8. 복합문(Compound statements)
******************************

복합문은 다른 문장들(의 그룹들)을 포함합니다; 어떤 방법으로 그 다른 문
장들의 실행에 영향을 주거나 제어합니다. 간단하게 표현할 때, 전체 복합
문을 한 줄로 쓸 수 있기는 하지만, 일반적으로 복합문은 여러 줄에 걸칩니
다.

"if", "while", "for" 문장은 전통적인 제어 흐름 구조를 구현합니다. 문장
들의 그룹에 대해 "try" 는 예외 처리기나 정리(cleanup) 코드 또는 그 둘
모두를 지정하는 반면, "with" 문은 코드 블록 주변으로 초기화와 파이널리
제이션 코드를 실행할 수 있도록 합니다. 함수와 클래스 정의 또한 문법적
으로 복합문입니다.

복합문은 하나나 그 이상의 '절'로 구성됩니다. 절은 헤더와 '스위트
(suite)'로 구성됩니다. 특정 복합문의 절 헤더들은 모두 같은 들여쓰기 수
준을 갖습니다. 각 절 헤더는 특별하게 식별되는 키워드로 시작하고 콜론으
로 끝납니다. 스위트는 절에 의해 제어되는 문장들의 그룹입니다. 스위트는
헤더의 콜론 뒤에서 같은 줄에 세미콜론으로 분리된 하나나 그 이상의 단순
문일 수 있습니다. 또는 그다음 줄에 들여쓰기 된 하나나 그 이상의 문장들
일 수도 있습니다. 오직 후자의 형태만 중첩된 복합문을 포함할 수 있습니
다; 다음과 같은 것은 올바르지 않은데, 대체로 뒤따르는 "else" 절이 있다
면 어떤 "if" 절에 속하는지 명확하지 않기 때문입니다.

   if test1: if test2: print(x)

또한, 이 문맥에서 세미콜론이 콜론보다 더 강하게 결합해서, 다음과 같은
예에서, "print()" 호출들은 모두 실행되거나 어느 하나도 실행되지 않습니
다는 것에 주의해야 합니다:

   if x < y < z: print(x); print(y); print(z)

요약하면:

   compound_stmt ::= if_stmt
                     | while_stmt
                     | for_stmt
                     | try_stmt
                     | with_stmt
                     | match_stmt
                     | funcdef
                     | classdef
                     | async_with_stmt
                     | async_for_stmt
                     | async_funcdef
   suite         ::= stmt_list NEWLINE | NEWLINE INDENT statement+ DEDENT
   statement     ::= stmt_list NEWLINE | compound_stmt
   stmt_list     ::= simple_stmt (";" simple_stmt)* [";"]

문장들이 항상 "NEWLINE" 으로 끝나고 "DEDENT" 가 그 뒤를 따를 수 있음에
주목해야 합니다. 또한, 생략 가능한 연결 절들이 항상 문장을 시작시킬 수
없는 키워드로 시작하기 때문에, 모호함이 없다는 것도 주목하세요 (파이썬
에서는 중첩된 "if" 문이 들여쓰기 되는 것을 요구함으로써 '매달린
(dangling) "else"' 문제를 해결합니다).

명확함을 위해 다음에 오는 절들에서 나오는 문법 규칙들은 각 절을 별도의
줄에 놓도록 포매팅합니다.


8.1. "if" 문
============

"if" 문은 조건부 실행에 사용됩니다:

   if_stmt ::= "if" assignment_expression ":" suite
               ("elif" assignment_expression ":" suite)*
               ["else" ":" suite]

참이 되는 것을 발견할 때까지 표현식들의 값을 하나씩 차례대로 구해서 정
확히 하나의 스위트를 선택합니다 (참과 거짓의 정의는 논리 연산(Boolean
operations) 섹션을 보세요); 그런 다음 그 스위트를 실행합니다 (그리고는
"if" 문의 다른 어떤 부분도 실행되거나 값이 구해지지 않습니다). 모든 표
현식들이 거짓이면 "else" 절의 스위트가 (있다면) 실행됩니다.


8.2. "while" 문
===============

"while" 문은 표현식이 참인 동안 실행을 반복하는 데 사용됩니다:

   while_stmt ::= "while" assignment_expression ":" suite
                  ["else" ":" suite]

이것은 표현식을 반복적으로 검사하고, 참이면, 첫 번째 스위트를 실행합니
다; 표현식이 거짓이면 (처음부터 거짓일 수도 있습니다) "else" 절의 스위
트가 (있다면) 실행되고 루프를 종료합니다.

첫 번째 스위트에서 실행되는 "break" 문은 "else" 절을 실행하지 않고 루
프를 종료합니다. 첫 번째 스위트에서 실행되는 "continue" 문은 스위트의
나머지 부분을 건너뛰고 표현식의 검사로 돌아갑니다.


8.3. "for" 문
=============

"for" 문은 (문자열, 튜플, 리스트 같은) 시퀀스 나 다른 이터러블 객체의
요소들을 이터레이트하는데 사용됩니다:

   for_stmt ::= "for" target_list "in" expression_list ":" suite
                ["else" ":" suite]

표현식 목록은 한 번만 값이 구해집니다; 이터러블 객체가 나와야 합니다.
"expression_list" 의 결과로 이터레이터가 만들어집니다. 그런 다음 이터
레이터가 제공하는 항목마다, 이터레이터가 돌려주는 순서대로, 스위트가
한 번씩 실행됩니다. 순환마다 각 항목이 대입의 표준 규칙 (대입문 을 보
세요) 으로 타깃 목록에 대입된 다음, 스위트가 실행됩니다. 항목들이 소진
되었을 때 (이터레이터가 "StopIteration" 예외를 일으킬 때나 빈 시퀀스인
경우는 즉시 발생합니다), the "else" 절의 스위트가 (있다면) 실행되고 루
프를 종료합니다.

