Pemrograman Fungsional HOWTO¶
- Penulis
A. M. Kuchling
- Rilis
0.32
Dalam dokumen ini, kita akan membahas fitur Python yang cocok untuk menerapkan program dalam gaya fungsional. Setelah pengenalan konsep pemrograman fungsional, kita akan membahas fitur bahasa seperti iterators dan generators dan modul library seperti itertools
dan functools
.
Pengenalan¶
This section explains the basic concept of functional programming; if you're just interested in learning about Python language features, skip to the next section on Iterators.
Bahasa pemrograman mendukung pemecahan masalah dalam beberapa cara berbeda :
Kebanyakan bahasa pemrograman adalah procedural: Program merupakan daftar instruksi yang memberitahukan kepada komputer apa yang harus dilakukan dengan masukan program. C, Pascal dan bahkan Unix shells merupakan bahasa prosedural.
In declarative languages, you write a specification that describes the problem to be solved, and the language implementation figures out how to perform the computation efficiently. SQL is the declarative language you're most likely to be familiar with; a SQL query describes the data set you want to retrieve, and the SQL engine decides whether to scan tables or use indexes, which subclauses should be performed first, etc.
Object-oriented programs manipulate collections of objects. Objects have internal state and support methods that query or modify this internal state in some way. Smalltalk and Java are object-oriented languages. C++ and Python are languages that support object-oriented programming, but don't force the use of object-oriented features.
Functional programming decomposes a problem into a set of functions. Ideally, functions only take inputs and produce outputs, and don't have any internal state that affects the output produced for a given input. Well-known functional languages include the ML family (Standard ML, OCaml, and other variants) and Haskell.
The designers of some computer languages choose to emphasize one particular approach to programming. This often makes it difficult to write programs that use a different approach. Other languages are multi-paradigm languages that support several different approaches. Lisp, C++, and Python are multi-paradigm; you can write programs or libraries that are largely procedural, object-oriented, or functional in all of these languages. In a large program, different sections might be written using different approaches; the GUI might be object-oriented while the processing logic is procedural or functional, for example.
In a functional program, input flows through a set of functions. Each function operates on its input and produces some output. Functional style discourages functions with side effects that modify internal state or make other changes that aren't visible in the function's return value. Functions that have no side effects at all are called purely functional. Avoiding side effects means not using data structures that get updated as a program runs; every function's output must only depend on its input.
Some languages are very strict about purity and don't even have assignment
statements such as a=3
or c = a + b
, but it's difficult to avoid all
side effects. Printing to the screen or writing to a disk file are side
effects, for example. For example, in Python a call to the print()
or
time.sleep()
function both return no useful value; they're only called for
their side effects of sending some text to the screen or pausing execution for a
second.
Python programs written in functional style usually won't go to the extreme of avoiding all I/O or all assignments; instead, they'll provide a functional-appearing interface but will use non-functional features internally. For example, the implementation of a function will still use assignments to local variables, but won't modify global variables or have other side effects.
Functional programming can be considered the opposite of object-oriented programming. Objects are little capsules containing some internal state along with a collection of method calls that let you modify this state, and programs consist of making the right set of state changes. Functional programming wants to avoid state changes as much as possible and works with data flowing between functions. In Python you might combine the two approaches by writing functions that take and return instances representing objects in your application (e-mail messages, transactions, etc.).
Functional design may seem like an odd constraint to work under. Why should you avoid objects and side effects? There are theoretical and practical advantages to the functional style:
Formal provability.
Modularity.
Composability.
Memudahkan dalam debugging dan testing.
Formal provability¶
A theoretical benefit is that it's easier to construct a mathematical proof that a functional program is correct.
For a long time researchers have been interested in finding ways to mathematically prove programs correct. This is different from testing a program on numerous inputs and concluding that its output is usually correct, or reading a program's source code and concluding that the code looks right; the goal is instead a rigorous proof that a program produces the right result for all possible inputs.
The technique used to prove programs correct is to write down invariants, properties of the input data and of the program's variables that are always true. For each line of code, you then show that if invariants X and Y are true before the line is executed, the slightly different invariants X' and Y' are true after the line is executed. This continues until you reach the end of the program, at which point the invariants should match the desired conditions on the program's output.
Functional programming's avoidance of assignments arose because assignments are difficult to handle with this technique; assignments can break invariants that were true before the assignment without producing any new invariants that can be propagated onward.
Unfortunately, proving programs correct is largely impractical and not relevant to Python software. Even trivial programs require proofs that are several pages long; the proof of correctness for a moderately complicated program would be enormous, and few or none of the programs you use daily (the Python interpreter, your XML parser, your web browser) could be proven correct. Even if you wrote down or generated a proof, there would then be the question of verifying the proof; maybe there's an error in it, and you wrongly believe you've proved the program correct.
