정수 객체
*********

모든 정수는 임의의 크기의 "long" 정수 객체로 구현됩니다.

에러 시, 대부분의 "PyLong_As*" API는 숫자와 구별할 수 없는 "(return
type)-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를 사용하
십시오.

type PyLongObject
    * Part of the Limited API (as an opaque struct).*

   이 "PyObject"의 서브 형은 파이썬 정수 객체를 나타냅니다.

PyTypeObject PyLong_Type
    * Part of the Stable ABI.*

   이 "PyTypeObject" 인스턴스는 파이썬 정수 형을 나타냅니다. 이것은 파
   이썬 계층의 "int"와 같은 객체입니다.

int PyLong_Check(PyObject *p)

   인자가 "PyLongObject"이나 "PyLongObject"의 서브 형이면 참을 반환합
   니다. 이 함수는 항상 성공합니다.

int PyLong_CheckExact(PyObject *p)

   인자가 "PyLongObject" 이지만 "PyLongObject"의 서브 형이 아니면 참을
   반환합니다. 이 함수는 항상 성공합니다.

PyObject *PyLong_FromLong(long v)
    *Return value: New reference.** Part of the Stable ABI.*

   *v*로부터 새 "PyLongObject" 객체를 반환하거나, 실패하면 "NULL"을 반
   환합니다.

   The current implementation keeps an array of integer objects for
   all integers between "-5" and "256". When you create an int in that
   range you actually just get back a reference to the existing
   object.

PyObject *PyLong_FromUnsignedLong(unsigned long v)
    *Return value: New reference.** Part of the Stable ABI.*

   Return a new "PyLongObject" object from a C unsigned long, or
   "NULL" on failure.

PyObject *PyLong_FromSsize_t(Py_ssize_t v)
    *Return value: New reference.** Part of the Stable ABI.*

   C "Py_ssize_t"로부터 새 "PyLongObject" 객체를 반환하거나, 실패하면
   "NULL"을 반환합니다.

PyObject *PyLong_FromSize_t(size_t v)
    *Return value: New reference.** Part of the Stable ABI.*

   C "size_t"로부터 새 "PyLongObject" 객체를 반환하거나, 실패하면
   "NULL"을 반환합니다.

PyObject *PyLong_FromLongLong(long long v)
    *Return value: New reference.** Part of the Stable ABI.*

   Return a new "PyLongObject" object from a C long long, or "NULL" on
   failure.

PyObject *PyLong_FromUnsignedLongLong(unsigned long long v)
    *Return value: New reference.** Part of the Stable ABI.*

   Return a new "PyLongObject" object from a C unsigned long long, or
   "NULL" on failure.

PyObject *PyLong_FromDouble(double v)
    *Return value: New reference.** Part of the Stable ABI.*

   *v*의 정수 부분으로부터 새 "PyLongObject" 객체를 반환하거나, 실패하
   면 "NULL"을 반환합니다.

PyObject *PyLong_FromString(const char *str, char **pend, int base)
    *Return value: New reference.** Part of the Stable ABI.*

   *str*의 문자열 값을 기반으로 한 새 "PyLongObject"를 반환합니다. 문
   자열 값은 *base*의 진수(기수)에 따라 해석됩니다. *pend*가 "NULL"이
   아니면, **pend*는 숫자 표현의 뒤에 오는 첫 번째 문자를 가리킵니다.
   *base*가 "0"이면, *str*은 정수 리터럴 정의를 사용해서 해석됩니다;
   이때, 0이 아닌 십진수의 선행 0은 "ValueError"를 발생시킵니다.
   *base*가 "0"이 아니면, "2"와 "36" 사이에 있어야 하며, 경계를 포함합
   니다. 선행 공백과 진수 지정자 뒤나 숫자 사이의 단일 밑줄은 무시됩니
   다. 숫자가 없으면 "ValueError"가 발생합니다.

   더 보기:

     Python methods "int.to_bytes()" and "int.from_bytes()" to convert
     a "PyLongObject" to/from an array of bytes in base "256". You can
     call those from C using "PyObject_CallMethod()".

PyObject *PyLong_FromUnicodeObject(PyObject *u, int base)
    *Return value: New reference.*

   문자열 *u*에 있는 유니코드 숫자의 시퀀스를 파이썬 정숫값으로 변환합
   니다.

   버전 3.3에 추가.

PyObject *PyLong_FromVoidPtr(void *p)
    *Return value: New reference.** Part of the Stable ABI.*

   포인터 *p*로부터 파이썬 정수를 만듭니다. 포인터 값은
   "PyLong_AsVoidPtr()"를 사용하여 결괏값에서 조회할 수 있습니다.

long PyLong_AsLong(PyObject *obj)
    * Part of the Stable ABI.*

   Return a C long representation of *obj*.  If *obj* is not an
   instance of "PyLongObject", first call its "__index__()" method (if
   present) to convert it to a "PyLongObject".

   Raise "OverflowError" if the value of *obj* is out of range for a
   long.

   에러 시 "-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를
   사용하십시오.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

long PyLong_AsLongAndOverflow(PyObject *obj, int *overflow)
    * Part of the Stable ABI.*

   Return a C long representation of *obj*.  If *obj* is not an
   instance of "PyLongObject", first call its "__index__()" method (if
   present) to convert it to a "PyLongObject".