첫 번째 스위트에서 실행되는 "break" 문은 "else" 절을 실행하지 않고 루
프를 종료합니다. 첫 번째 스위트에서 실행되는 "continue" 문은 스위트의
나머지 부분을 건너뛰고 다음 항목으로 넘어가거나, 다음 항목이 없으면
"else" 절로 갑니다.

for-루프는 타깃 목록의 변수들에 대입합니다. for-루프의 스위트에서 이루
어진 것들도 포함해서, 그 변수에 앞서 대입된 값들을 모두 덮어씁니다:

   for i in range(10):
       print(i)
       i = 5             # this will not affect the for-loop
                         # because i will be overwritten with the next
                         # index in the range

Names in the target list are not deleted when the loop is finished,
but if the sequence is empty, they will not have been assigned to at
all by the loop.  Hint: the built-in type "range()" represents
immutable arithmetic sequences of integers. For instance, iterating
"range(3)" successively yields 0, 1, and then 2.


8.4. "try" 문
=============

"try" 문은 문장 그룹에 대한 예외 처리기나 정리(cleanup) 코드 또는 그
둘 모두를 지정하는 데 사용됩니다.

   try_stmt  ::= try1_stmt | try2_stmt
   try1_stmt ::= "try" ":" suite
                 ("except" [expression ["as" identifier]] ":" suite)+
                 ["else" ":" suite]
                 ["finally" ":" suite]
   try2_stmt ::= "try" ":" suite
                 "finally" ":" suite

The "except" clause(s) specify one or more exception handlers. When no
exception occurs in the "try" clause, no exception handler is
executed. When an exception occurs in the "try" suite, a search for an
exception handler is started.  This search inspects the except clauses
in turn until one is found that matches the exception.  An expression-
less except clause, if present, must be last; it matches any
exception.  For an except clause with an expression, that expression
is evaluated, and the clause matches the exception if the resulting
object is "compatible" with the exception.  An object is compatible
with an exception if the object is the class or a *non-virtual base
class* of the exception object, or a tuple containing an item that is
the class or a non-virtual base class of the exception object.

except 절 중 어느 것도 예외와 매치되지 않으면, 예외 처리기 검색은 둘러
싼 코드와 호출 스택에서 계속됩니다. [1]

만약 except 절의 헤더에 있는 표현식의 값을 구할 때 예외가 발생하면, 원
래의 처리기 검색은 취소되고 둘러싼 코드와 호출 스택에서 새 예외에 대해
검사가 시작됩니다 ("try" 문 전체가 예외를 일으킨 것으로 취급됩니다).

매치되는 except 절이 발견되면, 예외는 그 except 절에 있는 "as" 키워드
(가 있다면) 뒤에 지정된 타깃에 대입되고, except 절의 스위트가 실행됩니
다. 모든 except 절은 실행 가능한 블록을 가져야 합니다. 블록의 끝에 도
달하면, try 문 전체의 뒤에서 일반적인 실행이 계속됩니다. (이것은 같은
예외에 대해 두 개의 중첩된 처리기가 있고, 예외가 안쪽 처리기의 try 절
에서 발생했다면, 바깥 처리기는 예외를 처리하지 않게 된다는 뜻이 됩니다
.)

예외가 "as target" 을 사용해서 대입될 때, except 절 끝에서 삭제됩니다.
이것은 마치

   except E as N:
       foo

가 이렇게 변환되는 것과 같습니다

   except E as N:
       try:
           foo
       finally:
           del N

이것은 except 절 후에 참조하려면 예외를 다른 이름에 대입해야 한다는 뜻
입니다. 예외를 제거하는 이유는, 그것에 첨부된 트레이스백으로 인해, 스
택 프레임과 참조 순환을 형성해서 다음 가비지 수거가 일어나기 전까지 그
프레임의 모든 지역 변수들을 잡아두기 때문입니다.

Before an except clause's suite is executed, details about the
exception are stored in the "sys" module and can be accessed via
"sys.exc_info()". "sys.exc_info()" returns a 3-tuple consisting of the
exception class, the exception instance and a traceback object (see
section 표준형 계층) identifying the point in the program where the
exception occurred.  The details about the exception accessed via
"sys.exc_info()" are restored to their previous values when leaving an
exception handler:

   >>> print(sys.exc_info())
   (None, None, None)
   >>> try:
   ...     raise TypeError
   ... except:
   ...     print(sys.exc_info())
   ...     try:
   ...          raise ValueError
   ...     except:
   ...         print(sys.exc_info())
   ...     print(sys.exc_info())
   ...
   (<class 'TypeError'>, TypeError(), <traceback object at 0x10efad080>)
   (<class 'ValueError'>, ValueError(), <traceback object at 0x10efad040>)
   (<class 'TypeError'>, TypeError(), <traceback object at 0x10efad080>)
   >>> print(sys.exc_info())
   (None, None, None)

생략 가능한 "else" 절은 제어 흐름이 "try" 스위트를 빠져나가고, 예외가
발생하지 않았고, "return", "continue" 또는 "break" 문이 실행되지 않으
면 실행됩니다. "else" 절에서 발생하는 예외는 앞에 나오는 "except" 절에
서 처리되지 않습니다.

"finally" 가 있으면, '정리(cleanup)' 처리기를 지정합니다. "except" 와
"else" 절을 포함해서, 먼저 "try" 절이 실행됩니다. 이 절들의 어디에서건
예외가 일어나면, 예외는 임시 저장됩니다. "finally" 절이 실행됩니다. 만
약 저장된 예외가 있으면, "finally" 절의 끝에서 다시 발생시킨다.
"finally" 절이 다른 예외를 일으키면, 저장된 예외는 새 예외의 컨텍스트
(context) 로 설정됩니다. "finally" 절이 "return", "break" 또는
"continue" 문을 실행하면, 저장된 예외는 버립니다.

   >>> def f():
   ...     try:
   ...         1/0
   ...     finally:
   ...         return 42
   ...
   >>> f()
   42

"finally" 절을 실행하는 동안 예외 정보는 프로그램에 제공되지 않습니다.

"try"..."finally" 문의 "try" 스위트에서 "return", "break", "continue"
문이 실행될 때, "finally" 절도 '나가는 길에' 실행됩니다.

함수의 반환 값은 마지막에 실행된 "return" 문으로 결정됩니다. "finally"
절이 항상 실행되기 때문에, "finally" 절에서 실행되는 "return" 문이 항
상 마지막에 실행되는 것이 됩니다:

   >>> def foo():
   ...     try:
   ...         return 'try'
   ...     finally:
   ...         return 'finally'
   ...
   >>> foo()
   'finally'

예외에 관한 추가의 정보는 예외 섹션에서 찾을 수 있고, 예외를 일으키기
위해 "raise" 문을 사용하는 것에 관한 정보는 raise 문 섹션에서 찾을 수
있습니다.

