19.6. base64
— Base16, Base32, Base64, Base85 Data Encodings¶
Source code: Lib/base64.py
This module provides functions for encoding binary data to printable ASCII characters and decoding such encodings back to binary data. It provides encoding and decoding functions for the encodings specified in RFC 3548, which defines the Base16, Base32, and Base64 algorithms, and for the de-facto standard Ascii85 and Base85 encodings.
The RFC 3548 encodings are suitable for encoding binary data so that it can safely sent by email, used as parts of URLs, or included as part of an HTTP POST request. The encoding algorithm is not the same as the uuencode program.
There are two interfaces provided by this module. The modern interface
supports encoding bytes-like objects to ASCII
bytes
, and decoding bytes-like objects or
strings containing ASCII to bytes
. Both base-64 alphabets
defined in RFC 3548 (normal, and URL- and filesystem-safe) are supported.
The legacy interface does not support decoding from strings, but it does
provide functions for encoding and decoding to and from file objects. It only supports the Base64 standard alphabet, and it adds
newlines every 76 characters as per RFC 2045. Note that if you are looking
for RFC 2045 support you probably want to be looking at the email
package instead.
Distinto en la versión 3.3: ASCII-only Unicode strings are now accepted by the decoding functions of the modern interface.
Distinto en la versión 3.4: Any bytes-like objects are now accepted by all encoding and decoding functions in this module. Ascii85/Base85 support added.
The modern interface provides:
-
base64.
b64encode
(s, altchars=None)¶ Encode the bytes-like object s using Base64 and return the encoded
bytes
.Optional altchars must be a bytes-like object of at least length 2 (additional characters are ignored) which specifies an alternative alphabet for the
+
and/
characters. This allows an application to e.g. generate URL or filesystem safe Base64 strings. The default isNone
, for which the standard Base64 alphabet is used.
-
base64.
b64decode
(s, altchars=None, validate=False)¶ Decode the Base64 encoded bytes-like object or ASCII string s and return the decoded
bytes
.Optional altchars must be a bytes-like object or ASCII string of at least length 2 (additional characters are ignored) which specifies the alternative alphabet used instead of the
+
and/
characters.A
binascii.Error
exception is raised if s is incorrectly padded.If validate is
False
(the default), characters that are neither in the normal base-64 alphabet nor the alternative alphabet are discarded prior to the padding check. If validate isTrue
, these non-alphabet characters in the input result in abinascii.Error
.
-
base64.
standard_b64encode
(s)¶ Encode bytes-like object s using the standard Base64 alphabet and return the encoded
bytes
.
-
base64.
standard_b64decode
(s)¶ Decode bytes-like object or ASCII string s using the standard Base64 alphabet and return the decoded
bytes
.
-
base64.
urlsafe_b64encode
(s)¶ Encode bytes-like object s using the URL- and filesystem-safe alphabet, which substitutes
-
instead of+
and_
instead of/
in the standard Base64 alphabet, and return the encodedbytes
. The result can still contain=
.
-
base64.
urlsafe_b64decode
(s)¶ Decode bytes-like object or ASCII string s using the URL- and filesystem-safe alphabet, which substitutes
-
instead of+
and_
instead of/
in the standard Base64 alphabet, and return the decodedbytes
.
-
base64.
b32encode
(s)¶ Encode the bytes-like object s using Base32 and return the encoded
bytes
.
-
base64.
b32decode
(s, casefold=False, map01=None)¶ Decode the Base32 encoded bytes-like object or ASCII string s and return the decoded
bytes
.Optional casefold is a flag specifying whether a lowercase alphabet is acceptable as input. For security purposes, the default is
False
.RFC 3548 allows for optional mapping of the digit 0 (zero) to the letter O (oh), and for optional mapping of the digit 1 (one) to either the letter I (eye) or letter L (el). The optional argument map01 when not
None
, specifies which letter the digit 1 should be mapped to (when map01 is notNone
, the digit 0 is always mapped to the letter O). For security purposes the default isNone
, so that 0 and 1 are not allowed in the input.A
binascii.Error
is raised if s is incorrectly padded or if there are non-alphabet characters present in the input.
-
base64.
b16encode
(s)¶ Encode the bytes-like object s using Base16 and return the encoded
bytes
.
-
base64.
b16decode
(s, casefold=False)¶ Decode the Base16 encoded bytes-like object or ASCII string s and return the decoded
bytes
.Optional casefold is a flag specifying whether a lowercase alphabet is acceptable as input. For security purposes, the default is
False
.A
binascii.Error
is raised if s is incorrectly padded or if there are non-alphabet characters present in the input.
