"bisect" --- Array bisection algorithm
**************************************

**ソースコード:** Lib/bisect.py

======================================================================

This module provides support for maintaining a list in sorted order
without having to sort the list after each insertion.  For long lists
of items with expensive comparison operations, this can be an
improvement over the more common approach.  The module is called
"bisect" because it uses a basic bisection algorithm to do its work.
The source code may be most useful as a working example of the
algorithm (the boundary conditions are already right!).

次の関数が用意されています:

bisect.bisect_left(a, x, lo=0, hi=len(a), *, key=None)

   ソートされた順序を保ったまま *x* を *a* に挿入できる点を探し当てま
   す。リストの中から検索する部分集合を指定するには、パラメータの *lo*
   と *hi* を使います。デフォルトでは、リスト全体が使われます。*x* が
   すでに *a* に含まれている場合、挿入点は既存のどのエントリーよりも前
   (左)になります。戻り値は、"list.insert()" の第一引数として使うのに
   適しています。*a* はすでにソートされているものとします。

   The returned insertion point *i* partitions the array *a* into two
   halves so that "all(val < x for val in a[lo : i])" for the left
   side and "all(val >= x for val in a[i : hi])" for the right side.

   *key* specifies a *key function* of one argument that is used to
   extract a comparison key from each element in the array.  To
   support searching complex records, the key function is not applied
   to the *x* value.

   If *key* is "None", the elements are compared directly with no
   intervening function call.

   バージョン 3.10 で変更: *key* パラメータが追加されました。

bisect.bisect_right(a, x, lo=0, hi=len(a), *, key=None)
bisect.bisect(a, x, lo=0, hi=len(a), *, key=None)

   Similar to "bisect_left()", but returns an insertion point which
   comes after (to the right of) any existing entries of *x* in *a*.

   The returned insertion point *i* partitions the array *a* into two
   halves so that "all(val <= x for val in a[lo : i])" for the left
   side and "all(val > x for val in a[i : hi])" for the right side.

   *key* specifies a *key function* of one argument that is used to
   extract a comparison key from each element in the array.  To
   support searching complex records, the key function is not applied
   to the *x* value.

   If *key* is "None", the elements are compared directly with no
   intervening function call.

   バージョン 3.10 で変更: *key* パラメータが追加されました。

bisect.insort_left(a, x, lo=0, hi=len(a), *, key=None)

   *x* を *a* にソート順で挿入します。

   This function first runs "bisect_left()" to locate an insertion
   point. Next, it runs the "insert()" method on *a* to insert *x* at
   the appropriate position to maintain sort order.

   To support inserting records in a table, the *key* function (if
   any) is applied to *x* for the search step but not for the
   insertion step.

   Keep in mind that the *O*(log *n*) search is dominated by the slow
   *O*(*n*) insertion step.

   バージョン 3.10 で変更: *key* パラメータが追加されました。

bisect.insort_right(a, x, lo=0, hi=len(a), *, key=None)
bisect.insort(a, x, lo=0, hi=len(a), *, key=None)

   Similar to "insort_left()", but inserting *x* in *a* after any
   existing entries of *x*.

   This function first runs "bisect_right()" to locate an insertion
   point. Next, it runs the "insert()" method on *a* to insert *x* at
   the appropriate position to maintain sort order.

   To support inserting records in a table, the *key* function (if
   any) is applied to *x* for the search step but not for the
   insertion step.

   Keep in mind that the *O*(log *n*) search is dominated by the slow
   *O*(*n*) insertion step.

   バージョン 3.10 で変更: *key* パラメータが追加されました。


パフォーマンスに関するメモ
==========================

When writing time sensitive code using *bisect()* and *insort()*, keep
these thoughts in mind:

* Bisection is effective for searching ranges of values. For locating
  specific values, dictionaries are more performant.

* The *insort()* functions are *O*(*n*) because the logarithmic search
  step is dominated by the linear time insertion step.

* The search functions are stateless and discard key function results
  after they are used.  Consequently, if the search functions are used
  in a loop, the key function may be called again and again on the
  same array elements. If the key function isn't fast, consider
  wrapping it with "functools.cache()" to avoid duplicate
  computations.  Alternatively, consider searching an array of
  precomputed keys to locate the insertion point (as shown in the
  examples section below).