버전 3.8에서 변경: 파이썬 3.8 이전에는, "continue" 문이 구현 문제로 인
해 "finally" 절에서 유효하지 않았습니다.


8.5. "with" 문
==============

"with" 문은 블록의 실행을 컨텍스트 관리자 (with 문 컨텍스트 관리자 섹
션을 보세요) 가 정의한 메서드들로 감싸는 데 사용됩니다. 이것은 흔한
"try"..."except"..."finally" 사용 패턴을 편리하게 재사용할 수 있도록
캡슐화할 수 있도록 합니다.

   with_stmt          ::= "with" ( "(" with_stmt_contents ","? ")" | with_stmt_contents ) ":" suite
   with_stmt_contents ::= with_item ("," with_item)*
   with_item          ::= expression ["as" target]

하나의 "item" 을 사용하는 "with" 문의 실행은 다음과 같이 진행됩니다:

1. The context expression (the expression given in the "with_item") is
   evaluated to obtain a context manager.

2. 나중에 사용하기 위해 컨텍스트 관리자의 "__enter__()" 가 로드됩니다.

3. 나중에 사용하기 위해 컨텍스트 관리자의 "__exit__()" 가 로드됩니다.

4. 컨텍스트 관리자의 "__enter__()" 메서드를 호출합니다.

5. "with" 문에 타깃이 포함되었으면, 그것에 "__enter__()" 의 반환 값을
   대입합니다.

   참고:

     The "with" statement guarantees that if the "__enter__()" method
     returns without an error, then "__exit__()" will always be
     called. Thus, if an error occurs during the assignment to the
     target list, it will be treated the same as an error occurring
     within the suite would be. See step 7 below.

6. 스위트가 실행됩니다.

7. 컨텍스트 관리자의 "__exit__()" 메서드를 호출합니다. 예외가 스위트를
   종료되도록 만들었다면, 그것의 형, 값, 트레이스백이 "__exit__()" 의
   인자로 전달됩니다. 그렇지 않으면 세 개의 "None" 이 인자로 공급됩니
   다.

   스위트가 예외 때문에 종료되었고, "__exit__()" 메서드의 반환 값이 거
   짓이면, 그 예외를 다시 일으킨다. 반환 값이 참이면, 예외를 억누르고,
   "with" 문 뒤에 오는 문장으로 실행을 계속합니다.

   스위트가 예외 이외의 이유로 종료되면, "__exit__()" 의 반환 값은 무
   시되고, 해당 종료의 종류에 맞는 위치에서 실행을 계속합니다.

다음과 같은 코드는:

   with EXPRESSION as TARGET:
       SUITE

의미상으로 다음과 동등합니다:

   manager = (EXPRESSION)
   enter = type(manager).__enter__
   exit = type(manager).__exit__
   value = enter(manager)
   hit_except = False

   try:
       TARGET = value
       SUITE
   except:
       hit_except = True
       if not exit(manager, *sys.exc_info()):
           raise
   finally:
       if not hit_except:
           exit(manager, None, None, None)

하나 보다 많은 항목을 주면, 컨텍스트 관리자는 "with" 문이 중첩된 것처
럼 진행합니다:

   with A() as a, B() as b:
       SUITE

의미상으로 다음과 동등합니다:

   with A() as a:
       with B() as b:
           SUITE

You can also write multi-item context managers in multiple lines if
the items are surrounded by parentheses. For example:

   with (
       A() as a,
       B() as b,
   ):
       SUITE

버전 3.1에서 변경: 다중 컨텍스트 표현식의 지원

버전 3.10에서 변경: Support for using grouping parentheses to break
the statement in multiple lines.

더 보기:

  **PEP 343** - "with" 문
     파이썬 "with" 문의 규격, 배경, 예.


8.6. The "match" statement
==========================

버전 3.10에 추가.

The match statement is used for pattern matching.  Syntax:

   match_stmt   ::= 'match' subject_expr ":" NEWLINE INDENT case_block+ DEDENT
   subject_expr ::= star_named_expression "," star_named_expressions?
                    | named_expression
   case_block   ::= 'case' patterns [guard] ":" block

참고:

  This section uses single quotes to denote soft keywords.

Pattern matching takes a pattern as input (following "case") and a
subject value (following "match").  The pattern (which may contain
subpatterns) is matched against the subject value.  The outcomes are:

* A match success or failure (also termed a pattern success or
  failure).

* Possible binding of matched values to a name.  The prerequisites for
  this are further discussed below.

The "match" and "case" keywords are soft keywords.

더 보기:

  * **PEP 634** -- Structural Pattern Matching: Specification

  * **PEP 636** -- Structural Pattern Matching: Tutorial


8.6.1. Overview
---------------

Here's an overview of the logical flow of a match statement:

1. The subject expression "subject_expr" is evaluated and a resulting
   subject value obtained. If the subject expression contains a comma,
   a tuple is constructed using the standard rules.

2. Each pattern in a "case_block" is attempted to match with the
   subject value. The specific rules for success or failure are
   described below. The match attempt can also bind some or all of the
   standalone names within the pattern. The precise pattern binding
   rules vary per pattern type and are specified below.  **Name
   bindings made during a successful pattern match outlive the
   executed block and can be used after the match statement**.

      참고:

        During failed pattern matches, some subpatterns may succeed.
        Do not rely on bindings being made for a failed match.
        Conversely, do not rely on variables remaining unchanged after
        a failed match.  The exact behavior is dependent on
        implementation and may vary.  This is an intentional decision
        made to allow different implementations to add optimizations.

3. If the pattern succeeds, the corresponding guard (if present) is
   evaluated. In this case all name bindings are guaranteed to have
   happened.

   * If the guard evaluates as true or is missing, the "block" inside
     "case_block" is executed.

   * Otherwise, the next "case_block" is attempted as described above.

   * If there are no further case blocks, the match statement is
     completed.

참고:

  Users should generally never rely on a pattern being evaluated.
  Depending on implementation, the interpreter may cache values or use
  other optimizations which skip repeated evaluations.

