# Logging Cookbook¶

Author: Vinay Sajip

This page contains a number of recipes related to logging, which have been found useful in the past.

## Using logging in multiple modules¶

Multiple calls to logging.getLogger('someLogger') return a reference to the same logger object. This is true not only within the same module, but also across modules as long as it is in the same Python interpreter process. It is true for references to the same object; additionally, application code can define and configure a parent logger in one module and create (but not configure) a child logger in a separate module, and all logger calls to the child will pass up to the parent. Here is a main module:

import logging
import auxiliary_module

# create logger with 'spam_application'
logger = logging.getLogger('spam_application')
logger.setLevel(logging.DEBUG)
# create file handler which logs even debug messages
fh = logging.FileHandler('spam.log')
fh.setLevel(logging.DEBUG)
# create console handler with a higher log level
ch = logging.StreamHandler()
ch.setLevel(logging.ERROR)
# create formatter and add it to the handlers
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
fh.setFormatter(formatter)
ch.setFormatter(formatter)
# add the handlers to the logger

logger.info('creating an instance of auxiliary_module.Auxiliary')
a = auxiliary_module.Auxiliary()
logger.info('created an instance of auxiliary_module.Auxiliary')
logger.info('calling auxiliary_module.Auxiliary.do_something')
a.do_something()
logger.info('finished auxiliary_module.Auxiliary.do_something')
logger.info('calling auxiliary_module.some_function()')
auxiliary_module.some_function()
logger.info('done with auxiliary_module.some_function()')


Here is the auxiliary module:

import logging

# create logger
module_logger = logging.getLogger('spam_application.auxiliary')

class Auxiliary:
def __init__(self):
self.logger = logging.getLogger('spam_application.auxiliary.Auxiliary')
self.logger.info('creating an instance of Auxiliary')

def do_something(self):
self.logger.info('doing something')
a = 1 + 1
self.logger.info('done doing something')

def some_function():


The output looks like this:

2005-03-23 23:47:11,663 - spam_application - INFO -
creating an instance of auxiliary_module.Auxiliary
2005-03-23 23:47:11,665 - spam_application.auxiliary.Auxiliary - INFO -
creating an instance of Auxiliary
2005-03-23 23:47:11,665 - spam_application - INFO -
created an instance of auxiliary_module.Auxiliary
2005-03-23 23:47:11,668 - spam_application - INFO -
calling auxiliary_module.Auxiliary.do_something
2005-03-23 23:47:11,668 - spam_application.auxiliary.Auxiliary - INFO -
doing something
2005-03-23 23:47:11,669 - spam_application.auxiliary.Auxiliary - INFO -
done doing something
2005-03-23 23:47:11,670 - spam_application - INFO -
finished auxiliary_module.Auxiliary.do_something
2005-03-23 23:47:11,671 - spam_application - INFO -
calling auxiliary_module.some_function()
2005-03-23 23:47:11,672 - spam_application.auxiliary - INFO -
2005-03-23 23:47:11,673 - spam_application - INFO -
done with auxiliary_module.some_function()


Logging from multiple threads requires no special effort. The following example shows logging from the main (initIal) thread and another thread:

import logging
import time

def worker(arg):
while not arg['stop']:
logging.debug('Hi from myfunc')
time.sleep(0.5)

def main():
info = {'stop': False}
while True:
try:
logging.debug('Hello from main')
time.sleep(0.75)
except KeyboardInterrupt:
info['stop'] = True
break

if __name__ == '__main__':
main()


When run, the script should print something like the following:

   0 Thread-1 Hi from myfunc


This shows the logging output interspersed as one might expect. This approach works for more threads than shown here, of course.

## Multiple handlers and formatters¶

Loggers are plain Python objects. The addHandler() method has no minimum or maximum quota for the number of handlers you may add. Sometimes it will be beneficial for an application to log all messages of all severities to a text file while simultaneously logging errors or above to the console. To set this up, simply configure the appropriate handlers. The logging calls in the application code will remain unchanged. Here is a slight modification to the previous simple module-based configuration example:

import logging

logger = logging.getLogger('simple_example')
logger.setLevel(logging.DEBUG)
# create file handler which logs even debug messages
fh = logging.FileHandler('spam.log')
fh.setLevel(logging.DEBUG)
# create console handler with a higher log level
ch = logging.StreamHandler()
ch.setLevel(logging.ERROR)
# create formatter and add it to the handlers
formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s')
ch.setFormatter(formatter)
fh.setFormatter(formatter)
# add the handlers to logger

# 'application' code
logger.debug('debug message')
logger.info('info message')
logger.warn('warn message')
logger.error('error message')
logger.critical('critical message')


Notice that the “application” code does not care about multiple handlers. All that changed was the addition and configuration of a new handler named fh.

The ability to create new handlers with higher- or lower-severity filters can be very helpful when writing and testing an application. Instead of using many print statements for debugging, use logger.debug: Unlike the print statements, which you will have to delete or comment out later, the logger.debug statements can remain intact in the source code and remain dormant until you need them again. At that time, the only change that needs to happen is to modify the severity level of the logger and/or handler to debug.