-
base64.
a85encode
(b, *, foldspaces=False, wrapcol=0, pad=False, adobe=False)¶ Encode the bytes-like object b using Ascii85 and return the encoded
bytes
.foldspaces is an optional flag that uses the special short sequence “y” instead of 4 consecutive spaces (ASCII 0x20) as supported by “btoa”. This feature is not supported by the «standard» Ascii85 encoding.
wrapcol controls whether the output should have newline (
b'\n'
) characters added to it. If this is non-zero, each output line will be at most this many characters long.pad controls whether the input is padded to a multiple of 4 before encoding. Note that the
btoa
implementation always pads.adobe controls whether the encoded byte sequence is framed with
<~
and~>
, which is used by the Adobe implementation.Nuevo en la versión 3.4.
-
base64.
a85decode
(b, *, foldspaces=False, adobe=False, ignorechars=b' \t\n\r\v')¶ Decode the Ascii85 encoded bytes-like object or ASCII string b and return the decoded
bytes
.foldspaces is a flag that specifies whether the “y” short sequence should be accepted as shorthand for 4 consecutive spaces (ASCII 0x20). This feature is not supported by the «standard» Ascii85 encoding.
adobe controls whether the input sequence is in Adobe Ascii85 format (i.e. is framed with <~ and ~>).
ignorechars should be a bytes-like object or ASCII string containing characters to ignore from the input. This should only contain whitespace characters, and by default contains all whitespace characters in ASCII.
Nuevo en la versión 3.4.
-
base64.
b85encode
(b, pad=False)¶ Encode the bytes-like object b using base85 (as used in e.g. git-style binary diffs) and return the encoded
bytes
.If pad is true, the input is padded with
b'\0'
so its length is a multiple of 4 bytes before encoding.Nuevo en la versión 3.4.
-
base64.
b85decode
(b)¶ Decode the base85-encoded bytes-like object or ASCII string b and return the decoded
bytes
. Padding is implicitly removed, if necessary.Nuevo en la versión 3.4.
Nota
Both Base85 and Ascii85 have an expansion factor of 5 to 4 (5 Base85 or Ascii85 characters can encode 4 binary bytes), while the better-known Base64 has an expansion factor of 6 to 4. They are therefore more efficient when space expensive. They differ by details such as the character map used for encoding.
The legacy interface:
-
base64.
decode
(input, output)¶ Decode the contents of the binary input file and write the resulting binary data to the output file. input and output must be file objects. input will be read until
input.readline()
returns an empty bytes object.
-
base64.
decodebytes
(s)¶ Decode the bytes-like object s, which must contain one or more lines of base64 encoded data, and return the decoded
bytes
.Nuevo en la versión 3.1.
-
base64.
decodestring
(s)¶ Deprecated alias of
decodebytes()
.Obsoleto desde la versión 3.1.
-
base64.
encode
(input, output)¶ Encode the contents of the binary input file and write the resulting base64 encoded data to the output file. input and output must be file objects. input will be read until
input.read()
returns an empty bytes object.encode()
inserts a newline character (b'\n'
) after every 76 bytes of the output, as well as ensuring that the output always ends with a newline, as per RFC 2045 (MIME).
-
base64.
encodebytes
(s)¶ Encode the bytes-like object s, which can contain arbitrary binary data, and return
bytes
containing the base64-encoded data, with newlines (b'\n'
) inserted after every 76 bytes of output, and ensuring that there is a trailing newline, as per RFC 2045 (MIME).Nuevo en la versión 3.1.
-
base64.
encodestring
(s)¶ Deprecated alias of
encodebytes()
.Obsoleto desde la versión 3.1.
An example usage of the module:
>>> import base64
>>> encoded = base64.b64encode(b'data to be encoded')
>>> encoded
b'ZGF0YSB0byBiZSBlbmNvZGVk'
>>> data = base64.b64decode(encoded)
>>> data
b'data to be encoded'
Ver también
- Module
binascii
- Support module containing ASCII-to-binary and binary-to-ASCII conversions.
- RFC 1521 - MIME (Multipurpose Internet Mail Extensions) Part One: Mechanisms for Specifying and Describing the Format of Internet Message Bodies
- Section 5.2, «Base64 Content-Transfer-Encoding,» provides the definition of the base64 encoding.