A sample match statement:

   >>> flag = False
   >>> match (100, 200):
   ...    case (100, 300):  # Mismatch: 200 != 300
   ...        print('Case 1')
   ...    case (100, 200) if flag:  # Successful match, but guard fails
   ...        print('Case 2')
   ...    case (100, y):  # Matches and binds y to 200
   ...        print(f'Case 3, y: {y}')
   ...    case _:  # Pattern not attempted
   ...        print('Case 4, I match anything!')
   ...
   Case 3, y: 200

In this case, "if flag" is a guard.  Read more about that in the next
section.


8.6.2. Guards
-------------

   guard ::= "if" named_expression

A "guard" (which is part of the "case") must succeed for code inside
the "case" block to execute.  It takes the form: "if" followed by an
expression.

The logical flow of a "case" block with a "guard" follows:

1. Check that the pattern in the "case" block succeeded.  If the
   pattern failed, the "guard" is not evaluated and the next "case"
   block is checked.

2. If the pattern succeeded, evaluate the "guard".

   * If the "guard" condition evaluates as true, the case block is
     selected.

   * If the "guard" condition evaluates as false, the case block is
     not selected.

   * If the "guard" raises an exception during evaluation, the
     exception bubbles up.

Guards are allowed to have side effects as they are expressions.
Guard evaluation must proceed from the first to the last case block,
one at a time, skipping case blocks whose pattern(s) don't all
succeed. (I.e., guard evaluation must happen in order.) Guard
evaluation must stop once a case block is selected.


8.6.3. Irrefutable Case Blocks
------------------------------

An irrefutable case block is a match-all case block.  A match
statement may have at most one irrefutable case block, and it must be
last.

A case block is considered irrefutable if it has no guard and its
pattern is irrefutable.  A pattern is considered irrefutable if we can
prove from its syntax alone that it will always succeed.  Only the
following patterns are irrefutable:

* AS Patterns whose left-hand side is irrefutable

* OR Patterns containing at least one irrefutable pattern

* Capture Patterns

* Wildcard Patterns

* parenthesized irrefutable patterns


8.6.4. Patterns
---------------

참고:

  This section uses grammar notations beyond standard EBNF:

  * the notation "SEP.RULE+" is shorthand for "RULE (SEP RULE)*"

  * the notation "!RULE" is shorthand for a negative lookahead
    assertion

The top-level syntax for "patterns" is:

   patterns       ::= open_sequence_pattern | pattern
   pattern        ::= as_pattern | or_pattern
   closed_pattern ::= | literal_pattern
                      | capture_pattern
                      | wildcard_pattern
                      | value_pattern
                      | group_pattern
                      | sequence_pattern
                      | mapping_pattern
                      | class_pattern

The descriptions below will include a description "in simple terms" of
what a pattern does for illustration purposes (credits to Raymond
Hettinger for a document that inspired most of the descriptions). Note
that these descriptions are purely for illustration purposes and **may
not** reflect the underlying implementation.  Furthermore, they do not
cover all valid forms.


8.6.4.1. OR Patterns
~~~~~~~~~~~~~~~~~~~~

An OR pattern is two or more patterns separated by vertical bars "|".
Syntax:

   or_pattern ::= "|".closed_pattern+

Only the final subpattern may be irrefutable, and each subpattern must
bind the same set of names to avoid ambiguity.

An OR pattern matches each of its subpatterns in turn to the subject
value, until one succeeds.  The OR pattern is then considered
successful.  Otherwise, if none of the subpatterns succeed, the OR
pattern fails.

In simple terms, "P1 | P2 | ..." will try to match "P1", if it fails
it will try to match "P2", succeeding immediately if any succeeds,
failing otherwise.


8.6.4.2. AS Patterns
~~~~~~~~~~~~~~~~~~~~

An AS pattern matches an OR pattern on the left of the "as" keyword
against a subject.  Syntax:

   as_pattern ::= or_pattern "as" capture_pattern

If the OR pattern fails, the AS pattern fails.  Otherwise, the AS
pattern binds the subject to the name on the right of the as keyword
and succeeds. "capture_pattern" cannot be a "_".

In simple terms "P as NAME" will match with "P", and on success it
will set "NAME = <subject>".


8.6.4.3. Literal Patterns
~~~~~~~~~~~~~~~~~~~~~~~~~

A literal pattern corresponds to most literals in Python.  Syntax:

   literal_pattern ::= signed_number
                       | signed_number "+" NUMBER
                       | signed_number "-" NUMBER
                       | strings
                       | "None"
                       | "True"
                       | "False"
                       | signed_number: NUMBER | "-" NUMBER

The rule "strings" and the token "NUMBER" are defined in the standard
Python grammar.  Triple-quoted strings are supported.  Raw strings and
byte strings are supported.  포맷 문자열 리터럴 are not supported.

The forms "signed_number '+' NUMBER" and "signed_number '-' NUMBER"
are for expressing complex numbers; they require a real number on the
left and an imaginary number on the right. E.g. "3 + 4j".

In simple terms, "LITERAL" will succeed only if "<subject> ==
LITERAL". For the singletons "None", "True" and "False", the "is"
operator is used.


8.6.4.4. Capture Patterns
~~~~~~~~~~~~~~~~~~~~~~~~~

A capture pattern binds the subject value to a name. Syntax:

   capture_pattern ::= !'_' NAME

A single underscore "_" is not a capture pattern (this is what "!'_'"
expresses). It is instead treated as a "wildcard_pattern".

In a given pattern, a given name can only be bound once.  E.g. "case
x, x: ..." is invalid while "case [x] | x: ..." is allowed.

Capture patterns always succeed.  The binding follows scoping rules
established by the assignment expression operator in **PEP 572**; the
name becomes a local variable in the closest containing function scope
unless there's an applicable "global" or "nonlocal" statement.

In simple terms "NAME" will always succeed and it will set "NAME =
<subject>".


8.6.4.5. Wildcard Patterns
~~~~~~~~~~~~~~~~~~~~~~~~~~

A wildcard pattern always succeeds (matches anything) and binds no
name.  Syntax:

   wildcard_pattern ::= '_'

"_" is a soft keyword within any pattern, but only within patterns.
It is an identifier, as usual, even within "match" subject
expressions, "guard"s, and "case" blocks.

In simple terms, "_" will always succeed.


8.6.4.6. Value Patterns
~~~~~~~~~~~~~~~~~~~~~~~

A value pattern represents a named value in Python. Syntax:

   value_pattern ::= attr
   attr          ::= name_or_attr "." NAME
   name_or_attr  ::= attr | NAME

The dotted name in the pattern is looked up using standard Python name
resolution rules.  The pattern succeeds if the value found compares
equal to the subject value (using the "==" equality operator).