## Logging to multiple destinations¶

Let’s say you want to log to console and file with different message formats and in differing circumstances. Say you want to log messages with levels of DEBUG and higher to file, and those messages at level INFO and higher to the console. Let’s also assume that the file should contain timestamps, but the console messages should not. Here’s how you can achieve this:

import logging

# set up logging to file - see previous section for more details
logging.basicConfig(level=logging.DEBUG,
format='%(asctime)s %(name)-12s %(levelname)-8s %(message)s',
datefmt='%m-%d %H:%M',
filename='/temp/myapp.log',
filemode='w')
# define a Handler which writes INFO messages or higher to the sys.stderr
console = logging.StreamHandler()
console.setLevel(logging.INFO)
# set a format which is simpler for console use
formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s')
# tell the handler to use this format
console.setFormatter(formatter)
# add the handler to the root logger

# Now, we can log to the root logger, or any other logger. First the root...
logging.info('Jackdaws love my big sphinx of quartz.')

# Now, define a couple of other loggers which might represent areas in your
# application:

logger1 = logging.getLogger('myapp.area1')
logger2 = logging.getLogger('myapp.area2')

logger1.debug('Quick zephyrs blow, vexing daft Jim.')
logger1.info('How quickly daft jumping zebras vex.')
logger2.warning('Jail zesty vixen who grabbed pay from quack.')
logger2.error('The five boxing wizards jump quickly.')


When you run this, on the console you will see

root        : INFO     Jackdaws love my big sphinx of quartz.
myapp.area1 : INFO     How quickly daft jumping zebras vex.
myapp.area2 : WARNING  Jail zesty vixen who grabbed pay from quack.
myapp.area2 : ERROR    The five boxing wizards jump quickly.


and in the file you will see something like

10-22 22:19 root         INFO     Jackdaws love my big sphinx of quartz.
10-22 22:19 myapp.area1  DEBUG    Quick zephyrs blow, vexing daft Jim.
10-22 22:19 myapp.area1  INFO     How quickly daft jumping zebras vex.
10-22 22:19 myapp.area2  WARNING  Jail zesty vixen who grabbed pay from quack.
10-22 22:19 myapp.area2  ERROR    The five boxing wizards jump quickly.


As you can see, the DEBUG message only shows up in the file. The other messages are sent to both destinations.

This example uses console and file handlers, but you can use any number and combination of handlers you choose.

## Configuration server example¶

Here is an example of a module using the logging configuration server:

import logging
import logging.config
import time
import os

logging.config.fileConfig('logging.conf')

# create and start listener on port 9999
t = logging.config.listen(9999)
t.start()

logger = logging.getLogger('simpleExample')

try:
# loop through logging calls to see the difference
# new configurations make, until Ctrl+C is pressed
while True:
logger.debug('debug message')
logger.info('info message')
logger.warn('warn message')
logger.error('error message')
logger.critical('critical message')
time.sleep(5)
except KeyboardInterrupt:
# cleanup
logging.config.stopListening()
t.join()


And here is a script that takes a filename and sends that file to the server, properly preceded with the binary-encoded length, as the new logging configuration:

#!/usr/bin/env python
import socket, sys, struct

with open(sys.argv[1], 'rb') as f:

HOST = 'localhost'
PORT = 9999
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
print('connecting...')
s.connect((HOST, PORT))
print('sending config...')
s.send(struct.pack('>L', len(data_to_send)))
s.send(data_to_send)
s.close()
print('complete')


## Sending and receiving logging events across a network¶

Let’s say you want to send logging events across a network, and handle them at the receiving end. A simple way of doing this is attaching a SocketHandler instance to the root logger at the sending end:

import logging, logging.handlers

rootLogger = logging.getLogger('')
rootLogger.setLevel(logging.DEBUG)
socketHandler = logging.handlers.SocketHandler('localhost',
logging.handlers.DEFAULT_TCP_LOGGING_PORT)
# don't bother with a formatter, since a socket handler sends the event as
# an unformatted pickle

# Now, we can log to the root logger, or any other logger. First the root...
logging.info('Jackdaws love my big sphinx of quartz.')

# Now, define a couple of other loggers which might represent areas in your
# application:

logger1 = logging.getLogger('myapp.area1')
logger2 = logging.getLogger('myapp.area2')

logger1.debug('Quick zephyrs blow, vexing daft Jim.')
logger1.info('How quickly daft jumping zebras vex.')
logger2.warning('Jail zesty vixen who grabbed pay from quack.')
logger2.error('The five boxing wizards jump quickly.')


At the receiving end, you can set up a receiver using the SocketServer module. Here is a basic working example:

import pickle
import logging
import logging.handlers
import SocketServer
import struct

class LogRecordStreamHandler(SocketServer.StreamRequestHandler):
"""Handler for a streaming logging request.

This basically logs the record using whatever logging policy is
configured locally.
"""

def handle(self):
"""
Handle multiple requests - each expected to be a 4-byte length,
followed by the LogRecord in pickle format. Logs the record
according to whatever policy is configured locally.
"""
while True:
chunk = self.connection.recv(4)
if len(chunk) < 4:
break
slen = struct.unpack('>L', chunk)[0]
chunk = self.connection.recv(slen)
while len(chunk) < slen:
chunk = chunk + self.connection.recv(slen - len(chunk))
obj = self.unPickle(chunk)
record = logging.makeLogRecord(obj)
self.handleLogRecord(record)

def unPickle(self, data):

def handleLogRecord(self, record):
# if a name is specified, we use the named logger rather than the one
# implied by the record.
if self.server.logname is not None:
name = self.server.logname
else:
name = record.name
logger = logging.getLogger(name)
# N.B. EVERY record gets logged. This is because Logger.handle
# is normally called AFTER logger-level filtering. If you want
# to do filtering, do it at the client end to save wasting
# cycles and network bandwidth!
logger.handle(record)

