제자리에서 수행되며, 결과 TOS는 원래 TOS1일 수 있습니다 (하지만 꼭 그
럴 필요는 없습니다).

BINARY_OP(op)

   Implements the binary and in-place operators (depending on the
   value of *op*).

   버전 3.11에 추가.

BINARY_SUBSCR

   "TOS = TOS1[TOS]"를 구현합니다.

STORE_SUBSCR

   "TOS1[TOS] = TOS2"를 구현합니다.

DELETE_SUBSCR

   "del TOS1[TOS]"를 구현합니다.

**코루틴 옵코드**

GET_AWAITABLE(where)

   "TOS = get_awaitable(TOS)"를 구현합니다. 여기서 "o"가 코루틴 객체나
   CO_ITERABLE_COROUTINE 플래그를 가진 제너레이터 객체이면
   "get_awaitable(o)"는 "o"를 반환합니다, 또는 "o.__await__"를 해석
   (resolve)합니다.

      If the "where" operand is nonzero, it indicates where the
      instruction occurs:

      * "1" After a call to "__aenter__"

      * "2" After a call to "__aexit__"

   버전 3.5에 추가.

   버전 3.11에서 변경: Previously, this instruction did not have an
   oparg.

GET_AITER

   "TOS = TOS.__aiter__()"를 구현합니다.

   버전 3.5에 추가.

   버전 3.7에서 변경: "__aiter__"로부터 어웨이터블 객체를 반환하는 것
   은 더는 지원되지 않습니다.

GET_ANEXT

   Pushes "get_awaitable(TOS.__anext__())" to the stack.  See
   "GET_AWAITABLE" for details about "get_awaitable".

   버전 3.5에 추가.

END_ASYNC_FOR

   Terminates an "async for" loop.  Handles an exception raised when
   awaiting a next item. The stack contains the async iterable in TOS1
   and the raised exception in TOS. Both are popped. If the exception
   is not "StopAsyncIteration", it is re-raised.

   버전 3.8에 추가.

   버전 3.11에서 변경: Exception representation on the stack now
   consist of one, not three, items.

BEFORE_ASYNC_WITH

   스택 최상단의 객체에서 "__aenter__"와 "__aexit__"를 해석(resolve)합
   니다. "__aexit__"와 "__aenter__()"의 결과를 스택으로 푸시합니다.

   버전 3.5에 추가.

**기타 옵코드**

PRINT_EXPR

   대화식 모드를 위한 표현식 문을 구현합니다. 스택에서 TOS가 제거되고
   인쇄됩니다. 비 대화식 모드에서, 표현식 문은 "POP_TOP"으로 종료됩니
   다.

SET_ADD(i)

   "set.add(TOS1[-i], TOS)"를 호출합니다. 집합 컴프리헨션을 구현하는
   데 사용됩니다.

LIST_APPEND(i)

   "list.append(TOS1[-i], TOS)"를 호출합니다. 리스트 컴프리헨션을 구현
   하는 데 사용됩니다.

MAP_ADD(i)

   "dict.__setitem__(TOS1[-i], TOS1, TOS)"를 호출합니다. 딕셔너리 컴프
   리헨션을 구현하는 데 사용됩니다.

   버전 3.1에 추가.

   버전 3.8에서 변경: 맵 값은 TOS이고 맵 키는 TOS1입니다. 전에는, 이것
   들이 반대였습니다.

모든 "SET_ADD", "LIST_APPEND" 및 "MAP_ADD" 명령어에 대해, 추가된 값이
나 키/값 쌍이 팝 되지만, 컨테이너 객체는 스택에 남아 있어서 루프의 추
가 이터레이션에 사용할 수 있습니다.

RETURN_VALUE

   TOS를 함수 호출자에게 반환합니다.

YIELD_VALUE

   TOS를 팝하고 *제너레이터*에서 그것을 산출합니다.

SETUP_ANNOTATIONS

   "locals()"에 "__annotations__"가 정의되어 있는지 확인합니다, 그렇지
   않으면 비어있는 "dict"로 설정됩니다. 이 옵코드는 클래스나 모듈 본문
   에 *변수 어노테이션*이 정적으로 포함될 때만 생성됩니다.