In simple terms "NAME1.NAME2" will succeed only if "<subject> ==
NAME1.NAME2"

참고:

  If the same value occurs multiple times in the same match statement,
  the interpreter may cache the first value found and reuse it rather
  than repeat the same lookup.  This cache is strictly tied to a given
  execution of a given match statement.


8.6.4.7. Group Patterns
~~~~~~~~~~~~~~~~~~~~~~~

A group pattern allows users to add parentheses around patterns to
emphasize the intended grouping.  Otherwise, it has no additional
syntax. Syntax:

   group_pattern ::= "(" pattern ")"

In simple terms "(P)" has the same effect as "P".


8.6.4.8. Sequence Patterns
~~~~~~~~~~~~~~~~~~~~~~~~~~

A sequence pattern contains several subpatterns to be matched against
sequence elements. The syntax is similar to the unpacking of a list or
tuple.

   sequence_pattern       ::= "[" [maybe_sequence_pattern] "]"
                        | "(" [open_sequence_pattern] ")"
   open_sequence_pattern  ::= maybe_star_pattern "," [maybe_sequence_pattern]
   maybe_sequence_pattern ::= ",".maybe_star_pattern+ ","?
   maybe_star_pattern     ::= star_pattern | pattern
   star_pattern           ::= "*" (capture_pattern | wildcard_pattern)

There is no difference if parentheses  or square brackets are used for
sequence patterns (i.e. "(...)" vs "[...]" ).

참고:

  A single pattern enclosed in parentheses without a trailing comma
  (e.g. "(3 | 4)") is a group pattern. While a single pattern enclosed
  in square brackets (e.g. "[3 | 4]") is still a sequence pattern.

At most one star subpattern may be in a sequence pattern.  The star
subpattern may occur in any position. If no star subpattern is
present, the sequence pattern is a fixed-length sequence pattern;
otherwise it is a variable-length sequence pattern.

The following is the logical flow for matching a sequence pattern
against a subject value:

1. If the subject value is not a sequence [2], the sequence pattern
   fails.

2. If the subject value is an instance of "str", "bytes" or
   "bytearray" the sequence pattern fails.

3. The subsequent steps depend on whether the sequence pattern is
   fixed or variable-length.

   If the sequence pattern is fixed-length:

   1. If the length of the subject sequence is not equal to the number
      of subpatterns, the sequence pattern fails

   2. Subpatterns in the sequence pattern are matched to their
      corresponding items in the subject sequence from left to right.
      Matching stops as soon as a subpattern fails.  If all
      subpatterns succeed in matching their corresponding item, the
      sequence pattern succeeds.

   Otherwise, if the sequence pattern is variable-length:

   1. If the length of the subject sequence is less than the number of
      non-star subpatterns, the sequence pattern fails.

   2. The leading non-star subpatterns are matched to their
      corresponding items as for fixed-length sequences.

   3. If the previous step succeeds, the star subpattern matches a
      list formed of the remaining subject items, excluding the
      remaining items corresponding to non-star subpatterns following
      the star subpattern.

   4. Remaining non-star subpatterns are matched to their
      corresponding subject items, as for a fixed-length sequence.

   참고:

     The length of the subject sequence is obtained via "len()" (i.e.
     via the "__len__()" protocol).  This length may be cached by the
     interpreter in a similar manner as value patterns.

In simple terms "[P1, P2, P3," ... ", P<N>]" matches only if all the
following happens:

* check "<subject>" is a sequence

* "len(subject) == <N>"

* "P1" matches "<subject>[0]" (note that this match can also bind
  names)

* "P2" matches "<subject>[1]" (note that this match can also bind
  names)

* ... and so on for the corresponding pattern/element.


8.6.4.9. Mapping Patterns
~~~~~~~~~~~~~~~~~~~~~~~~~

A mapping pattern contains one or more key-value patterns.  The syntax
is similar to the construction of a dictionary. Syntax:

   mapping_pattern     ::= "{" [items_pattern] "}"
   items_pattern       ::= ",".key_value_pattern+ ","?
   key_value_pattern   ::= (literal_pattern | value_pattern) ":" pattern
                         | double_star_pattern
   double_star_pattern ::= "**" capture_pattern

At most one double star pattern may be in a mapping pattern.  The
double star pattern must be the last subpattern in the mapping
pattern.

Duplicate keys in mapping patterns are disallowed. Duplicate literal
keys will raise a "SyntaxError". Two keys that otherwise have the same
value will raise a "ValueError" at runtime.

The following is the logical flow for matching a mapping pattern
against a subject value:

1. If the subject value is not a mapping [3],the mapping pattern
   fails.

2. If every key given in the mapping pattern is present in the subject
   mapping, and the pattern for each key matches the corresponding
   item of the subject mapping, the mapping pattern succeeds.

3. If duplicate keys are detected in the mapping pattern, the pattern
   is considered invalid. A "SyntaxError" is raised for duplicate
   literal values; or a "ValueError" for named keys of the same value.

참고:

  Key-value pairs are matched using the two-argument form of the
  mapping subject's "get()" method.  Matched key-value pairs must
  already be present in the mapping, and not created on-the-fly via
  "__missing__()" or "__getitem__()".

In simple terms "{KEY1: P1, KEY2: P2, ... }" matches only if all the
following happens:

* check "<subject>" is a mapping

* "KEY1 in <subject>"

* "P1" matches "<subject>[KEY1]"

* ... and so on for the corresponding KEY/pattern pair.


8.6.4.10. Class Patterns
~~~~~~~~~~~~~~~~~~~~~~~~

A class pattern represents a class and its positional and keyword
arguments (if any).  Syntax:

   class_pattern       ::= name_or_attr "(" [pattern_arguments ","?] ")"
   pattern_arguments   ::= positional_patterns ["," keyword_patterns]
                         | keyword_patterns
   positional_patterns ::= ",".pattern+
   keyword_patterns    ::= ",".keyword_pattern+
   keyword_pattern     ::= NAME "=" pattern

The same keyword should not be repeated in class patterns.