"""
Simple TCP socket-based logging receiver suitable for testing.
"""

def __init__(self, host='localhost',
port=logging.handlers.DEFAULT_TCP_LOGGING_PORT,
handler=LogRecordStreamHandler):
self.abort = 0
self.timeout = 1
self.logname = None

def serve_until_stopped(self):
import select
abort = 0
while not abort:
rd, wr, ex = select.select([self.socket.fileno()],
[], [],
self.timeout)
if rd:
self.handle_request()
abort = self.abort

def main():
logging.basicConfig(
format='%(relativeCreated)5d %(name)-15s %(levelname)-8s %(message)s')
tcpserver.serve_until_stopped()

if __name__ == '__main__':
main()


First run the server, and then the client. On the client side, nothing is printed on the console; on the server side, you should see something like:

About to start TCP server...
59 root            INFO     Jackdaws love my big sphinx of quartz.
59 myapp.area1     DEBUG    Quick zephyrs blow, vexing daft Jim.
69 myapp.area1     INFO     How quickly daft jumping zebras vex.
69 myapp.area2     WARNING  Jail zesty vixen who grabbed pay from quack.
69 myapp.area2     ERROR    The five boxing wizards jump quickly.


Note that there are some security issues with pickle in some scenarios. If these affect you, you can use an alternative serialization scheme by overriding the makePickle() method and implementing your alternative there, as well as adapting the above script to use your alternative serialization.

Sometimes you want logging output to contain contextual information in addition to the parameters passed to the logging call. For example, in a networked application, it may be desirable to log client-specific information in the log (e.g. remote client’s username, or IP address). Although you could use the extra parameter to achieve this, it’s not always convenient to pass the information in this way. While it might be tempting to create Logger instances on a per-connection basis, this is not a good idea because these instances are not garbage collected. While this is not a problem in practice, when the number of Logger instances is dependent on the level of granularity you want to use in logging an application, it could be hard to manage if the number of Logger instances becomes effectively unbounded.

### Using LoggerAdapters to impart contextual information¶

An easy way in which you can pass contextual information to be output along with logging event information is to use the LoggerAdapter class. This class is designed to look like a Logger, so that you can call debug(), info(), warning(), error(), exception(), critical() and log(). These methods have the same signatures as their counterparts in Logger, so you can use the two types of instances interchangeably.

When you create an instance of LoggerAdapter, you pass it a Logger instance and a dict-like object which contains your contextual information. When you call one of the logging methods on an instance of LoggerAdapter, it delegates the call to the underlying instance of Logger passed to its constructor, and arranges to pass the contextual information in the delegated call. Here’s a snippet from the code of LoggerAdapter:

def debug(self, msg, *args, **kwargs):
"""
Delegate a debug call to the underlying logger, after adding
contextual information from this adapter instance.
"""
msg, kwargs = self.process(msg, kwargs)
self.logger.debug(msg, *args, **kwargs)


The process() method of LoggerAdapter is where the contextual information is added to the logging output. It’s passed the message and keyword arguments of the logging call, and it passes back (potentially) modified versions of these to use in the call to the underlying logger. The default implementation of this method leaves the message alone, but inserts an “extra” key in the keyword argument whose value is the dict-like object passed to the constructor. Of course, if you had passed an “extra” keyword argument in the call to the adapter, it will be silently overwritten.

The advantage of using “extra” is that the values in the dict-like object are merged into the LogRecord instance’s __dict__, allowing you to use customized strings with your Formatter instances which know about the keys of the dict-like object. If you need a different method, e.g. if you want to prepend or append the contextual information to the message string, you just need to subclass LoggerAdapter and override process() to do what you need. Here is a simple example:

class CustomAdapter(logging.LoggerAdapter):
"""
This example adapter expects the passed in dict-like object to have a
'connid' key, whose value in brackets is prepended to the log message.
"""
def process(self, msg, kwargs):
return '[%s] %s' % (self.extra['connid'], msg), kwargs


which you can use like this:

logger = logging.getLogger(__name__)


Then any events that you log to the adapter will have the value of some_conn_id prepended to the log messages.

#### Using objects other than dicts to pass contextual information¶

You don’t need to pass an actual dict to a LoggerAdapter - you could pass an instance of a class which implements __getitem__ and __iter__ so that it looks like a dict to logging. This would be useful if you want to generate values dynamically (whereas the values in a dict would be constant).

### Using Filters to impart contextual information¶

You can also add contextual information to log output using a user-defined Filter. Filter instances are allowed to modify the LogRecords passed to them, including adding additional attributes which can then be output using a suitable format string, or if needed a custom Formatter.

For example in a web application, the request being processed (or at least, the interesting parts of it) can be stored in a threadlocal (threading.local) variable, and then accessed from a Filter to add, say, information from the request - say, the remote IP address and remote user’s username - to the LogRecord, using the attribute names “ip” and “user” as in the LoggerAdapter example above. In that case, the same format string can be used to get similar output to that shown above. Here’s an example script:

import logging
from random import choice

class ContextFilter(logging.Filter):
"""
This is a filter which injects contextual information into the log.