Modularity¶
A more practical benefit of functional programming is that it forces you to break apart your problem into small pieces. Programs are more modular as a result. It's easier to specify and write a small function that does one thing than a large function that performs a complicated transformation. Small functions are also easier to read and to check for errors.
Ease of debugging and testing¶
Testing and debugging a functional-style program is easier.
Debugging is simplified because functions are generally small and clearly specified. When a program doesn't work, each function is an interface point where you can check that the data are correct. You can look at the intermediate inputs and outputs to quickly isolate the function that's responsible for a bug.
Testing is easier because each function is a potential subject for a unit test. Functions don't depend on system state that needs to be replicated before running a test; instead you only have to synthesize the right input and then check that the output matches expectations.
Composability¶
As you work on a functional-style program, you'll write a number of functions with varying inputs and outputs. Some of these functions will be unavoidably specialized to a particular application, but others will be useful in a wide variety of programs. For example, a function that takes a directory path and returns all the XML files in the directory, or a function that takes a filename and returns its contents, can be applied to many different situations.
Over time you'll form a personal library of utilities. Often you'll assemble new programs by arranging existing functions in a new configuration and writing a few functions specialized for the current task.
Iterators¶
I'll start by looking at a Python language feature that's an important foundation for writing functional-style programs: iterators.
An iterator is an object representing a stream of data; this object returns the
data one element at a time. A Python iterator must support a method called
__next__()
that takes no arguments and always returns the next
element of the stream. If there are no more elements in the stream,
__next__()
must raise the StopIteration
exception.
Iterators don't have to be finite, though; it's perfectly reasonable to write
an iterator that produces an infinite stream of data.
The built-in iter()
function takes an arbitrary object and tries to return
an iterator that will return the object's contents or elements, raising
TypeError
if the object doesn't support iteration. Several of Python's
built-in data types support iteration, the most common being lists and
dictionaries. An object is called iterable if you can get an iterator
for it.
You can experiment with the iteration interface manually:
>>> L = [1, 2, 3]
>>> it = iter(L)
>>> it
<...iterator object at ...>
>>> it.__next__() # same as next(it)
1
>>> next(it)
2
>>> next(it)
3
>>> next(it)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
StopIteration
>>>
Python expects iterable objects in several different contexts, the most
important being the for
statement. In the statement for X in Y
,
Y must be an iterator or some object for which iter()
can create an
iterator. These two statements are equivalent:
for i in iter(obj):
print(i)
for i in obj:
print(i)
Iterators can be materialized as lists or tuples by using the list()
or
tuple()
constructor functions:
>>> L = [1, 2, 3]
>>> iterator = iter(L)
>>> t = tuple(iterator)
>>> t
(1, 2, 3)
Sequence unpacking also supports iterators: if you know an iterator will return N elements, you can unpack them into an N-tuple:
>>> L = [1, 2, 3]
>>> iterator = iter(L)
>>> a, b, c = iterator
>>> a, b, c
(1, 2, 3)
Built-in functions such as max()
and min()
can take a single
iterator argument and will return the largest or smallest element. The "in"
and "not in"
operators also support iterators: X in iterator
is true if
X is found in the stream returned by the iterator. You'll run into obvious
problems if the iterator is infinite; max()
, min()
will never return, and if the element X never appears in the stream, the
"in"
and "not in"
operators won't return either.
Note that you can only go forward in an iterator; there's no way to get the
previous element, reset the iterator, or make a copy of it. Iterator objects
can optionally provide these additional capabilities, but the iterator protocol
only specifies the __next__()
method. Functions may therefore
consume all of the iterator's output, and if you need to do something different
with the same stream, you'll have to create a new iterator.
Data Types That Support Iterators¶
We've already seen how lists and tuples support iterators. In fact, any Python sequence type, such as strings, will automatically support creation of an iterator.
Calling iter()
on a dictionary returns an iterator that will loop over the
dictionary's keys:
>>> m = {'Jan': 1, 'Feb': 2, 'Mar': 3, 'Apr': 4, 'May': 5, 'Jun': 6,
... 'Jul': 7, 'Aug': 8, 'Sep': 9, 'Oct': 10, 'Nov': 11, 'Dec': 12}
>>> for key in m:
... print(key, m[key])
Mar 3
Feb 2
Aug 8
Sep 9
Apr 4
Jun 6
Jul 7
Jan 1
May 5
Nov 11
Dec 12
Oct 10
Note that the order is essentially random, because it's based on the hash ordering of the objects in the dictionary.
Applying iter()
to a dictionary always loops over the keys, but
dictionaries have methods that return other iterators. If you want to iterate
over values or key/value pairs, you can explicitly call the
values()
or items()
methods to get an appropriate
iterator.