   버전 3.6에 추가.

IMPORT_STAR

   "'_'"로 시작하지 않는 모든 심볼을 모듈 TOS에서 지역 이름 공간으로
   직접 로드합니다. 모든 이름을 로드한 후 모듈이 팝 됩니다. 이 옵코드
   는 "from module import *"를 구현합니다.

POP_EXCEPT

   Pops a value from the stack, which is used to restore the exception
   state.

   버전 3.11에서 변경: Exception representation on the stack now
   consist of one, not three, items.

RERAISE

   Re-raises the exception currently on top of the stack. If oparg is
   non-zero, pops an additional value from the stack which is used to
   set "f_lasti" of the current frame.

   버전 3.9에 추가.

   버전 3.11에서 변경: Exception representation on the stack now
   consist of one, not three, items.

PUSH_EXC_INFO

   Pops a value from the stack. Pushes the current exception to the
   top of the stack. Pushes the value originally popped back to the
   stack. Used in exception handlers.

   버전 3.11에 추가.

CHECK_EXC_MATCH

   Performs exception matching for "except". Tests whether the TOS1 is
   an exception matching TOS. Pops TOS and pushes the boolean result
   of the test.

   버전 3.11에 추가.

CHECK_EG_MATCH

   Performs exception matching for "except*". Applies "split(TOS)" on
   the exception group representing TOS1.

   In case of a match, pops two items from the stack and pushes the
   non-matching subgroup ("None" in case of full match) followed by
   the matching subgroup. When there is no match, pops one item (the
   match type) and pushes "None".

   버전 3.11에 추가.

PREP_RERAISE_STAR

   Combines the raised and reraised exceptions list from TOS, into an
   exception group to propagate from a try-except* block. Uses the
   original exception group from TOS1 to reconstruct the structure of
   reraised exceptions. Pops two items from the stack and pushes the
   exception to reraise or "None" if there isn't one.

   버전 3.11에 추가.

WITH_EXCEPT_START

   Calls the function in position 4 on the stack with arguments (type,
   val, tb) representing the exception at the top of the stack. Used
   to implement the call "context_manager.__exit__(*exc_info())" when
   an exception has occurred in a "with" statement.

   버전 3.9에 추가.

   버전 3.11에서 변경: The "__exit__" function is in position 4 of the
   stack rather than 7. Exception representation on the stack now
   consist of one, not three, items.

LOAD_ASSERTION_ERROR

   "AssertionError"를 스택으로 푸시합니다. "assert" 문에서 사용됩니다.

   버전 3.9에 추가.

LOAD_BUILD_CLASS

   Pushes "builtins.__build_class__()" onto the stack.  It is later
   called to construct a class.

BEFORE_WITH(delta)

   This opcode performs several operations before a with block starts.
   First, it loads "__exit__()" from the context manager and pushes it
   onto the stack for later use by "WITH_EXCEPT_START".  Then,
   "__enter__()" is called. Finally, the result of calling the
   "__enter__()" method is pushed onto the stack.

   버전 3.11에 추가.

GET_LEN

   Push "len(TOS)" onto the stack.

   버전 3.10에 추가.

MATCH_MAPPING

   If TOS is an instance of "collections.abc.Mapping" (or, more
   technically: if it has the "Py_TPFLAGS_MAPPING" flag set in its
   "tp_flags"), push "True" onto the stack.  Otherwise, push "False".

   버전 3.10에 추가.

MATCH_SEQUENCE

   If TOS is an instance of "collections.abc.Sequence" and is *not* an
   instance of "str"/"bytes"/"bytearray" (or, more technically: if it
   has the "Py_TPFLAGS_SEQUENCE" flag set in its "tp_flags"), push
   "True" onto the stack.  Otherwise, push "False".

   버전 3.10에 추가.

MATCH_KEYS

   TOS is a tuple of mapping keys, and TOS1 is the match subject.  If
   TOS1 contains all of the keys in TOS, push a "tuple" containing the
   corresponding values. Otherwise, push "None".