Rather than use actual contextual information, we just use random
data in this demo.
"""

USERS = ['jim', 'fred', 'sheila']
IPS = ['123.231.231.123', '127.0.0.1', '192.168.0.1']

def filter(self, record):

record.ip = choice(ContextFilter.IPS)
record.user = choice(ContextFilter.USERS)
return True

if __name__ == '__main__':
levels = (logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, logging.CRITICAL)
logging.basicConfig(level=logging.DEBUG,
format='%(asctime)-15s %(name)-5s %(levelname)-8s IP: %(ip)-15s User: %(user)-8s %(message)s')
a1 = logging.getLogger('a.b.c')
a2 = logging.getLogger('d.e.f')

f = ContextFilter()
a1.debug('A debug message')
a1.info('An info message with %s', 'some parameters')
for x in range(10):
lvl = choice(levels)
lvlname = logging.getLevelName(lvl)
a2.log(lvl, 'A message at %s level with %d %s', lvlname, 2, 'parameters')


which, when run, produces something like:

2010-09-06 22:38:15,292 a.b.c DEBUG    IP: 123.231.231.123 User: fred     A debug message
2010-09-06 22:38:15,300 a.b.c INFO     IP: 192.168.0.1     User: sheila   An info message with some parameters
2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 127.0.0.1       User: sheila   A message at CRITICAL level with 2 parameters
2010-09-06 22:38:15,300 d.e.f ERROR    IP: 127.0.0.1       User: jim      A message at ERROR level with 2 parameters
2010-09-06 22:38:15,300 d.e.f DEBUG    IP: 127.0.0.1       User: sheila   A message at DEBUG level with 2 parameters
2010-09-06 22:38:15,300 d.e.f ERROR    IP: 123.231.231.123 User: fred     A message at ERROR level with 2 parameters
2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 192.168.0.1     User: jim      A message at CRITICAL level with 2 parameters
2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 127.0.0.1       User: sheila   A message at CRITICAL level with 2 parameters
2010-09-06 22:38:15,300 d.e.f DEBUG    IP: 192.168.0.1     User: jim      A message at DEBUG level with 2 parameters
2010-09-06 22:38:15,301 d.e.f ERROR    IP: 127.0.0.1       User: sheila   A message at ERROR level with 2 parameters
2010-09-06 22:38:15,301 d.e.f DEBUG    IP: 123.231.231.123 User: fred     A message at DEBUG level with 2 parameters
2010-09-06 22:38:15,301 d.e.f INFO     IP: 123.231.231.123 User: fred     A message at INFO level with 2 parameters


## Logging to a single file from multiple processes¶

Although logging is thread-safe, and logging to a single file from multiple threads in a single process is supported, logging to a single file from multiple processes is not supported, because there is no standard way to serialize access to a single file across multiple processes in Python. If you need to log to a single file from multiple processes, one way of doing this is to have all the processes log to a SocketHandler, and have a separate process which implements a socket server which reads from the socket and logs to file. (If you prefer, you can dedicate one thread in one of the existing processes to perform this function.) This section documents this approach in more detail and includes a working socket receiver which can be used as a starting point for you to adapt in your own applications.

If you are using a recent version of Python which includes the multiprocessing module, you could write your own handler which uses the Lock class from this module to serialize access to the file from your processes. The existing FileHandler and subclasses do not make use of multiprocessing at present, though they may do so in the future. Note that at present, the multiprocessing module does not provide working lock functionality on all platforms (see https://bugs.python.org/issue3770).

## Using file rotation¶

Sometimes you want to let a log file grow to a certain size, then open a new file and log to that. You may want to keep a certain number of these files, and when that many files have been created, rotate the files so that the number of files and the size of the files both remain bounded. For this usage pattern, the logging package provides a RotatingFileHandler:

import glob
import logging
import logging.handlers

LOG_FILENAME = 'logging_rotatingfile_example.out'

# Set up a specific logger with our desired output level
my_logger = logging.getLogger('MyLogger')
my_logger.setLevel(logging.DEBUG)

# Add the log message handler to the logger
handler = logging.handlers.RotatingFileHandler(
LOG_FILENAME, maxBytes=20, backupCount=5)

# Log some messages
for i in range(20):
my_logger.debug('i = %d' % i)

# See what files are created
logfiles = glob.glob('%s*' % LOG_FILENAME)

for filename in logfiles:
print(filename)


The result should be 6 separate files, each with part of the log history for the application:

logging_rotatingfile_example.out
logging_rotatingfile_example.out.1
logging_rotatingfile_example.out.2
logging_rotatingfile_example.out.3
logging_rotatingfile_example.out.4
logging_rotatingfile_example.out.5


The most current file is always logging_rotatingfile_example.out, and each time it reaches the size limit it is renamed with the suffix .1. Each of the existing backup files is renamed to increment the suffix (.1 becomes .2, etc.) and the .6 file is erased.

Obviously this example sets the log length much too small as an extreme example. You would want to set maxBytes to an appropriate value.