   If the value of *obj* is greater than "LONG_MAX" or less than
   "LONG_MIN", set **overflow* to "1" or "-1", respectively, and
   return "-1"; otherwise, set **overflow* to "0".  If any other
   exception occurs set **overflow* to "0" and return "-1" as usual.

   에러 시 "-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를
   사용하십시오.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

long long PyLong_AsLongLong(PyObject *obj)
    * Part of the Stable ABI.*

   Return a C long long representation of *obj*.  If *obj* is not an
   instance of "PyLongObject", first call its "__index__()" method (if
   present) to convert it to a "PyLongObject".

   Raise "OverflowError" if the value of *obj* is out of range for a
   long long.

   에러 시 "-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를
   사용하십시오.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

long long PyLong_AsLongLongAndOverflow(PyObject *obj, int *overflow)
    * Part of the Stable ABI.*

   Return a C long long representation of *obj*.  If *obj* is not an
   instance of "PyLongObject", first call its "__index__()" method (if
   present) to convert it to a "PyLongObject".

   If the value of *obj* is greater than "LLONG_MAX" or less than
   "LLONG_MIN", set **overflow* to "1" or "-1", respectively, and
   return "-1"; otherwise, set **overflow* to "0".  If any other
   exception occurs set **overflow* to "0" and return "-1" as usual.

   에러 시 "-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를
   사용하십시오.

   버전 3.2에 추가.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

Py_ssize_t PyLong_AsSsize_t(PyObject *pylong)
    * Part of the Stable ABI.*

   *pylong*의 C "Py_ssize_t" 표현을 반환합니다. *pylong*은
   "PyLongObject"의 인스턴스여야 합니다.

   *pylong*의 값이 "Py_ssize_t"의 범위를 벗어나면 "OverflowError"를 발
   생시킵니다.

   에러 시 "-1"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"를
   사용하십시오.

unsigned long PyLong_AsUnsignedLong(PyObject *pylong)
    * Part of the Stable ABI.*

   Return a C unsigned long representation of *pylong*.  *pylong* must
   be an instance of "PyLongObject".

   Raise "OverflowError" if the value of *pylong* is out of range for
   a unsigned long.

   에러 시 "(unsigned long)-1"을 반환합니다. 모호성을 제거하려면
   "PyErr_Occurred()"를 사용하십시오.

size_t PyLong_AsSize_t(PyObject *pylong)
    * Part of the Stable ABI.*

   *pylong*의 C "size_t" 표현을 반환합니다. *pylong*은 "PyLongObject"
   의 인스턴스여야 합니다.

   *pylong*의 값이 "size_t"의 범위를 벗어나면 "OverflowError"를 발생시
   킵니다.

   에러 시 "(size_t)-1"을 반환합니다. 모호성을 제거하려면
   "PyErr_Occurred()"를 사용하십시오.

unsigned long long PyLong_AsUnsignedLongLong(PyObject *pylong)
    * Part of the Stable ABI.*

   Return a C unsigned long long representation of *pylong*.  *pylong*
   must be an instance of "PyLongObject".

   Raise "OverflowError" if the value of *pylong* is out of range for
   an unsigned long long.

   에러 시 "(unsigned long long)-1"을 반환합니다. 모호성을 제거하려면
   "PyErr_Occurred()"를 사용하십시오.

   버전 3.1에서 변경: 음의 *pylong*는 이제 "TypeError"가 아니라
   "OverflowError"를 발생시킵니다.

unsigned long PyLong_AsUnsignedLongMask(PyObject *obj)
    * Part of the Stable ABI.*

   Return a C unsigned long representation of *obj*.  If *obj* is not
   an instance of "PyLongObject", first call its "__index__()" method
   (if present) to convert it to a "PyLongObject".

   If the value of *obj* is out of range for an unsigned long, return
   the reduction of that value modulo "ULONG_MAX + 1".

   에러 시 "(unsigned long)-1"을 반환합니다. 모호성을 제거하려면
   "PyErr_Occurred()"를 사용하십시오.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

unsigned long long PyLong_AsUnsignedLongLongMask(PyObject *obj)
    * Part of the Stable ABI.*

   Return a C unsigned long long representation of *obj*.  If *obj* is
   not an instance of "PyLongObject", first call its "__index__()"
   method (if present) to convert it to a "PyLongObject".

   If the value of *obj* is out of range for an unsigned long long,
   return the reduction of that value modulo "ULLONG_MAX + 1".

   에러 시 "(unsigned long long)-1"을 반환합니다. 모호성을 제거하려면
   "PyErr_Occurred()"를 사용하십시오.

   버전 3.8에서 변경: Use "__index__()" if available.

   버전 3.10에서 변경: This function will no longer use "__int__()".

double PyLong_AsDouble(PyObject *pylong)
    * Part of the Stable ABI.*

   Return a C double representation of *pylong*.  *pylong* must be an
   instance of "PyLongObject".

   Raise "OverflowError" if the value of *pylong* is out of range for
   a double.

   에러 시 "-1.0"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"
   를 사용하십시오.

void *PyLong_AsVoidPtr(PyObject *pylong)
    * Part of the Stable ABI.*

   Convert a Python integer *pylong* to a C void pointer. If *pylong*
   cannot be converted, an "OverflowError" will be raised.  This is
   only assured to produce a usable void pointer for values created
   with "PyLong_FromVoidPtr()".

   에러 시 "NULL"을 반환합니다. 모호성을 제거하려면 "PyErr_Occurred()"
   를 사용하십시오.
