모듈 객체
*********

PyTypeObject PyModule_Type
    * Part of the Stable ABI.*

   이 "PyTypeObject" 인스턴스는 파이썬 모듈 형을 나타냅니다. 이것은
   "types.ModuleType"으로 파이썬 프로그램에 노출됩니다.

int PyModule_Check(PyObject *p)

   *p*가 모듈 객체이거나 모듈 객체의 서브 형이면 참을 반환합니다. 이
   함수는 항상 성공합니다.

int PyModule_CheckExact(PyObject *p)

   *p*가 모듈 객체이지만, "PyModule_Type"의 서브 형이 아니면 참을 반환
   합니다. 이 함수는 항상 성공합니다.

PyObject *PyModule_NewObject(PyObject *name)
    *Return value: New reference.** Part of the Stable ABI since
   version 3.7.*

   "__name__" 어트리뷰트가 *name*으로 설정된 새 모듈 객체를 반환합니다
   . 모듈의 "__name__", "__doc__", "__package__" 및 "__loader__" 어트
   리뷰트가 채워집니다 ("__name__"을 제외하고 모두 "None"으로 설정됩니
   다); "__file__" 어트리뷰트를 제공하는 것은 호출자의 책임입니다.

   버전 3.3에 추가.

   버전 3.4에서 변경: "__package__"와 "__loader__"가 "None"으로 설정됩
   니다.

PyObject *PyModule_New(const char *name)
    *Return value: New reference.** Part of the Stable ABI.*

   "PyModule_NewObject()"와 비슷하지만, name이 유니코드 객체 대신
   UTF-8로 인코딩된 문자열입니다.

PyObject *PyModule_GetDict(PyObject *module)
    *Return value: Borrowed reference.** Part of the Stable ABI.*

   *module*의 이름 공간을 구현하는 딕셔너리 객체를 반환합니다; 이 객체
   는 모듈 객체의 "__dict__" 어트리뷰트와 같습니다. *module*이 모듈 객
   체(또는 모듈 객체의 서브 형)가 아니면, "SystemError"가 발생하고
   "NULL"이 반환됩니다.

   It is recommended extensions use other "PyModule_*" and
   "PyObject_*" functions rather than directly manipulate a module's
   "__dict__".

PyObject *PyModule_GetNameObject(PyObject *module)
    *Return value: New reference.** Part of the Stable ABI since
   version 3.7.*

   *module*의 "__name__" 값을 반환합니다. 모듈이 제공하지 않거나, 문자
   열이 아니면, "SystemError"가 발생하고 "NULL"이 반환됩니다.

   버전 3.3에 추가.

const char *PyModule_GetName(PyObject *module)
    * Part of the Stable ABI.*

   "PyModule_GetNameObject()"와 비슷하지만 "'utf-8'"로 인코딩된 이름을
   반환합니다.

void *PyModule_GetState(PyObject *module)
    * Part of the Stable ABI.*

   모듈의 "상태", 즉 모듈 생성 시 할당된 메모리 블록을 가리키는 포인터
   나 "NULL"을 반환합니다. "PyModuleDef.m_size"를 참조하십시오.

PyModuleDef *PyModule_GetDef(PyObject *module)
    * Part of the Stable ABI.*

   모듈이 만들어진 "PyModuleDef" 구조체에 대한 포인터나 모듈이 정의에
   서 만들어지지 않았으면 "NULL"을 반환합니다.

PyObject *PyModule_GetFilenameObject(PyObject *module)
    *Return value: New reference.** Part of the Stable ABI.*

   *module*의 "__file__" 어트리뷰트를 사용하여 *module*이 로드된 파일
   이름을 반환합니다. 정의되지 않았거나 유니코드 문자열이 아니면,
   "SystemError"를 발생시키고 "NULL"을 반환합니다; 그렇지 않으면 유니
   코드 객체에 대한 참조를 반환합니다.

   버전 3.2에 추가.

const char *PyModule_GetFilename(PyObject *module)
    * Part of the Stable ABI.*

   "PyModule_GetFilenameObject()"와 비슷하지만 'utf-8'로 인코딩된 파일
   명을 반환합니다.

   버전 3.2부터 폐지됨: "PyModule_GetFilename()" raises
   "UnicodeEncodeError" on unencodable filenames, use
   "PyModule_GetFilenameObject()" instead.


