26.2. "pdb" — Le débogueur Python
*********************************

**Code source :** Lib/pdb.py

======================================================================

Le module "pdb" définit un débogueur de code source interactif pour
les programmes Python. Il supporte le paramétrage (conditionnel) de
points d’arrêt et l’exécution du code source ligne par ligne,
l’inspection des *frames* de la pile, la liste du code source, et
l’évaluation arbitraire de code Python dans le contexte de n’importe
quelle *frame* de la pile. Il supporte aussi le débogage post-mortem
et peut être contrôlé depuis un programme.

The debugger is extensible — it is actually defined as the class
"Pdb". This is currently undocumented but easily understood by reading
the source.  The extension interface uses the modules "bdb" and "cmd".

L’invite du débogueur est "(Pdb)". L’usage typique pour exécuter un
programme sous le contrôle du débogueur est :

   >>> import pdb
   >>> import mymodule
   >>> pdb.run('mymodule.test()')
   > <string>(0)?()
   (Pdb) continue
   > <string>(1)?()
   (Pdb) continue
   NameError: 'spam'
   > <string>(1)?()
   (Pdb)

Le fichier "pdb.py" peut aussi être invoqué comme un script pour
déboguer d’autres scripts. Par exemple :

   python -m pdb myscript.py

When invoked as a script, pdb will automatically enter post-mortem
debugging if the program being debugged exits abnormally. After post-
mortem debugging (or after normal exit of the program), pdb will
restart the program. Automatic restarting preserves pdb’s state (such
as breakpoints) and in most cases is more useful than quitting the
debugger upon program’s exit.

Nouveau dans la version 2.4: Restarting post-mortem behavior added.

L’usage typique pour forcer le débogueur depuis un programme
s’exécutant est d’insérer :

   import pdb; pdb.set_trace()

at the location you want to break into the debugger.  You can then
step through the code following this statement, and continue running
without the debugger using the "c" command.

L’usage typique pour inspecter un programme planté :

   >>> import pdb
   >>> import mymodule
   >>> mymodule.test()
   Traceback (most recent call last):
     File "<stdin>", line 1, in <module>
     File "./mymodule.py", line 4, in test
       test2()
     File "./mymodule.py", line 3, in test2
       print spam
   NameError: spam
   >>> pdb.pm()
   > ./mymodule.py(3)test2()
   -> print spam
   (Pdb)

Le module définit les fonctions suivantes; chacune entre dans le
débogueur d’une manière légèrement différente:

pdb.run(statement[, globals[, locals]])

   Execute the *statement* (given as a string) under debugger control.
   The debugger prompt appears before any code is executed; you can
   set breakpoints and type "continue", or you can step through the
   statement using "step" or "next" (all these commands are explained
   below).  The optional *globals* and *locals* arguments specify the
   environment in which the code is executed; by default the
   dictionary of the module "__main__" is used.  (See the explanation
   of the "exec" statement or the "eval()" built-in function.)

pdb.runeval(expression[, globals[, locals]])

   Evaluate the *expression* (given as a string) under debugger
   control.  When "runeval()" returns, it returns the value of the
   expression.  Otherwise this function is similar to "run()".

pdb.runcall(function[, argument, ...])

   Appelle la *function* (une fonction ou une méthode, pas une chaine
   de caractères) avec les arguments donnés. Quand "runcall()"
   revient, il retourne ce que l’appel de fonctionne a renvoyé.
   L’invite de débogage apparaît dès que la fonction est entrée.

pdb.set_trace()

   Entre le débogueur dans la *frame* de la pile d’appel. Ceci est
   utile pour coder en dur un point d’arrêt dans un programme, même si
   le code n’est pas autrement débogué (par exemple, quand une
   assertion échoue).

pdb.post_mortem([traceback])

   Entre le débogage post-mortem de l’objet *traceback* donné. Si
   aucun *traceback* n’est donné, il utilise celui de l’exception en
   cours de traitement (une exception doit être gérée si la valeur par
   défaut doit être utilisée).

pdb.pm()

   Entre le débogage post-mortem de la trace trouvé dans "sys.
   last_traceback".

Les fonctions "run*" et "set_trace()" sont des alias pour instancier
la classe "Pdb" et appeler la méthode du même nom. Si vous souhaitez
accéder à d’autres fonctionnalités, vous devez le faire vous-même :

class pdb.Pdb(completekey='tab', stdin=None, stdout=None, skip=None)

   Le classe du débogueur est la classe "Pdb".

   Les arguments *completekey*, *stdin* et *stdout* sont transmis à la
   classe sous-jacente "cmd.Cmd"; voir la description ici.

   L’argument *skip*, s’il est donné, doit être un itérable des noms
   de modules de style *glob*. Le débogueur n’entrera pas dans les
   *frames* qui proviennent d’un module qui correspond à l’un de ces
   motifs. [1]

   Exemple d’appel pour activer le traçage avec *skip* :

      import pdb; pdb.Pdb(skip=['django.*']).set_trace()

   Nouveau dans la version 2.7: L’argument *skip*.

   run(statement[, globals[, locals]])
   runeval(expression[, globals[, locals]])
   runcall(function[, argument, ...])
   set_trace()

      Voir la documentation pour les fonctions expliquées ci-dessus.