## An example dictionary-based configuration¶

Below is an example of a logging configuration dictionary - it’s taken from the documentation on the Django project. This dictionary is passed to dictConfig() to put the configuration into effect:

LOGGING = {
'version': 1,
'disable_existing_loggers': True,
'formatters': {
'verbose': {
'format': '%(levelname)s %(asctime)s %(module)s %(process)d %(thread)d %(message)s'
},
'simple': {
'format': '%(levelname)s %(message)s'
},
},
'filters': {
'special': {
'()': 'project.logging.SpecialFilter',
'foo': 'bar',
}
},
'handlers': {
'null': {
'level':'DEBUG',
'class':'django.utils.log.NullHandler',
},
'console':{
'level':'DEBUG',
'class':'logging.StreamHandler',
'formatter': 'simple'
},
'level': 'ERROR',
'filters': ['special']
}
},
'loggers': {
'django': {
'handlers':['null'],
'propagate': True,
'level':'INFO',
},
'django.request': {
'level': 'ERROR',
'propagate': False,
},
'myproject.custom': {
'level': 'INFO',
'filters': ['special']
}
}
}


## Inserting a BOM into messages sent to a SysLogHandler¶

RFC 5424 requires that a Unicode message be sent to a syslog daemon as a set of bytes which have the following structure: an optional pure-ASCII component, followed by a UTF-8 Byte Order Mark (BOM), followed by Unicode encoded using UTF-8. (See the relevant section of the specification.)

In Python 2.6 and 2.7, code was added to SysLogHandler to insert a BOM into the message, but unfortunately, it was implemented incorrectly, with the BOM appearing at the beginning of the message and hence not allowing any pure-ASCII component to appear before it.

As this behaviour is broken, the incorrect BOM insertion code is being removed from Python 2.7.4 and later. However, it is not being replaced, and if you want to produce RFC 5424-compliant messages which include a BOM, an optional pure-ASCII sequence before it and arbitrary Unicode after it, encoded using UTF-8, then you need to do the following:

1. Attach a Formatter instance to your SysLogHandler instance, with a format string such as:

u'ASCII section\ufeffUnicode section'


The Unicode code point u'\ufeff', when encoded using UTF-8, will be encoded as a UTF-8 BOM – the byte-string '\xef\xbb\xbf'.

2. Replace the ASCII section with whatever placeholders you like, but make sure that the data that appears in there after substitution is always ASCII (that way, it will remain unchanged after UTF-8 encoding).

3. Replace the Unicode section with whatever placeholders you like; if the data which appears there after substitution contains characters outside the ASCII range, that’s fine – it will be encoded using UTF-8.

If the formatted message is Unicode, it will be encoded using UTF-8 encoding by SysLogHandler. If you follow the above rules, you should be able to produce RFC 5424-compliant messages. If you don’t, logging may not complain, but your messages will not be RFC 5424-compliant, and your syslog daemon may complain.

## Implementing structured logging¶

Although most logging messages are intended for reading by humans, and thus not readily machine-parseable, there might be circumstances where you want to output messages in a structured format which is capable of being parsed by a program (without needing complex regular expressions to parse the log message). This is straightforward to achieve using the logging package. There are a number of ways in which this could be achieved, but the following is a simple approach which uses JSON to serialise the event in a machine-parseable manner:

import json
import logging

class StructuredMessage(object):
def __init__(self, message, **kwargs):
self.message = message
self.kwargs = kwargs

def __str__(self):
return '%s >>> %s' % (self.message, json.dumps(self.kwargs))

_ = StructuredMessage   # optional, to improve readability

logging.basicConfig(level=logging.INFO, format='%(message)s')
logging.info(_('message 1', foo='bar', bar='baz', num=123, fnum=123.456))


If the above script is run, it prints:

message 1 >>> {"fnum": 123.456, "num": 123, "bar": "baz", "foo": "bar"}


Note that the order of items might be different according to the version of Python used.

If you need more specialised processing, you can use a custom JSON encoder, as in the following complete example:

from __future__ import unicode_literals

import json
import logging

# This next bit is to ensure the script runs unchanged on 2.x and 3.x
try:
unicode
except NameError:
unicode = str

class Encoder(json.JSONEncoder):
def default(self, o):
if isinstance(o, set):
return tuple(o)
elif isinstance(o, unicode):
return o.encode('unicode_escape').decode('ascii')
return super(Encoder, self).default(o)

class StructuredMessage(object):
def __init__(self, message, **kwargs):
self.message = message
self.kwargs = kwargs

def __str__(self):
s = Encoder().encode(self.kwargs)
return '%s >>> %s' % (self.message, s)

_ = StructuredMessage   # optional, to improve readability

def main():
logging.basicConfig(level=logging.INFO, format='%(message)s')
logging.info(_('message 1', set_value=set([1, 2, 3]), snowman='\u2603'))

if __name__ == '__main__':
main()


When the above script is run, it prints:

message 1 >>> {"snowman": "\u2603", "set_value": [1, 2, 3]}


Note that the order of items might be different according to the version of Python used.

## Customizing handlers with dictConfig()¶

There are times when you want to customize logging handlers in particular ways, and if you use dictConfig() you may be able to do this without subclassing. As an example, consider that you may want to set the ownership of a log file. On POSIX, this is easily done using os.chown(), but the file handlers in the stdlib don’t offer built-in support. You can customize handler creation using a plain function such as:

def owned_file_handler(filename, mode='a', encoding=None, owner=None):
if owner:
import os, pwd, grp
# convert user and group names to uid and gid
uid = pwd.getpwnam(owner[0]).pw_uid
gid = grp.getgrnam(owner[1]).gr_gid
owner = (uid, gid)
if not os.path.exists(filename):
open(filename, 'a').close()
os.chown(filename, *owner)
return logging.FileHandler(filename, mode, encoding)


You can then specify, in a logging configuration passed to dictConfig(), that a logging handler be created by calling this function:

LOGGING = {
'version': 1,
'disable_existing_loggers': False,
'formatters': {
'default': {
'format': '%(asctime)s %(levelname)s %(name)s %(message)s'
},
},
'handlers': {
'file':{
# The values below are popped from this dictionary and
# used to create the handler, set the handler's level and
# its formatter.
'()': owned_file_handler,
'level':'DEBUG',
'formatter': 'default',
# The values below are passed to the handler creator callable
# as keyword arguments.
'owner': ['pulse', 'pulse'],
'filename': 'chowntest.log',
'mode': 'w',
'encoding': 'utf-8',
},
},
'root': {
'handlers': ['file'],
'level': 'DEBUG',
},
}


In this example I am setting the ownership using the pulse user and group, just for the purposes of illustration. Putting it together into a working script, chowntest.py:

import logging, logging.config, os, shutil

def owned_file_handler(filename, mode='a', encoding=None, owner=None):
if owner:
if not os.path.exists(filename):
open(filename, 'a').close()
shutil.chown(filename, *owner)
return logging.FileHandler(filename, mode, encoding)

LOGGING = {
'version': 1,
'disable_existing_loggers': False,
'formatters': {
'default': {
'format': '%(asctime)s %(levelname)s %(name)s %(message)s'
},
},
'handlers': {
'file':{
# The values below are popped from this dictionary and
# used to create the handler, set the handler's level and
# its formatter.
'()': owned_file_handler,
'level':'DEBUG',
'formatter': 'default',
# The values below are passed to the handler creator callable
# as keyword arguments.
'owner': ['pulse', 'pulse'],
'filename': 'chowntest.log',
'mode': 'w',
'encoding': 'utf-8',
},
},
'root': {
'handlers': ['file'],
'level': 'DEBUG',
},
}

logging.config.dictConfig(LOGGING)
logger = logging.getLogger('mylogger')
logger.debug('A debug message')


To run this, you will probably need to run as root:

$sudo python3.3 chowntest.py$ cat chowntest.log
2013-11-05 09:34:51,128 DEBUG mylogger A debug message
$ls -l chowntest.log -rw-r--r-- 1 pulse pulse 55 2013-11-05 09:34 chowntest.log  Note that this example uses Python 3.3 because that’s where shutil.chown() makes an appearance. This approach should work with any Python version that supports dictConfig() - namely, Python 2.7, 3.2 or later. With pre-3.3 versions, you would need to implement the actual ownership change using e.g. os.chown(). In practice, the handler-creating function may be in a utility module somewhere in your project. Instead of the line in the configuration: '()': owned_file_handler,  you could use e.g.: '()': 'ext://project.util.owned_file_handler',  where project.util can be replaced with the actual name of the package where the function resides. In the above working script, using 'ext://__main__.owned_file_handler' should work. Here, the actual callable is resolved by dictConfig() from the ext:// specification. This example hopefully also points the way to how you could implement other types of file change - e.g. setting specific POSIX permission bits - in the same way, using os.chmod(). Of course, the approach could also be extended to types of handler other than a FileHandler - for example, one of the rotating file handlers, or a different type of handler altogether. ## Configuring filters with dictConfig()¶ You can configure filters using dictConfig(), though it might not be obvious at first glance how to do it (hence this recipe). Since Filter is the only filter class included in the standard library, and it is unlikely to cater to many requirements (it’s only there as a base class), you will typically need to define your own Filter subclass with an overridden filter() method. To do this, specify the () key in the configuration dictionary for the filter, specifying a callable which will be used to create the filter (a class is the most obvious, but you can provide any callable which returns a Filter instance). Here is a complete example: import logging import logging.config import sys class MyFilter(logging.Filter): def __init__(self, param=None): self.param = param def filter(self, record): if self.param is None: allow = True else: allow = self.param not in record.msg if allow: record.msg = 'changed: ' + record.msg return allow LOGGING = { 'version': 1, 'filters': { 'myfilter': { '()': MyFilter, 'param': 'noshow', } }, 'handlers': { 'console': { 'class': 'logging.StreamHandler', 'filters': ['myfilter'] } }, 'root': { 'level': 'DEBUG', 'handlers': ['console'] }, } if __name__ == '__main__': logging.config.dictConfig(LOGGING) logging.debug('hello') logging.debug('hello - noshow')  This example shows how you can pass configuration data to the callable which constructs the instance, in the form of keyword parameters. When run, the above script will print: changed: hello  which shows that the filter is working as configured. A couple of extra points to note: • If you can’t refer to the callable directly in the configuration (e.g. if it lives in a different module, and you can’t import it directly where the configuration dictionary is), you can use the form ext://... as described in Access to external objects. For example, you could have used the text 'ext://__main__.MyFilter' instead of MyFilter in the above example. • As well as for filters, this technique can also be used to configure custom handlers and formatters. See User-defined objects for more information on how logging supports using user-defined objects in its configuration, and see the other cookbook recipe Customizing handlers with dictConfig() above. ## Customized exception formatting¶ There might be times when you want to do customized exception formatting - for argument’s sake, let’s say you want exactly one line per logged event, even when exception information is present. You can do this with a custom formatter class, as shown in the following example: import logging class OneLineExceptionFormatter(logging.Formatter): def formatException(self, exc_info): """ Format an exception so that it prints on a single line. """ result = super(OneLineExceptionFormatter, self).formatException(exc_info) return repr(result) # or format into one line however you want to def format(self, record): s = super(OneLineExceptionFormatter, self).format(record) if record.exc_text: s = s.replace('\n', '') + '|' return s def configure_logging(): fh = logging.FileHandler('output.txt', 'w') f = OneLineExceptionFormatter('%(asctime)s|%(levelname)s|%(message)s|', '%d/%m/%Y %H:%M:%S') fh.setFormatter(f) root = logging.getLogger() root.setLevel(logging.DEBUG) root.addHandler(fh) def main(): configure_logging() logging.info('Sample message') try: x = 1 / 0 except ZeroDivisionError as e: logging.exception('ZeroDivisionError: %s', e) if __name__ == '__main__': main()  When run, this produces a file with exactly two lines: 28/01/2015 07:21:23|INFO|Sample message| 28/01/2015 07:21:23|ERROR|ZeroDivisionError: integer division or modulo by zero|'Traceback (most recent call last):\n File "logtest7.py", line 30, in main\n x = 1 / 0\nZeroDivisionError: integer division or modulo by zero'|  While the above treatment is simplistic, it points the way to how exception information can be formatted to your liking. The traceback module may be helpful for more specialized needs. ## Speaking logging messages¶ There might be situations when it is desirable to have logging messages rendered in an audible rather than a visible format. This is easy to do if you have text-to-speech (TTS) functionality available in your system, even if it doesn’t have a Python binding. Most TTS systems have a command line program you can run, and this can be invoked from a handler using subprocess. It’s assumed here that TTS command line programs won’t expect to interact with users or take a long time to complete, and that the frequency of logged messages will be not so high as to swamp the user with messages, and that it’s acceptable to have the messages spoken one at a time rather than concurrently, The example implementation below waits for one message to be spoken before the next is processed, and this might cause other handlers to be kept waiting. Here is a short example showing the approach, which assumes that the espeak TTS package is available: import logging import subprocess import sys class TTSHandler(logging.Handler): def emit(self, record): msg = self.format(record) # Speak slowly in a female English voice cmd = ['espeak', '-s150', '-ven+f3', msg] p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT) # wait for the program to finish p.communicate() def configure_logging(): h = TTSHandler() root = logging.getLogger() root.addHandler(h) # the default formatter just returns the message root.setLevel(logging.DEBUG) def main(): logging.info('Hello') logging.debug('Goodbye') if __name__ == '__main__': configure_logging() sys.exit(main())  When run, this script should say « Hello » and then « Goodbye » in a female voice. The above approach can, of course, be adapted to other TTS systems and even other systems altogether which can process messages via external programs run from a command line. ## Buffering logging messages and outputting them conditionally¶ There might be situations where you want to log messages in a temporary area and only output them if a certain condition occurs. For example, you may want to start logging debug events in a function, and if the function completes without errors, you don’t want to clutter the log with the collected debug information, but if there is an error, you want all the debug information to be output as well as the error. Here is an example which shows how you could do this using a decorator for your functions where you want logging to behave this way. It makes use of the logging.handlers.MemoryHandler, which allows buffering of logged events until some condition occurs, at which point the buffered events are flushed - passed to another handler (the target handler) for processing. By default, the MemoryHandler flushed when its buffer gets filled up or an event whose level is greater than or equal to a specified threshold is seen. You can use this recipe with a more specialised subclass of MemoryHandler if you want custom flushing behavior. The example script has a simple function, foo, which just cycles through all the logging levels, writing to sys.stderr to say what level it’s about to log at, and then actually logging a message at that level. You can pass a parameter to foo which, if true, will log at ERROR