C 모듈 초기화
=============

모듈 객체는 일반적으로 확장 모듈(초기화 함수를 내보내는 공유 라이브러
리)이나 컴파일된 모듈(초기화 함수가 "PyImport_AppendInittab()"을 사용
하여 추가된)에서 만들어집니다. 자세한 내용은 C와 C++ 확장 빌드하기나
내장된 파이썬을 확장하기를 참조하십시오.

초기화 함수는 모듈 정의 인스턴스를 "PyModule_Create()"에 전달하고 결과
모듈 객체를 반환하거나, 정의 구조체 자체를 반환하여 "다단계 초기화"를
요청할 수 있습니다.

type PyModuleDef
    * Part of the Stable ABI (including all members).*

   모듈 객체를 만드는 데 필요한 모든 정보를 담고 있는 모듈 정의 구조체
   . 일반적으로 각 모듈에 대해 이 형의 정적으로 초기화된 변수가 하나만
   있습니다.

   PyModuleDef_Base m_base

      Always initialize this member to "PyModuleDef_HEAD_INIT".

   const char *m_name

      새 모듈의 이름.

   const char *m_doc

      모듈의 독스트링; 일반적으로 "PyDoc_STRVAR"로 만들어진 독스트링
      변수가 사용됩니다.

   Py_ssize_t m_size

      모듈 상태는 정적 전역이 아닌 "PyModule_GetState()"로 조회할 수
      있는 모듈별 메모리 영역에 유지될 수 있습니다. 이것은 여러 서브
      인터프리터에서 모듈을 사용하는 것을 안전하게 만듭니다.

      This memory area is allocated based on *m_size* on module
      creation, and freed when the module object is deallocated, after
      the "m_free" function has been called, if present.

      "m_size"를 "-1"로 설정하면 모듈이 전역 상태를 갖기 때문에 서브
      인터프리터를 지원하지 않는다는 뜻입니다.

      음수가 아닌 값으로 설정하면 모듈을 다시 초기화 할 수 있다는 뜻이
      며 상태에 필요한 추가 메모리양을 지정합니다. 다단계 초기화에는
      음이 아닌 "m_size"가 필요합니다.

      자세한 내용은 **PEP 3121**을 참조하십시오.

   PyMethodDef *m_methods

      "PyMethodDef" 값으로 기술되는 모듈 수준 함수 테이블에 대한 포인
      터. 함수가 없으면 "NULL"일 수 있습니다.

   PyModuleDef_Slot *m_slots

      다단계 초기화를 위한 슬롯 정의 배열, "{0, NULL}" 항목으로 종료됩
      니다. 단단계 초기화를 사용할 때, *m_slots*는 "NULL"이어야 합니다
      .

      버전 3.5에서 변경: 버전 3.5 이전에는, 이 멤버가 항상 "NULL"로 설
      정되었으며, 다음과 같이 정의되었습니다:

         inquiry m_reload

   traverseproc m_traverse

      모듈 객체의 GC 탐색 중 호출할 탐색 함수나, 필요하지 않으면
      "NULL".

      This function is not called if the module state was requested
      but is not allocated yet. This is the case immediately after the
      module is created and before the module is executed
      ("Py_mod_exec" function). More precisely, this function is not
      called if "m_size" is greater than 0 and the module state (as
      returned by "PyModule_GetState()") is "NULL".

      버전 3.9에서 변경: 모듈 상태가 할당되기 전에 더는 호출되지 않습
      니다.

   inquiry m_clear

      모듈 객체의 GC 정리 중에 호출할 정리(clear) 함수나, 필요하지 않
      으면 "NULL".

      This function is not called if the module state was requested
      but is not allocated yet. This is the case immediately after the
      module is created and before the module is executed
      ("Py_mod_exec" function). More precisely, this function is not
      called if "m_size" is greater than 0 and the module state (as
      returned by "PyModule_GetState()") is "NULL".

      Like "PyTypeObject.tp_clear", this function is not *always*
      called before a module is deallocated. For example, when
      reference counting is enough to determine that an object is no
      longer used, the cyclic garbage collector is not involved and
      "m_free" is called directly.