The dict()
constructor can accept an iterator that returns a finite stream
of (key, value)
tuples:
>>> L = [('Italy', 'Rome'), ('France', 'Paris'), ('US', 'Washington DC')]
>>> dict(iter(L))
{'Italy': 'Rome', 'US': 'Washington DC', 'France': 'Paris'}
Files also support iteration by calling the readline()
method until there are no more lines in the file. This means you can read each
line of a file like this:
for line in file:
# do something for each line
...
Sets can take their contents from an iterable and let you iterate over the set's elements:
S = {2, 3, 5, 7, 11, 13}
for i in S:
print(i)
Generator expressions and list comprehensions¶
Two common operations on an iterator's output are 1) performing some operation for every element, 2) selecting a subset of elements that meet some condition. For example, given a list of strings, you might want to strip off trailing whitespace from each line or extract all the strings containing a given substring.
List comprehensions and generator expressions (short form: "listcomps" and "genexps") are a concise notation for such operations, borrowed from the functional programming language Haskell (https://www.haskell.org/). You can strip all the whitespace from a stream of strings with the following code:
line_list = [' line 1\n', 'line 2 \n', ...]
# Generator expression -- returns iterator
stripped_iter = (line.strip() for line in line_list)
# List comprehension -- returns list
stripped_list = [line.strip() for line in line_list]
You can select only certain elements by adding an "if"
condition:
stripped_list = [line.strip() for line in line_list
if line != ""]
With a list comprehension, you get back a Python list; stripped_list
is a
list containing the resulting lines, not an iterator. Generator expressions
return an iterator that computes the values as necessary, not needing to
materialize all the values at once. This means that list comprehensions aren't
useful if you're working with iterators that return an infinite stream or a very
large amount of data. Generator expressions are preferable in these situations.
Generator expressions are surrounded by parentheses ("()") and list comprehensions are surrounded by square brackets ("[]"). Generator expressions have the form:
( expression for expr in sequence1
if condition1
for expr2 in sequence2
if condition2
for expr3 in sequence3 ...
if condition3
for exprN in sequenceN
if conditionN )
Again, for a list comprehension only the outside brackets are different (square brackets instead of parentheses).
The elements of the generated output will be the successive values of
expression
. The if
clauses are all optional; if present, expression
is only evaluated and added to the result when condition
is true.
Generator expressions always have to be written inside parentheses, but the parentheses signalling a function call also count. If you want to create an iterator that will be immediately passed to a function you can write:
obj_total = sum(obj.count for obj in list_all_objects())
The for...in
clauses contain the sequences to be iterated over. The
sequences do not have to be the same length, because they are iterated over from
left to right, not in parallel. For each element in sequence1
,
sequence2
is looped over from the beginning. sequence3
is then looped
over for each resulting pair of elements from sequence1
and sequence2
.
To put it another way, a list comprehension or generator expression is equivalent to the following Python code:
for expr1 in sequence1:
if not (condition1):
continue # Skip this element
for expr2 in sequence2:
if not (condition2):
continue # Skip this element
...
for exprN in sequenceN:
if not (conditionN):
continue # Skip this element
# Output the value of
# the expression.
This means that when there are multiple for...in
clauses but no if
clauses, the length of the resulting output will be equal to the product of the
lengths of all the sequences. If you have two lists of length 3, the output
list is 9 elements long:
>>> seq1 = 'abc'
>>> seq2 = (1, 2, 3)
>>> [(x, y) for x in seq1 for y in seq2]
[('a', 1), ('a', 2), ('a', 3),
('b', 1), ('b', 2), ('b', 3),
('c', 1), ('c', 2), ('c', 3)]
To avoid introducing an ambiguity into Python's grammar, if expression
is
creating a tuple, it must be surrounded with parentheses. The first list
comprehension below is a syntax error, while the second one is correct:
# Syntax error
[x, y for x in seq1 for y in seq2]
# Correct
[(x, y) for x in seq1 for y in seq2]
Pembangkit Generator¶
Generators are a special class of functions that simplify the task of writing iterators. Regular functions compute a value and return it, but generators return an iterator that returns a stream of values.
You're doubtless familiar with how regular function calls work in Python or C.
When you call a function, it gets a private namespace where its local variables
are created. When the function reaches a return
statement, the local
variables are destroyed and the value is returned to the caller. A later call
to the same function creates a new private namespace and a fresh set of local
variables. But, what if the local variables weren't thrown away on exiting a
function? What if you could later resume the function where it left off? This
is what generators provide; they can be thought of as resumable functions.
Here's the simplest example of a generator function:
>>> def generate_ints(N):
... for i in range(N):
... yield i
Any function containing a yield
keyword is a generator function;
this is detected by Python's bytecode compiler which compiles the
function specially as a result.
When you call a generator function, it doesn't return a single value; instead it
returns a generator object that supports the iterator protocol. On executing
the yield
expression, the generator outputs the value of i
, similar to a
return
statement. The big difference between yield
and a return
statement is that on reaching a yield
the generator's state of execution is
suspended and local variables are preserved. On the next call to the
generator's __next__()
method, the function will resume
executing.