   버전 3.10에 추가.

   버전 3.11에서 변경: Previously, this instruction also pushed a
   boolean value indicating success ("True") or failure ("False").

STORE_NAME(namei)

   Implements "name = TOS". *namei* is the index of *name* in the
   attribute "co_names" of the code object. The compiler tries to use
   "STORE_FAST" or "STORE_GLOBAL" if possible.

DELETE_NAME(namei)

   Implements "del name", where *namei* is the index into "co_names"
   attribute of the code object.

UNPACK_SEQUENCE(count)

   TOS를 *count* 개 개별 값으로 언팩합니다. 이 값들은 오른쪽에서 왼쪽
   으로 스택에 넣습니다.

UNPACK_EX(counts)

   스타드 타깃(starred target)으로의 대입을 구현합니다: TOS의 이터러블
   을 개별 값으로 언팩합니다. 여기서 값의 총수는 이터러블의 항목 수보
   다 적을 수 있습니다: 새 값 중 하나는 남은 모든 항목의 리스트입니다.

   *counts*의 하위 바이트는 리스트값 이전의 값의 개수이고, *counts*의
   상위 바이트는 그 이후의 값의 개수입니다. 결괏값들은 오른쪽에서 왼쪽
   으로 스택에 넣습니다.

STORE_ATTR(namei)

   "TOS.name = TOS1"을 구현합니다. 여기서 *namei*는 "co_names"에서
   name의 인덱스입니다.

DELETE_ATTR(namei)

   Implements "del TOS.name", using *namei* as index into "co_names"
   of the code object.

STORE_GLOBAL(namei)

   "STORE_NAME"처럼 작동하지만, 이름을 전역으로 저장합니다.

DELETE_GLOBAL(namei)

   "DELETE_NAME"처럼 작동하지만, 전역 이름을 삭제합니다.

LOAD_CONST(consti)

   "co_consts[consti]"를 스택으로 푸시합니다.

LOAD_NAME(namei)

   "co_names[namei]"와 연관된 값을 스택으로 푸시합니다.

BUILD_TUPLE(count)

   스택에서 *count* 개의 항목을 소비하는 튜플을 만들고, 결과 튜플을 스
   택으로 푸시합니다.

BUILD_LIST(count)

   "BUILD_TUPLE"처럼 작동하지만, 리스트를 만듭니다.

BUILD_SET(count)

   "BUILD_TUPLE"처럼 작동하지만, 집합을 만듭니다.

BUILD_MAP(count)

   새 딕셔너리 객체를 스택으로 푸시합니다. 딕셔너리가 *count* 항목을
   갖도록 "2 * count" 항목을 팝 합니다: "{..., TOS3: TOS2, TOS1:
   TOS}".

   버전 3.5에서 변경: 딕셔너리는 *count* 항목을 갖도록 미리 크기가 조
   정된 빈 딕셔너리를 만드는 대신 스택 항목에서 만들어집니다.

BUILD_CONST_KEY_MAP(count)

   상수 키에 특화된 "BUILD_MAP" 버전. 키의 튜플이 포함된 스택의 맨 위
   요소를 팝 한 다음, "TOS1"에서 시작하여, *count* 개의 값을 팝 하여
   만들어지는 딕셔너리의 값을 형성합니다.

   버전 3.6에 추가.

BUILD_STRING(count)

   스택에서 *count* 문자열을 이어붙이고 결과 문자열을 스택으로 푸시합
   니다.

   버전 3.6에 추가.

LIST_TO_TUPLE

   스택에서 리스트를 팝하고 같은 값을 포함하는 튜플을 푸시합니다.

   버전 3.9에 추가.

LIST_EXTEND(i)

   "list.extend(TOS1[-i], TOS)"를 호출합니다. 리스트를 만드는 데 사용
   됩니다.

   버전 3.9에 추가.

SET_UPDATE(i)

   "set.update(TOS1[-i], TOS)"를 호출합니다. 집합을 만드는 데 사용됩니
   다.

   버전 3.9에 추가.