The following is the logical flow for matching a class pattern against
a subject value:

1. If "name_or_attr" is not an instance of the builtin "type" , raise
   "TypeError".

2. If the subject value is not an instance of "name_or_attr" (tested
   via "isinstance()"), the class pattern fails.

3. If no pattern arguments are present, the pattern succeeds.
   Otherwise, the subsequent steps depend on whether keyword or
   positional argument patterns are present.

   For a number of built-in types (specified below), a single
   positional subpattern is accepted which will match the entire
   subject; for these types keyword patterns also work as for other
   types.

   If only keyword patterns are present, they are processed as
   follows, one by one:

   I. The keyword is looked up as an attribute on the subject.

      * If this raises an exception other than "AttributeError", the
        exception bubbles up.

      * If this raises "AttributeError", the class pattern has failed.

      * Else, the subpattern associated with the keyword pattern is
        matched against the subject's attribute value.  If this fails,
        the class pattern fails; if this succeeds, the match proceeds
        to the next keyword.

   II. If all keyword patterns succeed, the class pattern succeeds.

   If any positional patterns are present, they are converted to
   keyword patterns using the "__match_args__" attribute on the class
   "name_or_attr" before matching:

   I. The equivalent of "getattr(cls, "__match_args__", ())" is
   called.

      * If this raises an exception, the exception bubbles up.

      * If the returned value is not a tuple, the conversion fails and
        "TypeError" is raised.

      * If there are more positional patterns than
        "len(cls.__match_args__)", "TypeError" is raised.

      * Otherwise, positional pattern "i" is converted to a keyword
        pattern using "__match_args__[i]" as the keyword.
        "__match_args__[i]" must be a string; if not "TypeError" is
        raised.

      * If there are duplicate keywords, "TypeError" is raised.

      더 보기: Customizing positional arguments in class pattern matching

   II. Once all positional patterns have been converted to keyword
   patterns,
      the match proceeds as if there were only keyword patterns.

   For the following built-in types the handling of positional
   subpatterns is different:

   * "bool"

   * "bytearray"

   * "bytes"

   * "dict"

   * "float"

   * "frozenset"

   * "int"

   * "list"

   * "set"

   * "str"

   * "tuple"

   These classes accept a single positional argument, and the pattern
   there is matched against the whole object rather than an attribute.
   For example "int(0|1)" matches the value "0", but not the value
   "0.0".

In simple terms "CLS(P1, attr=P2)" matches only if the following
happens:

* "isinstance(<subject>, CLS)"

* convert "P1" to a keyword pattern using "CLS.__match_args__"

* For each keyword argument "attr=P2":
     * "hasattr(<subject>, "attr")"

     * "P2" matches "<subject>.attr"

* ... and so on for the corresponding keyword argument/pattern pair.

더 보기:

  * **PEP 634** -- Structural Pattern Matching: Specification

  * **PEP 636** -- Structural Pattern Matching: Tutorial


8.7. 함수 정의
==============

함수 정의는 사용자 정의 함수 객체 (표준형 계층 섹션을 보세요) 를 정의
합니다:

   funcdef                   ::= [decorators] "def" funcname "(" [parameter_list] ")"
               ["->" expression] ":" suite
   decorators                ::= decorator+
   decorator                 ::= "@" assignment_expression NEWLINE
   parameter_list            ::= defparameter ("," defparameter)* "," "/" ["," [parameter_list_no_posonly]]
                        | parameter_list_no_posonly
   parameter_list_no_posonly ::= defparameter ("," defparameter)* ["," [parameter_list_starargs]]
                                 | parameter_list_starargs
   parameter_list_starargs   ::= "*" [parameter] ("," defparameter)* ["," ["**" parameter [","]]]
                               | "**" parameter [","]
   parameter                 ::= identifier [":" expression]
   defparameter              ::= parameter ["=" expression]
   funcname                  ::= identifier

함수 정의는 실행할 수 있는 문장입니다. 실행하면 현재 지역 이름 공간의
함수 이름을 함수 객체 (함수의 실행 가능한 코드를 둘러싼 래퍼
(wrapper)). 이 함수 객체는 현재의 이름 공간에 대한 참조를 포함하는데,
함수가 호출될 때 전역 이름 공간으로 사용됩니다.

함수 정의는 함수의 바디를 실행하지 않습니다. 함수가 호출될 때 실행됩니
다. [4]

함수 정의는 하나나 그 이상의 *데코레이터* 표현식으로 감싸질 수 있습니
다. 데코레이터 표현식은 함수가 정의될 때, 함수 정의를 포함하는 스코프
에서 값을 구합니다. 그 결과는 콜러블이어야 하는데, 함수 객체만을 인자
로 사용해서 호출됩니다. 반환 값이 함수 객체 대신 함수의 이름에 연결됩
니다. 여러 개의 데코레이터는 중첩되는 방식으로 적용됩니다. 예를 들어,
다음과 같은 코드

   @f1(arg)
   @f2
   def func(): pass

는 대략 다음과 동등합니다

   def func(): pass
   func = f1(arg)(f2(func))

원래의 함수가 임시로 이름 "func" 에 연결되지 않는다는 점만 다릅니다.

버전 3.9에서 변경: Functions may be decorated with any valid
"assignment_expression". Previously, the grammar was much more
restrictive; see **PEP 614** for details.

하나나 그 이상의 *매개변수* 들이 *parameter* "=" *expression* 형태를
가질 때, 함수가 "기본 매개변수 값"을 갖는다고 말합니다. 기본값이 있는
매개변수의 경우, 호출할 때 대응하는 *인자* 를 생략할 수 있고, 그럴 때
매개변수의 기본값이 적용됩니다. 만약 매개변수가 기본값을 가지면, ""*""
까지 그 뒤를 따르는 모든 매개변수도 기본값을 가져야 합니다 --- 이것은
문법 규칙에서 표현되지 않는 문법적 제약입니다.