Here's a sample usage of the generate_ints()
generator:
>>> gen = generate_ints(3)
>>> gen
<generator object generate_ints at ...>
>>> next(gen)
0
>>> next(gen)
1
>>> next(gen)
2
>>> next(gen)
Traceback (most recent call last):
File "stdin", line 1, in <module>
File "stdin", line 2, in generate_ints
StopIteration
You could equally write for i in generate_ints(5)
, or a, b, c =
generate_ints(3)
.
Inside a generator function, return value
causes StopIteration(value)
to be raised from the __next__()
method. Once this happens, or
the bottom of the function is reached, the procession of values ends and the
generator cannot yield any further values.
You could achieve the effect of generators manually by writing your own class
and storing all the local variables of the generator as instance variables. For
example, returning a list of integers could be done by setting self.count
to
0, and having the __next__()
method increment self.count
and
return it.
However, for a moderately complicated generator, writing a corresponding class
can be much messier.
The test suite included with Python's library, Lib/test/test_generators.py, contains a number of more interesting examples. Here's one generator that implements an in-order traversal of a tree using generators recursively.
# A recursive generator that generates Tree leaves in in-order.
def inorder(t):
if t:
for x in inorder(t.left):
yield x
yield t.label
for x in inorder(t.right):
yield x
Two other examples in test_generators.py
produce solutions for the N-Queens
problem (placing N queens on an NxN chess board so that no queen threatens
another) and the Knight's Tour (finding a route that takes a knight to every
square of an NxN chessboard without visiting any square twice).
Passing values into a generator¶
In Python 2.4 and earlier, generators only produced output. Once a generator's code was invoked to create an iterator, there was no way to pass any new information into the function when its execution is resumed. You could hack together this ability by making the generator look at a global variable or by passing in some mutable object that callers then modify, but these approaches are messy.
In Python 2.5 there's a simple way to pass values into a generator.
yield
became an expression, returning a value that can be assigned to
a variable or otherwise operated on:
val = (yield i)
I recommend that you always put parentheses around a yield
expression
when you're doing something with the returned value, as in the above example.
The parentheses aren't always necessary, but it's easier to always add them
instead of having to remember when they're needed.
(PEP 342 explains the exact rules, which are that a yield
-expression must
always be parenthesized except when it occurs at the top-level expression on the
right-hand side of an assignment. This means you can write val = yield i
but have to use parentheses when there's an operation, as in val = (yield i)
+ 12
.)
Values are sent into a generator by calling its send(value)
method. This method resumes the generator's code and the
yield
expression returns the specified value. If the regular
__next__()
method is called, the yield
returns None
.
Here's a simple counter that increments by 1 and allows changing the value of the internal counter.
def counter(maximum):
i = 0
while i < maximum:
val = (yield i)
# If value provided, change counter
if val is not None:
i = val
else:
i += 1
And here's an example of changing the counter:
>>> it = counter(10)
>>> next(it)
0
>>> next(it)
1
>>> it.send(8)
8
>>> next(it)
9
>>> next(it)
Traceback (most recent call last):
File "t.py", line 15, in <module>
it.next()
StopIteration
Because yield
will often be returning None
, you should always check for
this case. Don't just use its value in expressions unless you're sure that the
send()
method will be the only method used to resume your
generator function.
In addition to send()
, there are two other methods on
generators:
throw(type, value=None, traceback=None)
is used to raise an exception inside the generator; the exception is raised by theyield
expression where the generator's execution is paused.close()
raises aGeneratorExit
exception inside the generator to terminate the iteration. On receiving this exception, the generator's code must either raiseGeneratorExit
orStopIteration
; catching the exception and doing anything else is illegal and will trigger aRuntimeError
.close()
will also be called by Python's garbage collector when the generator is garbage-collected.If you need to run cleanup code when a
GeneratorExit
occurs, I suggest using atry: ... finally:
suite instead of catchingGeneratorExit
.
The cumulative effect of these changes is to turn generators from one-way producers of information into both producers and consumers.
Generators also become coroutines, a more generalized form of subroutines.
Subroutines are entered at one point and exited at another point (the top of the
function, and a return
statement), but coroutines can be entered, exited,
and resumed at many different points (the yield
statements).
Built-in functions¶
Let's look in more detail at built-in functions often used with iterators.
Two of Python's built-in functions, map()
and filter()
duplicate the
features of generator expressions:
map(f, iterA, iterB, ...)
returns an iterator over the sequencef(iterA[0], iterB[0]), f(iterA[1], iterB[1]), f(iterA[2], iterB[2]), ...