DICT_UPDATE(i)

   "dict.update(TOS1[-i], TOS)"를 호출합니다. 딕셔너리를 만드는 데 사
   용됩니다.

   버전 3.9에 추가.

DICT_MERGE(i)

   "DICT_UPDATE"와 유사하지만, 중복 키에 대해 예외를 발생시킵니다.

   버전 3.9에 추가.

LOAD_ATTR(namei)

   TOS를 "getattr(TOS, co_names[namei])"로 바꿉니다.

COMPARE_OP(opname)

   불리언 연산을 수행합니다. 연산 이름은 "cmp_op[opname]"에서 찾을 수
   있습니다.

IS_OP(invert)

   "is" 비교를 수행하거나, "invert"가 1이면 "is not"을 수행합니다.

   버전 3.9에 추가.

CONTAINS_OP(invert)

   "in" 비교를 수행하거나, "invert"가 1이면 "not in"을 수행합니다.

   버전 3.9에 추가.

IMPORT_NAME(namei)

   모듈 "co_names[namei]"를 임포트 합니다. TOS와 TOS1이 팝 되고
   "__import__()"의 *fromlist*와 *level* 인자를 제공합니다. 모듈 객체
   가 스택으로 푸시 됩니다. 현재 이름 공간은 영향을 받지 않습니다: 올
   바른 import 문을 위해, 후속 "STORE_FAST" 명령어가 이름 공간을 수정
   합니다.

IMPORT_FROM(namei)

   TOS에서 발견된 모듈에서 어트리뷰트 "co_names[namei]"를 로드합니다.
   결과 객체는 스택에 푸시 되어, 뒤따르는 "STORE_FAST" 명령어로 저장됩
   니다.

JUMP_FORWARD(delta)

   바이트 코드 카운터를 *delta*만큼 증가시킵니다.

JUMP_BACKWARD(delta)

   Decrements bytecode counter by *delta*. Checks for interrupts.

   버전 3.11에 추가.

JUMP_BACKWARD_NO_INTERRUPT(delta)

   Decrements bytecode counter by *delta*. Does not check for
   interrupts.

   버전 3.11에 추가.

POP_JUMP_FORWARD_IF_TRUE(delta)

   If TOS is true, increments the bytecode counter by *delta*.  TOS is
   popped.

   버전 3.11에 추가.

POP_JUMP_BACKWARD_IF_TRUE(delta)

   If TOS is true, decrements the bytecode counter by *delta*.  TOS is
   popped.

   버전 3.11에 추가.

POP_JUMP_FORWARD_IF_FALSE(delta)

   If TOS is false, increments the bytecode counter by *delta*.  TOS
   is popped.

   버전 3.11에 추가.

POP_JUMP_BACKWARD_IF_FALSE(delta)

   If TOS is false, decrements the bytecode counter by *delta*.  TOS
   is popped.

   버전 3.11에 추가.

POP_JUMP_FORWARD_IF_NOT_NONE(delta)

   If TOS is not "None", increments the bytecode counter by *delta*.
   TOS is popped.

   버전 3.11에 추가.

POP_JUMP_BACKWARD_IF_NOT_NONE(delta)

   If TOS is not "None", decrements the bytecode counter by *delta*.
   TOS is popped.

   버전 3.11에 추가.

POP_JUMP_FORWARD_IF_NONE(delta)

   If TOS is "None", increments the bytecode counter by *delta*.  TOS
   is popped.

   버전 3.11에 추가.

POP_JUMP_BACKWARD_IF_NONE(delta)

   If TOS is "None", decrements the bytecode counter by *delta*.  TOS
   is popped.

   버전 3.11에 추가.

JUMP_IF_TRUE_OR_POP(delta)

   If TOS is true, increments the bytecode counter by *delta* and
   leaves TOS on the stack.  Otherwise (TOS is false), TOS is popped.

   버전 3.1에 추가.

   버전 3.11에서 변경: The oparg is now a relative delta rather than
   an absolute target.