**Default parameter values are evaluated from left to right when the
function definition is executed.** This means that the expression is
evaluated once, when the function is defined, and that the same "pre-
computed" value is used for each call.  This is especially important
to understand when a default parameter value is a mutable object, such
as a list or a dictionary: if the function modifies the object (e.g.
by appending an item to a list), the default parameter value is in
effect modified.  This is generally not what was intended.  A way
around this is to use "None" as the default, and explicitly test for
it in the body of the function, e.g.:

   def whats_on_the_telly(penguin=None):
       if penguin is None:
           penguin = []
       penguin.append("property of the zoo")
       return penguin

Function call semantics are described in more detail in section 호출.
A function call always assigns values to all parameters mentioned in
the parameter list, either from positional arguments, from keyword
arguments, or from default values.  If the form ""*identifier"" is
present, it is initialized to a tuple receiving any excess positional
parameters, defaulting to the empty tuple. If the form
""**identifier"" is present, it is initialized to a new ordered
mapping receiving any excess keyword arguments, defaulting to a new
empty mapping of the same type.  Parameters after ""*"" or
""*identifier"" are keyword-only parameters and may only be passed by
keyword arguments.  Parameters before ""/"" are positional-only
parameters and may only be passed by positional arguments.

버전 3.8에서 변경: The "/" function parameter syntax may be used to
indicate positional-only parameters. See **PEP 570** for details.

매개변수들은 매개변수 이름 뒤에 오는 "": expression"" 형태의 *어노테이
션*을 가질 수 있습니다. 모든 매개변수는 어노테이션을 가질 수 있는데,
"*identifier" 나 "**identifier" 형태조차 그렇습니다. 함수는 매개변수
목록 뒤에 오는 ""-> expression"" 형태의 반환("return") 어노테이션을 가
질 수 있습니다. 이 어노테이션들은 올바른 파이썬 표현식이면 어떤 것이건
될 수 있습니다. 어노테이션의 존재는 함수의 의미를 바꾸지 않습니다. 어
노테이션 값들은 함수 객체의 "__annotations__" 어트리뷰트에서 매개변수
의 이름을 키로 하는 딕셔너리의 값으로 제공됩니다. "__future__" 에서
"annotations" 을 임포트하면, 지연된 평가가 활성화되어 어노테이션은 실
행시간에 문자열로 보존됩니다. 그렇지 않으면 함수 정의가 실행될 때 평가
됩니다. 이 경우 어노테이션은 소스 코드에 나오는 순서와 다른 순서로 평
가될 수 있습니다.

표현식에서 즉시 사용하기 위해, 이름 없는 함수(이름에 연결되지 않은 함
수)를 만드는 것도 가능합니다. 이것은 람다 표현식을 사용하는데, 람다
(Lambdas) 섹션에서 설명합니다. 람다 표현식은 단순화된 함수 정의를 위한
줄임 표현에 지나지 않는다는 것에 주의하세요; ""def"" 문장에서 정의된
함수는 람다 표현식으로 정의된 함수처럼 전달되거나 다른 이름에 대입될
수 있습니다. 여러 개의 문장을 실행하는 것과 어노테이션을 허락하기 때문
에, ""def"" 형태가 사실 더 강력합니다.

**프로그래머 유의 사항:** 함수는 퍼스트 클래스(first-class) 객체다. 함
수 정의 안에서 실행되는 ""def"" 문은 돌려주거나 전달할 수 있는 지역 함
수를 정의합니다. 중첩된 함수에서 사용되는 자유 변수들은 그 def 를 포함
하는 함수의 지역 변수들을 액세스할 수 있습니다. 더 자세한 내용은 이름
과 연결(binding) 섹션을 보세요.

더 보기:

  **PEP 3107** - 함수 어노테이션
     함수 어노테이션의 최초 규격.

  **PEP 484** - 형 힌트
     어노테이션에 대한 표준 의미 정의: 형 힌트.

  **PEP 526** - 변수 어노테이션 문법
     클래스 변수 및 인스턴스 변수를 포함하는 변수 선언에 형 힌트를 줄
     수 있는 기능

  **PEP 563** - 어노테이션의 지연된 평가
     즉시 평가하는 대신 실행시간에 어노테이션을 문자열 형식으로 보존하
     여 어노테이션 내에서의 전방 참조를 지원합니다.


8.8. 클래스 정의
================

클래스 정의는 클래스 객체(표준형 계층 섹션을 보세요)를 정의합니다:

   classdef    ::= [decorators] "class" classname [inheritance] ":" suite
   inheritance ::= "(" [argument_list] ")"
   classname   ::= identifier

클래스 정의는 실행 가능한 문장입니다. 계승(inheritance) 목록은 보통 베
이스 클래스들의 목록을 제공하는데 (더 고급 사용에 대해서는 메타 클래스
를 보세요), 목록의 각 항목은 값을 구할 때 서브 클래싱을 허락하는 클래
스 객체가 되어야 합니다. 계승 목록이 없는 클래스는, 기본적으로, 베이스
클래스 "object" 를 계승합니다; 그래서

   class Foo:
       pass

는 다음과 동등합니다

   class Foo(object):
       pass

클래스의 스위트는 새로 만들어진 지역 이름 공간과 원래의 전역 이름 공간
을 사용하는 새 실행 프레임 (이름과 연결(binding) 을 보세요)에서 실행됩
니다. (보통, 스위트는 대부분 함수 정의들을 포함합니다.) 클래스의 스위
트가 실행을 마치면, 실행 프레임은 파기하지만, 그것의 지역 이름 공간은
보존합니다. [5] 그런 다음, 계승 목록을 베이스 클래스들로, 보존된 지역
이름 공간을 어트리뷰트 딕셔너리로 사용해서 새 클래스 객체를 만듭니다.
클래스의 이름은 원래의 지역 이름 공간에서 이 클래스 객체와 연결됩니다.

클래스 바디에서 어트리뷰트가 정의되는 순서는, 새 클래스의 "__dict__"
에 보존됩니다. 이것은 클래스가 만들어진 직후에, 정의 문법을 사용해서
정의되는 클래스들에서만 신뢰할 수 있다는 것에 주의해야 합니다.

클래스 생성은 메타 클래스 를 사용해서 심하게 커스터마이즈할 수 있습니
다.

클래스 역시 함수를 데코레이팅할 때처럼 테코레이트할 수 있습니다,

   @f1(arg)
   @f2
   class Foo: pass

는 대략 다음과 동등합니다

   class Foo: pass
   Foo = f1(arg)(f2(Foo))

데코레이터 표현식의 값을 구하는 규칙은 함수 데코레이터와 같습니다. 그
런 다음 그 결과가 클래스 이름에 연결됩니다.