and CRITICAL levels - otherwise, it only logs at DEBUG, INFO and WARNING levels. The script just arranges to decorate foo with a decorator which will do the conditional logging that’s required. The decorator takes a logger as a parameter and attaches a memory handler for the duration of the call to the decorated function. The decorator can be additionally parameterised using a target handler, a level at which flushing should occur, and a capacity for the buffer. These default to a StreamHandler which writes to sys.stderr, logging.ERROR and 100 respectively. Here’s the script: import logging from logging.handlers import MemoryHandler import sys logger = logging.getLogger(__name__) logger.addHandler(logging.NullHandler()) def log_if_errors(logger, target_handler=None, flush_level=None, capacity=None): if target_handler is None: target_handler = logging.StreamHandler() if flush_level is None: flush_level = logging.ERROR if capacity is None: capacity = 100 handler = MemoryHandler(capacity, flushLevel=flush_level, target=target_handler) def decorator(fn): def wrapper(*args, **kwargs): logger.addHandler(handler) try: return fn(*args, **kwargs) except Exception: logger.exception('call failed') raise finally: super(MemoryHandler, handler).flush() logger.removeHandler(handler) return wrapper return decorator def write_line(s): sys.stderr.write('%s\n' % s) def foo(fail=False): write_line('about to log at DEBUG ...') logger.debug('Actually logged at DEBUG') write_line('about to log at INFO ...') logger.info('Actually logged at INFO') write_line('about to log at WARNING ...') logger.warning('Actually logged at WARNING') if fail: write_line('about to log at ERROR ...') logger.error('Actually logged at ERROR') write_line('about to log at CRITICAL ...') logger.critical('Actually logged at CRITICAL') return fail decorated_foo = log_if_errors(logger)(foo) if __name__ == '__main__': logger.setLevel(logging.DEBUG) write_line('Calling undecorated foo with False') assert not foo(False) write_line('Calling undecorated foo with True') assert foo(True) write_line('Calling decorated foo with False') assert not decorated_foo(False) write_line('Calling decorated foo with True') assert decorated_foo(True)  When this script is run, the following output should be observed: Calling undecorated foo with False about to log at DEBUG ... about to log at INFO ... about to log at WARNING ... Calling undecorated foo with True about to log at DEBUG ... about to log at INFO ... about to log at WARNING ... about to log at ERROR ... about to log at CRITICAL ... Calling decorated foo with False about to log at DEBUG ... about to log at INFO ... about to log at WARNING ... Calling decorated foo with True about to log at DEBUG ... about to log at INFO ... about to log at WARNING ... about to log at ERROR ... Actually logged at DEBUG Actually logged at INFO Actually logged at WARNING Actually logged at ERROR about to log at CRITICAL ... Actually logged at CRITICAL  As you can see, actual logging output only occurs when an event is logged whose severity is ERROR or greater, but in that case, any previous events at lower severities are also logged. You can of course use the conventional means of decoration: @log_if_errors(logger) def foo(fail=False): ...  ## Formatting times using UTC (GMT) via configuration¶ Sometimes you want to format times using UTC, which can be done using a class such as UTCFormatter, shown below: import logging import time class UTCFormatter(logging.Formatter): converter = time.gmtime  and you can then use the UTCFormatter in your code instead of Formatter. If you want to do that via configuration, you can use the dictConfig() API with an approach illustrated by the following complete example: import logging import logging.config import time class UTCFormatter(logging.Formatter): converter = time.gmtime LOGGING = { 'version': 1, 'disable_existing_loggers': False, 'formatters': { 'utc': { '()': UTCFormatter, 'format': '%(asctime)s %(message)s', }, 'local': { 'format': '%(asctime)s %(message)s', } }, 'handlers': { 'console1': { 'class': 'logging.StreamHandler', 'formatter': 'utc', }, 'console2': { 'class': 'logging.StreamHandler', 'formatter': 'local', }, }, 'root': { 'handlers': ['console1', 'console2'], } } if __name__ == '__main__': logging.config.dictConfig(LOGGING) logging.warning('The local time is %s', time.asctime())  When this script is run, it should print something like: 2015-10-17 12:53:29,501 The local time is Sat Oct 17 13:53:29 2015 2015-10-17 13:53:29,501 The local time is Sat Oct 17 13:53:29 2015  showing how the time is formatted both as local time and UTC, one for each handler. ## Using a context manager for selective logging¶ There are times when it would be useful to temporarily change the logging configuration and revert it back after doing something. For this, a context manager is the most obvious way of saving and restoring the logging context. Here is a simple example of such a context manager, which allows you to optionally change the logging level and add a logging handler purely in the scope of the context manager: import logging import sys class LoggingContext(object): def __init__(self, logger, level=None, handler=None, close=True): self.logger = logger self.level = level self.handler = handler self.close = close def __enter__(self): if self.level is not None: self.old_level = self.logger.level self.logger.setLevel(self.level) if self.handler: self.logger.addHandler(self.handler) def __exit__(self, et, ev, tb): if self.level is not None: self.logger.setLevel(self.old_level) if self.handler: self.logger.removeHandler(self.handler) if self.handler and self.close: self.handler.close() # implicit return of None => don't swallow exceptions  If you specify a level value, the logger’s level is set to that value in the scope of the with block covered by the context manager. If you specify a handler, it is added to the logger on entry to the block and removed on exit from the block. You can also ask the manager to close the handler for you on block exit - you could do this if you don’t need the handler any more. To illustrate how it works, we can add the following block of code to the above: if __name__ == '__main__': logger = logging.getLogger('foo') logger.addHandler(logging.StreamHandler()) logger.setLevel(logging.INFO) logger.info('1. This should appear just once on stderr.') logger.debug('2. This should not appear.') with LoggingContext(logger, level=logging.DEBUG): logger.debug('3. This should appear once on stderr.') logger.debug('4. This should not appear.') h = logging.StreamHandler(sys.stdout) with LoggingContext(logger, level=logging.DEBUG, handler=h, close=True): logger.debug('5. This should appear twice - once on stderr and once on stdout.') logger.info('6. This should appear just once on stderr.') logger.debug('7. This should not appear.')  We initially set the logger’s level to INFO, so message #1 appears and message #2 doesn’t. We then change the level to DEBUG temporarily in the following with block, and so message #3 appears. After the block exits, the logger’s level is restored to INFO and so message #4 doesn’t appear. In the next with block, we set the level to DEBUG again but also add a handler writing to sys.stdout. Thus, message #5 appears twice on the console (once via stderr and once via stdout). After the with statement’s completion, the status is as it was before so message #6 appears (like message #1) whereas message #7 doesn’t (just like message #2). If we run the resulting script, the result is as follows: $ python logctx.py
1. This should appear just once on stderr.
3. This should appear once on stderr.
5. This should appear twice - once on stderr and once on stdout.
5. This should appear twice - once on stderr and once on stdout.
6. This should appear just once on stderr.


If we run it again, but pipe stderr to /dev/null, we see the following, which is the only message written to stdout:

$python logctx.py 2>/dev/null 5. This should appear twice - once on stderr and once on stdout.  Once again, but piping stdout to /dev/null, we get: $ python logctx.py >/dev/null
1. This should appear just once on stderr.
3. This should appear once on stderr.
5. This should appear twice - once on stderr and once on stdout.
6. This should appear just once on stderr.


In this case, the message #5 printed to stdout doesn’t appear, as expected.

Of course, the approach described here can be generalised, for example to attach logging filters temporarily. Note that the above code works in Python 2 as well as Python 3.