JUMP_IF_FALSE_OR_POP(delta)

   If TOS is false, increments the bytecode counter by *delta* and
   leaves TOS on the stack.  Otherwise (TOS is true), TOS is popped.

   버전 3.1에 추가.

   버전 3.11에서 변경: The oparg is now a relative delta rather than
   an absolute target.

FOR_ITER(delta)

   TOS는 *이터레이터*입니다. 그것의 "__next__()" 메서드를 호출합니다.
   이것이 새로운 값을 산출하면, 스택에 푸시합니다 (그 밑에 이터레이터
   를 남겨둡니다). 이터레이터가 소진되었음을 표시하면, TOS가 팝 되고,
   바이트 코드 카운터가 *delta*만큼 증가합니다.

LOAD_GLOBAL(namei)

   Loads the global named "co_names[namei>>1]" onto the stack.

   버전 3.11에서 변경: If the low bit of "namei" is set, then a "NULL"
   is pushed to the stack before the global variable.

LOAD_FAST(var_num)

   지역 "co_varnames[var_num]"에 대한 참조를 스택으로 푸시합니다.

STORE_FAST(var_num)

   TOS를 지역 "co_varnames[var_num]"에 저장합니다.

DELETE_FAST(var_num)

   지역 "co_varnames[var_num]"을 삭제합니다.

MAKE_CELL(i)

   Creates a new cell in slot "i".  If that slot is nonempty then that
   value is stored into the new cell.

   버전 3.11에 추가.

LOAD_CLOSURE(i)

   Pushes a reference to the cell contained in slot "i" of the "fast
   locals" storage.  The name of the variable is
   "co_fastlocalnames[i]".

   Note that "LOAD_CLOSURE" is effectively an alias for "LOAD_FAST".
   It exists to keep bytecode a little more readable.

   버전 3.11에서 변경: "i" is no longer offset by the length of
   "co_varnames".

LOAD_DEREF(i)

   Loads the cell contained in slot "i" of the "fast locals" storage.
   Pushes a reference to the object the cell contains on the stack.

   버전 3.11에서 변경: "i" is no longer offset by the length of
   "co_varnames".

LOAD_CLASSDEREF(i)

   "LOAD_DEREF"와 비슷하지만, 셀을 참조하기 전에 먼저 지역 딕셔너리를
   확인합니다. 이것은 클래스 본문에서 자유 변수를 로드하는 데 사용됩니
   다.

   버전 3.4에 추가.

   버전 3.11에서 변경: "i" is no longer offset by the length of
   "co_varnames".

STORE_DEREF(i)

   Stores TOS into the cell contained in slot "i" of the "fast locals"
   storage.

   버전 3.11에서 변경: "i" is no longer offset by the length of
   "co_varnames".

DELETE_DEREF(i)

   Empties the cell contained in slot "i" of the "fast locals"
   storage. Used by the "del" statement.

   버전 3.2에 추가.

   버전 3.11에서 변경: "i" is no longer offset by the length of
   "co_varnames".

COPY_FREE_VARS(n)

   Copies the "n" free variables from the closure into the frame.
   Removes the need for special code on the caller's side when calling
   closures.

   버전 3.11에 추가.

RAISE_VARARGS(argc)

   *argc*의 값에 따라, "raise" 문의 3가지 형식 중 하나를 사용하여 예외
   를 발생시킵니다:

   * 0: "raise" (이전 예외를 다시 발생시킵니다)

   * 1: "raise TOS" ("TOS"에 있는 예외 인스턴스나 형을 발생시킵니다)

   * 2: "raise TOS1 from TOS" ("__cause__"가 "TOS"로 설정된 "TOS1"에
     있는 예외 인스턴스나 형을 발생시킵니다)

CALL(argc)

   Calls a callable object with the number of arguments specified by
   "argc", including the named arguments specified by the preceding
   "KW_NAMES", if any. On the stack are (in ascending order), either:

   * NULL

   * The callable

   * The positional arguments

   * The named arguments

   or:

   * The callable

   * "self"

   * The remaining positional arguments

   * The named arguments

   "argc" is the total of the positional and named arguments,
   excluding "self" when a "NULL" is not present.