      버전 3.9에서 변경: 모듈 상태가 할당되기 전에 더는 호출되지 않습
      니다.

   freefunc m_free

      모듈 객체 할당 해제 중에 호출할 함수나, 필요하지 않으면 "NULL".

      This function is not called if the module state was requested
      but is not allocated yet. This is the case immediately after the
      module is created and before the module is executed
      ("Py_mod_exec" function). More precisely, this function is not
      called if "m_size" is greater than 0 and the module state (as
      returned by "PyModule_GetState()") is "NULL".

      버전 3.9에서 변경: 모듈 상태가 할당되기 전에 더는 호출되지 않습
      니다.


단단계 초기화
-------------

모듈 초기화 함수는 모듈 객체를 직접 만들고 반환할 수 있습니다. 이것을
"단단계 초기화"라고 하며, 다음 두 모듈 생성 함수 중 하나를 사용합니다:

PyObject *PyModule_Create(PyModuleDef *def)
    *Return value: New reference.*

   Create a new module object, given the definition in *def*.  This
   behaves like "PyModule_Create2()" with *module_api_version* set to
   "PYTHON_API_VERSION".

PyObject *PyModule_Create2(PyModuleDef *def, int module_api_version)
    *Return value: New reference.** Part of the Stable ABI.*

   *def*의 정의에 따라, API 버전 *module_api_version*을 가정하여 새 모
   듈 객체를 만듭니다. 해당 버전이 실행 중인 인터프리터 버전과 일치하
   지 않으면, "RuntimeWarning"을 발생시킵니다.

   참고:

     이 함수는 대부분 "PyModule_Create()"를 대신 사용해야 합니다; 확실
     히 필요할 때만 사용하십시오.

Before it is returned from in the initialization function, the
resulting module object is typically populated using functions like
"PyModule_AddObjectRef()".


다단계 초기화
-------------

An alternate way to specify extensions is to request "multi-phase
initialization". Extension modules created this way behave more like
Python modules: the initialization is split between the *creation
phase*, when the module object is created, and the *execution phase*,
when it is populated. The distinction is similar to the "__new__()"
and "__init__()" methods of classes.

Unlike modules created using single-phase initialization, these
modules are not singletons: if the *sys.modules* entry is removed and
the module is re-imported, a new module object is created, and the old
module is subject to normal garbage collection -- as with Python
modules. By default, multiple modules created from the same definition
should be independent: changes to one should not affect the others.
This means that all state should be specific to the module object
(using e.g. using "PyModule_GetState()"), or its contents (such as the
module's "__dict__" or individual classes created with
"PyType_FromSpec()").

다단계 초기화를 사용하여 만들어진 모든 모듈은 서브 인터프리터를 지원할
것으로 기대됩니다. 다중 모듈을 독립적으로 유지하는 것은 일반적으로 이
를 달성하기에 충분합니다.

다단계 초기화를 요청하기 위해, 초기화 함수(PyInit_modulename)는 비어
있지 않은 "m_slots"를 가진 "PyModuleDef" 인스턴스를 반환합니다. 반환되
기 전에, "PyModuleDef" 인스턴스를 다음 함수를 사용하여 초기화해야 합니
다:

PyObject *PyModuleDef_Init(PyModuleDef *def)
    *Return value: Borrowed reference.** Part of the Stable ABI since
   version 3.5.*

   모듈 정의가 형과 참조 횟수를 올바르게 보고하는 올바르게 초기화된 파
   이썬 객체이게 합니다.

   *def*를 "PyObject*"로 캐스트 하거나, 에러가 발생하면 "NULL"을 반환
   합니다.

   버전 3.5에 추가.

모듈 정의의 *m_slots* 멤버는 "PyModuleDef_Slot" 구조체의 배열을 가리켜
야 합니다:

type PyModuleDef_Slot

   int slot

      아래 설명된 사용 가능한 값 중에서 선택된, 슬롯 ID.

   void *value

      슬롯 ID에 따라 그 의미가 달라지는, 슬롯의 값.

   버전 3.5에 추가.

*m_slots* 배열은 id가 0인 슬롯으로 종료해야 합니다.