26.3. Commande du débogueur
***************************

The debugger recognizes the following commands.  Most commands can be
abbreviated to one or two letters; e.g. "h(elp)" means that either "h"
or "help" can be used to enter the help command (but not "he" or
"hel", nor "H" or "Help" or "HELP").  Arguments to commands must be
separated by whitespace (spaces or tabs).  Optional arguments are
enclosed in square brackets ("[]") in the command syntax; the square
brackets must not be typed. Alternatives in the command syntax are
separated by a vertical bar ("|").

Entering a blank line repeats the last command entered.  Exception: if
the last command was a "list" command, the next 11 lines are listed.

Les commandes que le débogueur ne reconnaît pas sont supposées être
des instructions Python et sont exécutées dans le contexte du
programme en cours de débogage. Les instructions Python peuvent
également être préfixées avec un point d’exclamation ("!"). C’est une
façon puissante d’inspecter le programme en cours de débogage; il est
même possible de changer une variable ou d’appeler une fonction.
Lorsqu’une exception se produit dans une telle instruction, le nom de
l’exception est affiché mais l’état du débogueur n’est pas modifié.

Multiple commands may be entered on a single line, separated by ";;".
(A single ";" is not used as it is the separator for multiple commands
in a line that is passed to the Python parser.) No intelligence is
applied to separating the commands; the input is split at the first
";;" pair, even if it is in the middle of a quoted string.

The debugger supports aliases.  Aliases can have parameters which
allows one a certain level of adaptability to the context under
examination.

If a file ".pdbrc"  exists in the user’s home directory or in the
current directory, it is read in and executed as if it had been typed
at the debugger prompt. This is particularly useful for aliases.  If
both files exist, the one in the home directory is read first and
aliases defined there can be overridden by the local file.

h(elp) [*command*]
   Without argument, print the list of available commands.  With a
   *command* as argument, print help about that command.  "help pdb"
   displays the full documentation file; if the environment variable
   "PAGER" is defined, the file is piped through that command instead.
   Since the *command* argument must be an identifier, "help exec"
   must be entered to get help on the "!" command.

w(here)
   Affiche une trace de pile, avec la *frame* le plus récent en bas.
   Une flèche indique le *frame* courant, qui détermine le contexte de
   la plupart des commandes.

d(own)
   Move the current frame one level down in the stack trace (to a
   newer frame).

u(p)
   Move the current frame one level up in the stack trace (to an older
   frame).

b(reak) [[*filename*:]*lineno* | *function*[, *condition*]]
   With a *lineno* argument, set a break there in the current file.
   With a *function* argument, set a break at the first executable
   statement within that function. The line number may be prefixed
   with a filename and a colon, to specify a breakpoint in another
   file (probably one that hasn’t been loaded yet). The file is
   searched on "sys.path". Note that each breakpoint is assigned a
   number to which all the other breakpoint commands refer.

   Si un second argument est présent, c’est une expression qui doit
   évaluer à *True* avant que le point d’arrêt ne soit honoré.

   Sans argument, liste tous les arrêts, incluant pour chaque point
   d’arrêt, le nombre de fois qu’un point d’arrêt a été atteint, le
   nombre de ignore, et la condition associée le cas échéant.

tbreak [[*filename*:]*lineno* | *function*[, *condition*]]
   Temporary breakpoint, which is removed automatically when it is
   first hit.  The arguments are the same as break.

cl(ear) [*filename:lineno* | *bpnumber* [*bpnumber …*]]
   Avec un argument *filename:lineno*, efface tous les points d’arrêt
   sur cette ligne. Avec une liste de numéros de points d’arrêt
   séparés par un espace, efface ces points d’arrêt. Sans argument,
   efface tous les points d’arrêt (mais demande d’abord confirmation).

disable [*bpnumber* [*bpnumber …*]]
   Disables the breakpoints given as a space separated list of
   breakpoint numbers. Disabling a breakpoint means it cannot cause
   the program to stop execution, but unlike clearing a breakpoint, it
   remains in the list of breakpoints and can be (re-)enabled.

enable [*bpnumber* [*bpnumber …*]]
   Enables the breakpoints specified.

ignore *bpnumber* [*count*]
   Sets the ignore count for the given breakpoint number.  If count is
   omitted, the ignore count is set to 0.  A breakpoint becomes active
   when the ignore count is zero.  When non-zero, the count is
   decremented each time the breakpoint is reached and the breakpoint
   is not disabled and any associated condition evaluates to true.

condition *bpnumber* [*condition*]
   Condition is an expression which must evaluate to true before the
   breakpoint is honored.  If condition is absent, any existing
   condition is removed; i.e., the breakpoint is made unconditional.

commands [*bpnumber*]
   Specify a list of commands for breakpoint number *bpnumber*.  The
   commands themselves appear on the following lines.  Type a line
   containing just “end” to terminate the commands. An example:

      (Pdb) commands 1
      (com) print some_variable
      (com) end
      (Pdb)

   To remove all commands from a breakpoint, type commands and follow
   it immediately with  end; that is, give no commands.