   "CALL" pops all arguments and the callable object off the stack,
   calls the callable object with those arguments, and pushes the
   return value returned by the callable object.

   버전 3.11에 추가.

CALL_FUNCTION_EX(flags)

   위치와 키워드 인자의 변수 집합으로 콜러블 객체를 호출합니다.
   *flags*의 최하위 비트가 설정되면, 스택의 맨 위에 추가 키워드 인자가
   포함된 매핑 객체가 포함됩니다. 콜러블이 호출되기 전에, 매핑 객체와
   이터러블 객체는 각각 "언팩" 되고 그 내용이 각각 키워드와 위치 인자
   로 전달됩니다. "CALL_FUNCTION_EX"는 모든 인자와 콜러블 객체를 스택
   에서 팝하고, 해당 인자로 콜러블 객체를 호출한 다음, 콜러블 객체가
   반환한 반환 값을 푸시합니다.

   버전 3.6에 추가.

LOAD_METHOD(namei)

   Loads a method named "co_names[namei]" from the TOS object. TOS is
   popped. This bytecode distinguishes two cases: if TOS has a method
   with the correct name, the bytecode pushes the unbound method and
   TOS. TOS will be used as the first argument ("self") by "CALL" when
   calling the unbound method. Otherwise, "NULL" and the object return
   by the attribute lookup are pushed.

   버전 3.7에 추가.

PRECALL(argc)

   Prefixes "CALL". Logically this is a no op. It exists to enable
   effective specialization of calls. "argc" is the number of
   arguments as described in "CALL".

   버전 3.11에 추가.

PUSH_NULL

      Pushes a "NULL" to the stack. Used in the call sequence to match
      the "NULL" pushed by "LOAD_METHOD" for non-method calls.

   버전 3.11에 추가.

KW_NAMES(i)

   Prefixes "PRECALL". Stores a reference to "co_consts[consti]" into
   an internal variable for use by "CALL". "co_consts[consti]" must be
   a tuple of strings.

   버전 3.11에 추가.

MAKE_FUNCTION(flags)

   스택에 새 함수 객체를 푸시합니다. 바닥에서 맨 위로, 인자가 지정된
   플래그 값을 전달하면 소비되는 스택은 값으로 구성되어야 합니다.

   * "0x01" 위치 전용과 위치-키워드 매개 변수를 위한 기본값의 위치 순
     서 튜플

   * "0x02" 키워드 전용 매개 변수의 기본값 딕셔너리

   * "0x04" a tuple of strings containing parameters' annotations

   * "0x08" 자유 변수를 위한 셀을 포함하는 튜플, 클로저를 만듭니다

   * the code associated with the function (at TOS)

   버전 3.10에서 변경: Flag value "0x04" is a tuple of strings instead
   of dictionary

   버전 3.11에서 변경: Qualified name at TOS was removed.

BUILD_SLICE(argc)

   스택에 슬라이스 객체를 푸시합니다. *argc*는 2나 3이어야 합니다. 2이
   면, "slice(TOS1, TOS)"가 푸시 됩니다; 3이면, "slice(TOS2, TOS1,
   TOS)"가 푸시 됩니다. 자세한 정보는 "slice()" 내장 함수를 참조하십시
   오.

EXTENDED_ARG(ext)

   너무 커서 기본 1바이트에 맞지 않는 인자를 가진 옵코드에 접두어로 붙
   입니다. *ext*는 인자에서 더 높은 비트로 작동하는 추가 바이트를 보유
   합니다. 각 옵코드마다, 최대 3개의 접두사 "EXTENDED_ARG"가 허용되며,
   2바이트에서 4바이트 사이의 인자를 형성합니다.

FORMAT_VALUE(flags)

   포맷 문자열 리터럴(f-문자열)을 구현하는 데 사용됩니다. 스택에서 선
   택적 *fmt_spec*을 팝 한 다음, 필수 *value*를 팝 합니다. *flags*는
   다음과 같이 해석됩니다:

   * "(flags & 0x03) == 0x00": *value*는 있는 그대로 포맷됩니다.