사용 가능한 슬롯 형은 다음과 같습니다:

Py_mod_create

   모듈 객체 자체를 만들기 위해 호출되는 함수를 지정합니다. 이 슬롯의
   *value* 포인터는 다음과 같은 서명을 갖는 함수를 가리켜야 합니다:

   PyObject *create_module(PyObject *spec, PyModuleDef *def)

   이 함수는 **PEP 451**에 정의된 대로, "ModuleSpec" 인스턴스와 모듈
   정의를 받습니다. 새 모듈 객체를 반환하거나, 에러를 설정하고 "NULL"
   을 반환해야 합니다.

   이 함수는 최소한으로 유지해야 합니다. 특히 같은 모듈을 다시 임포트
   하려고 시도하면 무한 루프가 발생할 수 있어서, 임의의 파이썬 코드를
   호출하면 안 됩니다.

   하나의 모듈 정의에서 여러 "Py_mod_create" 슬롯을 지정할 수 없습니다
   .

   "Py_mod_create"를 지정하지 않으면, 임포트 절차는 "PyModule_New()"를
   사용하여 일반 모듈 객체를 만듭니다. 이름은 정의가 아니라 *spec*에서
   취합니다, 확장 모듈이 단일 모듈 정의를 공유하면서 모듈 계층 구조에
   서 해당 위치에 동적으로 조정되고 심볼릭 링크를 통해 다른 이름으로
   임포트 될 수 있도록 하기 위함입니다.

   반환된 객체가 "PyModule_Type"의 인스턴스 일 필요는 없습니다. 임포트
   관련 어트리뷰트 설정과 읽기를 지원하는 한 모든 형을 사용할 수 있습
   니다. 그러나, "PyModuleDef"에 "NULL"이 아닌 "m_traverse",
   "m_clear", "m_free"; 0이 아닌 "m_size"; 또는 "Py_mod_create" 이외의
   슬롯이 있으면, "PyModule_Type" 인스턴스 만 반환될 수 있습니다.

Py_mod_exec

   모듈을 *실행*하기 위해 호출되는 함수를 지정합니다. 이것은 파이썬 모
   듈의 코드를 실행하는 것과 동등합니다: 일반적으로, 이 함수는 클래스
   와 상수를 모듈에 추가합니다. 함수의 서명은 다음과 같습니다:

   int exec_module(PyObject *module)

   여러 개의 "Py_mod_exec" 슬롯이 지정되면, *m_slots* 배열에 나타나는
   순서대로 처리됩니다.

다단계 초기화에 대한 자세한 내용은 **PEP 489**를 참조하십시오.


저수준 모듈 생성 함수
---------------------

다단계 초기화를 사용할 때 수면 아래에서는 다음 함수가 호출됩니다. 이들
은 직접 사용할 수 있는데, 예를 들어 모듈 객체를 동적으로 생성할 때 그
렇습니다. 모듈을 완전히 초기화하려면 "PyModule_FromDefAndSpec"과
"PyModule_ExecDef"를 모두 호출해야 함에 유의하십시오.

PyObject *PyModule_FromDefAndSpec(PyModuleDef *def, PyObject *spec)
    *Return value: New reference.*

   Create a new module object, given the definition in *def* and the
   ModuleSpec *spec*.  This behaves like "PyModule_FromDefAndSpec2()"
   with *module_api_version* set to "PYTHON_API_VERSION".

   버전 3.5에 추가.

PyObject *PyModule_FromDefAndSpec2(PyModuleDef *def, PyObject *spec, int module_api_version)
    *Return value: New reference.** Part of the Stable ABI since
   version 3.7.*

   Create a new module object, given the definition in *def* and the
   ModuleSpec *spec*, assuming the API version *module_api_version*.
   If that version does not match the version of the running
   interpreter, a "RuntimeWarning" is emitted.

   참고:

     이 함수는 대부분 "PyModule_FromDefAndSpec()"을 대신 사용해야 합니
     다; 확실히 필요할 때만 사용하십시오.

   버전 3.5에 추가.

int PyModule_ExecDef(PyObject *module, PyModuleDef *def)
    * Part of the Stable ABI since version 3.7.*

   *def*에 지정된 모든 실행 슬롯("Py_mod_exec")을 처리합니다.