参考:

  * Sorted Collections is a high performance module that uses *bisect*
    to managed sorted collections of data.

  * bisect を利用して、直接の探索ができ、キー関数をサポートする、完全
    な機能を持つコレクションクラスを組み立てる SortedCollection recipe
    。キーは、探索中に不必要な呼び出しをさせないために、予め計算してお
    きます。


ソート済みリストの探索
======================

The above bisect functions are useful for finding insertion points but
can be tricky or awkward to use for common searching tasks. The
following five functions show how to transform them into the standard
lookups for sorted lists:

   def index(a, x):
       'Locate the leftmost value exactly equal to x'
       i = bisect_left(a, x)
       if i != len(a) and a[i] == x:
           return i
       raise ValueError

   def find_lt(a, x):
       'Find rightmost value less than x'
       i = bisect_left(a, x)
       if i:
           return a[i-1]
       raise ValueError

   def find_le(a, x):
       'Find rightmost value less than or equal to x'
       i = bisect_right(a, x)
       if i:
           return a[i-1]
       raise ValueError

   def find_gt(a, x):
       'Find leftmost value greater than x'
       i = bisect_right(a, x)
       if i != len(a):
           return a[i]
       raise ValueError

   def find_ge(a, x):
       'Find leftmost item greater than or equal to x'
       i = bisect_left(a, x)
       if i != len(a):
           return a[i]
       raise ValueError


使用例
======

The "bisect()" function can be useful for numeric table lookups. This
example uses "bisect()" to look up a letter grade for an exam score
(say) based on a set of ordered numeric breakpoints: 90 and up is an
'A', 80 to 89 is a 'B', and so on:

   >>> def grade(score, breakpoints=[60, 70, 80, 90], grades='FDCBA'):
   ...     i = bisect(breakpoints, score)
   ...     return grades[i]
   ...
   >>> [grade(score) for score in [33, 99, 77, 70, 89, 90, 100]]
   ['F', 'A', 'C', 'C', 'B', 'A', 'A']

The "bisect()" and "insort()" functions also work with lists of
tuples.  The *key* argument can serve to extract the field used for
ordering records in a table:

   >>> from collections import namedtuple
   >>> from operator import attrgetter
   >>> from bisect import bisect, insort
   >>> from pprint import pprint

   >>> Movie = namedtuple('Movie', ('name', 'released', 'director'))

   >>> movies = [
   ...     Movie('Jaws', 1975, 'Spielberg'),
   ...     Movie('Titanic', 1997, 'Cameron'),
   ...     Movie('The Birds', 1963, 'Hitchcock'),
   ...     Movie('Aliens', 1986, 'Cameron')
   ... ]

   >>> # Find the first movie released after 1960
   >>> by_year = attrgetter('released')
   >>> movies.sort(key=by_year)
   >>> movies[bisect(movies, 1960, key=by_year)]
   Movie(name='The Birds', released=1963, director='Hitchcock')

   >>> # Insert a movie while maintaining sort order
   >>> romance = Movie('Love Story', 1970, 'Hiller')
   >>> insort(movies, romance, key=by_year)
   >>> pprint(movies)
   [Movie(name='The Birds', released=1963, director='Hitchcock'),
    Movie(name='Love Story', released=1970, director='Hiller'),
    Movie(name='Jaws', released=1975, director='Spielberg'),
    Movie(name='Aliens', released=1986, director='Cameron'),
    Movie(name='Titanic', released=1997, director='Cameron')]

If the key function is expensive, it is possible to avoid repeated
function calls by searching a list of precomputed keys to find the
index of a record:

   >>> data = [('red', 5), ('blue', 1), ('yellow', 8), ('black', 0)]
   >>> data.sort(key=lambda r: r[1])       # Or use operator.itemgetter(1).
   >>> keys = [r[1] for r in data]         # Precompute a list of keys.
   >>> data[bisect_left(keys, 0)]
   ('black', 0)
   >>> data[bisect_left(keys, 1)]
   ('blue', 1)
   >>> data[bisect_left(keys, 5)]
   ('red', 5)
   >>> data[bisect_left(keys, 8)]
   ('yellow', 8)