   * "(flags & 0x03) == 0x01": 포맷하기 전에 *value*에 대해 "str()"을
     호출합니다.

   * "(flags & 0x03) == 0x02": 포맷하기 전에 *value*에 대해 "repr()"을
     호출합니다.

   * "(flags & 0x03) == 0x03": 포맷하기 전에 *value*에 대해 "ascii()"
     를 호출합니다.

   * "(flags & 0x04) == 0x04": 스택에서 *fmt_spec*을 팝 하고 그것을 사
     용합니다, 그렇지 않으면 빈 *fmt_spec*을 사용합니다.

   "PyObject_Format()"을 사용하여 포맷이 수행됩니다. 결과는 스택에 푸
   시 됩니다.

   버전 3.6에 추가.

MATCH_CLASS(count)

   TOS is a tuple of keyword attribute names, TOS1 is the class being
   matched against, and TOS2 is the match subject.  *count* is the
   number of positional sub-patterns.

   Pop TOS, TOS1, and TOS2.  If TOS2 is an instance of TOS1 and has
   the positional and keyword attributes required by *count* and TOS,
   push a tuple of extracted attributes.  Otherwise, push "None".

   버전 3.10에 추가.

   버전 3.11에서 변경: Previously, this instruction also pushed a
   boolean value indicating success ("True") or failure ("False").

RESUME(where)

      A no-op. Performs internal tracing, debugging and optimization
      checks.

      The "where" operand marks where the "RESUME" occurs:

      * "0" The start of a function

      * "1" After a "yield" expression

      * "2" After a "yield from" expression

      * "3" After an "await" expression

   버전 3.11에 추가.

RETURN_GENERATOR

   Create a generator, coroutine, or async generator from the current
   frame. Clear the current frame and return the newly created
   generator.

   버전 3.11에 추가.

SEND

   Sends "None" to the sub-generator of this generator. Used in "yield
   from" and "await" statements.

   버전 3.11에 추가.

ASYNC_GEN_WRAP

   Wraps the value on top of the stack in an
   "async_generator_wrapped_value". Used to yield in async generators.

   버전 3.11에 추가.

HAVE_ARGUMENT

   이것은 진짜 옵코드가 아닙니다. 인자를 사용하지 않는 옵코드와 사용하
   는 옵코드 사이의 구분 선을 식별합니다 (각각, "< HAVE_ARGUMENT"와
   ">= HAVE_ARGUMENT").

   버전 3.6에서 변경: 이제 모든 명령어에는 인자가 있지만, "<
   HAVE_ARGUMENT"인 옵코드는 이를 무시합니다. 이전에는, ">=
   HAVE_ARGUMENT"인 옵코드에만 인자가 있었습니다.


옵코드 모음
===========

이 모음은 바이트 코드 명령어의 자동 검사를 위해 제공됩니다:

dis.opname

   연산 이름의 시퀀스, 바이트 코드를 사용하여 인덱싱할 수 있습니다.

dis.opmap

   연산 이름을 바이트 코드로 매핑하는 딕셔너리.

dis.cmp_op

   모든 비교 연산 이름의 시퀀스.

dis.hasconst

   상수에 액세스하는 바이트 코드의 시퀀스.

dis.hasfree

   자유 변수에 액세스하는 바이트 코드의 시퀀스 (이 문맥에서 '자유'는
   내부 스코프에서 참조되는 현재 스코프의 이름이나 이 스코프에서 참조
   되는 외부 스코프의 이름을 나타냅니다. 전역이나 내장 스코프에 대한
   참조는 포함하지 *않습니다*).

dis.hasname

   어트리뷰트를 이름으로 액세스하는 바이트 코드의 시퀀스.

dis.hasjrel

   상대 점프 대상이 있는 바이트 코드의 시퀀스.

dis.hasjabs

   절대 점프 대상이 있는 바이트 코드의 시퀀스.

dis.haslocal

   지역 변수에 액세스하는 바이트 코드의 시퀀스.

dis.hascompare

   불리언 연산의 바이트 코드의 시퀀스.