   버전 3.5에 추가.

int PyModule_SetDocString(PyObject *module, const char *docstring)
    * Part of the Stable ABI since version 3.7.*

   *module*의 독스트링을 *docstring*으로 설정합니다. 이 함수는
   "PyModule_Create"나 "PyModule_FromDefAndSpec"을 사용하여
   "PyModuleDef"에서 모듈을 만들 때 자동으로 호출됩니다.

   버전 3.5에 추가.

int PyModule_AddFunctions(PyObject *module, PyMethodDef *functions)
    * Part of the Stable ABI since version 3.7.*

   "NULL" 종료 *functions* 배열의 함수를 *module*에 추가합니다. 개별
   항목에 대한 자세한 내용은 "PyMethodDef" 설명서를 참조하십시오 (공유
   모듈 이름 공간이 없기 때문에, C로 구현된 모듈 수준 "함수
   (functions)"는 일반적으로 첫 번째 매개 변수로 모듈을 수신하여, 파이
   썬 클래스의 인스턴스 메서드와 유사하게 만듭니다). 이 함수는
   "PyModule_Create"나 "PyModule_FromDefAndSpec"을 사용하여
   "PyModuleDef"에서 모듈을 만들 때 자동으로 호출됩니다.

   버전 3.5에 추가.


지원 함수
---------

모듈 초기화 함수(단단계 초기화를 사용하는 경우)나 모듈 실행 슬롯에서
호출되는 함수(다단계 초기화를 사용하는 경우)는, 모듈 상태 초기화를 도
우려고 다음 함수를 사용할 수 있습니다:

int PyModule_AddObjectRef(PyObject *module, const char *name, PyObject *value)
    * Part of the Stable ABI since version 3.10.*

   Add an object to *module* as *name*.  This is a convenience
   function which can be used from the module's initialization
   function.

   On success, return "0". On error, raise an exception and return
   "-1".

   Return "NULL" if *value* is "NULL". It must be called with an
   exception raised in this case.

   Example usage:

      static int
      add_spam(PyObject *module, int value)
      {
          PyObject *obj = PyLong_FromLong(value);
          if (obj == NULL) {
              return -1;
          }
          int res = PyModule_AddObjectRef(module, "spam", obj);
          Py_DECREF(obj);
          return res;
       }

   The example can also be written without checking explicitly if
   *obj* is "NULL":

      static int
      add_spam(PyObject *module, int value)
      {
          PyObject *obj = PyLong_FromLong(value);
          int res = PyModule_AddObjectRef(module, "spam", obj);
          Py_XDECREF(obj);
          return res;
       }

   Note that "Py_XDECREF()" should be used instead of "Py_DECREF()" in
   this case, since *obj* can be "NULL".

   버전 3.10에 추가.

int PyModule_AddObject(PyObject *module, const char *name, PyObject *value)
    * Part of the Stable ABI.*

   Similar to "PyModule_AddObjectRef()", but steals a reference to
   *value* on success (if it returns "0").

   The new "PyModule_AddObjectRef()" function is recommended, since it
   is easy to introduce reference leaks by misusing the
   "PyModule_AddObject()" function.

   참고:

     Unlike other functions that steal references,
     "PyModule_AddObject()" only releases the reference to *value*
     **on success**.This means that its return value must be checked,
     and calling code must "Py_DECREF()" *value* manually on error.

   Example usage:

      static int
      add_spam(PyObject *module, int value)
      {
          PyObject *obj = PyLong_FromLong(value);
          if (obj == NULL) {
              return -1;
          }
          if (PyModule_AddObject(module, "spam", obj) < 0) {
              Py_DECREF(obj);
              return -1;
          }
          // PyModule_AddObject() stole a reference to obj:
          // Py_DECREF(obj) is not needed here
          return 0;
      }

   The example can also be written without checking explicitly if
   *obj* is "NULL":

      static int
      add_spam(PyObject *module, int value)
      {
          PyObject *obj = PyLong_FromLong(value);
          if (PyModule_AddObject(module, "spam", obj) < 0) {
              Py_XDECREF(obj);
              return -1;
          }
          // PyModule_AddObject() stole a reference to obj:
          // Py_DECREF(obj) is not needed here
          return 0;
      }

   Note that "Py_XDECREF()" should be used instead of "Py_DECREF()" in
   this case, since *obj* can be "NULL".

int PyModule_AddIntConstant(PyObject *module, const char *name, long value)
    * Part of the Stable ABI.*

