4.4.1 SequenceMatcher Objects

The `SequenceMatcher` class has this constructor:

**class**([`SequenceMatcher``isjunk`[`, a`[`, b`]]])-
Optional argument
`isjunk`must be`None`

(the default) or a one-argument function that takes a sequence element and returns true if and only if the element is ``junk'' and should be ignored. Passing`None`

for`b`is equivalent to passing`lambda x: 0`

; in other words, no elements are ignored. For example, pass:lambda x: x in " \t"

if you're comparing lines as sequences of characters, and don't want to synch up on blanks or hard tabs.

The optional arguments

`a`and`b`are sequences to be compared; both default to empty strings. The elements of both sequences must be hashable.

`SequenceMatcher` objects have the following methods:

(`set_seqs``a, b`)- Set the two sequences to be compared.

`SequenceMatcher` computes and caches detailed information about
the second sequence, so if you want to compare one sequence against
many sequences, use `set_seq2()` to set the commonly used
sequence once and call `set_seq1()` repeatedly, once for each
of the other sequences.

(`set_seq1``a`)- Set the first sequence to be compared. The second sequence to be compared is not changed.

(`set_seq2``b`)- Set the second sequence to be compared. The first sequence to be compared is not changed.

(`find_longest_match``alo, ahi, blo, bhi`)-
Find longest matching block in

and`a`[`alo`:`ahi`]

.`b`[`blo`:`bhi`]If

`isjunk`was omitted or`None`

,`get_longest_match()`returns`(`

such that`i`,`j`,`k`)

is equal to`a`[`i`:`i`+`k`]

, where`b`[`j`:`j`+`k`]

and`alo`<=`i`<=`i`+`k`<=`ahi`

. For all`blo`<=`j`<=`j`+`k`<=`bhi``(`

meeting those conditions, the additional conditions`i'`,`j'`,`k'`)

,`k`>=`k'`

, and if`i`<=`i'`

,`i`==`i'`

are also met. In other words, of all maximal matching blocks, return one that starts earliest in`j`<=`j'``a`, and of all those maximal matching blocks that start earliest in`a`, return the one that starts earliest in`b`.>>> s = SequenceMatcher(None, " abcd", "abcd abcd") >>> s.find_longest_match(0, 5, 0, 9) (0, 4, 5)

If

`isjunk`was provided, first the longest matching block is determined as above, but with the additional restriction that no junk element appears in the block. Then that block is extended as far as possible by matching (only) junk elements on both sides. So the resulting block never matches on junk except as identical junk happens to be adjacent to an interesting match.Here's the same example as before, but considering blanks to be junk. That prevents

`' abcd'`

from matching the`' abcd'`

at the tail end of the second sequence directly. Instead only the`'abcd'`

can match, and matches the leftmost`'abcd'`

in the second sequence:>>> s = SequenceMatcher(lambda x: x==" ", " abcd", "abcd abcd") >>> s.find_longest_match(0, 5, 0, 9) (1, 0, 4)

If no blocks match, this returns

`(`

.`alo`,`blo`, 0)

()`get_matching_blocks`-
Return list of triples describing matching subsequences.
Each triple is of the form
`(`

, and means that`i`,`j`,`n`)

. The triples are monotonically increasing in`a`[`i`:`i`+`n`] ==`b`[`j`:`j`+`n`]`i`and`j`.The last triple is a dummy, and has the value

`(len(`

. It is the only triple with`a`), len(`b`), 0)

.`n`== 0>>> s = SequenceMatcher(None, "abxcd", "abcd") >>> s.get_matching_blocks() [(0, 0, 2), (3, 2, 2), (5, 4, 0)]

()`get_opcodes`-
Return list of 5-tuples describing how to turn
`a`into`b`. Each tuple is of the form`(`

. The first tuple has`tag`,`i1`,`i2`,`j1`,`j2`)

, and remaining tuples have`i1`==`j1`== 0`i1`equal to the`i2`from the preceeding tuple, and, likewise,`j1`equal to the previous`j2`.The

`tag`values are strings, with these meanings:**Value****Meaning**`'replace'`

should be replaced by`a`[`i1`:`i2`]

.`b`[`j1`:`j2`]`'delete'`

should be deleted. Note that`a`[`i1`:`i2`]

in this case.`j1`==`j2``'insert'`

should be inserted at`b`[`j1`:`j2`]

. Note that`a`[`i1`:`i1`]

in this case.`i1`==`i2``'equal'`

(the sub-sequences are equal).`a`[`i1`:`i2`] ==`b`[`j1`:`j2`]For example:

>>> a = "qabxcd" >>> b = "abycdf" >>> s = SequenceMatcher(None, a, b) >>> for tag, i1, i2, j1, j2 in s.get_opcodes(): ... print ("%7s a[%d:%d] (%s) b[%d:%d] (%s)" % ... (tag, i1, i2, a[i1:i2], j1, j2, b[j1:j2])) delete a[0:1] (q) b[0:0] () equal a[1:3] (ab) b[0:2] (ab) replace a[3:4] (x) b[2:3] (y) equal a[4:6] (cd) b[3:5] (cd) insert a[6:6] () b[5:6] (f)

()`ratio`-
Return a measure of the sequences' similarity as a float in the
range [0, 1].
Where T is the total number of elements in both sequences, and M is the number of matches, this is 2.0*M / T. Note that this is

`1.0`

if the sequences are identical, and`0.0`

if they have nothing in common.This is expensive to compute if

`get_matching_blocks()`or`get_opcodes()`hasn't already been called, in which case you may want to try`quick_ratio()`or`real_quick_ratio()`first to get an upper bound.

()`quick_ratio`-
Return an upper bound on
`ratio()`relatively quickly.This isn't defined beyond that it is an upper bound on

`ratio()`, and is faster to compute.

()`real_quick_ratio`-
Return an upper bound on
`ratio()`very quickly.This isn't defined beyond that it is an upper bound on

`ratio()`, and is faster to compute than either`ratio()`or`quick_ratio()`.

The three methods that return the ratio of matching to total characters
can give different results due to differing levels of approximation,
although `quick_ratio()` and `real_quick_ratio()` are always
at least as large as `ratio()`:

>>> s = SequenceMatcher(None, "abcd", "bcde") >>> s.ratio() 0.75 >>> s.quick_ratio() 0.75 >>> s.real_quick_ratio() 1.0

See