.>>> def upper(s): ... return s.upper()
>>> list(map(upper, ['sentence', 'fragment'])) ['SENTENCE', 'FRAGMENT'] >>> [upper(s) for s in ['sentence', 'fragment']] ['SENTENCE', 'FRAGMENT']
You can of course achieve the same effect with a list comprehension.
filter(predicate, iter)
returns an iterator over all the
sequence elements that meet a certain condition, and is similarly duplicated by
list comprehensions. A predicate is a function that returns the truth
value of some condition; for use with filter()
, the predicate must take a
single value.
>>> def is_even(x):
... return (x % 2) == 0
>>> list(filter(is_even, range(10)))
[0, 2, 4, 6, 8]
This can also be written as a list comprehension:
>>> list(x for x in range(10) if is_even(x))
[0, 2, 4, 6, 8]
enumerate(iter, start=0)
counts off the elements in the
iterable returning 2-tuples containing the count (from start) and
each element.
>>> for item in enumerate(['subject', 'verb', 'object']):
... print(item)
(0, 'subject')
(1, 'verb')
(2, 'object')
enumerate()
is often used when looping through a list and recording the
indexes at which certain conditions are met:
f = open('data.txt', 'r')
for i, line in enumerate(f):
if line.strip() == '':
print('Blank line at line #%i' % i)
sorted(iterable, key=None, reverse=False)
collects all the
elements of the iterable into a list, sorts the list, and returns the sorted
result. The key and reverse arguments are passed through to the
constructed list's sort()
method.
>>> import random
>>> # Generate 8 random numbers between [0, 10000)
>>> rand_list = random.sample(range(10000), 8)
>>> rand_list
[769, 7953, 9828, 6431, 8442, 9878, 6213, 2207]
>>> sorted(rand_list)
[769, 2207, 6213, 6431, 7953, 8442, 9828, 9878]
>>> sorted(rand_list, reverse=True)
[9878, 9828, 8442, 7953, 6431, 6213, 2207, 769]
(For a more detailed discussion of sorting, see the Sorting HOW TO.)
The any(iter)
and all(iter)
built-ins look at the
truth values of an iterable's contents. any()
returns True
if any element
in the iterable is a true value, and all()
returns True
if all of the
elements are true values:
>>> any([0, 1, 0])
True
>>> any([0, 0, 0])
False
>>> any([1, 1, 1])
True
>>> all([0, 1, 0])
False
>>> all([0, 0, 0])
False
>>> all([1, 1, 1])
True
zip(iterA, iterB, ...)
takes one element from each iterable and
returns them in a tuple:
zip(['a', 'b', 'c'], (1, 2, 3)) =>
('a', 1), ('b', 2), ('c', 3)
It doesn't construct an in-memory list and exhaust all the input iterators before returning; instead tuples are constructed and returned only if they're requested. (The technical term for this behaviour is lazy evaluation.)
This iterator is intended to be used with iterables that are all of the same length. If the iterables are of different lengths, the resulting stream will be the same length as the shortest iterable.
zip(['a', 'b'], (1, 2, 3)) =>
('a', 1), ('b', 2)
You should avoid doing this, though, because an element may be taken from the longer iterators and discarded. This means you can't go on to use the iterators further because you risk skipping a discarded element.
The itertools module¶
The itertools
module contains a number of commonly-used iterators as well
as functions for combining several iterators. This section will introduce the
module's contents by showing small examples.
The module's functions fall into a few broad classes:
Functions that create a new iterator based on an existing iterator.
Functions for treating an iterator's elements as function arguments.
Functions for selecting portions of an iterator's output.
A function for grouping an iterator's output.
Creating new iterators¶
itertools.count(start, step)
returns an infinite
stream of evenly spaced values. You can optionally supply the starting number,
which defaults to 0, and the interval between numbers, which defaults to 1:
itertools.count() =>
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ...
itertools.count(10) =>
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, ...
itertools.count(10, 5) =>
10, 15, 20, 25, 30, 35, 40, 45, 50, 55, ...
itertools.cycle(iter)
saves a copy of the contents of
a provided iterable and returns a new iterator that returns its elements from
first to last. The new iterator will repeat these elements infinitely.
itertools.cycle([1, 2, 3, 4, 5]) =>
1, 2, 3, 4, 5, 1, 2, 3, 4, 5, ...
itertools.repeat(elem, [n])
returns the provided
element n times, or returns the element endlessly if n is not provided.
itertools.repeat('abc') =>
abc, abc, abc, abc, abc, abc, abc, abc, abc, abc, ...
itertools.repeat('abc', 5) =>
abc, abc, abc, abc, abc
itertools.chain(iterA, iterB, ...)
takes an arbitrary
number of iterables as input, and returns all the elements of the first
iterator, then all the elements of the second, and so on, until all of the
iterables have been exhausted.
itertools.chain(['a', 'b', 'c'], (1, 2, 3)) =>
a, b, c, 1, 2, 3
itertools.islice(iter, [start], stop, [step])
returns
a stream that's a slice of the iterator. With a single stop argument, it
will return the first stop elements. If you supply a starting index, you'll
get stop-start elements, and if you supply a value for step, elements
will be skipped accordingly. Unlike Python's string and list slicing, you can't
use negative values for start, stop, or step.
itertools.islice(range(10), 8) =>
0, 1, 2, 3, 4, 5, 6, 7
itertools.islice(range(10), 2, 8) =>
2, 3, 4, 5, 6, 7
itertools.islice(range(10), 2, 8, 2) =>
2, 4, 6
itertools.tee(iter, [n])
replicates an iterator; it
returns n independent iterators that will all return the contents of the
source iterator.