버전 3.9에서 변경: Classes may be decorated with any valid
"assignment_expression". Previously, the grammar was much more
restrictive; see **PEP 614** for details.

**프로그래머 유의 사항:** 클래스 정의에서 정의되는 변수들은 클래스 어
트리뷰트입니다; 이것들은 인스턴스 간에 공유됩니다. 인스턴스 어트리뷰트
는 메서드에서 "self.name = value" 로 설정될 수 있습니다. 클래스와 인스
턴스 어트리뷰트 모두 ""self.name"" 표기법으로 액세스할 수 있고, 이런
식으로 액세스할 때 인스턴스 어트리뷰트는 같은 이름의 클래스 어트리뷰트
를 가립니다. 클래스 어트리뷰트는 인스턴스 어트리뷰트의 기본값으로 사용
될 수 있지만, 가변 값을 사용하는 것은 예상하지 않은 결과를 줄 수 있습
니다. 디스크립터 를 다른 구현 상세를 갖는 인스턴스 변수를 만드는데 사
용할 수 있습니다.

더 보기:

  **PEP 3115** - 파이썬 3000의 메타 클래스
     메타 클래스 선언을 현재 문법으로 변경하고, 메타 클래스가 있는 클
     래스를 구성하는 방법의 의미를 변경하는 제안.

  **PEP 3129** - 클래스 데코레이터
     클래스 데코레이터를 추가하는 제안. 함수와 메서드 데코레이터는
     **PEP 318**에서 도입되었습니다.


8.9. 코루틴
===========

버전 3.5에 추가.


8.9.1. 코루틴 함수 정의
-----------------------

   async_funcdef ::= [decorators] "async" "def" funcname "(" [parameter_list] ")"
                     ["->" expression] ":" suite

Execution of Python coroutines can be suspended and resumed at many
points (see *coroutine*). "await" expressions, "async for" and "async
with" can only be used in the body of a coroutine function.

"async def" 문법으로 정의된 함수는 항상 코루틴 함수인데, "await" 나
"async" 키워드를 포함하지 않는 경우도 그렇습니다.

코루틴 함수의 바디 안에서 "yield from" 표현식을 사용하는 것은
"SyntaxError" 입니다.

코루틴 함수의 예:

   async def func(param1, param2):
       do_stuff()
       await some_coroutine()

버전 3.7에서 변경: "await" and "async" are now keywords; previously
they were only treated as such inside the body of a coroutine
function.


8.9.2. "async for" 문
---------------------

   async_for_stmt ::= "async" for_stmt

*비동기 이터러블* 은 *비동기 이터레이터* 를 직접 반환하는 "__aiter__"
메서드를 제공하고, 비동기 이터레이터는 자신의 "__anext__" 메서드에서
비동기 코드를 호출할 수 있습니다.

"async for" 문은 비동기 이터러블에 대한 편리한 이터레이션을 허락합니다
.

다음과 같은 코드는:

   async for TARGET in ITER:
       SUITE
   else:
       SUITE2

의미상으로 다음과 동등합니다:

   iter = (ITER)
   iter = type(iter).__aiter__(iter)
   running = True

   while running:
       try:
           TARGET = await type(iter).__anext__(iter)
       except StopAsyncIteration:
           running = False
       else:
           SUITE
   else:
       SUITE2

See also "__aiter__()" and "__anext__()" for details.

코루틴 함수의 바디 밖에서 "async for" 문을 사용하는 것은 "SyntaxError"
입니다.


8.9.3. "async with" 문
----------------------

   async_with_stmt ::= "async" with_stmt

*비동기 컨텍스트 관리자* 는 *enter* 와 *exit* 메서드에서 실행을 일시
중지할 수 있는 *컨텍스트 관리자* 입니다.

다음과 같은 코드는:

   async with EXPRESSION as TARGET:
       SUITE

의미상으로 다음과 동등합니다:

   manager = (EXPRESSION)
   aenter = type(manager).__aenter__
   aexit = type(manager).__aexit__
   value = await aenter(manager)
   hit_except = False

   try:
       TARGET = value
       SUITE
   except:
       hit_except = True
       if not await aexit(manager, *sys.exc_info()):
           raise
   finally:
       if not hit_except:
           await aexit(manager, None, None, None)

See also "__aenter__()" and "__aexit__()" for details.

코루틴 함수의 바디 밖에서 "async with" 문을 사용하는 것은
"SyntaxError" 입니다.

더 보기:

  **PEP 492** - async 와 await 문법을 사용하는 코루틴
     코루틴을 파이썬에서 적절한 독립적인 개념으로 만들고, 문법 지원을
     추가한 제안.

-[ 각주 ]-

[1] 다른 예외를 일으키는 "finally" 절이 있지 않은 한 예외는 호출 스택
    으로 퍼집니다. 그 새 예외는 예전의 것을 잃어버리게 만듭니다.

[2] In pattern matching, a sequence is defined as one of the
    following:

       * a class that inherits from "collections.abc.Sequence"

       * a Python class that has been registered as
         "collections.abc.Sequence"

       * a builtin class that has its (CPython) "Py_TPFLAGS_SEQUENCE"
         bit set

       * a class that inherits from any of the above

    The following standard library classes are sequences:

       * "array.array"

       * "collections.deque"

       * "list"

       * "memoryview"

       * "range"

       * "tuple"

    참고:

      Subject values of type "str", "bytes", and "bytearray" do not
      match sequence patterns.

[3] In pattern matching, a mapping is defined as one of the following:

       * a class that inherits from "collections.abc.Mapping"

       * a Python class that has been registered as
         "collections.abc.Mapping"

       * a builtin class that has its (CPython) "Py_TPFLAGS_MAPPING"
         bit set

       * a class that inherits from any of the above

    The standard library classes "dict" and "types.MappingProxyType"
    are mappings.

[4] 함수 바디의 첫 번째 문장으로 등장하는 문자열 리터럴은 함수의
    "__doc__" 어트리뷰트로 변환되어 함수의 *독스트링* 이 됩니다.

[5] 클래스 바디의 첫 번째 문장으로 등장하는 문자열 리터럴은 그 이름 공
    간의 "__doc__" 항목으로 변환되어 클래스의 *독스트링* 이 됩니다.