   Sans argument *bpnumber*, les commandes se réfèrent au dernier
   point d’arrêt défini.

   You can use breakpoint commands to start your program up again.
   Simply use the continue command, or step, or any other command that
   resumes execution.

   Specifying any command resuming execution (currently continue,
   step, next, return, jump, quit and their abbreviations) terminates
   the command list (as if that command was immediately followed by
   end). This is because any time you resume execution (even with a
   simple next or step), you may encounter another breakpoint—which
   could have its own command list, leading to ambiguities about which
   list to execute.

   Si vous utilisez la commande “silence” dans la liste des commandes,
   le message habituel concernant l’arrêt à un point d’arrêt n’est pas
   affiché. Ceci peut être souhaitable pour les points d’arrêt qui
   doivent afficher un message spécifique et ensuite continuer. Si
   aucune des autres commandes n’affiche quoi que ce soit, vous ne
   voyez aucun signe indiquant que le point de rupture a été atteint.

   Nouveau dans la version 2.5.

s(tep)
   Exécute la ligne en cours, s’arrête à la première occasion possible
   (soit dans une fonction qui est appelée, soit sur la ligne suivante
   de la fonction courante).

n(ext)
   Continue execution until the next line in the current function is
   reached or it returns.  (The difference between "next" and "step"
   is that "step" stops inside a called function, while "next"
   executes called functions at (nearly) full speed, only stopping at
   the next line in the current function.)

unt(il)
   Continue execution until the line with the line number greater than
   the current one is reached or when returning from current frame.

   Nouveau dans la version 2.6.

r(eturn)
   Continue l’exécution jusqu’au retour de la fonction courante.

c(ont(inue))
   Continue l’exécution, seulement s’arrête quand un point d’arrêt est
   rencontré.

j(ump) *lineno*
   Définit la prochaine ligne qui sera exécutée. Uniquement disponible
   dans la *frame* inférieur. Cela vous permet de revenir en arrière
   et d’exécuter à nouveau le code, ou de passer en avant pour sauter
   le code que vous ne voulez pas exécuter.

   It should be noted that not all jumps are allowed — for instance it
   is not possible to jump into the middle of a "for" loop or out of a
   "finally" clause.

l(ist) [*first*[, *last*]]
   List source code for the current file.  Without arguments, list 11
   lines around the current line or continue the previous listing.
   With one argument, list 11 lines around at that line.  With two
   arguments, list the given range; if the second argument is less
   than the first, it is interpreted as a count.

a(rgs)
   Affiche la liste d’arguments de la fonction courante.

p *expression*
   Évalue l”*expression* dans le contexte courant et affiche sa
   valeur.

   Note: "print" can also be used, but is not a debugger command —
     this executes the Python "print" statement.

pp *expression*
   Like the "p" command, except the value of the expression is pretty-
   printed using the "pprint" module.

alias [*name* [command]]
   Creates an alias called *name* that executes *command*.  The
   command must *not* be enclosed in quotes.  Replaceable parameters
   can be indicated by "%1", "%2", and so on, while "%*" is replaced
   by all the parameters.  If no command is given, the current alias
   for *name* is shown. If no arguments are given, all aliases are
   listed.

   Aliases may be nested and can contain anything that can be legally
   typed at the pdb prompt.  Note that internal pdb commands *can* be
   overridden by aliases. Such a command is then hidden until the
   alias is removed.  Aliasing is recursively applied to the first
   word of the command line; all other words in the line are left
   alone.

   Comme un exemple, voici deux alias utiles (spécialement quand il
   est placé dans le fichier ".pdbrc") :

      #Print instance variables (usage "pi classInst")
      alias pi for k in %1.__dict__.keys(): print "%1.",k,"=",%1.__dict__[k]
      #Print instance variables in self
      alias ps pi self

unalias *name*
   Deletes the specified alias.

[!]*statement*
   Execute the (one-line) *statement* in the context of the current
   stack frame. The exclamation point can be omitted unless the first
   word of the statement resembles a debugger command. To set a global
   variable, you can prefix the assignment command with a "global"
   command on the same line, e.g.:

      (Pdb) global list_options; list_options = ['-l']
      (Pdb)

run [*args* …]
   Restart the debugged Python program. If an argument is supplied, it
   is split with « shlex » and the result is used as the new sys.argv.
   History, breakpoints, actions and debugger options are preserved. «
   restart » is an alias for « run ».

   Nouveau dans la version 2.6.

q(uit)
   Quit from the debugger. The program being executed is aborted.

-[ Notes ]-

[1] La question de savoir si une *frame* est considérée comme
    provenant d’un certain module est déterminée par le "__name__"
    dans les globales de la *frame*.