If you don't supply a value for n, the default is 2. Replicating iterators
requires saving some of the contents of the source iterator, so this can consume
significant memory if the iterator is large and one of the new iterators is
consumed more than the others.
itertools.tee( itertools.count() ) =>
iterA, iterB
where iterA ->
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ...
and iterB ->
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ...
Calling functions on elements¶
The operator
module contains a set of functions corresponding to Python's
operators. Some examples are operator.add(a, b)
(adds
two values), operator.ne(a, b)
(same as a != b
), and
operator.attrgetter('id')
(returns a callable that fetches the .id
attribute).
itertools.starmap(func, iter)
assumes that the
iterable will return a stream of tuples, and calls func using these tuples as
the arguments:
itertools.starmap(os.path.join,
[('/bin', 'python'), ('/usr', 'bin', 'java'),
('/usr', 'bin', 'perl'), ('/usr', 'bin', 'ruby')])
=>
/bin/python, /usr/bin/java, /usr/bin/perl, /usr/bin/ruby
Selecting elements¶
Another group of functions chooses a subset of an iterator's elements based on a predicate.
itertools.filterfalse(predicate, iter)
is the
opposite of filter()
, returning all elements for which the predicate
returns false:
itertools.filterfalse(is_even, itertools.count()) =>
1, 3, 5, 7, 9, 11, 13, 15, ...
itertools.takewhile(predicate, iter)
returns
elements for as long as the predicate returns true. Once the predicate returns
false, the iterator will signal the end of its results.
def less_than_10(x):
return x < 10
itertools.takewhile(less_than_10, itertools.count()) =>
0, 1, 2, 3, 4, 5, 6, 7, 8, 9
itertools.takewhile(is_even, itertools.count()) =>
0
itertools.dropwhile(predicate, iter)
discards
elements while the predicate returns true, and then returns the rest of the
iterable's results.
itertools.dropwhile(less_than_10, itertools.count()) =>
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, ...
itertools.dropwhile(is_even, itertools.count()) =>
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, ...
itertools.compress(data, selectors)
takes two
iterators and returns only those elements of data for which the corresponding
element of selectors is true, stopping whenever either one is exhausted:
itertools.compress([1, 2, 3, 4, 5], [True, True, False, False, True]) =>
1, 2, 5
Combinatoric functions¶
The itertools.combinations(iterable, r)
returns an iterator giving all possible r-tuple combinations of the
elements contained in iterable.
itertools.combinations([1, 2, 3, 4, 5], 2) =>
(1, 2), (1, 3), (1, 4), (1, 5),
(2, 3), (2, 4), (2, 5),
(3, 4), (3, 5),
(4, 5)
itertools.combinations([1, 2, 3, 4, 5], 3) =>
(1, 2, 3), (1, 2, 4), (1, 2, 5), (1, 3, 4), (1, 3, 5), (1, 4, 5),
(2, 3, 4), (2, 3, 5), (2, 4, 5),
(3, 4, 5)
The elements within each tuple remain in the same order as
iterable returned them. For example, the number 1 is always before
2, 3, 4, or 5 in the examples above. A similar function,
itertools.permutations(iterable, r=None)
,
removes this constraint on the order, returning all possible
arrangements of length r:
itertools.permutations([1, 2, 3, 4, 5], 2) =>
(1, 2), (1, 3), (1, 4), (1, 5),
(2, 1), (2, 3), (2, 4), (2, 5),
(3, 1), (3, 2), (3, 4), (3, 5),
(4, 1), (4, 2), (4, 3), (4, 5),
(5, 1), (5, 2), (5, 3), (5, 4)
itertools.permutations([1, 2, 3, 4, 5]) =>
(1, 2, 3, 4, 5), (1, 2, 3, 5, 4), (1, 2, 4, 3, 5),
...
(5, 4, 3, 2, 1)
If you don't supply a value for r the length of the iterable is used, meaning that all the elements are permuted.
Note that these functions produce all of the possible combinations by position and don't require that the contents of iterable are unique:
itertools.permutations('aba', 3) =>
('a', 'b', 'a'), ('a', 'a', 'b'), ('b', 'a', 'a'),
('b', 'a', 'a'), ('a', 'a', 'b'), ('a', 'b', 'a')
The identical tuple ('a', 'a', 'b')
occurs twice, but the two 'a'
strings came from different positions.