   *module*에 정수 상수를 *name*으로 추가합니다. 이 편의 함수는 모듈의
   초기화 함수에서 사용할 수 있습니다. 에러 시 "-1"을, 성공하면 "0"을
   반환합니다.

int PyModule_AddStringConstant(PyObject *module, const char *name, const char *value)
    * Part of the Stable ABI.*

   *module*에 문자열 상수를 *name*으로 추가합니다. 이 편의 함수는 모듈
   의 초기화 함수에서 사용할 수 있습니다. 문자열 *value*는 "NULL"로 끝
   나야 합니다. 에러 시 "-1"을, 성공 시 "0"을 반환합니다.

PyModule_AddIntMacro(module, macro)

   *module*에 int 상수를 추가합니다. 이름과 값은 *macro*에서 취합니다.
   예를 들어 "PyModule_AddIntMacro(module, AF_INET)"은 *AF_INET* 값을
   가진 int 상수 *AF_INET*을 *module*에 추가합니다. 에러 시 "-1"을, 성
   공하면 "0"을 반환합니다.

PyModule_AddStringMacro(module, macro)

   *module*에 문자열 상수를 추가합니다.

int PyModule_AddType(PyObject *module, PyTypeObject *type)
    * Part of the Stable ABI since version 3.10.*

   *module*에 형 객체를 추가합니다. 내부적으로 "PyType_Ready()"를 호출
   하여 형 객체를 파이널라이즈합니다. 형 객체의 이름은 점 뒤 "tp_name"
   의 마지막 구성 요소에서 가져옵니다. 에러가 발생하면 "-1", 성공하면
   "0"을 반환합니다.

   버전 3.9에 추가.


모듈 조회
=========

단단계 초기화는 현재 인터프리터의 컨텍스트에서 조회할 수 있는 싱글톤
모듈을 만듭니다. 이는 나중에 모듈 정의에 대한 참조만으로 모듈 객체를
검색할 수 있도록 합니다.

이 함수들은 다단계 초기화를 사용하여 만들어진 모듈에서는 작동하지 않습
니다. 단일 정의에서 그러한 모듈이 여러 개 만들어질 수 있기 때문입니다.

PyObject *PyState_FindModule(PyModuleDef *def)
    *Return value: Borrowed reference.** Part of the Stable ABI.*

   현재 인터프리터에 대해 *def*에서 만들어진 모듈 객체를 반환합니다.
   이 메서드를 사용하려면 먼저 모듈 객체가 "PyState_AddModule()"로 인
   터프리터 상태에 연결되어 있어야 합니다. 해당 모듈 객체를 찾을 수 없
   거나 인터프리터 상태에 아직 연결되지 않았으면, "NULL"을 반환합니다.

int PyState_AddModule(PyObject *module, PyModuleDef *def)
    * Part of the Stable ABI since version 3.3.*

   함수에 전달된 모듈 객체를 인터프리터 상태에 연결합니다. 이는
   "PyState_FindModule()"을 통해 모듈 객체에 액세스 할 수 있도록 합니
   다.

   단단계 초기화를 사용하여 만든 모듈에만 효과가 있습니다.

   파이썬은 모듈을 임포트 한 후 자동으로 "PyState_AddModule"을 호출하
   므로, 모듈 초기화 코드에서 호출하는 것은 불필요합니다 (하지만 무해
   합니다). 모듈의 자체 초기화 코드가 추후 "PyState_FindModule"을 호출
   하는 경우에만 명시적인 호출이 필요합니다. 이 함수는 주로 대안 임포
   트 메커니즘을 구현하기 위한 것입니다 (직접 호출하거나, 필요한 상태
   갱신에 대한 자세한 내용에 대해 해당 구현을 참조함으로써).

   호출자는 GIL을 보유해야 합니다.

   성공하면 0을, 실패하면 -1을 반환합니다.

   버전 3.3에 추가.

int PyState_RemoveModule(PyModuleDef *def)
    * Part of the Stable ABI since version 3.3.*

   *def*에서 만들어진 모듈 객체를 인터프리터 상태에서 제거합니다. 성공
   하면 0을, 실패하면 -1을 반환합니다.

   호출자는 GIL을 보유해야 합니다.

   버전 3.3에 추가.