The itertools.combinations_with_replacement(iterable, r)
function relaxes a different constraint: elements can be repeated
within a single tuple. Conceptually an element is selected for the
first position of each tuple and then is replaced before the second
element is selected.
itertools.combinations_with_replacement([1, 2, 3, 4, 5], 2) =>
(1, 1), (1, 2), (1, 3), (1, 4), (1, 5),
(2, 2), (2, 3), (2, 4), (2, 5),
(3, 3), (3, 4), (3, 5),
(4, 4), (4, 5),
(5, 5)
Grouping elements¶
The last function I'll discuss, itertools.groupby(iter, key_func=None)
, is the most complicated. key_func(elem)
is a function
that can compute a key value for each element returned by the iterable. If you
don't supply a key function, the key is simply each element itself.
groupby()
collects all the consecutive elements from the
underlying iterable that have the same key value, and returns a stream of
2-tuples containing a key value and an iterator for the elements with that key.
city_list = [('Decatur', 'AL'), ('Huntsville', 'AL'), ('Selma', 'AL'),
('Anchorage', 'AK'), ('Nome', 'AK'),
('Flagstaff', 'AZ'), ('Phoenix', 'AZ'), ('Tucson', 'AZ'),
...
]
def get_state(city_state):
return city_state[1]
itertools.groupby(city_list, get_state) =>
('AL', iterator-1),
('AK', iterator-2),
('AZ', iterator-3), ...
where
iterator-1 =>
('Decatur', 'AL'), ('Huntsville', 'AL'), ('Selma', 'AL')
iterator-2 =>
('Anchorage', 'AK'), ('Nome', 'AK')
iterator-3 =>
('Flagstaff', 'AZ'), ('Phoenix', 'AZ'), ('Tucson', 'AZ')
groupby()
assumes that the underlying iterable's contents will
already be sorted based on the key. Note that the returned iterators also use
the underlying iterable, so you have to consume the results of iterator-1 before
requesting iterator-2 and its corresponding key.
The functools module¶
The functools
module in Python 2.5 contains some higher-order functions.
A higher-order function takes one or more functions as input and returns a
new function. The most useful tool in this module is the
functools.partial()
function.
For programs written in a functional style, you'll sometimes want to construct
variants of existing functions that have some of the parameters filled in.
Consider a Python function f(a, b, c)
; you may wish to create a new function
g(b, c)
that's equivalent to f(1, b, c)
; you're filling in a value for
one of f()
's parameters. This is called "partial function application".
The constructor for partial()
takes the arguments
(function, arg1, arg2, ..., kwarg1=value1, kwarg2=value2)
. The resulting
object is callable, so you can just call it to invoke function
with the
filled-in arguments.
Here's a small but realistic example:
import functools
def log(message, subsystem):
"""Write the contents of 'message' to the specified subsystem."""
print('%s: %s' % (subsystem, message))
...
server_log = functools.partial(log, subsystem='server')
server_log('Unable to open socket')
functools.reduce(func, iter, [initial_value])
cumulatively performs an operation on all the iterable's elements and,
therefore, can't be applied to infinite iterables. func must be a function
that takes two elements and returns a single value. functools.reduce()
takes the first two elements A and B returned by the iterator and calculates
func(A, B)
. It then requests the third element, C, calculates
func(func(A, B), C)
, combines this result with the fourth element returned,
and continues until the iterable is exhausted. If the iterable returns no
values at all, a TypeError
exception is raised. If the initial value is
supplied, it's used as a starting point and func(initial_value, A)
is the
first calculation.
>>> import operator, functools
>>> functools.reduce(operator.concat, ['A', 'BB', 'C'])
'ABBC'
>>> functools.reduce(operator.concat, [])
Traceback (most recent call last):
...
TypeError: reduce() of empty sequence with no initial value
>>> functools.reduce(operator.mul, [1, 2, 3], 1)
6
>>> functools.reduce(operator.mul, [], 1)
1
If you use operator.add()
with functools.reduce()
, you'll add up all the
elements of the iterable. This case is so common that there's a special
built-in called sum()
to compute it:
>>> import functools, operator
>>> functools.reduce(operator.add, [1, 2, 3, 4], 0)
10
>>> sum([1, 2, 3, 4])
10
>>> sum([])
0
For many uses of functools.reduce()
, though, it can be clearer to just
write the obvious for
loop:
import functools
# Instead of:
product = functools.reduce(operator.mul, [1, 2, 3], 1)
# You can write:
product = 1
for i in [1, 2, 3]:
product *= i
A related function is itertools.accumulate(iterable, func=operator.add)
. It performs the same calculation, but instead of
returning only the final result, accumulate()
returns an iterator that
also yields each partial result:
itertools.accumulate([1, 2, 3, 4, 5]) =>
1, 3, 6, 10, 15
itertools.accumulate([1, 2, 3, 4, 5], operator.mul) =>
1, 2, 6, 24, 120
The operator module¶
The operator
module was mentioned earlier. It contains a set of
functions corresponding to Python's operators. These functions are often useful
in functional-style code because they save you from writing trivial functions
that perform a single operation.
Some of the functions in this module are:
Math operations:
add()
,sub()
,mul()
,floordiv()
,abs()
, ...Logical operations:
not_()
,truth()
.Bitwise operations:
and_()
,or_()
,invert()
.Comparisons:
eq()
,ne()
,lt()
,le()
,gt()
, andge()
.Object identity:
is_()
,is_not()
.
Consult the operator module's documentation for a complete list.
Small functions and the lambda expression¶
When writing functional-style programs, you'll often need little functions that act as predicates or that combine elements in some way.
If there's a Python built-in or a module function that's suitable, you don't need to define a new function at all:
stripped_lines = [line.strip() for line in lines]
existing_files = filter(os.path.exists, file_list)
If the function you need doesn't exist, you need to write it. One way to write
small functions is to use the lambda
statement. lambda
takes a
number of parameters and an expression combining these parameters, and creates
an anonymous function that returns the value of the expression:
adder = lambda x, y: x+y
print_assign = lambda name, value: name + '=' + str(value)
An alternative is to just use the def
statement and define a function in the
usual way:
def adder(x, y):
return x + y
def print_assign(name, value):
return name + '=' + str(value)
Which alternative is preferable? That's a style question; my usual course is to
avoid using lambda
.
One reason for my preference is that lambda
is quite limited in the
functions it can define. The result has to be computable as a single
expression, which means you can't have multiway if... elif... else
comparisons or try... except
statements. If you try to do too much in a
lambda
statement, you'll end up with an overly complicated expression that's
hard to read. Quick, what's the following code doing?
import functools
total = functools.reduce(lambda a, b: (0, a[1] + b[1]), items)[1]
You can figure it out, but it takes time to disentangle the expression to figure
out what's going on. Using a short nested def
statements makes things a
little bit better:
import functools
def combine(a, b):
return 0, a[1] + b[1]
total = functools.reduce(combine, items)[1]
But it would be best of all if I had simply used a for
loop:
total = 0
for a, b in items:
total += b
Or the sum()
built-in and a generator expression:
total = sum(b for a, b in items)
Many uses of functools.reduce()
are clearer when written as for
loops.
Fredrik Lundh once suggested the following set of rules for refactoring uses of
lambda
:
Write a lambda function.
Write a comment explaining what the heck that lambda does.
Study the comment for a while, and think of a name that captures the essence of the comment.
Convert the lambda to a def statement, using that name.
Remove the comment.
I really like these rules, but you're free to disagree about whether this lambda-free style is better.
Revision History and Acknowledgements¶
The author would like to thank the following people for offering suggestions, corrections and assistance with various drafts of this article: Ian Bicking, Nick Coghlan, Nick Efford, Raymond Hettinger, Jim Jewett, Mike Krell, Leandro Lameiro, Jussi Salmela, Collin Winter, Blake Winton.
Version 0.1: posted June 30 2006.
Version 0.11: posted July 1 2006. Typo fixes.
Version 0.2: posted July 10 2006. Merged genexp and listcomp sections into one. Typo fixes.
Version 0.21: Added more references suggested on the tutor mailing list.
Version 0.30: Adds a section on the functional
module written by Collin
Winter; adds short section on the operator module; a few other edits.
References¶
General¶
Structure and Interpretation of Computer Programs, by Harold Abelson and Gerald Jay Sussman with Julie Sussman. Full text at https://mitpress.mit.edu/sicp/. In this classic textbook of computer science, chapters 2 and 3 discuss the use of sequences and streams to organize the data flow inside a program. The book uses Scheme for its examples, but many of the design approaches described in these chapters are applicable to functional-style Python code.
http://www.defmacro.org/ramblings/fp.html: A general introduction to functional programming that uses Java examples and has a lengthy historical introduction.
https://en.wikipedia.org/wiki/Functional_programming: General Wikipedia entry describing functional programming.
https://en.wikipedia.org/wiki/Coroutine: Entry for coroutines.
https://en.wikipedia.org/wiki/Currying: Entry for the concept of currying.
Python-specific¶
http://gnosis.cx/TPiP/: The first chapter of David Mertz's book Text Processing in Python discusses functional programming for text processing, in the section titled "Utilizing Higher-Order Functions in Text Processing".
Mertz also wrote a 3-part series of articles on functional programming for IBM's DeveloperWorks site; see part 1, part 2, and part 3,